RF-14-2639Inspection Worksheet
Miami Shores Village
10050 N.E. 2nd Avenue Miami Shores, FL
Phone: (305)795-2204 Fax: (305)756-8972
Inspection Number: INSP-226256 Permit Number: RF -12-14-2639
Scheduled Inspection Date: February 27, 2015 Permit Type: Roof
Inspector: Rodriguez, Jorge Inspection Type: Final Roof
Owner: , Work Classification: Flat
Job Address: 126 NW 101 Street
Miami Shores, FL
Project: <NONE>
Contractor: APC ENGINEERING ENTERPRISES INC
Building Department Comments
REMOVE FLAT CONCRETE TILE AND INSTALL A
BARREL TYPE TILE ROOF SYSTEM
Phone Number (305)219-8267
Parcel Number 1131010220190
INSPECTOR COMMENTS False
Inspector Comments
Phone: (305)219-8267
Passed CREATED AS REINSPECTION FOR INSP-224451. Missing renailing
affidavit
Failed7-
Correction
Needed
Re -Inspection ❑
Fee
No Additional Inspections can be scheduled until
re -inspection fee is paid.
February 26, 2015 For Inspections please call: (305)762-4949 Page 8 of 28
•
AFFIDAVIT OF COMPLIANCE WITH ROOF DECKING ATTACHMENT AND SECONDARY
WATER BARRIER HURRICANE MITIGATION RETROFIT FOR EXISTING SITE -BUILT
SINGLE FAMILY RESIDENTIAL STRUCTURES
PURSUANT TO SECTION 553.844 F.S.
To: Miami -Dade County Building Department
11805 Coral Way, Suite 111
Miami, FL 33175
Re: Owner's Name 20kUy Mkt , �) M O .u -vi Ve sl m e v'T S
Property Address (Z(o N• w t o l C+.
Roofing Permit Number
Dear Building Official:
I 3AS r% ctA fa<. certify that the roof decking attachment and fasteners have been
strengthened and corrected and a secondary water barrier has been provided as required by the "Manual
of Hurricane Mitigation Retrofits for Existing Site -Built Single Family Structures adopted by the
Florida Building Commission by Rule 9B-3.047 F.A.C.
Qualifying Agent
Si ature of Qualifying Agent
1A Gia
Print Name
STATE OF FLORIDA COUNTY OF MIAMI-DADE
Sworn to and subscribed before me this I
day of 10 120 � 5
(SEAL)
/Personal �°�,�� SANDY ROMERO
iary Public State of Florida
or Produ ti de iJ �i MY Comm. Exp
ifes Jul 25, 2015
Commission # EE 116040
C:\Documents and Seningslrtc I\My Docoments\StatisticsGraphs_2\Rwfing Affidavit Compliance -9 26 07Fillable.doc
Miami Shores Village
Building Department DEC 0 4 2014
10050 N.E.2nd Avenue, Miami Shores, Florida 33138
Tel: (305) 795-2204 Fax: (305) 756-8972 _
INSPECTION LINE PHONE NUMBER: (305) 762-4949
BUILDING
PERMIT APPLICATION
❑BUILDING ❑ ELECTRIC P/ROOFING
FBC 20 ro
Master Permit No .0 I q 26-89
Sub Permit No.
❑ REVISION ❑ EXTENSION [:]RENEWAL
❑PLUMBING [—]MECHANICAL ❑PUBLIC WORKS ❑ CHANGE OF ❑ CANCELLATION ❑ SHOP
CONTRACTOR DRAWINGS
JOB ADDRESS: 1 `Z 4o /)'W 1015+" ,
City:
015+ -
City: Miami Shores County: Miami Dade Zip: 331 Sb
Folio/Parcel#: 1 I 3 10 1 ^ 0 -Z-L O t `t (� Is the Building Historically Designated: Yes NO
Occupancy Type: S f' Load: Construction Type: 1` 4S_�_Flood Zone: BFE: FFE:
OWNER: Name (Fee Simple Titleholder): Ab fn D Z- y),JPS+ 01 eve+ S Ca -1 p- Phone#:
Address:j-
City: Zip: �3oZZ (
Tenant/Lessee Name: Phone#:
Email:
CONTRACTOR: Company Name: KP(! �Phone#:
Address: 7 ( 50 w
City: 41 Q 1'a h State: cu Zip: 33 0 1
Qualifier Name: CCavl—K- Phone#: 305-21 7
State Certification or Registration #: CCC 133 001 C Certificate of Competency #:
DESIGNER: Architect/Engineer:
Add
Phone#:
City: State: Zip:
Value of Work for this Permit: $ � 8060—%-.3 Square/LinearrFF000ttage of Work:
Type of Work: ❑ Addition ❑ Alteration ❑New E—
Type
1%00
❑ Demolition
Description of Work: 9--Pt'nwv-P— i'2. < <A
a c r�e 1 TUI Q e T, 1 dig s stgq--,
Specify color of color thru tile: (Z e -cry, c�
^
Submittal Fee $ Permit Fee $ ` : I ._` ° ' M1 .°J CCF $ 44r C co/cc$
}
Scanning Fee $ �I 3- Radon Fee $ ( DBPR $ b� Notary $
Technology Fee $ �" Training/Education Fee $% Double Fee $
Structural Reviews $ Bond $
TOTAL FEE NOW DUE $�CC7
(Revised02/24/2014)
o b - (0 Go
Bonding Company's Name (if applicable)
Bonding Company's Address
City
State
Mortgage Lender's Name (if applicable)
Mortgage Lender's Address
City
State
Zip
Zip
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRIC, PLUMBING, SIGNS, POOLS,
FURNACES, BOILERS, HEATERS, TANKS, AIR CONDITIONERS, ETC.....
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING
YOUR NOTICE OF COMMENCEMENT."
Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subject to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site
for the first inspection which occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the
inspection will not be approved a d a reinspection fee will be charged.
Signature Signatur,(,�ozat,�
OWNER AGENT CONTRACTOR
The foregoing instrument was acknowledged before me this
17— day of 20 VY by
IINJ QV si 0.1!e.2 who is per onally known
me or who has produced as
identification and who did take an oath.
NOTARY PUBLIC:
Sign: t` L'
Sedl' .*S Commission # EE 116040
My Commission Expires
�''•,;9 July 26. 2015
The foregoing instrument was acknowledged before me this
C2/ day of 1 20 --�- by
IALA i)1.&t� , who is ei Elly know to
me or who has produced
identification and who did take an oath.
NOTARY PUBLIC:
Sign: 'v ,j
Print:
Seal:JA
**************************************�*(**************************
APPROVED BY �� ` ` (� l� Plans Examiner
Structural Review
(Revised02/24/2014)
I/
y S-1.4uY jiUMCKv
,,,,;mi56i0n # EE 116040
My C,)mmissin015ires
,,,!y 2
2b, _ 0151
as
************************************
Zoning
Clerk
F r STATE OF FLORIDA
DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION
% CONSTRUCTION INDUSTRY LICENSING BOARD (880) 487-1396
.' 1940 NORTH MONROE STREET
TALLAHASSEE FL 32399-0783
CLARK, JASON M
APC ENGINEERING ENTERPRISES INCORPORATED
11200 NW 7 ST
PLANTATION FL 33325
Congratulations! With this license you become one of the nearly
one minion Floridians licensed by the Department of Business and
Professional Regulation. Our professionals and businesses range
from architects to yacht brokers, from boxers to barbeque restaurants,
and they keep Florida's economy strong.
Every day we work to improve the way we do business in order to
serve you better. For information about our services, please log onto
www.myfiortdallcense.com. There you can find more information
about our divisions and the regulations that impact you, subscribe
to department newsletters and learn more about the Department's
initiatives.
Our mission at the Department is: License Efficiently, Regulate Fairly.
We constantly strive to serve you better so that you can serve your
customers. Thank you for doing business in Florida,
and congratulations on your new license!
DETACH HERE
RICK SCOTT, GOVERNOR
KEN IAWSON, SECRETARY
STATE OF FLORIDA
DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION r_s
CONSTRUCTION INDUSTRY LICENSING BOARD
CCC1330016
"he ROOFING CONTRACTOR
Narned DetoW i5 CERTIFIED, sae
Under the provisions of Chapter 489 FS.
Expiration date: AUG 31, 2016
71
K, JASON M 0��0
d
• •Y� WE
JEFF ATWATER
CHIEF FINANCIAL OFFICER STATE OF FLORIDA
DEPARTMENT OF FINANCIAL SERVICES
DIVISION OF WORKERS' COMPENSATION
" * CERTIFICATE OF ELECTION TO BE EXEMPT FROM FLORIDA WORKERS' COMPENSATION LAW * "
CONSTRUCTION INDUSTRY EXEMPTION
This certifies that the individual listed below has elected to be exempt from Florida Workers' Compensation law.
EFFECTIVE DATE: 11/4/2013 EXPIRATION DATE: 11/4/2015
PERSON: CLARK JASON M
FEIN: 200290135
BUSINESS NAME AND ADDRESS:
APC ENGINEERING ENTERPR
11200 NW 7 ST
PLANTATION FL 33325
SCOPES OF BUSINESS OR TRADE:
LICENSED ROOFING
CONTRACTOR
Pursuant to Chapter 440.05(14), F.S., an officer of a corporation who elects exemption from this chapter by filing a certificate of election under this section may
not recover benefits or compensation under this chapter. Pursuant to Chapter 440.05(12), F.S., Certificates of election to be exempt.., apply only within the scope
of the business or trade listed on the notice of election to be exempt. Pursuant to Chapter 440.05(13), F.S., Notices of election to be exempt and certificates of
election to be exempt shall be subject to revocation if, at any time after the filing of the notice or the issuance of the certificate, the person named on the notice or
certificate no longer meets the requirements of this section for issuance of a certificate. The department shall revoke a certificate at any time for failure of the
person named on the certificate to meet the requirements of this section.
DFS-F2-DWC-252 CERTIFICATE OF ELECTION TO BE EXEMPT REVISED 07-12 QUESTIONS? (850)413-1609
s,,,,,,,, Miamishores Village
-
as Building Department
4P kr
10050 N.E.2nd Avenue
Miami Shores, Florida 33138
Tel: (305) 795.2204
Fax: (305) 756.8972
Notice to Owner - Workers' Compensation Insurance Exemption
Florida Law requires Workers' Compensation insurance coverage under Chapter 440 of the Florida Statutes. Fla. Stat. § 440.05
allows corporate officers in the construction industry to exempt themselves from this requirement for any construction project prior to
obtaining a building permit. Pursuant to the Florida Division of Workers' Compensation Employer Facts Brochure:
An employer in the construction industry who employs one or more part-time or full-time
employees, including the owner, must obtain workers' compensation coverage. Corporate officers
or members of a limited liability company (LLC) in the construction industry may elect to be
exempt if:
1. The officer owns at least 10 percent of the stock of the corporation, or in the case of
an LLC, a statement attesting to the minimum 10 percent ownership;
2. The officer is listed as an officer of the corporation in the records of the Florida
Department of State, Division of Corporations; and
3. The corporation is registered and listed as active with the Florida Department of
State, Division of Corporations.
No more than three corporate officers per corporation or limited liability company members are
allowed to be exempt. Construction exemptions are valid for a period of two years or until a
voluntary revocation is filed or the exemption is revoked by the Division.
Your contractor is requesting a permit under this workers' compensation exemption. In these circumstances, Miami Shores Village
does not require verification of workers' compensation insurance coverage from the contractor's company. Therefore, you maybe
personally liable for the worker compensation injuries of any person allowed to work under this permit. Please check with your
insurance carrier since most property insurance policies DO NOT cover this type of liability.
BY SIGNING BELOW YOU ACKNOWLEDGE THAT YOU HAVE READ THIS NOTICE AND UNDERSTAND ITS
CONTENTS.
Owner
Print Na e� Vl I I, t Print Na
r
Signature: C.�, Signatul
State of Florida )
County of Miami -Dade )
Sworn to and subscribed before met this
day of , 20.
By_(�
(SEAL)
State
County of Miami -Dade )
Sworn to and subscribed before me s
day of , 20.
BylI.SD?�
Contractor
(SEAL)
Commi KVMERO „ *__ Commission II EE 116040
°* ssion # E
M 11 0 = My Commission Expires
604 : ,
-'I•eOFF� r Y Commission Expiresfem July 26, 2015
July 26, 2015 —Y-�
AC4RDnCERTIFICATE OF LIABILITY INSURANCE
DATE (MM
12/04/20141
PRODUCER (954) 966-9993
Gulfstream Insurance Agency,
J cy, Inc..
5833 Johnson Street
Hollywood FL 33021-
THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION
NLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE
HOLDER. THIS CERTIFICATE DOES NOT AMEND, EXTEND OR
ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW,
INSURERS AFFORDING COVERAGE NAIC #
INSURED
APC Engineering Enterprises Inc. dba
All. Pro Contracting Group Inc.
2150 West 10th Ave.
Hialeah FL 33010-
INSURER A: INTERNATIONAL INS CO
INSURER B:
INSURER G:
INSURER D:
INSURER E:
THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY
REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN,
THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES.
AGGREGATE LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS.
INSR
LTR
ADD'L
NERD
TYPE OF INSURANCE
POLICY NUMBER
POLIC
DATE (MM/DDlYVE
POLICY
MMIDDIYYIN
LIMITS
GENERAL LIABILITY
IG06CO0194100-01
10/20/2014
10/20/2015
EACH OCCURRENCE $ 1,000,000
PREMISES Ea occurrence)$ 100,000
x COMMERCIAL GENERAL LIABILITY
MED EXP (Any one person $ 5,000
A
CLAIMS MADE I `- OCCUR
,
PERSONAL &ADV INJURY $ 1,000,000
I
I I
GENERAL AGGREGATE $ 2,000,000
GEN'L AGGREGATE LIMIT APPLIES PER:
PRODUCTS - COMPIOP AGG $ 2,000,000
X POLICY JJECOT M LOC
AUTOMOBILE
LIABILITY
ANY AUTO
COMBINED SINGLE LIMIT
(Ea accident) $
BODILY INJURY $
(Per person)
ALL OWNED AUTOS
SCHEDULED AUTOS
BODILY INJURY $
(Per accident)
HIRED AUTOS
NON -OWNED AUTOS
PROPERTY DAMAGE $
(Per accident)
GARAGE LIABILITY
AUTO ONLY - EA ACCIDENT $
OTHER THAN EA ACC $
ANY AUTO
AUTO ONLY: AGG $
EXCBSSIUMBRELLA LIABILITY
>'
EACH OCCURRENCE $
AGGREGATE $
OCCUR CLAIMS MADE
$
DEDUCTIBLE
$
RETENTION $
WORKERS COMPENSATION AND
/
/
$
TORY L MITS ER
E.L. EACH ACCIDENT $
EMPLOYERS' LIABILITY
ANY PROPRIETORIPARTNERIEXECUTIVE
OFFICERIMEMBER EXCLUDED?
%
E.L. DISEASE - EA EMPLOYEE $
E.L. DISEASE -POLICY LIMIT S
If yes, describe under
SPECIAL PROVISIONS below
OTHER
%
DESCRIPTION OF OPERATIONSILOCATIONSIVEHICLESIEXCLUSIONS ADDED BY ENDORSEMENT/SPECIAL PROVISIONS
General Contractor/Roofing Contractor
City of Miami Shores
Building Dept.
10050 NE 2nd Avenue
Miami Shores FL 33138-
ACORD 25 (2001108)
INS025 (oioe).os
SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE
EXPIRATION DATE THEREOF, THE ISSUING INSURER WILL ENDEAVOR TO MAIL
10 DAYS WRITTEN NOTICE TO THE CERTIFICATE HOLDER NAMED TO THE LEFT, BUT
FAILURE TO DO SO SHALL IMPOSE NO OBLIGATION OR LIABILITY OF ANY KIND UPON THE
AUTHORIZED
ACORD CORPORATION 1988
Page 1 of 2
Local Business Tax Receipt
Miami -Dade County, State of Florida
THIS IS NOT BILL - DO NOT PAY
7178923
BUSINESS NAME/LOCATION
APC ENGINEERING
ENTERPRISES INC
2150 W 10 AVE
HIALEAH, FL 33010
RECEIPT NO. EXPIRES
NEW BUSINESS SEPTEMBER 30, 2015
7459139 Must be displayed at place of business
Pursuant to County Code
Chapter 8A - Art. 9 & 10
OWNER SEC, TYPE OF BUSINESS PAYMENT RECEIVED
APC ENGINEERING ENTERPRISES 196 SPECIALTY BUILDING BY TAX COLLECTOR
INC CONTRACTOR 45.00 12/04/2014
r./r) nAvin niPl ini IA PRFS
Worker(s) 5 CCC1330016 0224-15-001605
This Local Business Tax Receipt only confirms payment of the Local Business Tax. The Receipt is nota license,
permit or a cordfication of the holder's qualifications, to do business. Holder must comply with any governmental
or nongovernmental regulatory laws and requirements which apply to the business.
The RECEIPT N0. above most be displayed on all commercial vehicles Miami -Dade Code Sec Ila -276.
M . IA DMAD for more information, visit www miamidede ffAMcoilec1M
GF N: 20140829580 BOOK 29414 PAGE 1810
DATE: 12/04/2014 08:55-35 AM
HARVEY RUVA, CLERK OF COUR. . MIA -DARE CTY
Return Original to:
Levinson, Gritter & DiGiore, LLP
200 S, Andrews avenue, Suite 903
Ft. Lauderdale, FL 33301
CERTIFICATE OF APPOI-NiTMENT OF SUCCESSOR TRUSTEE
We the undersigned, being all of the beneficiaries under that ccriain trust known as the CFKEATffVf7 RF, -
SOLUTIONS, LLC, a Florida limited liability company", AS TRUSTEE OF THE, 126 NW 161 IT S FR EL F 1, A N D
"RUST U/A/D November 20, 2014 (the "Tnisl"), Owner of Property legally described on the attached Exhibit
'A", by and between the undersigned and CREATIVE RE-SOLUTTO-INS, LLC, a Florida linnited liability
company, as the original Trustee, do hereby certify that we have this day duly elected, DMD NVEST.1;VIENT
GROUP, LLC, a Florida limited liability company, to succeed to the office- of TRUSTEE Linder the '7 -rust, and to
the title of all the properties of the Trust, with all the powers and subject to all the restrictions upon the ori-ioa!
Trustee, with the same powers, rights and interest regarding the Trust property and subject the same . , t
- i e restriction',',
and duties as the original Trustee, CXC:Cpt M The same shall have been heretofore modi tied by amendment,
CFN; 20140829580 BOOK 29414 PAGE 188'.?
, Wf f \''FSS WHEREOl�, the said ORIGI'v',1T, TRUSTEE has hereunto set his hand and seals this is �`
I da, of
November, 2014,
I1 'WITN
fJ!'�
STATE OF FLORIDA
COUNTY Ol-' MIAMI DADT
ORIGINAL TRUSTEE AND REN-TiCIARY:
CREATIVE RE -SOLUTIONS, l_T,C,
AFlorida 'inihegYlliabil't compa:��--
BY:
Alex T2. Parco, Manating \ate;tt>> r
Sworn to and s Libsedbed before me t}tis clay of November, 2014 by Alex R. Pardo as t1,3ar;agit;g Nil cni1;ler int
Creative RE- olution ,LC, a Florida limited liability company, as Original Trustee and Beneficiary. He is
knmvri to rn ocrsonally has produced his Florida driver's license as identification
PFt07228IR
E
S March 27, 2018Eohd=NalarySer&e.cam
-Cq��P;iiSSlOt�
CFN: 20140829580 BOOK. 29414 PAGE 1812
JN WITNESS WHEREOF the New TRUSTEE aforesaid has hereto set his hand and sea] this day of
November. 2014.
STATE OF FLORIDA
COUNTY OF MIAMI DADE
NEW'FRUS'FEE:
1)VD.fNVf.,S'!'-'0FN GROUP, U,C,
a Florida limited liability conipany
D N 1
avr'j4
Rodriguez, "TallAor
Sworn to and subscribed before, me th s day of November, 2014 by L
N-VES'I-MjENT QR-0U')LLC' a Florida limited liability con -,pony. He is
PrOdUCed L as identification.
NlotbW Si
Z"
JOSE 11, TADARES
s .rotary Public - state of Flarld-1
J4 N4 CUMM. ExPaikkar2l, 2017-•
Corn migsion OFF .O 1067
d RodrigW-,ZaS Manager of'DN-10
,fi ILO Inc PC]-7ozlaljjy C11' `tEi
CF\: 20140829580 SOCK 29414 PAGE 18^3
EXHIBIT "A"
East li2 of Lot 2, and al_l of Lot 3, hi Block 3, of GOLD CRI. ST, according to the
plat thereof recorded at Plat Hook 21, Page 56, in the Public Records of ivliami-
Dade County, Florida.
n ff x�""ff■ u■ "�ffm
4
Florida Building Code Edition 2010
High Velocity Hurricane Zone Uniform Permit Application Foran
INSTRUCTION PAGE
COMPLETE THE NECESSARY SECTIONS OF
THE UNIFORM ROOFING PERMIT
APPLICATION FORM AND ATTACH THE
REQUIRED DOCUMENTS AS NOTED BELOW:
Roof System
Required Sections of the
Penult Application Foram
Attachments Required
See List Below
Low Slope Application
A,B,C
1,2,3,4,5,6,7
Prescriptive BUR -RAS 150
A,B,C
4,5,6,7
Asphaltic Shingles
A,B,D
1,2,4,5,6,7
Concrete or Clay Tile
A,B,D,E
1.2.3.4.5,6,7
Metal Roofs
A,B,D
1,2,3,4,5,6,7
Wood Shingles and
Shakes
A,B,D
1,2,4,5,6,7
Other
As Applicable
1,2,3,4,5,6,7
ATTACHMENTS REQUIRED:
1.
Fire Directory Listing Page
1.2.
From Notice of Acceptance:
Front Page
Specific System Description
Specific System Limitations
General Limitations
Applicable Detail Drawings
.
--,Design Calculations per Chapter 16, or If Applicable, RAS 127 or
RAS 128
4.
-Other Component Notice of Acceptances
Municipal Permit Application
6.
Owners Notification for Roofing Considerations Re -Roofs On
7.
Any Required Roof Testis /Calculation Documentation
123 01-48 1/13 PAGE 1
Florida Building Code Edition 2010
High Velocity Hurricane Zone Uniform Permit Application Form
Section E (Tile Calculations)
For Moment based the systems, choose either Method 1 or L Compared the values
for M,wlth the values from M h If the Mf values are greater than or equal to the Mr
values, for each area of the roof; then the tale attachment method is acceptable.
Method 1 "Moment Based Tile Calculations Per RAS 127"
(Pi: '4$1 z). DZ $ 4 - (t. Z 9 —Mg: 6-67 _ r4i q.6 NOA Mf
(p'2: 6S • 1 z IQ�a 19 • Gf i — Mg:6 =11 az • fi I1 NOA W*(P3:1 D®-1 z � DLS'q = `Zq P - Mg: 6 Z.7' f NOA Mr
Method 2 "Simplified Tile Calculation Per Table Below"
Required Moment of Resistance (M,.) From Table Below 30. %4 NOA Mf 06.6
*Must be used in conjunction with a list of moment based tile systems endorsed by the
Broward County Board of Rales and Appeals.
For Uplift based file systems use Method 3. Compared the values for F' with the
values for Fr. If the F• values are greater than or equal to the Fr values, for each
are&of the roof, then the tile attachment method is acceptable.
Method 3 "Uplift Based Tile Calculations Per RAS 127"
(P, : z 1: = z w: = _a — W: z cos B: = Fri: NOA F'
(P2: a 1: = a w: = `) — W: a cos B: = Fr2: NOA F'
(P3 : z l: z w: = — J — W: z cds 9: = Fr3: NOA F
M, Required Moment Resistance*
Description
Mom Rod Height —
Roof slope 115'
20' 25'
30' 40'
2:12
34A 36.5 38.2.7
Mean Roof Heigbt
3:12
34A 30.0
37. 39.
• 2
A3L2 33.8
35.
28A 30.1 31A
32.8 34.9
&12
26A 28.0 29.4
30.5 32
712
NA 25.8 V.1
20.2
*Must be used in conjunction with a list of moment based tile systems endorsed by the
Broward County Board of Rales and Appeals.
For Uplift based file systems use Method 3. Compared the values for F' with the
values for Fr. If the F• values are greater than or equal to the Fr values, for each
are&of the roof, then the tile attachment method is acceptable.
Method 3 "Uplift Based Tile Calculations Per RAS 127"
(P, : z 1: = z w: = _a — W: z cos B: = Fri: NOA F'
(P2: a 1: = a w: = `) — W: a cos B: = Fr2: NOA F'
(P3 : z l: z w: = — J — W: z cds 9: = Fr3: NOA F
12301-48 1/13 PAGE
Where to Obtain Information
Description
Symbol
Where to find
Design Pressare
Pl orP2 orP3
RAS 127 Table 1 or by an engineering analysis prepared by PE based on ASCE
7
Mean Roof Heigbt
H
Job Site
Roof Slope
g
Job Site
Aerodynamic lier
NOA
Restoring Moment due to GMVity
NOA
Attachment Resistance
Mr
NOA
Required Moment Resistance
K
Calculated
hfinirman Attachment Resistance
F
NOA
Reqnired Uplift Resistance
F:
Calculated
AverageTile—Wreigbt
W
NOA
Tile Dimensions
17— length
W-- width
NOA
All maculation must be submitted to the Building Official at the time ofpermit applikation.
12301-48 1/13 PAGE
Florida Building Code Edition 2010
High Velocity Hurricane Zone Uniform Permit Application Form
Section D (Steep Sloped Roof System)
Roof System Manufacturer:
Notice of Acceptance Number: 0 Z -
Minimum Design Wind Pressures, If Applicable (From RAS 127 or Calculations):
PI: 2� - r P2: - P3:
Maximum Design Pressure
From the NOA Specific System): G
Method of the attachment: eo �A Sc4 1-r-5 f� a4 ,
Steep Sloped Roof System Description
Deck Type:
Roof Slope:
12
Ridge Ventilation?
O 'D
+a" d 6- d ec-V- h
Underlayment:
Iation:
Mean Roof Height: Z
12301-48 1/13 PAGE 4
30 PS -R Se s V) ee. + \ `T1j, -pjut
0 \P",
+l�1V'-11
& Spacing:
1 �l4 S
Type
61v 51L�'+ o he, �oo� °►e a�
Cap Sheet:
oaf Covering: "
Type & Size Drip
C
ge:
MIAM>•UADE MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
BUILDING AND NEIGHBORHOOD COMPLIANCE DEPARTMENT (BNC) 11805 SW 26 Street, Room 208
BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA) www.mitimidade.izov/buildinp-/
Entegra Roof Tile, Inc.
1289 NE 9" Ave.
Okeechobee, FL. 34972
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials.
The documentation submitted has been reviewed and accepted by Miami -Dade County BNC - Product Control
Section to be used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction
(AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control
Section (In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right
to have this product or material tested for quality assurance purposes. If this product or material fails to
perform in the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may
immediately revoke, modify, or suspend the use of such product or material within their jurisdiction. BNC
reserves the right to revoke this acceptance, if it is determined by Miami -Dade County Product Control
Section that this product or material fails to meet the requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Estate "S" Tile
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and
following statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no
change in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any
product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply
with any section of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by
the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall
be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors
and shall be available for inspection at the job site at the request of the Building Official.
This renews NOA # I0-0518.03 and consists of pages 1 through 6.
The submitted documentation was reviewed by AIex Tigera.
NOA No. 11-0510.02
Expiration Date: 08/23/16
MAN DpDE G Approval Date: 0630/11
• Page 1 of 6
ROOFING ASSEMBLY APPROVAL
Category: Roofing
Sub Category: Roofing Tiles
Material: Concrete
L SCOPE
This approves a roofing system using Entegra Estate "S" Concrete Roof Tile, as manufactured by
Entegra Roof Tile, Inc. in Okeechobee, FL. as described in Section 2 of this Notice of Acceptance,
designed to comply with the Florida Building Code for High Velocity Hurricane Zone. For the
locations where the pressure requirements, as determined by applicable Building Code, does not
exceed the design pressure values obtain by calculations in compliance with RAS 127 using the
values listed in section 4 herein. The attachment calculations shall be done as a moment based
system.
2. PRODUCT DESCRIPTION
Manufactured by Test Product
Applicant Dimensions Specifications Description
Entegra Estate `S' 1= 16-1/2" TAS 112 Low profile, interlocking, extruded concrete
Roof Tile w = 13" roof the equipped with two nail hole and
double roll ribs. For direct deck or battened
nail -on, mortar or adhesive set applications
Trim Pieces
1= varies TAS 112 Accessory trim, concrete roof pieces for use
w = varies
at hips, rakes, ridges and valley
varying thickness
terminations. Manufactured for each tile
profile.
2.1 MANUFACTURING LOCATION
2.1.1. Okeechobee, FL.
2.2 EVIDENCE SUBMITTED:
Test Agency
Test Identifier
Test Name/Report Date
Redland Technologies
7161-03
PA 102 Dec. 1991
7161-03
PA 102(A) Dec. 1991
7161-03
PA 108 Dec. 1991
P0402
Withdrawal Resistance Testing of Sept. 1993
screw vs. smooth shank nails
P0631-01
PA 108 July 1994
Letter Dated Aug. 1, 1994
PA 108 Aug. 1994
Professional Service
224-47099
PA 112 Sept. 1994
Industries, Inc.
The Center for Applied
94-060B
PA 101 March, 1994
NOA No. 11-0510.02
Expiration Date: 08/23/16
MLMNMDecoun�W
Approval Date: 06/30/11
' " '
Page 2 of 6
Test Agency Test Identifier Test Name/Report Date
Engineering, Inc. 94-084 PA 101 May 1994
25-7094-1 PA 102 Oct. 1994
25-7094-7 PA 102 Oct. 1994
25-70944 PA 102 Oct. 1994
Project No. 307025 PA 100 Oct. 1994
Test #MDC -76
25-7183-1 PA 102 Feb. 1995
25-7183-2 PA 102 Feb.1995
25-7214-2 PA 102 March, 1995
25-7214-6 PA 102 March, 1995
Celotex Corporation 528454-2-1 PA 101 Sep. 1998
Testing Services 520109-2 Dec. 1998
Walker Engineering, Inc. Calculations Aerodynamic Multiplier March 1999
IBA Consultants, lnc. 2381-264 TAS 112 01/08/08
3. LIMITATIONS:
3.1 Fire classification is not part of this acceptance.
3.2 For mortar or adhesive set tile applications, a static field uplift test in accordance with TAS
106 may required, refer to applicable building code.
3.3 Applicant shall retain the services of a Miami -Dade County Certified Laboratory to perform
quarterly test in accordance with TAS 112, appendix `A'. Such testing shall be submitted to
the Building and Neighborhood Compliance Department — Product Control Section for review.
3.4 Minimum underlayment shall be in compliance with the applicable Roofing Applications
Standards listed section 4.1 herein.
3.5 30/90 hot mopped underlayment applications may be installed perpendicular to the roof slope
unless stated otherwise by the underlayment material manufacturers published literature.
3.6 This acceptance is for wood deck applications. Minimum deck requirements shall be in
compliance with applicable building code.
NOA No. 11-0510.02
Expiration Date: 08/23/16
M44MI-DADE coUNTY Approval Date: 06/30/11
' " • t Page 3 of 6
4. INSTALLATION
4.1 Entegra Estate "S" Concrete Roof Tile and its components shall be installed in strict
compliance with Miami Dade County Roofing Application Standard RAS 118, RAS 119, and
RAS 120.
4.2 Data For Attachment Calculations.
Table 1: Average Weight (W) and Dimensions (I x w)
Tile Profile
Weight W (lbf)
Length-1(ft)
Width -w (ft)
Entegra Estate 'S' Roof Tile
10.Q
1.375
1.08
Table 2: Aerodynamic Multipliers - 2, (fe)
Tile x (f$) (ft )
Profile Batten Application Direct Deck Application_
Entegra Estate'S' Roof Tile 0.267 0.289
Table 3: Restoring Moments due to Gravity - Mg (ft-Ibf)
Tile
3":12"
4":j6":12"
Direct Deck
6":12"
Greater than
Profile
(min 15132" plywood)
(min. 19.13211 plywood)
7":12"
Profile
Entegra Estate
Battens Direct
BattensBattens
Direct
Battens Direct
Battens Direct
`S' Roof Tile
Deck
4.1
Deck
Deck
Deck
21.9
5.91 6.74
5.82
5.70 6.50
5.56 6.33
5.40 6.14
Table 4: Attachment Resistance Expressed as a Moment - Mf (ft-lbf)
for Nail -On Systems
Tile
Fastener Type
Direct Deck
Direct Deck
Battens
Profile
(min 15132" plywood)
(min. 19.13211 plywood)
Entegra
2-10d Ring Shank Nails
27.8
37.4
28.8
Estate 'S'
1-10d Smooth or Screw
8.8
11.8
4.1
Roof Tile
Shank Nail2
21.9
7.1
2-10d Smooth or Screw
16.4
Shank Nails
1 #8 Screw'
25.8
25.8
22.9
2 #8 Screw
47.1
47.1
49.1
1-10d Smooth or Screw
24.3
24.3
242
Shank Nail Field Cli 2
1-10d Smooth or Screw
19.0
19.0
22.1
Shank Nail Eave Clips
35.5
34.8
2-10d Smooth or Screw
35.5
Shank Nails Field Cii
31.9
32.2
2-10d Smooth or Screw
31.9
Shank Nails Eave Clip)
2-10d Ring Shank Nails 43.0 67.5 50.9
I Installation with a 4" the headlap. and fasteners are located a min. of 21/2" from head of tile.
2 When using only one fastener use the hole that is approximately 4-3/4" away from interlocking edge.
MIAMIMRE COUNTY
NOA No. 11-0510.02
Expiration Date: 08/23/16
Approval Date: 06/30/11
Page 4 of 6
Table 5: Attachment Resistance Expressed as a Moment Mf (ft-lbf)
for Two Patty Adhesive Set Systems
Tile
Profile
Tile Application
Minimum Attachment Resistance
Entegra Estate'S' Roof Tile
Adhesive
26.1
3 See manufactures component approval for installation requirements.
4 Flexible Products Company TileBond Average weight per patty 11.4 grams.
Polyfoam Product Inc, Average weight per patty 8 grams.
Table 6: Attachment Resistance Expressed as a Moment - Mf (ft-lbf)
for Single Patty Adhesive Set Systems
Tile Tile Application
Profile
Entegra Estate'S' Roof Tile Polyfbam PoiyProTM
Polyfoam Poi ProTM
Minimum Attachment
86.61
45.5
5 Lar a paddy placemen-t-kf-T54 ms of Po! ProT"".
6 Medium paddy placement R-24 grams of Pol ProT"'.
Table 7: Attachment Resistance Expressed as a Moment - Mf(ft-lbf)
for Mortar or Adhesive Set Systems
Tile
Tile Application
Minimum Attachment
Profile
Resistance
Entegra Estate
Mortar Set
20.60
'S' Roof Tile
5. LABELING
All tiles shall bear the imprint or identifiable marking of the manufacturer's name or logo (See
Detail Below), or following statement: "Miami -Dade County Product Control Approved".
OR
E N T E S R
ESTATE "S" TILE LABEL (LOCATED ON UNDERSIDE OF TILE)
6. BUILDING PERMIT REQUIREMENTS:
6.1 Application for building permit shall be accompanied by copies of the following:
6.1.1 This Notice of Acceptance.
6.1.2 Any other documents required by Building Official or Applicable building code in
order to properly evaluate the installation of this system.
NOA No. 11-0510.02
Expiration Date: 08/23116
MIAMW"A"DE COUN7Y Approval Date: 06/30/11
�iffsamqmvm Page 5 of 6
PROFILE DRAWING
Nail Holes---I-----�
ENTEGRA ESTATE "S" CUNCRETE ROOF TILE
END OF THIS ACCEPTANCE
NOA No. 11-0510.02
Expiration Date: 08/23/1.6
rtwMaoeGourm Approval Date: 06/30/11
"' Page 6 of 6
MIAM
MIAMI -DADS COUNTY
mma PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208
BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.eov/economy
Polyglass USA Inc.
150 Lyon Drive
Fernley, NV 89408
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is determined by Miami -Dade County Product Control Section that this product or material fails to meet the
requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Polyglass Polystick Underlayments
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed
by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then
it shall be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This revises NOA #11-1229.01 and consists of pages 1 through 8.
The submitted documentation was reviewed by Alex Tigera.
APPROVE
NOA No.: 12-0713.02
Expiration Date: 09/13/16
Approval Date: 02/14/13
Page 1 of 8
ROOFING COMPONENT APPROVAL
Category: Roofing
Sub -Category: Underlayment
Material: SBS , APP Self -Adhering Modified Bitumen
PRODUCTS DESCRIPTION:
Test Product
Product Dimensions Specification Description
Polystick MTS Roll: TAS 103 A homogeneous, rubberized asphalt
underlayment 6518" x 3'33/8" waterproofing membrane, glass fiber reinforced
Manufacturing Location 60 mils thick with polyolefinic film on the upper surface for
#2 use as an underlayment for metal roofing, roof
tile, slate tiles and shingle underlayment.
Polystick IR -Xe Roll: TAS 103 and A fine granular/sand top surface self -adhering,
underlayment 65' x 3'33/$" ASTM D 1970 APP polymer modified, fiberglass reinforced,
Manufacturing Location Or 65' x 3' bituminous sheet material for use as an
#1 & #2 60 mils thick underlayment in sloped roof assemblies.
Designed as an ice & rain shield and as a flat
roof tile underlayment.
Polystick TU Roll: TAS 103 and A heavy granuled surface self adhering, APP
underlayment 32'10" x 3'33/$" ASTM D 1970 polymer modified, fiberglass or polyester
Manufacturing Location 100 mils thick reinforced, bituminous sheet material for use as
#1 & #2 an underlayment in sloped roof assemblies.
Designed as a a roof tile underlayment.
Polystick TU Plus Roll: TAS 103 and A rubberized asphalt self -adhering, glass-
underlayment 65' x 3'33/$" ASTM D 1970 fiber/polyester reinforced waterproofing
(Surface Printing) 80 mils thick membrane. Designed as a metal roofing and roof
Manufacturing Location tile underlayment.
#1
Polystick TU P Roll: TAS 103 and A rubberized asphalt waterproofing membrane,
underlayment 32'10" x 3'33/8" ASTM D 1970 glass-fiber/polyester reinforced, with a granular
Manufacturing Location 130 mils thick surface designed for use as a tile roof
underlayment.
#2
Polystick Tile Pro Roll: TAS 103 and A rubberized asphalt self -adhering, glass -
Manufacturing Location 61' x 3'3_3/,,, ASTM D 1970 fiber/polyester reinforced waterproofing
#2 60 mils thick membrane. Designed as a metal roofing and roof
the underlayment.
Polystick Dual Pro Roll: TAS 103 and A rubberized asphalt self -adhering, glass -
Manufacturing Location 61' x 3'33/8" ASTM D 1970 fiber/polyester reinforced waterproofing
#2 60 mils thick membrane. Designed as a metal roofing and
roof tile underlayment.
NOA No.: 12-0713.02
Expiration Date: 09/13/16
Approval Date: 02/14/13
Page 2 of 8
t
PRODUCTS DESCRIPTION:
Test Product
Product Dimensions Specification Description
Polystick TU Max Roll: TAS 103 and A rubberized asphalt self -adhering, polyester
Manufacturing Location 65'8" x 3'3-3/8" ASTM D 1970 reinforced waterproofing membrane. Designed
#2 60 mils thick as a a roof the underlayment.
MANUFACTURING PLANTS:
1.Hazelton, PA
2.Winter Haven, FL
EVIDENCE SUBMITTED:
Test Agency
Test Identifier
Test Name/Report
Date
Exterior Research & Design, LLC
11756.04.01-1
TAS 103
04/27/01
11756.08.01-1
ASTM D 1970
08/14/01
02202.08.05
TAS 103
08/29/05
Trinity I ERD
P5110.08.07
TAS 103
08/29/07
P10870.09.08 -R1
TAS 103
12/04/08
P10870.04.09
TAS 103/ASTM D4798 & G155
04/13/09
P33360.06.10
ASTM D1970
07/01/10
P33370.03.11
TAS 103
03/02/11
P33370.04.11
ASTM D 1623
04/26/11
P36900.09.11
TAS 103/ASTM D4798 & G155
09/01/11
P37300.10.11
TAS 110/ASTM D4798 & D1970
10/19/11
P40390. 08.12-1
TAS 103 & TAS 110
08/06/12
P40390.08.12-2
ASTM D 1623
08/07/12
P40390.10.12
ASTM D 1970
10/03/12
PRI Asphalt Technologies
PRI01111
ASTM D 4977
04/08/02
PUSA-005-02-01
ASTM D 4977
01/31/02
PUSA-018-02-01
ASTM D 2523
07/14/03
PUSA-035-02-01
TAS 103
09/29/06
PUSA-033-02-01
ASTM D 1970
01/12/06
PUSA-055-02-02
TAS 103
12/10/07
PUSA-083-02-01
TAS 103
06/30/08
PUSA-089-02-01
TAS 103/ASTM D4798 & G155
07/06/09
Momentum Technologies, Inc.
JX201-17A
TAS 103/ASTM D4798 & G155
04/01/08
RX14E8A
TAS 103/ASTM D4798 & G155
11/09/09
DX23D813
TAS 103/ASTM D4798 & G155
02/18/10
DX23D8A
TAS 103/ASTM D4798 & G155
02/18/10
NOA No.: 12-0713.02
Expiration Date: 09/13/16
Approval Date: 02/14/13
Page 3 of 8
INSTALLATION PROCEDURES:
Deck Type 1: Wood, non -insulated
Base Sheet: One or more plies of ASTM D 226 Type II or ASTM D 2626.
Fastening: Per FBC 1518.2 & 1518.4 Nails and tin caps 12" grid, 6" o.c. at a minimum 4" head lap. (for
base sheet only)
Membrane: Polystick membranes self -adhered.
Surfacing: None
1. All nails in the deck shall be carefully checked for protruding heads. Re -fasten any loose decking panels,
and sweep the deck thoroughly to remove any dust and debris prior to application.
2. Place the underlayment over metal drip edge in accordance with RAS 111.
3. Place the first course of membrane parallel to the eave, rolling the membrane to obtain maximum contact.
Remove the release film as the membrane is applied. All side laps shall be a minimum of 3-'/z" and end
laps shall be a minimum of 6." Roll the membrane into place after removing the release strip. Vertical
strapping of the roof with Polystick is acceptable. Membrane shall be back nailed in accordance with
applicable building code.
4. When applying the membrane in the valley, start at the low point and work to the high point, rolling the
membrane from the center outward in both directions.
5. For ridge applications, center the membrane and roll from the center outward in both directions.
6. Roll or broom the entire membrane surface so as to have full contact with the surface, giving special
attention to lap areas.
7. Flash vent pipes, stacks, chimneys and penetrations in compliance with Roof Assembly current Product
Control Notice of Acceptance.
8. All protrusions or drains shall be initially taped with a 6" piece of underlayment. The flashing tape shall be
pressed in place and formed around the protrusion to ensure a tight fit. A second layer of Polystick shall be
applied over the underlayment.
NOA No.: 12-0713.02
Expiration Date: 09/13/16
Approval Date: 02/14/13
Page 4 of 8
GENERAL LIMITATIONS:
1. Fire classification is not part of this acceptance.
2. Polystick MTS, TU Plus, Tile Pro and Dual Pro may be used in asphaltic shingles, wood shakes and shingles,
non-structural metal roofing, roof tile systems and quarry slate roof assemblies. Polystick IR -Xe, TU, and TU
P may be used in all the previous assemblies listed except metal roofing. Polystick TU Max may be used in
roof tile systems only.
3. Deck requirements shall be in compliance with applicable building code.
4. Polyglass Polystick membranes shall be applied to a smooth, clean and dry surface. The deck shall be free of
irregularities.
5. Polyglass Polystick membranes and underlayments shall not be adhered directly over a pre-existing roof
membrane as a recover system.
6. Polyglass Polystick membranes shall not be left exposed as a temporary roof for longer than the amount of
days listed in the table below after application. Polyglass reserves the right to revise or alter product
exposure times; not to exceed the preceeding maximum time limitations.
Exposure Limit s
MTS IR -Xe TU TU Phis TU P Tile Pro Dual Pro TU Max
Winter Haven, FL. 180 180 180 180 180 180 180 90
Hazelton, PA. N/A 30 30 180 N/A N/A N/A N/A
7. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code
and Rule 9N-3 of the Florida Administrative Code.
8. In roof tile application, data for the attachment resistance of roof tiles shall be as set forth in the roof tile
manufacturer's Notice of Acceptance. Polystick TU, TU Plus, Tile Pro and TU Max may be used in both
adhesive set and mechanically fastened roof tile applications. Polystick IR -Xe, and Dual Pro are limited to
mechanically fastened roof tile applications. Polystick MTS is limited to mechanically fastened with battens
roof the applications. Polystick TU P may be used in both adhesive set and mechanically fastened roof the
applications with the exception of mortar set tile applications.
9. The maximum roof slope for use as roof tile underlayment for (direct -to -deck) ti assemblies shall be as
follows: (See Table Below) Z --
Tile Profile
Polystick MTS
Polystick IR -Xe
olystick TU, TU
Polystick TU
Plus, TU P, Tile
Max
Pro
Flat Tile
Prohibited without
5:12
No limitation
No limitation
battens
Profiled Tile
Prohibited without
Prohibited
No limitation
No limitation
battens
The above slope limitations can be exceeded only by using battens and counter battens in accordance with the
Approved Tile System Notice of Acceptance and applicable Florida Building Code requirements. Battens
are required for both loading and installation of tiles at all times.
NOA No.: 12-0713.02
MIAMMADe COutrrlr Expiration Date: 09/13/16
UUMSYNIApproval Date: 02/14/13
Page 5 of 8
GENERAL LIMITATIONS: (CONTINUED)
10. Care should be taken during the loading procedure to keep foot traffic to a minimum and to avoid dropping of
tile directly on the underlayment. Refer to Polyglass' Tile loading detail below for loading procedure for all
underlayments except Polystick MTS which shall be loaded onto battens.
d+
0
co
N
CO
11. Refer to prepared roofing system Product Control Notice of Acceptance for listed approval of this product
with specific prepared roofing products. Polystick MTS, IR -Xe, TU, TU Plus, TU P, TU Max, Dual Pro and
Tile Pro may be used with any approved roof covering Notice of Acceptance listing Polystick MTS, IR -Xe,
TU, TU Plus, TU P, TU Max, Dual Pro and Tile Pro as a component part of an assembly in the Notice of
Acceptance. If Polystick MTS, IR -Xe, TU, TU Plus, TU P, TU Max, Dual Pro and Tile Pro is not listed, a
request may be made to the Authority Having Jurisdiction (AHJ) or the Miami -Dade County Product Control
Department for approval provided that appropriate documentation is provided to detail compatibility of the
products, wind uplift resistance, and fire testing results.
LABELING:
1. All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or logo,
city and state of manufacturing facility and the following statement: "Miami -Dade County Product Control
Approved" or the Miami -Dade County Product Control Seal as shown below.
MAMI-DADE COUNTY
BUILDING PERMIT REQUIREMENTS:
Application for building permit shall be accompanied by copies of the following:
1. This Notice of Acceptance.
2. Any other documents required by the Building Official or applicable building code in order to properly evaluate
the installation of this materials.
NOA No.: 12-0713.02
Expiration Date: 09/13/16
Approval Date: 02/14/13
Page 6 of 8
POLYGLASS GENERAL APPLICATION GUIDELINES FOR POLYSTICK MEMBRANES:
1. Polyglass does accept the direct application of Polystick underlayment membranes to wood decks. Installers
are cautioned to refer to applicable local building codes prior to direct deck installation to ensure this is
acceptable. Please also refer to applicable Product Data Sheets of the corresponding products.
2. All rolls, with the exception of Polystick TU Plus should be back -nailed in selvage edge seam as per Polyglass
Back Nailing Guide. Nails shall be, 11 gauge ring shank type, applied with a minimum 1" metal disk as
required in Dade County or simplex type nail as otherwise allowable in other regions, at a minimum rate of
12" o.c. Polystick TU Plus should be back nailed in designated area marked "nail area, area para clavar" on
the face of membrane, with the above stated nails and/or disks. The head lap membrane is to cover the area
being back -nailed. (Please refer to applicable local building codes prior to installation.)
3. All seal lap seams (selvage laps) must be rolled with a hand roller to ensure full contact.
4. All fabric over fabric; and granule over granule end laps, shall have a 6" wide, uniform layer of Polyglass
Polyplus 55 Premium Modified Flashing Cement, Polyglass Polyplus 50 Premium MB Flashing Cement,
Polyglass PG500 MB Flashing Cement, applied in between the application of the lap. The use of mastic
between the laps does not apply to Polystick MTS.
5. A maximum of 6 tiles per stack are allowed when loading tile on the underlayments. Refer to the Polyglass
Tile Loading Guidelines. See General Limitations #9 and #10.
6. Battens and/or Counter -battens, as required by the the manufacturers NOA's, must be used on all projects for
pitch/slopes of 7/12" or greater. It is suggested that on pitch/slopes in excess of 6'/4"/12", precautions
should be taken, such as the use of battens to prevent tile sliding during the loading process.
7. Minimum cure time after membrane installation & before loading of roofing tiles is Forty -Eight (48) Hours.
8. Polystick membranes may not be used in any exposed application such as crickets, exposed valleys, or
exposed roof to wall details.
9. Repair of Polystick membranes is to be accomplished by applying Polyglass Polyplus 55 Premium Modified
Flashing Cement, Polyglass Polyplus 50 Premium MB Flashing Cement, Polyglass PG500 MB Flashing
Cement to the area in need of repair, followed by a patch of the Polystick material of like kind should be set
and hand rolled in place over the area needing such repair. Patching membrane shall be a minimum of 6
inches in either direction. The repair should be installed in such a way so that water will run parallel to or
over the top of all laps of the patch.
10. All self -adhered membranes must be rolled to ensure full contact with approved substrates. Polyglass
requires a minimum of 40 lbs for a weighted roller for the rolling of the field membrane. Hand rollers are
acceptable for rolling of patches or small areas of the roof. Brooming may be used where slope prohibits
rolling.
11. All approved substrates should be dry, clean and properly prepared, before any application of Polystick
membranes commences. An approved substrate technical bulletin can be furnished upon request. It is
recommended to refer to applicable building codes prior to installation to verify acceptable substrates.
12. The Polyglass Miami -Dade Notice of Acceptance (NOA) approval for Polystick membranes and
PolyProtector UDL can be furnished upon request by our Technical Services Department by calling 1 (800)
894-4563.
NOA No.: 12-0713.02
Expiration Date: 09/13/16
Approval Date: 02/14/13
Page 7 of 8
13. Questions in regards to the application of Polyglass products should be directed to our Technical Services
Department at 1 (800) 894-4563.
14. Polyglass recommends that applicators follow good roofing practices and applicable procedures as outlined
by the National Roofing Contractors Association (NRCA).
PLEASE CHECK WITH LOCAL BUILDING CODES REGARDING LIMITATIONS OF SPECIFIC
APPLICATIONS. LOCAL CODES MAY SUPERSEDE POLYGLASS REQUIREMENTS AND
RECOMMENDATIONS.
END OF THIS ACCEPTANCE
NOA No.: 12-0713.02
Expiration Date: 09/13/16
Approval Date: 02/14/13
Page 8 of 8