RF-13-1820 f , I
Inspection Worksheet
Miami Shores Village
10050 N.E. 2nd Avenue Miami Shores, FL
Phone: (305)795-2204 Fax: (305)756-8972
Inspection Number: INSP-198404 Permit Number: RF-8-13-1820
Scheduled Inspection Date: September 11,2013 Permit Type: Roof
Inspector: Naranjo, Ismael
Inspection Type: Final Roof
Owner: EAST CONDOMINIUM INC,SHORES Work Classification: Repair Roof
DI A7A
Job Address:9120 NE 8 Avenue BLDG G
Miami Shores, FL 33138-0000
Phone Number
Parcel Number 113206044001
Project: <NONE>
Contractor: ALL CONSTRUCTION &DEVELOPERS INC Phone: (786)768-4330
Building Department Comments
Infractio Passed Comments
TILE ROOF REPAIR INSPECTOR COMMENTS False
Insp for Comments
Passed FATED AS REINSPECTIO FOR INSP-197044. NO LADDER AT JOB
SITE. 7\i 1,2-
Failed
Correction ❑
Needed
Re-Inspection ❑
Fee
No Additional Inspections can be scheduled until
re-inspection fee is paid.
September 10,2013 For Inspections please call: (305)762-4949 Page 14 of 28
C I VI L Reileh Engineering Corp.
(Consulting Eng-neer)
2370 S.W.123 Avenue
Miami,Florida 33175-1174
Tel:305-823-8008/305-397-6414
ENGINEER Fax-305-823-3300/305-884-8834
Website:wwvs.reitehengineering.com
September 9, 2013
All Construction and Developers
1000 - 5 Street Suite 200
Miami Beach, Florida 33139
Project: ROOF TILE UPLIFT TEST REPORT
Existing Building
9120 Northeast 8 Avenue
Miami Shores, Florida
Information provided by client:
Permit Number: Not Provided
Date Completion: September 5, 2013
Roofing Contractor: All Construction and Developers
Project Dumber: 13-0678
(Testing Laboratory Certificate#11-0715.04)
Dear Sirs;
In accordance with your request and authorization,a representative of Reileh Engineering Corporation
completed the Roof Tile Uplift Test at the above referenced project. This testing was performed in general
accordance with Roofing Application.Standard TAS No.106--Standard procedure for field verification
ofthe bonding of mortar or adhesive set tile system and mechanically attached,rigid,discontinuous roof
systems.
The total of the tested roof surface area was less than 1000 square feet,and the mean height of the roof
is less than 40 feet above ground surface. The type of tile used for this project was reported to be
concrete/clay Roof Tile. This tile was reported to have been foamed in place.
At the time of our inspection,the entire area of the roof was examined for loose tiles. Not less than one
(1)tile in ten(10)of all components in the field area and one(1)tile in five(5)of all tiles in the perimeter
and comer areas were physically examined. A minimum of one(1)test per every two(2)squares in the
field,one(1)test per square in the perimeter area,ridge caps and(1)in the comer areas were conducted.
Based on our test results,we conclude that the installation of the roof the at the above referenced project
meets the test requirement outlined in the above-mentioned protocol. Attached please find a copy of our
test report for your review.
Reileh Engineering Corporation appreciates the opportunity of assisting you in this project. If you have
any questions or if we may be of further assistance, please do not hesitate to contact the undersigned.
Respectfully submitted;
Reileh Engineering Corporation
A�' 6y
1V�ohanad Sonny Salleh, P.E.49014
Project Manager
TILE UPLIFT TEST
Existing Building
9120 Northeast 8 Avenue
Miami Shores,Florida
Reileh Engineering Corporation--Project Number- 13-0678—Page 2 of 3
Report of
TILE UPLIFT TEST
for
Existing Building
9120 Northeast 8 Avenue
Miami Shores
Florida
Project Number: 13-0678
Test Number Test Load Qbf) Test Status
1 35 Pass
2 35 Pass
3 35 Pass
4 35 Pass
5 35 Pass
6 35 Pass
7 35 Pass
Test 1-2 Perimeter, 3-7 Field
Reileh Engineering Corporation--Project Number- 13-0678—Page 3 of 3
NOM
NOr INCLLM9
6 y
S 3 4
I 2
8'
6'
TE5f 111.E MC;IWt1 - 20 5F O Mna CAP T�51 I OCA110N
HELP - 5 CmP SF CAP- O S
C - f'L�IWtP,17I5MNC�,a = 3' L
Ot W O P NO1�5 005 T1l ,�-0678
MPtZ CAP - O CRW AAA- 3'X 3'
APPPDX,P00F 1 5T LOCA110N5 AN12 f711V MION5
Miami Shores Village
Building Department
10050 N.E.2nd Avenue,Miami Shores,Florida 33138
Tel:(305)795.2204 Fag:(305)756.8972
INSPECTION'S PHONE NUMBER:(305 762.4949
FBC 20 LO
?
BUILDING Permit No.
PERMIT APPLICATION Master Permit No. 6
li Permit T : BUILDING
ype ROOFING
JOB ADDRESS: 112-D C VILI% 1r� lr em- �I(A w
City. Miami Shores County. Miami Dade Zip:
Folio/Parcel#:
Is the Building Historically Designated:Yes NO —Flood Zone.
OWNER:Name(Fee S' le Titleholderj�66 res ?1 t, E„AS- C.-,j Phone#•
Address .4.5 NE I I ��'uc U- go
City. M 1 AM 1 '56 re 5. State: ( �� zip: 3�3
TenanV1,essee Name: Phone#:
Email:
a
CONTRACTOR:Company Name: Phone#:
Address: °° 0 _
City: State:
Qualifier N e•-jV W4 xuo Phone#:--any 4 q 4-.3 ®,_
State Certification 41tegistration P. 13 1?7q� Certificate of Competency#:
Contact Phone#: le)YAA 9 3t Email Address:
DESIGNER Architect/Enginew. Phone#:
Value of Work for this Permit:$ Square/Linear Footage of Work:
Type of Work: UAddition DAlteration ONew /Replace ®Demolition
Description of Work:
Color thru dle:
Submittal Fee S ADD Permit Fee$ 1 CCF$ CO/CC$
Scanning Fee$ Radon Fee$ DBPR$ Bond$_
Notary$ Tndning/Education Fee$ Technology Fee$
Double Fee$ Structural Review$
TOTAL FEE NOW DUE$ Ll
Bonding Company's Name(if applicable)
Bonding Company's Address
City State Zip
Mortgage Lender's Name(if applicable)
Mortgage Lender's Address
City State zip
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK,PLUAMING,SIGNS,
WELLS,POOLS,FURNACES,BOILERS,HEATERS,TANKS and AIR CONDITIONERS,ETC.....
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF
COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR
IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN
FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE
RECORDING YOUR NOTICE OF COMMENCEMENT."
Notice to Applicant. As a condition to the issuance of a building permit with an estimated value exceeding$2500, the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subject to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site
for the first inspection which occurs seven (7) days after the building permit is issued In the absence of such posted notice, the
inspection will not be approved and a reinspection fee will be charged.
Signature Signature
or Agent Contractor
The foregoing' ent was acknowledged before me this The forego' g' t was acknowledged before me this
day of ,20_a,bY� pc�r'�t j' C�17N�/�-L tom} , day of 20�,by
o' nall known to me r who has produced w is personally kao me or who has produced
As identification and who did take an oath s identification and who did take an oath.
Nth "Y PUBBLIC: NOTAR P
Sign:- Sign: �
Print: /4 (4'f2 V M Print:
My Commission Expires: 04 �,ry Pubft 3"41 FIN Any Commission Exp' ey G1813 Labrade
. Oscar M ZffS",E o �1#FF021200
My commissionEEISMS EVIRM MAY2n,2017
aw E*hm 12MPMS WWWAAROMMO7A amm
APPROVED BY �' 1 Plans Examiner Zoning
Structural Review Clerk
(Revised 522012)(Revised 3/122012)XRevised 06/10/2009)(Revised 3/15/09)(Rerised 7/10/2007)
_ 1
The Sfines Plaza East Con dbmbih m Associatio%Inc.
748 North East 918t Street
Miami Shores,FL 33138
305-759-9069/FAX 306-759-2101
E-MAIL spe123Qatt.net
August 1, 2013
Miami Shores Village
Buildin g Dept.
10050 NE 2nd Avenue
Miami Shores, FL 33138
Dear Sir/Madam:
This letter will
serve as your confirmation that All Construction&
Developers, Inc. has been contracted and is authorized by the Board of
Directors of the Shores Plaza East Condominium Association to perform
roof repairs at building 9120 NE 8th Avenue, (Rear Hallway),Miami Shores,
Fla.
Should you have any questions regarding the enclosed,please feel free to
contact the condominium office.
Sincerely yours,
Robe Gonzalez
President
cc: file
a
a l0
k
m
_ 4p w
pry•.
l sf ^
Licensing Portal - License Search Page 1 of 1
2:28:00 PM 811312013
Data Contained In Search Results Is Current As Of 08/13/2013 02:27 PM.
Search Results
Please see our lossary of terms for an explanation of the license status shown in
these search results.
For additional information, including any complaints or discipline, click on the name.
Name License
License Type Name Type Number/ Status/Expires
Rank
Certified Roofing ALL CONSTRUCTION & CCC1328145 Current, Active
Contractor ]DEVELOPERS INC SBA Cert Roofing 08/31/2014
Main Address*: 1000 5 STREET MIAMI BEACH,FL 33139
Certified General ALL CONSTRUCTION CGC1513259 Current, Active
Contractor DEVELOPERS INC SBA Cert General 08/31/2014
Main Address*: 1000 5 STREET MIAMI BEACH,FL 33139
Construction ALL CONSTRUCTION
Business DEVELOPERS INC Primary Business Current
Information Info
Main Address*: 11865 SW 26 ST.BUILDING I,SUITE 12 MIAMI,FL 33175
42=11 do=
*denotes
Main Address-This address Is the Primary Address on file.
Mailing Address-This is the address where the mail associated with a particular license will be sent(if different from the
Main or License Location addresses).
License Location Address-This is the address where the place of business is physically located.
3940 North Monroe Street,Tallahassee FL 32399:: Email:Customer Contact Center::Customer Contact Center:850.487.1395
The State of Florida is an AA/EEO employer.Couvriaht 2007-2010 State of Florida.Privacy Statement
Under Florida taw,email addresses are public records.If you do not want your email address released in response to a public-records request,do
not send electronic mail to this entity.Instead,contact the office by phone or by traditional mall.If you have any questions,please contact
850.487.1395.*Pursuant to Section 455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must
provide the Department with an email address if they have one.The emaiis provided may be used for official communication with the licensee.
However email addresses are public record.If you do not wish to supply a personal address,please provide the Department with an email address
which can be made available to the public.Please see our Chanter 455 page to determine if you are affected by this change.
https://www.myfloridalicense.com/w111.asp?mode=2&search=Name&SID=&brd=&typ= 8/13/2013
JEFF ATWATER •��O"""`'�.
CHIEF FINANCIAL OFFICER STATE OF FLORIDA
DEPARTMENT OF FINANCIAL SERVICES
DIVISION OF WORKERS'COMPENSATION
•CERTIFICATE OF ELECTION TO BE EXEMPT FROM FLORIDA WORKERS'COMPENSATION LAW
CONSTRUCTION INDUSTRY EXEMPTION
This certifies that the individual listed below has elected to be exempt from Florida Workers'Compensation law.
EFFECTIVE DATE: 8/22/2013 EXPIRATION DATE: 8/22/2015
PERSON: CORREDOR MAURICIO
FEIN: 208363228
BUSINESS NAME AND ADDRESS:
ALL CONSTRUCTION&DEVELOPERS INC
1000 5 STREET
MIAMI BEACH FL 33139
SCOPES OF BUSINESS OR TRADE:
LICENSED GENERAL ROOFING-ALL KINDS
CONTRACTOR AND DRIVER
Pursuant to Chapter 440.05(14),F.S.,an officer of a corporation who elects exemption from this chapter by filing a certificate of election under this section may
not recover benefits or compensation under this chapter.Pursuant to Chapter 440.05(12),F.S.,Certificates of election to be exempt.,apply only within the scope
of the business or trade listed on the notice of election to be exempt Pursuant to Chapter 440.05(13),F.S.,Notices of election to be exempt and certificates of
election to be exempt shall be subject to revocation if,at any time after the filing of the notice or the issuance of the certificate,the person named on the notice or
certificate no longer meets the requirements of this section for issuance of a certificate.The department shall revoke a certificate at any time for failure of the
person named on the certificate to meet the requirements of this section.
DFS-F2-DWC-252 CERTIFICATE OF ELECTION TO BE EXEMPT REVISED 07-12 QUESTIONS?(1350)413-1609
13 -- ( gzA�>
Miarni S ores Village
Y
APPROVED_. J BY DATE
ZONING DEPT HI L N ONES
BLDG DEPT 1
j
k;
SUBJECT tQ CGNIPIWICE WITH ALL FEUER,AL
STATE ANLj C(-IjN, (ril,L-S AND REGIJLA'TIOr,)S
Florida Building Code Edition 2010
High Velocity Hurricane Zone Uniform Permit A -Fomr a
■
Section A (General Information)
Master Permit No. Process No.
Contractor's Name frc� �v Y•� �r
C Job Address /M7
ROOF CATEGORY -
• i
❑ Low Slope ❑ Mechanically Fastened Tile �,Mortar/Adhesive et TiI I
• e
• ❑ Asphaltic ❑
p Metal PaneUShin 1 _
Shingles g es Wood ShinglesiS ak�as.
C ❑ Prescriptive BUR-RAS 150
ROOF TYPE
■ I.7 New Roof ❑ Reroofing ❑ Recovering Z Repair ❑ Maintenance
ROOF SYSTEM INFORMATION
Law Slope Roof Area(SF) Steep Sloped Roof Area(SF) Total(SF)
s '
Section B (Roof Plan)
Sketch Roof Plan: Illustrate all levels and sections, roof drains, scuppers, overflow
scuppers and overflow drains. Include dimensions of sections and levels, clearly
•
identify dimensions of elevated pressure zones and location of parapets.
:
`i • - s a
■
t .� __.; �-J..•/ � � 1' °jam .:�� + ..: :.ry. ( ,
J.. .. ..3—.
r r i
•
■
■
9mn R naina Run niNn rune_ncaineurn.1
HIGH-VELOCnY HURRICANE ZONES
Florida Building Code Edition 2010
Mi h Vebft Hurricane Zone Uniform Permit Application Form.
Section D Stee Sloped Roof S stem
. ( p p y
Roof System Manufacturer:_!. �r�►•,,� ,' / y ��
•
Product Approval Number: i`Z- OZ0{ o-7-
c
Minimum Design Wind Pressures If
Applicable (From RAS 127 or G
. alculatons):
PI: P2: P3•
Maximum Design Pressure
Product Approval Specific System:
Method of file attachment:
■
Steep Sloped Roof System Desci lot on
' Deck Type:
G
ype Underiayment:
■ RaafSlope: Insulation;
r
: 12 �f
•
Fire Barrie
tener T pe Spacing: �Ridge Ventilation? al j
• ' , ,r t�
Adhesive Type:
F0 Q11 VIn 4f
ype Cap She
oof Covering: 1
Mean Roof Height: >�o,wraT ' c""L'
rY�
Type &Size Drip
• ge:
r
•
■
•
2nin FLORIDA RUILDIN(C CnnF_RFCInpKMAI
- The Skores Pf=a Mast Con ombuwn Assocmtiom Inc.
745 North East 91p1 Sttet
Wand Shores,Fl 33138
306.759-9089-bokxdFan
-E-Mail
Property Layout w
s w
(Usi)
E
2
715 t
717.1 i7 ;
aw
r: 725 u •
D as s
u s 716
723 M
so a
c
+r s
735 W.Parls
E .
nv
N.
P.rricit�a
S.L.ParWnV _ 726--
L
�
4
�4 it i1 Si JO • • 7L� w
A- Vrt1l4$PVI{LN r►1�i111.
S�OTatlti
l.dYfltlf7' .f.L
M.NW"4
L F 736 I s 1
S9140
t p H 9150 tl
7 r
e r
t t
N.E.8th Rye
SECTION 1524
HIGH VELOCITY HURRICANE ZONES REQUIRED OWNERS NOTIFICATION FOR ROOFING
CONSIDERATIONS
1524.1 As it pertains to this section, it is the resspon sWity of the roofing contractor to provide the owner with the
required roofing permit, and to explain to the owner the content of this section.. The provisions of Chapter 15 of
the Flonde&Mng Code, Buftng govern the ffw mum requirements and standards of the industry for roofing
system Installations. Additionally,the following Items should be addressed as part of the agreement between to
irrthe contractor.The owner's initial in the adjacent box indicates that the Item has been explained.
Aesthetics-Worlamanship:The workmanship provisions of Chapter 15(High Velocity Hurricane Zone)
e purpos e of providing that the roofing system meets the wind resistance and water Intrusion
Performance standards. Aesthetics (appearance) issues are not a consideration with respect to workmanship
Aesthetic Issues such as color or architectural appearance,brat are not part of a zoning code,should
as part of the agreement between the owner and the contractor.
Renaikng Wood Decks.When replacing roofing,the exkirnj wood roof deck may have to be renaded
ance with the current provisions of Chapter 16(High Velocity-Hurricane Zones)of the Florida Building
roof deck is usually concealed prior to removing the existing roof system).
3. Common Roofs: Common roofs are those which have no visible delineation between nei bonng
i.e.townhouses,condominiums,urns, etc.). In buildings with common roofs,the roofing contractor and/or owner
it
note the occupants of adjacent units of roofing worts to be performed.
4. Callings: Exposed,open beam ceilings are where the underside of the roof decking can be
vi from below. The owner may wish to maintain the architecture!ure! appearance, therefore, roofing rail
Y of the underside of the decking may not be acceptable. The Florida Building Cade provides the
intaining this appearance.
oncKng Wager: The current roof system and/or deck of the building may not drain well and may
to pond (accumulate) in lornr Mng areas of the root. Ponding can be an indication of structural
distress and may require the review of a professional structural engineer. Ponding may shorten the life
e and puce of the new ruing system. Ponding conditions may not be evident until the original
is removed.Ponding conditions should be corrected.
& Overflow scuppers (wall outlets): It is required that rainwater flow off so that the roof is not
from a build up of water. Perimetededge walls or other roof extensions may block this discharge if
oyerqow scuppers(wan outlets)are not provided. It may to necessary to install overflow scuppers in accordance
Florida Building Code, Plumbing.
7.Ventilation:Most roof structures should have some ability to vent natural airflow through the Interior of
the aural assembly(the building Itself).The existing amount of attic ventilation shall not be reduced. It may be
beneficial to consider additional venting which can result in extending the service life of the roof.
nt' re Date Coptfractoes signature
Property Aess 2 3� � Permit Number
J
48K*I/M005.ComP&er3enikm Buf7aft Department
!4
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF PERMITTING,ENVIRONMENT,AND REGULATORY AFFAIRS(PERA) 11805 SW 26 Street,Room 208
BOARD AND CODE ADMINISTRATION DIVISION Miami,Florida 33175-2474
T(786)315-2590 F(786)315-2599
NOTICE OF ACCEPTANCE(NOA) Hw.miamidade.p-ov/sera
(N ) w°
Lamoti Roof Tile,Inc.
1390 NW 29 Street
Miami,FL,33142
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials.The
documentation submitted has been reviewed and accepted by Miami-Dade County PERA-Product Control Section to
be used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below.The Miami-Dade County Product Control Section
(In Miami Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted
manner,the manufacturer will incur the expense of such testing and the AHJ may immediately revoke,modify,or
suspend the use of such product or material within their jurisdiction. PERA reserves the right to revoke this
acceptance,if it is determined by Miami-Dade County Product Control Section that this product or material fails to
meet the requirements of the applicable building code.
This product is approved as described herein,and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Barrel High Profile Concrete Tile
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo,city,state and following
statement: "Miami-Dade County Product Control Approved". unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any product,
for sales,advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and tbllcwzd by the
expiration date may be displayed in advertising literature. If any portion of the NOA is disvla-ved,then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufactur—e;t r is distribatGrs and
shall be available for inspection at the job site at the request of the Building Official.
This renews NOA#06-1214.47 and consists of pages 1 through 5.
The submitted documentation was reviewed by Alex Tigera.
NOA No.: 124207.022
Expiration Date:03/14/17
Approval Date:05/31/12
Page 1 of 5
ROOFING ASSEMBLY APPROVAL
Category: Roofing
Sub-Category: High Profile Roofing Tiles
Material: Concrete
1. SCOPE
This renews a roofing system using Lamoti Barrel High Profile Concrete Tile, as manufactured by Lamoti Roof
Tile, described in Section 2 of this Notice of Acceptance, designed to comply with the Florida Building Code.
For the locations where the pressure requirements, as determined by applicable building code does not exceed
the design pressure values obtained by calculations in compliance with RAS 127 using the values listed in
section 4 herein.The attachement calculations shall be done as a moment based system.
2. PRODUCT DESCRIPTION
Manufactured by Test Product
Applicant Dimensions Specifications Description
Barrel Concrete Tile Length : 18" TAS 112 High profile,two piece,concrete roof tile. For
Width : 8 3/4" direct deck,adhesive set applications only.
Thickness : %"
Trim Pieces 1=varies TAS 112 Accessory trim,concrete roof pieces for use at hips,
w=varies rakes,ridges and valley terminations.
varying thickness Manufactured for each file profile.
2. 1 PRODUCT DESCRIPTION
1. Miami, FL.
2.2 SUBMITTED EVIDENCE:
Test Asencv Test Identifier Test Name/Report Date
IBA Consultants, Inc. 2358-54 TAS-101 05/08/07
American Test Labs of South RT0511.02-'l2 TAS-112 05/16/12
Florida
NOA No.: 12-0207.02
Expiration Date:03114/17
Approval Date:05/31/12
Page 2 of 5
3. LIMITATIONS
3.1 Fire classification is not part of this acceptance.
3.2 For mortar or adhesive set tile applications, a static field uplift test shall be performed in accordance with
TAS 106.
33 Applicant shall retain the services of a Miami-Dade County Certified Laboratory to perform quarterly test
in accordance with TAS 112, appendix 'A'. Such testing shall be submitted to the Building Code
Compliance Office for review.
3.4 Minimum underlayment shall be in compliance with the applicable Roofing Applications Standards listed
section 4.1 herein.
3.5 30/90 hot mopped underlayment applications may be installed perpendicular to the roof slope unless stated
otherwise by the underlayment material manufacturers published literature.
3.6 This acceptance is for wood deck applications. Minimum deck requirements shall be in compliance with
applicable building code.
3.7 May be installed on slopes 2":12"to 7':12"
4. INSTALLATION
4.1 Lamoti `Barrel high Profile Concrete Tile' and its components shall be installed in strict compliance with
Roofing Application Standard RAS 120.
4.2 Data For Attachment Calculations
Table 1: Average Weight(W)and Dimensions(I x w)
I
Tile Profile Weight-W(ibf) Length-1 (ft) Width-w(ft)
Barrel High Profile Concrete Tile 8.1 1.50 0.73
I
Table 2: Aerodynamic Multipliers -;L(ft)
Tile 2.(f ) ;L( )
Profile Batten Application Direct Deck Application
Barrel High Profile Concrete Tile N/A 0.23
Table 3: Restoring Moments due to Gravity-Mg(ft4bf)
Tile 2":12" 3":12" 4":12" 6":12" 6":12" Greater than
Profile
7"•92„
Barrel High Direct Deck Direct Deck Direct Deck Direct Deck Direct Deck nirf t t Deck
Profile 5.66 5.56 5.43 5.25 601 4.72 I
Concrete
Tile
Table 6: Attachment Resistance Expressed as a Moment-Mf(ft-lbf) 1
for Single Patty Adhesive Set Systems 1
Tile Tile Application iidirimum Attachment I
Profile Resista.ic.E I
Barrel High Profile Concrete Tile Polyfoam Poi _ro AH 160Tm 77.877
1 Paddy placement of 37 grams of Polypro AH 160TM for pan the 17.5 grams on each side for cap tiles.
NOA No.: 12-0207.02
Expiration Date:03/14/17
Approval Date:05/31/12
Page 3 of 5
5. LABELING
All tiles shall bear the imprint or identifiable marking of the manufacturer's name or logo (See Detail
Below),or following statement: "Miami-Dade County Product Control Approved".
LRT
LAMOTI BARREL CONCRETE TILE LABEL
(LOCATED ON UNDERSIDE OF TILE)
6. BUILDING PERMIT REQUIREMENTS
6.1 Application for building permit shall be accompanied by copies of the following:
6.1.1 This Notice of Acceptance.
6.1.2 Any other documents required by the Building Official or applicable building code in order to
properly evaluate the installation of this system.
NOA No.: 12-0207.02
Expiration Date:03/14/17
Approval Date:05/31/12
Page 4 of 5
PROFILE DRAWINGS
�—
71'
_ 8.75"
21,
O 2„
1 -I- -
1 I
O i
1 I
1 i
1 I
1 I
1 i
1 I
18"
1 eoNOU�c
1 I
1 I
1 I
1 I
1 I
1
I I
3"
soNDM
locus
2"
8.75"
8.75"
LAMOTI ROOF TILE"BARREL CONCRETE TILE"
END OF THIS ACCEPTANCE
cm NOA No.: 12-0207.02
Expiration Date:03/11117
Approval Date:05/31/12
Page 5 of 5
t'WAA CT CONTROL SECTION
BUILDING AND NEIGHBORHOOD COMPLIANCE i XWt ')\� 2t1 Street Room 20 ,
BOARD AND CODE ADMINISTRATION DNISION Miami. l_iorida 33,75-2,t7,
;,X 6 j 3 i`-2 590 I'(786 i',15-2 i 99
NOTICE OF ACCEPTANCE (NOA)
Polygiass USA Inc. -- —
1 S0 Lyon Drive
l:ernley,NV 89408
SCOPE:
This NOA is being issued under the applicable rules and regwations governing the use of construction materials.
The documentation submitted has been reviewed and accepted by Miami-Dade County BNC - Product Control
Section to be used in Miami Dade County and other areas where (allowed by the Authority Having Jurisdiction
(AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control
Section (In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right
to have this product or material tested for quality assurance purposes. if this product or material fails to
perform in the accepted manner, the manufacturer will incur the expense of such testing and
the AHJ may
� p b y
immediately revoke, modify, or suspend the use of such product or material within their jurisdiction. BNC
.I
reserves the right to revoke this acceptance, if it is determined by Miami-Dade County Product Control
Section that this product or material fails to meet the requirements of the applicable building code.
This product is approved as described herein,and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Polyglass Polystick Underlayments
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo. city,state and
following statement: "Miami-Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there nas been no
change in the applicable building code negatively- atTecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change to the
materials, use,and/or manufacture of the product or process. ,'disuse of this NOA as at,endorsen-tent of any
product,for sales,advertising or any other purposes shall automatically terminate this NOA. Failure to comply
with any section of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by
the expiration date may be displayed in advertising literature. If anz portion of the NOA as displayed, then it shall
be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors
and shall be available for inspection at the job site at the request of the Building Official.
This renews and revises NOA#09-0806.07 and consists of pages i through S.
The submitted documentation was reviewed be Aiee
NOA 'ma : t-J-0601.10
F,apir30o3s Date. 09113Ao
Approvs: bate: 09/15111
Page I of S
ROOFING COMPONENT APPROVAL
Category: Rooting
Sub-Cateaorv: Underlayment
Material: SBS . APP Self-Adhei-inp N1,)d1iieli
PRODUCTS DESCRIPTION:
Teo t Pr�� tie y
Pr_ oduct Dimensions Soeeificatior l�escri, tflon
Polystick MTS Roll: Fl;s 103 A h'Oniogeneous. rubberized asphalt
underlayment 65'8"x 3-3--'/,'- waterproofing membrane,glass fiber reinforced
Manufacturing Location 60 mils thick With polyolefinic film on the upper surface for
#2 use as an underlayment for metal roofing, root`
tlx:. siate tiles and shingle underlayment.
Polystick iR-Xe Roll: rAS 10') and A fine granular/sand top surface self-adhering.
underlayment 65' x 3'34,'" ;\STM D 1970 APP polymer modified, fiberglass reinforced,
Manufacturing Location Or 65 x 3 bituminous sheet material for use as an
#1 & 42 80 mils thick underlayment in sloped roof assemblies.
Designed as an ice& rain shield and as a flat
roof file underlavment.
Polystick TU Roil: f AS 103 anu A heavy granuied surface self adhering, APP
underlayment 32'10"x 3'3-'/s° ASTM D 1970 polymer modified. fiberglass or polyester
Manufacturing Location 100 mils thick reinforced, bituminous sheet material for use as
#1  an underlayment in sloped roof assemblies.
Designed as a a roof tile underlayment.
Polystick TU Plus Roll: TAS 103 and A non-wicking fabric :surfaced, self-adhering,
underlayment 65' x 3'3-'/," do i iivi b i 976 APP polymer modified, fibergiass reinforced
(Facer of Membrane 80 mils thick with a high strength polyester fabric, bituminous
with surface printing) sheet material for use an an underlayment in
Manufacturing Location sloped roof assemblies. Designed as a metal
#1 & #2 roofin,t and ror9ftile underlayment.
Polystick TU P Roll: TA 10') ano A rubberized asphalt waterproofing membrane.
underlayment 32'l 0"x 3"3-'/g" ASTM D 1970 glass-fiber/polyester reinforced, with a granular
Manufacturing Location 130 mils thick surface designed for use as a the roof
#2 underlavment.
Polystick Tile Pro Roll: ±AS 10:a am A rubberized asphalt self-adhering
Location 61 x 3'3 / ' ASTM D 197(; fiber/polyester reinforced waterproofing
#2 60 mils thick membrane. Designed as a metal rooting and roof
NOANo.: 11-0601.10
:ile unt3er1a��7�ent.
t Expiration Live: 09/13/16
Approval Date: 09/1511!
Page 2 of 8
PRODUCTS DESCRIPTION:
esr Product
Product Dimensions ec Descl irstio
Poiystick Dual Pro Roll: 5+ ° 's'%; k ruhbenzeu asphait wit-adhering. gtass-
AfaintfacluringLocation 61' x 3"3-'r' " `iberrp:,lvesrer r•einl'orced watcrproofinu
60 mils thick mennnrane. specific Il'or use as a high
remrperwure c�r3�lerlrvmen2. Designed as a metai
i i)UriSlfi>.
MANUFACTURING PLANTS:
i. Hazelton, PA
2. Winter Haven, FL
EVIDENCE SUBMITTED:
Test Aaency Test Identifier Test Narne/Report Date
Exterior Research& Design, LLC 1 1756.04.0 i-i TAS 103 04/27/01
1 1756.08.0 i-r ASTM D 1970 08/14/01
02.202.08.Of TAS l 03 08/29/05
Trinity ERIa P-5 1 10.08.07 TAS 103 08/29/07
P108'0.09.08-R i AS 10:3 12/04/08
P10870.04.0() FAS 103/ASTM D4798 &,G 15-5, 04/13/09
P33360.06.I0 ASTM D1970 07/01/10
P33370.03.' 1 TAS 103 03/02/11
P36900.09.i 1 TAS 10,/ASTM D4798& G155 09/01/11
PRl Asphalt Technologies PRI01 1 1 ! :ASTM D 4977 04/08/0?
PUSA-005-02-01 ASTM D 4977 01/31/02
PUSA-018-02-01 ASTM D 2523 07/14/03
PUSA-035-02-0; TAS 103 09/29!06
PUSA-033-02-01 ASTM D 1970 01/12/06
PUSA-055-02-02 TAS 103 12/10/07
PUSA-083-02-61 TAS 10_, 06/30/08
PUSA-089-02-01 t'AS 103/ASTM D4798 & G 155 07/06/09
Momentum Technologies, Inc. JX20H7A AS 103/ASTM D4798 & G155 04/01/08
RX 14E8A TAS 103/ASTM D4798 & G 155 11/09/0()
DX231386 TAS 103/ASTM D4798& G155 02/18/10
DX23D8A TAS 103/ASTM D4798 cot, G 155 02/181110
NOA No.: 11-0601.10
xpiration Date: 119/13/16
A9pvc%ai Dam: 09/15/11
Page 3 of F
. .
,
I .
- ------~--'~
,
Deck Type 1: VVmmd.00n- nyulatco
Base Sheet: One or more plies of /+�]'��
Fumvemmmg: pwcFBC |5\0.2 & | io. n^ ^� u| u `nmmuon �' heud :sp. (tor
� hameob���onh/)
� INMemmbrame: Polystick membrane,—, y�//��hc,�o
Smr6Acing: None
� 1' All nails iu the deck shall be carefully checked for puurudingneuds. Re-fasten on` loose decking panels.
and sweep the deck thoroughly murenio`eany auyi anddebria .ijvrtoupp|icaduo
� 3. Place the underlayment over metal drip edge in accoroaucc *ith R/\S ( | /,
3. Place the first course ofmembrane pao/||c| to the cuwe. rolling the membrane to obtain mmxjnnum contact.
Rmn�unwthe release�boms the o�eo�brancixapplied. AUside laps ahuUheamininmunnnf3-�-and e-- '
laps shall beaodo�munm of 6." Roll the membrane into p}uur after remnovmgthe pc}eayc strip. Vertical —
� u�mJqpb��uf the roof vvbhPo6mtic% iyacceptable- ��embraoeshall he back nailed in accordance`viU
applicable buddingcode.
'�
4. When applying the membrane in the valley. start m1the low point and work io tile high point. rolling the
membrane from the center outward in both direction,,,-,
For ridge applications,center the membrane anci roi I t�oin ine center outward in borh directions.
6` Roll or broom the entire membrane surface so as to iiave ful! contact with the SUriace.giving special
at*:otmo to lap areas.
7' Flash vent pipes,stacks.chimneys and penetrations /n compliance with Roof Assembly current Produvz
Control Notice nf Acceptance.
8. All protrusions or drains shall be initially taped w/Nu6" piece of� ' �'e flashing�e—�—a be
pressed in place and formed around the pro/nakm to ensure a tight [h. / laver of Polystick shall he
applied over the underlayment.
N0.4 No.. 11'0601.10
� 6^pinuiiovDaw:: iYau
Appm),a) Dmue, 09/15/11
Page 4 of
G F dERAL(..IMITATIONS:
1, Fire classification is not part of this acceptance.
Polystick MTS,TU Plus,and Tile Pro may be used in az pnaltic. -,93sngk� 3. ,,ci0d ",ila; es anCi si3ialgie5, 110:i-
structural metal roofing, roof tile systems and quarry slate- rool assembl E'-Xc. TL. and TU P may be uses,
in all the previous assemblies listed except metal rooticll-. Duai Pro nlav t)e used ir, all the Previous
assemblies listed except roof the systems.
3. Deck requirements shall be in compliance with applicable �)c� c ag code
ce
4. Polyglass Polystick membranes shall be applied to a smocatn. -lean and erg surface. The deck shall be tree of
irregularities.
Polyglass Polystick membranes and underlayments shall =lcx nee adhered dir¢'ctk, o, e.r a pre-existing roof
membrane as a recover system.
6. Polyglass Polystick membranes shall not be left exposed as a temporary roof for longer than the amount of
days listed in the table below after application. Polyglass reserves the right to revise or alter product
exposure times; not to exceed the preceeding maximum time limitations.
Exposure Limitations(days)
MTS 1R-Ke TU TU Plus TU P Tile Pro Dual Pro
Winter Haven FL. 180 180--T 180 180 180 180 180
Hazelton,PA. N/A 30 30 180 N/A N/A N/A
7. All products listed herein shall have a quality assurance audit In accordance with the Florida Building Code
and Rule 913-72 of the Florida Administrative Code.
8, in roof tile application,data for the attachment resistance of roof tiles shall be as set forth in the roof tile
manufacturer's Notice of Acceptance. Polystick TU and TU Plus may be used in both adhesive set and
mechanically fastened roof tile applications. Polystick IR-Xe. and Tile Pro are limited to mechanically
fastened roof tile applications. Polystick MTS is limited to mechanically fastened with battens roof tile
applications. Polystick TU P may be used in both adhesive set and mechanically fastened roof tile
applications with the exception of mortar set tile applications.
9. The maximum roof slope for use as roof tile underlayment for(direct-to-deck)tile assemblies shall be as
I
ollows: (See Table Below)
i Tile Profile Polystick MTS Polystick IR-Xe 1 Polystick TU,TU
11 Plus,TU P,The Pro i
i
Fiat Tile Prohibited without battens :12 1 No limitation
Profiled Tile Prohibited without battens : Prohibited No limitation
The above slope limitations can be exceeded only, by using battens and counter battens in accordance with the
Approved Tile System Notice of Acceptance and applicable Florida Building Code requirements. Battens
are required for both loading and installation of tiles at all times.
NOA No.: H-0604.10
f°cpirntion Date: 09/13/16
Approval Date: 09/15/11
Page 5 of S
�
�
� '5F_NE%�A|L : `_ - -_N-__'�
l0
Care should be taken during the loading procedure tokeeobxuzxaf6ou` m /n"'xn"'nx.mmu,u'duroppnIV /`/
dk:directly oothe Refer to9bh«zb�m- Tile' loading dciu�� b�iow /`x xoaJing procedure fhraD
underlayments except PokmticdkMT8 which shall be loaded onto oarunp�
mvm1mmnum
---------- (o Max Per s^rm}
^L 12
u
'
� wflh
POUSTI"Tu Plus
M Refer to prepared roofing system Product Control Notice wfAcceptance for
with specific prepared roofing products. 9olyodukMT8, 0-}{e. TQ. Tu Plus, TU F. C)ou/ Pro and Tile Pm
may bc used with any approved roof covering Notice uf Acceptance listing Pol}utiuL MTS. lR-X*'TU. 7L
Plus,J'D p,Dual Pro and Tile Pro as a component part ofao umncnmb|y in the Notice of Acceptance. If
� pnbmdokK8T8, {R-Xe` TU,TU 9lum, TlJ P, Dual Pro and Tile Pro is not |iszed- om:queotmoybeooedcoorhe
�
Authority Having Jurisdiction(AHJ)or the Miami-Dade County Product Control Department for approval
provided that appropriate documeotationiupmovidedtodutaUc*mputibi)it} mf the products. wind uplift
resistance,and fire testing cesubo.
L All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or logo.
city and state of manufacturing facility and the following statement: "Miami-Dade County Product Control
Approved"or the Miami-Dade County Product Control Seal as shown belov,
BUILDING PERMIT REQUIREMENTS:
Application for building permit shall be accompanied by copies of the followdlt�
1. This Notice of Acceptance.
2.Any other documents required by the Building Official or applicable bultding code in order to properly evalLiate
the installation of this materials.
NOA No,: 11-0601.10
APPr('m 9111c: 09/15/11
. . .
~
PnLYGLAss GENERAL APPLICATION �������/����'� ��E!Nflr,, z'APVEB:
Polyglass does accept the direct application o� �u/ea/c` um�:ur:vcnc �n�nn�r zcx u` v`ood d�uks inswiens
are cautioned to refer to applicable local buiiGiiw �ocies p'-Iorvc, dlro_� deck installation to ensure this is
acceptable. Please also refer Voapplicable Prnunc( 'o IX)omi//.�! ynx1uux
2. All rolls, with the exception of Polystick TU Pmssbnum oc ouc.,�-nu^iec; m m;|vageedgt seunius per Polyp-lass
Back Nailing Guide. Nails shall be, | 1 gauge ring shmnk type. appU*rivvirkuminimun/ i-mmo| dimkuy
required in Dade County mr simplex type nao usctrler,,�is,� /n other regions. at minimum rate n-/2~oz. Polystick TI/ Plus should be back nu,|�, o� dr,i d `oaJ�
pu/uul'avu''op
the face of membrane, with the above stated nxi{y and/or dieks, The head lap mrn`b,ono is xr cover the area
being buuk-oa[led. (Please retertoapplicable moui hui|6bi,.� cndem prior to installation.>
3' All eeu| lap seams laps)must be rolled with u nand roller to eomunc full contact
4. All fabric over fabric;and granule over granule end laps. »hu|| have u 6" wide, uni{orni ofPolyglass
Pokp}oa 55 Premium Modified Flashing Cement. Poly-ioss Po|yp|ue 50 Premium MB F|uxbiogCeuumnL
Polyglass PG500 MB Flashing Cement. Mule-l-fide 24 1 Premium Modifleii Flashing Cement. Mule-Hide 251
Premium Wet/Dry G)mstomedc F)umbiog Cement. or k8u/c'Hide4_2| k1ud Bit Flashing Adhesive Trowel
Grade mastic,applied {n between the application of the lap. /*b* Use of mastic between the laps does not upp{}
nnPo/ymt/ckMTS.
5. A nluxirounn mf6tiles per stack are allowed when mmding ri|c'`o the uude/im?menm. Refer to the Po|yg|uxs
Tile Loading Guidelines. See General Limitations #Pund0-(U
6, Battens and/or Couoterhattenn`mxrequired h}'the Tile monutmcn/rr,s W()A's, must he used onail prQjects for
pitch/slopes uf7-Y\2"nrgreater. It isuuggemted d/a1nn pitch/slopes in axueyo nfb k\-/!2-. precautions
should be taken,such as the use of battens to prevent zile sliding during the loading process.
7. Minimum cure time after membrane installation & bedo/e >uudio�ofrow�o�tiles isForty-Eiobt(4W) 8oum
8. 9obmtick membranes may not be used in anyoxpoaag upp|iuunuo such as crickets.exposed valleys.or
exposed roof tm wall details.
9' Repair ofPmh/mtick membranes iutobcaccomplished by applying Po|y8iasxPn|yp|uo55 Premium Modified
Flashing Cement, Poh/glaoe Pnlyplwe 50 Premium MB Flashing Cement. Poly \mxs PQ500 MB Flashing
Cement. Mule-Hide 241 Pnomoinno Modified Flashing Cement. Mule-Hide 251 Premium Wet/Dry B}amtomeric
Flashing Cement,or Mule-Hide 42l Mod Bit Floshioo /kdhcuive Trov/e| Grade mastic 10 the area iu need of
repair, followed 6vupatch of the Po|yn iok material of like k,ind should he set and hand rolled in place over
the area needing such repair. Patching membrane sho/| be Li minimum of6 inches in either direction. The
repair should be installed iu such a way mnthou *aterwill rur parallel toor Over the top ofall laps ofthe
patch.
� 10, All self-adhered membranes must be rolled on cnaunc tu/l auniucr with approved substrates. Poly#lamy
�
requires mroioimnuoo of 40 lba for aweighted n`||er t6rzhc rolling ofthe field membrane. Hand rollers are
acceptable for rolling of patches or small areas ofzheroof 8noomink, nneN, he used where slope prohibits
rolling.
11. All approved substrates should be dry, clean and pnmper{\ prepared. before any application o[Pn|ymock
membranes commences. An approved uubo\ruoc technical bu|iedo can oe furnished upon request. It is
recommended to nef* toapp|ipuhk:building codes prior to installation to verif�acccptub|e substrateu.
12. The Pmh/u|usm Miami-Dade Notice of Acceptance (y"OA) nppnmvulhxrPo|!aiok membranes and
Pm}yProm:utorDDLcan be furnished upon request h} our Technical Services Department 6! calling | (800)
844-4563.
NOA Nm�: �x'0601.11)
L^ iootiom 1�iiov: 09113V!6
Appnvvmi Dxve:'00/15V1/
13. Questions in regards to the appii,-ati,w ce-
Department at 1 (800) 894-4563.
14. Polyglass recommends that applicators �)ra;TlLe no applicable procedures as ow,1111UC
by the National Roofing Contractors, Assuc tat i Lw
PLEASE CHECK WITH LOCAL BUILWNC, CODE. REGARDING UB,41TkT10(NTS OF SPECIFT('
APPLICATIONS. LOCAL CODES N11A v SbPFkSEDF F%Nf)
RECOMMENDATIONS.
END OF THIS ACICEPTANCU.
',,;0A Nc,,: 11-0601.16
Date; 09/131k,
-�ppravaf Date: 09/15/1
Page 8 of