The URL can be used to link to this page

ELC-13-1491Inspection Worksheet Miami Shores Village 10050 N.E. 2nd Avenue Miami Shores, FL Phone: (305)795 -2204 Fax: (305)756 -8972 nspection Number: INSP- 194650 Permit Number: ELC -7 -13 -1491 Inspection Date: July 19, 2013 Inspector: Devaney, Michael Owner: , BARRY UNIVERSITY Job Address: 11300 NE 2 Avenue Dalton Hall Miami Shores, FL 33138 -0000 Project: <NONE> Permit Type: Electrical - Commercial Inspection Type: Final Work Classification: Addition /Alteration VIT97 1111 , -SIM Parcel Number 1121360010160 -17 Contractor: C DAVIS ELECTRIC COMPANY, INC Phone: (954)432 -4334 Building Department Comments FIRE ALARM FOR DALTON AND DUNSPAUGH Infractio Passed Comments INSPECTOR COMMENTS False Passed Inspector Comments Failed El 511 Correction Needed Re- Inspection ❑ Fee No Additional Inspections can be scheduled until re- inspection fee is paid. For Inspections please call: (305)762 -4949 July 19, 2013 Page 1 of 1 Miami Shores Village Building Department 10050 N.E.2nd Avenue, Miami Shores, Florida 33138 JUL Tel: (305) 795.2204 Fax: (305) 756.8972 INSPECTION'S PHONE NUMBER: (305) 762.4949 - FBC 2010 BUILDING Permit No. PERMIT APPLICATION Master Permit No.. S `-f Gl Permit Type: Electrical JOB ADDRESS: 11300 NE 2nd Avenue - Dalton & Dunspaugh Hall City: Miami Shores County: Miami Dade Zip: 33161 Folio/Parcel #: 1121360010160 -16/17 Is the Building Historically Designated: Yes NO X Flood Zone: OWNER: Name (Fee Simple Titleholder): Barry University Inc. Phone #: 305 -899 -3050 Address: 11300 NE 2nd Avenue City: Miami Shores State: FL zip: 33161 Tenant/Lessee Name: Barry University Phone #: 305 - 899 -3050 Email: CONTRACTOR: Company Name: C. Davis Electric Co. Inc. Phone #: 954- 432 -4334 Address: 1701 SW 100th Terrace City: Miramar State: FL zip: 33025 Qualifier Name: Charles E. Davis JR. -°LjC$e 0i -2 -75 Vk l Phone #: 954 - 432 -4334 State Certification or Registration #: EC0001038 Certificate of Competency #: Contact Phone#: (954) 275 -8381 Email Address: Ichristopher@cdaviselectric.com DESIGNER: Architect/Engineer: Phone #: Value of Work for this Permit: $ Square/Linear Footage of Work• Type of Work: ❑Address UlAlteration LINew ❑Repair/Replace. 13Demolition Description of Work: —Fire Alarm devices installation for Dalton / Dunspaugh Hall bathroom renovations Submittal Fee $ • OZ' Permit Fee $ 6 4�9r eZd CCF $ CO /CC $ Scanning Fee $ Notary $ Radon Fee $ DBPR $ Bond $ Training/Education Fee $ Technology Fee $ Double Fee $ Structural Review $ TOTAL FEE NOW DUE $ ° Bonding Company's Name (if applicable) Bonding Company's Address city State Mortgage Lender's Name (if applicable) Mortgage Lender's Address City State zip Zip Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING, SIGNS, WELLS, POOLS, FURNACES, BOILERS, HEATERS, TANKS and AIR CONDITIONERS, ETC..... OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws regulating construction and zoning. "WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT." Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must promise in good faith that a copy of the notice whose property is subject to attachment. of commencement and construction lien law brochure will be delivered to the person for the first inspection which occurs s Also, a certified copy of the recorded notice of commencement must be posted at the job site Also, (7) days after the building permit is issued. In the absence of such posted notice, the inspection will not be approved a reinspection fee will be charged. Signature Signature Owner or Agent Contractor The foregoing instrument was acknowledged before me this 01 day of =Own 20 1:3, by who is to me or who has produced ' As identification and who did take an oath. NOTARY PUBLIC: Sign: Print: The foregoing instrument was acknowledged before me this 2nd day of JUly , 20.U, by Charles F Dayis ig who is personally known to me or who has produced ' MY Commission Exp ,,Oww% Notary Pub0c State of Florida ' SaIda Gabor L Comtrdss on DDOW12a res 05/0812014 sk'k tla aE sk ok sk � sk sk ak:k �k sk sk =k $e 'I'atc'�"krk�kH`sk APPROVED B Plans Examiner Structural Review (Revised 3 /12/2012)(Revised 07 /10 107)(Revised 06110/2009)(Revised 3/15/09) identification and who did take an oath. NOTARY PUBLIC: Sign: Print: J. My Commission Expires: °'�� rY��'- Commissi n # EE 217497 • eQ Expires September 25, 2016 Bonded Thm Troy Fain lnaarana M385 -7019 ek ak ak ak gs ak'k ads � nk �je �k ak =k'k sk $a ak,k �k ya 8a s$ =k ak'k � 8a ys �Iak'k ak sk � sk �k �k'k sk a$ $a �k zk � $a Zoning Clerk NOTICE OF COMMENCEMENT A 11111MORDED COPY MW BE POSTED ON THE JOB SITE AT TIME OF FIRST IIIISPECTM . . NO.--).).Z r.yrr0 'c1i �`f STATE OF FLORII THE UNDSPISIGNED hereby gives notice, that Improvements will be madefW69MRMY property, and in accordance with Chapter 713, Florida Statutes, the fo ou 'itii�lf i>Rif is provided in this Notice of Commencement. 1. Legal description of WITNESS my hand HARVEY RUVIN, C 8V CFN 2013R0527621 OR Bk 28708 Ps 2806; QP9) RECORDED 07 {i i,;,,= 2013 11:53:10 HARVEY RUVIfir CLERK OF COURT MIAMI-•DADE COUNTYr FLORIDA LAST PAGE COUNTY OF DADE ��O COU,yjl this is a true y of the Jam. Ctf ll ;e on 12 day of C' Official Seal 9n�IN ouo +at mis D.C. Space above reserved for use of recording 2. Description of • iIG��tL�t:.fan( /l1fZ+lyd!lr L�LI�� "_lr�.t„ar 3. Owner(s) name and address: F2 5, Surety (Payment bond required by o from contractor, If any) Name, address and phone number: Amount of bond $ 6. Lender's name and address: 7. Persons within the State of Florida designated by Owner upon whom notices or other documents may be served as provided by Section 713.13(1)(a)7., Florida Statutes, Name, address and phone number: 8. In addition to himself, Owners designates the 713,13(1)(b), Florida Statutes. persons) to receive a copy of the Lienoes Notice as provided in Section MW explraUon date is 1 year from the date of recording unless a different date is SPedfleA WARNING TO OWNER: ANY PAYMENTS MADE BY THE OWNER AFTER THE EXPIRATION OF THE NOTICE OF COMMENCEMENT ARE CONSIDERED IMPROPER PAYMENTS UNDER CHAPTER 713, PART 1, SECTION 713.13. FLORIDA STATUTES, AND CAN RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE COMMENCING WORK OR RECORDING YOUR N TICE OF COMMENCEMENT: Signature(s) of Ow Owner(s)' Authorized Officer/Director/Partner/Manager Prepared By Prepared By Print Name rifer Print Name TitlelOfflce P 2e f t "6( Tltle/Office STATE OF FLORIDA COUNTY OF MIAMI -DADE The foregoing instrument was acknowledged before me this day of ;E� ��® .i Individually, or -7-1=-i for ^- ersonally known, or ❑ produced the following type of identificati Signature of Notary Public: Print Name: # % Notary Public o nc SEAL} Cheryl Saida Garber VERIFICATION PURSUANT TO SECTION 92.625 FLORIDA S e My Commis on DD908128 Under penalties of perjury, I declare that t have read the #oregoIng and uF�° Expires oefotv2ola that the facts stated in it are true, to the best of my knowledge and belief, Signature(s) M.�_ (a) or Owner(s)`s Authorized Officer /Director /Partner /Manager who signed above: By BY ,23_01.52 PACIE0 era 2 2 (, 1 w 15 1— STATE OF FLORIDA DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION ELECTRICAL CONTRACTORS LICENSING BOARD (850) 487 -1395 1940 NORTH MONROE STREET .��.n TALLAHASSEE FL 32399 -0783 RODE, LAURA L ADVANCED FIRE AND SECURITY INC 2780 GATEWAY DRIVE POMPANO BEACH FL 33069 1 C # d 'D kPARZ DETACH HERE f. .. r ♦ l ... .Nt 0.7` O5',2 012: 12.8002412; E'00010 -6 �a= The" (ALARM SYSTEM CONTRACTOR 14amed below IS CERTlF k Under the provisf&ii of Chapt Expiration date: AUG_ 31, 2014, ),A RODE, LAURA --.L � ADVANCED FIRE AND SECURITY�i; . +�; 2780 GATEWAY ' DRIVE , jC.�� j POMPANO BEACH FL 33069 i� 1 ..:. RICK SCOTT GOVERNOR DISPLAI(AS REQUIRED BY LAW -SEQ# L12070501310 KEN LAWSON SECRETARY STAN OF Ftw 4 Congratulations! With this license you become one of the nearly g y rly one million Floridians licensed by the Department of Business and Professional Regulation. t 04 Ti�j =OF $ESS i�Nb ' �z FRER GUATION. t Our professionals and businesses range from architects to yacht brokers, from boxers to barbeque restaurants, and they keep Florida's economy strong. } EF0001 26 128002412 Every day we work to improve the way we do business in order to serve you better' For information about our services, please log onto www.myfloridalicense.coii EliT At There you can find more information about our divisions and the regulations that impact you, subscribe to department newsletters and leam more about the AaANC ICY .INt` Department's initiatives. Our missipn at the Department W.License Efficiently, Regulate Fairly. We consta31 stave to serve you better so that you can serve your customers. Thank you for doing business in Ronda, and congratulations on your new license! ? is cue T r ,c '� aey a, �5 F5 •' i�fiTR15fl13113 > #a�t�cn e r 1 C # d 'D kPARZ DETACH HERE f. .. r ♦ l ... .Nt 0.7` O5',2 012: 12.8002412; E'00010 -6 �a= The" (ALARM SYSTEM CONTRACTOR 14amed below IS CERTlF k Under the provisf&ii of Chapt Expiration date: AUG_ 31, 2014, ),A RODE, LAURA --.L � ADVANCED FIRE AND SECURITY�i; . +�; 2780 GATEWAY ' DRIVE , jC.�� j POMPANO BEACH FL 33069 i� 1 ..:. RICK SCOTT GOVERNOR DISPLAI(AS REQUIRED BY LAW -SEQ# L12070501310 KEN LAWSON SECRETARY DOW Name of PVC400to contact Persons Compaim AP029,2043 D&D man 0 89" u"W"Ofty Me GO&OO "awls mmakda ,N, qql LM z PAR? HUMM Y 'eta M201fthim included Excladed q, D Autog*d Oft to be pmMed by cusionwer to Advanced Plra A 0 professional nalimew review, Sion and Sash provided by Advanaed Fire Y 'eta M201fthim included Excladed q, D Autog*d Oft to be pmMed by cusionwer to Advanced Plra professional nalimew review, Sion and Sash provided by Advanaed Fire profoaglo#al lin&aw MIOW, ftft and 604 by 04110ft CO d ftop vmwbmo S P"kass Florida Soles Tax n MWedited DmWM$s [a parts C3 L�l UL or FM Certificate . ......... . . ... ...... .... . ....... n P Spre Pads, per "Sciftattom C]. - 0 Others n 0 athen 0 0 As-SuM Dmvftss 13 0 Logbook n., 0 Fbai inspactiona and IA PA Certification En .r ■ ■th Maudal $ 7 \TJB on «fax - Labor tea■ —VL ■a£a >T ./< . ^ Priam quoted are arm for 40 « \ . ...... .. . . . . .. AH4 may mq#Im ada■#■k #ev!ast ntmt Cwto requiramnis MZ D 0 D Ct---+ q ?) [VOTE: ALL SHEET MUST BE REVIEWED MIAMI -DADE COUNTY BUILDING AND NEIGHBORHOOD COMPLIANCE DEPARTMENT Herbert S. Saffir Permitting and Inspection Center 11805 SW 26th Street (Coral Way) • Miami, Florida 33175 -2474 • (786) 315 -2100 APPLICATION FOR MUNICIPAL PERMIT APPLICANTS THAT REQUIRE PLAN REVIEW FROM MIAMI -DADE FIRE RESCUE AND /OR DEPARMENT OF ENVIRONMENTAL RESOURCES MANAGEMENT PROVIDE MUNICIPAL PROCESS NUMBER HERE ddre 11300 NE 2ND AVENUE Contractor No. EC0001038 ° c Fob° 1s2s136001016016/17 0 o Last four (4) digits of Qualifier No. 0021 Name C. Davis Electric Co., Inc. Lot 131 °ck a o a Contractor Qualifier Name Charles E. Davis Jr. . 180�a Subdivision POpg 8N Address 1701 SW 100 Terrace Metes and bounds 36 52 4140 AC SE114 OF NE114 LESS E35FT & LESS W40Fr Miramar FL 33025 City State _ _2ip [ XJ New Construction on [ j Demolish Current use of property EDUCATIONAL - PRIVATE Vacant Land ( ] Shell Only o [ J Alteration Interior [ ] Alteration Exterior [ J Addition Attached [ ] Addition Detached L^ Description of Work FIRE ALARM DEVICES a0 ( J Relocation of Structure [ ] Re -Roof �' ® INSTALLATION @ Dalton & Dunspaugh Halls �a I ] Enclosure [ J Foundation Only Sq. Ft. nits Floors [ J Repair [ ] Repair Due to Fire NJ Value of Work Oil 0 [ J MOLD' [ J Chg. Contractor Owner BARRY UNIVERSITY INC Address 11300 NE 2 AVENUE w Category [ ] Re-Issue i [X] MELE 04 ( J Re -Stamp I City Miami Shores State IL Zip 33161 [ J MLPG [ ]Revision w Phone 305 -865 -5707 Last four (4) digits of [ J MMEC [ J Not Applicable for ( j FIRE ac Fire Owner's Social Security No. us Name VN r-1 S �e, 12 kC Y Owner oz za. Address wtr z Address City State Zip City State —Zip, a�rY C a� a E / Phone ��'�� L 7 Is- `' W � ; Uj Phone i am requesting a Special Request Plan Review (SRI yo be scheduled as soon as possible at the rate of $190 for the first hour and $65 per each itional hour in addition th eview fees. Minimum charge one -hour. w1- Request: Date: 4 ;? mW g 2'4 Request: Date: Ix 3"' Request: Date: 2 I am requesting Optional Plan Review (OPR) to be scheduled as soon as possible at the rate of $75 for each discipline. a Additional review fees may apply. O 0 1f1Request: Date: og 2- Request: Date: w� 31' Request: Date: 0 123.01.182 12109 Rre Checklist MIAMB s Based M NFPA 72 2T' Ed. 8NFPA S and IM 2M' Ed. AN am $ spanes am bbeW 6ofteOV dw& aria, and ft g find has been pwvited iw ag assembly awe a an doDor, 35 An now. w . rekuaW dow1wo an kkdbW undo fter p1mos and e owvWe AM ftg= shaft ON Mw eM •lJ', T'�'. j i +q� 9 i r 1r`� ' 1 f, n t �rtFj :u "a. 6, a r �r<< �u. • F. .i irr •Gx�r^ re �r,.: c .r i,r, ni lia6.w .: .i ai. Fv f30e aS 49 1 A) be ado flow any. as viater Is I 50 I The bcation 01 Bates M PMVeaW (BFPL Past �e vatve (Pi1) and Fire Dept C rctM (FLH;) are MWrow an me am Designed by- Ft�e �- ecu�e Pawe 772-- / 700 A) cmated ityv: 08 12092 ON ALL RRE A4ARM PLAN aUMIIflPffAIS 20F2 ,/ N q. October 31, 2005 DN -5262 • A -103 �J NOT 1 F 1 E R® AFN300 and AWAN by Honeywell Analog Fire Panels Section: Intelligent Fire Alarm Control Panels GENERAL The AFP -300 and AFP -400 are compact, cost - effective, in- telligent fire alarm control panels with a total capacity of up to 563 points and an extensive list of powerful features. The AFP- 300/400 integrates conventional output circuits, such as notification, telephone, and speakers, with the in- telligent features of one or two signaling line circuits (SLC) and 198 or 396 intelligent/addressable points. FEATURES • One loop (AFP -300) or two loops (AFP -400) Style 4, 6 or 7. • 198 intelligent devices per loop (99 intelligent detec- tors and 99 intelligent modules). • 396 intelligent device capacity on the AFP -400; 198 on the AFP -300. • VIEW ®, HARSHTM, Advanced Multi- Sensor (AMS) op- tions. • Up to 68 internal circuitstrelays, plus 99 programmable zone output relays for a total capacity of 563 points. • Four integral Notification Appliance (signal) Circuits (NACs), Style Z or Y (Class A or B). • 6.0 A power supply, plus 6.0 A expanders. • NACs may be programmed for Steady, March Time, Temporal, California code, or Canadian Two - Stage. • Modified California code, pulsed on time. • Tornado Warning activates different Notification Appli- ance Circuit code. • Alarm, Trouble, Supervisory, and Security relays, stan- dard. • Peer -to -peer network- ready. • Intelligent features: V Manual sensitivity adjustment — 9 levels. V Pre -alarm intelligent sensing — 9 levels. Day /Night automatic sensitivity adjustment. i/ Drift compensation. Multi - detector algorithm involves nearby detectors in alarm decision. Auto detector test (meets NFPA 72). ✓ Maintenance alert (two levels). r/ Self - optimizing pre -alarm adjusts pre -alarm level to environment automatically. i/ Activate local sounder base on pre - alarm. LED blink control for sleeping areas. s/ Automatic device type check. r/ Trouble after 20 detector verifications. • Releasing features: V Ten independent hazards. ✓ Sophisticated cross -zone (three options). Delay timer and Discharge timers (adjustable). ✓ Abort (four options). California uL UIC 97170-0028:182 L asals Mrh LISTED CS118/733 7165- 0028:181 S635 City of M EA FM Chicago 17 -96 -E (AFP -400) CLASS 1:1291 E 17 -96 -E Vol. 11 (AFP -300) APPROVED CLASS 2: 1729E City of DENVER (AFP -400) 3 6 E 3 3 q Z 8 • Sensitivity windows: ION — 0.5 to 2.5%/foot obscuration. ✓ PHOTO — 0.5 to 2.35 %1foot obscuration. re MULTI- SENSOR — 0.71 to 4.0 9,61foot obscuration. V VIEW® — 0.03 to 1.0 %/foot obscuration. • Low - pressure COZ support: ✓ Expanded soak timer - 0 to 9999 seconds. r/ Manual release delay (10 seconds) type ID. ✓ `Second shot" monitor module type ID. V Triple -coded notification circuit type ID. • Voice and telephone features: V Solid state message generation. ,✓ Hard -wired voice control module options (single - address mode modules). HARSHTM and NOTI•FIRE•NET"m are trademarks;VeriFireli), VIEW® and NOTIFIERO are registered trademarks of Honeywell International Inc. Microsoft® and Windows® are registered trademarks of the Microsoft Corporation. This document is not intended to be used for installation purposes. We try to keep our '�O �00� product information up -to -date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact NOTIFIER. Phone: (203) 484 -7161 FAX: (203) 484 -7118 �� N OT I F 1 E R• I M BIFEIINi 8 MAMUACII{IIIA by Honeywell 12 Clintonville Road, Northford, Connecticut 06472 QUALITY S Y S T E M S DN -5262 • 10/31/05 — Page 1 of 10 x ✓ Distributed voice options (XP transponders). ✓ Firefighter telephone option. 30- to 120 -watt high - efficiency amplifier. ✓ Backup tone generator and amplifier option. ✓ Dual channel option. • Telephone control module type ID. • Optional UDACT, 396- channel digital alarm communi- cator transmitter with AC fail delay. • 80- character displays (up to 32) for remote annunciation. • ACS annunciators (EIA -485), including LDM custom. • Two -wire detector interface provides compatibility with many manufacturers' detectors for retrofit applications. • Integral printer interface (80- column and 40- column printers). • Integral 80- character LCD display, backlit (2 lines x 40 characters). • Field- programmable on panel or on PC, with program check, compare, simulate. • Full QWERTY keypad behind flip -down door. • Autoprogramming and Walk Test. • Identifies two devices set to the same address. • History file with 800 -event capacity in nonvolatile memory, plus separate 200 -event alarm -only file. Page 2 of 10 — DN -5262 • 10/31/05 • Programmable waterflow or supervisory selection per point. • Alarm Verification selection per point, with tally. • Verification Trouble counter. Trouble indication after a detector verifies 20 times. • Programmable Positive Alarm Sequence (PAS) Presignal per NFPA 72. • Silence inhibit and Auto Silence timer options. • Programmable non -alarm points for lower priority func- tions. • Remote ACK / Silence / Reset / Drill via addressable modules. • Maintenance Reports may be sorted via PC by compen- sation value (dirty detector), peak alarm value, or address. • Automatic time control functions, with holiday exceptions. • Dual rate charger for up to 90 hours of standby power. • Rapid poll algorithm for manual stations. Responds to alarm /activation in less than three seconds. • SLC loop maximum length 10,000 feet (3,048 m) @ 12 AWG (3.31 mm2). • Surface Mount Technology (SMT) electronics. • High -speed RISC 16 -bit microprocessor. • Extensive built -in transient protection. SAMPLE SYSTEM BLOCK DIAGRAM o UP o 0 0 TO Bo 32 Bo moo° I LCD -80 Remote Display /Control up to 68 fully programmable output circuits 0 z v, N N O y O I v m CD CD C.0 0 0 RS-485 AFP -400 shown in CAB -4 with voice alarm system RS -232 RS-232 Terminal PRN Printer 0 FCM -1 SLC Intelligent Loop 1 XP Transponder NAC FSI -851 FSP -851 DEVICES Ion Photo FST -851 Thermal — — — — — — — — — — . NBG -12LX FMM -1 Fixed t I DC SLC Intelligent Loop 2 DEVICES FSP -851T FST -851R FAPT -851 Photo) Thermal Advanced ----- - - - - -, NBG -12LX FMM-1 Thermal ROR Multi- Sensor I DC RS- 485 640 annunciator /control points AFP -400 shown in CAB -4 with voice alarm system RS -232 RS-232 Terminal PRN Printer O 0 0 FCM -1 XP Transponder NAC O 0 0 FCM -1 XP Transponder NAC �u n� �u ❑� �u n� �u o� NINON- r %r. CRT -2 Terminal f T Ir The CPU - 300/400 EIA -232 Printer Port Slide -in Label EIA -232 EIA -485 Port Terminal Port "Terminal Mode" EIA -485 Port E NONE on SLC Loop #1 (Style 4, 6, or 7) SLC Loop #2 (AFP -400 only) _ (Style 4,6, or 7) on on 80- Character (2 x 40) Back -Lit LCD Display ® �o • • •D Optional *The MPS -400 is a 6 amp Transmitter module power supply. Total power, (4XTM connector). including internal modules, cannot exceed 6 amps. �n UZC Coder Input ®l Door Tamper Switch (STS -200) Meter Module Option (MPM -2) Page 4 of 10 — DN -5262 • 10/31/05 --- - - -o - - -o --- o- - -o - -- o - -- o i ------------------_---_--------- PDWEX WAPMNBIAPM O TROIIBI OgXISD NL-E(yN�C.ED Status LED's )pAI,IIARM 3IEP�d]NA 9 CE �''TE pia /F� PE9ET YlJ TG9TP tl I-- - - - --- _ - --- - - - --- - - - - -- -I __ _ _____ Control Switches .0000000000 MWA EPROM 1®090000000 0 _ 0=0. 1009000000 a �®�®i Programming i0 ©00 ®000 ®a® 0■lzrl■j Keypad Flip -Down Door (covers the programming keypad) The MPS -400 Main Power Su I pp y Form -C Alarm, Trouble, Supervisory, and Security contacts. (3 amps @ 30 2 non- resetta Resettable VDC) (Note: Supervisory and Security contacts can be converted to alarm 24 VDC circuits 24 VDC � rated 1.25 amps 12 5 amps* . contacts) NAC or Releasing each* circuits 1 & 2. Class A or Class B, a ea� ® ® ®� � ® �* mmm (Z' °mmmm mmmm 24 VDC @ 2.5 amps each.* p AC Power 120/240 VAC (Field Selectable) ® "'�" ® `` ".M" ®^� • °M °® ••• �■ s= "w ®® " ®® tl� ® ®® �b ® ®� NAC or Releasing © O Circuits 3 & 4. ■•••q••• o Class A or B, 24 Battery (12 -60 A.H.) a "° VDC @ 2.5 amps each.* Status/Trouble LEDs • • •D Optional *The MPS -400 is a 6 amp Transmitter module power supply. Total power, (4XTM connector). including internal modules, cannot exceed 6 amps. �n UZC Coder Input ®l Door Tamper Switch (STS -200) Meter Module Option (MPM -2) Page 4 of 10 — DN -5262 • 10/31/05 Intelligent Sensing Intelligent Sensing is a set of software algorithms that provide the AFP- 300/400 with industry- leading smoke detection capability. The development of these sophisticated algorithms are made possible by the close coop- eration between Notifier and System Sensor, the world leaders in fire detection and alarm technology. These complex algorithms require many calculations on each reading of each detector, and are made possible by the very high speed microcomputer used by the AFP- 300/400 (16 -bit RISC Reduced Instruction Set Computer). O Drift Compensation and Smoothing. These ak gorithms (U.S. patent pending) identify and compensate for long -term changes in the analog readings from each smoke sensor. Long -term changes are usually caused Analog by dust accumulation inside the smoke chamber. Drift Reading compensation allows the detector to retain its original ability to detect actual smoke, and resist false alarms, even as dirt accumulates. It reduces maintenance re- quirements by allowing the system to automatically per- form the periodic sensitivity measurements required by NFPA. Smoothing filters are also provided by software to remove transient noise signals, usually caused by elec- trical interference. Different smoothing algorithms are used, depending on the sensitivity selection of each de- tector. © Maintenance Warnings. When the drift compensation performed for a detector reaches a certain level, the performance of the detector may be compromised, and special warnings are given. There are three warning levels: (1) Low Chamber value, usually indicative of a hardware problem in the detector; (2) Maintenance Alert, indicative of dust accumulation that is near but below the allowed limit; (3) Maintenance Urgent, indicative of dust accumulation above the allowed limit. The Maintenance Alert level allows maintenance before the performance of the device is compromised. © Sensitivity Adjust. Nine sensitivity levels are provided for alarm detection. These levels can be set manually, or can change automatically between day and night. Nine levels of pre - alarm sensitivity can also be selected, based on predetermined levels of alarm. Pre -alarm operation can be latching or self - restoring, and can be used to activate special control functions that are a subset of the alarm control program. O Self- Optimizing Pre - Alarm. Each detector may be set for "Self- Optimizing" pre - alarm. In this special mode, the detec- tor "learns" its normal environment, measuring the peak analog readings over a long period of time, and setting the pre -alarm level just above these normal peaks. This allows extremely sensitive pre -alarm capability with reasonable protection against non -fire signals. Alarm Level – – – – – – – – – – – – – – – – – – – – without compensation with oompensation and smoothing Time (days) i, Awacsl.wmf Maintenance Urgent --► Maintenance Alert Low Chamber Reading —► - _ Prealarm Threshold Normal Threshold Awacs2.wmf Time (days) 10 Awacs4.wmf © Cooperating Multi- Detector Sensing. A feature of intelligent sensing is the ability of a smoke sensor to consider readings from nearby sensors in making alarm or pre -alarm o decisions. Using logic algorithms, each sensor can include up a Alarm to two other sensors in its decision. Without statistical sacrifice — — — — — — — — — — — —,-1 — in the ability to resist false alarms, it allows a sensor to increase Combine d its sensitivity to actual smoke by a factor of almost 2 to 1. Multi- 0 3 Sensors - detector sensing also allows the combination of ionization with Y photoelectric technology in reaching an alarm decision. o Time (minutes) 5262aw5.wmf DN -5262 • 10/31/05 — Page 5 of 10 FIELD PROGRAMMING OPTIONS AUTOPROGRAM Autoprogram is a timesaving feature of the 300/400. It is a special software routine that allows the 300/400 to "learn" what devices are physically connected and automatically load them in the program with default values for all param- eters. Requiring less than 30 seconds to run, this routine allows the user to have almost immediate fire protection in a new installation, even if only a portion of the detectors are installed. The routine will find all intelligent detectors and modules, and present them to the installer for edit of the de- AUTQPROGRAM 'z11 WAIT fault option selections, if desired. If a device is found that already exists in memory, autoprogram skips over that device (only new devices or missing devices are presented to the installer). Often the installer will perform autoprogram as a first step in a new installation, then upload the program into a PC to add all custom labels and other information, then download from the PC to the 300 /400. KEYPAD PROGRAM EDIT The 300/400 has the exclusive feature of full program cre- ation and edit capability from the front panel keypad, while continuing to provide fire protection. The architecture of the 300/400 software is such that each point entry carries its own program, including control -by -event links to other points. This allows the program to be entered with indepen- dent per -point segments, while the 300/400 simultaneously monitors other (already installed) points for alarm conditions. In addition to avoiding system shutdown, program edit from the panel keypad has the advantage of not requiring an on -site PC. This can save significant installation time for minor program changes. The 300/400 site - specific program is password protected, and all information is stored in nonvolatile memory. Menu "trees" are provided to lead the trained installer through the program steps without the necessity to refer to the programming manual. VeriFire® Software PC software is available for off -line programming and test utility that can greatly reduce installation programming time, and increase confidence in the site- specific software. VeriFire® is a Windows&based program providing techno- logically advanced capabilities to aid the installer. The in- staller may create the entire program for the 300/400 in the comfort of the office, test it, store a backup file, then bring it to the site and download from a laptop into the panel. The program includes error checks for common program- ming mistakes, such as an input point that does not activate any outputs, or an output point that is not linked to any inputs. It also includes a simulation routine that will list all of the output points that are activated by a particular input point (alternatively, it will list all the input points that are linked to a particular output). Although this does not eliminate on -site testing, it greatly increases confidence in the final installa- tion. For example, a 200 -input and 100 - output point system, without using the software, could require 20,000 test ob- servations to verify all possible 1/0 links. The software includes a compare routine, pictured at right, that can also greatly help the installer. When a new program is created, it may be compared with a previous version and differences are highlighted. If the program is modified from the panel keypad, it may be uploaded into the PC, and com- pared with the previous version stored on disk. The identifi- cation of program differences greatly helps the installer in testing the installation. NFPA 72 requires that reacceptance test of a fire alarm system be performed on 100% of all points that are "known" to be modified. The software allows the installer to determine the exact points that are changed. 526We2Aff Page 6 of 10 — DN -5262 • 10/31/05 BASIC EQUIPMENT PACKAGES There are two packages available to configure an AFP -300 or 400 system. The standard model, BE -300 or BE -400, is designed to mount in a NOTIFIER full -sized cabinet in the CAB -3/4 Series. The BE -300AA or BE -400AA is a minia- ture package designed for a smaller cabinet, the CAB - 400AA. Order one of the following BE packages: BE -400: Base Equipment includes the CPU (2 loops) module (CPU -400), an 80- character display, program- ming keypad, MPS -400 main power supply, installation instructions, chassis and required hardware. Order CAB -31-4 Series cabinet separately. BE- 400AA: Base Equipment for use with CAB -400AA mini cabinet. It is similar to BE-400 but for use in smaller cabinet. Includes MPS -40ORB and transformers. Supports one output option module. Order CAB -400AA cabinet separately. BE -300: Base Equipment includes the CPU (11oop) module (CPU -300), an 80- character display, program- ming keypad, MPS -400 main power supply, installation instructions, chassis and required hardware. Order CAB -31-4 Series cabinet separately. BE- 300AA: Base Equipment for use with CAB -400AA mini cabinet. It is similar to BE -300 but for use in smaller cabinet. Includes MPS -40ORB and transformers. Supports one output option module. Order CAB -400AA cabinet separately. CAB -3/4 Series: The AFP- 3001400 utilizes CAB -31-4 Series cabinets. See data sheets DN-3549 and DN- 6857. SYSTEM MODULES The AFP- 300/400 includes the ability to communicate with up to 8 conventional modules each with up to 8 circuits. Any mix of notification, relay, speaker, or telephone may be used. Choose any combination of up to eight output modules: ICM/ICE, CRM/CRE, DCM-4 or VCMNCE. ICM-4: Notification Appliance Circuit Module, provides four Style Y or Style Z alarm Notification Appliance Circuits. Maximum signaling current is 3.0 amps per circuit or 6.0 amps per module, subject to power supply _ 6 limitations (includes auxiliary power 3 51m harness, ELRs and slide -in labels). E W-1 9D Includes ON /OFF controls and ON /OFF m m LEDs See ICM4 data sheet DN- 0010. ° ICE-4: Notification Appliance Circuit Expander, expands ICM -4 to provide a total of eight (8) Style Y or Style Z alarm Notification Appliance AN Wig Circuits. Circuit ratings are same as ICM -4. slow (Maximum of one per ICM -4.) May also be = used to add four Notification Appliance Circuits to VCM-4. d , See ICE-4 data sheet DN -0010. o° CRM-4: Control Relay Module, four (4) Form - C relay contacts, rated at 5.0 A, 120 VAC or 28 VDC (resistive) per circuit. Includes �m manual ON /OFF controls and LEDs. 3 WD KJ See CRM-4 data sheet DN -0461. E �m o �m CRE-4: Control Relay Expander, expands CRM -4 to provide a total of eight (8) Form -C relay contacts. (Maximum of one per CRM -4.) =1 May also be connected to add four relays to 3 ICM-4, TCM -2, TCM-4, or VCM-4. See CRE-4 data sheet DN -0461. e ° VCM-4: Voice Control Module provides four Style Y or Style Z speaker . 3 circuits, eight manual select switches e and indicators, slide -in labels, and plug- fD in terminal blocks. Move jumper to �. convert to telephone circuits with remote , m ring signal and local call -in flash. May be w, expanded to 8 circuits with VCE-4, ICE - 4, or CRE-4. VCE-4: Voice Control Expander 3 ?1 Ili adds four circuits to VCM -4. V m Note: VCM-4 / VCE-4 combing- Lion must be 8 speaker or 8 phone circuits. ®m o DCM-4: Dual Channel Module provides four Style Y or Style Z speaker circuits plus four channel A/B select relays. Not expandable. OTHER OPTION MODULES ARM-4: Auxiliary Relay Module, four (4) Form -C relays controlled by a relay module (CRM -4 or CRE -4). N.O. contacts - rated 20 amps, N.C. contacts rated 10 amps at 125 VAC and 30 VDC. Maximum o : M of one for each CRM -4 or CRE-4. See o ARM-4 data sheet DN -0461. VCC -1: Voice Control Center. Provides a variety of user selectable tones on a single channel. Up to two different tones or messages may be selected on a single channel. Also provides optional digital voice message capability and on -site programmable voice messages. Includes Audio Message Generator (AMG -1) microphone, cables, dress panels, and instructions. VTCC -1: Voice/Telephone Control Center. Provides all that the VCC -1 provides plus two -way Fire Fighter's Telephone (FFT -7) capability. TCGf: Telephone Control Center. Provides a stand- alone two -way Fire l=ighter's telephone (FFT -7S). Includes cables, dress panel and instructions. AMG -E: Audio Message Generator (without micro- phone). Order in addition to VCC -1 or VI-CC -1 if two- channel system is required. FFT- 71FFT -7S: Fire Fighter's Telephone control with master handset. AA-30: Audio Amplifier - 30 watts. Switch -mode power. Includes amplifier and audio AC ° ® � 3224a30 —f O • 0 0000 DN -5262 • 10/31/05 — Page 7 of 10 input supervision, backup input, and automatic switchover, power supply, cables. AA- 120 1AA- 100 :Audio Amplifier provides up to 120 watts of 25 VRms audio power for the AFP -400. The amplifier contains an integral chassis for mounting to a CAB -631 -B4, - C31--C4, or - D31-D4 backbox (consumes one row). Switch -mode power. Includes audio input and amplified output supervision, backup input and automatic switchover to backup tone. Order the AA -100 for 70.7 VRms systems and 100 watts of power. VROM -(n): Factory- programmed message for installation in AMG -1. Provides up to 24 seconds of evacuation message on nonvolatile memory chip. Choose one of many standard messages available. Up to two of these messages may be installed in one AMG. Includes VROM, instructions for installation and operation, and written text of message. 3576 "`om.wmf APS -6R: Auxiliary Power Supply ° (expander). Provides up to 6.0 amperes of regulated power for compatible Notification appliance circuits. Includes battery input and transfer relay, and overcurrent protection. Mounts on one of four positions on a CHS -4L or CHS-4 chassis. See APS-6R data sheet DN- 5952. 5952co —f FCPS 24: The FCPS -24 is a remote 6 -amp (4 -amp continuous) repeater /power supply. See FCPS -24 data sheet DN -5132. FCPS 2456/-2458: Remote six -amp and eight -amp power supplies. See FCPS 2456/-2458 data sheet DN -6927. UZC -256: Programmable Universal Zone Coder provides positive non - interfering successive zone coding. Microprocessor - controlled, field - programmable from IBM- compatible PCs (requires programming kit). See UZC -256 data sheet DN -3404. LCD- 801LCD -80TM. 80- character, backlit LCD display. Mounts up to 6,000 ft. from panel. Up to 32 per AFP- 400. See LCD -80, LCD-80TM data sheet DN -3198. Page 8 of 10 — DN -5262. 10/31/05 ACS: Annunciator Control Modules ACM -16AT, AEM -16AT, ACM -32A, and AEM -32A. See ACS data sheet DN -0524. AFM: Annunciator Fixed Modules AFM -16A, AFM -16AT, and AFM -32A. See AFM data sheet DN -0056. LDM: Lamp Driver Modules LDM -32, LDM -E32, and LDM - R32. See LDM data sheet DN -0551. ACM -8R: Remote Relay Module with eight Form -C contacts. Can be located up to 6,000 ft. from panel on four wires. See ACM-8R data sheet DN -3558. RPT -485: Repeats EIA -485 over twisted pair or converts to fiber -optic medium. See RPT data sheet DN -4737. XP: The XP Series Transponder provides conventional monitor and control points. See XP data sheet DN -0759. E 3 °w ♦ CHS-4: Chassis for mounting up to four APS -6R. o CHS -4L: Low - profile four- •• •• position Chassis. Mounts two AA -30 , amplifiers or one AMG - E and one AA -30. CHS -4114: Expansion 5262cn4L.wmf Chassis. Mounts up to four modules. Includes CHS-4, MP -1 (Module Dress Panel), and Expander Ribbon Cable. DP -1: Blank Dress panel. Provides dead -front panel for unused tiers or to cover AA- 30, AA -120, orAMG -E. 5262dp1.wmf CAB-4 Series: The CAB -4 Series cabinets are fabricated from 16 -gauge steel with unique full -front LEXANO reverse silk- screened for durability. The cabinet assembly consists of two basic parts: a backbox (SBB =4), and a locking door (DR =4 )that may hinge right or left. Cabinets are arranged in four (4) sizes, A through D (B [two -tier] is pictured at right). A trim ring option is available for 5871cab3.wmf semi -flush mounting. See CAB -4 Series data sheet DN -6857. LEXANO is a registered trademark of GE Plastics, a subsidiary of General Electric Company. CAB- 400AA: Provides small cabinet for CPU -400 and MPS- 400RB. Use with BE -400AA only. Space for one (only) output circuit module plus expander. MPS -400: Power Supply module. The MPS -400 includes 4 Notification Appliance Circuits (NAC) that can connect four Class A (Style Z) or Class B (Style Y) circuits. The NAC also can be used for Releasing applications. Includes four built -in system relays (alarm, trouble, security, and supervisory). For BE -400 replacement only. The MPS -400 is included in the BE kits. MPS- 40ORB: MPS -400 PC board only. Less transformers and mounting chassis. AGENCY LISTINGS AND APPROVALS See the first page of this catalog sheet for listing agencies and file numbers. These listings and approvals apply to the basic AFP -300 or AFP -400 control panel. In some cases, certain modules may not be listed by certain ap- proval agencies, or listing may be in process. Consult fac- tory for latest listing status. The AFP- 300/400 is UL Listed, per Standards 864 (Fire) and 1076 (Burglary). It meets NFPA 72 Local, Auxiliary, Remote Station, Proprietary, and Emergency Voice /Alarm Fire Sys- tem Requirements. SPECIFICATIONS • Primary input power, 120 VAC, 50/60 Hz, 3.0 Amps. • Total output 24 V power - 6.0 A." • Standard Bell circuits (4) per MPS -400 - 2.5 A each. • Four -wire detector power - 1.25 A. • Two non -reset regulated power outputs - 1.25 A each. • Battery charger range: 12 AH - 60 AH. (Use separate BB -55 cabinet for 55160 AH batteries.) • Charge high rate: 29.1 V. Float Rate: 27.6 V. Note: The MPS -400 has a total of 6.0 Amps of available power. This is shared by all internal modules and each MPS -400 circuit. SYSTEM CAPACITY: AFP -400 • Intelligent Signaling Line Circuits . ..............................2 • Intelligent Detectors .................... ............................198 • Addressable monitor /control modules ..................198 • Programmable internal hardware and output circuits (four standard) ...........................68 • Programmable software zones ... .............................99 • Special Programming zones ....... .............................14 • Programmable remote relay /annunciator points..... 99 • LCD -80 annunciators per system (observe power) 32 • ACS annunciators per system ... 10 Address x 64 points SYSTEM CAPACITY: AFP -300 • Intelligent Signaling Line Circuits . ..............................1 • Intelligent Detectors ..................... .............................99 • Addressable monitor /control modules ....................99 • Programmable internal hardware and output circuits (four standard) ...........................68 • Programmable software zones ... .............................99 • Special Programming zones ....... .............................14 • Programmable remote relay /annunciator points..... 99 • LCD -80 annunciators per system (observe power) 32 • ACS annunciators per system...10 Address x 64 points CONTROLS AND INDICATORS Program Keypad: QWERTY type (keyboard layout). 8 LED indicators: AC Power; Fire Alarm; Pre - Alarm; Secu- rity Alarm; Supervisory Signal; System Trouble, Disabled points, Alarm Silenced. Membrane Switch Controls: Acknowledge /Step; Silence; Evacuate; System Reset; Lamp Test. LCD Display: 80 characters (2 x 40) with long -life LED back- light. COMPATIBLE DEVICES, EIA -232 Port PRN -5: 80- column printer. See DN -6769. PRN -6: 80- column printer. See DN -6956. VS4095/S2: Printer, 40 column, 24 V. Mounted in external backbox. See DN -3260; order from Keltron, Inc. CRT -2: Video display terminal. See DN -3756. NAM -232W: Wire peer -to -peer NOTI•FIRE•NETTm net- work interface module. See DN -5331. NAM -232F: Fiber peer -to -peer NOTI•FIRE•NETTm net- work interface module. See DN -5331. COMPATIBLE DEVICES, RS -485 Port ACS Series: Remote Serial Annunciator /Control systems. See DN -0524. FDU -80: Remote LCD display, 80 characters. See DN -6820. LCD -80: Remote LCD display, 80 characters. See DN -3198. LDM Series: Remote custom graphic driver modules. See DN -0551. ACM -8R: Remote relay module, 8 Form -C relays. See DN -3558. NIB -96: Network Interface Board. See DN -0597. RPT -485 Series: Repeater, isolator and /or fiber optic mo- dem. See DN -4737. UDACT: Universal Digital Alarm Communicator Transmit- ter. See DN -4867. UZC -256: Zone Coder, up to 256 programmable codes. See DN -3404. COMPATIBLE INTELLIGENT DEVICES BEAMHK: Heating kit for transmitter /receiver unit of FSB - 200(S) below. See DN -6985. BEAMHRK: Heating kit for use with the reflector of FSB - 200(S) below. See DN -6985. BEAMLRK: Long -range accessory kit, FSB- 200(S) below. BEAMMRK: Multi -mount kit, FSB- 200(S) below. BEAMSMK: Surface -mount kit, FSB- 200(S) below. FSB -200: Intelligent beam smoke detector. See DN -6985. FSB -20OS: Intelligent beam smoke detector with integral sensitivity test. See DN -6895. FSI -851: Low - profile ionization detector. See DN -6934. FSP -851: Low - profile photoelectric detector. See DN -6935. FSP -851T: Low - profile photoelectric detector with 135 °F (57 °C) thermal. See DN -6935. FST -851: Thermal detector 135 °F (57 0C). See DN -6936. FST -851R: Thermal detector 135 °F (57 °C) with rate -of -rise. See DN -6936. FST -851H: 190 °F (88 °C) high- temperature thermal detec- tor. See DN -6936. FSD -751 PL: Low -flow photo duct detector with housing. See DN -6955. FSD -751 RPL Low -flow photo duct detector with relay and housing. See DN -6955. FAPT -851: Acclimate PIusTM low- profile multi- sensor de- tector. See DN -6937. FSH -751: HARSHTm Hostile Area Smoke Head. See DN -6875. FSL -751: VIEW® laser photo detector, will replace LPX- 751. See DN -6886. LPX -751: Low - profile VIEW® laser photo detector. See DN -5306. DN -5262 • 10/31/05 - Page 9 of 10 NBG -12LX: Addressable pull station, visible LED. See DN -6726. B224RB: Low - profile relay base. B224BI: Isolator base for low- profile detectors. B71OLP: Low - profile base. Standard U.S. style. B501: European - style, 4" (10.16 cm) base. B501 BH: Sounder base, includes B501 base above. FMM -1: Monitor module. See DN -6720. FMM -101: Monitor module, miniature. See DN -6720. FDM -1: Monitor module, dual, two independent Class B cir- cuits. See DN -6720. FZM -1: Monitor module, two -wire smoke detectors. See DN -6720. FCM -1: Control module. See DN -6724. FRM -1: Relay module. See DN -6724. ISO -X: Isolator module. See DN -2243. XP Series: Transponder. See DN -0759. XP5 -M: Transponder, five monitor points. See DN -6625. XP5 -C: Transponder, five control points or Form -C relays. See DN -6625. Page 10 of 10 — DN -5262 • 10/31/05 XP6 -C: Six- circuit supervised control module. See DN -6924. XP6 -MA: Six -zone interface module; connects intelligent alarm system to two -wire conventional detection zone. See DN -6925. XP6 -R: Six -relay (Form -C) control module. See DN -6926. XP10 -M: Ten -input monitor module. See DN -6923. XPIQ: Intelligent quad transponder. See DN -6823. OTHER ACCESSORIES 4XTM: Plug -in Transmitter Module. Provides municipal box and remote station connection. BAT Series: Batteries; the AFP- 300/400 battery range is 12 AH to 60 AH. See DN -6933. ROM- AFP400: Panel software upgrade kit. Includes latest factory software (consult factory). BB- 55(F): Battery Box (required for 55160 AH). Order "F" suffix for red cabinet. VeriFire -CD: Programming kit for PC. Includes CD, cable, and instructions. VeriFire -CDUG: Same as VeriFire -CD above except it does not include the cable. Other options as listed in previous sections. AEF42744F 7788F.gxd 8/24/2009 11:04 AM Pagel 7744F/7788F RF Subscriber Unit UL Fire, AA Burglary and NFPA -72 Compliant Advanced Wireless Alarm Monitoring The 7744F/7788F smart subscriber unit links an alarm panel to an alarm monitoring central station. This 2 -way transceiver and repeater in one is housed in a full size locking steel cabinet for superior performance. The 7744F/7788F supports a wide range of inputs such as NO /NC /EOL and direct voltage. It automatically senses wire and antenna cuts, and monitors battery and AC power status. Advanced status reporting, self - diagnostics and a built -in power supply make the 7744F/7788F the first choice for all wireless alarm communication needs. Full Data for Fire and Burglary Use with the optional Firetap for full fire data or the IntelliTap for full fire and burglary data. 7744F — 4 reversing FireTap 7770 polarity inputs plus 4 IntelliTap 7067 programmable EOL inputs NEMA 4 Enclosure 114 V �- Ptlagreffimable IDOL High Gain Antenna inputs with 8 zones Additional Back Up Battery Available in Burglary Beige or Fire Red sL x y L'DJ "max �,vtwc, NFPYC 2-way • Options for Full Data for Fire and Burglary UL Listed UL Listed Central >n • Available in 7744F & 7788F Station Zone Configurations Remote Station 864 Ed. 9, 827, 1610, �+ • Built -in Power Supply and 365,681 Battery Charger CSFM NFPA RFSection 8.6.3.5 • Local Annunciation Options on Board Advanced Wireless Alarm Monitoring The 7744F/7788F smart subscriber unit links an alarm panel to an alarm monitoring central station. This 2 -way transceiver and repeater in one is housed in a full size locking steel cabinet for superior performance. The 7744F/7788F supports a wide range of inputs such as NO /NC /EOL and direct voltage. It automatically senses wire and antenna cuts, and monitors battery and AC power status. Advanced status reporting, self - diagnostics and a built -in power supply make the 7744F/7788F the first choice for all wireless alarm communication needs. Full Data for Fire and Burglary Use with the optional Firetap for full fire data or the IntelliTap for full fire and burglary data. 7744F — 4 reversing FireTap 7770 polarity inputs plus 4 IntelliTap 7067 programmable EOL inputs NEMA 4 Enclosure 114 V �- Ptlagreffimable IDOL High Gain Antenna inputs with 8 zones Additional Back Up Battery Available in Burglary Beige or Fire Red sL x y L'DJ "max �,vtwc, NFPYC 2-way , AES_7744F 7788F.gxd 8/24/2009 11:04 AM Page 2 7744F/7788F RF Subscriber Unit Technical Specifications Radio Standard CSAA frequency ranges: 450 -470 MHz and 130 -174 MHz, VHF and UHF. Others available Standard Output Power 2 watts (requires FCC license) Power Input 16.5 VAC, 40VA UL listed Class II transformer required Voltage 12 VDC nominal Current 175mA standby; 800mA transmit Alarm Signal Inputs • 4 individually programmable Zones- NO/NC/EOL, trouble restore • RS -232 • Reversing voltage (7744F only) 12 or 24 VDC Operating Temperature Range 0° to 50 °C, 32° to 122 °F Storage Temperature Range -10° to 60 °C, 14° to 140 °F Relative Humidity Range 0 -85% RHC non - condensing Back up Battery 12V, 7.5 AHr Low Battery Reporting 22.5- minute test cycle AC Status Reports to central station after approximately 60 minutes without AC power, reports power restored after approximately 60 minutes of restored power. programmable from 60 to 180 minutes Antenna Cut (local reporting) Form 'C' Contact 1 AMP Size 13.25 "H x 8.5 "W x 4.3 "D 34cm x 21.5cm x 11 cm Weight 6.4 Ibs, 2.9 Kilograms (excluding battery) Colors Available in standard Burglary Beige or Fire Red Please specify when ordering Available Options • 7788F RF subscriber unit with 8 EOL inputs • 7744F RF subscriber unit with 4 EOL inputs and 4 reverse polarity inputs • 7770 - FireTap • 7067 - IntelliTap • NEMA 4 Enclosure Please specify when ordering AES - IntelliNet. is the industry leader in delivering high quality wireless mesh networks to the fire and security industry in commercial, corporate, government, and educational applications with its broad line of products and advanced network management tools. Users ofAES- IntelliNet networks have gained significant revenue, communications, and cost advantages while meeting the high standards of reliability required for the fire and security industry. AES - IntelliNet alarm monitoring systems are deployed at hundreds of thousands of locations in over 130 countries. ��%elo ESlIntelfiNet CORPORATION For Alarm Monitoring For more information Call 800 -AES -NETS (800 - 237.6387) AES Corporation 1 285 Newbury Street I Peabody, MA 01960 USA Tel. +1 978 - 535 -7310 1 Fax +1 978 -535 -7313 1 Email info @aes- intellinet.com Web www.aes - intellinet.com Available configurations • 7788F, 8 EOL inputs • 7744F, 4 EOL inputs w/4 reverse polarity inputs FOPS- 24S6(C /E) & FCPS - 2458(C/E) 6- & 8 -Amp 24 -Volt Remote Power Sunnlies General The FCPS -24S6E (6 -amp) and FCPS -24S8E (8 -amp) are remote power supplies with battery charger. The FCPS- 24S6/- 2458 may be connected to any 12 or 24 volt fire alarm control panel (FACP) or may be used as stand -alone supplies. Pri- mary applications include notification appliance (bell) circuit (NAC) expansion (to support ADA requirements and NAC syn- chronization) or auxiliary power to support 24 volt system accessories. The FCPS -24S6/ -2458 provides regulated and filtered 24 VDC power to four notification appliance circuits configured as either four Class B (Style Y) or Class A (Style Z, with ZNAC -4 option module). Alternately, the four outputs may be configured as all non - resettable, all resettable or two non - resettable and two resettable. The FCPS -24S6/ -2458 also contains a battery charger capable of charging up to 18 AH batteries. FCPS -24S6C & FCPS -24S8C are ULC- listed. NOTE. Unless otherwise specified, the terms FCPS -2456 and FCPS -2458 used in this document refers to the standard FCPS - 2456 and FCPS -24S8, FCPS -24S6C and FCPS - 24S8C, the FCPS -24S6E and FCPS -24S8E Features • UL- Listed NAC synchronization using System Sensor, Wheelock, or Gentex "Commander2" appliances. • Operates as a "sync - follower' or as a "sync- generator" (default). See note on page 2. • Contains two fully - isolated input/control circuits - triggered from FACP NAC (NAC expander mode) or jumped perma- nently "ON" (stand -alone mode). • Four Class B (Style Y) or four Class A (Style Z, with ZNAC -4 module) NACs. • 6 -amp (FCPS -24S6) or 8 -amp (FCPS -24S8) full load out- put, with 3 amps maximum /circuit, in NAC expander mode (UL 864). • 4 -amp (FCPS -24S6) or 6 -amp (FCPS -24S8) continuous output in stand -alone mode (UL 1481). • Compatible with coded inputs; signals passed through. • Optional power - supervision relay (EOLR -1). • In stand -alone mode, output power circuits may be config- ured as: resettable, (reset line from FACP required), non - resettable, or a mix of two and two. • Fully regulated and filtered power output - optimal for pow- ering four -wire smoke detectors, annunciators, and other system peripherals requiring regulated /filtered power. • Power - limiting technology meets UL power - limiting require- ments. • Form -C normally - closed trouble relay. • Fully supervised power supply, battery, and NACs. • Selectable earth fault detection. • AC trouble report selectable for immediate 2 -hour delay. • Works with virtually any UL 864 fire alarm control which uti- lizes an industry- standard reverse - polarity notification cir- cuit (including unfiltered and unregulated bell power). • Requires input trigger voltage of 9 - 32 VDC. • Self- contained in compact, locking cabinet - 15 "H x 14.5 "W x 2.75 "D (cm: 38.1 H x 36.83W x 6.985D). dn- 6927:a NOTIFIER� by Honeywell Includes integral battery charger capable of charging up to 18 AH batteries. Cabinet capable of housing 7.0 AH batter- ies. Battery charger may be disabled via DIP switch for applica- tions requiring larger batteries. Fixed, clamp -type terminal blocks accommodate up to 12 AWG (3.1 mm2) wire. Specifications Primary (AC) Power: • FCPS - 24S6C/ - 24S8C: 120 VAC, 60 Hz, 3.2A maximum. • FCPS - 24S6E/ - 24S8E: 240 VAC, 50 Hz, 1.6A maximum. • Wire Size: minimum #14 AWG (2.Omm2) with 600 V insula- tion. Control Input Circuit: • Trigger Input Voltage: 9 to 32 VDC. • Trigger Current: 2.0 mA (16 - 32 V); Per Input: 1.0 mA (9 - 16 V). Trouble Contact Rating: 5 A at 24 VDC. Auxiliary Power Output: Specific application power 500 mA maximum. Output Circuits: • +24 VDC filtered, regulated. • 3.0 A maximum for any one circuit. • Total continuous current for all outputs (stand -alone mode): — FCPS -2456: 4.0 A maximum. — FCPS -24S8: 6.0 A maximum. • Total short -term current for all outputs (NAC expander mode): — FCPS -24S6: 6.0 A maximum. — FCPS -24S8: 8.0 A maximum. Secondary Power (Battery) Charging Circuit: • Supports lead -acid batteries only. • Float- charge voltage: 27.6 VDC. dn- 6927:a • 04/30/09 — Page 1 of 2 Maximum current charge: 1.5 A. Maximum battery capacity: 18 AH. Applications Example 1: Expand notification appliance power an additional 6.0 A (FCPS -2456) or 8.0 A (FCPS- 24S8). Use up to four Class B (Style Y) outputs or four Class A (Style Z) outputs (using ZNAC -4). For example, the FACP notification appliance circuits will activate the FCPS when reverse - polarity activation occurs. Trouble conditions on the FCPS are sensed by the FACP through the notification appliance circuit. Example 2: Use the FCPS to expand auxiliary regulated 24- volt system power up to 4.0 A (FCPS -24S6) or up to 6.0 A (FCPS- 24S8). Both resettable and non - resettable power options are available. Resettable outputs are created by con- necting the resettable output from the FACP to one or both of the FCPS inputs. Example 3: Use addressable control modules to activate the FCPS instead of activating it through the FACP notification appliance circuits. This typically allows for mounting the FCPS at greater distances' away from the FACP while expanding system architecture in various applications. For example, an addressable control module is used to acti- vate the FCPS, and an addressable monitor module is used to sense FCPS trouble conditions. Local auxiliary power output from the FCPS provides power to the addressable control module. "NOTE: Addressable FACPs are capable of locating control and monitor modules at distances of up to 12,500 feet (3,810 meters). Sync Follower /Generator Note In some installations, it is necessary to synchronize the flash timing of all strobes in the system for ADA compliance. Strobes accomplish this by monitoring very short timing pulses on the NAC power which are created by the FACP. When installed at the end of a NAC wire run, the FCPS - 24S6/ -24S8 can track (i.e. "follow") the strobe synchronization timing pulses on the existing NAC wire run. This maintains the overall system flash timing of the additional strobes attaches to the FCPS. When the FCPS -24S6/ -2458 is configured (via DIP switch set- tings) as a "sync follower," the FCPS's NAC outputs track the strobe synchronization pulses present at the FCPS's sync input terminal. The pulses originate from an upstream FACP or other power supply. When the FCPS - 2456/ -24S8 are configured (via DIP switch settings) as a "sync generator," the FCPS's sync input termi- nals are not used. Rather, the FCPS is the originator of the strobe synchronization pulses on the FCPS's NAC outputs. In "sync generator" mode, the sync type (System Sensor, Whee- lock, or Gentex) is selectable via DIP switch settings. Standards and Codes The FCPS -24S6 and FCPS -2458 comply with the following standards: • NFPA 72 National Fire Alarm Code. • UL 864 Standard for Control Units for Fire Alarm Systems (NAC expander mode). • UL 1481 Power Supplies for Fire Alarm Systems. Agency Listings and Approvals These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. • UL Listed: S635, S674 • ULC Listed: S635 (FCPS -24S6C & FCPS- 24S8C) • CSFM Approved: 7315 - 0028:225 • MEA: 299 -02 -E • FM Approved Ordering Information FCPS -24S6: 6.0 A, 120 VAC remote charger power supply. Includes main printed circuit board, transformers, enclosure (15 "H x 14.5 "W x 2.75 "D [cm: 38.1 H x 36.83W x 6.985D]), and installation instructions. FCPS - 24S6C: Same as above, ULC - listed. FCPS- 24S6R: Same as FCPS -24S6 with red enclosure. FCPS- 24S6E: 6.0 A, 240 VAC remote charger power supply. Includes main printed circuit board, transformers, enclosure (15"H x 14.5 "W x 2.75 "D [cm: 38.1 H x 36.83W x 6.985D]), and installation instructions. FCPS -2438: 8.0 A, 120 VAC remote charger power supply. Includes main printed circuit board, transformers, enclosure (15 "H x 14.5"W x 2.75 "D [cm: 38.1 H x 36.83W x 6.985D]), and installation instructions. FCPS -24S8C Same as above, ULC- listed. FCPS- 24S8R: Same as FCPS -2458 with red enclosure. FCPS- 24S8E: 8.0 A, 240 VAC remote charger power supply. Includes main printed circuit board, transformers, enclosure (15 "H x 14.5 "W x 2.75 "D [cm: 38.1 H x 36.83W x 6.985D]), and installation instructions. ZNAC -4: Class A (Style Y) NAC option module. EOLR -1: 12/24 VDC end -of -line relay for monitoring four -wire smoke detector power. BAT-1270: Battery, 12 -volt, 7.0 AH (two required, see BAT Series data sheet DN- 6933). PS -1270: Battery, 12 -volt, 7.0 AH (two required, see PS Series data sheet DN -1109) System Sensor® and NOTIFIERO are registered trademarks of Honeywell International Inc. 02009 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. ISO 9001 We try to keep our product information up -to -date and accurate. We cannot cover all specific applications or anticipate all requirements. 9MIIE E AMIWEFAC E All specifications are subject to change without notice. lBI1LITY SISTEMS Made in the U.S. A. For more information, contact Notifier. Phone: (203) 484 -7161, FAX: (203) 4847118. www.notifier.com Page 2 of 2 — dn- 6927:a • 04/30109 COOPER Notification E*VE Finally, Design and Safety Meet... Description: The Wheelock® ExcederTm Series of notification appliances feature a sleek modem design thatwill please building owners with reduced total cost of ownership. Installers will benefit from its comprehensive feature list, including the most candela options in one appliance, low current draw, no tools needed for setting changes, voltage test points, 12/24 VDC operation, universal mounting base and multiple mounting options for both new and retrofit construction. The Wheelock® Excedef1m Series incorporates high reliability and high efficiency optics to minimize current draw allowing for a greater number of appliances on the notification appliance circuit. All strobe models feature an industry first of 8 candela settings on a single appliance. Models with an audible feature 3 sound settings (90, 95, 99 dB). All switches to change settings, can be set without the use of a tool and are located behind the appliance to prevent tampering. Wall models feature voltage test points to take readings with a voltage meter for troubleshooting and AHJ inspection. The Wheelock® Exceder"m Series of wall and ceiling notification appliances feature a Universal Mounting Base (UMB) designed to simplify the installation and testing of horns, strobes, and combination horn strobes. The separate universal mounting base can be pre -wired to allow full testing of circuit wiring before the appliance is installed and the surface is finished. It comes completewith a Contact Cover for protection againstdirt, dust, paint and damage to the contacts. The Contact Cover also acts as a shunting device to allow pre -wire testing for common wiring issues. The Contact Cover is polarized to prevent it from being installed incorrectly and prevents the appliance from being installed while it is on the UMB. When the Contact Cover is removed the circuit will show an open until the appliance is installed. The UMB allows for consistent installation and easy replacement of appliances if required. Wall models provide an optional locking screw for extra secure installation, while the ceiling models provide a captivated screw to prevent the screw from falling during installation. - Save up to 48% in current draw* . Up to 9 models now in 1 appliance - Save up to 14% cost of installation" USleek Modern Aesthetics Finger Slide Switches Voltage Test Points Multiple Voltages 3 Audible Settings 90, 95, 99 dB Compatibility and Requirements - Synchronize using the Wheelock® Sync Modules or panels with built -in Wheelock® Patented Sync Protocol - Compatible with UL "Regulated Voltage° using filtered VDC or unfiltered VRMS input voltage Strobes produce 1 flash per second over the "Regulated Voltage" range " Compared to competitive models "` Compared to previous models 8 Candela Settings Wall - 15/1575/30/75/95 /110/135/185 Ceiling - 15/30/60/75/95/115 /150/177 Universal Mounting Base U Ceiling and Wall Mounts to 5 Backbox Types (a Environmentally Friendly Low Current Draw Compatibility and Requirements - Synchronize using the Wheelock® Sync Modules or panels with built -in Wheelock® Patented Sync Protocol - Compatible with UL "Regulated Voltage° using filtered VDC or unfiltered VRMS input voltage Strobes produce 1 flash per second over the "Regulated Voltage" range " Compared to competitive models "` Compared to previous models NOTE: All CAUTIONS and WARNINGS are identified by the symbol A. All warnings are printed In bold capital letters. A WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT.. VISIT W W W.000PERNOTIFICATION.COM OR CONTACT COOPER NOTIFICATION FOR THE CURRENT INSTALLATION INSTRUCTIONS. FAILURE TO COMPLY WITH ANY OF THESE' INSTRUCTIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AN OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS. General Notes: General Notes: • Strobes are designed to flash at 1 flash per second minimum over their "Regulated Voltage Range ". • All candela ratings represent minimum effective strobe intensity based on UL Standard 1971. • Series ExcederStrobe products are Listed under UL Standards 1971 and 464 for indoor use with a temperature range of 32 °F to 120 °F (0•C to 49 °C) and, maximum humidity of 93% (t 2 %) UL 464 (t 5% UL 1971). Series Exceder homs are under UL Standard 464 for audible signal appliances (Indoor use only). Strobe Ratings Der UL Standard 1971 24 VDC / 24 FWR 1 12 VDC Model Regulated Voltage 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 Range VDC �T 8.0 -33.0 0.057 0.070 0.085 0.135 0.163 0.182 0.205 0.253 0.110 0.140 TC 8.0 -33.0 0.061 0.085 0.103 0.135 0.163 0.182 0.205 0.253 0.110 Strobe Ratings Der UL 1971 & UL 464 at 24 VDC 24 VDC 1 12 VDC Model Regulated Voltage 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 Range VDC HS 8.0 -33.0 0.082 0.095 0.102 0.148 0.176 0.197 0.242 0.282 0.125 0.159 HSC 8.0 -33.0 0.082 0.102 0.141 0.148 0.176 0.197 0.242 0.282 IM 0.125 24 VDC 1 12 VDC Model Regulated Voltage 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 Range VDC HS 8.0 -33.0 0.073 0.083 0.087 0.139 0.163 0.186 0.230 0.272 0.122 0.153 HSC 8.0 -33.0 0.073 0.087 0.128 0.139 0.163 0.186 0.23010 .272 0.122 24 VDC 1 12 VDC Model Regulated Voltage 15 15/75 j0.084 60 75 95 110 115 135 150 177 185 15 15/75 Range VDC HS 8.0 -33.0 0.065 0.075 0.136 0.157 0.184 0.226 0.267 0.120 0.148 HSC 8.0 -33.0 0.065 0.120 0.136 0.157 0.184 0.226 0.267 0.120 Horn Ratings per UL 464 Model Regulated Voltage Range VDC 99 dB 95 dB 90 dB HN 16 -33.0 0.064 0.044 0.022 HNC 16 -33.0 0.084 0.044 0.022 HN 1 8.0 -17.5 10.047 10.02610.017 HNC 1 8.0 -17.5 10.04710.02610.017 " UL max current rating is the maximum RMS current within the listed voltage range (16 -33 VDC for 24 VDC units). For strobes the UL max current is usually at the minimum listed voltage (16 VDC for 24 VDC units). For Audibles the max current is usually at the maximum listed voltage (33 VDC for 24 VDC units). For unfiltered ratings, see installation instructions. Specification & Ordering Information *12 VDC models feature 15 & 15/75 settings * *UMB = Universal Mounting Base NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance + with Cooper Wheelock inc., dba Cooper Notification standard `terms and; ppdkions. Sync w/ SM, Strobe Mounting Model Candela DSM or 12/24 VDC* Options PS-6 & PS-8 HSR , 15/1575/30175/95 /110/135/185 X X UMB'"' •_ HSW 15/1575/30/75/95 /110/135/185 X X UMB ** HSRC 15/30/60 /75/95/115/150/177 X X UMB ** HSWC 15/30/60 /75/95/115/150/177 X X UMB ** STR 15/1575/30 /75/95/110/135/185 X ttx X UMB ** STW . 15/1575/30 /75/95/110/135/185 X X UMB ** • STRC 15/30/60 /75/95/115/150/177 X UMB ** 15/30/60 /75/95/115/150/177 X X UMB ** • HNR X X UMB ** HNW X X UMB ** HNRC X X UMB ** HNWC •• X X UMB ** *12 VDC models feature 15 & 15/75 settings * *UMB = Universal Mounting Base NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance + with Cooper Wheelock inc., dba Cooper Notification standard `terms and; ppdkions. Architects and Engineers Specifications The notification appliances shall be Wheelock® ExcederTM Series HS Audible Strobe appliances, Series ST Visual Strobe appliances and Series HN Audible appliances or approved equals. The Series HS and ST Strobes shall be listed for UL Standard 1971 (Emergency Devices for the Hearing- Impaired) for Indoor Fire Protection Service. The Series HS and HN Audibles shall be UL Listed under Standard 464 (Fire Protective Signaling). All Series shall meet the requirements of FCC Part 15 Class B. All inputs shall be compatible with standard reverse polarity supervision of circuit wiring by a Fire Alarm Control Panel (FACP) with the ability to operate from 8 to 33 VDC. Indoor wall models shall incorporate voltage test points for easy voltage inspection. The Series HS Audible Strobe and ST Strobe appliances shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range and shall incorporate a Xenon flashtube enclosed in a rugged Lexan® lens. The Series shall be of low current design. Where Multi - Candela appliances are specified, the strobe intensity shall have 8 field selectable settings at 15, 15/75, 30, 75, 95, 110, 135, 185 candela for wall mount and 15, 30, 60, 75, 95, 115, 150, 177 candela for ceiling mount. The selector switch for selecting the candela shall be tamper resistant. The 15175 candela strobe shall be specified when 15 candela UL Standard 1971 Listing with 75 candela on -axis is required (e.g. ADA compliance). Appliances with candela settings shall show the candela selection in a visible location at all times when installed. The audible shall have a minimum of three (3) field selectable settings for dBA levels and shall have a choice of continuous or temporal (Code 3) audible outputs. The Series HS Audible Strobe, ST Strobe and Series HN Audible shall incorporate a patented Universal Mounting Base that shall allow mounting to a single -gang, double -gang, 4 -inch square, 3.5 -inch octal, 4 -inch octal or 100mm European type back boxes. Two wire appliance wiring shall be capable of directly connecting to the mounting base. Continuity checking of the entire NAC circuit prior to attaching any notification appliances shall be allowed. Product shall come with Contact Cover to protect contact springs. Removal of an appliance shall result in a supervision fault condition by the Fire Alarm Control Panel (FACP). The mounting base shall be the same base among all horn, strobe, horn strobe, wall and ceiling models. All notification appliances shall be backwards compatible. The Series HS and ST wall models shall have a low profile measuring 5.24" H x 4.58" W x 2.19" D. Series HN wall shall measure 5.24" H x 4.58" W x 1.6" D. The Series HSC and STC shall been round and have a low profile with a diameter of 6.68" x 2.63" D. Series HNC ceiling shall have a diameter of 6.68" x 1.50" D. When synchronization is required, the appliance shall be compatible with Wheelock @'s SM, DSM Sync Modules, Wheelock@ Power Supplies or other manufacturer's panels with built -in Wheelock@ Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation. If the sync protocol fails to operate, the strobe shall revert to a non - synchronized flash -rate and still maintain (1) flash per second over its Regulated Voltage Range. The appliance shall also be designed so that the audible signal may be silenced while maintaining strobe activation when used with Wheelock@ synchronization protocol. Wall Appliances — UL Standard 1971, UL Standard 464, California State Fire Marshal (CSFM) Ceiling Appliances — UL Standard 1971, UL Standard 464 WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 3 YEAR WARRANTY Exceder - Spec Sheet 08/09 Cooper Notification is Wheelock' ® SAFEPATW WAVES, COOPER Notification COOPER Wheelock Series NS Horn Strobes and Series NH Horns Series NS Description: The Series NS Horn Strobe Appliances are designed for indoor, wall and ceiling mount applications. The Series NH Horn and the horn portion of the Series NS include a selectable continuous horn tone or temporal pattern (Code 3) with selectable dBA settings of 90 or 95 dBA. Strobe options include 1575cd or the Wheelock patented Multi- Candela strobe with field selectable candela settings of 15/30175/110cd for wall mount and 15/30/75/95cd and 115/177cd for ceiling mount. These versatile Horn Strobe Appliances can be synchronized using the Wheelock SM, DSM Sync Modules or the PS- 24 -8MC Power Supply with the Wheelock patented Sync Protocol. Additionally, the audible may be silenced while maintaining strobe activation. All models of the Series NS and NH are designed for maximum performance, reliability and cost - effectiveness while meeting or exceeding the latest requirements of NFPA72 /ANSI 117.1/UFC and UL Standards 1971 and 464 as well as meeting ADA requirements concerning photosensitive epilepsy. The Wheelock patented 2 -Wire Series NS Horn Strobes and Series NH Horns offer more features with lower current draw than competitors. NS and NH Ceiling Mount Appliances will be available July 2006. I * APPRM E5946 151 -92 -E 7125- 0785:142 55391 Series NH Features: • Approvals include: UL Standard 1971, UL Standard 464, New York City (MEA), California State Fire Marshal (CSFM), Factory Mutual (FM) and Chicago (BFP). See approvals by model number in Specifications and Ordering Information • ADA/NFPA/UFC /ANSI compliant • Complies with OSHA 29, Part 1910.165 • Wall mount model Field Selectable Candela Setting 15130R5/110cd (24 VDC Multi - Candela models) or 1575cd in 12 or 24 VDC • Ceiling mount model Field Selectable Candela Setting 15/30/75/95cd and 115/177cd (24 VDC Multi - Candela models) • Selectable Continuous Horn or Temporal (Code 3) • 2 Selectable dBA settings of 90 and 95 dBA in both tones • Patented Universal Mounting Plate • 12 and 24 VDC models with UL "Regulated Voltage" using filtered DC or unfiltered VRMS input voltage • Wall and Ceiling Mount • Ceiling models with same look as Wheelock round ceiling strobes and speakers • NH horn is selectable 12 or 24 VDC in 1 appliance • The strobes can be synchronized using the Wheelock sync modules or power supplies with built in Sync Protocol • Fast installation with IN /OUT screw terminals using #12 to #18 AWG wires NOTE: All CAUTIONS and WARNINGS are identified by the symbol A. All warnings are printed in bold capital letters. A WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. VISIT WWW.COOPERWHEELOCK.COM OR CONTACT COOPER WHEELOCK FOR THE CURRENT INSTALLATION INSTRUCTIONS. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND /OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND /OR OTHERS. General Notes: • Strobes are designed to flash at 1 flash per second minimum over their "Regulated Voltage Range ". Note that NFPA -72 specifies a flash rate of 1 to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second. • All candela ratings represent minimum effective Strobe intensity based on UL Standard 1971. • Series NS Strobe products are listed under UL Standard 1971 for indoor use with a temperature range of 32 °F to 120 °F (0 °C to 49 °C) and maximum humidity of 93% (± 2 %). • Series NH homs are listed under UL Standard 464 for audible signal appliances (indoor use only). • "Regulated Voltage Range" is the newest terminology used by UL to identify the voltage range. Prior to this change UL used the terminology "Listed Voltage Range ". Table 1: Ratings Per UL Standard 1971 Model Input Voltage VDC Regulated Voltage Range VDC /FWR Strobe Candela (CD) NS -24MCW 24 16.0-33.0 15/30175/110 NS- 241575W 24 16.0-33.0 15 (75 on Axis) NS- 121575W 12 8.0-17.5 15 (75 on Axis) NS -24MCC 24 16.0-33.0 15/30/75/95 NS- 24MCCH 24 16.0 - 33.0 115/177 Table 2: dBA Ratings for Series NS /NH Horn Series NS /NH 24 VDC Audible Reverberant dBA Anechoic dBA NH -12/24 NS- 241576W @ 1Oft per UL 464 @ 10 ft Description Volume 12 24 12 24 110cd 15cd 30cd 75cd VDC VDC VDC VDC Continuous High 83 87 89 95 Horn Low 76 81 84 90 Code 3 High 79 82 89 95 Low 72 76 84 90 Horn Table 3: UL Max Current* Series NS /NH 24 VDC Audible Wall Mount Strobe Models Ceiling Mount Strobe Models NH -12/24 NS- 241576W NS -24MCW NS -24MCC NS- 24MCCH @24VDC 15/75cd 15cd 30cd 75cd 110cd 15cd 30cd 75cd 95cd 115cd 177cd High (95) dBA 24VDC 0.044 0.104 0.074 0.107 0.184 0.244 0.082 0.124 0.209 0.275 0.350 0.477 Low (90) dBA 24VDC 0.018 0.096 0.066 0.101 0.177 0.232 0.071 0.114 0.201 0.261 0.306 0.429 Series NS /NH 12VDC Audible Wall Mount * RMS current ratings are per UL average RMS method. UL max current rating is the maximum RMS current within the listed voltage range (16 -33v for 24v units). For strobes the UL max current is usually at the minimum listed voltage (16v for 24v units). For audibles the max current is usually at the maximum listed voltage (33v for 24v units). For unfiltered FWR ratings, see installation instructions. NH -12/24 Aud /Strobe @12V NS- 121575W High (89) dBA 12 VDC 0.021 0.220 Low (84) dBA 12VDC 1 0.012 0.210 Wiring Diagrams" NS /NH APPLIANCE FROM TO NEXT PRECEDING FEATURE 24 VDC SM F APPLIANCE APPLIANCE, SM /DSM, MEA CSFM - STROBE BFP OR EOLR PS- 12/24 -8M P, A NAC X - Circuit PS- 12/24 -8CP OR C X X X NS- 24MCW -FW FACP + - X SIGNAL NS AND NH APPLIANCES SYNCHRONIZED WITH SM MODULE SINGLE CLASS "B" NAC CIRCUIT WITH AUDIBLE SILENCE FEATURE 24 VDC SM F Agency Approvals + STROBE MEA CSFM - STROBE BFP Strobe 9404 A NAC X - Circuit NS a NH C X X X NS- 24MCW -FW +Audible P X EOLR - Audible 'Audible X NAC X X Circuit 7806 SPECIFICATION & ORDERING INFORMATION NOTE: NS /NH must be set on Code 3 horn tone to achieve synchronized temporal (Code 3) tone. Refer to installation instruction (1283983, P83600 respectively). # For detail using SM or DSM Sync Module refer to Data Sheet S3000 or Installation Instructions P83123 for SM and P83177 for DSM. For wiring information on the power supplies refer to Installation Instructions P84515 for PS- 12/24 -8CP and P84333 for PS- 12/24 -8MP. Model Number Order Code Strobe Candela Sync w/ SM, DSM or PS- 24-8MC 24 VDC 12 VDC Mounting Options# Agency Approvals UL MEA CSFM FM BFP NS- 24MCW -FR 9404 15/30/75/110 X X - B,D,E,F,G,H,J,N,O,R,X X X X X X NS- 24MCW -FW 9405 15/30/75/110 X X - B,D,E,F,G,H,J,N,O,R,X X X X X X NS- 241575W -FR 7806 15 (75 on Axis) X X - B,D,E,F,G,H,J,N,O,R,X X X X X X NS- 241575W -FW 7811 15 (75 on Axis) X X - B,D,E,F,G,H,J,N,O,R,X X X X X X NS- 121575W -FR 7816 15 (75 on Axis) X — X B,D,E,F,G,H,J,N,O,R,X X X X X X NS- 121575W -FW 7818 15 (75 on Axis) X - X B,D,E,F,G,H,J,N,O,R,X X X X X X NH- 12/24 -R 7449 - X X X B,D,E,F,G,H,J,N,O,R,X X X X X X NH- 12/24 -W 7500 - X X X B,D,E,F,G,H,J,N,O,R,X X X X X X NS- 24MCC -FR 3754 15/30175/95 X X - E X X NS- 24MCC -FW 3753 15/30/75/95 X X - E X X NS- 24MCCH -FR 3756 1151177 X X - E X * X NS- 24MCCH -FW 3755 115/177 X X - E X X NH- 12/24R -R 3752 - X X B,D,E,F,G,H,J,N,O,R,X X * X NH- 12/24R -W 3751 X X B,D,E,F,G,H,J,N,O,R,X X * * X NS and NH Ceiling Mount Appliances will be available July 2006. *Pending Note: Models are available in Red or White. Contact Customer Service for Order Code and Delivery. #Refer to Data Sheet 57000 for Mounting Options NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Wheelock Inc. standard terms and conditions. ARCHITECTS AND ENGINEERS SPECIFICATIONS The audible /visual notification appliances shall be Wheelock Series NS Horn Strobe appliances and Series NH Horn appliances or approved equals. The Series NS appliances shall meet and be listed for UL Standard 1971 (Emergency Devices for the Hearing- Impaired for Indoor Fire Protection Service). The Series NH Horn shall be UL Listed under Standard 464 (Fire Protective Signaling). The horn strobe shall be listed for indoor use and shall meet the requirements of FCC Part 15 Class B. All inputs shall be compatible with standard reverse polarity supervision of circuit wiring by the Fire Alarm Control Panel (FACP). The audible portion of the appliance shall have a minimum of two (2) field selectable settings for dBA levels (90 and 95 dBA) and shall have a choice of continuous or temporal (Code 3) audible outputs. The strobe portion of the appliance shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range and shall incorporate a Xenon flashtube enclosed in a rugged Lexan lens. The Series NS shall be of low current design. Where wall mount, Multi - Candela appliances are specified, the strobe intensity shall have field selectable settings and shall be rated per UL Standard 1971 for 15/30/75/110 candela. Where ceiling mount, Multi- Candela appliances are specified, the strobe intensity shall have field selectable settings and shall be rated per UL Standard 1971 for 15/30/75/95 candela or 115 /177 candela. The selector switch for selecting the candela setting shall be tamper resistant. The 1575 candela strobe shall be specified when 15 candela UL Standard 1971 Listing with 75 candela on -axis is required (e.g. ADA compliance). When synchronization is required, the appliance shall be compatible with the Wheelock SM, DSM Sync Modules orthe Wheelock PS -24- 8MC Power Supplies with built -in Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation. If the sync module or Power Supply fails to operate, (i.e., contacts remain closed), the strobes shall revert to a non - synchronized flash - rate. The appliance shall also be designed so that the audible signal may be silenced while maintaining strobe activation. The Series NS Horn Strobes and NH horn shall incorporate a Patented Universal Mounting Plate that shall allow mounting to a single - gang, double -gang, 4 -inch square, 1 00m European type backboxes, orthe SHBB Surface Backbox. If required, an NATP (Notification Appliance Trimplate) shall be provided. All notification appliances shall be backward compatible. NJO INN 273 Branchport Avenue Long Branch, NJ 07740 Phone: (800) 631 -2148 Fax: (732) 222 -2588 www.cooperwheelock.com WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 3 YEAR WARRANTY Made in USA S2100 NS /NH 08/06 COOPER Notification Series RSS and RSSP Strobes and Strobe Plates F IRF xy f r3 E Series RSS Series RSS Series RSSWP RSS Round Description The Wheelock patented Series RSS Strobe Appliances and Series RSSP Strobe Plates have lower current draw while maintaining outstanding performance, reliability and cost effectiveness. These versatile appliances will satisfy virtually all requirements for indoor, wall or ceiling mount applications. Strobe options for wall mount models include 1575 or the Wheelock Patented MCW multi - candela strobe with field selectable candela settings of 15/30/75/110cd or the high intensity MCWH strobe with field selectable 135/185cd. Ceiling mount models include the patented MCC multi - candela ceiling strobe with field selectable intensities of 15/30n5195cd or the high intensity MCCH strobe with field selectable 115/177cd. All models may be synchronized using the Wheelock SM, DSM Sync Modules, Wheelock Power Supplies or other manufacturers panels incorporating the Wheelock Patented Sync Protocol. Synchronized strobes can eliminate possible restrictions on the number of strobes in the field of view. Wheelock's synchronized strobes offer an easy way to comply with ADA recommendations concerning photosensitive epilepsy as well as meeting the requirements of NFPA 72. The Wheelock Series RSS Strobes employ a Patented Integral Strobe Mounting Plate that can be mounted to a single gang, double gang, 4" square, 1 00m European backboxes or the SHBB surface backbox. If the flush backbox has side or top space between it and the finished wall, the NATP (Notification Appliance Trimplate) may be used. It provides an additional .65" of trim for the Appliance. An attractive cover plate is provided for a clean, finished appearance on all models. The Series RSSP Multi - Candela Strobe Plates are a cost effective way to retrofit required wall strobe appliances to bells, horns, chimes, multitones orspeakers and easily mounts to standard 4" backboxes or for surface mount use with the Wheelock SBL2 surface backbox. FECIIY6 WYOPo( U � Ik FM ® M EA APPROVED 55391 151 -92 -E 7125-0785:141 7300.0785:154 Features • Approvals include: UL Standard 1971, New York City (MEA), California State Fire Marshal (CSFM), Factory Mutual (FM), and Chicago (BFP) See approvals by model in Specifications and Ordering Information • ADA/NFPA/UFC /ANSI compliant. Meets OSHA 29 Part 1910.165 • Wall mount Multi- Candela models are available with Field Selectable Candela Settings of 15/30/ 75/110cd or 135/185cd. Single Candela models are available in 1575cd • Ceiling mount Multi - Candela models are available with field selectable candela settings of 15/30/75/95cd or 115/177cd. (Round or Square) • Strobes produce 1 flash per second over the regulated voltage range • 12 and 24 VDC models with wide UL "Regulated Voltage" us- ing filtered (DC) or unfiltered VRMS input voltage • Synchronize using the Wheelock sync modules or panels with built -in Wheelock Patented Sync Protocol • Fast installation with IN /OUT screw terminals using #12 to #18 AWG wire For Weatherproof Series RSS See Datatsheet S9004 NOTE: All CAUTIONS and WARNINGS are identified by the symbol A. All warnings are printed in bold capital letters. A- WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. VISIT WWW.COOPERWHEELOCK.COM OR CONTACT COOPER WHEELOCK FOR THE CURRENT INSTALLATION INSTRUCTIONS. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND /OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND /OR OTHERS. General Notes: • Strobes are designed to flash at 1 flash per second minimum over their "Regulated Voltage Range ". Note that NFPA -72 specifies a flash rate of 1 to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second. • All candela ratings represent minimum effective Strobe intensity based on UL Standard 1971. • Series NS Strobe products are listed under UL Standard 1971 for indoor use with a temperature range of 32 °F to 120 °F (0 °C to 49 °C) and maximum humidity of 93% (± 2 %). • Series NH horns are listed under UL Standard 464 for audible signal appliances (Indoor use only). • "Regulated Voltage Range" is the newest terminology used by UL to identify the voltage range. Prior to this change UL used the terminology "Listed Voltage Range ". Table 1: Average RMS Current* Product RSS/RSSP - Wall Mount Ceiling Mount RSS /RSSP 24VDC 241575W 24MCW 24MCWH 24MCC 24MCCH Models Chimes CH70 OUT +our1 +IN1 RSS RSS RSS \ FACP 1575cd 15cd 30cd 75cd 110cd 135cd 185cd 15cd 30cd 75cd 95cd 11 5c 177cd UL max* 0.090 0.060 0.092 0.165 0.220 0.300 0.420 0.065 0.105 0.189 0.249 0.300 0.420 RSS /RSSP RSS /RSSP 24VDC Wall Mount Models * RMS current ratings are per UL average RMS method. UL max current 121575W rating is the maximum RMS current within the listed voltage range (16 -33v for 24v units). For strobes the UL max current is usually at the minimum 12 vdc 0.152 listed voltage (16v for 24v units). For audibles the max current is usually at the maximum listed voltage (33v for 24v units). For unfiltered FWR ratings, UL max* 0.255 see installation instructions. Table 2: Audibles /Speakers for RSSP Strobe Plate Product Series Multitone Appliances AMT, MT Horns AH, NH, HS Motor Bells MB- G6 /G10 Speakers ET- 1010/1080, E70, ET70 Chimes CH70 SERIES RSS/RSSP APPLIANCES SYNCHRONIZED WITH DSM MODULE SINGLE CLASS "A" NAC CIRCUIT DSM STROBE NAC SYNC 0 CIRCUIT OUT +our1 +IN1 RSS RSS RSS \ FACP MINUS 1 + AUDIBLE O MINUS 2 +IN2 RSS RSS RSS TROBE NAC +OUi2 CIRCUIT RETURN Wiring Diagrams 11 SERIES RSS /RSSP APPLIANCE FROM + + TO NEXT PRECEDING - APPLIANCE APPLIANCE, SYNC OR EOLR MODULE, POWER SUPPLY OR FACP SERIES RSS /RSSP APPLIANCES SYNCHRONIZED WITH MULTIPLE DSM MODULES DSM #1 Sync Strobe NAC Cir. m + RSS RSS F DSM #2 A Strobe NAC Cir. m + RSS RSS C DSM #3 P Sync Strobe NAC Or. + RSS RSS DSM Interconnecting wiring shown. Maximum of twenty (20) STROBE /PLATE ASSEMBLY AUDIBLE & VISIBLE APPLIANCE OPERATE IN UNISON TO NEXT FROM + + APPLIANCE PRECEDING - - OR EOLR APPLIANCE, SYNC MODULE, POWER SUPPLY OR FACP STROBE AUDIBLE STROBE /PLATE ASSEMBLY SM MODULE SINGLE AUDIBLE & VISIBLE APPLIANCE OPERATE INDEPENDENTLY FROM 1 TO NEXT PRECEDING APPLIANCE OR C r T APPLIANCE _ FACP Color WHITE Mounting Options * ** OR EOLR 11 FROM T - 1 r - STROBE MEA + TO NEXT PRECEDING St rob e RSS - 24MCW -FR STROBE OR STROBE, SYNC - - Tj l r - - A - - - EOLR MODULE, POWER X Circuit SUPPLY OR FACP RSS RSS X C STROBE APPLIANCE * For detail using SM or DSM Sync Module refer to Data Sheet S3000 or Installation Instructions P83123 for SM and P83177 for DSM. Forwiring information on the power supplies refer PS- 24 -8MC. Specifications and Ordering Information SERIES RSS /RSSP APPLIANCE SYNCHRONIZED WITH SM MODULE SINGLE CLASS "B" NAC CIRCUIT Ceiling Mount SM Strobe Candela C r 12 VDC + STROBE Color WHITE Mounting Options * ** Square or Round Agency Approvals - STROBE MEA CSFM FM St rob e RSS - 24MCW -FR 940 X A NAC 15/30/75/110 X X Circuit B,D,E,F,G,H,J,N,O,R,X RSS RSS X C X X X RSS - 24MCW -FW 9401 X Audible X 15/30175/110 P &SEOLR X B,D,E,F,G,H,J,N,O,R,X Square X Audible SERIES RSS /RSSP APPLIANCES SYNCHRONIZED WITH PS- 12/24 -8CP or PS- 12/24 -8MP Series PS- 12/24 -8MP aOUTPUTS AS RSS EOLR F 1-4 4 -CLASS A "B" OR AS RSS C 2 -CLASS A" P AS RSS Series PS -12124 -81VIP Model Order Code Wall Mount Ceiling Mount Non- Sync y Strobe Candela 24 VDC 12 VDC Color RED Color WHITE Mounting Options * ** Square or Round Agency Approvals UL MEA CSFM FM BFP RSS - 24MCW -FR 940 X X 15/30/75/110 X X - B,D,E,F,G,H,J,N,O,R,X Square X X X X X RSS - 24MCW -FW 9401 X X 15/30175/110 X - X B,D,E,F,G,H,J,N,O,R,X Square X X X X X RSS'241575W - -FR 7471 X X 15 (75 on Axis) X - X B,D,E,F,G,H,J,N,O,R,X Square X X X X X RSS- 241575W -FW 7788 X X 15 (75 on Axis) X X B,D,E,F,G,H,J,N,O,R,X Square X X X X X RSS- 121575W -FR 7476 X X 15 (75 on Axis) X X - B,D,E,F,G,H,J,N,O,R,X Square X X X X X RSS- 121575W -FW 7468 X - X 15 (75 on Axis) X X B,D,E,F,G,H,J,N,O,R,X Square X X X X X RSS - 24MCC -FW 3158 - X X 15/30175/95 X X B,D,E,F,G,H,J,N,O,R,X Square X X X X RSS - 24MCC -FR 3157 - X X 15/30/75/95 X X - B,D,E,F,G,H,J,N,O,R,X Square X X X X RSS- 24MCCR -FW 3160 - X X 15130/75/95 X X B,D,E,F,G,H,J,N,O,R,X Round X X X X RSS- 24MCCH -FW 3461 - X X 115/177 X X B,D,E,F,G,H,J,N,O,R,X Square X X X X RSS- 24MCCHR -FW 3463 - X X 115/177 X - X B,D,E,F,G,H,J,N,O,R,X Round X X X X RSS - 24MCWH -FR 3465 X X 135/185 X X B,D,E,F,G,H,J,N,O,R,X Square X X X X RSS - 24MCWH -FW 3464 X X 135/185 X X B,D,E,F,G,H,J,N,O,R,X Square X X X X RSSWP- 2475W -FR ** 9013 X X 180@ 77 -F 75@ -31 -F X X X - B,D,E,F,G,H,J,N,O,R,X Square X X X X RSSWP - 2475W -FW`* 3034 X - X 180@ 77 *F 75@ -31 -F X X - X B,D,E,F,G,H,J,N,O,R,X Square X X X X RSSP- 121575W -FR 7798 X X 15 (75 on Axis) - X X D,E,Z Square X X X X X RSSP - 24MCW -FR 9402 X X 1 15/30/75/110 X X D,E,Z Square X X X X X RSSP- 241575W -FR 7793 X - X 15 (75 on Axis) - - X D,E,Z Square X X X X X *PENDING All models sync with Wheelock SM, DSM or PS- 12/24 -8CP or PS-1 2/24-8 M P. # Models are available in either Red or White. Call Customer Service for Order Code & Delivery. * *For Weatherproof Series RSS Strobe specifications see data sheet S9004. ** *Refer to data sheet S7000 for mounting options. nrcnirecrs ana The visual notification appliances shall be Wheelock Series RSS Strobe Appliances or approved equals. The Series RSS shall meet and be listed for UL Standard 1971 (Emergency Devices for the Hearing- Impaired) for Indoor Fire Protection Service. The strobe shall be listed for indoor use and shall meet the requirements of FCC Part 15 Class B. The strobe appliances shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range and shall incorporate a Xenon flashtube enclosed in a rugged Lexan® lens. All inputs shall be compatible with standard reverse polarity supervision of circuit wiring by a Fire Alarm Control Panel (FACP). When Strobe Plates are to be installed, they shall be the Wheelock Series RSSP Strobe Plate and shall have the same electronic circuitry as the Wheelock Series RSS. The Series RSS Strobe shall be of low current design. Where Multi - Candela appliances are specified, the strobe intensity shall have field selectable settings and shall be rated per UL Standard 1971 at 15/30/75/110cd or 135/185cd for wall mount and 15/30/75/95cd or 115/177cd for ceiling mount. The selector switch for selecting the candela shall be tamper resistant. The 1575 candela strobe shall be specified when 15 candela UL Standard 1971 Listing with 75 candela on axis is required (e.g. ADA compliance). When synchronization is required, the appliance shall be compatible with Wheelock's SM, DSM Sync Modules, Wheelock Power Supplies or other manufacturers panels with built -in Wheelock Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation. If the sync module or Power Supply fails to operate, (i.e., contacts remain dosed), the strobe shall revert to a non - synchronized flash rate. The strobes shall be designed for indoor surface of flush mounting. The Series RSS Strobe Appliances shall incorporate a Patented, Integral Strobe Mounting Plate that shall allow mounting to single - gang, double -gang, 4 -inch square, 1 00m European type backboxes, or the SHBB Surface Backbox. If required, an NATP (Notification Appliance Trimplate) shall be provided. An attaching cover plate shall be provided to give the Appliance and attractive appearance. The Appliance shall not have any mounting holes or screw heads visible when the installation is completed. The Series RSSP Multi - Candela or single candela Strobe Plate shall mount to either a standard 4 inch square backbox forflush mounting, or the Wheelock SBL2 backbox for surface mounting. All notification appliances shall be backward compatible. NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Wheelock, Inc. standard terms and conditions. WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 3 YEAR WARRANTY Made in USA SO410 RSS /RSSP 02/08 i Cooper Notification is Wheelock* ® SAFEPATH` WAVE a COOPER Notification NBG.12LX Addressable Manual Pull Station General The Notifier NBG -12LX is a state -of- the -art, dual - action (i.e., requires two motions to activate the station) pull station that includes an addressable interface for any Notifier intelligent control panel except FireWarden series panels, and the NSP- 25 panel. Because the NBG -12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm. Features • Maintenance personnel can open station for inspection and address setting without causing an alarm condition. • Built -in bicolor LED, which is visible through the handle of the station, flashes in normal operation and latches steady red when in alarm. • Handle latches in down position and the word "ACTIVATED" appears to clearly indicate the station has been operated. • Captive screw terminals wire -ready for easy connection to SLC loop (accepts up to 12 AWG /3.25 mm2 wire). • Can be surface mounted (with SB -10 or SB -1 /0) or semi - flush mounted. Semi -flush mount to a standard single - gang, double -gang, or 4" (10.16 cm) square electrical box. • Smooth dual -action design. • Meets ADAAG controls and operating mechanisms guide- lines (Section 4.1.3[13]); meets ADA requirement for 5 lb. maximum activation force. • Highly visible. • Attractive shape and textured finish. • Key reset. • Includes Braille text on station handle. • Optional trim ring (BG12TR). • Meets UL 38, Standard for Manually Actuated Signaling Boxes. • Up to 99 NBG -12LX stations per loop on CLIP protocol loops. • Up to 159 NBG -12LX stations per loop on FlashScan® pro- tocol loops. • Dual -color LED blinks green to indicate normal on FlashS- can® systems. Construction Shell, door, and handle are molded of durable polycarbonate material with a textured finish. Specifications • Shipping Weight: 9.6 oz. (272.15 g) • Normal operating voltage: 24 VDC. • Maximum SLC loop voltage: 28.0 VDC. • Maximum SLC loop current: 375 NA. • Temperature Range: 32 °F to 120 °F (0 °C to 49 °C) • Relative Humidity: 10% to 93% (noncondensing) • For use indoors in a dry location DN- 6726:C1 • H -240 (�J NOT 1 F 1 E R� by Honeywell The NBG -12LX Addressable Manual Pull Station Installation The NBG -12LX will mount semi -flush into a single -gang, dou- ble -gang, or standard 4" (10.16 cm) square electrical outlet box, or will surface mount to the model SB -10 or SB -1 /0 sur- face backbox. If the NBG -12LX is being semi -flush mounted, then the optional trim ring (BG12TR) may be used. The BG12TR is usually needed for semi -flush mounting with 4" (10.16 cm) or double -gang boxes (not with single -gang boxes). Operation Pushing in, then pulling down on the handle causes it to latch in the down /activated position. Once latched, the word "ACTI- VATED" (in bright yellow) appears at the top of the handle, while a portion of the handle protrudes from the bottom of the station. To reset the station, simply unlock the station with the key and pull the door open. This action resets the handle; clos- ing the door automatically resets the switch. Each manual station, on command from the control panel, sends data to the panel representing the state of the manual switch. Two rotary decimal switches allow address settings (1 — 159 on FlashScan® systems, 1 — 99 on CLIP systems). Architectural /Engineering Specifications Manual Fire Alarm Stations shall be non - coded, with a key - operated reset lock in order that they may be tested, and so designed that after actual Emergency Operation, they cannot be restored to normal except by use of a key. An operated sta- tion shall automatically condition itself so as to be visually detected as activated. Manual stations shall be constructed of red - colored polycarbonate material with clearly visible operat- ing instructions provided on the cover. The word FIRE shall appear on the front of the stations in white letters, 1.00 inches (2.54 cm) or larger. Stations shall be suitable for surface mounting on matching backbox SB -10 or SB -I /O; or semi -flush mounting on a standard single -gang, double -gang, or 4" DN- 6726:C1 •8/16/10 —Page 1 of 2 (10.16 cm) square electrical box, and shall be installed within the limits defined by the Americans with Disabilities Act (ADA) or per national /local requirements. Manual Stations shall be Underwriters Laboratories listed. Manual stations shall connect with two wires to one of the con- trol panel SLC loops. The manual station shall, on command from the control panel, send data to the panel representing the state of the manual switch. Manual stations shall provide address setting by use of rotary decimal switches. The loop poll LED shall be clearly visible through the front of the station. The LED shall flash while in the normal condition, and stay steadily illuminated when in alarm. Product Line Information NBG -12LX: Dual- action addressable pull station. Includes key kicking feature. SB -10: Surface backbox; metal. SB -UO: Surface backbox; plastic. BG12TR: Optional trim ring. 17021: Keys, set of two. NY- Plate: New York City trim plate Agency Listings and Approvals In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in pro- cess. Consult factory for latest listing status. • UL / CUL Listed: S692 (listed for Canadian and non -Cana- dian applications) • MEA:67 -02 -E • CSFM:7150- 0028:0199 • FDNY: COA #6038 (NFS2 -640), COA #6058 (NFS2 -3030) • BSMI: C1313066760047 • U.S. Coast Guard: 161.002/23/3 (AFP -200); 161.002/27/3 (AM- 2020 /AFP -1010; 161.002/42/1 (NFS -640) • Lloyd's Register: 02/6007 (NFS -640); 94/60004 (E2) (AFP -200); 03/60011 (E1); 07/60007 (NFS2 -3030) • FM Approved Patented: U.S. Patent No. D428,351; 6,380,846; 6,314,772; 6,632,108. Notifier® and FlashScan® are a registered trademarks of Honeywell International Inc. 02010 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. 1S0 9oo� This document is not intended to be used for installation purposes. We try to keep our product information up -to -date and accurate. We cannot cover all specific applications or anticipate all requirements. 9�II�li li All specifications are subject to change without notice. ONALITY SYSTEMS Made in the U.S. A. For more information, contact Notifier. Phone: (203) 484 -7161, FAX: (203) 484 -7118. www.notifier.com Page 2 of 2 — DN- 6726:C1 •8/16/10 + ri (ONOTIFIEW Division of Pittway Corporation MMX -101 MONITOR MODULE INSTALLATION INSTRUCTIONS GENERAL MMX -101 Monitor Modules provide a two -wire, Style B (Class B) initiating circuit for normally -open (N.O.) contact fire alarm and supervisory devices. The MMX -101 is a compact unit that can be installed in a single gang junction box behind the monitored unit. Its small size and weight allow it to be installed without rigid mounting. NOTICE: This manual should be left with the owner /user of this equipment. INSTALLATION CAUTION Do NOT connect circuit wiring to control unit or modules or apply any power to any part of the system until after the circuit test has been performed. All wiring must be installed using the proper wire size and be in compliance with the National Electrical Code, all applicable local codes, and requirements of the authority having jurisdiction. 1. Connect the red and black wires to the positive ( +) and negative ( —) loop power leads of the control panel signal- ing line circuit (SLC), as indicated in Figure 2. 2. Connect the violet ( +) and yellow ( —) wires to a two -wire, normally -open initiating device. 3. Set the module address in accordance with system requirements. A given module can be set to any address between 00 and 99. 4. Install the module in the desired mounting location.\ CIRCUIT TEST For circuit test procedure, refer to Notifier Document 15531. UL Listed Compatible Control Panel Notifier c.) AM2020 , TO NEXT DEVICE NOTES: iD THE INITIATING CIRCUIT IS CURRENT LIMITED TO 290 pAMP MAX. 1 DVOC NOM. Q2 DETECTION LOOP PROVIDES THE FOLLOWING SERVICES: - FIRE, AUTOMATICIMANUAL WATERFLOW ALARM SERVICE WITH N.O. CONTACT DEVICES - SPRINKLER SUPERVISION WITH N.O. CONTACT DEVICES O DO NOT MIX SERVICES ® INITIATING CIRCUIT LINE REQUIREMENTS MAX. LENGTH -2500' 47KEOL MAX. RESISTANCE -40 OHMS A2143 -00 Figure 1. Figure 2. Typical two -wire, Style B Initiating Circuit Configuration of an MMX -101 Monitor Module N500 -02 -00 156- 420 -05 Notifier, 12 Clintonville Road, Northford, CT 06472 January 20, 2000 DN -6755 - K -150 N OTI F 1 E R0 PAM -1 and PAM -2 FIRE SYSTEMS Multi - Voltage Relay Modules Section: Miscellaneous GENERAL Air Products & Controls, Inc. PAM -1 and PAM -2 Multi -Volt- age Relay Modules are encapsulated multi - voltage de- vices. The PAM -1 relay provides 10.0 Amp Form -C con- tacts and may be energized by one of three input voltages: 24 VAC, 24 VDC, or 115 VAC. The PAM -2 relay provides 7.0 Amp Form -C contacts and may be energized by one of two input voltages: 12 VDC or 24 VDC. A red LED is provided on both models. When illuminated, it indicates the relay coil is energized. Either model may be mounted by using the double -sided adhesive tape, the self - drilling screw, or by placing loosely in a backbox. PAM -1 and PAM -2 Relay Modules are ideal for applica- tions where remote relays are required for control or status feedback. They are suitable for use with HVAC, tempera- R rF ture control, fire alarm, security, energy management, and lighting control systems. SPECIFICATIONS Power requirements: for PAM -1; 0.015 Amps per posi- tion @ 24 VDC, 24 VAC, 115 VAC; for PAM -2: 0.015 Amps per position @ 12 VDC or 24 VDC. Relay: UL- recognized SPDT. Contact rating, PAM -1: 10.0 A @ 115 VAC; 7.0 A @ 28 VDC; 250 pA @ 5 VDC. Contact rating, PAM -2: 7.0 A @ 115 VAC; 7.0 A @ 28 VDC; 250 pA @ 5 VDC. Ambient temperature range: —58 °F to +185 °F ( -50 °C to +85 °C). Dimensions: 1.500" (38.100 mm) high x 1.000" (25.400 mm) wide x 0.875" (22.225 mm) deep, with 12" (304.8 mm) wire leads @ 18 AWG (0.75 mm2). WIRING DIAGRAMS ME MEW M EA California State Fire ® 73 -92 -E Marshal Vol. XXI 7300- 1004:101 S3403 PRODUCT LINE INFORMATION PAM -1 Single SPDT relay with LED, double -sided adhesive tape, mounting screw, 12" (304.8 mm) leads and six wire -nuts. Powerrequire- ments: 0.015 Amps per position @ 24 VDC, 24 VAC, 115 VAC. Contact rating: 10.0 A @115 VAC, 7.0A @28 VDC, 250pA @5 VDC. PAM -2 Single SPDT relay with LED, double -sided adhesive tape, mounting screw, 12" (304.8 mm) leads and six wire -nuts. Powerrequire- ments: 0.015 Amps per position @ 12 VDC or 24 VDC. Contact rating: 7.0 A @ 115 VAC; 7.0 A @ 28 VDC; 250 pA @ 5 VDC. Relay- Energized LED WHT BLU C BLK 0 YEL NC 10.0 Amp Contacts RED ORG NO L +__ 115 VAC @ 0.015 Amp 24 VAC @0.015 Amp 24 VDC @ 0.015 Amp 4 AT LEFT: Installation wiring for PAM -1 model. BELOW: Installation wiring 1w, for PAM -2 model. Relay- Energized LED OV ( —) WHT BLU 0 C +24V GRY YEL NC 7.0 Amp Contacts +12V RED ORG NO This document is not intended to be used for installation purposes. try to keep our I�O �oo� product information up -to -date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact NOTIFIER. Phone: (203) 484 -7161 FAX: (203) 484 -7118 _ tHIgIIE�Ni 8 AIANYBI61111110 N OTI FI E R 12 Clintonville Road, Northford, Connecticut 06472 DN -6755 • 01/20/00 — Page 1 of 1 FSP -851 and FSP -851 T Intelligent Plug -In Photoelectric Smoke Detectors with FlashScan® General Notifier 851 Series intelligent plug -in smoke detectors with integral communication provide features that surpass conven- tional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously moni- tored and reported to the panel. Point ID capability allows each detector's address to be set with decade address switches, providing exact detector location for selective main- tenance when chamber contamination reaches an unaccept- able level. The FSP -851 photoelectric detector's unique optical sensing chamber is engineered to sense smoke pro- duced by a wide range of combustion sources. Dual electronic thermistors add 135 °F (57 °C) fixed - temperature thermal sens- ing on the FSP -851T. FSP -851 and FSP -851T detectors are compatible with all Notifier intelligent Fire Alarm Control Pan- els (FRCP). FlashScan® (U.S. Patent 5,539,389) is a communication pro- tocol developed by Notifier that greatly increases the speed of communication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices in the group has new information, the panel's CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of ear- lier designs. Features • Sleek, low- profile design. • Addressable - analog communication. • Stable communication technique with noise immunity. • Low standby current. • Two -wire SLC connection. • FlashScan (NFS -320, NFS -640, NFS2 -640, NFS -3030, NFS2 -3030) and classic CLIP systems (AFP -100, AFP - 200, AFP -300, AFP -400, NFS -640, AM2020 /AFP1010, NFS -3030) compatible. • Rotary, decimal addressing (1 -99 on CLIP systems, 1 -159 on FlashScan systems). • Optional remote, single -gang LED accessory. • Dual LED design provides 3600 viewing angle. • Visible bi -color LEDs blink green every time the detector is addressed, and illuminate steady red on alarm (F/ashScan systems only). • Remote test feature from the panel. • Walk test with address display (an address on 121 will blink the detector LED: 12- [pause]- 1 (FlashScan systems only). • Built -in functional test switch activated by external magnet. • Built -in tamper- resistant feature. • Sealed against back pressure. • Constructed of off -white Bayblend®, designed to commer- cial standards, and offers an attractive appearance. • 94 -5V plastic flammability rating. • SEMS screws for wiring of the separate base. • Optional relay, isolator, and sounder bases. dn- 6935:al • H -202 NOTIFIER� by Honeywell FSP -851 with B71OLP base FSP -851T with B71OLP base Specifications Size: 2.1" (5.3cm) high x 4.1" (10.4cm) diameter installed in B501 base, 6.1" (15.5cm) diameter installed in B7101-Pbase. Shipping Weight: 5.2oz. (147g). Operating Temperature: FSP -851, 0 °C to 49 °C (32 °F to 120 °F); FSP -851T, 0 °C to 38 °C (32 °F to 100 0F). Low temper- ature signal for FSP -851T at 45 °F +/- 10 °F (7.22 °C +/ 5.54 °C). Operating Altitude: to 10,000 feet. ULIULC Listed Velocity Range: 0 -4000 ft/min. (1219.2 m/ min.), suitable for installation in ducts. Relative Humidity: 10 % -93% noncondensing. Thermal Ratings: Fixed - temperature setpoint 135 °F (57 °C). DETECTOR SPACING AND APPLICATIONS Notifier recommends spacing detectors in compliance with NFPA 72. In low airflow applications with smooth ceiling, space detectors 30 feet (9.144m) for ceiling heights 10 feet (3.148m) and higher. For specific information regarding detector spacing, placement, and special applications refer to NFPA 72. System Smoke Detector Application Guide, document A05 -1003, is available at systemsensoncom ELECTRICAL SPECIFICATIONS Voltage Range: 15 -32 volts DC peak. Standby Current (max. avg.): 300pA @ 24VDC (one com- munication every five seconds with LED enabled). LED Current (max.): 6.5mA @ 24VDC ('ON'). BASES AVAILABLE NOTE: A" suffix indicates ULC Listed model. dn- 6935:a1 •05/19/09 — Page 1 of 2 1 l 1 r B71OLP(A): 6.1" (15.5cm) diameter. B501 (A): 4.1" (10.4cm) diameter. B501 BH -2(A) or 8501 BHT 2(A): Sounder base assembly. Includes B501 base. B224RB(A) Relay Base: Screw Terminals, up to 14AWG (2.Omm2); Relay Type, Form -C; Rating, 2.OA @ 30VDC resis- tive, 0.3A @ 11OVDC inductive, 1.0A @ 30VDC inductive; Dimensions, 6.2" (15.748cm) x 1.2" (3.048cm) x 1.2" (3.048cm). B224BI(A) Isolator Base: Dimensions, 6.2" (15.748cm) x 1.2" (3.048cm) x 1.2" (3.048cm); Maximum, 25 devices between isolator bases. Installation FSP -851 plug -in detectors use a separate base to simplify installation, service, and maintenance. A special tool allows maintenance personnel to plug in and remove detectors with- out using a ladder. Mount base on an electrical backbox which is at least 1.5' (3.81 cm) deep. Suitable mounting base boxes include: • 4.0" (10.16cm) square box. • 3.5" (8.89cm) or 4.0" (10.16cm) octagonal box. • Single -gang box (except relay or isolator base). • With B501 BH -2 or 8501 BHT -2 base, use a 4.0" (10.16cm) square box. • With B224RB or B224BI base, use a 3.5" (8.89cm) octago- nal box, or a 4.0" (10.16cm) octagonal or square box. NOTE. 1) Because of inherent supervision provided by the SLC loop, end -of -line resistors are not required. Wiring "T-taps" or branches are permitted for style 4 (Class `B) wiring. 2) When using relay or sounder bases, consult data sheet DN -2243 (ISO -X) for device limitations between isolator modules and isolator bases. Agency Listings and Approvals These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. • UL Listed: S911 • ULC Listed: CS308 • MEA Listed: 225 -02 -E • FM Approved • CSFM:7272- 0028:206 • Maryland State Fire Marshal: Permit # 2122 • BSMI: C1313066760036 • CCCF: Certif. # 2004081801000017 (FSP -851T) Certif. # 2004081801000016 (FSP -851) • Lloyd's Register: 03/60011 Product Line Information NOTE: A "suffix indicates ULC listed model. FSP- 851:Low- profile intelligent photoelectric sensor. Must be mounted to one of the bases listed below. FSP- 851 A:Same as FSP -851 but with ULC listing. FSP- 851T:Same as FSP -851 but includes a built -in 135 °F (57 °C) fixed - temperature thermal device. FSP- 851TA:Same as FSP -851T but with ULC listing. BASES B71OLP: Standard U.S. low- profile base. B71OLPBP:Standard U.S. low- profile base, pkg. of 10. :B71OLPA:Standard U.S. low- profile base, ULC listing. B501BP:Standard European flangeless base, pkg. of 10. :B501A:Standard European flangeless base, ULC listing. B501 BH- 2(A):Sounder base, includes B501 (A) base. B501BHT-2(A): Same as B501BH -2(A), but includes temporal sounder. B224RB(A):Intelligent relay base. B224BI(A):Intelligent isolator base. Isolates SLC from loop shorts. ACCESSORIES F1 10: Retrofit replacement flange for older style bases. Con- verts older high profile base for use with FlashScan detectors. RA40OZ(A):Remote LED annunciator. 3- 32VDC. Fits U.S. single -gang electrical box. Supported by B71 OLP(A) and B501 (A) bases only. SMK400E:Surface mounting kit provides for entry of surface wiring conduit. For use with B501 (A) base only. RMK400:Recessed mounting kit. For use with B501 (A) base only. SMB600:Surface mounting kit for use with B710LP(A). BCK- 20OB:Black detector covers, box of 10. For use with FSP -851 only. M02 -04 -00:Test magnet. M02- 09 -00:Test magnet with telescope stick. XR2B:Detector removal tool. Allows installation and/or removal of FlashScan Series detector heads from base in high ceiling installations. T55-127-01 0: Detector removal tool without pole. XP- 4:Extension pole for XR2B. Comes in three 5 -ft. sections. Notifier® and FlashScan® are registered trademarks of Honeywell Interna- tional Inc. Bayblend® is a registered trademark of Bayer Corporation. 02009 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. I�O �oo� This document is not intended to be used for installation purposes. We try to keep our product information up -to -date and accurate. We cannot cover all specific applications or anticipate all requirements. INNINEWS 8 MANIFACIIMEf IVALITY SYSTEMS All specifications are subject to change without notice. Made in the U.S. A. For more information, contact Notifier. Phone: (203) 484 -7161, FAX: (203) 4847118. www.notifier.com Page 2 of 2 - dn- 6935:al • 05/19/09 FST -851 Series Intelligent Thermal (Heat) Detectors with FlashScan® General Notifier FST -851 Series intelligent plug -in thermal detectors with integral communication has features that surpass conven- tional detectors. Point ID capability allows each detector's address to be set with decade address switches, providing exact detector locations. FST -851 Series thermal detectors use an innovative thermistor sensing circuit to produce 135 °F / 57 °C fixed - temperature (FST -851) and rate -of -rise thermal detection (FST -851 R) in a low- profile package. FST -851 H pro- vides fixed high - temperature detection at 190 °F /88 °C. These thermal detectors provide effective, intelligent property protec- tion in a variety of applications. FST -851 Series detectors are compatible with all Notifier intelligent Fire Alarm Control Pan- els, except FireWarden series panels. . FlashScanO (U.S. Patent 5,539,389) is a communication pro- tocol developed by Notifier Engineering that greatly enhances the speed of communication between analog intelligent devices and certain NOTIFIER systems. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel's CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of earlier designs. Features • Sleek, low- profile, stylish design. • State -of- the -art thermistor technology for fast response. • Rate -of -rise model (FST -851 R), 15 °F (8.3 °C) per minute. • Factory preset at 135 °F (57 0C); high- temperature model at 190 °F (88 °C). • Addressable by device. • Compatible with FlashScan® and CLIP protocol systems. • Direct dial entry of address 01 -159 for FlashScan® loops, 01 -99 CLIP mode loops. • Two -wire SLC connection. • Visible LEDs "blink" every time the unit is addressed. • 360° -field viewing angle of the visual alarm indicators (two bi -color LEDs). LEDs blink green in Normal condition and turn on steady red in Alarm. • Integral communications and built -in device -type identifica- tion. • Remote test feature from the panel. • Built -in functional test switch activated by external magnet. • Walk test with address display (an address of 121 will blink the detector LED 12- (pause) -1). • Low standby current. • Backward- compatible. • Built -in tamper- resistant feature. • Designed for direct - surface or electrical -box mounting. • Sealed against back pressure. • Plugs into separate base for ease of installation and main- tenance. Separate base allows interchange of photoelec- tric, ionization and thermal sensors. • SEMS screws for wiring of the separate base. • Constructed of off -white BayblendO, designed to commer- cial standards, and offers an attractive appearance. dn- 6936:a1 • H -211 NOTIFIER� by Honeywell FST -851 Series in B71OLP base • 94 -5V plastic flammability rating. • Remote LED output connection to optional RA40OZ remote LED annunciator. • Optional sounder, relay, and isolator bases. • Optional recessed (RMK400) or surface (SMK400E) base mounting kits. Specifications Size: 2.1" (5.3 cm) high x 4.1" (10.4 cm) diameter installed in B501 base, 6.1" (15.5 cm) diameter installed in B71OLP base. Shipping weight: 4.8 oz. (137 g). Operating temperature range: FST -851 Series, FST -851 R: — 20 °C to WC (-4 °F to 100 °F); FST -851 H: —20 °C to 66 °C (-4 °F to 150 °F). Detector spacing: UL approved for 50 ft. (15.24 m) center to center. FM approved for 25 x 25 ft. (7.62 x 7.62 m) spacing. Relative humidity: 10% — 93% noncondensing. Thermal ratings: fixed - temperature setpoint 135 °F (57 0C), rate -of -rise detection 15 °F (8.3 °C) per minute, high tempera- ture heat 190 °F (88 0C). Altitude rating: 10,000 feet. ELECTRICAL SPECIFICATIONS: Voltage range: 15 - 32 volts DC peak. Standby current (max. avg.): 300 pA @ 24 VDC (one com- munication every 5 seconds with LED enabled). LED current (max.): 6.5 mA @ 24 VDC ( "ON "). BASES AVAILABLE: B71OLP: 6.1" (15.5 cm) diameter. B501: 4.1" (10.4 cm) diameter. B501 BH -2 or B501 BHT-2: Sounder base assembly. B224RB Relay Base: Screw terminals: up to 14 AWG (2.0 mm2). Relay type: Form -C. Rating: 2.0 A @ 30 VDC resistive; 0.3 A @ 110 VDC inductive; 1.0 A @ 30 VDC inductive. Dimensions: 6.2" (15.748 cm) x 1.2" (3.048 cm). B224BI Isolator Base: Dimensions: 6.2" (15.748 cm) x 1.2" (15.748 cm). Maximum: 25 devices between isolator bases. See Note 2 under Installation. Applications Use thermal detectors for protection of property. For further information, go to systemsensor.com for manual 156- 407 -00, Applications Manual for System Smoke Detectors, which pro- dn- 6936:a1 •06/8/09 — Page 1 of 2 + r ► vides detailed information on detector spacing, placement, zoning, wiring, and special applications. Installation The FST Series plug -in intelligent thermal detector uses a sep- arate base to simplify installation, service, and maintenance. Installation instructions are shipped with each detector. Mount base (all base types) on an electrical backbox which is at least 1.5" (3.81 cm) deep. Suitable boxes include: • 4.0" (10.16 cm) square box. • 3.5" (8.89 cm) or 4.0" (10.16 cm) octagonal box. • Single -gang box (except relay or isolator base). • With B501BH -2 or B501 BHT-2 base, use a 4.0" (10.16 cm) square box. • With B224RB or B224B1 base, use a 3.5" (8.89 cm) or 4.0" (10.16 cm) octagonal box, or a 4.0" (10.16 cm) square box. NOTE: 1) Because of the inherent supervision provided by the SLC loop, end -of -line resistors are not required. Wiring 7-taps" or branches are permitted for Style 4 (Class B') wiring. 2) When using relay or sounder bases, consult data sheet DN -2243 (ISO -X) for device limitations between isolator modules and isolator bases. Agency Listings and Approvals These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. • UL Listed: S747 • ULC Listed: S6978MEA Listed: 383 -02 -E • FM Approved • CSFM:7270- 0028:196 • BSMI: 01313066760025 • CCCF: Certif. # 2004081801000018 • U.S. Coast Guard: 161.002/23/3 (AFP -200); 161.002/27/3 (AFP1010 /AM2020); 161.002/42/1 (NFS -640) • Lloyd's Register: 03/60011 Product Line Information "A" suffix indicates ULC Listed model. FST -851: Intelligent thermal detector. Must be mounted to one of the bases listed below. FST 851 A: Same as FST -851 but with ULC Listing. FST 851 R: Intelligent thermal detector with rate -of -rise feature. FST 851 RA: Same as FST -851 R but with ULC Listing. FST851H: Intelligent high- temperature thermal detector. FST 851 HA: Same as FST -851 H but with ULC Listing. BASES: B71OLP: Standard U.S. low- profile base B710LPBP: Standard U.S. low- profile base, pkg. of 10. B71OLP: Standard U.S. low - profile base. B710LP(A): Standard U.S. low- profile base. B501 BP: Standard European flangeless base, pkg. of 10 B501: Standard European flangeless base. B501 (A): Standard European flangeless base, ULC Listing. BH501BH -2: Sounder base, includes B501 base above. BH501BHT2: Same as B501 131-1-2, but includes temporal sounder. BH501 BHA: Sounder base, includes B501 base above BH501 BHTA: Same as BH501 BHA, but includes temporal sounder. B224BI(A): Intelligent isolator base. Isolates SLC from loop shorts. ACCESSORIES: F110: Retrofit replacement flange for older style high profile bases. Converts bases for use with FlashScan® detectors. RA400Z(A): Remote LED annunciator. 3 — 32 VDC. Fits U.S. single -gang electrical box. Supported by B710LPBP(A) and B501 (A) bases only SMK400E: Surface mounting kit provides for entry of surface wiring conduit. For use with B501 (A) base only RMK400: Recessed mounting kit. For use with B501 (A) base only SMB600: Surface mounting kit for use with B710LPBP(A). BCK -20OB: Black detector covers, box of 10. M02 -04 -00: Test magnet. M02 -09 -00: Test magnet with telescope stick. XR2B: Detector removal tool. Allows installation and /or removal of FlashScanO Series detector heads from base in high ceiling installations. T55- 127 -010: Detector removal tool without pole. XP-4: Extension pole for XR2B. Comes in three 5 -ft. sections. Notifie* and FlashScan® are a registered trademark of Honeywell International Inc. Bayblend® is a registered trademark of Bayer Corp. ®2009 by Honeywell International Inc. All rights reserved. Unauthorized use of this docu- ment is strictly prohibited. I�O �oo� This document is not intended to be used for installation purposes. We try to keep our product information up -to -date and accurate. We cannot cover all specific applications or anticipate all requirements. MINION S MAIMIACIMMIM QUALITY SYSTEMS All specifications are subject to change without notice. Made in the U.S. A. For more information, contact Notifier. Phone: (203) 484 -7161, FAX: (203) 484 -7118. www.notifier.com Page 2 of 2 — dn- 6936:al • 06/8/09 + a w ► InnovairFlex Intelligent Non -Relay Photoelectric Duct Smoke Detector General The Notifier InnovairFlex DNR intelligent non -relay photoelectric duct smoke detector and DNRW watertight non -relay photoelec- tric duct smoke detector feature a pivoting housing that fits both square and rectangular footprints capable of mounting to a round or rectangular duct. DNRW duct smoke detector, with its NEMA -4 rating, is listed as a watertight, LIV resistant enclosure providing protection against falling dirt, rain, and windblown dust, splashing and hose directed water, allowing operators to use the detector in the most extreme environments. These units sense smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, tem- peratures of -4 degrees F to 158 degrees F, and a humidity range of 0 to 95 percent (non- condensing.) An improved cover design isolates the sensor head, which allows for ease of maintenance. A cover tamper feature indi- cates a trouble signal for a removed or improperly installed sen- sor cover. The Notifier InnovairFlex housing provides a 3/4 -inch conduit knockout and ample space to facilitate easy wiring and mounting of a relay module. The Notifier InnovairFlex duct smoke detector can be custom- ized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories. Features • Photoelectric, integrated low -flow technology • Air velocity rating from 100 ft/min to 4,000 ft/min (0.5 m/s to 20.32 m /s) • Versatile mounting options: square or rectangular configura- tion • Broad ranges for operating temperature (4F to 158F) and humidity (0% to 95% non - condensing) • Patented sampling tube installs from front or back of the detector with no tools required • Cover tamper signal • Increased wiring space with a newly added 3/4" conduit knockout • Available space within housing to accommodate mounting of a relay module • Easily accessible code wheels on sensor head (sold sepa- rately) • Clear cover for convenient visual inspection • Remote testing capability • Requires com line power only • Accommodates the installation of an addressable relay mod- ule, sold separately, (FRM -1 or NC -100R) for applications requiring a Form -C relay dn- 60429:b �J NOTIFIER� by Honeywell Specifications Size: (Rectangle) 14.38 in (37 cm) Length; 5 in (12.7 cm) Width, 2.5 in (6.6 cm) Depth Size: (Square) 7.75 in (19.7 cm) Length; 9 in (22.9 cm) Width; 2.5 in (6.35 cm) Depth Weight: 1.6 lb (0.73 kg) Operating Temperature Range: -4 degrees F to 158 degrees F ( -20 degrees C to 70 degrees C) Storage Temperature Range: -22 degrees F to 158 degrees F ( -30 degrees C to 70 degrees C) Operating Humidity Range: 0% to 95% relative humidity (non - condensing) Air Duct Velocity: 100 to 4,000 ft/min (0.5 to 20.32 m /s) Accessories Notifier provides system flexibility with a variety of accessories, including two remote test stations and different means of visible and audible system annunciation. As with our duct smoke detec- tors, all duct smoke detectors accessories are LIL listed. DNR(W)s with a date code of 0013 or higher do not require external 24VDC for remote test applications when used with a remote - test - capable detector. ACCESSORY CURRENT LOADS AT 24 VDC Device Standby Alarm RA10OZ OmA 12 mA Max RTS151/ OmA 12mA Max RTS151 KEY dn- 60429:b • 03/12/10— Page 1 of 2 4 r-, r Agency Listings and Approvals Consult product manual for lists of compatible UL- Listed devices. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Con- sult factory for latest listing status. • UL Listed: S911 • ULC Listed: S911 • CFSM Listed: 3242 - 1653:209 Product Line Information NOTE. `A or "CDN" suffix indicates ULC listed model. DNR(A): Intelligent non -relay photoelectric low flow smoke detector housing. Requires photoelectric smoke detector (sold separately). DNRW: Watertight intelligent non -relay photoelectric low flow duct smoke detector housing. Requires photoelectric smoke detector (sold separately). NEMA -4. FSP -851: Addressable low- profile photoelectric smoke detector. FSP -851 R: Remote test capable addressable low - profile photo- electric smoke detector. NP -100: Addressable low- profile photoelectric smoke detector for FireWarden series panels. NP -10OR: Remote test capable addressable low- profile photo- electric smoke detector for FireWarden series panels. DCOIL: Remote test coil. Required for older DNR(W) duct detector housing. DST1(A): Metal sampling tube duct width up to 1 ft (0.3m) DST1.5(A): Metal sampling tube duct widths up to 1 ft to 2 ft (0.3 to 0.6 m) DST3(A): Metal sampling tube duct widths up to 2 ft to 4 ft (0.6 to 1.2 m) DST5(A): Metal sampling tube duct widths up to 4 ft to 8 ft (1.2 to 2.4 m) DST10(A): Metal sampling tube duct widths up to 8 ft to 12 ft (2.4to3.7m) DH4000E -1: Weatherproof enclosure ETX: Metal exhaust tube duct, width 1 ft (0.3 m) M02 -04-00: Test magnet P48 -21 -00: End cap for metal sampling tubes RA100Z(A): Remote annunciator alarm LED RTS151(A): Remote test station RTS151 KEY(A): Remote test station with key lock Important Note • DNRW duct detector housings with a date code of 0013 or higher do not require a DCOIL or auxiliary 24 VDC for remote test applications when used with a remote test capable detector. • DNRW duct detector housings with a date code of 0012 or earlier require a DCOIL and auxiliary 24 VDC power for remote test applications. ONYX® and NOTIFIERO are registered trademarks and NOTI•FIRE•NE" is a trademark of Honeywell International Inc. 02010 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. I�O �oo� This document is not intended to be used for installation purposes. We try to keep our product information up -to -date and accurate. We cannot cover all specific applications or anticipate all requirements. INIINENS E MANIF1171YMIli All specifications are subject to change without notice. QUALITY SYSTEMS Made in the U.S. A. For more information, contact Notifier. Phone: (203) 484 -7161, FAX: (203) 4847118. www.notifier.com Page 2 of 2 — dn- 60429:b • 03/12/10