RC-14-1624 (8). /Y? 0AlF-y
mi Shores Village
OCT 5. 0
Building Department
10050 N.E.2nd Avenue,Miami Shores,Florida 33138
Tab(305)795-2204 Fa=(305)756-8972
WJSPECrION UNE PHONE NUVADER:(305)762.4949
FBC 2014
UlLDING Master Permit Mo. RC-7-14-1624
PERMIT APPLICATION Sub Permit lY6. RF-1-15-47
❑BUILDING ❑ELECTRIC ® ROOFING ® REVISION [3 EXTENSION ORENEWAL
❑PLUMBING O MEGHANICAL [PUBLIC WORKS O CHANGE OF []CANCELLATION ❑SHOP
CONTRACTOR DRAWINGS
MADDRESS: 1032 NE 98th STREET
ismi Shwas Cawbr MfaffQI Daft 33138
r•.oa ftmee:1132050180320 Is#0 60ding MftficallY Dom;yes No
OccuPancY Type: Load:_Construction Type:_Flood Zone: BFE FFE:
OWNER;Name(Fee Simple Titleholder); 1032 NE 98th HOLDINGS LLC ;
Address: 800 CORPORATE DRIVE
FT. LAUDERDALE State: FLOIRDA 33334
Zip:
Tenant/Lessee Name: N/A Phi
Erna: WA
cowl ACTOR:Company Name: LATITE ROOFING Phoma, 954-772-3446
Address; 2280 WEST COPANS ROAD
caty. POMPANO BEACH Stage: FLORIDA 21p.33069
Quamer Name; CONNIE SCOTT
-Phoneo. 954.772_3446 x317
State Certification or R ration* CCC1326510 Certtfimte of ComPetencY e;
DESIGNER Architect/Engineer: Phone#;
Address: CKT. State: ZIP:
Valaw of work for Mis Penift$Same as originally permitted SquarqjUnegr Fo0ap et Woe6: 3600
roe of Work ❑ Addition 0 Alteration ❑ New ❑ Repair/Replace ❑ Demolition
Dewiptionofworlc R i ION:Oridnally permitted roofing tile as Ente re Bella"S". Tile to be
installed Is Entecira Estate SubmitlinA corrected NOA§ion D&E of HVHZ
Specify color of color thriu tile; Monterey Blend
Submhtal Fee 5 Permit Pee$ CCF$ GQ/CC$
Scanning fele$ Radon Fee S DBPR$ Notary$
Tedvobgy Fee TrambWEilucation Fee$ Double Fee$
Structural Reviews$ Bond$
tRewsed02/24/2014I TOTAL FEE NOW DUE$
BmWing Compant/s Name(if applicable)
Bonding Company's Address
City State Zip
Mortgage Lender's Name(if applicable)
Mortgage lender's Address
city State Zip
Appy to hereby made to obtain a permit to do the work and Installations as indicated. I certify that no work or Instariation has
commenced prior to the Issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in ft jurk"on. i understand that a separate permit must be secured for ELECTRIC, PLUMBING, SIGNS, POOL
FURNACES,BOILERS,HEATERS,TANKS,AIR CONDITIONERS,ETC..».
OWN M AFFIDAVIT: I certify that all the foregoing information Is accurate and that all work will be done in compliance with all
applicable laws regulating construction and toning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCING,CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING
YOUR NOTICE OF COMMENCEMENT."
Wertice to Appikant: As a corndito to the issuance of a buh%o permit wita an esdnmted value exwedbg b75M the applicant must
promise In goortfaft that a copy of tae notice of coram comment and construction Nen law bmdiure v,*1 be delivered to the person
whose pm'perty is sL*Ja to attachment: Also,a certified copy of the recorded notiee of comrra"cement must be posted at bre Job site
for the}tst inspeetbn which o= s seven(7)dap ofi er the bulft permit b issued. In the ataenca of such posted notice, Nie
inspertlon wgl not he approved and a reinspection fee wiN be charged.
Signature_\� slam
OWnuER or AGENT CTOR
The foregoing Instrument was acmawledged before me this The foregoing Instru merit was acknowledged before me this
Er1,
day IC' 20,S by day of T® € 20 15 ,by
who is personally known to Connie Scottwho is personally known to
me or who has produced as me or who has produced
s
as
Identification and who did take an oath. Identification and who did take an oath.
NOTARY PU6LK: NOTARY PUStIt:.°
Sign:
Print: • JPF
Print: Mimi Allbritton =y: N r g'p=
CD
Seal: � w. ' Heder Mu ��: z o a
S y 2•
COMISM
r Wilt MaY 21, 218 /�1�0,9i•.......••'
poo
-Zoning APPROVED 8Y •-- 7�+.r p��Examh►er Zoning
Structural Review _ Cleric
IostLeho>,e)
1. �f
ROOF ASSEM13UEB AND ROOFTOP STRUCTURES
OCT 15 2015 Florida Building Code Edition 2014
High-Velocity Hurricane Zone Uniform Permit Appgcedon Form.
_ Section D (Steep Sloped Roof System)
Roof System Manufacturer: ENTEGRA ROOF TILE, LLC
Notice of Acceptance Number: 14-1120.08
Minimum Design Wind Pressures, If Applicable{From RAS 127 or
Calculations.):
1: -39.1 P2: -68.1 P3: -100.7
INSTALL TILE WITH POLYFOAM
%all Steep SlgIaed Roof System Description : .... .•
...... .... ......
COP .... . .....
beoic Type: 5/8" PLYWOOD •••••• ••:••'
Rof Slope:
Type Underiayment 1 #30 •
• ••••••
12
Insulation: N/A •• ••• • •
Fire Barrier: N/A
Ridge Ventilation? Fastener Type&Spacing: -� - KING 1�—ANP
--».N/A. NAIL S 6-9D I APS R 19"IN FIFI n f
Adhesive Type: N/A
fft Type cap sheet: olygiass TU Max
Mean Root Haight: 14' � Root kering: ra Estate "S"
Type&Size Drip "X3" 26 GA
Edge. Galvanized
Miami Shores Village
APPROVED BY DATE
ZONING DEPT
I� ULIJU DEPT
I I O c:MIPI IANCF WITH ALL FEDERAL FLORIDA BUILDING CODEbth EdWon (2014) —BUILDINe
'^.!i n !n .',i'^livltl!IFSANORE-CiUTATIONS
ROOF ASSEMBLIES AND ROOFTOP STRUCTURES
Florida Building Code 5th Edition (2014)
High4blocity Hurricane Zone Uniform Penna Apppcation Folin.
Rection E (Tile Calculations)
Far Moment based file systems,choose eLbarMedwA 1 or 2.Compere the values flu Mr with the values from rip if the M f values are grestetthan or
equal to tis Mr values,for each area of the roof.than the too sttechummi method is acceptable.
Method I"Moment Based Tile Calcrdafwas Per RAS 127"
(Pt:39.1_x),Q289. 11.29-mg- 74 =Mr14.55 P-dMAppr vWMf45.5
(p2r68.1 x3,0.289=19.681_Mg:6.74 =Ma12.94 Prodaa Approval Mf 45.5
(p3;100.7x 3,0.289=29.1 q-mr 6.74 =Mr3 22.36 Pradnct Approval Mf 45.5
Medved 2"Simplified Mie Calculations PerTabhe Below"
Rapped Momeru of Rwfstauoe(Mt)From Table Below Product Approval Ah
Mt required Moment Reeletanae*
Mean Roof Nalght-►
Roof Slope 20' 26' 30' 40'
2:12 34.4 36.6 38,2 39,7 42.2
3:12 32.2 34A 38.0 37.4 38.8 • •
4:12 30A 322 33.8 38.1 � • 37.3 • 001 ••
•
6:12 20A 30.1 31.6 S2A • 0
34.9 ••• 00• •
• •• ••
6:12 26A 28.0 29A 30.6 • 32A • •
7:12 24A 26.6 27.1 28.2 • •• 30.0 • • i• •i
•••
•Most be used in conjunction with a list of momant based the systems endorsed by the Broward County Board of Roles aA'Mppeals. • •• •
•
•••••• • ••• •• •
ForUpliflb�dthe systems noMethad3.Compared the vahmforPwith tbovaiuesforFr.IftheFvdmamgreater th00*00I0 tbeFrvM;w: •
• •• ••
for eadt area�the mol,then the file aCachntent method is acceptable. •
Method 3 1vloment Based Tire Caleulatimnc Pea RAS 12r • • • •
• • • • •• ••
(Pt: x L x w:= -W. x cos 9 =Fri Product Approval F:�• 0••••• • •
e •• ••
(P2: X L a X W:_ -w• x cos B =Fr2- Pwdud Approval F,
• • •
(P3: x L = x w:a___).W; x cos 0 a Frg Product Approval F 00 0
Where to Obtaln Information
Description ymbol Where to find
Design Preessuo Pl or P2or P3 RAS 127 Table 1 orby an meneodng aoatysie pmpmvd by PE based en ASCE 7
Mean Roof Height H Job Site
Roof Slope B Job Site
Aerodynamic Multiplier A product Approval
Rearming Moment due toM9 Pzodw Approval
Gravity
Attachment Reduarm Mf Pmdact Approval
Required Moment Resistance M
Minimam Aunchvicat
F Prod=Approval
Required Uplift Resistance Fr CW=h ted
Average 1%weigh W IPMdMAFluovat
151aDime rots W= Approval
All caiculadow moat be submitted to the buitdhrg official at floe time of permit application.
FLORIDA BUILDING CODE 5ffi Edition (2014)-BUILDING 15.38
MIAMI-DADE COUNTY
NIS PRODUCT CONTROL SECTION
11805 SW 26 Street,Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) Miami,Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T(786)315-2590 F(786)315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.aoy/economy
Entegra Roof Tile,LLC
1289 NE 9'h Ave
Okeechobee,FL.34972
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section
(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke,emodify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right tpr;evoke tis acceptaaee,•:•
if it is determined by Miami-Dade County Product Control Section that this product of 1nalbrial fat fo.meet the•
...... .
.... ......
requirements of the applicable building code. •••:•• •
This product is approved as described herein, and has been designed to comply with 4e•Floridar Building G�vire •:
P PP � P Y ......
including the High Velocity Hurricane Zone of the Florida Building Code. •••• ••:•••
...... . ... .....
.. .. .. . ......
DESCRIPTION: Estate"S"Tile ......
. . . . ......
LABELING: Each unit shall bear a permanent label with the manufacturer's name or 1®go,•eity, stake'ani •
statement: "Miami-Dade County Product Control Approved",unless otherwise noted herein•• 0 • :9: •
•• •
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales,advertising or any other purposes shall automatically terminate this NOA.Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revises NOA# 11-0510.02 and consists of pages 1 through 6.
The submitted documentation was reviewed by Alex Tigera.
MIAME�E 4 NOA No.14-1120.08
1APPROVED1 Expiration Date: 08/23/16
Approval Date:06/18/15
Page 1 of 6
ROOFING ASSEMBLY APPROVAL
Category: Roofing
Sub Category: Roofing Tiles
Material: Concrete
1. SCOPE
This approves a roofing system using Entegra Estate KS"Concrete Roof Tile,as manufactured by Entegra Roof Tile,
LLC. in Okeechobee,FL. as described in Section 2 of this Notice of Acceptance, designed to comply with the Florida
Building Code for High Velocity Hurricane Zone.For the locations where the pressure requirements,as determined by
applicable Building Code, does not exceed the design pressure values obtain by calculations in compliance with RAS
127 using the values listed in section 4 herein. The attachment calculations shall be done as a moment based system.
2. PRODUCT DESCRIPTION
Manufactured by Dimensions Test Product
Applicant Specifications Description
Entegra Estate`S' Roof 1= 16-1/2" TAS 112 Low profile,interlocking,extruded
Tile w= 13" concrete roof tile equippIdew1b two nail
hole and do* jeorvll ribs�� direct aec�:
or battened pal.-q4,morftWArddhesivq, •
set applications:..
Trim Pieces 1=varies TAS 112 Accessory tr1We ncreteroof pieces fed•••
w=varies use at hips,tU&?,ridges dhc:f1lley See**
varying thickness terminations.0 ffanufactAd f r eacff li'18:'
profile. •••• •
2.1 MANUFACTURING LOCATION •• • •• ;•; •
1. Okeechobee,FL.
2.2 EVIDENCE SUBMITTED:
Test Agency Test Identifier Test Name/Report Date
Redland Technologies 7161-03 PA 102 Dec. 1991
7161-03 PA 102(A) Dec. 1991
7161-03 PA 108 Dec. 1991
P0402 Withdrawal Resistance Testing of Sept. 1993
screw vs.smooth shank nails
P0631-01 PA 108 July 1994
Letter Dated Aug. 1, 1994 PA 108 Aug. 1994
Professional Service 224-47099 PA 112 Sept. 1994
Industries,Inc.
The Center for Applied 94-060B PA 101 March, 1994
Engineering,Inc. 94-084 PA 101 May 1994
25-7094-1 PA 102 Oct. 1994
NOA No.14-1120.08
�O courrrr Expiration Date: 08/23/16
Approval Date:06/18/15
Page 2 of 6
2.2 EVIDENCE SUBMITTED:
Test Aaencv Test Identifier Test Name/Report Date
25-7094-7 PA 102 Oct. 1994
25-7094-4 PA 102 Oct. 1994
Project No.307025 PA 100 Oct. 1994
Test#MDC-76
25-7183-1 PA 102 Feb. 1995
25-7183-2 PA 102 Feb. 1995
25-7214-2 PA 102 March, 1995
25-7214-6 PA 102 March, 1995
Celotex Corporation 528454-2-1 PA 101 Sep. 1998
Testing Services 520109-2 Dec. 1998
Walker Engineering,Inc. Calculations Aerodynamic Multiplier March 1999
IBA Consultants,Inc. 2381-264 TAS 112 01/08/08
3. LIlVIITATIONS:
3.1 Fire classification is not part of this acceptance.
3.2 For mortar or adhesive set tile applications,a static field uplift test in accordance with TAS 106 may
required,refer to applicable building code.
3.3 Applicant shall retain the services of a Miami-Dade County Certified Laboratory to perform quarterly test in
accordance with TAS 112,appendix`A'.Such testing shall be submitted to the Building and Neighborhood
Compliance Department—Product Control Section for review.
3.4 Minimum underlayment shall be in compliance with the applicable Roofing Applications Standards listed
section 4.1 herein.
3.5 30/90 hot mopped underlayment applications may be installed perpendicular to the roof slope unless stated
otherwise by the underlayment material manufacturers published literature.
3.6 This acceptance is for wood deck applications. Minimum deck requirements shall be in compliance with
applicable building code.
...... .... ......
.... . .....
...... . ... .....
.. .. .. . ......
. . . . ......
NOA No.14-1120.08
APPROVED Expiration Date: 08/23/16
Approval Date:06/18/15
Page 3 of 6
4. INSTALLATION
4.1 Entegra Estate"S"Concrete Roof Tile and its components shall be installed in strict compliance with Miami
Dade County Roofing Application Standard RAS 118,RAS 119,and RAS 120.
4.2 Data For Attachment Calculations.
Table 1: Average Weight(W) and Dimensions (I x w)
Tile Profile Weight-W(lbf) Length-1 (ft) Width-w(ft)
Entegra Estate'S' Roof Tile 10.0 1 1.375 1.08
Table 2: Aerodynamic Multipliers-.%(ft3)
Tile %(ft3) X(ft3)
Profile Batten Application Direct Deck Application
,Entegra Estate 'S' Roof Tile 0.267 0.289
Table 3: Restoring Moments due to Gravity-M9 (ft-lbf)
Tile 3":12" 4":12" 6":12" 6":12" Greater than
Profile 7":12"
Entegra Estate Battens Direct Battens Direct Battens Direct Battens Direct Battens Direct
'S' Roof Tile Deck Deck Deck Deck Deck
5.91 6.74 5.82 6.64 5.70 6.50 5.56 6.33 5.40 6.14
Table 4: Attachment Resistance Expressed as a Moment-Mf(ft-lbf)
for Nall-On Systems
Tile Fastener Type Direct Deck Direct Deck Battens
Profile (min 16132" plywood) (min. 19/32" plywood)
Entegra 2-10d Ring Shank Nails 27.8 37.4 28.8
Estate'S' 1-10d Smooth or Screw 8.8 11.8 4.1
Roof Tile Shank Nail2
2-10d Smooth or Screw 16.4 21.9 7.1
Shank Nails
1 #8 Screws 25.8 25.8 •••• .9 ••
2#8 Screw 47.1 47.1 • •649.1
1-10d Smooth or Screw 24.3 24.3 '...94.2 .•• •
Shank Nail Field Cli 2 090:0. 9 •
1-10d Smooth or Screw 19.0 19.0 ;00022.1 '
Shank Nail Eave Cli 2 •••• "0 '.
2-10d Smooth or Screw 35.5 35.5 ": 0.• .8 •
Shank Nails Field Clip) •0 0 0 0
• ' .
2-10d Smooth or Screw 31.9 31.9 0 9 . 32.2 ... :
Shank Nails Eave Clip) 0 9 :0909* 0
.9 . . 999 . 9
2-10d Ring Shank Nails' 43.0 67.5 " 50.9
1 Installation with a 4"tile headlap and fasteners are located a min. of 2Y2"from head of tile.
2 When using only one fastener use the hole that is approAmately 4-3/4'away from interlocking edge.
NOA No.14-1120.08
Expiration Date: 08/23/16
Approval Date:06/18/15
Page 4 of 6
Table 5: Attachment Resistance Expressed as a Moment Mf(ft-lbf)
for Two Patty Adhesive Set Systems
Tile Tile Application Minimum Attachment Resistance
Profile
Entegra Estate'S' Roof Tile Adhesive 26.14
3 See manufactures component approval for installation requirements.
4 Flexible Products Company TileBond Average weight per patty 11.4 grams.
3M'"2-Component Foam Roof Tile Adhesive AH-160 Average weight pera 8 grams.
Table 6: Attachment Resistance Expressed as a Moment-Mf(ft-lbf)
for Single Patty Adhesive Set Systems
Tile Tile Application Minimum Attachment
Profile Resistance
Entegra Estate 'S' Roof 3M'"2-Component Foam Roof Tile Adhesive AH-160 86.615
Tile 31017" 2-Component Foam Roof Tile Adhesive AH-160 45.58
5 Large paddy placement of 54 grams of 3M'"2-Component Foam Roof Tile Adhesive AH-160
6 Medium paddy placement of 24 grams of 3M'"2-Component Foam Roof Tile Adhesive AH-160.
Table 7:Attachment Resistance Expressed as a Moment-Mf(ft-lbf)
for Mortar or Adhesive Set Systems
Tile Tile Application Minimum Attachment
Profile Resistance
Entegra Estate 'S' Mortar Set 20.60
Roof Tile
5. LABELING
All tiles shall bear the imprint or identifiable marking of the manufacturer's name or logo as seen below or following
statement: "Miami-Dade County Product Control Approved".
..6..6
. . 0000..
. . 0
.. . 0000 0
0.0.00 006:60 .600.0
OR0000.. .
0000..
0000
. .0000.
0000 . 0000.
6.... ... 0000.
. .
. .. 0 0000..
• 0 •
. . •
0000..
0000..
❑
ENTEURR . . .0 000 0000.
. .
ESTATE"S"TILE LABEL(LOCATED ON UNDERSIDE OF TILE)
NOA No.14-1120.08
__]APPROVED Expiration Date: 08/23/16
Approval Date:06/18/15
Page 5 of 6
6. BUILDING PERMIT REQUIREMENTS:
6.1 Application for building permit shall be accompanied by copies of the following:
6.1.1 This Notice of Acceptance.
6.1.2 Any other documents required by Building Official or Applicable building code in order to
properly evaluate the installation of this system.
PROFILE DRAWING
Nail Holes
•
•
16,1/2��
...... .... ......
.... .0000 0 .•.. •
•
.
ENTEGRA ESTATE"S"CONCRETE ROOF TILE ":": •0 :0: *0:0
09
END OF THIS ACCEPTANCE ...,:.
•• .
NOA No.14-1120.08
J APPRO EDI_ Expiration Date: 08/23/16
Approval Date:06/18/15
Page 6 of 6
R( I
Inspection Worksheet
Miami Shores Village
10050 N.E.2nd Avenue Miami Shores,FL
Phone: (305)795-2204 Fax: (305)756-8972
Inspection Number: INSP-252438 Permit Number: RF-1-15-47
Scheduled Inspection Date: February 11,2016 Permit Type: Roof
Inspector: Rodriguez,Jorge Inspection Type: Final Roof
Owner: , Work Classification: Tile
Job Address:1032 NE 98 Street
Miami Shores,FL 33138- Phone Number
Parcel Number 1132050180320
Project <NONE>
Contractor: LATITE ROOFING&SHEET METAL COMPANY Phone: 954772-3446
Building Department Comments
RE-ROOF NEW TILE ROOF Infractio Passed Comments
INSPECTOR COMMENTS False
Inspector Comments
Passed CREATED AS REINSPECTION FOR INSP-226284. ROOF OK
Missing renailing affidavit
Failed
Correction
Needed
Re-Inspection
Fee
No Additional Inspections can be scheduled until
re-inspection fee is paid
February 10,2016 For Inspections please call: (305)762.4949 Page 25 of 38
OR
all VeAm"eW
10050 NE 2nd Ave
h��0as
Miami Shores,FI 33138
RPhone 305.795.2204;Fax 305756.8972
wruwv.miamishoresvillage.com
RE: Permit# DATE:
INSPECTION AFFID"IT
I (ONMG 9W7- , licensed as aContractor Engineer/Architect,
(Print name and circle License Type) FS 468 Building Inspector
License#: eL' 32 6 510
s ,n St 44At I"Spte-h W. or
On or about , I did personally iet the roof deck nailing and/or
(Date&time)
secondanr water barrier work at 1032 AIE 0/ � 44' 4-P-
(Complete Job Site Address)
Based upon that examination I have determined the installation was done according to the Hurricane
Miti ion Retrofit Manual (Based on 553.844 F.S)
Signature
State of Florida
County of Dade:
The undersigned, being the first duly sworn, deposes and says that he/she is the contractor for the above
property mentioned.
Sworn to and subscribed before me this FEB 0 8 2016 day of FEB 0 8 2016
I�L ��t f1�TAl�1f fid
Caseidt►LymYatRs
Notary Public, Sate of Florida at Large ATE OFRDRWA
. Coerce 5
EWM 11f6W9
*General, Building, Residential,or Roofing Contractors or any individual certified under 468 F.S.to make such an inspection.
Include photographs of each plane of the roof with permit#and address#clearly shown marked on the deck for each
inspection
�
ederal
Phone 954-784-2941
800-848-1919
8 TESTING INC. Fax 954-784-7875
250 SW 13th Ave Pompano Beach,FL 33M feed-eng.com
Dated: Wednesday, February 03,2016 Order Number 16-LAT-161
Latite Roofing&Sheet Metal,LLC
2280 West Copans Road
Pompano Beach, FL 33069
RE: TAS-106 Tile Uplift Test
Proposed Roof: 1032 NE 98th St. Holdings
Permit#: RF-1-15-47
1032 NE 98th Street
Miami Shores, FL 33138
In accordance with your authorization, Federal Engineering & Testing, Inc. has performed Tile Uplift Testing in
compliance with Testing Application Standards TAS-106 and the Florida Building Code High Velocity Hurricane Zone
on February 2, 2016 at the above referenced project. The purpose of our inspection was to determine the uplift
capacity of the roof tiles for the residence at the above referenced project.
The subject roof consisted of Double Roll Concrete Tile Foam.Set. The pitch of the subject roof is 3/12. Our field
engineer visited the site and conducted 85 uplift tests on the roof tiles. All tests were performed according to the
Florida Building Code High Velocity Hurricane Zone and protocol TAS-106 using an Intercomp Scale Model CS200.
The following is a summary of results:
Field Test Results
Test Number Test Location Feld U lift Pull Test Test Results
1 -18 Comer See Attached Diagram 35 t 5 Pounds Passed
19-54 Perimeter See Attached Diagram 35 t 5 Pounds Passed
55-72 Field See Attached Diagram 35 t 5 Pounds Passed
73-85 Hip/Ridge See Attached Diagram 35 t 5 Pounds Passed
All test results were found to be in compliance with TAS-906 and the Florida BuildiW Code
The test results are limited to the tested areas. If other roof areas exhibit different conditions, it should be brought to
our attention for remedial work. This uplift test is not a roof top inspection. A final roof inspection must be conducted
by the building official for approval. The test results presented reflect the condition of the roof system at the time of
the test. These results are time and sample dependent since roof conditions are continuously changing due to
exposure to the elements. Federal Engineering & Testing, Inc. is an independent third party providing un-biased
testing information and results and is not affiliated with our client nor do we have any financial interest in the project or
determination of the test results. As mutual protection to clients, the public and ourselves, all reports are submitted as
the confidential property of clients, and authorization for publication of statements, conclusions or extracts from or
regarding our reports is reserved pending our written approval.
We appreciate the opportunity to be of service to you at this phase of your project. If you have any questions or
comments, please give us a call. It has been a pleasure working with you and look forward to doing so again in the
near future.
Sincerely,
Keith LeBlanc, P.E. -4/1 ®B
Federal Engineering&Testing,Inc.
Florida Reg.No.59394
Certificate of Authorization#5471
Miami-Dade County Certification#11-0407.01
® MIAM4MMX
Construction Material American Concrete Miami Dade Florida Department
Engineering Council Institute County of Transportation
w
A
N
t
35
a 1' y 21 22 r
54-
29
36 31 bt 131 Iq
_ fit
,5q 31
. +54 4i? 18 4b
40 14 14 - X
m? 4}
41 8i
�1
6-4 (!:6 ,
42 tc
-1 Ana
2d
43 92�
44 t$ N 51�2
lit
a=0.1(w)= 0.1(61')=6.1'
a=0.4(h)= 0.4(16')=6.4'
Perimeter Dimensions=6.5'
Comer Area: 761 S.F. = 18 tests
Perimeter Area: 565 S.F. = 36 tests
Field Area: 2274 S.F. = 18 tests
Ridge Caps: 252 = 13 tests
Total Tests Performed. = 85 *All dimensions are approximate*
Test Location Sketch
Federal Engineering & Testing Inc. 250 SW 13th AVE Pompano Beach, FL 33069 (954) 784-2949
Client: Latite Roofing &Sheet Metal, LLC Project: 1032 NE 98th St. Holdings
Test: TAS-106 Tile Uplift Test Project Address: 1032 NE 98th Street
(Test location sketch is not to scale) Miami Shores, FL 33138
4
r �
`� EIVED
RSC
Miami Shores Village JA o15
Building Department B
10050 N.E.2nd Avenue,Miami Shores,Florida 33138
Tel:(305)795-2204 Fac(305)756-8972
INSPECTION UNE PHONE NUMBER:(30 5)7624949
FBC 201 0
BUILDING Muter Permit No. a/-" -7 " 1"i" IW 2`k
PERMIT APPLICATION sub Permit No. !n'"1 5-43
❑BUILDING ❑ELECTRIC (ROOFING ❑ REVISION ❑EXTENSION ❑RENEWAL
[:]PLUMBING 0 MECHANICAL ❑PUBLIC WORKS ❑CHANGE OF ❑CANCELLATION ❑SHOP
tt �/ l CONTRACTOR DRAWINGS
JOB ADDRESS: ! ®-3 a"- IVC m-
Cites Miami Shores County Miami Dade an: 3 I
Fob/ParceRl: ��-,320•x-®/8 - C9 3 a o Is the BWMMS tIMMMY Yes NO
Occupancy Type: Load: Construction Type: Hood Zone: BFE: FFE:
OWN�Njsmeee simples offer).l b �. Ce Pnot,e# y 9�/—0 0 9Y
Address;/�apo A
Qty�� •o(QuaLB--cQQQe State: �L . zip:X33 rf
Tenant/Lessee Name: Phone#:
Email:
L_ �
CONTRACTOR:Company Name: i ►�-.i:C A"� ���of �'7' fr I Phone#.q `--22—' :?q f-Ito
Address: 220C .W 2 c ckd
City 1 //1i State: �'L. Zip: S L;
Qualifier Name: CjQA U F jkQ T Phone#: �JrH'•�"l�'3y'i`�
State Certification or Registration M C_.0 C/ 12 6 J"10 Certificate of Competency#:
DESIGNER:Architect/Engineer: Phone#:
Address: Qty: State• Zip:
t: rr
Value of Work for this Pm 6D Oct .Square/LMear Footage of Woric 3•'YDt7 SIT-
Type of Work: [:1 Addition Alteration Ev New ❑ Repair/Replace ❑Demolition
D of Waic 4L- N
a a g
spedfy color of color thm We:
submittal Fee S fa) Pa nd Fee S • CIO CCF S CD/CC$
Scans ft Fee$ Radon Fee$ DBPR$ —NM"$
Technology Fee S Trairfng/Educatio:Fee$ Double Fee$
structural Reviews$ Bond$
TOTAL FEE NOW DUE
(RWMd0W,V 024)
Bonding Company's Name(if applicable)
Bonding Company's Address
City State Zip
Mortgage Lender's Name(if applicable)
Mortgage Lender's Address
Qty State Zip
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. i understand that a separate permit must be secured for ELECTRIC, PLUMBING, SIGNS, POOLS,
FURNACES,BOILERS,HEATERS,TANKS,AIR CONDITIONERS,ETC.....
OWNER'S AFFIDAVIT: I certify that all the foregoing Information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING
YOUR NOTICE OF COMMENCEMENT."
Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding$25W,the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subject to attachment. Also,a certified copy of the recorded notice of commencement must be posted at the job site
for the f ost inspection which occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the
inspection will not be approved and a reinspection fee will be charged.
Signature44V'Vl�� Signature ( �
OWNER or AGENT CONTRACTOR
Thef regoing instrument was acknowyledged before a this The foregoing instrument was acknowledged before me this
day of l� �— 20 by day of d y ( 6 r .20 > 'y .by
who is personally known to ', -V 1T .who is personally known to
me or who has produced as Me or who has produced as
Identification and who did take an oath. identification and who did take an oath.
NOTARY PUBLIC: NOTARY PUBLIC_
Sign: Sign`
Print: ��I.� lQ �lA uV Print:
IAC'Tmmm
Seal: Nalsey =Soft W..WW 4 t Seal: ;;�yo no4`NIL 01
of cow 6=4soz ;:n_1J0
ec$� ® cfl O•��
;0e
Ins—
all a`3� oat 77 s
srrsssrssssssrrrrsssasrrrsssss rrs• sssrrrrsrssrrrrrrsrrrsssssrsi��ss�ss�ssr��s �s�sssssssssssssswrsss
09 v SITZ �
APPROVED BY Plans Examiner �9•°•. S3l�Id .°' �O�� Zoning
Structural Review Clerk
(Rewbed02/24/2014)
STATE OF FLORIDA
DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION
CONSTRUCTION INDUSTRY LICENSING BOARD (850)4.87-1395
1940 NORTH MONROE STREET
TALLAHASSEE FL 32389-0783
SCOTT,CONN IE JEWELL
LATITE ROOFING AND SHEET METAL COMPANY
2704 OAK TREE DRIVE
OAKLAND PARK FL 33308
needy
one WWon I by the am of
BuMnew svW
_ R Our and STATE OF FLORIDA
ftmBUSINESSAND
Fk~9 - OFESSION&OF
Every�we work For�abouto w IM onto
txC9326610 1ED 071 2014
serve wwwjn~ds8censsAws. There you can*d mots kdmmdlon CERT EIED ROOFING CONTRACTOR
abs ow clivielcm and tris reVuladens#W hop"You.subscribe SCOTT,CON NIE JONSL
to newsletters am lown more about the Depdronents LATAE ROOFING AND SNW METAL COM
Our Inkslan at do DepartIne t Is:Umm Efficlerft,Regards,Fagg►.
we constantly strive to better 90 filet you can serve yols
cushnners. Thank youZ"doZ in F16", ie CERTIFIED under the provisions of Ch-469 F&
and congrakdallons on your nsw met Aft AU931 2M 1.1 os1M
DETACH HERE
RICK SCOTT.GOVERNOR KEN LAWSON,SECRETARY
STATE OF FLORA
DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION
CONSTRUCTION INDUSTRY LICENSING BOARD
The ROOFING CONTRACTOR
Named below IS CERTIFIED
Under the MwAsk m of Chapter 489 FS.
Expcatim date- AUG 31,2016
SCOTT,CONNIE JEWELL ,� w
LATITE ROOFING AND SHEET METAL COMPANY
2704 OAK TREE DRIVE
OAKLAND PARK FL 33309 1
MUM. 07114 DISPLAY AS REQUIRED BY LAW sEQ# L14073tK1WOR
BROWARD COUNTY LOCAL BUSINESS TAX RECEIPT
115&Andrews Ave.,Rm./-100. Ft Lwftrdgb,FL 33301-1896—9544331-QW
VAUD OCTOE3ER 1,2014 THROUGH SEPTENI ER 30,2015
DSA: itBusiness Hartle:LATITB ROOFTXQ & atm' mmRWIpt e:18 m6/2s�t �L CONTRACTOR
COMPANY 8ttsif Typri► txaosurca CORTBAC"POR?
OwnerNance;OOmiz imomLL aWShUM OMMi-.l0/30/2007
-01 LACa m:2280 N COPANS RD •CCC1326510
POMPANO BEACH ExwWtkm Com:
easiness Phone:954-772-3446
R 9ea/e sqpbysw ,
800
KmnbW or
Taz Amour
TrandW Fee MW Foe P6t'Yom ColeaOmr Cod Told Pffid
150.00
0.001. 0.001 0.00 0.00 0.00 150.00
THIS RECEIPT MUST BE POMD CONSPKWOUSLY IN YOUR PLACE OF WSWSS
THS BECOMES A TAX RECEIPT This to B WvW for om pWlW or doWq Wom wjM ftnmd Cour OW B
non-�y in row.You mud noel an County wKft Mery y P
WHEN VALIDATED OW Wft m**WfllWft TIft Buebwss Tax PAOW must be bwobffsd when
Rm busies B fid. bush= flalrra Im d Wd Or you betas mw4ed the
6u 0mm bmdm ThIB raoW does not Wcate that on buWnm is ftw or Md
8 B 8r cmqdbr=wBr Stets or bad taws and reguNow
Nalling Address:
Commis JRWRLL SCOTT 8eaeipt N11CP-13-00012554
2280 N COPANS RD paid 08/18/2014 150.00
POMPANO HFACK, FL 33069
2014 . 2015
---,MON LATIR00-01 NIBLAC to
AC4JRUe °ATE f
�,- CERTIFICATE OF LIABILITY INSURANCE 11201/2014
THIS CERTIFICATE 0 ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLD.THIS
CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES
BELOW. THIS CERTIFICATE OF IMBURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISIMING INSURER(S),AUTHORIZED
REPRESENTATIVE OR PRODUCER.AND THE CERTIFICATE HOLDER.
IMPORTANT: N the oeri fi ate hokler Is an ADDITIONAL INSURED,the )TraTst be endorsed. N SUBROGATION IS WAIVED,subject to
the term and mons of tate poley,certain policies may mire as endorsemenL A stelowunt an this cerillicale does not confer rights to the
cerWicule how In Hsu of such s
pitawim Brenda Mullis
humane Ofte of America,Inc- 4641516 (786)464-1517
1150 NW 72nd Avenue
suite 5w33126 AMMIM :Br� .M
auMs@Ioausa eom
Mhunk FL INUMMMARVIUMMANAGE um s
OMM A:First NWfqM Insurance Cornparry 10657
8:TInsurance Conipany 2NN
Latite Roofing and Sheat Metal,LLC a Lom c:First fted4ft Insurance Corporation 34816
2290 West Copens Road 8MLWMP:Guw=de&h aurance 11388
Pompano Beach,FL 33086 DIMMER E:Zurich American InsurmTce Company of 1llnoh: 27855
OURNMt
COVERAGES CERTIFICATE NUMBER: REVISION NUMBER:
THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD
INDICATED. NOTVPITHSTANDING ANY RMAREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHERDOCIMENTV fHRESPECTTOWHICHTHIS
CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS,
EXCLUSIONS AND CONDITIONS OF SUCH POLICIES.LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAW
ADM IN=
LTR ITM OF 900HANCE POLICY NUMBER AWN LMM
A X cowmmmm awmAL LIABILITY EKCH O $ 1,000100
CLA MS4AADE a OCCUR GL- 511860-01 OV61f201S 01101/ 168MQCMMv
wso,
IW EVOftomperun) $
PEPSOW.a Anv INJURY $ 11000,00
GWLAGGREMTE LWTAPPUFS PER GENSULAGOMATE $ 4000188
POLICY Q QCT ❑Loc ACTS-c A]PAGE $ $000,00
OTHM $
AUTONOWE LIABILITY M $ 9,000.00
B X ANYAUrp 5=777M 01101rMS 01M1P11116 OW&YINJURY(Perpmm) $
ALL
i AUT O"ID U WHEMM l30D1LYINJIIRY(Pwa $
HIREDAUTOS AUT06 $
UNORMAUM X OCCIBt MEA-oCCLNdvENCE $ 5,000100
C X UA6 I CLAW-MADE rMOMM 0210102014 0210702015 ANTE $ 51000100
DID RMOMONS $
wcrATb�t X
AMEMOVEWD ANYPROPi$ HER LlA8YIN PIOBS135026IC Olffili 15 01101WO A R
!fir M ON occLt3u? ®u/A E L EACH ACCmEM $ 1,000,00
E.L D WEASE-EA EMPLOYE14$ 1,00.0001
e aeselme WWO&SWONS below EL 128ME-POUCY L M $ 1,000.00
E r Lleb-20d Layer OX011=4 02M1t2015 Occurm r a 2,000,00
DESCROrMN OF OPERATE 1 LOCATIM I VEMCLES(ACORD 101,AddWanel Renoft S mW be a it mwe spree to requkeQ
Quallftes License Na OCC1326510
Village of Viand Shores Is additional htstsed as respects to general Iatliny as required underwritten conhacL NOC:30DaysR0Days N*n4 aynent of
premitan In accordance with the po ft proves.
CERTIFICATE HOLDER CANCELLATION
SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE
THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN
ACCORDANCE WITH THE POLICY PROVISIONS.
C AUTIIOIa p
REPROSIMATIVE
tl
Village ofShores Bldg.Det.
10050 N 2ndnd AvAv e
NINan!Shores.FL 33138
01988-2014 ACORD CORPORATION. AN rWft rte.
arrxtn 4%%r%ajsal+t Tho Ar•.nwn mmna and a...ft sea rannataraet,..arks..f aCnon
i
P No. RF4-15-47
Miami Shores Village Pem*Type:Roof
10050 N.E.2nd Avenue NE Work C/eSsiCadOn-Tile
Miami Shores,FL 33138-0000
Perm/t Status:APPROVED
Phone: (305)795-2204
g q qg. Expiration: 03119/2016
Project Address Parcel Number Applicant
1032 NE 91 Street 1132050180320 1032 NE 98TH HOLDINGS LLC
Miami Sho es, FL 33138- Block: Lot:
Owner Informatloi i Address Phone Cell
Phone..:... .w: .m.,,..
i.
6
1032 NE 98TH HOLDINGS LLC 800 CORPORATE Drive
«._
FT.LAUDERDALE FL 33334-
�<
800 CORPORATE Drive
FT.LAUDERDALE FL 33334-
Contractor(s) Phone Cell Phone ,
LATITE ROOF] G&SHEET METAL CI 954772-3446 Valuation: $ 23,350.00
_. . . ............ Total Sq Feet: 3400
Type of Work:Re I Zoof Available Inspections:
Additional Info:RE ROOF NEW TILE ROOF Inspection Type:
Classification:Res dential Up Lift Report
Scanning:3
Tin Cap
Final Roof
Tile In Progress
Renailing Affidavit
Review Roof
Cap Sheet
Fees Due Amount Pay Date Pay Type Amt Paid Amt Due
—
CCF $ta.a0
DBPR Fee Invoice# RF-1-15-54103
$a.88 01/09/2015 Credit Card $50.00 $332.16
DCA Fee $4.88
Education Surcharge $4,80 09/21/2015 Check M 2749 $332.16 $0.00
Permit Fee-New R f $325.00
Scanning Fee $9.00
Technology Fee $19.20
Total: $382.16
In consideration of he issuance to me of this permit, I agree to perform the work covered hereunder in compliance with all ordinances and regulations
pertaining thereto ar d in strict conformity with the plans,drawings,statements or specifications submitted to the proper authorities of Miami Shores Village. In
accepting this permi I assume responsibility for all work done by either myself, my agent, servants, or employes. I understand that separate permits are
required for ELECTF ICAL,PLUMBING,MECHANICAL,WINDOWS,DOORS,ROOFING and SWIMMING POOL work.
OWNERS AFFIDAV T: I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws regulating
construction and zon ing. Futhermore,I authorize the above-named contractor t o e d.
September 21, 2015
Authorizer Signature:Owner / Applicant / Contractor / gent Date
Building Department Copy
September 21,2 015 1
From: ,A�
01/11/2016 73:33 #066 P.002/002
�( (q t6?
LATIROO-01 NIBLACKD
CERTIFICATE OF LIABILITY INSURANCE °AT1
1/1111/2020'YYYY'
16
THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER.THIS
CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES
BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S),AUTHORIZED
REPRESENTATIVE OR PRODUCER,AND THE CERTIFICATE HOLDER.
IMPORTANT: If the certificate holder is an ADDITIONAL INSURED,the pollcy(tes)must be endorsed. If SUBROGATION IS WAIVED,subject to
the terms and conditions of the policy,certain policies may require an endorsement. A statement on this certificate does not confer rights to the
certificate holder In ileu of such endorsemen s.
PRODUCER CONTACTBrenda Mullis
Insurance Office of America,Inc. NAME:
1150 NW 72nd Avenue :(786 464-1616 .(786 464151?
Suite 530 E-MAIL
Miami,.FL 33126 ss•Bronda.Mullis@Joausa.com
F
INSURERS)AFFORDING COVERAGE MAIC A
INSURER A:First MercuryInsurance Company 10657
INSUREDLNsuRERa:Transportation Insurance Company 20494
Lathe Roofing and Sheet Metal,LLC INSURER C C.First Speclatty Insurance Corporation 3491$
2280 West Copans Road INSURER a:Guarantee Insurance Company 11398
Pompano Beach,FL 33068 INSURER E•
INSURER F
COVERAGES CERTIFICATE NUMBER: REVISION NUMBER:
THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PER10D
INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACTOR OTHER DOCUMENT WITH RESPECT TO WHICH THIS
CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS,
IN EXCLUSIONS AND CONDITIONS OF SUCH POLICIES.LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS.
TYPE OF INSURANCE ADOUSUOR
POLICY NUMBER LIMITS
A X COMMERCIAL GENERAL.LIABILITY EACH OCCURRENCE $ 1,000,00
CLAIMS4AADE a OCCUR MI-CGL-000005068"2 01/01/2016 01/0112017 sIV KrMTEO g 50,00
MED EXP(Any one peraw) $ 5,00
PERSONAL&ADV INJURY $ 1,000,00
GENT.AGGREGATE LIMIT APPLIES PER GENERAL AGGREGATE $ 2,000,00
POLICY D WT F�LOC PRODUCTS-COUP/013 AGG $ 2,000,00
OTHER $
AUTOMOBILE LIABILITY s«�aenl LI $ 1.000,00
B X ANY AUTO 5090777785 01/0112016 01/01/2017 BODILY INJURY(Per person) $
ALL OWNED SCHEDULED
AUTOS AUTOS BODILY INJURY(Fen accident) $
HIRED AUTOSAUTOS Fer $
X
UMBRELLA X OCCUR $
C EXCESS LIAS CLAIMS-MADE IRF-200046301 EACH OCCURRENCE $ 5,000,00
02/01/2015 02!01/2016 AGGREGATE $ 51000,00
DEC) I X i RETENTION 0
TVORKERS COMPENSATION
AND EMPLOYERV LIABILITYX P ATUTE ER
D DOFF ICREROMAPEEMSFREEXXCLUTNDEp?XECU7IVE Y®NIA CP101098503GIC 01101/2016 01/01!2017 E.LEACHACCIDENT $ 1,000,00
ndatory In NH)
ti� desa}beu E.LDISEASE-EAE.MPLOY $ 1,000,00
DESCRI OF OPERATIONS below E.L DISEASE-POLICY LIMIT S 11000100
DESCRIPTION OF OPERATIONS I LOCATIONS I VEHICLES(ACORD 1 G1,Additional Remarks Schedule,may be attached If mwe space is required)
Qualiflees License No.CCC1326510
Village of Miami Shores is additional Insured as respects to general liability as required under written contract. NOC:30Days/1 ODaya Non-Payment of
premium In accordance with the policy provisions.
CERTIFICATE HOLDER CANCELLATION
SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE
THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN
ACCORDANCE WITH THE POLICY PROVISIONS.
VillagAUTHORIZED REPRESENTATIVE
Imlai 0050 N 2nd Ave
mi S FL
10050 of Miami Shores Bldg.Dept.33138
01OW2014 ACORD CORPORATION. All rights reserved.
ACORD 25(2014101) The ACORD name and logo are registered marks of ACORD
From: 01/11/2016 13:33 0066 P.001/002
T%
MOW.Cons Road•Pconc Bud%Florida 33069•(954)772.3446
4
Mein Nw. tildes Fax: survIo Fano Profto"aa Faaa:
{toS4199s-5o0b (95a)93&9t58 (t�TttY5872 (K4)77,T8�1Y
To: To Whom It May Concern From: Cindy-Lathe Roofing
Fax: 954-938-9151 Pages: 2
Phone: 954-772-3446 Ext# 325 or 330 Date: 1/11/2016
Re: Updated COI -Lic#CCC1326510 CC:
Please see the attached updated Certificate of Insurance. If you have any questions
please let me know and thanks in advance for your assistance!!!
Cindy Chandler
Latite Roofing and Sheet Metal
2280 W. Copans Road
Poinpano Beach,FL 33069
Office—(954)772-3446 Ext.#325
Fax—(954)938-9158
Peisonal Cell—(863)449-0242
• ... ��-. .fir .. . - � �� 7 � b
. . _ • • ..•r G atr I.r /p F
I •li
r
R r r
. r r
■■■■■■■■■■■■■■�■■■■■■ �Ir` t
i . •I r :+ i r�i c I•• r � ri i
I
2 ALTEP AMON
_ &RW40MNG AOS:
— BKACKErra11UlROWV
I quo I�+>E�sttt�r
nEADpac FOM A9AMA11,3�38
— --------
1i I 0
BAIH
Q�t�
mw wit NOJ
am
1
i 0� ��
°
cd
14—
......
---_----
►�wq.PWOM J ""�°.�°°°°°��
i�00��O1M1R� R
.. • �l�aalmm.le d�ilhn
s ii7i�B010@IOgR@
-- b.I'
'1ST
` 14 214
Proposed 2nd Floor Plan 1/4" Sc. Al
�F
4
c � �
s �{
n3� �
}
v mk a
tt
7 J
ROOF.ASSEMSLn8 AND ROOFTOP STRUCTURES
: Florida Building 1lde Edition 2010
ttlgAWDdly Hwrlmw Zone Uii arm PWMKAppftaftn Form.
Section D( S hed Rif SyMM)
" Roof System Manufacturer:
ENTEGRA ROOF TILE , INC.
Notice of Acceptance Number: 11.0414.08
Aftlan Wind Pressures,If A0pilicabie(From RAS 127 or
eiculations : ■ -39.1
p2:.-68,.!.. P3; -100.7
INSTALL TILE WITH POLYFOAM-
Simp Sloped RoofAftm Description
•
° : PLYWOOD
• Type Undedwrient
Roof Sloes: � .
_ 12
Insulation:' =N1
' Fire Barrier.
NIAi
■
•
pbgs.Ve n? FaderwVb&Spacing:NIA T IN . CAPS & NAILS 6 1�
IN FIELD
AType:
• 'tysie Cap Sfieet: I POLYGLASS/POLYSTICK JU A 1AX
---------------Mean Roof Haight 14' ROOF Covering: " n
. ENTEGRA BELLA HIGHTILE
-Type&sto
" 26 GA.
p Edge:
c GALVANIZED
e
•
M
i
s
R
2010 FLORIDA BUILW=CODE--W tbM
ROOF ASSEMBUES AND ROOFTOP STRUOTURES
Florida Building Cod®Edition 2010
Ngh-V400Y HWrkane IOM Unit n NM*App Foy.
Section E(Til®Cal6katiow)
ForMameot6aeea�esy+Re�,e3ogreaB�Ma�Od!erg.O�mmme� ,rkht6ev�eesSa�M�.umeu�.+�ms,ue�►affimso�
aged m tbol�amw.Fateaahaa,a�'d,eteaK,tLene�et6eatta�me�bodia soogAatfla. :
Me@wd 1'7ldgeowtBaeedlGeParBA8127" ; '
(P,:-39.1 xk.378,14.77)-mv6.80 w7 7 , An„dm, 66.5 ;
(p2-68.1 x0.378 Z5-74) 6880 18.94
100.7x 0.378„38.00)_MW6.80 aN,,31.26 p ArpwWmr 66.5
Memed2 ,a� ra�,�asaao�r :
N�adMa��'Resielama(E�Fiomlt+laeEaow PaodootA�a+omdA+if
Mr f#tdmd Moment ROW$t~ '
man Roof H*m-+
Roeds1w j 16' 2m 26' 80' 41r
2:12 84 4 2LB 88.2 Sea 42.2
3:12 822 34.t 88.6 37A '
4112 36.4 32.2 83.8 S6.1 372-
542 264 30.i 82.8 34s
8:12 2m au 20A 80.6 32a
7:12 MA 26.8 -27.1 28.2 .3.e •.
*Mae bearaala=42od uremaNstcfmomMWwdj eaysOmmmdowd tlie'- M.W R..d atFftwdAw b
R
F-Uffl tb-ddh-3 1 a—MGftd3.t2Wed9ft* =fwFvd&tlw FVdwrvmhmmpedwdumoreqvdtoomivatem :
fareftch a ofdmw4d=dw8lsa M0dI0dbaoa
Me1Led8 Baoed7fle PWRASnr :
xL '4 ■'1= Xa:■<_�-1w xam8 m�+ig PaodaotAplaevalP' ■
XL a xv.= I-W. x am9 sW Phdo tAppmdr :
s
�g XX. xva=_�-qw X omti ■. PmdodAnwvalF
to
BMW -VnMM to find
R
R
:-
DeatgvPaeemxe PlerP2orP3 RASmTotof ima d69mASM-1
bimaodmewd $
■
Raftft
Roa(Sbope B 7o68Ye ;
•
- x PavdadtApFov�... •
Mommtdwto •
P,ofieotApPmvhC .. �
. Ammlmr�Reelatmoe Mf P,odaetApptaa�(.
MR coked
MW�AmaLmmtRea�e000 P P,odootAnva"l..
RalobedUp68Reanda000 Fr t]aioelmed '.
■
Av=p 7HmWd& W PaodMAppaval..
AIleelmbmtmamvet4osabmt adtodr,lWMlogefflMatftLSmeorpmac>ppi o i
•
r
=0 FLORUM BUILDING CODE—BU LDM lax
MIAMI-DADS COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES mm) 11805 SW 26 Stns,[loon 208
BOARD AND CODE ADMiNinUATION DIVISION Miami.Flail 33173-2474
T(780 315 2590 F(785)315-2399
NOTICE OF ACCEPTANCE(NOA) www.mi9midade.gOV/e4onom
Polyglass USA Inc.
150 Lyon Drive
Fernley,NV 89408
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials.The
documentation submitted has been reviewed and accepted by Miami lade County RER-Product Control Section to be
used in Miami Dade County and other areas when allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stag below.The Miami-Dade County Product Control Section
(In Miami Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve the right to have this
product or material tested for quality assurance purposes.If this product or material fails to perform in the accepted
manner,the manufacturer will incur the expense of such testing and the AHJ may immediately revoke,modify,or
suspend the use of such product or material within theirjurisdiction. RER reserves the right to revoke this acceptance,
If it is determined by Miami Dade County Product Control Section that this product or material fails to meet the
requirements of the applicable building code.
This product is approved as described herein,and has been desip W to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION:Poiyglass Polystick Underlayments
LABELING:Each unit shall bear a permanent label with the manufacturets name or logo,city,state and following
statement:"Miami Dade County Product Control Approved",unless otherwise noted herein.
RENEWAL of this NOA shall be considered alter a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials,use,and/or manufactm of the product or process.Misuse of this NOA as an endorsement of any produuct,
for sales,advertising or any other purposes shall automatically terminate this MA.Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami Dade County,Florida, and followed
by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then
it shall be done in its entirety.
INSPECTION:A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This revises NOA#11-1229.01 and consists of pages 1 through 8.
The submitted documentation was reviewed by Alex Tigers.
11T0A ATo.: 12.4713.02
Expiration Date: 09/13/16
Approval Date: 02/14/13
Page 1 of 8
ROOFING COMPONENT APPROVAL
Catezorw Roofing
Sub-Cateeorv: Underlayment
Material: SBS,APP Self Adbermg Modified Bitumen
PRODUCTS DESCRIPTION:
Test Product
Product Dimensions Specification Description
Polystick MTS Roll: TAS 103 A homogeneous,rubberized asphalt
u ndcrlayment 65'8"x 3'3'/$" waterproofing membrane,glass fiber reinforced
Main factoring Location 60 mils thick with polyolefnic film on the upper surface for
42 use as an underlayment for metal roofing,roof
tile,slate tiles and shingle underkyment.
Polystick IR Xe Roll: TAS 103 and A fine gramular/sand top surface self-adhering,
underlayment 65'x 3'3 3/8" ASTM D 1970 APP polymer modified,fiberglass reinforced,
Mwwfactra-ing Location Or 65'x 3' bituminous sheet material for use as an
#1 60 mils thick underlayment in sloped roof assemblies.
Designed as an ice&rain shield and as a flat
roof file underlayment.
Polystick TU Roll: TAS 103 and A heavy granuled surface self adhering,APP
underlayment 32'10"x 3'3 3/s" ASTM D 1970 polymer modified,fiberglass or polyester
Manrsfactwing Location 100 mils thick reinforced,bituminous sheet material for use as
#1 an underlayment in sloped roof assemblies.
Designed as a a roof file underlayment.
Polystick TU Plus Roll: TAS 103 and A rubberized asphalt self-adherin&glass-
underlayment 65'x 3'3'/8" ASTM D 1970 fiber/polyester reinforced waterproofing
(Surface Printing) 80 mils thick membrane.Designed as a metal roofing and roof
Main factw ing Location file underlayment.
#1
Polystick TU P Roll: TAS 103 and A rubberized asphalt waterproofing membrane,
underlsyment 32'l 0"x 3'3 3/s" ASTM D 1970 glass-fiber/polyester reinforced,with a granular
AAwnifacturing Location 130 mils thick surface designed for use as a the roof
#2 underlayment.
Polystick Tile Pro Roll: TAS 103 and A rubberized asphalt self-adhering,glass-
Manra/acturing Location 6 P x 3'3'/s" ASTM D 1970 fiber/polyester reinforced waterproofing
#2 60 mils thick membrane.Designed as a metal roofing and roof
file underlayment.
Polystick Dual Pro Roll: TAS 103 and A rubberized asphalt self-adhering,glass-
Mamtfiactwing Location 61'x 3'3 3/s" ASTM D 1970 fiber/polyester reinforced waterproofing
#2 60 mils thick membrane. Designed as a metal roofing and
roof file underlayment.
NOA No.: 12-0713.02
Expiration Date: 89/13/16
Approval Date: 02/14/13
Page 2 of 8
PRODUCTS DEscmmoN:
Test Product
Product Dimensions Snecitleaugg Des¢rintion
Polystick TU Max Roll: TAS 103 and A rubberized asphalt self-adhering,polyester
Mmn factwIng Locadon 65'8"x3'3-3/8" ASTM D 1970 reinforced waterproofing membrane. Designed
#2 60 mils thick as a a roof tile vnderlayment.
MANUFACTURING PLANTS:
1.Hazelton,PA
2.Winter Haven,FL
EVIDENCE SuBNIITTED:
Tat Aeencv Test I entifier Test Name/Reuortate
Exterior Research&Design,LLC 11756.04.01-1 TAS 103 04/27/01
11756.08.01-1 ASTM D 1970 08/14/01
02202.08.05 TAS 103 08/29/05
Trinity MD PS 110.08.07 TAS 103 08!29/07
P10870.09.08-RI TAS 103 12/04/08
P10870.04.09 TAS 103/ASTM D4798&0155 04/13/09
P33360.06.10 ASTM D1970 07/01/10
P33370.03.11 TAS 103 03/02/11
P33370.04.11 ASTM D 1623 04/26/11
P36900.09.11 TAS 103/ASTM D4798&0155 09/01/11
P37300.10.11 TAS 110/ASTM D4798&D1970 10/19/11
P40390.08.12-1 TAS 103&TAS 110 08/06/12
P40390.08.12-2 ASTM D 1623 08/07/12
P40390.10.12 ASTM D 1970 10/03/12
PRI Asphalt Technologies PRI01111 ASTM D 4977 04/08/02
PUSA-005-02-01 ASTM D 4977 01/31/02
PUSA-018-02-01 ASTM D 2523 07/14/03
PUSA-035-02-01 TAS 103 09/29/06
PUSA-033-02-01 ASTM D 1970 01/12/06
PUSA-055-02-02 TAS 103 12/10/07
PUSA-083-02-01 TAS 103 06/30/08
PUSA-089-02-01 TAS 103/ASTM D4798&0155 07/06/09
Momentum Technologies,Inc. 3X20H7A TAS 103/ASTM D4798&0155 04/01/08
RX14EBA TAS 103/ASTM D4798&G155 11/09/09
DX23D8B TAS 103/ASTM D4799&0155 02/18iI0
DX23D8A TAS 103/ASTM D4798&G155 02/18/10
NOA No.: 12-0713.02
Expiration Date: 09/13/16
Approval Date: 02/14/13
Page 3 of 8
INSTALLATION PROCEDURES:
Deck Type 1: Wood,non-insulated
Base Sheet: One or more plies of ASTM D 226 Type II or ASTM D 2626.
Fastenfmg. Per FBC 1318.2&1518A Nails and tin caps 12"grid,6"o.c.at a minimum 4"head lap.(for
base sheet only)
Membrane: Polystick membranes self-adhered.
Surfaeing: None
1. All nails in the deck shall be carefully checked for protruding heads. Re-fasten any loose decking panels,
and sweep the deck thoroughly to remove any dust and debris prior to application.
2. Place the underlay hent over metal drip edge in accordance with RAS 111.
3. Place the first course of membrane parallel to the eave,rolling the membrane to obtain maximum contact.
Remove the release film as the membrane is applied. . All side laps shall be a minimum of 3-%s"and end
IW shall be a minimum of 6." Roll the membrane into place after removing the release strip. Vertical
strapping of the roof with Polystick is acceptable. Membrane shall be back nailed in accordance with
applicable building code.
4. When applying the membrane in the valley,start at the low point and work to the high point,rolling the
membrane from the center outward in both directions.
5. For ridge applications,center the membrane and roll from the center outward in both directions.
6. Roll or broom the entire membrane surface so as to have full contact with the surface,giving special
attention to lap areas.
7. Flash vent pipes,stacks,chimneys and penetrations in compliance with Roof Assembly current Product
Control Notice of Acceptance.
& All protrusions or drains shall be initially taped with a 6"piece of underlayment. The flashing tape shall he
pressed in place and formed around the protrusion to ensure a tight fit. A second layer of Polystick shall be
applied over the underlayment.
NOA No.: 12-1713.02
Expiration Date: 04/13/16
Approval Date: 0V14113
Page 4 of 8
GENzRAL LIMITATIONS:
L Fire classification is not part of this acceptance.
2. Polystick ARTS,TU Plus,Tile Pro and Dual Pro may be used in asphaltic shingles,wood shakes and shingles,
non-structural metal roofing,roof tile systems and quarry slate roof assemblies.Polystick IR-Xe,TU,and TU
P may be used in all the previous assemblies listed except metal roofing. Polystick TU Max may be used in
roof tile systems only.
3. Deck requirements shall be in compliance with applicable building code.
4. Polyglass Polystick membranes shall be applied to a smooth,clean and dry surface. The deck shall be free of
irregularities.
S. Polyglass Polystick membranes and underlayments shall not be adhered directly over a preexisting roof
membrane as a recover system.
L Polyglass Polystick membranes shall not be left exposed as a temporary roof for longer than the amount of
days listed in the table below after application. Polyglass reserves the right to revise or alter product
exposure times;not to exceed the preceeding maximum time limitations.
Exponre Umitatfons
MTS Ut Xe TU IU Plus TU P T&Pro Dual Pro TU Ku
%%Or Hav FI.. 180 ISO 180 180 no ISO 180 90
Hazeft PA. NIA 30 30 180 N/A N/A N/A NIA
7. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code
and Rule 9N-3 of the Florida Administrative Code.
S. In roof ts'le application,data for the attachment resistance of roof tiles shall be as set forth in the roof tile
mar of tchuer's Notice of Acceptance.Polystick TU,TU Plus,Tile Pro and TU Max may be used in both
adhesive set and mechanically fastened roof file applications.Polystick IR-Xe,and Dual Pro are limited to
mechanically fastened roof file applications.Polystick MTS is limited to mechanically fastened with battens
roof tile applications.Polystick TU P may be used in both adhesive set and mechanically fastened roof the
applications with the exception of mortar set the applications.
9. The maximum roof slope for use as roof file underlayment for(direct4o dock)tile assemblies shall be as
follows:(See Table Below)
Tile Prome Po""MTS Polystiek Eli Xe Polysdck TU,TU Polystick TU
Plus,TU P,TIle Max
Pro
Flat Tile Prohibited without 5:12 No limitation No limitation
battens
Profiled Tile Proln'bited without Prohibited No limitation No limitation
battens
The above slope limitations can be exc xW only by using battens and counter battens m accordance with the
Approved Tile System Notice of Acceptance and applicable Florida Building Cock requirements. Baum
are required for both loading and installation of tiles at all times.
NOA No.: 12-0713.02
Fapiradon Date: 09/13/16
Approval Date: 02/14/13
Page 5 of 8
GENERAL Ln unom:(CONTINUED)
10. Care should be taken during the loading procedure to keep foot traffic to a minimum and to avoid dropping of
file directly on the underlayment.Refer to Polyglass'Tile loading detail below for loading procedure for all
underlayments except Polystick MTS which shall be loaded onto battens.
Roofing 711es
(6 Max Per stack)
1212'
• k '
s
N
r
m
RDOTL�e6tc prepared vdlh
FOLYSIICK7U'PIu9
11. Refer to prepared roofing system Product Control Notice of Acceptance for listed approval of this product
with specific prepared roofing products.Polystick MTS,JR-Xe,TU,TU Plus,TU P,TU Max,Dual Pro and
Tile Pro may be used with any approved roof covering Notice of Acceptance listing Polystick MTS,IR-Xe,
TU,TU Plus,TU P,TU Max,Dual Pro aid Tile Pro as a component part of an assembly in the Notice of
Acceptance. If Polystick MTS,IR-Xe,TU,TU Plus,TU P,TU Max,Dual Pro and Tile Pro is not listed,a
request may be made to the Authority Having Jurisdiction(AHJ)or the Miami Dade County Product Control
Department for approval provided that appropriate documentation is provided to detail compatibility of the
products,wind uplift resistance,and fire testing results.
LABELING:
L All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or logo,
city and state of manufacturing facility and the following statement: "Miami--Dade County Product Control
Approved"or the Miami-Dade County Product Control Seal as shown below.
�s
BUILDING PERMIT REQUIREMENTS:
Application for building permit shall be accompanied by copies of the following:
1.This Notice of Acceptance.
2.Any other documents required by the Building official or applicable building code in order to properly evaluate
the installation of this materials.
NOA No.: 12-0713.02
Exphvftn bate: 09/13/16
Approval Date: 0W4/13
Page 6 of 8
POLYGLASS GENERAL APPLICATION GUIDELINES FOR POLY5TICK MEmzPtA'1TES:
L Polyglass does accept the direct application of Polystick underlayment membranes to wood decks. Installers
are cautioned to refer to applicable local building codes prior to direct deck installation to ensure this is
acceptable. Please also refer to applicable Product Data Sheets of the correspondingproducts.
2. All rolls,with-the exception of Polystick TU Plus should be back-railed in selvage edge seam as per Polyglass
Back;Nailing Guide. Nails shall be,11 gauge ring shank type,applied with a minimum I"metal disk as
required in Dade County or simplex type nail as otherwise allowable in other regions,at a minimum rate of
12"o.c. Polystick TU Plus should be back nailed in designated area marked"nail area,area para claval"on
the face of membrane,with the above stated nails and/or disks.The head lap membrane is to cover the area
being back-nailed.(Please refer to applicable local building codes prior to installation.)
3. All seal lap seams(selvage laps)must be rolled with a hand roller to ensure full contact.
4. All fabric over fabric;and granule over granule end laps,shall have a 6"wide,uniform layer of Polyglass
Polyplus 55 Premium Modified Flashing Cement,Polyglass Polyplus 50 Premium MB Flashing Cement,
Polyglass P0500 MB Flashing Cement,applied in between the application of the lap.The use of mastic
between the laps does not apply to Polystick MTS.
S. A maximum of 6 tiles per stack are allowed when loading the on the underlayments.Refer to the Polyglass
Tile Loading Guidelines.See General Limitations#9 and 010.
6. Battens and/or Counter-battens,as required by the tale manufacturers NOA's,must be used on all projects for
pitch/slopes of 7"/12"or greater. It is suggested that on pitch/slopes in excess of 6'/a"/12",precautions
should be taken,such as the use of battens to prevent file sliding during the loading process.
7. Minimum cure time after membrane installation&before loading of roofing tiles is Forty-Eight(48)Hours.
& Polystick membranes may not be used in any exposed application such as crickets,exposed valleys,or
exposed roof to wall details.
9. Repair of Polystick membranes is to be accomplished by applying Polyglass Polyplus 55 Premium Modified
Flashing Cement,Polyglass Polyplus 50 Premium MB Flashing Cement,Polyglass PG500 MB Flashing
Cement to the area in need of repair,followed by a patch of the Polystick material of like kind should be set
and hand rolled in place over the area needing such repair.Patching membrane shall be a minimum of 6
inches in either direction. The repair should be installed in such a way so that water will run parallel to or
over the top of all laps of the patch.
10. All self-adhered membranes must be rolled to ensure full contact with approved substrates. Polyglass
requires a minimum of 40 Is for a weighted roller for the rolling of the field membrane. Hand rollers are
acceptable for rolling of patches or small areas of the roof. Brooming may be used where slope prohibits
rolling.
11. All approved substrates should be dry,clean and properly prepared,before any application of Polystick
membranes commences. An approved substrate technical bulletin can be furnished upon request.It is
recommended to refer to applicable building codes prior to installation to verify acceptable substrates.
12. The Polyglass Miami-Dade Notice of Acceptance(NOA)approval for Polystick membranes and
PolyProtector UDL can be furnished upon request by our Technical Services Department by calling 1 (800)
894-4563.
NOA No.: 12-0713.02
Expiration Date: 09/13/16
Approval Date: 02/14/13
Page 7 of 8
13. Questions in regards to the application of Polyglass products should be directed to our Technical Services
Department at 1 (800)894-4563.
14. Polyglass recommends that applicators follow good roofing practices and applicable procedures as outlined
by the National Roofing Contractors Association(NBCA).
PLEASE CHECK WITH LOCAL BUILDLNG CODES REGARDING LIMITATIONS OF SPECIFIC
APPLICATIONS. LOCAL CODES MAY SUPERSEDE POLYGLASS REQUIItEMENTS AND
RECOMMENDATIONS.
END OF THIS ACCEPTANCE
NOA Na: 12-0713A2
Expiration Date: 09/13110
Approval Date: 02/14/13
Page 8 of 8
1VIIA11-DADS COUNTY
i
IAM PRODUCT CONTROL SECTIONM 11805 SW 26 Street,Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES MER) Miami,Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T(786)315-2590 F(786)315-2599
NOTICE OF ACCEPTANCE OA www.miamidade.eov/ecoaomv
3M Company
3M Center Building 0220415-F,%
%
St Paul,MN.55144-1000
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami Dade County RER-Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below.The Miami-Dade County Product Control Section
(In Miami Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve tate right to have this product
or material tested for duality assurance purposes.If this product or material fails to perform in the accepted manner,the
manufacturer will incur the expense of such testing and the AHI may immediately revoke,modify,or suspend the use
of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is
determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements
of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
IDESCRIPTION:3MTN 2-Component Foam Roof Tile Adhesive AH-160
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement:"Miami Dade County Product Control Approved",unless otherwise noted herein.
RENEWAL of this NOA shall be considered aft a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TE»PAUNATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials,use,and/or manuf teture of the product or process.Misuse of this NOA as an endorsement of any product,for
sales,advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
ADVERT1SZbUNT: The NOA number preceded by the words Miami Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then it shall be dome
in its entirely.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revisers NOA 12-0228.18 and consists of pages 1 through 11.
The submitted documentation was reviewed by Juan E.Collao,R.A.
NOA No.:134M.02
Expiration Date.05/10/17
Approval Date:12112/13
Page I of 11
•
ROOFING COMPONENT APPROVAL:
Category: Roofing
Sub Category: Roof tile adhesive
Materials: Polyurethane
SCOPE:
This approves 3,Wm 2-Component Foam hoof Tile Adhesive AH-160 as manufactured by 3M Company as
described in Section 2 of this Notice of Acceptance.For the Iocations where the design pressure requirements,as
determined by applicable building code,does not exceed the design pressure values obtained by calculations in
compliance with Roofing Application Standard RAS 127,for use with approved flat,low,and high profile roof tiles
system using 2-Component Foam Roof Tile Adhesive AH-1 60.Where the attachment calculations are done as a
moment based system for single patty placement,and as an uplift based system for double patty systems
PRODUCTS MANUFACTURED BY APPLICANT:
Dimensions Test Product Description
1gl0cations
3M. TM 2-Component Foam N/A TAS 101 Two component polyurethane foam adhesive
Roof Tile Adhesive AH-
160
H160
Foam Dispenser RTF1000 N/A Dispensing Equipment
ProPack®30& 100 NIA Dispensing Equipment
PRODUCTS MANUFACTURED BY OTHERS:
Any Miami-Dade County Product Control Accepted Roof Tile Assembly having a current NOA which list moment
resistance values with the use of 2-Component Foam Roof Tile Adhesive AH-160 roof tile adhesive.
NIANUFACTURING LOCATION:
1. Tomball,TX.
PHYSICAL PROPERTIES:
Test Res
Density ASTM D 1622 1.6 lbsJft.3
Compressive Strength ASTM D 1621 18 PSI Parallel to rise
12 PSI Perpendicular to rise
Tensile Strength ASTM D 1623 28 PSI Parallel to rise
Water Absorption ASTM D 2127 0.08 LbsJFf
Moisture Vapor Transmission ASTM E 96 3.1 Perm/Inch
Dimensional Stability ASTM D 2126 +0.07%Volume Change @-40°F.,2 weeks
+6.0%Volume Change @158°F., 100%Humidity,2
weeks
Closed Cell Content ASTM D 2856 860/0
Note: The physical properties listed above are presented as typical average values as determined by
accepted ASTM test methods and are subject to normal manufacturtag variation.
NOA No.:13-8502.02
Expiration Date:05/10/17
Approval Date: 12/12/13
Page 2 of 11
EvIDwm SuBMI'I' m
Test nee► Test Identifier Test Name/Renort D,�g
Center for Applied Engineering #94-060 TAS 101 04/08/94
257818-IPA TAS 101 12/16196
25-7438-3 SSTD 11-93 10/25/95
25-7438-4
25-7438-7 SSTD 11-93 11/02/95
25-7492 SSTD 11-93 12/12/95
Miles Laboratories NB-589-631 ASTM D 1623 02/01/94
Polymers Division
Ramtech Laboratories,Inc. 9637-92 ASTM E 108 04/30/93
Southwest Research Institute 01-6743-011 ASTM E 108 11/16/94
01-6739-062b[l] ASTM E 84 01/16/95
Trinity Engineering 7050.02.96-1 TAS 114 03/14/96
P36700.04.12 ASTM D 1623 04/18112
P39740.02.12 TAS 101 02/21/12
TAS 123
Celotex Corp.Testing Services 528454-2-1 TAS 101 10/23/98
528454-9-1
528454-10-1
520109-1 TAS 101 12/28/98
520109-2
520109-3
520109-6
520109-7
520191-1 TAS 101 03/02/99
520109-2-1
LIMITATIONS:
1. Fire classification is not part of this acceptance.Refer to the Prepared Roof Tile Assembly for fire rating.
2. All approved products listed herein shall be labeled and shall bear the imprint or identifiable marking of the
manufacturer's name or logo and following statement:"Miami-Dade County Product Control Approved"or the
Miami-Dade County Product Control Seal as shown below.
3. 3M7 2-Component Foam Roof Tile Adhesive AH-160 shall solely be used with flat,low,&high file profiles.
4. Minimum underlayment shall be in compliance with the Roofing Application Standard RAS 120.
5. Roof Tile manufactures acquiring acceptance for the use of 3M"2-Component Foam Roof Tile Adhesive AH-
160 roof the adhesive with their tile assemblies shall test in accordance with TAS 101.
6. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and
Rule 9N-3 of the Florida Administrative Code.
NOA No.:0-M.02
Expiration Date:05/10/17
Approval Date:12/12/13
Page 3 of 11
INSTALLATION:
1. 3MTM 2-Component Foam Roof Tile Adhesive AH-160 may be used with any roof the assembly having a current
NOA that lists uplift resistance values with the use of 3MTM 2-Component Foam Roof Tile Adhesive AH-160.
2. 3MTM 2-Component Foam Roof Tile Adhesive AH-160 shall be applied in compliance with the Component
Application section and the corresponding Placement Details noted herein. The roof tile assembly's adhesive
attachment with the use of 3MTM 2-Component Foam Roof Tile Adhesive AH-160 shall provide sufficient
attachment resistance,expressed as an uplift based system,to meet or exceed the uplift resistance determined in
compliance with Miami Dade County Roofing Application Standards RAS 127. The adhesive attachment data is
noted in the roof tile assembly NOA.
3. 3MTM 2-Component Foam Roof Tile Adhesive AH-160 and its components shall be installed in accordance with
Roofing Application Standard RAS 120,and 3M Company's 3Mm 2-Component Foam Roof Tile Adhesive AH-
160 Operating Instruction and Maintenance Booklets
4. Installation must be by a Factory Trained'Qualified Applicator'approved and licensed by 3M Company.3M
Company shall supply a list of approved applicators to the authority having jurisdiction.
5. Calibration of the Foam Dispenser RTF1000 dispensing equipment is required before application of any adhesive.
The mix ratio between the"A"component and the"B"component shall be maintained between 1.0-1.15(A): 1.0
(B).
6. 3MTM 2-Component Foam Roof Tile Adhesive AH-160 shall be applied with Foam Dispenser RTF1000 or
ProPack®30& 100 dispensing equipment only.
7. 3MTM 2-Component Foam Roof Tile Adhesive AH-1 60 shall not be exposed permanently to sunlight.
S. Tiles must be adhered in freshly applied adhesive.Tile must be set within 1 to 2 minutes after 3MTM 2-
Component Foam Roof Tile Adhesive AH-160 has been dispensed.
9. 3Mm 2-Component Foam Roof Tile Adhesive AH-1 60 placement and minimum patty weight shall be in
accordance with the!Placement Details'herein. Each generic tile profile requires the specific placement noted
herein.
NOA No.: 134502.02
Expiration Date:M0/17
Approval Date:12/12/13
Page 4 of 11
Table 1:Adhesive Placement For Each Generic Tile Proigle
Tile Profile Placement Detail Minimum Paddy Contact Minimum Paddy Gram
Area weight
Eave Coarse-Flat,Low,High All Eave Course 17-23 sq.Inches 45-65
Proilles
Flat,Low,High Profiles #1 17-23 sq.inches 45-65
Flat Profile #2 10-12 sq. inches 30
Law Profile #2 12-14 sq. inches 30
High Profile #2 17-19 sq. inches 30
Flat,Low,High Profiles #3 Two Paddys:8-9 sq.inches at 12 grams per paddy
head of tile 9-11 sq.inches at
overlap
Two-piece Barrel(Cap Tile) Two Piece 2 Beads(1 each longitudinal 17 grams per bead
edge)20-25 sq.inches each
bead
Two Piece Barrel(Pan Tile) Two Piece 65-70 sq.inches 34 grams under pan
LABELING:
All 3hr 2-Component Foam Roof Tile Adhesive AH.160 containers shall comply with the Standard Conditions listed
herein.
BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or applicable building code in order to properly evaluate the installation of this
system.
NOA No.:13.0502.02
ll� Expiration Date:05/10/17
Approval Date:12/12/13
Page 5 of 11
ADHESIVE PLACEMENT DETAIL#1
hroi as*Tw PbWLIGw Proffie Tile
Undwhy ° °f ..` 1. Starting at the cave course,apply a minimum 2"
(50.8 mm)x 10"(254 mm)x 1"(25.4 mm)foam
paddy onto the underlayment positioned as shown,
, under the strengthening rib closest to the overlock
o�. - '-� of the tile being set.
Ewe2. Continue in same manner.Insure approximately 17
° (109.7 Cm2)—23(148.4 cm2)aware inch adhesive
•` contact with the underside of the tile.
Medium Profile/ Double Pan Tile
Na 91 Owsk—Ant
iwbennagabedl
1. Starting at the cave course,apply a minimum 2"
' (50.8 mm)x 10"(254 mm)x 1"(25.4 mm)foam
paddy onto the underlayment positioned as shown
L' under the pan portion of the file closest to the
overlock of the file being set.
2. Continue in some manner.Insure approximately 17
(109.7 cm)—23(148.4 cm2)square inch adhesive
contact with the underside of the tile.
E+w CWOM
EareCaarsa Fast
rao vbolk High Profile/Single Pan Tile
Nihio
° 1. Starting at the cave course,apply a minimum 2"
(50.8 mm)x 10"(254 mm)x 1"(25.4 mm)foam
paddy onto the underlayment positioned as shown
under the pan portion of the tile closest to the
overlock of*e toe being set.
2. Continue in same manner.Insure approximately 17
apdoW
(109.7 cm2)—23(148.4 cm)square inch adhesive
contact with the underside of the tile.
Il Ewtnecot.re �` �a
W-Ph
_ lb
chmmm
NOA No.:13-MM02
Expiration Date:OS/l%17
Approval Date:12/12/13
Page 6 of 11
ADHESIVE PLACEMENT DETAIL.#2
o h e ►MWANSVM FlatffAw Profile Me
° -' Starting at the cave course,apply a minimum 2"(50.8
mm)x 10"(254 mm)x 1"(25.4 mm)foam paddy
onto the underlayment positioned as shown under the
strengthening rib of the the closest to the overlook of
rk. the file being set.Insure approximately 17(109.7 oma)
e . >, —23(148.4 cm2)square inch adhesive contact with the
Emcam underside of the tile.
2. At the second course,apply a minimum 2"(50-8mm)
x 7"(177.8 mm)x 1"(25.4 mm)foam paddy onto the
underlayment positioned as shown under the
strengthening rib closest to the overlook of the tile
Em Cabo SWWO being set.
3. Continue in same manner.Insure approximately 10"
(64.5 cm)- 12(77.4 cm2)square inch adhesive
contact with the underside of the tile.
Medium Profile/Double Pan Tile
trl�en re�badl
1. Starting at the cave course,apply a minimum 2"(50.8
mm)x I0"(254 mm)x 1"(25.4 mm)foam paddy
onto the underlayment positioned as shown under the
pan portion of the the closest to the overlook of the
the being set.Insure approximately 17(109.7 oma)—
�,. 23(148.4 cm2)square inch adhesive conhic t with the
underside of the tile.
2. At the second course,apply a minimum r(50.8mm)
x T'(177.8 mm)x 1"(25.4 mm)foam paddy oWo the
Ea�rectowe underlayment positioned as shown under the pan
Fnm portion of the tale closest to the overlook of the tile
being set.
3. Continue in same manner.Insure approximately 12"
(77.4 cm2)-14(90.3 on?)square inch adhesive
contact with the underside of the tile.
(Instruc#ons continued on next page)
WDA No.: 13-M2.02
Expiration Date:OSAW17
Approval Date:MUD
Page 7 of 11
ADHESIVE PT ACEMENT DETAIL.#2(CONTMM)
rte.Rrnel High Profile/Single Pan Tyle
°
I. Starting at the cave course,apply a minimum 2"(50.8
mm)x 10"(254 mm)x 1"(25.4 mm)foam paddy
onto the underlayment positioned as shown under the
pan portion of the the closest to the Overlock of the
Mir being set.Insure approximately 17(109.7 Cm2)—
• '' 23(148.4 cm)square inch adhesive contact with the
s underside ofthe tale.
2. At the second course,apply a minimum 2"(Sostmn)
co a x 7"(177.8 mm)x 1"(25.4 mm)foam paddy onto the
underlayment positional as shown under the pan
10 s1 a to. portion of the tile closest to the overlock of the file
DrIpedp
being set.
3. Continue in same manner.Insure approximately 1T'
(109.7 Cm2)- 19(122.6 cm)square inch adhesive
contact with the underside of the tile.
NOA No.:13-0502.02
Expiration Date:05/10/17
Approval Date:12l12/13
Pare 3 of 11
ADHESIVE PLACEMENT DETAm#3
110b" 40 1. On the cave course only,apply a minimum 2"(50.8
• s mm)x 10"(254 mm)x 1"(25.4 mm)foam paddy
sae onto the underlayment positioned as shown,under
the strengthening nib for flat the or under the pan
1 0°�8 --• portion of the file for low or high profile file closest
axais. to the overlook of the tile being at Leave
approximately 4"(101.6 mm)up from the cave
edge five of foam to prevent the expanded adhesive
29 OL "" from blocking the weep holes. Insure
approximately 17-23 int(109.7-148.4 cm2)of
IV+ adhesive coact with the underside of the the
2. Apply a 4"(101.6 mm)x 4"(101.6 mm)x 1"(25.4
mm)foam paddy onto the underlayment just below
the second course line positioned foam paddy
under the strengthening rib for flat tile,or under the
pan portion of the tile,closest to the underlock for
taftm the second course tile to be installed. Insure
approximately 9-9 int(51.6-58.1 =)of adhesive
Rom contact with the underside of the tile.
(Instructions continued on next page)
ssata. sat -
FMCOM ae
twa s �
NOA No.: 0402.02
Eapiration Late:MO/17
Approval Late:12/12/13
Page 9 of 11
ADHES1vE PLACEMENT DETAIL#3(CONTRgUED)
3. Also apply a2"(50.8 mm)x 4"(101.6 mm)x'/4"
(19 mm)paddy on top ofthe cave course file
Boom !„ fit � surface as shown,on top of the strengthening n'b
for flat tile or on top of the pan portion of the tile,
i closest to the underlock of the fust course of tile.
. ' Install second coin of tile.Insure approximately
9(58.1 cm)-11 (71cm)square inch adhesive
ti contact with the underside of the the at the overlap
i:a "�.; ' and 7(45.2 cm2)-9(58.1 cm2)square inch
t�e adhesive contact with the underside of the tile at
the head of the tile.Continue in some manner.
.Eue Coorse
D0
+PeoABQI�
NOA No.: 13.0502.02
Expiration Date:0S/10/17
Approval Date:12/12/13
Page 10 of 11
ADHESIVE PLACEMENT DETAIL
TWO PIECE BARREL
up w mad m veasmaa,q.a. gyp;= Two Piece Barrel(Cap and Pan)Tile
m oo�t>rwtbtrtepae tie. reguBad)
I. Starting at the cave course,apply a minimum 2"
ae�aeasare mem (50.8 mm)x 10"(254 mm)x 1"(25A mm)foam
onto the underly eirt
paddy yin positioned as shown
under two adjacent pan tiles.Support cave tiles
from rocking until adhesive has a chance to cure.
2. Continue in same mar mer bringing two pan courses
up toward the ridge.Insure approximately 65
.4 cm
4192 cm2
y c1 ( )—70{451.6 )square inch adhesive
contact with the underside of the pantile.
no 3. Turn covets upside down exposing the underside of
Faedaeoael , the tile.Apply a minimum 1"(25A mm)x 10"(254
ftmeaftp recowncawG&Abato soomd OWnef mm)bead of adhesive direcHy on the inner edge of
pan Go&Emn 88198 od of pa and oove On ateRank at am ML each side of the cover tile.Leave approximately
TWO PIM Barrel- Proflle'�le 3/4"(19 mm)to 1"(25.4 mm)from the outside
edge of the tile,inward,free of foam to allow for
expansion.
4. Turn cover the over after foam is applied and place
onto pan tile course.Insure a minimum of 20(129
cm)-25(161.3 cm)square inch contact area on
each side of the cover tile to the pan tile.Continue
in same manner.Trim away any cured exposed
foam adhesive.Pointing of longitudinal edges of
the cover tiles are considered optional.
5. When additional nailing is required,r(50.8 mm)
x 4"(101.6 mm)milers or the tie wire system
using galvanized,stainless steel,or copper wire and
compatible nails may be used.
END OF TMS ACCEPTANCE
NOA No.:134502.02
l zplmdon Date:05/10/17
Approval Date: 12/12/13
Page 11 of 11
t
t
MIIAMI-DARE COUNTY
s' PRODUCT CONTROL SECTION
BUILDING AND NEIGHBORHOOD COMPLIANCE DEPARTMENT(BNC) 11805 SW 26 Street,Room 208
BOARD AND CODE ADMINISTRATION DIVISION Miami,Morlda 33175-2474
T(786)315-2540 F(786)3154549
NOTICE OF ACCEPTANCE (NOA) www.mianttdade.eov/bnildlnet
Entegra Roof Tile,Inc.
1289 NE 96 Ave.
Okeechobee,FL.34972
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials.
The documentation submitted has been reviewed and accepted by Miami-Dade County BNC-Product Control
Section to be used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction .
(AHJ).
This NOA shall not be valid after the expiration date stated below.The Miami-Dade County Product Control
Section(In Miami Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve the right to
have this product or material tested for quality assurance purposes.If this product or material fails to perform in
the accepted manner,the manufacturer will incur the expense of such testing and the AHJ may immediately
revoke,modify,or suspend the use of such product or material within their jurisdiction. BNC reserves the right to
revoke this acceptance,if it is determined by Miami-Dade County Product Control Section that this product or
material fails to meet the requirements of the applicable building code.
This product is approved as described herein,and has been designed to comply with the Florida Building Code
including the High Velocity Hunicane Zone of the Florida Building Code.
DESC)<tIPTION:Bella"High r Tile
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo,city,state and
following statement: "Miami-Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application,has been filed and there has been no
change in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any
product,for sales,advertising or any other purposes shall automatically terminate this NOA.Failure to comply
with any section of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida,and followed by
the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then it shall
be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors
and shall be available for inspection at the job site at the request of the Building Official.
This renews NOA#04-0512.15 and consists of pages I through 7.
The submitted documentation was reviewed by Alex Tigera.
NOA No.:11-0414.08
n�►ufd Expiration Date:07/13/16
Approval Date-06/02/11
Page 1 of 7
_t
ROOFING ASSEMBLY APPROVAL
Ca Roofing
Sub-Category: Roofing Tiles
Material: Concrete
Deck Tvoe: wood
1. SCOPE
This approves a roofing system using Entegra Bella"High S"concrete roof tile as manufactured in
Okeechobee,FL and described in Section 2 of this Notice of Acceptance. For locations where the
pressure requirements,as determined by applicable Building Code does not exceed the design
pressure values obtained by calculations in compliance with RAS 127 using the values listed in
section 4 herein. The attachment calculations shall be done as a moment based system.
2. ftowCT DESCRIPTION
Maanufactumw Test Product
Anolicant Dimeneious Specifications Descrintlon
Bella"High S" L= 16 K" TAS 112 High profile,interlocking,extruded concrete
W= 13 1/4" roof tile equipped with two nail holes. For
Thickness=%" mechanical,mortar or adhesive set
applications.
Trim Pieces I=varies TAS 112 Accessory trim,concrete roof pieces for use at
w=varies hips,rakes,ridges and valley terminations.
varying thickness
2.1 1VMANIIFAGTURING LOCATION
2.1.1. Okeechobee,FL.
2.2 EVIDENCE SUBMrr TED
Test Asencv Test Identifier Tess Name *Ort plak
IBA Consultants,Inc. 2421-94 ASTM C 1167 June 2006
Redland Technologies 7161-03 Static Uplift Testing Dec. 1991
Appendix III TAS 102& 102(A)
Redland Technologies Letter Dated Aug. 1, Wind Tunnel Testing Aug. 1994
1994 TAS 108(Nail-On)
Redland Technologies . P09647-01 Wind Tunnel Testing Aug. 1994
TAS 108(Mortar Set)
Redland Technologies P0402 Withdrawal Resistance Sept. 1993
Testing of screw vs.smooth
shank nails
NOA No.: 11-0414.08
Expiration Date:07/13/16
Approval Date:W02/11
Page 2 of 7
The Center for Applied 94-083 Static Uplift Testing April 1994
Engineering,Inc. TAS 101 (Adhesive Set)
The Center for Applied 94-084 Static Uplift Testing May 1994
Engineering,Inc. TAS 101 (Mortar Set)
The Center for Applied 25-7094-(3,6& 9) Static Uplift Testing Oct. 1994
Engineering,Inc. TAS 102
The Center for Applied 25-7120-(1 &2) Static Uplift Testing Nov. 1994
Engineering,Inc. TAS 102
t The Center for Applied 25-7183-(3&4) Static Uplift Testing Feb. 1995
Engineering,Inc. TAS 102
The Center for Applied 25-7214-(3,4,&7) Static Uplift Testing March, 1995
Engineering,Inc. TAS 102
The Center for Applied 25-78044 Static Uplift Testing Sep. 1996
Engineering,Inc. TAS 102
Celotex Corporation 520111-3 Static Uplift Testing Dec. 1998
Testing Services TAS 101
Celotex Corporation 520191-2.1 Static Uplift Testing March 1999
Testing Services TAS 101
Walker Engineering,Inc. Calculations Aerodynamic Multiplier March 1999
Walker Engineering,Inc. Calculations Restoring Moment June 2007
3. LIMITATIONS:
3.1 Fire classification is not part of this acceptance.
3.2 For mortar or adhesive set tile applications,a static field uplift test in accordance with TAS
106 may required,refer to applicable building code.
3.3 Applicant shall retain the services of a Miami-Dade County Certified Laboratory to perform
quarterly test in accordance with TAS 112,appendix `A', Such testing shall be submitted to
the Building and Neighborhood Compliance Department—Product Control Section for review.
3.4 Minimum underlayment shall be in compliance with the applicable Roofing Applications
Standards listed section 4.1 herein.
3.5 30190 hot mopped underlayment applications may be installed perpendicular to the roof slope
unless stated otherwise by the underlayment material manufacturers published literature.
3.6 This acceptance is for wood deck applications. Minimum deck requirements shall be in
compliance with applicable building code.
NOA No.:11-0414.08
Expiration Date:07!13/16
Approval Date:06/02/11
Page 3 of 7
i
4. INSTALLATION
4.1 Lntegra Sales,Inc.'s Bella"High S" concrete roof tile and its components shell be installed
in strict compliance with Roofing Application Standard RAS 118,RAS 119 and RAS 120.
4.2 Data For Attachment Calculations
Table 1: Average Weight(W)and Dimensions(I x w)
Tile Profile Welght-W(Ibf) Length-1(ft) Width-w(ft)
Bella
"High S"Tile 10.5 1.375 1.08
Table 2: Aerodynamic Multipliers-A ft
Tile A(ft A( )
Profile Batten Application Direct Deck Application
Bella"High S"Tile 0.349 0.378
Table 3: Restorino Moments due to Gravity- ft-i
Tile 2":12" 3":12" 4":12" 50:12" 6":12" Greater than
Profile 7"':12"
Bella"High Battens Direct Battens Direct Battens Direct Battens Direct Battens Direct Battens Direct
S"Tile Deck Deck I Deck I Deck Deck Deck
6.19 1 6.89 1 6.11 1 6.80 1 5.99 8.67 5.85 1 6.51 5.88 8.33 5.50 6.13
Table 4: Attachment Resistance Expressed as a Moment-Mf(ft4bf)
for Nall-On System
Tile Fastener Type Direct Deck Direct Deck Battens
Profile (min 15132"plywood) (min.19/3211 plywood)
Bella"High 2-10d Fting Shank Nails 28.6 41.2 19.4
S"Tile 1-10d Smooth or Screw 5.1 6.8 2.8
Shank Nail
2-10d Smooth or Screw 6.9 9.2 7.3
Shank Nails
1#8 Screw 20.7 20.7 18.1
2#8 Screw 43.2 43.2 29.8
1-10d Smooth or Screw 23.1 23.1 19.0
Shank Nail Field Clip)
1-10d Smooth or Screw 29.3 29.3 24.0
Shank Nall Eave Clip)
2-10d Smooth or Screw 27.6 27.6 38.6
Shank Nails Field Clip)
2-10d Smooth or Screw 1 38.1 38.1 41.6
Shank Nails Eave Clip)-]
2-10d Ring Shank Nails 1 1 33.1 T 48.1 80.9
1. Installation with a 4"tale headlap and fastemers are located a min.of 2W from head of file.
NOA No.: 11-0414.08
Expiration Date:07113/16
Egli Approval Date:06/02/11
Page 4 of 7
Table 5: Attachment Resistance Expressed as a Moment Mf(ft-lbf)
for Two Patty Adhesive Set Systems
The Tile Application Minimum Attachment
Profile Resistance
Bella"High S"Tile Adhesive 29.3
1 See manufactures component approval for installation requirements.
2 Flexible Products Company 11leBond Average weight per patty 10.7 grams.
Polyfoam Product Inc.Average welpht per Patty 8 orams.
Table 6: Attachment Resistance Expressed as a.Moment-Mf(ft-lbf)
for Single Patty,Adhesive Set Systems
Tile Tile Application Minimum Attachment
Profile Resistance
Bella"High S"Tile Polyfoam PolyProTm 66,8
Po oam Pol ProTM 38.
3 ePatty Placement of 63grams of Pal ProTm.
4 Medium Patty placement of 24 rams of Pol ProTm.
Table 7:Attachment Resistance Expressed as a Moment-Mf(ft-lbf)
for Mortar Set Systems
Tile Tile Attachment
Profile Application Resistance
Bella"High S"Tile Mortar Set 24.6
5 TUe-Tfte Roof Tile Mortar.
NQA No.:11-0414.08
sum&
Expiration Date:07/13116
Approval bate:06/02/11
Page 5 of 7
5. LABELING
5.1 All tiles shall bear the imprint or identifiable marking of the manufacturer's name or logo as
seen in detail below, or following statement: "Miami-Dade County Product Control
Approved".
OR
R A
E N T
ENTEGRA SALE$BELLA"HIGH S"CONCRETE TILE LABEL
(LOCATED UNDERNEATH TILE)
6. BUILDING PERMIT REQUIREMENTS
6.1 Application for building permit shall be accompanied by copies of the following:
6.1.1 This Notice of Acceptance.
6.1.2 Any other documents required by the Building Official or applicable building code
in order to properly evaluate the installation of this system.
MOA No.: 11-0414.08
a Rxpiratlon Date:07/13/16
Approval Date:06/02/11
Page 6 of 7
J
PROFILE DRAwiNc.
•
111 13-214 11
END OF THIS ACCEPTANCE
NOA No.: 11-0414.08
aaae Expiration Date:07/13116
Approval Date:06/M 1
Page 7 of 7