RF-11-851Inspection Worksheet
Miami Shores Village
10050 N.E. 2nd Avenue Miami Shores, FL
Phone: (305)795 -2204 Fax: (305)756 -8972
Inspection Number: INSP - 159667 Permit Number: RF -5 -11 -851
Scheduled Inspection Date: June 08, 2011
Inspector: Bruhn, Norman
Owner: AKERMAN, SANDRA
Job Address: 1170 NE 100 Street
Miami Shores, FL 33138-
Project: <NONE>
Contractor: QUALITY ROOFING CONTRACTORS INC
Permit Type: Roof
Inspection Type: Final Roof
Work Classification: Flat
Phone Number
Parcel Number 1132050190400
Phone: (305)953 -3333
Building Department Comments
RE -ROOF TO A NEW FLAT MINERAL CAP SHEET ROOF
Passed G��d
Failed
Correction
Needed
Re- Inspection
Fee
No Additional Inspections can be scheduled until
re- inspection fee is paid.
Inspector Comments
CL-
June 07, 2011
For Inspections please call: (305)762 -4949
Page 12 of 24
RE: Permit# RF -5 -1 1 -851
Miami Shores Village
Building Department
10050 N.E.2nd Avenue
Miami Shores, Florida 33138
Tel: (305) 795.2204
Fax: (305) 756.8972
DATE: May 24, 2 011
INSPECTION AFFIDAVIT
Carlos Arocho licensed as a (n) Contractor / Engineer / Architect,
(Print name and circle License Type)
License #: 000017889
On or about May 24, 2 01 1
(Date & time)
Secondary water barrier work at 1170 N.E. 100 Street Miami Shores, Fl 33138
FS 468 Building Inspector
, I did personally inspect the roof deck nailing and
(Complete Job Site Address)
Based upon that examination I have determined the installation was done according to the Hurricane Mitigation Retrofit
Manual (Based on 553.844 F.S)
Signature
State of Florida
County of Dade:
The undersigned, being the first duly swom, deposes and says that he /she is the contractor for the above property
mentioned.
Sworn to and subscribed before me this
day of 02-01,/
NOTARY PUBLIC-STATE OF FLORIDA
" Marylou Hernandez
Notary Public, Sate of Florida at Large Commission #DD930046
%;; ;••' Expires: OCT.10, 2013
BONDED THEO ATLANTIC BONDING CO., INC.
'General, Building, Residential, or Roofing Contractors or any individual certified under 468 F.S. to make such an inspection. Include photographs of each plane of the roof with
permit # and address # dearly shown marked on the deck for each inspection
Revised on 5/21/2009
NOTICE OF COMMENCEMENT
A RECORDED COPY MIT BE POSTED ON THE JOB SITE AT TIME OF FIRST NEFECICN
PERMITNO. TAX FOLIO NO.11- 3205- 019 -0400
STATE OF FLORIDA..
COUNTY OF MIAMI -DADE
THE UNDERSIGNED hereby gives notice that improvements will be made to certain real
property, and in accordance with Chapter 713, Florida Statutes, the followir �vEV t
is provided in this Notice of Commencement
By
11111111111111 1111111111111111111111111111111
CFN 201180326177
OR Bk 27692 Ps 27501 (fps)
RECORDED 05/18/2011 11:44:35
HARVEY RUVIti? CLERY. OF CURT
MIAMI -DADE COUNTY, FLORIDA
LAST PAGE
STATE OF FLORIDA, COUNTY OF DAut
1 HEREBY CERTIFY that this is a °°PY of l'
A D
Canty OmIS
! : 7 D.C.
rid ♦P' : P Seel.
LERK, +° «
a
i
/1
1. Legal description of property and street/address: 1170 N.E. 10 0 Street
'Miami Shores, F1 33138
2. Description of improvement: Reroof to a new Flat . Mlneral Cap sheet roof .
3. Owner(s) name and address: Sandra Alterman
1170 N.E. 100 Street Miami Shores, F1 33138
Interest in property: °shier
Name and address of fee simple titleholder: N/A
4. Contractor's name and address: Ouality Roofing Contractor, Inc.
13800 N.W. 1st Ave Miami F1 33168
5. Surety: (Payment bond required by owner from contractor, if any)
Name and address: N/A
Amount of bond $ 00
6. Lender's name and address: N/A
7. Persons within the state of Florida designated by Owner upon whom notices or other documents may be served as
provided by Section 713.13(1)(a)7., Florida Statutes,
Name and address' N/A
8. In addition to himself, Owners designates the following person(s) to receive a copy of the Llenor's Notice as provided
in Section 713.13(1)(b), Florida Statutes.
Name and address: N/A
9. Expiration date of this Notice of Commencement: (the expiration date is 1 year from the date of recording unless a
rent date is sp :. ed
Signature of Owner
Print Owner's Name
Sworn to and subscribed before me this >f 0 day of
Notary Public
Print Notary's Name
My commission expires.
113'°139 8104 PAGES
NOTARY PUBLIC -STATE OF FLO ' I A
,. Marylou Ilernandez
E , a gCommission #DD930046
Expires: OCT. 10, 2013
BONDED THRU AMAIN-TIC BONDING CO., INC.
Prepared by Marylou Hernandez
20� -�--• Quality Roofing Contractor
Address: 13800 N.W. 1st Ave
Miami, Fl 33168.
(305) 953 -3333
SlitiVIG,‘ Miami Shores Village
Building Department
10050 N.E.2nd Avenue, Miami Shores, Florida 33138
Tel: (305) 795.2204 Fax: (305) 756.8972
INSPECTION'S PHONE NUMBER: (305) 762.4949
BUILDING
PERMIT APPLICATION
FBC 20
Permit Type: BUILDING
Owner's Name (Fee Simple Titleholder)
OOFING
Sandra Akerman
Permit No.
MAY ?
Master Permit No.
Phone# (305) 757-1943
Owner's Address 1170 N.E. 100 Street
City Miami Shores State p1 Zip 33138
Tenant/Lessee Name Phone #
Email
Job Address (where the work is being done) 1170 N. E. 100 S t r e e t
City Miami Shores Village
FOLIO / PARCEL # 11-3205-019-0400
County Miami -Dade Zip 33138
Is Building Historically Designated YES
NO x
Flood Zone
Contractor's Company Name Quality Roofing Contractor Phone # ( 305) 953 -3333
Contractor's Address 13800 N . W. '1 st Avenue
City Miami
Qualifier Name
Carlos Arocho
State Fl
Zip 33168
Phone# (786) 367 -2029
State Certificate or Registration No. RC 0 0 5 8 6 2 7 Certificate of Competency No. 000017889
Contact Phone Marylou & Carlos E -mail qualityroofing88 @yahoo.com
Architect/Engineer's Name (if applicable)
Value of Work For this Permit $
Type of Work: ['Addition
Describe Work: Reroof to
Replace an
Phone #
10,000.00 Square / Linear Footage Of Work: 8 0 0 sqf t.
['Alteration ❑New a Repair/Replace ❑ Demolition
a new flat mineral cap sheet
d reinforce broken and loose
roof.
tiles
on tile roof.(IAS 441
* * * * * * * * * ** * * ** * * * * * * * * * * **** * * * * * ** Fees************* * * * * * * * * * * * * * * * * * * *** * * * * * * * * **
Submittal Fee $ ) Permit Fee $ C9 (1?1 CCF $ CO /CC $
Notary $
Scanning $ Radon $
Double Fee $
Structural Review. $
Training/Education Fee $
DPBR $
Violation date:
Technology Fee $
Bond $
Total Fee Now Due $
See Reverse side -*
Bonding Company's Name (if applicable)
Bonding Company's Address
City State Zip
Mortgage Lender's Name (if applicable)
Mortgage Lender's Address
City State Zip
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING, SIGNS,
WELLS, POOLS, FURNACES, BOILERS, HEATERS, TANKS and AIR CONDITIONERS, ETC
OWNER'S AF F II)AVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF
COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR
IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN
FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE
RECORDING YOUR NOTICE OF COMMENCEMENT."
Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subject to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site
for the first inspection which occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the
inspection will not be approved and a reinspection fee will be charged.
:61.! ,p kEeR Y'ei
Owner or Agent
The foregoing instrument was acknowledged before me this /0
day of , 20 II , by Sa41,4 rek, kke
who is personally lac own to me or who has produced
As identification and who did take an oath.
NOTARY PUBLIC:
Sign:
Print:
My Commission Expires:
NOTARY PUBLIC 'ATE OF FLORIDA
' Marylou Hernandez
Commission #DD930046
Expires: OCT. 10, 2013
BONDED THRL ATLANTIC BONDING CO., INC.
Signature
Contractor
The foregoing instrument was acknowledged before me this /0
day of died , 201 I , by (44- Jo fro c
who is personall own to me or who has produced
as identification and who did take an oath.
NOTARY PUBLIC:
Sign:
Print:
° Ida I011 f OFFLORIDA
My Commission Expires ' : ry ernandeZ
Common #DD930046
Borg Expires: OCT.10 201
IDTHRUATLA`TICBO \DL�G,O. C3
******************************************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** Yak ,Y,Y*** *,Y�k,Y,Y,int,Y�Y*1***
APPROVED BY
Plans Examiner Zoning
Engineer
(Revised 07 /10 /07)(Revised 06/10/2009)
Clerk checked
Miami Shores Village
Building Department
10050 N.E.2nd Avenue
Miami Shores, Florida 33138
Tel: (305) 795.2204
Fax: (305) 756.8972
OWNERS'S AFFIDAVIT OF EXEMPTION
ROOF TO WALL CONNECTION HURRICANE MITIGATION RETROFIT FOR EXISTING SITE -
BUILT SINGLE FAMILY RESIDENTIAL STRUCTURES
PERSUANT TO SECTION 553.844 F.S.
To: Miami Shores Village Building Department
10050 NE 2nd Ave
Miami Shores, Fl 33138
Re: Owner's Name: Sandra Akerman
Date: 5/9/11
Property Address: 1170 N.E. 100 St. Miami Shores, Fl 33138
Roofing Permit Number:
Dear Building Official:
Sandra Akerman certify that I am not required to retrofit the roof to wall connections of my
building because:
' The just valuation for the structure for purpose of ad valorem taxation is less than $300,000.00. Please attach proof of ad
valorem taxation.
o The building was constructed in compliance with the provisions of the Florida Building Code (FBC) or with the provisions
of 1994 edition of the South Florida Building Code (1994 SFBC)
Signature
State of Florida
County of Dade
The undersigned, being the first duly swom,
Sworn to and subscribed before me this
Notary Public, Sate of Florida at Large
CkN'kc \\-\ )(1,\A
Print Name
deposes and says that he /she is the owner for the above property mentioned.
/0 da of t/ . qtr
NOTARY PUBLIC•STATE OF FLORIDA
kit Marylou Hernandez
Commission #DD930046
Expires: OCT. 10, 2013
rtlikU ATLANTIC BMING CO.,INC
• When the just valuation of the structure for purpose of ad valorem taxation is equal to or more $300,000.00, and the building was not constructed with FBC nor a 1994
SFBC. Then you must provide a building application from a General Contractor for the Roof to Wall connection Hurricane Mitigation.
Revised on 5/21/2009
Miami Shores Village
APPROVED
BY
DATE
ZONING DEPT
BLDG DEPT
;t 111 11 (I I() COMPLIANCE WITH ALL FEDERAL
, WI AN!) CU)1 IN !Y RULES AND REGULATIONS
SECTION R4402.13 I t --
HIGH VELOCITY HURRICANE ZONES — REQUIRED OWNERS NOTIFICATION FOR ROOFING
CONSIDERATIONS
R4402.13.1 Scope. As it pertains to the section, it is the responsibility of roofing contractor to provide the owner
with the required roofing permit, and to explain to the owner the content of the section. The provisions of Section
R4402 govem the minimum requirements and standards of the industry for roofing system installations.
Additionally, the following items should be addressed as part of the agreement between the owner ant the
contractor. The owner's initial in the designated space indicates that the item has been explained.
1. _ Aesthetics- Workmanship: the workmanship provisions of Section R4402 are for the purpose of
providing that the roof system meets the wind resistance and water instruction performance standards.
Aesthetics (appearance) are not a consideration with respect to workmanship provisions. Aesthetic issues
such as color or architectural appearance, that are not part of a zoning code, should be addressed as part of
the agreement between the owner and the contractor.
2. Renailing wood decks: When replacing roofing, the existing wood roof
renailed in accordance with the current provisions of Section R4403. (The roof deck is
to removing the existing roof system).
3. Common roofs: Common roofs are those which have no visible delin
units (i.e., townhouses, condominiums, etc.) In buildings with common roofs, the roeti
owner should notify the occupants of adjacent units of roofing to be performed.
4. Exposed Ceiling: Exposed, open beam ceilings are where the underside of the roof decking can
be viewed from below. The owner may wish to maintain the architectural appearance; therefore, roofing nail
penetration of the underside of the decking may not be acceptable. This provides the option of maintaining the
appearance.
5. Ponding water: The current roof system and /or deck of the building may not drain well and may
cause water to pond (accumulate) in low-lying areas of the roof. Pounding can be an indication of structural
distress and may require the review of a professional structural engineer. Pounding may shorten the life
expectancy and performance of the new roofing system. Pounding conditions may not be evident until the
original roofing system is removed. Pounding conditions should be corrected.
6. S �1 Overflow scuppers (wall outlets): It is required that rainwater flows off so that the roof is not
overloaded from a buildup of water. Perimeter /edge wall or other roof extension may block this discharge if
overflow scuppers (wall outlets) are not provided. It may be necessary to install overflow scuppers in
accordance with the requirements of Sections R4402, R4403 and R4413.
7. Ventilation: Most roof structures should have some ability to vent natural airflow through the
interior of the structure assembly (the building itself). The existing amount of attic ventilation shall not be
reduced. It may be beneficial to consider additional venting which can result in extending the service life of the
roof.
Owner /Agent's Signature Date
Revised on 7/9/2009 LD
D/of 1( ,mil'o! /1
Contractor Signature Date
■ ■1111 ■ ■ ■1111■ ■1111■ ■■ ■ ■M■ ■ ■ ■ ■ ■■
■ ■ ■■ ■■ ■■ ■■ ■ ■■1■ ■M■11■ ■■1111■ ■ ■1
■ ■ ■ ■ ■I�i�ir ■�iG�� � ■ ■ ■!�' 1111 ■I
■ ■■ ■ ■■■■ PAIM ■■ ■ ■■ ■ \•1■1111■■
1111■ ■ ■ ■ ■■ EIMI ■■1! ■■ ■ ■11 ■ ■ ■ ■ ■t
1111■ ■1111 ■■i1■■■ : ■I CIE 1111 ■t ■■ ■ ■ ■j
■ ■ ■ ■ ■ ■■ ■111 ■ ■ ■vI��MR��I \ ■�I ■ ■ ■ ■ ■:
E■•■•■ ■ ■■1111111:���11101•�1■ \1111■■■■!
111111 ■ ■ ■■ ■21. mmm.11� \ ■ \I■■ ■ ■■
1111 ■■■ ■1 ■1111 ■ ■■ ■■M■\.I■ ■ ■■
■ ■ ■ ■ ■ ■ ■ ■ ■I■ \ ■ ■ ■ ■� ■�►q� ■� 1111 ■a
■1111111■ ■■ ■■ ■I■\ eII MINI \\ \1111■+
■ 1111 ■ ■ ■ ■1 ■ ■I ■ ■��r�� ■�� ■ ■ ■,
11•■ ■■11■■ ■I■/ / ■■ ■iii ■ ■M11 \ ■ ■ 11•
■ ■ ■ ■ ■ ■ ■ ■ ■I ►1111■■ � ■� ■ ■ ■ ■■
ROOF ASSEMBUES AND ROOFTOP STRUCTURES
Florida Building Code Editio 2007
High - Velocity Hurricane Zone Uniform Permit Application Form.
Section A (General inform ti
Master Permit No. Process No.
Contractor's Name Quality Roofing Contractor, Inc.
Job Address 1 170 N.E. 100 Street Miami Shores, Fl 33138
gi Low Slope
❑ Asphaltic
Shingles
ROCE-CATEGORY
❑ Mechanically Fastened The
❑ Metal Panel/Shingles
❑ Prescriptive BUR -RAS 150
ROOF TYPE
❑ New Roof ■■ Reroofing ❑ Recovering
ROOF SYSTEM
INFORMATION
❑ Mortar /Adhesive Set Tile
❑ Wood Shingles /Shakes
❑ Repair ❑ Maintenance
Low Slope Roof Area (SF) 800 s q f t .Steep Sloped Roof Area (SF) N/A
Total (SF) 800sqft.
Section =ti ( o •off Plan
Sketch Roof Plan: Illustrate all levels and sections, roof drains, scuppers, overflow scuppers and overflow drains.
Include dimensions of sections and-levels, clearly identify dimensions of elevated pressure zones and location of
parapets.
FLORIDA BUILDING CODE — BUILDING
Fiori- ra Building C
ROOF ASSEMBLES AND ROOFTOP STRUCTURES
de Edition 2007
High - Velocity Hurricane Zone Uniform ?emit Application Form.
Sed$ial, C (Low Slope ''`police <vn)
Fill in specific roof assembly corn •merats
and identify manufacturer
(if a component is not used, identify as "NA ")
•
Surfacing: N/A
Fastener S; clog for Anchor/Base Sheet Attachment:
Field: 9 " oc @ Lap, # Rows _2_- @ �_" oc
System Manufacturer: GAF Matrial Corporation
Perimeter: 6 " oc @ Lap, # Rows 4_ @ _6_12 oc
Product Approval No.: 07-1 21 9.0 9
Design Wind Pressures, From RAS 1-28 or Calculations:
Pmaxl: —49.2 Pmax2: —82.6 Pmax3: -124_3
Max. Design Pressure, from the'specific Product
pproval system: —52.5
Deck:
Type: wood
Gauge/Thickness: 1 X 6
Slope: .5
Anchor /Base Sheet & o. of Ply(s): N/A
Anchor /Base Sheet Fastener /= 'onding Material:
N/A
Insulation Base Layer: N/A
Base Insulation Size and Thickness: N/A
Base insulation Fastener / ondiing Material:
N/A
Top insulation Layer:
N/A
Top Insulation Size and Thickness: N/A
Top insulation Fastener / - onding
N�A
Base Sheet(s) & Jo. of Ply(s): 1 # 75 base
Base Sheet Fastener /Bonding terial:
1 1/4" R,JS nails 6" (@laps 7 rows 12"
Ply Sheet(s) & No of Ply(s): 2 Ply 4
Ply Sheet Fastener /Bonding Material:
Type 111 mopping asphalt
Top Ply: Minera 1 rap sheet
Top Ply Fastener/Bonding Material:
Type 111 mopping asphalt
FLORIDA BUILDING CODE— BUILDING
Comer: 6 " oc @ Lap, # Rows 4 @ 6 " oc
Number of Fasteners Per insulation Board:
Field N / A
Perimeter N/A Comer N/A
Illustrate Components Noted and Details as
Applicable:
Woodblocking, Gutter, Edge Termination, Stripping, Flashing,
Continuous Cleat, Cant Strip, Base Flashing, Counter -
Flashing, Coping, Etc.
Indicate: Mean Roof Height, Parapet Height, Height of Base
Flashing, Component Material, Material Thickness, Fastener
Type, Fastener Spacing or Submit
\
lit
Parapet
Height I
o/c
3
Mean i
Roof
Height ( •
in
BUILDING CODE COMPLIANCE OFFICE (BCCO)
PRODUCT CONTROL DIVISION
NOTICE OF ACCEPTANCE (NOA)
GAF Material Corporation.
1361 Alps Road
Wayne, NJ 07470
MIAMI -DADE COUNTY, FLORIDA
METRO -DADE FLAMER BUILDING
140 WEST FLAGLER STREET, SUITE 1603
MIAMI, FLORIDA. 33130 -1563
(305) 375 -2901 FAX (305) 375 -2908
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction
materials. The documentation -submitted has been reviewed by the BCCO and accepted by the Building
Code and Product Review Committee to be used in Miami Dade County and other areas where allowed
by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product
Control Division (In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County)
reserve the right to have this product or material tested for quality assurance purposes. If this product or
material fails to perform in the accepted manner, the manufacturer will incur the expense of such testing
and the AHJ may immediately revoke, modify, or suspend the use of such product or material within
their jurisdiction. BORA reserves the right to revoke this acceptance, if it is determined by Miami-Dade
County Product Control Division that this product or material fails to meet the requirements of the
applicable building code.
This product is approved as desdriibed• herein, and has been design :'! to comply with the Florida Building
Code and the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: GAF Conventional Built-Up Roof System for Wood Decks.
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state
and following statement: " Miami -Dade County Product Control Approved", unless otherwise noted
herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has
been no change in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or
change in the materials, use, and/or manufacture of the product or process. Misuse of this 1s/OA as an
endorsement of any product, for sales, advertising or any other purposes shall automatically terminate
this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of
NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and
followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is
displayed, then it shall be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Official.
This NOA renews and revises NOA No. 03- 0501.05 and consists of paged 1 throygh 19.
The submitted documentation was reviewed by Jorge L. Acebo.
NOA No.: 07- 1219.09
Expiration Date: 11/04/13
Approval Date: 03/20/08
Page 1 of 19
ROOFING SYSTEM APPROVAL
Cateaorv:
Sub- Cateaorv:
Deck Tvne:
Maximum Design Pressure
Roofing
BUR
Wood
-75 psf
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT:
TABLE 1
Product
Leak BusterTM MatrixTM
307 Premium Asphalt
Primer
GAF Mineral ShieldTM
Granules
Leak BusterTM MatrixTM
305 Fibered Asphalt
Emulsion
Leak BusterTM MatrixTM
303 Premium Fibered
Aluminum Roof Coating
LeakBusterTM MatrixTM
322 Elastomeric Roof
Coating
LeakBusterTM MatrixTM
Select Asphalt Emulsion
Fibered 306
Leak BusterTM MatrixTM
204 Wet/Dry Roof
Cement
RUBEROID® Modified
Bitumen Flashing
Cement
LeakBusterTM MatrixTM
201 Premium SBS
Flashing Cement
GAFGLAS® #75
Test
Dimensions Sueclfication
3, 5, 55 gallons ASTM D 41
60 & 100 Ib. bags ASTM D 1863
5 gallons ASTM 1227
1, 5 gallons ASTM D 2824
55 gallons
55 gallons
1, 5 gallons
5 gallons
5 gallons
ASTM D -4586
• ASTM D -3409
ASTM D 4586
Product
Description
Asphalt concrete primer used to promote
adhesion of asphalt in built -up roofing.
Granules for surfacing of exposed asphalt,
cold process cement or emulsion. GAF
Mineral ShieldTM Granules shall be used for
flashing applications only.
Surface coating for smooth surfaced roofs.
Fibered aluminum coating.
Elastomeric roof coating.
Asphalt emulsion fibered.
Refined asphalt blended with a mineral
stabilizer and fibers. Permits adhesion to
wet and dry surfaces.
Fiber reinforced, polymer modified Flashing
cement
ASTM D 4586 Asphalt flashing Cement
39.37" (1 meter) ASTM D 4601 Asphalt impregnated and coated glass mat
wide base sheet.
NOA No.: 07- 1219.09
Expiration Date: 11/04/13
Approval Date: 03/20/08
Page 2 of 19
Product
GAFGLAS® #80
ULTIMATM Base Sheet
GAFGLAS®
Flex PIyTM 6
GAFGLAS® Ply 4
GAFGLAS® Mineral
Surfaced Cap Sheet
GAFGLAS®
EnergyCapTM Mineral
Surfaced Cap Sheet
GAFGLAS
STRATAVENT®
EIiminatorTM Perforated
GAFGLAS® Flashing
GAFGLAS®
STRATAVENT®
EliminatorTM Naitable
RUBEROID ® SBS
Heat We1dTM Smooth
RUBEROID ® SBS
Heat- WeIdTM Granule
RUBEROID® SBS
Heat- We1dTM 170 FR
RUBEROID® SBS
Heat We1dTM PLUS
RUBEROID ® SBS
Heat- WeldIm PLUS FR
RUBEROID ® SBS
Heat We1drm 25
RUBEROlD® Modified
Base Sheet
Dimensions
39.37" (1 meter)
wide
39.37" (1 meter)
wide
39.37" (1 meter)
wide
39.37' (1 meter)
wide
39.17" (l meter)
wide
39.37" (1 meter)
wide
Various
39.37" (I meter)
wide
1 meter (39.37 ")
wide
1 meter (39.37")
wide
I meter (39.37")
wide
1 meter (39.37")
wide
1 meter (39.37")
wide
1 meter (3937")
wide
39.37" (1 meter)
wide
Test
Specification
ASTM D4601,
ASTM D 2178
ASTM D 2178
ASTM D 3909
ASTM D 3909
ASTM D 4897
D3672
ASTM D 4897
D 3672
ASTM D-6164
ASTIVI D -6164
ASTM D-6164
ASTM D -6164
ASTM D -6164
ASTM D -6164
ASTM D4601,
Type II, UL
Type G2 BUR
Product
Description
Asphalt impregnated and coated, fiberglass
base sheet
Type VI asphalt impregnated glass felt with
asphalt coating.
Type W asphalt impregnated glass felt with
asphalt coating.
Asphalt coated, glass fiber mat cap sheet
surfaced with mineral granules.
Asphalt coated, glass fiber mat cap sheet
surfaced with mineral granules with factory
applied layer of TOPCOAT®EnergyCoteTM.
Fiberglass base sheet impregnated and
coated on both sides with asphalt. Surfaced
on the bottom side with mineral granules
embedded in asphaltic coating with factory
perforations.
Asphalt coated glass fiber mat flashing sheet
available in three sizes.
Fiberglass base sheet impregnated and
coated on both sides with asphalt. Surfaced
on the bottom side with mineral granules
embedded in asphaltic coating.
Non -Woven Polyester mat coated with
polymer- modified asphalt and smooth
surfaced.
Non -Woven Polyester mat coated with
polymer modified asphalt and surfaced with
mineral granules.
Non -Woven Polyester mat coated with fire
retardant polymer modified asphalt and
surfaced with mineral granules.
Non -Woven Polyester mat coated with .
polymer modified asphalt and surfaced with
mineral granules.
Non -Woven Polyester mat coated with fire
retardant polymer modified asphalt and
surfaced with mineral granules.
Non -Woven Polyester mat coated with
polymer- modified asphalt and smooth
surfaced.
Premium glass fiber reinforced SBS
modified base sheet
NOA No.: 07- 1219.09
Expiration Date: 11/04/13
Approval Date: 03/20/08
Page 3 of 19
Product
RUBEROID® 20
RUBEROID® Mop
Granule
RUBERde Mop Plus
(Granule)
RUBEROID® MOP
Smooth
RUBEROID® MOP
170FR
RUBEROID® MOP FR
RUBEROID® TORCH
Smooth
. RUBEROID® TORCH
Granule
RUBEROID® TORCH
PLUS (Granule)
RUBEROID® TORCH
FR
RUBEROID ®170FR
TORCH
RUBEROID® 30
RUBEROID® 30 FR
RUBEROID®
ULTRACLAD®
RUBEROID® Dual FR
Vent Stacks (metal and
plastic)
Dimensions
3937" (1 meter)
wide
3937" (1 inter)
wide •
39.37" (1 meter)
wide
3937" (1 meter)
wide
3937" (1 meter)
wide
39.37' (1 meter)
wide
3937" (1 meter)
wide
3937" (1 meter)
wide
3937" (1 meter)
wide
39.37" (1 meter)
wide
39.37" (1 meter)
Wide
39.37" (1 meter)
wide
39.37" (1 meter)
wide
3937" (1 meter)
wide
3937" (1 meter)
Wide
Test
$necification
ASTMD6163
ASTM D 5147
ASTM D 6222
ASTM D 5147
ASTM D 6222
ASTM D 5147
ASTM D 6164
ASTM D 5147
ASTMD6164
ASTM D 5147
ASTM D 6164
ASTM D 5147
ASTM D5147
ASTM D 5147
.AST/v1 D 6222
ASTM D 5147
ASTM D 6222
ASTM D 5147
ASTM D 6222
ASTM D 5147
ASTMD 6163
ASTMD5147
ASTM D 6163
ASTM D 5147
ASTM D 6298
ASTM D 5147
ASTM D 6164
ASTM D 5147
TAS 100(A)
ASTM D 1929
ASTM D 635 S
Product
Aescrintion,
SBS modified asphalt base sheet and
interply sheet reinforce with a glass fiber
mat.
Non -woven polyester mat coated with
polymer modified asphalt and surfaced with
mineral granules.
Non -woven polyester mat coated with
polymer modified asphalt and surfaced with
mineral granules.
Non -woven polyester mat coated with
polymer- modified asphalt and smooth
surfaced.
Non -Woven polyester mat coated with fire
retardant polymer modified asphalt and
surfaced with mineral granules.
Non -Woven polyester mat coated with fire
retardant polymer modified asphalt and
surfaced with mineral granules.
Heavy duty, polyester reinforced, asphalt
modified bitumen membrane, smooth
surface.
Asphalt impregnated, coated felt, surfaced
with mineral granule.
Heavy duty, polyester reinforced, asphalt
modified bitumen membrane, granule
surface.
Heavy duty, polyester reinforced, coated
with fire retardant asphalt modified bitumen
membrane, granule surface.
Heavy duty, polyester reinforced, coated
with fire retardant asphalt modified bitumen
membrane, granule surface.
Non -woven fiberglass mat coated with
polymer modified asphalt and surfaced with
mineral granules.
Non -woven fiberglass mat coated with fire
retardant polymer modified asphalt and
surfaced with mineral granules.
Woven fiberglass mat coated with Polymer
modified asphalt and surfaced with
aluminum, copper or stainless steel foil.
Non -woven polyester and fiberglass mat
coated with file retardant, polymer modified
asphalt and surfaced with mineral granules.
One way valve vent used to relieve built-up
pressure within the roof system. GAF Vent
tacks are available in metal or plastic.
NOA No.: 07- 1219.09
Expiration Date: 11/04/13
Approval Date: 03/20/08
Page 4 of 19
P uet
Leak Buster"' Mat/ixTM
302 Non Fibered
Aluminum Roof Coating
GAF Built -Up Roofmg
Asphalt
RUBEROID° MOD
Asphalt, Asphalt L &
Asphalt P
Leak BusterTM MatrixTM
602
Leak Buster"' jxTM
715
LeakBusterTM Matrix"'
531 WeatherCoteTM
SeamCoteTM
Fire•OutTm
VersaShield°
VersaShield° FB-1S
VersaShield° FB-2S
TOPCOAT° FireShield°
MB
Leak Buster"' MatrixTM
201 SBS Flashing
Cement
Leak Buster"( Matrix"'
102 SBS Adhesive
Leak Buster"( Matrix"'
202. SBS Flashing
Cement
Leak BusterTM Matr'ixTM
203 Plastic Roof Cement
Leak BusterTM MatrixTM
103 Cold Process
Adhesive
Dimensions
5 gallons
100 lb. cartons,
bulk
60 Ib. kegs
5 gallons
5 gallons
2 gallons
2, 5 gallons
5, 55 gallons
350 sq ft. roll
350 sq ft. roll
350 sq ft. roll
5, 55 gallons
5 gallons
5 gallons
•
5 gallons
5 gallons
5 gallons
Test
Specification
Product
Description
ASTM D2824, Non-fibered aluminum pigmented, asphalt
Type 1 roof coating
ASTM D312, Interply mopping and surfacing asphalt.
Types I,11,111
and IV
proprietary
ASTM D -412
ASTM D -21 -96
ASTM D1475
ASTM E-1644
ASTM D3019
ASTM D3019
ASTM D4586
ASTM D4586
ASTM D3019
SEBS modified asphalt.
Surface coating for smooth surfaced and
mineral surfaced roofs.
Surface coating for smooth surfaced and
mineral surfaced roofs.
Surface coating for smooth surfaced and
mineral surfaced roofs.
Elastomeric roofing membrane. .
Low VOC, fire barrier coating.
Non - Asphaltic Fiberglass Based
Underlayment.
Non - Asphaltic Fiberglass -Based
Underlayment.
Non- Asphaltiq Fiberglass -Based
Underlayment.
Elastomeric roofing membrane
Cold Applied Modified SEBS Asphalt
Adhesive — Flashing Grade.
Cold Applied Modified SEBS Asphalt
Adhesive.
Cold Applied Modified SEBS Asphalt
Adhesive — Flashing Grade.
Standard Plastic Asphalt Roofing Cement
Cold Applied Asphalt Adhesive.
NOA No.: 07- 1219.09
Expiration Date: 11/04/13
Approval Date: 03120/08
Page 5 of 19
Product
Leak BusterTM MatrIXTM
303 Fibered Aluminum
Roof Coating
Leak BusterTM MatrixTM
304 Non Fibered
Aluminum Roof Coating
Dimensions
5 gallons
5 gallons
APPROVED INSULATIONS:
Product Name
EnergyGuardTM RA, RN
Composite A & N
EnergyGuardTM Fiberboard
EnergyGuardTM Permaiite
EnergyGuardTM GAFCANTTM
EnergyGuardTM Permalite Recover
Board
EnergyGuardrM Tapered Edge Strip
EnergyGuardTM Perlite
EnergyGuardTM High Density
Fiberboard
EnergyGuardTM Composite
EnergyGuardTM Composite RA
Wood Fiber
High Density Wood Fiberboard
Perlite Insulation
Dens Deck Dens Deck® Prime,
Dens Deckie Dura Guarem
Structodek
SecurockTM
APPROVED
Test
Spedlcation
Product
Descrintion
ASTM D 2824 Fibered aluminum coating.
ASTM D2824, Non- fibered aluminum pigmented, asphalt
Type I roof coating.
Table 2
Product Description:
Polyisocyanurate foam insulation
Polyisocyanurate foam insulation with
high density fiberboard or Permalite
perlite insulation.
Fiberboard insulation.
Perlite insulation board.
Cut perlite board
Perlite recover board
Tapered perlite board
Perlite insulation board
High density wood fiberboard insulation.
Polyisocyanurate/wood fiberboard
composite
Polyisocyanuratelwood fiberboard
composite
Wood fiber insulation board
Wood fiber insulation. board
Perlite insulation board
Water resistant gypsum board
Wood fiber insulation board
Fiber reinforced roof board
Manufacturer
(With Current NOA)
BMCA '
GAF Materials Corp.
GAF Materials Corp.
GAF Materials Corp.
GAF Materials Corp.
GAF Materials Corp.
GAF Materials Corp.
GAF Materials Corp.
GAF Materials Corp.
BMCA
BMCA
generic
generic
generic
G-P Gypsum Corp
Knight Celotex
USG Corporation
NOA No.: 07-1219.09
Expiration Date: 11/04/13
Approval Date: 03/20/08
Page 6 of 19
APPROVED FASTENERS:
Fastener
Number
1.
2.
3.
4.
5.
Product
•Name
Dri1i -TecrA #12 Standard,
#14 and #15 extra Heavy
Duty Fastener , Heavy
Duty Roofing Fastener
Drill -TeeTM ASAP
Drill -TecTM #12 or #14
Standard screws with
AccuTrac Plate
Drill -TecTM Galvaiume
Plates
Drill-Teem
Polypropylene Plates
6. Drill -Teem AccuTrac
Plate
EVIDENCE SUBMFrx D:
Test Agency
Factory Mutual Research Corp.
PRI Asphalt Technologies, Inc.
1RTofS.Fl.
TABLE 3 "
Product
Description
Insulation fastener and
Base Play fastener for
steel, wood & concrete
decks.
Pre -assembled Drill-
Teem Fasteners and
metal and plastic plates.
Base sheet fastening
assembly.
Round Galvalume stress
plates.
Round polypropylene
stress plates.
Square Galvalume®
coated steel plate.
Test Identifier
J.I.2B8A4.AM
J.I.3B9Q1:AM
J.I.ODOA8.AM.
J.I.ODIA8.AM
J.I.OY9Q5.AM
3029832
GAF -012 -02-02
GAF - 020 -02 -01
02-005
02-014
Dimensions
Various
Manufacturer
(With Current NOA)
GAF Materials Corp.
Various GAF Materials Corp.
Various GAF Materials Corp.
3" and 3 W GAF Materials Corp.
3" and 3 %' GAF Materials Corp.
3" Square GAF Materials Corp.
Description Re&
4470 07.02.97
4470 01.08.98
4470 07.09.99
4470 - TAS 114 07.29.94
4470 -TAS 114 04.01.98
4470 - TAS 114 05.11.07
Physical Properties 11.06.01
ASTM D 4977 02.01.02
TAS 114 01.18.02
TAS 114 03.22.02
NOA No.: 07- 1219.09
Expiration Date: 11/04/13
Approval Date: 03 /20/08
Page 7of 19
Deck Type 1:
Deck Description:
System Type lE:
Wood, Non - insulated
19/32" or greater plywood or wood`plank decks
Base sheet mechanically fastened.
All General and System Limitations shall apply.
Fire Barrier:
(optional)
FireOutm Fire Barrier Coating, VersaShield ®Non Asphaltic Fiberglass Based
Underlayment or SecurockTM.
Base sheet: GAFGLAS® #80 ULTIMATM Base Sheet, STRATAVENT EliminatorTM
Nailable, RUBERO1D® Modified Base Sheet, RUBEROID® 20, RUBEROID®
Heat- WekdTM Smooth or RUBEROID® Heat We1dTM 25 base sheet mechanically
fastened to deck as described below;
Fastening Options: GAFGLAS® Ply 4, GAFGLAS® Flex P1yTM 6, OAFGLAS® #75 Base Sheet or
any of above Base sheets attached to deck with approved annular ring shank
nails and tin caps at a fastener spacing of 9" o.c. at the lap staggered and in two
rows 12" o.c. in the field.
(Maximum Design Pressure —45 psf, See General Limitation #0
GAFGLASO Ply 4, GAFGLAS®•Flex PIyTM d, GAFGLAS® #75 Base Sheet or
any of above Base sheets attached to deck with Drill -TecTM #12 standard, #14
or # 15 Screws and 3" Drill -TecTM steel plate or Drill -TecTM AccuTrac Plates,
12" o.c. in 3 rows. One row is in the 2" side lap. The other rows are equally
spaced approximately 12" o.c. in the field of the sheet.
(Maximum Design Pressure —4Spsf See General Limitation #0
GAFGLAS® Flex PlyTM 6, GAFGLAS® #75 Base Sheet or any of above Base
sheets attached to deck with approved annular ring shank nails and tin caps at a
fastener spacing of 9" o.c. at the 4" lap staggered and in two rows 9" o.c. in the
field
(Maximum Design Pressure 52,5 psj; See General Limitation #7)
GAFGLAS® #80ULTIMATM, RUBEROID® 20, RUBEROID®Mop Smooth,
base sheet attached to deck with approved 1W' annular ring shank nails and
inverted 3" steel plate at a fastener spacing of 9" 0.0. at the 4" lap and in two
rows staggered with a fastener spacing of 9" 0.0. in the center of the membrane.
(Maximum Design Pressure —60 psf, See General Limitation #7)
GAFGLAS® #75 Base Sheet or any of above Base sheets attached to deck with
Drill -TecTM #12 standard, #14 or # 15 Screws and 3" Drill -TecTM steel plate or
Drill -TecTM AccuTrac Plates, 12" o.c. in 4 rows. One row is in the 2" side lap.
The other rows are equally spaced approximately 9" o.c. in the field of the sheet.
(Maximum Design Pressure —60psf See General Liinittatkon #0
Any of above Base sheets attached to deck approved annular ring shank nails
and:3" inverted Drill-TecTM insulation plates at a fastener spacing of 9" o.c. at
the 4" lap staggered in two rows 9" in the field.
(Maximum Design Pressure —60 psf, See General Limitation #0
NOA No.: 07- 1219.09
Expiration Date: 11/04/13
Approval Date: 03/20/08
Page 17 of 19
GAFGLAS° #75 Base Sheet or any of above Base sheets attached to deck with
Drill -TecTM #12 standard, #14 or # 15 Screws and 3" Drill -TecTM steel plate or
Drill -TecTM AccuTrac Plates, 8" o.c. in 4 rows. One row is in the 2" side lap.
The other rows are equally spaced approximately 9" o.c. in the field of the sheet.
(Maximum Design Pressure- 75psf, See General Limitation #7)
Ply Sheet One or more plies of GAFGLASe PLY 4, #80 ULTIMA, RUBEROID' MOP
Smooth or RUBEROID® 20 adhered in a full mopping of approved asphalt
applied within the EVT range and at a rate of 20-40 lbs./sq.
Cap Sheet (Optional) One ply of GAFGLAS® Mineral Surfaced Cap Sheet or
GAFGLAS ®Ener TM
gyCap Mineral Surfaced Cap Sheet adhered in a full
mopping of approved asphalt applied within the EVT range and at a rate
of 20-40 lbs./sq.
Surfacing: (Optional, required if RUBEROID® MOP Smooth or RUBEROID® 20 is top
membrane) Install one of the following:
1. Gravel or slag applied at 400 lbs./sq. and 300 lbs./sq. respectively in
a flood coat of approved asphalt at 60 lbs./sq. or applied in a flood
coat of Leak BusterTM MatrixTM 103 Cold Process Adhesive applied
at a rate of 3 gal./sq.
2. GAFGLASe Mineral Surfaced Cap Sheet, GAFGLAS. Energy Cap
Mineral Surfaced Capsheet adhered in a full mopping of approved
asphalt applied within the EVT range and at a rate of 20-40 lbsfsq.
3. Leak BusterTM MatrixTM 303 Premium Fibered Aluminum Roof
Coating. at 1.5 gal./sq.
4. Leak BusterTM Ma rixTM 715 , Leak BusterTM MatrixTM 322,
TOPCOAT° MB +, TOPCOAT1e Fireshield Elastomeric Roof mg
Membrane, applied at 1 to 1.5 gal./sq.
5. Leak BusterrM MatrixTM 602 MB Xtra Elastomeric Roofing
Membrane, EnergyCote® roof coating applied at 1 to 1.5 gal./sq.
6. TOPCOAT° Surface Seal, TOPCOAT° Fireshielde SB Solvent
based Elastomeric Roofing Membrane applied at Ito 1.5 gal./sq
7. Advance Green Technologies Photovoltaic Laminate solar energy
collector auxiliary roof equipment installed in compliance with
manufacturer's specifications and applicable Building Codes.
Maximum Design
Pressure: See Fastening Above
NOA No.: 07- 1219.09
Expiration Date: 11/04/13
Approval Date: 03/20/08
Page 18 of 19
WooD DECK SYSTEM LIMITATIONS:
1 A slip sheet is required with Ply 4 and Flex FlyTM 6 when used as a mechanically fastened base or anchor
sheet.
2. Minimum 1/" Dens DeckTM or 1 /z" Type X gypsum board is acceptable to be installed directly over the
wood deck.
GENERAL LIMITATIONS:
1. Fire classification is not part of this acceptance, refer to a current Approved Roofing Materials Directory
for fire ratings of this product.
2. Insulation may be installed in multiple layers. The first layer shall be attached in compliance with
Product Control Approval guidelines. All other layers shall be adhered in a full mopping of approved
asphalt applied within the Egli' range and at a rate of 20-40 lbsfsq., or mechanically attached using the
fastening pattern of the top layer
3. All standard panel sizes are acceptable for mechanical attachment When applied in approved asphalt,
panel size shall be 4' x 4' maximpm.
4. An overlay and/or recovery board insulation panel is required on all applications over closed cell foam
insulations when the base sheet is fully mopped. If no recovery board is used the base sheet shall be
applied using spot mopping with approved asphalt, 12" diameter circles, 24" o.c.; or strip mopped 8"
ribbons in three rows, one at each sidelap and one down the center of the sheet allowing a continuous
area of ventilation. Encircling of the strips is not acceptable. A 6" break shall be placed every 12' in
each ribbon to allow cross ventilation. Asphalt application of either system shall be at a minimum rate of
12lbs./sq. Note: Spot attached systems shall be limited to a maximum design pressure of -45 ps£
5. Fastener spacing for insulation attachment is based on a Minimum Characteristic Force (F') value of 275
lbf., as tested in compliance with Testing Application Standard TAS 105. If the fastener value, as field-
tested, are below 275 lbf. insulation attachment shall not be acceptable.
6. Fastener spacing for mechanical attachment of anchor/base sheet or membrane attachment is based on a
minimum fastener resistance value in conjunction with the maximum design value listed within a specific
system. Should the fastener resistance be less than that required, as determined by the Building Official,
a revised fastener spacing, prepared, signed and sealed by a Florida Registered Engineer, Architect, or
Registered Roof Consultant may be submitted. Said revised fastener spacing shall utilize the withdrawal
resistance value taken from Testing Application Standards TAS 105 and calculations in compliance with
Roofing Application Standard RAS 117.
7. Perimeter and corner areas shall comply with the enhanced uplift pressure requirements of these areas.
Fastener densities shall be increased for both insulation and base sheet as calculated in compliance with
Roofing Application Standard RAS 117. Calculations prepared, signed and sealed by a Florida registered
Professional Engineer, Registered Architect, or Registered Roof Consultant (When this )limitation is
specifically referred within this NOA, General Limitation #9 wil not be applicable.)
8. All attachment and sizing of perimeter milers, metal profile, and/or flashing termination designs shall
conform with Roofing Application Standard RAS 111 and applicable wind load requirements.
9. The maximum designed pressure limitation listed shall be applicable to all roof pressure zones (i.e. field,
perimeters, and corners). Neither rational analysis, nor extrapolation shall be permitted for enhanced
fastening at enhanced pressure zones (i.e. perimeters, extended corners and corners). (When this
limitation is specifically referred within this NOA, General Limitation #7 will not be applicable.)
10.. All products listed herein shall have a quality assurance audit in accordance with the Florida Building
Code and Rule 93-72 of the Florida .Administrative Code.
E OF TATS ACCEPTANCE
NOA No.: 07- 1219.09
Expiration Date: 11/04/13
Approval Date: 03f20/08
Page 19 of 19
992
03/23/2005 14:ZZ
3E157D1 5579
7
RPM f : r? TEALS A
ROOF COVERING MATERIALS (TIM)
Roofing Systems (TGFU)— Confintied
Base Coat: "A-38 Series ", 0.75 gal /sq.
Second lease Coat "A -38 amiss ". 0.75 gal /sq.
Wear Coat " A-38 Searles ", 0.75 gal /sq plus walnut shells at 0.75 lbw per
Surfacing: " A -58 Series ", 0.75 gal /sq plus walnut shells at 0.751bs per
sq.
46 Deck: NC Iaw1 Orte 3/4
Foam: Spray application of 2 -iii thick "Poiyfoam 273" (2.7 lb/ft?
Smfad ng Spray application of 28 to 34 -mils '11473Q" (aluminum)
47 Deck: NC I'ncTine 1 /2
Insulation: Spray application of 2 -in. thick l'nlyfoam 273" (2.7 kb /ft.?
Surfacing: Spray application of 28 to 34 -nails "CT 876;2 ". (ivory)
GAP MATERIALS CORP R13
8361 ALPS MI WAYNE N] 07470
"Ruberoid 20" or "Ruberoid Modified Base Sheet" may be t�tilized as an
alternate to Type G2 base sheet: in any of the following Classifieationns..�rs
1/2 in. thick (min) gypsum board or •1/4 in. thick (min} G-F Gypsum
Densl?ecleS may be used m an existing noncombustible deck on,
when this is done, the resulting roofing ystem is acceptable for use over
combustible (15/32 in. min) •roof decks. The joints in the gypsum board and
• overiaymettt board are offset h in. with the joints in the dec If polystyrene
part of the roof system, it rnus� laced below the overlat'm adhered to C-P
Also, multiple plies of GA Ply 4' or Ply 6" may b�
Gypsum DensDeekg in hot asphalt.
emGuard Ultra" is an acceptable alternate to "FnergyGtmrd" in arty.
applicable Classification.
ADO MIAMI
SYSTEMS DIRECTORY
ROOF COVVRING MATERIALS (TEVT)
Roofing Systems (TGaPU)— Co:afinued
"GA9 -TRMP Permalite Recover Board" may be used in lieu of any pariite
insulation in any of the following NC Cl tsifications.
Unless otherwise indicated, any of the "Asphalt Felt Systems with Hat
Roofing Aspirear m.ny be 'surfaced with `Pireshield MB" at 2,5 " 3,0 g<+.1 /sq.
Cass A, B and C
Hot roofing asphalt, for use with organic are glass felts or modified bitumen
membranes.
"Ruberoid Heat Weld" 555 rtxrling membrane may be wed in lieu of
"Ruberoid Mop" SB5 product • in any applicable Classification.
Class A
1. Pecks C -15/32 Inclines 3
tnmlaaion (Optional)! One or more layers perlite, wood fiber, glen:
fiber, isoiyanurate, urethane, perlite /isocyanurate composite, perlite/
urethane composite, wood fiber /isoeyanurate composite, phenolic, any
thidcrtess.
11y Sheet Thaw or more la L 1 - •• = ^ y or
5erfa:iap Gravel.
'Deck: C -15/32 Incliner 2 -
, Insulation (Optional' One of more layers pelrilte, wand fiber, glass
fiber, isocyanurate. urethane, perlite /isacyanurate composite, perlite/
urethane composite, wood &ben /isoeyanurate composite, phenolic, any
thickness.
Ply Sheet Three or. more layers 'Pepe Gi • "GAFGLAS Ply 4" or
"GAFGLAS Ply 6 ",
Cap Sheet: One layer Type G33 "GAFGLAS Mineral Surfaced Cap
Sheet" or "EnergyCap Mineral Surfaced Cap Sheet".
Deck: NC
PAQE 04
GAP Stratavent Eliminator Venting Base Sheet (Nailable )" may be mechani-
cally attached or hot mopped over noncombustible decks and as a recover over
e:ds&t roofs�
LAS ? Insulation may be utilized as weaver board over " l vER-
GUARD" insulation in any of the following systems.
Unleaa otherwise indicated, the roof insulation is mechaa*ally fastened,
adhered with hot m ptai,ig asphalt or urethane insulation adhesive. Poty�ty
rene reference in any of the fa awing Cassficatc►ns include "EI�TEtiGuard EPS
Insulation "-
References to glass fiber insulation include "FnergyGuard Fiberglass Insu-
lation".
AST FELT SYSTEMS WFFH EMT ROOFING ASPHALT
G2 asphalt glass t base sheet ( "GAFGLAS #'75 Base Sheet" or
" ss
*BO ULTN A ") is a suitable alternate for Type G1 asphalt glass
fiber ply sheet ("GAFGLAS Ply 4" or "GAFGLAS I'ly 6" }in the Gass A, B or
C roof systems indicated below.
The roof deck may first be covered with a Type G2 asphalt glass mat base
sheet "GAP Stratavent Eliminator Venting Base Sheet (Perforated)' or "GAF
Stratavent Eliminator Venting Base Sheet (Mailable)" Perforated to be
mopped and mailable to be mechanically attached granule side down.
As an option tion T e G2 asphalt Hass mat base sheet ( "GAPGLAS #75 Base
Shy". "GP,APGLA •0801JLTiMA" car "GAF Stratavent Eliminator Venting Base
Sheet (Nailabie)" may be substituted for Gl asphalt gloss fiber ply sheet
( "GAFGLAS Ply 4" or "CAFGLAS Ply 6 ") as the nailed base ply in the
following systems.
Bottom ply nr base sheet may be solid mopped, spot mopped or imecltani-
tally fastened.
Unless otherwise indicated. all insulations may be hot mopped or mechani-
cal] fastened.
"GAFGLAS Plashing" or "Ruberoid" may be used for flashing in any of the
Class A, 13 or C systems listed below.
When "petite" is referenced, this includes "C =AFT MP PERMAL IT E®" or
an other UL Classified perlite insulation.
Crushed stone or :lag are suitably alternate for gravel in any of the Claeaa A,
B or C systems fisted,
Structural Ce=ment fiber building units are considered suitable to be included
as a deck in the following Class A, B or C systems 1istecl over C45/32 or NC.
The use of fo psum'board under any of the fallowing Class A. B or C systems
does not adversely effect the rating. The use of 1/2 in. min gypsum board is an
acceptable alternate ttr imitation over C -15/32 decks.
The use of polystyrene tnssulation board between miss 3/4 tn. pulite board
and deck with rosin paper (perlite/rosin paper/polystyrene/perlite) is a
suitable alternate for .paper baud in the fallowing Cass A. 8 ar C
systems. .L1i =rd RA" slue "BMCA
T3MCA linerg�y}Guard RA ", "BMCA Tapered EnergyC
EnerpyGuard 1iN' may be substituted for any Atlas po)yisocyanurate insula-
tion m any of the following Classifications.
trembaall "Plane Mop" may be utilized with any taf the following "Asphalt
Felt System. wish )'lte Roofng Asphalt".
('A LAS Mu Premium Base Sheet may be used in any of the following
systems.
GAT -GLAS Ilex Ply 6" is n suitable alternate to "GAFC'iLAS Ply s".
LOOK FO2 ThE
one
)r One or more layers perlite, wood £Lbw,
fiber, isocya iu ate, urethane, pertite /isotyanurate composite, per rite/
urethane composite, wood filter /isocyamirate composite, phenolic, 2 in.
Ply Sheet Two or more layers Type G1 "GAPGLA.S Ply 4" or "GAF-
GLAS Ply 6 ".
Cap Sheet One layer Type G3 "GAFGLAS Mineral Surfaced Cap
Sheet" or "- nerf,yCap Mineral Surfaced Cap Sheet ".
4. Cede NC Incline! 1/2
llosealation: One or two layers "Isotherm W', 4 in. max, hot mopped
Ply Sheet; Any ULCassif.e d gravel surfaced Class A asphalt glass fiber
mat system.
5. Declo C -35/32 Indium '1
Slip $heet•(Optionalk Red rosin paper, nailed to decal.
Bass SheetQQ ti layer Type G2 "GAFGLAS 075 Base Sheet" (play be
nailed).
Ply Sheet: One or more layers Type G1 "GAFGLAS Ply 4" or GAFGLAS
Czp Sheet One Layer Type G3 GAFGLAS Mineral Surfaced Cap
' Sheet" or "EnergyCap Mineral Surfaced Cap Sheet ".
Deck: NC Incline 3
Base Sheet One layer T G2 "GAFGLAS 075 Base Sheet ".
"
Ply Sheet One or more layers Type G1 "GAFGLAS Ply 4 or "GAI-
GLAS Ply 6 ".
Cap Sheet One layer Type G3 GAFGLAS Mineral Surfaced Cap
Sheet" ar "EatergjC.ap Mineral Surfaced Cap Sheet ",
7. Deck: C -15/31 Incline 2
Iesulatiamu One or more layers perlite, glass fiber, isocyenurate. ure:":
thane, perlite /iseseanurge composite, petitte /urethane composite, phe-
nolic. 1.0 in. min (Offset from plywood joints 6 in.).
Base Sheet One or nave layers type Gi. G2 or G3.
Membrane One or more layers "Rubernid Torch" (Smooth in Granule).
"Ruberoid Torch Plus" (granule), "ltubemid Mop" (Smooth or Granule)
or "Ruberoid Map Plus" le).
Cap Sheet: Type G3 GAFGLAS Mineral Surfaced Co l* Sheet' or
" ner y .ip Mineral Surfaced Cap Sheet ", hot mopped. •
S. Deck: C-15/32 Incline 2
3nrvilitton (Optional' Ono or more layers petite, wood fibs: glass
fiber, isocyanurate, urethane, pe'lite /isoryanurah• composite, per ite/
urethane ceomposite, wood fiber/isaeyanurate composite, phenolic, any
thickness.
Base Sheet Two or more layers: Type G2 ce G3.
Ply Sheet (Optlonallt One or mere layers Type G1
Membrane: One car more layers "Tuber idt Torch" (5motnh nr Granule>,
"Rubermd Ttureh Plus" (granule), 'Rukaerosd Mop" (Smooth or Granule)
or "Ruberoid Mop Plus" (granule).
K ON PRODUCT
1