RF-14-805Inspection Worksheet
Miami Shores Village
10050 N.E. 2nd Avenue Miami Shores, FL
Phone: (305)795 -2204 Fax: (305)756 -8972
Inspection Number: INSP- 212539
Scheduled Inspection Date: May 19, 2014
Inspector: Rodriguez, Jorge
Owner: VERONICA TIRADO, VICTOR SANCHEZ
Job Address: 435 NE 101 Street
Miami Shores, FL
Project: <NONE>
Contractor: ISAACS ROOFING & INSULATION CORP
Building Department Comments
Permit Number: RF -4 -14 -805
Permit Type: Roof
Inspection Type: Final Roof
Work Classification: Flat
Phone Number (305)989 -5638
Parcel Number 1132060170650
Phone: (305)234 -5234
RE- ROOF FLAT TO FLAT Infractio Passed Comments
INSPECTOR COMMENTS False
Inspector Comments
Passed CREATED AS REINSPECTION FOR INSP - 212447. CREATED AS
REINSPECTION FOR INSP- 211135. Gate locked/ no permit
No weep holes on east end
Failed
Correction ❑
Needed
Re- Inspection ❑
Fee
No Additional Inspections can be scheduled until
re- inspection fee is paid.
May 16, 2014 For Inspections please call: (305)762 -4949 Page 25 of 35
RE: Permit If -�7 , � I a(
MiamiShores Village
Building Department
10050 N.E.2nd Avenue
Miami Shores, Florida 33138
Tel: (305) 795.2204
Fax: (305) 756.8972
INSPECTION AFFIDAVIT
DATE: _ 'S • i
Miami Shores Village �t
1 ,L� Building Department APR 21 2014
v
10050 N.E.2nd Avenue, Miami Shores, Florida 33138 BY:
1 ,I Tel: (305) 795.2204 Fax: (305) 756.8972
V 1 INSPECTION'S PHONE NUMBER: (305) 762.4949
BUILDING
PERMIT APPLICATION
Permit Type: BUILDING
FBC 20
Permit No. /
Master Permit No.
1I_ N
JOB ADDRESS: Y35 A/E / CUl S t—
City: Miami Shores County: Miami Dade Zip: -33 ( 3 3
Folio/Parcel #:
Is the Building Historically Designated: Yes
NO ��' Flood Zone:
OWNER: Name (Fee Simple Titleholder): a i c fv r .! ° 5, yic 4 ee Phone#: 79C Sa ,� 6 �d
Address: e4 3 5 /SE / 61 5
City: /V( (a V?
Tenant/Lessee Name: _
Email: v I r -(t V
CONTRACTOR: Company Name: _
Address: tl-221S IS-
City: IF
Qualifier Name:
State: FZ zip: °3 3 (3S
. C
`State:
o Phnne#-
State Certification or Registration #: CX- C- A3Z55 (0 Certificate of Competency #:
Contact Phone#: I bW " 2 ')l I9'),5C* Email Address:
DESIGNER: Architect/Engineer: Phonek
Value of Work for this Permit: $ Square/Linear Footage of Work:
Type of Work: ❑Addition ❑Alteration ❑New PR<air/Replace ❑Demolition
Description of Work:4 - �'�� •� °d"7
Color thru tile:
Submittal Fee $ Permit Fee $
Scanning Fee $
Radon Fee $
Notary $ Training/Education Fee $
Double Fee $ Structural Review $
CCF $ CO /CC $
DBPR $ Bond $
Technology Fee $
TOTAL FEE NOW DUE $
Bonding Company's Name (if applicable)
Bonding Company's Address
City
State
Mortgage Lender's Name (if applicable)
Mortgage Lender's Address
City
State
Zip
Zip
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING, SIGNS,
WELLS, POOLS, FURNACES, BOILERS, HEATERS, TANKS and AIR CONDITIONERS, ETC.....
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF
COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR
IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN
FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE
RECORDING YOUR NOTICE OF COMMENCEMENT."
Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subject to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site
for the first inspection which occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the
inspection will not be approved and a reinspection fee will be charged
Signature Signature
Owner or Agent
The foregoing instrument was acknowledged before me this
day of A�r`� , 20 �9, bye Vl (� A.J.- (�c j
who i rsonally known to me or,9who has produced
As identification and who did take an oath.
NOTARY
Commission Expires:
APPROVED BY
Contractor
The foregoing instrument was acknowledged before me thi�.
day of , 20&, by dqIQI: .
who is personally known to me or who has produced
kas identification and who did take an oath.
Noun Pdft
U1 0M. E gp-n, X011
C aiIFFiW"
Plans Examiner
Structural Review
(Revised 3 /12/2012)(Revised 07 /10 /07)(Revised 06 /10/2009)(Revised 3/15/09)
NOTARY PUBLIC:
,Sign:
.,.w.
magna M Feli ano
Zoning
Clerk
From: 04/21/2014 12:18 #236 P.001 /002
A ° CERTIFICATE OF LIABILITY INSURANCE °oils o1° 4
THIS CERTIFICATE 18 ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS
CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES
BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S). AUTHORIZED
REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER.
IMPORTANT: N the certificate holler Is an ADDITIONAL INSURED, the poiicy(ies) must be endorsed. If SUBROGATION IS WAIVED, subject to
the terms and conditions of the Policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the
certificate holder in Itau of such andersamAntial-
PRODUCER
Bouchard Insuranoe for WBS
P.O.Box 6090
Clearwater, FL 33758 -6090
40142
INSURED
Workforce Business Services, Inc AIL Emp: Isaacs Roofing & Insulation
Corporation
1401 Manatee Ave. West Ste 600
Bradenton, FL 34205 -8708
COVERAGES CERTIFICATE NUMBERt 131=1 r199S1; ,27R Or- "Qrnru sun rucoo.
THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POUCY PERIOD
INDICATED. NOTWITHSTANDING ANY REQUIREMENT. TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS
CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS,
EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS.
rx
TYPE OF INSURANCE
P Y NUMBER
EFF
LIMITS
GENERAL
LIA13ILnY
EACH OCCURRENCE
$
PREMI TO RENTED
$
COMMERCIAL GENERAL LIABILITY
CLAIMS4IMDE [_] OCCUR
MED EXP arts son
$
PERSONAL & ADV INJURY
$
GENERALAGGREGATE
$
GEML AGGREGATE LIMIT APPLIES PER:
POLICY P� LOC
PRODUCTS • COMPIOP AGG
$
$
AUTOMOBILE
LIABILITY
ANYAUTO
ALL ZVOESDULED
AUTO I ON4 WNED
HIRED AUTOS AUTOS
E
BODILYWJURY(Perperow)
$
H
BODILY INJURY (Per 8001deM)
$
PROPERTY D
$
$
UMBRELLA I"
EXCESS LIAR
HCL4IMS-MADE
OCCUR
EACH OCCURRENCE
S
AGGREGATE
$
DED
WORMI COMPENSATION
AND EMPLOYERS'UABLFTY
ANY PROPRIETOR/PARTNERIEXECUTNE YIN
OFMCERIMEMBER �
(Mandatory m and
OPERATION belwr
X I VAC STA
$
A
MIA
WC 90-00.818 -03
12/31/2013
12/31/2014
E.L EACH ACCIDENT
$ 1,QOO,000
E.L. DISEASE - EA EMPLOYEE
$ 1,000,000
EL DISEASE - POLICY LIMIT
$ 11000,000
]MM.
Location Coverage Period:
12/3112013
1031/2014
CllenW 053904
DESCRIPTION OF OPBRATIONS I LOCATIONS I VEHICLES (Anaeh ACORD 101. AddWonal Remarks Schedule, H more spans Is requhmM
Covemoe proms Isaacs Roofing & Insulation Corporation
orny those em 17225 S Dixie Hwy Suke 200
wed tD but not Palmetto Bay, FL 33157
subcontractors of.
Endorsements: Waiver of Subrogation
Mee- rrcu+Ax L2^1 ..mob
Miami Shores Village
10050 NE 2nd Ave
Miami Shores, FL 33138
SHOULD ANY OF THE ABOVE DESCRIBED POLICIES Be CANCELLED BEFORE
THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN
ACCORDANCE WITH THE POLICY PROVISIONS.
AUTHORIZED REPRESENTATWE
O ACORD CORPORATION. All rights resorvad
r%vvrcra 40 tzuTarvo) The ACORD name and logo are registered marks of ACORD
From:
04/21/2014 12:19 #236 P.002/002
WORKERS' COMPENSATION AND EMPLOYERS' LIABILITY INSURANCE POLICY WC 00 0313
(Ed. 4-84)
WAIVER OF OUR RIGHT TO RECOVER FROM OTHERS ENDORSEMENT
We have the right to recover our payments from anyone liable for an injury covered by this policy. We will not
enforce our right against the person or organization named In the Schedule. (This agreement applies only to the
extent that you perform work under a written contract that requires you to obtain this agreement from us.)
This agreement shall not operate directly or indirectly to benefit anyone not named in the Schedule.
IN FAVOR OF:
Miami Shores Village
10050 NE 2nd Ave
Miami Shores, FL 33138
Schedule
WORK PERFORMED BY LEASED EMPLOYEES OF:
Isaacs Roofing & Insulation Corporation
17225 S. Dixie Hwy Suite 200
Palmetto Bay, FL 33157
ON THE FOLLOWING PROJECT:
FEE FOR THIS WAIVER IS:
Premium will be waived
This endorsement changes the policy to which it is attached and Is effective on the date issued unless otherwise stated.
(The Information below Is required only when this endorsement is issued subsequent to preparation of the policy.)
Endorsement Effective: 12/31/2013
Policy No: we tro- oo- sls-o3
Insured: Workforce Business Services, Inc Alt, Emp: Isaacs Roofing & Insulation Corporation
Insurance Company. American Zurich Insurance Company Countersigned By:
Endorsement No:
Premium: $
Authorized Representative
WC 124 (4-84)
WC 00 0313 Copyright 1983 National Council on Compensation Insurance, Page 1
Section A
.r
MIAMI Miami -Dade County Building Department Electronic Application
® High Velocity Hurricane Zone Roofing Permit Application Form
"Delivering Excellence Every Day"
Section A (General Information) -
Master Permit No: Process No: App Z 12014
Contractor's Name: I Isaacs Roofing
Job Address: [435 NE 101; St.
Roof Category
❑✓ Low Slope ❑ Mechanically Fastened Tile ❑ Mortar /Adhesive Set Tile
El Asphaltic Shingles ❑ Metal Panel /Shingles ❑ Wood Shingles /Shakes
El Sprayed Polyurethane Foam ❑ Other.
Roof Type
❑ New Roof 2 Re- Roofing ❑ Recovering ❑ Repair ❑ Maintenance
Are there Gas Vent Stacks located on the roof? ❑ Yes ❑ No If yes, what type? ❑ Natural ❑ LPGX
Roof System Information
Low slope roof area (ft.2) 1200 Steep Sloped area ft. ____ Total (U) 1200
Section B
Sketch Roof Plan: Illustrate all levels and sections, roof drains, scuppers, overflow scuppers and overflow drains. Include
dimensions of sections and levels, clearly identify dimensions of elevated pressure zones and location of parapets.
Perimeter Width (a'): Corner Size (a' x a'):
F07
se
c
ti� O
�v
1
Al
4
V� �O
O 0
Ja ��
Section C
MlAMt• Miami -Dade County Building & Neighborhood Compliance Department
® HVHZ Electronic Roof Permit Form
NCle/ivering Farce /lance Fvery Day" Section C page (Low Slope Roof Systems)
Fill In the specffic roof assembly components. ff a component is not required, insert not applicable (n/a) In the text box.
S
ROOF SYSTEM MANUFACTURER: Pol Yga ss Top Ply: .
FR
Product Approval (NOA): 13- 0514.10 System T E (1) p Pl F SA P
�� Top Ply Fastening /Bonding Material:
..........
Wind Uplift Pressures, From RAS 128 or Sealed Calculations: Self- Adhered
(P1) Field: 142.8 psf Surfacing: Na
(P2) Perimeters: 71 •? psf
(P3) Comers: 1108 1 psf
Maximum Design Pressure From NOA: 52 -8 psf
Roof Slope: 1/8 " : 12 Roof Mean Height: 20 ft.
Parapet Walls: [Z]No 1:1 Yes Parapet wall Height: 4" ft.
Deck Type: 1 -1" x 6" T & G—
Support Spacing: Na " o/c
Alternate Deck Type: Na
Existing Roof:
Na
Fire Barrier:
Na
Vapor Barrier:
Na
Anchor Sheet:
75# & Elastobase
Anchor Sheet Fastener / Bonding Material:
1 1/4" ring shank nails
Insulation Base Layer Size & Thickness:
In/a
Insulation Base Layer Fastener/ Bonding Material:
Na
Insulation Top Layer Size & Thickness:
Na
Insulation Top Layer Fastener / Bonding Material:
Na _
Base Sheet(s) & No. of Ply(s):
1- Elastoflex SA V FIR
Base Sheet Fastener / Bonding Material:
Self- Adhered
Ply Sheet(s) & No. of Ply(s):
Na
Ply Sheet Fastener / Bonding Material:
n/a
SINGLE PLY MEMBRANE:
Single Ply Manufacturer / Type:
n/a
Single Ply Sheet Width: " 1/2 Sheet Width: "
No. of Single Ply 1/2 sheets:
Single Ply Membrane Fastening / Bonding Material:
Na
0 FASTENER SPACING FOR BASESHEET ATTACHMENT
❑ SINGLE PLY MEMBRANE ATTACHMENT
1. Field: ILJ " o1c @ Laps & El rows 8 " o/c
2. Perimeter: 6 " o/c @ Laps & r 4 rows '6 " o%
3. Comer. 4 " o/c @ Laps &[U rows 4 " oic
NUMBER OF FASTENERS PER INSULATION BOARD:
1. Field: 2. Perimeter.
Li
3. Comer.
Insulation Fastener Type:
Na
WOOD NAILER TYPE AND SIZE:
Na-
Wood Nailer Fastener Type and Spacing:
Na
n/a
Section C2
MIAMI- ADE Miami -Dade County Building & Neighborhood Compliance Department
omflij
HVHZ Electronic Roof Permit Form
"Delivering Excellence Every Day"
Illustrate Components Noted and Details as Applicable:
Woodblocking, Gutter, Edge Terminations /Stripping /Flashing, Continuous Cleat, Cant Strip, Base
Flashing, Counterflashing, Coping, Etc.
Indicate: Mean Roof Height, Parapet Height, Height of Base Flashing, Component Material, Material
Thickness, Fastener Type, Fastener Spacing
Or: Submit Manufacturers Details that Comply with RAS -111 and Chapter 15 HVHZ, FBC.
jPolyt lex SA P
IElastobase I
T- Bar & Stucco
stop
file: / / /Cl/ Documents %20and %20Settings / sky / Desktop/ rooflo20permit %20forms/Section %20C2d.htn9 /5/2007 7:18:20 AM
Owner's Notification Form HVHZ 2010
MIAM
o
"Delivering Excellence Every Day' SECTION 1524
HIGH VELOCITY HURRICANE ZONES — REQUIRED OWNERS NOTIFICATION FOR ROOFING CONSIDERATIONS
1524.1 Scope. As it pertains to this section, it is the responsibility of the roofing contractor to provide the owner
with the required roofing permit, and to explain to the owner the content of this section. The provisions of
Chapter 15 of the Florida Building Code, Building govern the minimum requirements and standards of the
industry for roofing system installations. Additionally, the following items should be addressed as part of the
agreement between the owner and the contractor. The owner's initial in the designated space indicates that the
item has been explained.
L. Aesthetics - workmanship: The workmanship provisions of Chapter 15 (High Velocity Hurricane
Zone) are for the purpose of providing that the roofing system meets the wind resistance and water intrusion
performance standards. Aesthetics (appearance) are not a consideration with respect to workmanship provisions.
Aesthetic issues such as color or architectural appearance, that are not part of a zoning code, should be addressed
as part of a agreement between the owner and the contractor.
2. Renailing wood decks: When replacing roofing, the existing wood roof deck may have to be
renailed in accordance with the current provisions of Chapter 16 (High Velocity Hurricane Zones) of the Florida
Building Code. (The roof deck is usually concealed prior to removing the existing roof system).
. Common roofs: Common roofs are those which have no visible delineation between neighboring
units (i.e. townhouses, condominiums, etc.). In buildings with common roofs, the roofing contractor and/or
owner should notify the occupants of adjacent units of roofing work to be performed.
xposed ceilings: Exposed, open beam ceilings are where the underside of the roof decking can be
viewed from below. The owner may wish to maintain the architectural appearance; therefore, roofing nail
penetrations of the underside of the decking may not be acceptable. The owner provides the option of
maintaining this appearance.
G onding water: The current roof system and/or deck of the building may not drain well and may
cause water to pond (accumulate) in low -lying areas of the roof. Ponding can be an indication of structural
distress and may require the review of a professional structural engineer. Ponding may shorten the life
expectancy and performance of the new roofing system. Ponding conditions may not be evident until the original
roofing s stem is removed. Ponding conditions should be corrected.
6.Overflow scuppers (wall outlets): It is required that rainwater flow off so that the roof is not
overloaded from a build up of water. Perimeter /edge walls or other roof extensions may block this discharge if
overflow scuppers (wall outlets) are not provided. It may be necessary to install overflow scuppers in accordance
with the requirements of. Chapter 15 and 16 herein and the Florida Building Code, Plumbing.
C4 . Ventilation: Most roof structures should have some ability to vent natural airflow through the
interior of the structural assembly (the building itself). The existing amount of attic ventilation shall not be
reduced. Exception: Attic spaces, designed by a Florida- licensed engineer or registered architect to eliminate
the attic venting, venting shall not be required.
Owner's /Agent's Signature:
Contractor's Signature:
Property Address:
/
Date: /
�--- Permit Number:
Polyglass USA, Inc.
150 Lyon Drive
Fernley, NV 89408
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is determined by Miami -Dade County Product Control Section that this product or material falls to meet the
requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Polyglass Self- Adhered Roof System over Wood Decks
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved ", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This renews NOA# 12- 0818.07 and consists of pages 1 through 26.
The submitted documentation was reviewed by Alex Tigera.
NOA No.: 13- 0514.10
Expiration Date: 10/11/17
Approval Date: 09/26/13
Page 1 of 26
KIM
MIAMI -DADE COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
11805 SW 26 Street, Room 208
BOARD AND CODE ADMINISTRATION DIVISION
Miami, Florida 33175 -2474
T (786) 315 -2590 F (786) 315 -2599
NOTICE OF ACCEPTANCE (NOA)
www.miamidade.eov /eeonomv
Polyglass USA, Inc.
150 Lyon Drive
Fernley, NV 89408
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is determined by Miami -Dade County Product Control Section that this product or material falls to meet the
requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Polyglass Self- Adhered Roof System over Wood Decks
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved ", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This renews NOA# 12- 0818.07 and consists of pages 1 through 26.
The submitted documentation was reviewed by Alex Tigera.
NOA No.: 13- 0514.10
Expiration Date: 10/11/17
Approval Date: 09/26/13
Page 1 of 26
ROOFING ASSEMBLY APPROVAL
Category' Roofing
Sub - Category: Modified Bitumen
Materials SBS /APP/TPO
Deck Type: Wood
Maximum Design Pressure -112.5 psf
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT:
TABLE 1
Test Product
Product Dimensions Specification Description
Elastobase 65' 2" x 3' 3 -3/8" ASTM D 6163, SBS modified asphalt coated fiberglass reinforced
Type I base sheet.
Elastobase P
Elastoflex SA V FR
(1.5 -mm)
Elastoflex SA V
PLUS FR
Elastoflex SA V (1.5-
mm)
Elastoflex SA V
PLUS
Elastoflex SA P FR
Elastoflex SA P
Polyflex SA P
Polyflex SA P FR
5' 2" x 3' 3 -3/8"
32' 6" x 3' 3 -3/8"
32' 6" x 3' 3 -3/8"
32' 6" x 3' 3 3/8"
32' 6" x 3' 33/8"
32' 6" x 3' 3 -3/8"
32'6" x 3'3-3/8"
32' 6" x 3' 33/8"
32' 6" x 3' 33/8"
Polyfresko SBS SAP 32' 6" x 3' 33/8"
ASTM D 6164,
SBS modified asphalt coated polyester reinforced base
Type I
sheet.
ASTM D 6163,
Self - adhered, fiberglass reinforced, SBS modified
Type I
bitumen membrane with a self - adhering back face and
a smooth top surface.
ASTM D 6163,
Self- adhered, fiberglass reinforced, SBS modified
Type I
bitumen membrane with a self - adhering back face and
a smooth top surface.
ASTM D 6163,
Self- adhered, fiberglass reinforced, SBS modified
Type I
bitumen membrane with a self - adhering back face and
a smooth top surface.
ASTM D 6163,
Self- adhered, fiberglass reinforced, SBS modified
Type I
bitumen membrane with a self- adhering back face and
a smooth top surface.
ASTM D 6164,
Self- adhered, polyester reinforced, SBS modified
Type I
bitumen membrane with a self - adhering back face and
a granule top surface.
ASTM D 6164,
Self- adhered, fiberglass reinforced, SBS modified
Type I
bitumen membrane with a self - adhering back face and
a granule top surface.
ASTM D 6222,
Self- adhered, polyester reinforced, APP modified
Type I
bitumen membrane with a self - adhering back face and
a granule'top surface.
ASTM D 6222,
Self - adhered, polyester reinforced, APP modified
Type I
bitumen membrane with a self - adhering back face and
a granule top surface.
ASTM D 6164,
Self- adhered, fiberglass reinforced, SBS modified
Type I
bitumen membrane with a self - adhering back face and
a granule top surface.
NOA No.: 13- 0514.10
Expiration Date: 10/11/17
Approval Date: 09/26/13
Page 2 of 26
Polyfresko SBS SAP
32' 6" x 3' 33/89'
ASTM D 6164,
Self - adhered, fiberglass reinforced, SBS modified
FR
with modified bitumen membranes.
Type I
bitumen membrane with a self - adhering back face and
A fibered rubberized adhesive designed for use with
tube
Type III
a granule top surface.
Polyfresko APP SAP
32' 6" x 3' 3-3/891
ASTM D 6222,
Self - adhered, polyester reinforced, APP modified
Type I
bitumen membrane with a self - adhering back face and
A thick, fibered, rubberized flashing cement for use
tube
a granule top surface.
Polyfresko APP SAP
32' 6" x 3' 33 /s"
ASTM D 6222,
Self - adhered, polyester reinforced, APP modified
FR
adhesive.
Type I
bitumen membrane with a self - adhering back face and
a granule top surface
PolyKool
32' 10" x 3' 33/8"
ASTM D6222
Self- adhered, polyester reinforced, APP modified
Type I
bitumen membrane with a self - adhering back face and
a white film laminate on the top surface.
PG325 Cold Process 1, 3, 5, 50, 55 gal. or ASTM D3019
Adhesive tube Type III
PG100 Asphalt Primer 1, 3, 5, 50, 55 gal,
tube or 17 oz. spray
can
PG350 Mod Bit 1, 3, 5, 50, 55 gal. or
Adhesive tube
PG400 Plastic Roof 1, 3, 5, 50, 55 gal. or
Cement tube
PG425 Wet/Dry Roof
Cement
PG450 Flashing
Cement
PG500 MB Flashing
Cement
Polyplus 35 Premium
Mod Bit Adhesive
Polyplus 45 Premium
Flashing Cement
Polyplus 50 Premium
MB Flashing Cement
Polyplus 55 Premium
Modified Flashing
Cement
ASTM D41
ASTM D3019
Type III
ASTM D4586
ASTM D3409
1, 3, 5, 50, 55 gal. or ASTM D4586
tube ASTM D3409
1, 3, 5, 50, 55 gal. or ASTM D4586
tube
A fibered cold process adhesive for use with roll or
BUR roofing.
A penetrating solution of solvent and a blend of
selected asphalts used to promote adhesion.
A fibered rubberized adhesive designed for use with
modified bitumen membranes.
A thick, fibered, rubberized flashing cement for use in
dry or damp conditions.
A thick, fibered, rubberized flashing cement for use in
dry or damp conditions.
A thick, fibered, rubberized flashing cement.
1, 3, 5, 50, 55 gal. or
ASTM D4586
A thick, fibered, rubberized flashing cement for use
tube
with modified bitumen membranes.
1, 3, 5, 50, 55 gal. or
ASTM D3019
A fibered rubberized adhesive designed for use with
tube
Type III
modified bitumen membranes.
1, 3, 5, 50, 55 gal. or
ASTM D4586
A thick, fibered, rubberized flashing cement.
tube
1, 3, 5, 50, 55 gal. or
ASTM D4586
A thick, fibered, rubberized flashing cement for use
tube
with modified bitumen membranes.
1, 3, 5, 50, 55 gal. or
ASTM D4586
A mastic compound for use as a roof flashing
tube
adhesive.
NOA No.: 13- 0514,10
Expiration Date: 10/11/17
Approval Date: 09/26/13
Page 3 of 26
APPROVED INSULATIONS:
TABLE 2
Product Name
Product Description
Manufacturer
(With Current NOA)
Polytherm-H
Polyisocyanurate foam insulation
Polyglass USA, Inc.
Polytherm
Polyisocyanurate foam insulation
Polyglass USA, Inc.
Polytherm Composite
Polyisocyanurate /perlite composite insulation.
Polyglass USA, Inc.
ACFoam -II
Polyisocyanurate foam insulation
Atlas Roofing Corp
ACFoam -III
Polyisocyanurate foam insulation
Atlas Roofing Corp
High Density Wood Fiberboard
Wood fiber insulation board
Generic
Perlite Insulation
Perlite insulation board
Generic
Type X Gypsum
Fire resistant rated gypsum.
Generic
DensDeck, DensDeck Prime
Gypsum insulation board
Georgia - Pacific
H- Shield
Polyisocyanurate foam insulation
Hunter Panels, LLC
H- Shield CG
Polyisocyanurate /perlite composite insulation
Hunter Panels, LLC
ENRGY -3, JM ISO 3
Polyisocyanurate foam insulation
Johns Manville Corp.
Fesco Board
Expanded mineral fiber
Johns Manville Corp.
Multi -Max FA -3
Polyisocyanurate foam insulation
Rmax Operating, LLC.
SECUROCK Gypsum -Fiber Roof Board
Fiber reinforced coverboard
United States Gypsum
Corporation
NOA No.: 13- 0514.10
Expiration Date: 10/11/17
Approval Date: 09/26/13
Page 4 of 26
APPROVED FASTENERS:
Manufacturer
Dimensions (With Current NOA)
SFS Intec, Inc.
2 7/8" x SFS Intec, Inc.
3 1/4"
3" x 3 1/4" SFS Intec, Inc.
Various
OMG, Inc.
TABLE 3
Fastener
Product
Product
Number
Name
Description
1.
Dekfast Fasteners #12, #14
Insulation fastener for wood,
3" round
& #15 HS
steel and concrete decks
2.
Dekfast Galvalume Steel
Galvalume hex stress plate.
3 1/4"
Hex Plate
3" round
3.
Dekfast Dekflat Round
Polypropylene locking
Plastic Lock Plate
plate.
4.
#12 & #14 Roofgrip
Insulation and membrane
fastener
5.
Flat Bottom Metal Plate
A2 -SS aluminized steel plate
6.
Plastic Plate
Polyethylene stress plate
7.
Tru -Fast #14 HD Fastener
Insulation fastener for steel and
wood decks
8.
Tru -Fast 3" Metal Insulation
Round Galvalume AZ50 steel
Plate
plate
9.
Polygrip Fasteners #12, #14
Insulation fastener for wood,
& #15
steel and concrete decks
10.
Polygrip Hex Plates
Galvalume hex stress plate.
11.
Dekfast Galvalume Steel 3
3" round galvalume AZ50 steel
in. Round
plate
12.
Millennium One- StepTm
Insulation Adhesive
Foamable Adhesive
Manufacturer
Dimensions (With Current NOA)
SFS Intec, Inc.
2 7/8" x SFS Intec, Inc.
3 1/4"
3" x 3 1/4" SFS Intec, Inc.
Various
OMG, Inc.
3" square
OMG, Inc.
3.2" round
OMG, Inc.
Altenloh, Brinck & Co.
U.S., Inc.
3.23 round
Altenloh, Brinck & Co.
3" round
U.S., Inc.
Various
Polyglass USA, Inc
2'/8" x
Polyglass USA, Inc
3 1/4"
3" round
SFS Intec, Inc.
Various
Adco Products
NOA No.: 13- 0514.10
Expiration Date: 10/11/17
Approval Date: 09/26/13
Page 5 of 26
APPROVED SURFACING:
TABLE 4
Product Product
Name Description
PG200 Non - Fibered Roof Coating A non fibered asphaltic coating used
to add life and rejuvenate existing
BUR roofing substrates.
PG300 Fibered Roof Coating An asphalt cutback fibered roof
coating. May be applied by brush or
spray equipment to rejuvenate aged
BUR
PG600 Non - Fibered Aluminum Non - fibered aluminum roof coating.
Roof Coating
PG650 Fibered Aluminum Roof
Coating
PG700 White Elastomeric Roof
Coating
Fibered aluminum roof coating.
Application
Rate
1'/2 -2 gaUsq
1'/2 -2 gaUsq
'/2 -1 gaUsq
1'/2 -2 gaUsq
A premium white eastomeric acrylic 1 -1' /2 gaUsq
based roof coating (water- based). A
polyester fabric may be used for
reinforcement with this coating.
PG800 Non - Fibered Asphalt An asphalt base, un- fibered clay
Emulsion Roof Coating
emulsion
PG850 Fibered Asphalt Emulsion
An asphalt base, fibered clay
Roof Coating
emulsion
Polyplus 65 Premium Fibered
Fibered aluminum roof coating.
Aluminum Roof Coating
Polyglass
Polyplus 60 Premium Non-
Non - fibered aluminum roof coating.
Fibered Aluminum Roof Coating
ASTM D2824
Polybrite 70 White Elastomeric
Roof Coating
Gravel
Slag
A premium white eastomeric acrylic
based roof coating (water- based). A
polyester fabric may be used for
reinforcement with this coating.
To be installed in a flood coat of
approved asphalt at 60 lbs /sq
To be installed in a flood coat of
approved asphalt at 60 lbs /sq
Specification Manufactur
er
TAS 140 Polyglass
USA, Inc.
ASTM D4479 Polyglass
USA, Inc.
ASTM D2824
Polyglass
Type I
USA, Inc.
ASTM D2824
Polyglass
Type III
USA, Inc.
ASTM D6083
Polyglass
USA, Inc.
3 gaUsq in
ASTM D1227
Polyglass
two coats
USA, Inc.
3 gaUsq in
ASTM D1227
Polyglass
two coats
USA, Inc.
1'/2 -2 gaUsq
ASTM D2824
Polyglass
Type III
USA, Inc.
'/2 -1 gaUsq
ASTM D2824
Polyglass
Type I
USA, Inc.
1 -1'/2 gaUsq ASTM D6083 Polyglass
USA, Inc.
4001bs /sq N/A Generic
300lbs /sq N/A Generic
NOA No.: 13- 0514.10
Expiration Date: 10/11/17
Approval Date: 09/26/13
Page 6 of 26
EVIDENCE SUBMITTED:
Test Agencv
Test Name/Renort
Report No.
Date
Factory Mutual Research
4470
J.I.2W7A7.AM
08.04.94
Corporation
4450
2D5A9.AM
06.22.99
4470
J.I.3001334
02.15.00
4470
J.I.3000857
01.12.00
4470
J.I.3004091
01.12.00
4470
3012321
07.29.07
4450
3014751
08.27.03
4450
3019317
06.30.04
4470
3014692
08.05.03
Trinity ERD
TAS 114
11752.09.99 -1
02.08.00
TAS 114
02764.09.05
09.09.05
TAS 114
020843.02.05 -1
02.10.05
TAS 114
02762.03.05
03.30.05
TAS 117(B) -ASTM D903
020841.06.04
06.02.04
TAS 114
P1734.07.06 -R1
02.27.07
TAS 114
02843.07.07
07.23.07
TAS 114
P1738.02.07
02.05.07
TAS 114
P1739.01.07
01.23.07
TAS 117(B) -ASTM D6862
C8500SC.11.07
11.30.07
ASTM D6164 / ASTM D6222
P10490.08.08
08.13.08
ASTM D6164 / ASTM D6222
P10490.10.08 -R1
10.03.08
ASTM D6222
P7400.03.08 -R2
10/09/08
TAS 114(D) —ASTM D1876
P10070.10.08
10/09/08
ASTM D6222
P10490.10.08 -2
10/30/08
FM 4470 & TAS 114
P33970.03.11
03/15/11
ASTM D6163 / ASTM D 4601
P33960.03.11
03/15/11
ASTM D6164
P37590.07.13 -1
07/02/13
ASTM D6164
P37590.03.13 -3A
03/06/13
ASTM D6163
P37590.03.13 -2 -R1
02/05/13
ASTM D6222
P37590.09.13
0912/13
PRI Asphalt Technologies
ASTM D6222
PUSA- 061 -02 -02
01/28/08
ASTM D6222
PUSA- 062 -02 -02
12/04/08
ASTM D6163
PUSA- 064 -02 -02
02/27/08
NOA No.: 13- 0514.10
Expiration Date: 10/11/17
Approval Date: 09/26/13
Page 7 of 26
Membrane Type: SBS /APP
Deck Type 1: Wood, Non - Insulated
Deck Description: 19/32' or greater plywood or wood plank.
System Type E(1): Base sheet is mechanically attached to roof deck.
All General and System Limitations apply.
Base Sheet: One ply of Elastobase or Elastobase P fastened to the deck as described below:
Fastening #1: Attach base sheet using 11 ga. annular ring shank and 1 -5/8" diameter tin caps spaced 8" o.c. in
a 4" lap and 8" o.c. in three equally spaced staggered rows in the center of the sheet.
Fastening #2: Attach base sheet using OMG #14 Roofgrip Fasteners and Flat Bottom Plates, Dekfast #14 with
Dekfast Galvalume Steel Hex Plates, Polygrip Fasteners #14 with Polygrip Hex Plates or Trufast
#14 HD Fasteners with 3" Metal Insulation Plates spaced 12" o.c. in a 4" lap and 12" o.c. in two
equally spaced staggered rows in the center of the sheet.
Ply Sheet: One or more plies of Elastoflex SA V, Elastoflex SA V PLUS, Elastoflex SA V FR, or
Elastoflex SA V PLUS FR self - adhered.
Membrane: One ply of Polyfresko SBS SAP, Polyfresko SBS SAP FR, Polyfresko APP SAP, Polyfresko
APP SAP FR, Elastoflex SA P, Elastoflex SA P FR, Polyflex SA P, PolyKool or Polyflex SA P
FR self adhered.
Surfacing: (Optional) Install one of the approved surfacing products listed in Table 4 to obtain desired
coating or required fire classification.
Maximum Design
Pressure: -52.5 psf; (See General limitation #7.).
NOA No.: 13- 0514.10
Expiration Date: 10/11/17
Approval Date: 09/26/13
Page 20 of 26
WOOD DECK SYSTEM LIMITATIONS:
1. A slip sheet is required with Ply 4 and Ply 6 when used as a mechanically fastened base or anchor sheet.
GENERAL LIMITATIONS:
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for fire
ratings of this product.
2. Insulation may be installed in multiple layers. The first layer shall be attached in compliance with Product
Control Approval guidelines. All other layers shall be adhered in a full mopping of approved asphalt applied
within the EVT range and at a rate of 20-40 lbs. /sq., or mechanically attached using the fastening pattern of the
top layer
3. All standard panel sizes are acceptable for mechanical attachment. When applied in approved asphalt, panel size
shall be 4'x 4' maximum.
4. An overlay and/or recovery board insulation panel is required on all applications over closed cell foam insulations
when the base sheet is fully mopped. If no recovery board is used the base sheet shall be applied using spot
mopping with approved asphalt, 12" diameter circles, 24" o.c.; or strip mopped 8" ribbons in three rows, one at
each side lap and one down the center of the sheet allowing a continuous area of ventilation. Encircling of the
strips is not acceptable. A 6" break shall be placed every 12' in each ribbon to allow cross ventilation. Asphalt
application of either system shall be at a minimum rate of 121bs. /sq.
Note: Spot attached systems shall be limited to a maximum design pressure of -45 psf.
5. Fastener spacing for insulation attachment is based on a Minimum Characteristic Force (F') value of 275 lbf., as
tested in compliance with Testing Application Standard TAS 105. If the fastener value, as field- tested, are below
275 lbf. insulation attachment shall not be acceptable.
6. Fastener spacing for mechanical attachment of anchor/base sheet or membrane attachment is based on a minimum
fastener resistance value in conjunction with the maximum design value listed within a specific system. Should
the fastener resistance be less than that required, as determined by the Building Official, a revised fastener
spacing, prepared, signed and sealed by a Florida registered Professional Engineer, Registered Architect, or
Registered Roof Consultant may be submitted. Said revised fastener spacing shall utilize the withdrawal
resistance value taken from Testing Application Standards TAS 105 and calculations in compliance with Roofing
Application Standard RAS 117.
7. Perimeter and corner areas shall comply with the enhanced uplift pressure requirements of these areas. Fastener
densities shall be increased for both insulation and base sheet as calculated in compliance with Roofing
Application Standard RAS 117. Calculations prepared, signed and sealed by a Florida registered Professional
Engineer, Registered Architect, or Registered Roof Consultant (When this limitation is specifically referred
within this NOA, General Limitation #9 will not be applicable.)
8. All attachment and sizing of perimeter hailers, metal profile, and/or flashing termination designs shall conform to
Roofing Application Standard RAS 111 and applicable wind load requirements.
9. The maximum designed pressure limitation listed shall be applicable to all roof pressure zones (i.e. field,
perimeters, and corners). Neither rational analysis, nor extrapolation shall be permitted for enhanced fastening at
enhanced pressure zones (i.e. perimeters, extended corners and corners). (When this limitation is specifically
referred within this NOA, General Limitation #7 will not be applicable.)
END OF THIS ACCEPTANCE
NOA No.: 13- 0514.10
Expiration Date: 10/11/17
Approval Date: 09/26/13
Page 26 of 26
TdFU:R14571 - Roofing Systems
http:// database.ul.com/egi- bin /XYV /template/LISEX`T/1 FRAME/showpa...
"ELASTOFLEX SA V FR" or "ELASTOFLEX SA V FR BASE VENT" (self adhered).
Pty Sheet(OPtlomi): — "ELASTOBASE ", "XtraFtex SBS GLASS Base "(poly /sand), heat fused or mechanically fastened, or "ELASTOFLEX
SA V PLUS FR ", "ELASTOFLEX SA V FR" or.'!ELASTOFLEX,SA V. FR BASE VENT", (self adhered.).
Membrane: — "POLYFLEX SA P FR", "POLYFRESKO G APP SA P FR ", "ELASTOFLEX SA PFR ", "POLYFRESKO G SBS SA P FR ; "ELASTOFLEX
SA V FR HT", (self adhered):or "POLYFLEX G FR ", "XtraFtex APP G HP ", "Xtraflex APP G FR ", "POLYFRESKO G FR ", "DUFLEX G FR" "XtraFlex
APP Dual, "ELASTOFLEX S6 G FR ", "POLYFRESKO G SBS FR ", "ELASTOFLEX VG FR ", "XtraFiex SBS POLY G ", "XItraFlex SBS POLY G T",
" G" F S T' r"ELASTOSHIELD TS G FR ", heat fused
22. Dedc; C-15/32 Incline: 1/2
Insulation (Optthnal): Polyisocyanurate 1.5 in. (min.) with all joints staggered 6 -tn. (min.) from the plywood joints.
Base Sheet. - Type G2, mechanically fastened followed by "ELASTOBASE ", "XtraFlex SBS GLASS Base ", mechanically fastened.
Ply Sheet (Optional): — "ELASTOFLEX SA V PLUS FR", "ELASTOFLD( SA V FR" or "ELASTOFLEX SA V FR BASE VENT", (self adhered).
Membrane: — "POLYFLEX SA P FR ", "POLYFRESKO G APP SA P FR ", "ELASTOFLEX SA P FR "; "POLYFRESKO G SBS SA P FR", or "DUFLEX G
FR ", "XtraFlex APP Dual", "POLYFLD( G FR ", "XtraFlex APP G HP ", "Xtraflex APP G FR", "ELASTOFLE)( S6 G Firr "POLYFRESKO G SBS FR 7,
"ELASTOFLEX VG FR", "XtraFlex SBS POLY G ", "XtraFlex SBS POLY G T ", "XtraFlex SBS GLASS G% "XtraFlex SBS GLASS GT" or
"ELASTOSHIELD TS G FR ", heat fused,
23. Deck: NC Incline: 2
Insulation (Optional): - Atlas Roofing "ACFoam III" or' "ACFoam II" or Hunter Panels "H -IShteld any thickness.
Base Sheet, - "ELASTOBASE", "XtraFlex SBS GLASS Base "(poly /sand), heat fused or mechanically fastened or "ELASTOFLEX SA V FR ",
"ELASTOFLEX SA V PLUS FR or "ELASTOFLEX SA V FR BASE VENT", (self adhered).
Membrane: — "POLYFLEX SA P FR ",: "POLYFRESKO G APP SA P FR ", "ELASTOFLEX SA P FR ", "POLYFRESKO G SBS SA P FR ", "ELASTOFLEX
SA V FR Hl"', (self adhered) or "POLYFLEX G FR ", "XtraPtex APP G HP ", "Xtraflex APP G FR ", "POLYFRESKO G FR ", "XtraFlex APP Dual ",
"DUFLEX G FR "; "ELASTOFLEX S6 G FR ", "POLYFRESKO G SBS FR ", "ELASTOFLEX VG FR ", "Xtn6Flex SBS POLY G ", "XtraFlex SBS POLY G T",
"XtraFlex SBS GLASS G "XtraFlex SBS GLASS GT" or " ELASTOSHIELD TS G. FR ", heat fused,
24. Dedu C -15/32 Incline: 3
Insulation (Optional): — Polyisocyanurate, perfite, wood fiber or polyisocyanurate /peri(te boatd,.any thickness.
Barrier Board: — 1/4 In. (min) G -P Gypsum DensDeck ®, mechanically fastened with all joints staggered 6:1n from the plywood joints.
Base Suet: — "ELASTOBASE", "XtraFlex SBS GLASS Base" (poiy/sand), mechanically fastened.
Ply Sheet (Optional): - "ELASTOFLEX SA V PLUS FR" "ELASTOFLEX SA V FR" or "ELASTOFLEX SA V FR BASE VENT", (self adhered).
Membrane: "ELASTOFLEX S6 G FR ", "XtraFlex SBS POLY G "XtraFlex SBS POLY G T" or "POLYFRESKO G SBS FR ", heat fused.
25. Deck: NC Incline: 3
Insulation (Optional) : — Atlas Roofing "ACFoam III" or "ACFoam II" or Hunter Panels "H- Shield"„ any thickness.
Base Sheet: — "ELASTOFLEX SA V PLUS FR ", "ELASTOFLEX SA V FR" or "ELASTDFLEX SA V FR BASE VENT" (self adhered).
Membrane: — "POLYFLEX SA P FR ", "POLYFRESKO G APP SA P FR ", "ELASTOFLEX SA P FR" or "POLYFRESKO G SBS SA P FR" (self
adhered).
26. Deck: NC Inclined 1/2
Base Sheet: - Type G1.orG2, mechanically fastened.
Membrane: — "POLYFLEX G", "XtraFlex APP G HP TOR ", "Xtraflex APP G" or "POLYSOND G% heat fused.
27. Deck: NC IncUne: 3
Membrane: "POLYFLEX SA P FR ", "POLYFRESKO G APP SA P FR ", "POLYFRESKO G SBS SA P FR "or "ELRSTOFLE( SA P F.R" (self
adhered).
28. Deck: NC Incline: 1
Insulation (Optilomi): — Polyisocyanurate, any thickness.
Base sheet (Optional): "ELASTOFLEX SA V", "ELASTOFLEX SA V PLUS "; "Xtraflex SBS:Base SA" or "ELASTOFLEX SA :V BASE VENT",
self- adhered or "ELASTOBASE ", "XtraFlex SBS GLASS Base" ( poly /sand), mechanically fastened.
Membrane: — "POLYFLEX SAP", "Xtraflex APP G SA" "XtraFlex KooI APP GSA ", or "POLYFRESKO G APP SA P"self- adhered or "POLYFLEX
FG FR ", heat fused.
29. Deck; C -15132 Ine ine: 1/2
Insulation : — Polyisocyanurate (2 In. min), glass fiber (15/16 in. mm), periite /polyisocyanurate composite, perlite /urethane compostte (2
In. min).,
Barrier Board: — 1/4 in. (min) G -P Gypsum DensDeckp, mechanically fastened, with 6 in. offset to plywood joints.
Base Sheet: - "ELASTOFLEX S6% "XtraFlex SBS POLY Base ", "ELASTOFLEX P -C" (heat fused or mechanically fastened).
Membrane: — "ELASTOFLEX S6 G ", "ELASTOFLEX S6 G -C" or "POLYFRESKO G SBS", (heat fused).
30. Deck: NC Incine: 1/2
Insulation (Optional) —Atlas Roofing "ACFoam III" or "ACFoam II", any thickness;
Base Sheet: - "ELASTOFLEX SA V PLUS FR ", "ELASTOFLEX SA V FR" or "ELASTOFLEX SA V FR BASE VENT", (self adhered).
Membranes • - "POLYKOOL SA" or "XtraKool APP S SA ", (self adhered):
5 of 10 3/26/2014 8:54 AM