MC-05-72Mechanical Permit
Miami Shores Village
10050 NE 2nd Avenue
Phone: 305 - 795 -2204 Permit Number: MC2005 -72
Printed: 5/31/2005
Applicant: VILLAGE DEL MAR
Owner: DEL MAR VILLAGE
JOB ADDRESS: 1200 ST NE 105
Contractor MULLER FIRE PROT. INC
Local Phone: 305 - 636 -9780
Parcel # 1122320270110
Legal Description:
Signed: (INSPECTOR)
Contractor's Address: 3200 NW 38 ST
Page 1 of 1
Fees: Description Amount
FEE2005 -6877 Building Fee $960.00
FEE2005 -6878 CCF $19.20
FEE2005 -6879 Training and Education Fee $6.40
FEE2005 -6880 Technology Fee $24.00
FEE2005 -6881 Scanning Fee $12.00
Total Fees: $1,021.60
Total Fees11,021.60
Total Receipts: $0.00
Permit Status: APPROVED Permit Expiration: 11/20/2005 Construction Value: $32,000.00
Work: FIRE SPRINKLER SYSTEM
In consideration of the issuance to me of this permit, I agree to perform the work covered hereunder in compliance with all ordinances and regulations pertaining thereto and in strict
conformity with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village. In accepting this permit I assume responisibility for all work
done by either myself, my agent, servants or employes.
Signed: (Contractor or Builder) BY:
MIAMI SHORES VILLAGE
BUILDING DEPARTMENT
305- 795 -2204
Building Inspection Request
Date 4 00105
Type Insp'n tP tI Skritit iv+U 134 fitv
Permit No NL WO5
Name \I 114 64.,L 14.
Address 17.
Company
Phone #
Inspection Date
Approved
Correction
Re- Insp'n Fee
4a3 41 ist,
MIAMI SHORES VILLAGE
BUILDING DEPARTMENT
305 - 795 -2204
Building Inspection Request
Date '11 O5
Type Insp'n dQ, lti1tel itu 2.4 I 3yi Vow
Permit No. i `Z
Name V %(j, )1
Address 1200 1•11-. \ OS ST
Company
Phone # r an I ( C Rt0 WAS •
Inspection Date \01 105
Approved ❑
Correction ❑
Re- Insp'n Fee ❑
Approved
Re-Insp'n Fee
,5
.--- - % MIAMI SHORES VILLAGE '
BUILDING DEPARTMENT
305-795-2204
Building Inspection Request
!,
Date C6 I ail 05
.., Type Insp'n FA Y,Ilv 4,,txrI 2.4 i 3vO FIN/
Permit No. h‘C- 1 005 - 1. 12-
,- Name \I Ilkk(t c)4, 14.
Address 12-00 NE N(. ST
Company
Phone # 1 (9 SO ONIAS
-- Inspection Date ek1p 1 lo 5
ri
Correction
Miami Shores Village
Building Department
10050 N.E.2nd Avenue, Miami Shores, Florida 33138
Tel: (305) 7952204 Fax: (305) 756.8972
BUILDING 2ECETWED Permit No. () COS — 7 2
PERMIT APPLICATION MAY 2 5 m5 M ster Permit No. 8P03 -/ r'/
FBC2001 -
Permit Type (circle): Building Electrical Plumbing ( Mechanical Roofing
Owner's Name (Fee Simple Titleholder) Phone # ....-
Owner's Address
City State a Zip
Tenant/Lessee Name Phone #
Job Address (where the work is being done) ,/ 2.0 /V U> M 5
City Miami Shores Village County Miami -Dade
Is Building Historically Designated YES NO
Contractor's Company Name Mu //e 1?/' W2 ld'lli . Phone # _3 OS —' 43 4 970'0
Contractor's Address 3 - 2- G✓ 3 I s
City / /,,„.,.. /9 ' 7 ' 471 � State FL . Zip 3 3 /
Qualifier /C ®a e e,...) air-e- l't/
State Certificate or Registration No. S /Z 6 /Od U Certificate of Competency No. Lcl Z-6 / e 0 c
Architect/Engineer's Name (if applicable) Phone #
$ Value of Work For this Perini
❑Alteration c8,11
Type of Work: ['Addition �^
Describe Work: /L+� �,P//ZO/�i/,(C� � ‘7
Submittal Fee $ Permit Fee $
Notary $
Total Fee Now Due $
(Continued on opposite side)
Training/Education Fee $
Zip
Square Footage Of Work:
❑ Repair/Replace ❑ Demolition
, 6 0 CCF $ "1 .ao CO /CC
•Lk (... Technology Fee $ 24 Lb
Scanning $ Radon $ Zoning Bond $
Code Enforcement $ Structural Plan Review. $
Bonding Company's Name (if applicable)
Bonding Company's Address
City State Zip
Mortgage Lender's Name (if applicable)
Mortgage Lender's Address
City State Zip
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING, SIGNS,
WELLS, POOLS, FURNACES, BOILERS, HEATERS, TANKS and AIR CONDITIONERS, ETC
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all .
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR
PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING,
CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF
COMMENCEMENT."
Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subject to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site
for the first inspection which occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the
inspection will not be approved and a reinspection fee will be charged.
Signature Signatur
( - -Owner or Agyt
The foregoing instrument was acknowledged before me this The foregoing instrument was acknowledged before me this
day of , 20 _ , by , day of 20W by p(1 11 c 1 o\
who is personally known to me or who has produced who ' sonally own to me or who has produced W
chc 05/13/03
As identification and who did take an oath.
NOTARY PUBLIC: NOTARY PUBLIC:
Sign: Sign:
Print: Print:
•: �� ondedThn
My Commission Expires: _ _ __ My Commiss •n ET es;.o oFF` =ticRondmR - ��.., a.;.
as i •,Ti ation and who did take an oath.
*********************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** * * * * * * * * * * * ** * **�* * *�* * * * ** * ** * * * * * * * * * * * * * * * * * **
APPLICATION APPROVED BY: ei�J Plans Examiner
Engineer
Zoning
HYDRAULIC DATA: SH EET •
•
• • •
•• .. • • • ••• • .
DESIGN: MULLER FIRE PROTECTION INC
LOCATION: 3200 N.W. 38 STREET
MIAMI, FLORIDA 33142
PROJECT:
AREA:
DESIGN:
HOSE ALLOWANCE:
CONSTRUCTION:
C- FACTOR:
• •
VILLAGE DEL MAR
SE CORNER OF 105 ST. AND BISCAYNE BLVD.
MIAMI SHORES, FLORIDA
GROUND FLOOR PARKING - AREA 1
N.F.P.A. 13
INSIDE: 50 GPM
OUTSIDE: 200 GPM
DATE: MARCH 11, 2005
. .
CONCRETE SLAB WITH CONCRETE BLOCK
EXTERIOR AND INTERIOR MAIN DIVIDING WALLS.
INTERIOR PARTITIONS TO BE METAL STUD AND
DRYWALL WITH DRYWALL CEILINGS
SYSTEM TYPE: WET
SPRINKLER TYPE: TYCO EC -11 BRASS UPRIGHT EXTENDED
COVERAGE 3 NPT 155 DEG K =11.2
TYCO EC -11 BRASS SIDEWALL EXTENDED
COVERAGE 3 / NPT 155 DEG K =11.2
INSIDE: C =120 STEEL
C =150 CPVC PLASTIC
UNDERGROUND: C =140 DUCTILE IRON
C =150 C -900 DR14 PLASTIC
FLOW 'PEST: 65 PSI STATIC 45 PSI RESIDUAL @ 1700 GPM FLOW
CALCULATION SUMMARY: 58.33 PSI @ 536.24 GPM CITY CONNECTION
FIRE PUMP: N/A
i
•
•
• •
L
••
..••
•
.
a
0 1 2
!1111■1i•USi1l0Rfasa
11111 OW R IINSIONINIONINIONIIIIIIM
11111I•e• SWOP MUM
ai -s
11111•11•.01101111•111■1
/1171 'WORMS --- OIaaOOa
I111111•• INNS • 0011-••- ala
1111711•• •000•011!a1a0011-
■11111/••1100si
■1111 ewes .1 01•/0001 aaala
0 ■ 11H 00••••••••• !.1
11111111•10•OOi■
I1I1i1tt•OOf%MINIUM aka
VIM 111111011•u0 - ass•O-
I1111/..R•0.1.0■aaaia
111111101$0 0- 11110aaaa00
• 11111 u•••A •••••• ••t•••1 ■
111l$IU ■U0000i01 - -SI I=
■11111
•••• 11001■ 0sa.aa0
nlnl.r•�a��ts���aatali
1/1111••4
• 1 1111111, Zia■ laiC)!< GasMI istr NOM i 'wMrM M � OM r = _MO � isMIMI
l 11111/ ll aaaala U = IS i WI MI s ow no if it ifMe MB rr rr rf�m=NMIMM/rssl�issl•��liM -�•�
• li i _ 0r10irr0MMOOOa0aOwrr riMINMOM rWM ir MON �� s00i11r
• iliiiiii iiiiitccmit�rrirsl�•��O101Es IMIam�_r1�r_i■�_i/MDWM M ��BMOM NI�MEMMEN MMEMN MINI MI NIMO �� �--!
IIIIIIiiii• ii ilNINIsasal�rrrrliram rrrr�a0 .O/Orra1•mosa10rlimassOrNEMMin MRS mil 00r NMI MINE ~ _ i
�1iOSw ■•== OM�MI �rrir�ll��rlrlswllr�� MIS =N MIN MIN SIM mow
r �r
.1r
t ill' 11tiO010it•2iTs��
111Ur•[a\O ^••I�C7" 17 a a as a rm�.o a10aa1 �i
stmarz.au4ca g T Y'1TS000■ INIMIo som rrililaH��lMENEMMIN a
n 1111►-1111[7ICapozTr1Sa�aa ilmmi �summowr/rr rrrr�i'Ms0rrss0riNM -mow- -� MINN UMW
nIV ..4C■0113 .1 ML A!7 IN���ralOMwrr rrMr�rrrsl���sss`r�� -NM��� MB MINI
I.. • ,1- 1;:s•COmentu.l:� WuMIWalrMUal !•wrrrrrrMIrrrr�•N�0Is0�s -� -r-
/ �• IIi••• ii=l MIMI �MIaM0�ar00ra0I�_a1r IMaINN 0«0MI �OMMOE∎000OS�O MINI IMO r��MUMMON
I1I1I WI NI MI OM
/1171 I1\■■M 1 � - � -_ - -i r
/• CCO■■. 1^ rl�w/ �1��if�■■ 1 �wrr� / r �� 11s �- 11w1�s■ ISrlll�r� ■r wrrr r■IS � 1 = s a...�r�ar�
- •.i�r,rlrsl��r�■ r���1�r11r�r111w10i
wift•
1111) ■mil d
0! as /al•aalfalr�alat is0�1�11 •wi1■1�ilrlsr NA a�1a1i
rs
r1
NOM
u1117 „ a• OOi�srimumiili��a1ImrO s mamga 1�0m••�
■111nw•c�i � rfa�� -�.... rrlrl���raa��0�s�
I in: 7; - ._';taM m7 P1a� rlo:7-Ps=Imm1 �wrt r MO r r r r ll r r�if•
/ uhEY7C 0∎ 1 IOirsElP OSo_ MI Ns a1i ....�-w■OMrsM■rMSNMMxrrrrrasMB ■r 001OS1r•r�i�� MIN RIM
IIII11■ ►1 ■3Q1kISU-- 'r"7Gr -1 0' "Ir-1. "►. rM�Ct • ". rr=rrrr•���a�r•ss���t��rarii
■1in■3.11 a11aP4.7s_l ►71��� NM rrrNM r•��ss sr'�r��iri i
11M8Va \•t it ■ /i4■OI1.r "aaOR�ssy r w rOr �!ialI. gi 11111 r0Mr r III= VIM um limo s NMI moll l• MIME MN MIN MIMIiVIM i i
IIIII1111IIW I11GJG a �1Y�L ] LrtSJ _ � _ r _ r _ r _ � _ rMaifr_r__rr•�i�s�� -- �rMNMN- MIN MINI i � I � a � IMO OEM MIN
i Iiiliii•L:�ii0 s S 00 . O. �a1a11f 0��a0a a100O0f1� 01!1<J� ~��lMIMI
i 1ita 11 a % \•1ii;1•f�si�WIN la r al l� MI r M_ NM r MI NM MI r r �`�__ s - �� 1 ` 1 �������� Milo
1111111■■ 011.` IfaiII S�ai r � rrr�irrrrrMs rl sMAs�s MIN ��r�i_ill�li�
I111111■■ 111�1Oissisi7 aA• rOS��r�r0rr00i OrrrONrEMMEN∎lir'"! MN MIN s��rr�ir NMI MIN MIS
r�
1 1tI111�CC: 11��Ss:: ::�CC• •O1 t>i��rrr� rrOli �i�s �i�rMI=IOWr
11111% 1% Y��11��i�sisai/ i/ 01��rrlrrrrr0 .Or rr � i■ OENis0Or Moil �0��
iI1111t•••mm1mmm•moOl mf•B•o II•1rr0lmlu l•irrrtriml___•rr_t■mli ail 1!_l_�_�_�__
I IIIIIII•••IIIr 0INIR01 /aaa a1 a1 r so MINI la ra101a �__00�rrr�00a 00. 0M as �� 0r ISM Mal � OrO>r.�i r0i ssl�
/III 1111111 0 1i01O�Qaiaa ∎1111 r�0ir0i 0s
/ Il 1111 ■■ � � � s.�... i ■r ■� Ii ■t, ■r ■i 11l■w 0111- r1■0111M 1r err MI 1wr■OMEMI IMO MINI MIN rM NMI llr MINI r MINI NMI NM: !NM lrNI MIN rl■■ MEI
a 111111■■ sum limm 0 / NM MIN 1O ri>_ Immo mom sl OS r 0i 0mmo an Now r mg 001 NM mot s sm r��r_ --`� i MIN
IIIIII1•1IIN�� ■01a113∎1110ar1a11IMM SMOama•s01rme SOSS��s- - '-- i0�ir�r IMMO MI NM MI
iii! 1 1111•: isINl; iNIslnrsrl- i■ S10 isO0ir 0s Ir�iirrsir •i'�NM�NM����irNM lwi NMI i MIS iMINI MIS
111 11111• ■■ . rra ■al ao�rrra. i�1�>is�l���= =�r
... �aara�I�al�ir rl� alr >r � �•1�r1s110irrw�r ■/r���� afi ��
i 0101 s i s � i A•OOOi1i � r 1/ MB 1a■ Mal UM MIN MIN aS 1.1a �r
/ 111110 .1.0OONINIaasa011a�1111.01aNEr0a IS MUM 1ai�r00a000i1�rrI1 ■lOMrrrrrrs�i'SI'== MOM = _���WM NONE MIN
1111111•••••10•1 0 0 101 ••••••= 1011101101001100000=1•001100 a�100•a�0r
s
• �M00aa10a11N11ara/0� aa a>>•10O.Oil- arEr�sla ��
11 III ■■■■ 0 01001 rr -O - MINIM 1r 0r r� �� ■ EMI 1r1 -
II111/1■ MMM0rrr0•a0M
111111/111•000i01�ssa !>�iliarsl•i
r./- MO MIr rrr i��� �r�� r_sur•ll11rr/�rs �•l rlllrr
•111111•••••000•1 1 0 1010011030110 • 0 • 110M100 -- 0•••••1=1•0 Mil MO Oa MO MI
IIIIiI1•• 0000 �O0101assMOs- r0r0- Mr1Mr1ii0100011r■rrrrrUOal•000i MN s ��1i11 ---
11i11 ■0.11000 01 <t� MOM sat•a ■a10O�!•M�0a 001 i0arr� 00r0101rr0a1�00s0r aa r0rr� �10r �ra1r1� MINE ri
1 181111 00 0* S IMM OsiirMI NEM OS IIIIMUMMMOM r EMIMNa1 •rrMIIIIIrsi000i0■INrsM■rOOiMIMIrBMri --
II1111110000000 %0l∎•1•--w- rrr lrr0.OrrrMIIMMOMO 0i- OOiO00s�ili� = ■irININI -/rrt
IIll*111.000 000SisSSO. 0101■ i0i r•irr_�rrs*rrr- ��isssrWm A�r�� -mM
111111•• 10000NI il�iNI 00rrr= so r MI r rrMrr 0•�0rss/rO0SrOS0s
■11111.0.00000 ism aa0ra ma so at al 0O 0r ow 000 a1 r am r 000 r rraD at•mow 0r 0- 011 -it• 1r r1r0�•� _ _
111811.••1110 1O OM III AI l �1�0ONS Oa r 0a r 000 um a 1. 01r aural aa�aa a■11l Irk IMO 0aa aal�i --
OIIIIIII/ 01OOOii MIN 00i> r�0irr_ r_rr to00O00i1r rr_ r_r_m_0s'�rs_0r�_r_�r•rst��s_S�
i 1111 if II i s a am Oi a ammo mum al r m mum =I r r or 0001 r ENO Nun now Imo sum 00s mom or r1 00s ma mum mows Imo 011aMille IIIIIso!♦ Or r•qr
00.E a>• Emil a0• �0•� a>• 000A rf•.a0� 00r
III 111.• ill , 0 0- ally al.0 a, rs� SIMS MGM rr.r
•1111x••• 0101. 01x• sa t• li�i0as Ois■ OSOta> iOalalrrrl�rr rl0•s■ ��rlrmais
■1111 111■ 0aaaa•11a00la■ MOM NM 0000- MINI INN a0 r0r MIS alOraliimiaaOM simil •r ion rr OEM MINI SUM NMI MINN ~r - -
Itl11111 00000000 00 rllr li�rrrr rMI OBra� r r� r � 0!- lrsrr MOP NM MEM 611MI OEM IMO MOM !NM 000 IMO 21101•10•0101•0 MOM OEM MI= 1101011 MIMI MINI somon momm
1111 10000 010101 Now soso a1•erno m -• a0� lir� mow am saw Nl , ono am man wpm Mow moms =IN mum! r mot saw Mow r NMI =Ma
111111101 1■/0 ■ii.0MMWNMNO =MaiNOrr=MoeMI iri *rrriiMN swrssOr�OrOr��Ori0000iOr MEN
11111 1110.- O - al WO MB 0� MO MO Ma �_r -- 0a• O r: a001 ~ - -MIME •••••
MIN
Oi!
�1■■1
•
rIi
•
•
a
O
s
a
tv
A, % G.P.M. MULTIPLY SCALE BY j ' $} rws
7 d 9 10 . 11 12 /3
IIII MIMI= IIIIMen MIMMBMI srr INN MOM _ MOM __ MOM= MSS MN ___ - - --NM NM
• so am iam rrrrrram mil anron a 'rt iamas - -I � - ----
rr 0�0N- rrrrrrrr "OMM Msrlr•
000Ia1 •••a a/rtt *r MI r r• r MOM NM �sl� MOs �r��r ~ M I
0ia■1s000Ora10010ar00Mr ••irrr/r =�sr - + - �riri- O -- --- MIN - 0OM1iIrri'Mrl11M01O1rrr/0i s NNW
��r- - - .a, - al.r r aM 0011 - ma t - � IIIMM -_ U• 1 ••r• O r MIN MOB00 • 1l - NMI -- MINIS mom 1iaNm0O ----MI s' -rrrr Or00ir OM MINN=I 0 MI r MI NMI MIN 0∎••r - -00a r- rr -- r r 10•20•01/0 0aa 0�0�00000 MINN MINIM IINSII MINI MIN
OM as Mae Ns 0ONI a/00 001 -1-a0 a- 11rBala MI MIMI r r 0001--- r1 0000I - -r- MME MININ NMI
NEr NM OM MOr - =0 =1r!
MOMS= IM ■ rlrlswsssstr•rr
a l. - — — a■ 1111 a1 r r a0 MB a* MD I••• IMO a,• ••aaa•0a a01 a as - - 0r -- - r aal MOM •1010 - -00 - 0 MIMI MN NMI 1111•1111•11 VMS MINI OM MIMI
0010�O�OOrr�� -�r rrsa�rsrsrlr MINI EMI - MOM rMIMI Minn UMW
•• IrIn1• o• sin ■ ir•■ ■my1/1r11MI1111rr Ilia r>, --- • E M■ r. -.� . - �0• i• •�� . EMI s s � 0111•0 1�.�
rl .... 1N MUM MOM �1r
14
N 1.85
M 5
* ** FIRENET * **
HYDRAULIC ANALYSIS OF A FIRE PROTECTION SPRINKM;$YS ;EM ; :„ : :
VERSION 2.2 — JANUARY 1992 • • • • • .. • • • • • • . •
• • ••. • . .
DATE FOR THIS COMPUTER RUN = 03 -11 -05 — TIME = 04:32:55
ID FOR THIS COMPUTER RUN = PARKING GARAGE REMOTE.AREA.1. .. .
• •• • . . . •
• • • •
INPUT DATA FILE NAME = A: \14UNTTPKG.DAT • •
..
• • • • • .•• .•
OUTPUT DATA FILE NAME = A: \14UNTPKG.OUT
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * ** * * **
* * * * * * * * * * * ** SPRINKLER SYSTEM DATA SUMMARY * * * * * * * * * * * * * * **
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
WATER SUPPLY CHARACTERISTICS:
STATIC PRESSURE = 65 PSI
RESIDUAL PRESSURE = 45 PSI
RESIDUAL FLOW = 1700 GPM
ELEVATION OF PRESSURE GAGE = 2 FT.
FLOW REQUIREMENTS:
OUTSIDE HOSE FLOW REQUIREMENT (AT SUPPLY) = 200 GPM
INSIDE HOSE FLOW REQUIREMENT (AT LOCATION 7 ) = 50 GPM
TOTAL SPRINKLER SYSTEM FLOW REQUIRED (BASE OF RISER) = 0 GPM
SPRINKLER INFORMATION:
MAXIMUM SPACING OF SPRINKLER HEADS = 14 FT.
MAXIMUM SPACING OF BRANCH LINES = 14 FT.
REQUIRED MINIMUM FLOW (PER SPRINKLER) = 30 GPM
REQUIRED MINIMUM FLOW DENSITY = .15 GPM /SQ. FT.
OTHER SPRINKLER SYSTEM DATA:
DEFAULT VALUE FOR C— FACTOR = 120
NUMBER OF BOOSTER PUMPS = 0
SUMMARY OF SPRINKLER OPERATION:
SPRINKLER CONSTANT = 11.2
LOCATION OF OPERATING SPRINKLERS:
118 119 120 121 122 123 124 125
• • . .• • • • • •.
. • . • • • • . • •
• • • • • • • • • •
• • • ••• • • •
• • • • • • • •
• • • • • • • ••
********************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
**************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
* * * * * * * * * * * * **
* * * * * * * * * * * * * **
PIPE DATA SUMMARY
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
NUMBER OF PIPES = 40
NUMBER OF JUNCTIONS = 37
3 5 4.070 150 110.0 31.7 0.0
5 6 4.260 120 4.0 10.0 4.0
6 7 4.260 120 4.0 10.0 0.0
7 8 4.260 120 10.0 10.0 9.0
8 9 4.260 120 2.0 0.0 1.0
9 10 4.260 120 3.0 10.0 0.0
10 11 4.260 120 17.7 0.0 15.7
11 12 4.260 120 16.7 0.0 14.7
8 100 2.635 120 4.5 19.0 0.0
100 101 2.635 120 20.0 0.0 0.0
101 102 2.635 120 19.0 12.0 0.0
102 103 2.635 120 20.0 0.0 0.0
101 104 2.635 120 11.0 12.0 0.0
104 105 2.635 120 30.0 36.0 0.0
105 106 2.154 120 51.0 12.0 0.0
104 107 2.154 120 60.0 70.0 0.0
106 107 2.154 120 20.0 15.0 0.0
108 109 2.154 120 20.0 15.0 0.0
107 108 2.154 120 53.0 12.0 0.0
109 110 2.154 120 44.0 12.0 0.0
110 111 2.154 120 30.0 18.0 0.0
108 111 2.154 120 54.0 70.0 0.0
111 112 2.154 120 32.0 0.0 0.0
112 113 2.154 120 20.0 18.0 0.0
113 116 2.154 120 7.0 6.0 0.0
116 117 2.154 120 15.0 0.0 0.0
102 112 2.154 120 147.0 130.0 0.0
103 114 2.154 120 110.0 6.0 0.0
114 115 2.154 120 12.0 0.0 0.0
115 113 2.154 120 8.0 6.0 0.0
116 118 1.687 120 7.5 9.0 1.5
117 121 1.687 120 7.5 9.0 1.5
118 119 1.687 120 12.0 0.0 0.0
121 122 1.687 120 12.0 0.0 0.0
119 120 1.452 120 12.0 0.0 0.0
122 123 1.452 120 12.0 0.0 0.0
114 124 1.452 120 1.5 5.0 1.5
115 125 1.452 120 1.5 5.0 1.5
. • • • • • • •
•• • • • • . • • •
. • . . •
• • • • • • • • • •
• • • ••• •
• • • • • . • • • • •
• •
• olio • oli • •..
• olio • •. • •••
NUMBER OF LOOPS = 4 • • •• • . • •. • • • ••
• • . • •
. . • • • • • • • • •
• • • ••• • • •
FROM TO DIAM. HW -C LENGTH EQ. LN. EL. DIFF.
(IN.) (FT.) (FT.) •4F$'.4 • •• .•o ..
1 2 4.070 150 70.0 24.2 . .5. E 0 O ' ' ' ' ' '•
2 3 4.070 150 12.0 120.9 ..0.0 • • �• ••• ••: •
• ••• • •• • •••
• • • • • • • • • •
• • •• • • •• • • • • ••
• • • • • • • • •
• • • • • • • • • • •
• • •. • • •
****** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
* * ** HYDRAULIC ANALYSIS WITH REQUIRED FLOW AT ri MQTg }EA• •* *••
****************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * **! * *24 1*# *i *i *ii * *, • • • • •
•
* ** *SUMMARY OF SPRINKLER SYSTEM OPERATION * * **
*
THE FOLLOWING SPRINKLERS ARE OPERATING
LOCATION SPRINKLER K
118 11.20
119 11.20
120 11.20
121 11.20
122 11.20
123 11.20
124 11.20
125 11.20
NODES FLOW PIPE EQV.
ELEVATION FLOW PRESSURE
9.50 35.10 9.82
9.50 32.67 8.51
9.50 31.24 7.78
9.50 33.73 9.07
9.50 31.38 7.85
9.50 30.00 7.17
9.50 46.51 17.24
9.50 45.68 16.63
• •
•
•• • • • • • •• • •
••• • • • • ••
• • • •
• • • • •
• • • • • • •
•• • • •
•
• •
• •• • • • •
••• • • • • •••
THE TOTAL SPRINKLER FLOW DELIVERED = 286.29 GPM
THE OUTSIDE HOSESTREAM FLOW OF 200 GPM OPERATES AT 62.63 PSI
THE INSIDE HOSESTREAM FLOW OF 50 GPM OPERATES AT 50.03 PSI
THE MINIMUM DENSITY PROVIDED BY THIS SYSTEM IS 0.153 CPM /SQ FT
WATER SUPPLY CHARACTERISTICS
LOCATION AT PIPE NO 1
STATIC PRESSURE = 65 PSI
RESIDUAL PRESSURE = 45 PSI AT 1700 GPM
OPERATING PRESSURE = 58.33 PSI
AVAILABLE PRESSURE = 62.63 PSI AT 536.24 GPM
** EXCESSIVE (OR REQUIRED) SUPPLY PRESSURE = 4.3 PSI * * * * * * * **
********************* xxx xx********* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
*********************************** * * * * * * * * * * * * * * * * * * *** * * * * * * * * **
* * * * * * * * * * ** SUMMARY OF HYDRAULIC CALCULATIONS * * * * * * * * * * * **
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
H -W DIA. PSI/ ELEV. START END DIFF.
• • ••• • • • •••
•• •• • • • • • •• •
• • • • • • • • • •
• • • ••• • • •
• • • • • • • •
• • .. • .. • • •
FROM -TO (GPM) (FT.) FT -C- IN. 100 -,FT PSI. PSI. PSI. PSI.
1 2 336.2 70.0 24.2 150 4.07 24R i • .1.17.•'5(raf :64. 16• -0.12
2 3 336.2 12.0 120.9 150 4.07 2.1'7 '0.00 5w.�� 2.88
3 5 336.2 110.0 31.7 150 4.07 2.17 0.00 55.58 52.50 3.07
5 6 336.2 4.0 10.0 120 4.26 2.62.. 1. • 5; 2.10
6 7 336.2 4.0 10.0 120 4.26 2.61. :5040:, 50 0.37
7 8 286.2 10.0 10.0 120 4.26 1.95 : 3.4 d :50'44 45./4 4.29
8 9 0.0 2.0 0.0 120 4.26 0.06 b.43 . 45.74"'43!31 0.43
9 10 0.0 3.0 10.0 120 4.26 0.00 0.00 45.31 45.31 0.00
10 11 0.0 17.7 0.0 120 4.26 0.00 6.79 45.31 38.52 6.79
11 12 0.0 16.7 0.0 120 4.26 0.00 6.35 38.52 32.17 6.35
8 100 286.2 4.5 19.0 120 2.63 20.21 0.00 45.74 40.99 4.75
100 101 286.2 20.0 0.0 120 2.63 20.21 0.00 40.99 36.95 4.04
101 102 192.1 19.0 12.0 120 2.63 9.66 0.00 36.95 33.96 2.99
102 103 128.7 20.0 0.0 120 2.63 4.60 0.00 33.96 33.04 0.92
101 104 94.1 11.0 12.0 120 2.63 2.58 0.00 36.95 36.36 0.59
104 105 47.8 30.0 36.0 120 2.63 0.73 0.00 36.36 35.87 0.48
105 106 47.8 51.0 12.0 120 2.15 1.96 0.00 35.87 34.64 1.23
104 107 46.3 60.0 70.0 120 2.15 1.85 0.00 36.36 33.95 2.41
106 107 47.8 20.0 15.0 120 2.15 1.96 0.00 34.64 33.95 0.69
108 109 45.6 20.0 15.0 120 2.15 1.80 0.00 29.48 28.85 0.63
107 108 94.1 53.0 12.0 120 2.15 6.88 0.00 33.95 29.48 4.47
109 110 45.6 44.0 12.0 120 2.15 1.80 0.00 28.85 27.85 1.01
110 111 45.6 30.0 18.0 120 2.15 1.80 0.00 27.85 26.98 0.86
108 111 48.5 54.0 70.0 120 2.15 2.02 0.00 29.48 26.98 2.50
111 112 94.1 32.0 0.0 120 2.15 6.88 0.00 26.98 24.78 2.20
112 113 157.6 20.0 18.0 120 2.15 17.86 0.00 24.78 18.00 6.79
113 116 194.1 7.0 6.0 120 2.15 26.27 0.00 18.00 14.58 3.42
116 117 95.1 15.0 0.0 120 2.15 7.01 0.00 14.58 13.53 1.05
102 112 63.4 147.0 130.0 120 2.15 3.31 0.00 33.96 24.78 9.17
103 114 128.7 110.0 6.0 120 2.15 12.27 0.00 33.04 18.81 14.23
114 115 82.2 12.0 0.0 120 2.15 5.35 0.00 18.81 18.17 0.64
115 113 36.5 8.0 6.0 120 2.15 1.19 0.00 18.17 18.00 0.17
116 118 99.0 7.5 9.0 120 1.69 24.82 0.65 14.58 9.84 4.75
117 121 95.1 7.5 9.0 120 1.69 23.04 0.65 13.53 9.08 4.45
118 119 63.9 12.0 0.0 120 1.69 11.04 0.00 9.84 8.51 1.32
121 122 61.4 12.0 0.0 120 1.69 10.24 0.00 9.08 7.85 1.23
119 120 31.2 12.0 0.0 120 1.45 6.09 0.00 8.51 7.78 0.73
122 123 30.0 12.0 0.0 120 1.45 5.65 0.00 7.85 7.17 0.68
114 124 46.5 1.5 5.0 120 1.45 12.71 0.65 18.81 17.33 1.48
115 125 45.7 1.5 5.0 120 1.45 12.29 0.65 18.17 16.72 1.45
THE MAXIMUM VELOCITY OF 17.08 FT /S OCCURS BETWEEN NODES 113 AND 116
HYDRAULIC CALCULATIONS ACCURACY CHECKS (UNBALANCED PRESSURE IN LOOPS):
LOOP # 1 - NODES: 104 107 108 111 112 102 101 104
UNBALANCED PRESSURE = - 0.0059 PSI
LOOP # 2 - NODES: 112 113 115 114 103 102 112
UNBALANCED PRESSURE = - 0.0051 PSI
LOOP # 3 - NODES: 107 106 105 104 107
UNBALANCED PRESSURE = - 0.0000 PSI
• • .•• • • • .••
•• •• • • • • •• •• •
• • • • • • • • • • •
• • • ••• • • • •
• • • • • • • • •
• • ••• • • • • •••
LOOP # 4 - NODES: 111 110 109 108 111 ••• • • • • ••
UNBALANCED PRESSURE = 0.0000 PSI • • • •• • • • , • :• • • • ..
• • • • • • • • • • • .
• • • • • • • • • • • •
+ • ••• • •
*********************************** * * * * * * * * * * * * * * * * * * * * * * * ** * * * ***
•• • • • •• •.• ••
* * * ** END OF SIMULATION * * * **
• • •
• •
• •
•
•
•• • • • • • ••• ••
HYDRAULIC Di&TA° $I 1ET
DESIGN:
LOCATION:
PROJECT:
AREA:
DESIGN:
HOSE ALLOWANCE:
CONSTRUCTION:
SYSTEM TYPE:
SPRINKLER TYPE:
C- FACTOR:
FLOW 'PEST:
CALCULATION SUMMARY:
FIRE PUMP:
MULLER FIRE PROTECTION INC
3200 N.W. 38 STREET
MIAMI, FLORIDA 33142
VILLAGE DEL MAR
SE CORNER OF 105 ST. AND BISCAYNE BLVD.
MIAMI SHORES, FLORIDA
THIRD FLOOR UNIT C-4 REMOTE HEADS AREA 3
N.F.P.A. 13R
INSIDE: 50 GPM
OUTSIDE: 50 GPM
CONCRETE SLAB WITH CONCRETE BLOCK
EXTERIOR AND INTERIOR MAIN DIVIDING WALLS.
INTERIOR PART H'IONS TO BE METAL STUD AND
DRYWALL WITH DRYWALL CEILINGS
WET
.... • DATV,;,„MiseitCH 11, 2005
•
• • • •
• • •
•
.. .. • ......•
TYCO LF -II RESIDENTIAL CHROME RECESSED
PENDENT 155 DEG 1/2 NPT K =4.9
TYCO LF -II RESIDENTIAL CHROME HORIZONTAL
SIDEWALL 155 DEG 1/2 NPT K=4.2
INSIDE: C =120 STEEL
C=150 CPVC PLASTIC
UNDERGROUND: C =140 DUCTILE IRON
C =150 C -900 DR14 PLASTIC
65 PSI STATIC 45 PSI RESIDUAL @ 1700 GPM FLOW
62.75 PSI @ 72.73 GPM CITY CONNECTION
N/A
i
3
� < i<1 fl +O t- q d
4' N G.P.M. MULTIPLY SCALE BY j' �
rg .« QQ
r
0
13 • • •••s • 6 7 6 9 10 11 12
yy • • • • • 1 . -
iiuhIIIElalLi�I8LL1I
1pIHIii nnniui■uiaMiu■ -
iiiiillintiiii
1111111M8111111111111111 ,
INMENIMMilinnillin Mignini
a i1.����
j!IIIIIIIIIIIIHHIIUIIIII
il lili lli lliiiiiiii11111111
t UI[!1IIi1iiiiir!!!flhlII■ -
iBS.!1I■1�7
5 X51
* ** FIRENET * **
HYDRAULIC ANALYSIS OF A FIRE PROTECTION SPRINKLER SYSTEM
VERSION 2.2 - JANUARY 1992
DATE FOR THIS COMPUTER RUN = 03 -11 -05 - TIME = 04:01:11
ID FOR THIS COMPUTER RUN = THIRD FLOOR UNITC -4 REMOTE HEADS
INPUT DATA FILE NAME = A:\14UNT3FC.DAT
OUTPUT DATA FILE NAME = A: \14UNT3FC.OUT ��•��. •��• • •
•
• •
• • • •
.••.
• • (•.. • • •
* * * * * * * * * * * ** SPRINKLER SYSTEM DATA SUMMARY * * * * * * * * * * * ***** • • ••• •
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** • • •
WATER SUPPLY CHARACTERISTICS:
STATIC PRESSURE = 65 PSI
RESIDUAL PRESSURE = 45 PSI
RESIDUAL FLOW = 1700 GPM
ELEVATION OF PRESSURE GAGE = 2 FT.
FLOW REQUIREMENTS:
OUTSIDE HOSE FLOW REQUIREMENT (AT SUPPLY) = 0 GPM
INSIDE HOSE FLOW REQUIREMENT (AT LOCATION 0 ) = 0 GPM
TOTAL SPRINKLER SYSTEM FLOW REQUIRED (BASE OF RISER) = 0 GPM
SPRINKLER INFORMATION:
MAXIMUM SPACING OF SPRINKLER HEADS = 16 FT.
MAXIMUM SPACING OF BRANCH LINES = 16 FT.
REQUIRED MINIMUM FLOW (PER SPRINKLER) = 16 GPM
REQUIRED MINIMUM FLOW DENSITY = .05 GPM /SQ. FT.
OTHER SPRINKLER SYSTEM DATA:
DEFAULT VALUE FOR C- FACTOR = 120
NUMBER OF BOOSTER PUMPS = 0
SUMMARY OF SPRINKLER OPERATION:
SPRINKLER CONSTANT = 4.9
LOCATION OF OPERATING SPRINKLERS:
316
LOCATION OF OPERATING SPRINKLERS:
319
SPRINKLER CONSTANT = 4.2
LOCATION OF OPERATING SPRINKLERS:
315
LOCATION OF OPERATING SPRINKLERS:
318
•
* ******* ** ******* ** ******* ** ******* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
••••
• • ••••
• • • •
•• • • • •• •
• • • •
•
• • •
•••• •• • • •
▪ • • •
• .. • • .•
• •
************************************* * * * * * * * * * * * * * * * * * * * * * * * * *** * *• •
* * * * * * * * * * * * ** PIPE DATA SUMMARY * * * * * * * * * * * ****
************************************* * * * * * * * * * * * * * * * * * * * * * * * * **** *.•
•
NUMBER OF PIPES = 26
NUMBER OF JUNCTIONS = 27
NUMBER OF LOOPS = 0
FROM TO DIAM. HW -C LENGTH EQ. LN. EL. DIFF.
(IN.) (FT.) (FT.) (FT.)
1 2 4.070 150 70.0 24.2 -5.0
2 3 4.070 150 12.0 %2116.4 0.0
3 5 4.070 150 110.0 31.7 0.0
5 6 4.260 120 4.0 10.0 4.0
6 7 4.260 120 4.0 10.0 0.0
7 8 4.260 120 10.0 10.0 9.0
8 9 4.260 120 2.0 0.0 1.0
9 10 4.260 120 3.0 10.0 0.0
10 11 4.260 120 17.7 0.0 15.7
11 12 4.260 120 16.7 0.0 14.7
12 300 2.154 120 1.0 6.0 0.0
300 301 2.154 120 17.0 9.0 0.0
301 302 2.003 150 84.0 120.9 0.0
302 303 2.003 150 70.0 99.8 0.0
303 304 2.003 150 3.0 12.1 0.0
304 305 2.003 150 12.0 13.6 0.0
305 310 1.598 150 12.0 24.2 0.0
310 311 1.598 150 5.0 12.1 0.0
311 312 1.394 150 4.0 1.5 0.0
312 313 1.394 150 5.0 1.5 0.0
313 314 1.101 150 8.0 19.7 0.0
314 315 1.101 150 4.3 19.7 -0.3
310 316 1.101 150 2.3 10.6 -0.3
313 317 1.101 150 2.0 9.1 0.0
317 318 1.101 150 3.3 19.7 -0.3
317 319 1.101 150 -0.3 9.1 -0.3
* * * * * * * * **
• •
.. •.
** *******xx xx x* ***** * * * * * * * * * * * * * * * * * * * * * * * * * ** * * **
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * ** * **
* * ** HYDRAULIC ANALYSIS WITH REQUIRED FLOW Al REMOTE HEAD * * **
• • .•
• •
•
• ••• •
•
• • • •
•• •
• • •
•.•• •• • • •
• • • • •
• • ••
• • • .
• • •
•• •
•
•
• • •
• • •
• •
• • •••• • •
• • •
•• • • • •• • •
• • •
•
* ** *SUMMARY OF SPRINKLER SYSTEM OPERATION * * **
THE FOLLOWING SPRINKLERS ARE OPERATING
THE TOTAL SPRINKLER FLOW DELIVERED = 72.76 GPM
THE MINIMUM DENSITY PROVIDED BY THIS SYSTEM IS 0.062 GPM /SQ FT
WATER SUPPLY CHARACTERISTICS
LOCATION AT PIPE NO 1
STATIC PRESSURE = 65 PSI
RESIDUAL PRESSURE = 45 PSI AT 1700 GPM
OPERATING PRESSURE = 62.75 PSI
AVAILABLE PRESSURE = 64.94 PSI AT 72.73 GPM
* * * * * * * ** EXCESSIVE (OR REQUIRED) SUPPLY PRESSURE = 2.19 PSI * * * * * * * **
*********************************** ** * * * * * * * * * * * * * * * * * * * * * * * * * * * **
* * * * * * * * * * ** SUMMARY OF HYDRAULIC CALCULATIONS * * * * * * * * * * * **
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
••••
• •
• • ••••
• • • •
• • • ••• •
• • • •
•• •
•
• • •
•••• • • •
• • • • •
•••• • ••
LOCATION SPRINKLER K ELEVATION FLOW PRESSURE • • ...r
316 4.90 38.99 21.43 19.12
•• •• •• •
319 4.90 38.99 18.95 14.95 • • • •
315 4.20 38.99 16.39 15.22 .•.•..
318 4.20 38.99 16.00 14.51 • ••. ••••
•• • • •••
• • •
• •
NODES FLOW PIPE EQV. H -W DIA. PSI/ ELEV. START END DIFF.
FROM -TO (GPM) (FT.) FT -C- IN. 100 -FT PSI. PSI. PSI. PSI.
1 2 72.7 70.0 24.2 150 4.07 0.13 -2.17 62.75 64.80 -2.05
2 3 72.7 12.0 %2116.4 150 4.07 0.13 0.00 64.80 62.09 2.71
3 5 72.7 110.0 31.7 150 4.07 0.13 0.00 62.09 61.91 0.18
5 6 72.7 4.0 10.0 120 4.26 0.15 1.73 61.91 60.15 1.75
6 7 72.7 4.0 10.0 120 4.26 0.15 0.00 60.15 60.13 0.02
7 8 72.7 10.0 10.0 120 4.26 0.15 3.90 60.13 56.20 3.93
8 9 72.7 2.0 0.0 120 4.26 0.15 0.43 56.20 55.77 0.44
9 10 72.7 3.0 10.0 120 4.26 0.15 0.00 55.77 55.75 0.02
10 11 72.7 17.7 0.0 120 4.26 0.15 6.79 55.75 48.93 6.81
11 12 72.7 16.7 0.0 120 4.26 0.15 6.35 48.93 42.55 6.38
12 300 72.7 1.0 6.0 120 2.15 4.27 0.00 42.55 42.26 0.30
•
• •
•
300 301 72.7
301 302 72.7
302 303 72.7
303 304 72.7
304 305 72.7
305 310 72.7
310 311 51.3
311 312 51.3
312 313 51.3
313 314 16.4
314 315 16.4
310 316 21.4
313 317 34.9
317 318 16.0
317 319 18.9
17.0
84.0
70.0
3.0
12.0
12.0
5.0
4.0
5.0
8.0
4.3
2.3
2.0
3.3
-0.3
9.0
120.9
99.8
12.1
13.6
24.2
12.1
1.5
1.5
19.7
19.7
10.6
9.1
19.7
9.1
120 2.15 4.27 0.00
150 2.00 4.02 0.00
150 2.00 4.02 0.00
150 2.00 4.02 0.00
150 2.00 4.02 0.00
150 1.60 12.08 0.00
150 1.60 6.33 0.00
150 1.39 12.31 0.00
150 1.39 12.31 0.00
150 1.10 4.69 0.00
150 1.10 4.69 -0.14
150 1.10 7.70 -0.14
150 1.10 19.06 0.00
150 1.10 4.49 -0.14
150 1.10 6.13 -0.14
42.26 41.15
41.15 32.91
32.91: 2008
26.08 . 25.47
25.47"24M5 2.'03'
24.45"21!157 4.37
20.07..'.1x.99 il'.0t.
18.99 'f31 . 0.tt
18.31
17.51 l!
.
16.21: 1543 0
20.07. 19
17.51%1540
15.40 14.51
15.40 15.01 0.39
THE MAXIMUM VELOCITY OF 11.77 FT /S OCCURS BETWEEN NODES 313 AND 317
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
* * * ** END OF SIMULATION * * * **
.cr. w •
HYDRAULIC DATA SHEET
DESIGN:
LOCATION:
PROJECT:
AREA:
DESIGN:
HOSE ALLOWANCE:
CONSTRUCTION:
SYSTEM TYPE:
SPRINKLER TYPE:
C- FACTOR:
FLOW TEST:
CALCULATION SUMMARY:
FIRE PUMP:
MULT .FR FIRE PROTECTION INC
3200 N.W. 38 STREET
MIAMI, FLORIDA 33142
DATE' MARCH 11, 2005
• • • •
•••• • ••
• • •
• •
• •
.. •
VILLAGE DEL MAR
SE CORNER OF 105 ST. AND BISCAYNE BLVD.
MIAMI SHORES, FLORIDA
WET
INSIDE: C =120 STEEL
C =150 CPVC PLASTIC
UNDERGROUND: C =140 DUCTILE IRON
C =150 C -900 DR14 PLASTIC
•
•
....
•
• •••
• • ..
• •
THIRD FLOOR UNIT B-4 REMOTE BEADS AREA 3
N.F.P.A. 13R
INSIDE: 50 GPM
OUTSIDE: 50 GPM
CONCRETE SLAB WITH CONCRETE BLOCK
EXTERIOR AND INTERIOR MAIN DIVIDING WALLS.
INTERIOR PARTHIONS TO BE METAL STUD AND
DRYWALL WITH DRYWALL CEILINGS
TYCO LF -II RESIDENTIAL CHROME RECESSED
PENDENT 155 DEG 1/2 NPT K=4.9
TYCO LF -II RESIDENTIAL CHROME HORIZONTAL
SIDEWALL 155 DEG 1/2 NPT K=4.2
65 PSI STATIC 45 PSI RESIDUAL @ 1700 GPM FLOW
56.7 PSI @ 70.35 GPM CITY CONNECTION
N/A
P.S.1. MULTIPLY SCALE BY e
4
6 7 8 9
O
i
iiiiimmommiu mivammuemsommosumismaaurnommaaarrmomminranueaonumrmrommo mmirserusihrhrrsirrmiuma
sss■ss■■ssssssasssssssasas■■ saes■ sss■■ ss ■■■■s■s■■sss■czWiuss■u■s■■sr: s■sss■nnc■h ■■srsrsrPnssssssss
as•■ s■s ssss■■■ sssssssli ■1111ssommu■sss■■■■u■■■■111■r sr..s■su■■■ jigs ■1■111■1■sssssrssrsrssu■sus■r
sss sassasssss■sessss■■asaaasaaass■ ssss■ sssssss sssssssazacissssasss. in : ssss•Joa 000 sasrsrrssrssssrttt
11111■ ■11111■ ■1111 ■1 ■11 ■1111 ■11■ ■1111111■ ■511■ MI6■ 11■■ 1ANC511■ r; ■■1 115 I 811111 AuANIIA 111111 ■ ■ ■ 111 ■ / ■
1351111181111111 11111111111111111 ■1111111111111111111OPPI :111(11111W1 11111111111111111111111111 .999
11111■ 1111 111111111111111151111111151 111111111151111■i1911 111111 11.0 1 r 4111 114 WWWWt 1111 GC 11 c 11111[311 ■
11■ 811511 181111111511188111818511811188 11118111111151uuel1u1111mr !151151aaaarmer
111 115111111111111/ 11111111I11111111I1111 11Iuuuui111IrewJIU11111` 7I111111IlI *m11uIflhPPIIIIIIIc
1111111111111111115 11111 11111 / 11111111111111111111111:1 1 11111111M11111111101I0111131CIC111111111
111111111111111111111111111111111111111111111111111111Ei:: 111111111111111111111111011111 .
111111111111111111 111111111111111 111111111111111111111! 111111111111111111111dl1ll11111
11111111111111111111111111111111111111111111111111111MIIN1111111111111111d111111111AI000IIIIILMt
111111111111111111111111111111111111111111111111111111111111111111111111111311414IIIIII0000IIIIIF #l11
111111111111111111111111 111111111111111111111111111111111ri111111111111111111di11i1 IIIeGIFGF1111L1
111111111111111111111111111111111111111i1111111111111111111111111111111111111111111111G011G1111111
111111111111111111 11111111111111111111111111111111111111f11111111111111111111111111111111111111111111
11111111111111111111111111111111111111111111111111111111 1111IIIIIIIIN111111111111111111111111111111
11111111111111111111111111111111111111111111111111111111 11111111111111111111111IIIIIIIII11111111111
11111111111111111IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII1911I1I1I11111111111111III111111111111111111I1
11111111111111111II11I1IIII111111111111111II1111I11111111I111111111I11111111111111111111111111111111
11111111111111111111111111111111111111111111111111111611111111111111111111111111111 11111111111111111
1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111 111111111111
1111111111111111111111111111111111111111111111111111► 1111111111111111111111 11111111111111111111111111
1111111111111111111111111111111111111111111111111111 111111111111111111111111111111111111111111111111
111111nnnn I11111111111111111111I11111Iui 11111111111 1111111111111111I11I1II111I1111111111111111111111
1111111111 IIIIIIIIIIII111111111111111111111I111111111I1111111111111111111111111111111111111111111111
1111111111111111111111111111111111111111IIIII111111111111111111111111111111111111111111111 ;11111111
111111111111111111111111111111111111111111111111W111111111111111111111111111111111111111101111111
11111111111111111111111111111111111111111111111111111111111111111111111111111111IIn1111111111111111
111111111111111111111111111111111111111111111111111111IIIIIIIIIUh1111111111111111111111111111111111
1111111111111111111111111111111111111111111111► 11111111111111111111111I1111111111II1 11111111111111111
111111111111111111111111111111IIIIIIIIII111111I11111111111111111111111111111111111111111111111111111
111111111111111111111111111111IIIIIIIIIIIIII1Il! IIIIIIII11 1IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIII1III11111111111111IIIIIIIIIIIIIIIIIIIIIIIIIIIII1111111IIIIIIIIIII111111111IIIIIIIIIIIIi811111
IIIIIIIIIIIIIIIIIIIIIIIIIIIi111111111111111111I1 1i 1111IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
11111111111111111111111111111I11111111111111111I401111111111111111111IIIIIIIIIIIIIII11IIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIIIII11111IIIIII! IIIIII' P111111111111111111111111111111111IIIIIIIIIIIIIII
IIIII111111111111111111111111111111111111111111i! iiil1l111111111111111I1111111111111111111111111111
111111111111111111111111111111111111111P IIIIIIIi11111111111111111111111111111111IIIII111111111111111
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIilIllllIIII11I11IIllllIIII111111IIIIIlIIIIilllIIIlllIlIlIIIII
IIIIIIIIIIIIIIINIIIIIIIIIIIII111111111111IIIIIIIIIIIIIINIIIIIIIIIIIIIIIIIIIII11111111111111II11111
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIII1111111111 III II IIIII II111111II IIIIIIIIII IIIII IRII IIIII IIIII IIIII IIIII IIII I NII I N111111II
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIHIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII1IIIIIIIIIIIII
IIIIII11111111111111II1I1I11111I11IIII1111111111u1IIIIIIIII1111111111IIIIIIIIIINIIIIIIIIIIIIIIIIII
1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
III IIIII111111111111111IIIIII111111I111111111111III111111I1111111111111111111III1111111111111111111
0 1 Z 3
►zed
a
C
r
r
0
a
r
m
w 19r5b
p 2ta►
* ** FIRENET * **
HYDRAULIC ANALYSIS OF A FIRE PROTECTION SPRINKLER SYSTEM
VERSION 2.2 - JANUARY 1992
DATE FOR THIS COMPUTER RUN = 03 -11 -05 - TIME = 04:29:48
ID FOR THIS COMPUTER RUN = THIRD FLOOR UNIT B -4 REMOTE HEADS
INPUT DATA FILE NAME = A: \14UNT3FB.DAT
OUTPUT DATA FILE NAME = A: \14UNT3FB.OUT
* * * * * * * * * * * ** SPRINKLER SYSTEM DATA SUMMARY * * * * * * * * * * * * * * ** ....
• •
************************************* * * * * * * * * * * * * * * * * * * * * * * * * *.* * *0 ••••
• • •
.• •
WATER SUPPLY CHARACTERISTICS:
STATIC PRESSURE = 65 PSI
RESIDUAL PRESSURE = 45 PSI
RESIDUAL FLOW = 1700 GPM
ELEVATION OF PRESSURE GAGE = 2 FT.
SPRINKLER INFORMATION:
MAXIMUM SPACING OF SPRINKLER HEADS = 16 FT.
MAXIMUM SPACING OF BRANCH LINES = 16 FT.
REQUIRED MINIMUM FLOW (PER SPRINKLER) = 16 GPM
REQUIRED MINIMUM FLOW DENSITY = .05 GPM /SQ. FT.
OTHER SPRINKLER SYSTEM DATA:
DEFAULT VALUE FOR C- FACTOR = 120
NUMBER OF BOOSTER PUMPS = 0
SUMMARY OF SPRINKLER OPERATION:
SPRINKLER CONSTANT = 4.2
LOCATION OF OPERATING SPRINKLERS:
324
LOCATION OF OPERATING SPRINKLERS:
326 327
SPRINKLER CONSTANT = 4.9
LOCATION OF OPERATING SPRINKLERS:
325
•
. . . .
• •
Oslo
• •
•• ••
• • ••
** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
• • • • .
•• •
• . •
•. • • •
• • •
• .•
O 0 00
• • •
.. •
•
• •
•
• ▪ •
• • •••• • •
FLOW REQUIREMENTS: • • •
•. • • ••• •
OUTSIDE HOSE FLOW REQUIREMENT (AT SUPPLY) = 0 GPM • • •
. •
INSIDE HOSE FLOW REQUIREMENT (AT LOCATION 0 ) = 0 GPM
TOTAL SPRINKLER SYSTEM FLOW REQUIRED (BASE OF RISER) = 0 GPM
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
* * * * * * * * * * * * ** PIPE DATA SUMMARY * * * * * * * * * * * * * **
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
NUMBER OF PIPES = 24
NUMBER OF JUNCTIONS = 25
NUMBER OF LOOPS = 0
FROM TO DIAM. HW -C LENGTH EQ. LN. EL. DIFF.
(IN.) (FT.) (FT.) (FT.)
1 2 4.070 150 70.0 24.2 -5.0
2 3 4.070 150 12.0 %2116.4 0.0
3 5 4.070 150 110.0 31.7 0.0
5 6 4.260 120 4.0 10.0 4.0
6 7 4.260 120 4.0 10.0 0.0
7 8 4.260 120 10.0 10.0 9.0
8 9 4.260 120 2.0 0.0 1.0
9 10 4.260 120 3.0 10.0 0.0
10 11 4.260 120 17.7 0.0 15.7
11 12 4.260 120 16.7 0.0 14.7
12 300 2.154 120 1.0 6.0 0.0
300 301 2.154 120 17.0 9.0 0.0
301 302 2.003 150 84.0 120.9 0.0
302 303 2.003 150 70.0 99.8 0.0
303 304 2.003 150 3.0 12.1 0.0
304 305 2.003 150 12.0 13.6 0.0
303 320 1.394 150 3.0 9.1 0.0
320 321 1.394 150 2.0 1.5 0.0
321 322 1.394 150 1.0 1.5 0.0
322 323 1.101 150 5.0 1.5 0.0
323 324 1.101 150 23.3 33.3 -0.3
323 327 1.101 150 1.3 24.2 -0.3
320 325 1.101 150 2.8 16.6 -0.8
321 326 1.101 150 1.3 24.2 -0.3
•
• • •
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
*********************************** * * * * * * * * * * * * * * * ** * * * * * * * * * * * * **
* * ** HYDRAULIC ANALYSIS WITH REQUIRED FLOW AT REMOTE HEAD * * **
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
•
• • ••••
• • • •
•• • • •••
• • • •
•
..
•
• •
• •• • • •
• • • • •
•••• • ••
••••
• • • • •
•• •• •• •
•
.�
•
• • ••••
• •
• • •••• • •
• • •
•• • • • • •
• • •
•• •
* ** *SUMMARY OF SPRINKLER SYSTEM OPERATION * * **
THE FOLLOWING SPRINKLERS ARE OPERATING
LOCATION
324
326
327
325
THE TOTAL SPRINKLER FLOW DELIVERED = 70.37 GPM
THE MINIMUM DENSITY PROVIDED BY THIS SYSTEM IS 0.062 GPM /SQ F/ .••
•• •
WATER SUPPLY CHARACTERISTICS
LOCATION AT PIPE NO 1
STATIC PRESSURE = 65 PSI
RESIDUAL PRESSURE = 45 PSI AT 1700 GPM
OPERATING PRESSURE = 56.7 PSI
AVAILABLE PRESSURE = 64.94 PSI AT 70.35 GPM
* * * * * * * **
NODES FLOW
FROM -TO (GPM)
SPRINKLER K
4.20
4.20
4.20
4.90
1 2 70.4
2 3 70.4
3 5 70.4
5 6 70.4
6 7 70.4
7 8 70.4
8 9 70.4
9 10 70.4
10 11 70.4
11 12 70.4
12 300 70.4
300 301 70.4
301 302 70.4
302 303 70.4
303 304 0.0
EXCESSIVE (OR REQUIRED) SUPPLY PRESSURE = 8.23
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * ** * * **
* * * * * * * * * * ** SUMMARY OF HYDRAULIC CALCULATIONS * * * * * * * * * * * **
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
PIPE
(FT.)
70.0
12.0
110.0
4.0
4.0
10.0
2.0
3.0
17.7
16.7
1.0
17.0
84.0
70.0
3.0
ELEVATION FLOW PRESSURE
38.99 16.00 14.51
38.99 17.28 16.93
38.99 16.62 15.67
38.49 20.47 17.45
EQV.
FT
H -W DIA.
-C- IN.
24.2 150 4.07
$2116.4 150 4.07
31.7 150
10.0 120
10.0 120
10.0 120
0.0 120
10.0 120
0.0 120
0.0 120
6.0 120
9.0 120
120.9 150
99.8 150
12.1 150
4.07
4.26
4.26
4.26
4.26
4.26
4.26
4.26
2.15
2.15
2.00
2.00
2.00
•
0000
• •
0000
.• .•
• • • •
••••
• •
0000
• ••
•
•• •
•
•• •
• • •
• ••
•
• • •
• • •
•
• ••••
• •
• • ...•
PSI• * *4**0 * * **
•• • • •••
• • •
•• •
PSI/ ELEV. START END DIFF.
100 -FT PSI. PSI. PSI. PSI.
0.12 -2.17 56.71 58.76 -2.05
0.12 0.00 58.76 56.21 2.55
0.12 0.00 56.21 56.05 0.17
0.14 1.73 56.05 54.29 1.75
0.14 0.00 54.29 54.27 0.02
0.14 3.90 54.27 50.34 3.93
0.14 0.43 50.34 49.91 0.44
0.14 0.00 49.91 49.89 0.02
0.14 6.79 49.89 43.08 6.81
0.14 6.35 43.08 36.70 6.38
4.01 0.00 36.70 36.42 0.28
4.01 0.00 36.42 35.38 1.04
3.78 0.00 35.38 27.63 7.75
3.78 0.00 27.63 21.21 6.42
0.00 0.00 21.21 21.21 0.00
304 305 0.0 12.0 13.6 150 2.00 0.00 0.00 21.21 21.21 0.00
303 320 70.4 3.0 9.1 150 1.39 22.09 0.00 21.21 18.55 2.67
320 321 49.9 2.0 1.5 150 1.39 11.69 0.00 18.55 18.14 0.41
321 322 32.6 1.0 1.5 150 1.39 5.32 '0.00 18.14 18.00 0.13
322 323 32.6 5.0 1.5 150 1.10 16.79 0.00 18.00 16.91 1.09
323 324 16.0 23.3 33.3 150 1.10 4.49 -0.14 16.91 14.51 2.40
323 327 16.6 4.3 24.2 150 1.10 4.82 -0.14 16.91 15.68 1.23
320 325 20.5 2.8 16.6 150 1.10 7.07 -0.36 18.55 17.53 1.02
321 326 17.3 1.3 24.2 150 1.10 5.17 -0.14 18.14 16.96 1.18
THE MAXIMUM VELOCITY OF 14.78 FT /S OCCURS BETWEEN NODES 303 AND 32Q"",
• • ••••
• • •
•• • • •••
• • •
•• •
•
*********************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * *** •
•• ••
* * * ** END OF SIMULATION * * * **
•••• • •
• • •• • •
• • ••
••••
• • •
•• •
•
•
•
•
•
•
•
•
• • •
• • ••••
• •
• • • • •
• • •
•• • • ••• • •
• • •
•• •
Mar 04 05 03:18p
DATE: 3/4/2005 LOCATION: 1200 N.E. 105th ST.
D NUMBER: 05360 -00072 FEE: 250.00
STATIC PRESSURE:
RESIDUAL PRESSUR
HYDRANT FLOW:
MIAMI -DADE COUNTY FIRE RESCUE DEPARTMENT
FIRE ENGINEERING & WATER SUPPLY SERVICES
FIRE FLOW REPORT
SPRINKLER STATIC:
SPRINKLER RESIDUAL:
SPRINKLER FLOW:
70 PSIG PITOT 1:
• 50 PSIG PITOT 2:
PITOT 3:
1762.99177536369
AVAILABLE FLOW @ 20 PSIG:
TIME OF TEST: 03/04/2005
TEST BY: Lt. M. Sheri!!
■
STATION: 30
PURPOSE:
2892
65
45
1700
COMMENTS:
Requested by Roy Muller of MULLER FIRE PROTECTION, INC.
35 (1) 2.5 IN. PSIG
35 . ( ?) 2.5 Co.' PSIG
• .. •
• 4.5 PI1 •-•-eAlG
• • •
•••• •• •
• • • • •
• • ••
• •
....
••••
• • •
•• •
•
p.2
•
•
• ..
• • ...•
• •
• • •••• • •
• • •
•• • • • • • •
• •
• •
•• •
— "l./ J"
1 , l LI �� /exe.k
O.I.0 SIGNITURE
tqca I Fire &Building
Products
Technical Services: Tel: (800) 381 -9312 / Fax: (800) 791 -5500
Series LFII Residential
Pendent Sprinklers
4.9 K- factor
General
Description
The Series LFII (TY2234) Residential
Pendent Sprinklers are decorative,
fast response, frangible bulb sprinklers
designed for use in residential occu-
pancies such as homes, apartments,
dormitories, and hotels. When aesthet-
ics and optimized flow characteristics
are the major consideration, the Series
LFII (TY2234) should be the first
choice.
The Series LFII are to be used in wet
pipe residential sprinkler systems for
one- and two- family dwellings and mo-
bile homes per NFPA 13D; wet pipe
residential sprinkler systems for resi-
dential occupancies up to and includ-
ing four stories in height per NFPA
13R; or, wet pipe sprinkler systems for
the residential portions of any occu-
pancy per NFPA 13.
The Series LFII (TY2234) has a 4.9
(70,6) K- factor that provides the re-
quired residential flow rates at reduced
pressures, enabling smaller pipe sizes
and water supply requirements.
The recessed version of the Series
LFII (TY2234) is intended for use in
areas with finished ceilings. It employs
a two -piece Style 20 Recessed Es-
cutcheon. The Recessed Escutcheon
provides 1/4 inch (6,4 mm) of recessed
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the "INSTALLER
WARNING" that provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. Improper handling and in-
stallation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
Page 1 of 8
adjustment or up to 1/2 inch (12,7 mm)
of total adjustment from the flush ceil-
ing position. The adjustment provided
by the Recessed Escutcheon reduces
the accuracy to which the pipe nipples
to the sprinklers must be cut.
The Series LFII (TY2234) has been
designed with heat sensitivity and
water distribution characteristics
proven to help in the control of residen-
tial fires and to improve the chance for
occupants to escape or be evacuated.
WARNINGS
The Series LFII (TY2234) Residential
Pendent Sprinklers described herein
must be installed and maintained in
compliance with this document, as
well as with the applicable standards
of the National Fire Protection Asso-
ciation, in addition to the standards of
any other authorities having jurisdic-
tion. Failure to do so may impair the
performance of these devices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.
Sprinkler/Model
Identification
Number
SIN TY2234
• •
•
••
••••
• •
••••
SEPTEMBER, 2004 TFP4OO
•
•
1••••
• •
1••••
Page 2 of 8
Technical
Data
Approvals:
UL and C -UL Listed. NYC Approved
under MEA 44 -03 -E.
Maximum Working Pressure:
175 psi (12,1 bar)
Discharge Coefficient:
K = 4.9 GPM/psilr (70,6 LPM/barli
Temperature Rating:
155 °F /68 °C or 175 °F /79 °C
Finishes:
White Polyester Coated,
Chrome Plated, or Natural Brass
Physical Characteristics:
Frame Brass
Button Bronze
Sealing Assembly
Beryllium Nickel w/Teflont
Bulb 3 mm dia. Glass
Compression Screw Bronze
Deflector Bronze
Ejection Spring .... Stainless Steel
tDuPont Registered Trademark
Operation
The glass Bulb contains a fluid that
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb allowing the sprinkler to
activate and flow water.
Design
Criteria
The Series LFII (TY2234) Residential
Pendent Sprinklers are UL and C -UL
Listed for installation in accordance
with the following criteria.
NOTE
When conditions exist that are outside
the scope of the provided criteria, refer
to the Residential Sprinkler Design
Guide TFP490 for the manufacturer's
recommendations that may be accept-
able to the local Authority having Juris-
diction.
System Type. Only wet pipe systems
may be utilized.
Hydraulic Design. The minimum re-
quired sprinkler flow rate for systems
designed to NFPA 13D or NFPA 13R
are given in Table A as a function of
temperature rating and the maximum
allowable coverage areas. The sprin-
kler flow rate is the minimum required
discharge from each of the total
number of "design sprinklers" as speci-
fied in NFPA 13D or NFPA 13R.
For systems designed to NFPA 13, the
number of design sprinklers is to be
the four most hydraulically demanding
sprinklers. The minimum required dis-
charge from each of the four sprinklers
is to be the greater of the following:
• The flow rates given in Table A for
NFPA 13D and 13R as a function of
TFP400
temperature rating and the maxi-
mum allowable coverage area.
• A minimum discharge of 0.1 gpm /sq.
ft. over the "design area" comprised
of the four most hydraulically de-
manding sprinklers for the actual
coverage areas being protected by
the four sprinklers.
Obstruction To Water Distribution.
Locations of sprinklers are to be in
accordance with the obstruction rules
of NFPA 13 for residential sprinklers.
Operational Sensitivity.
• For "Horizontal Ceilings" (maximum
2 inch rise for 12 inch run), the sprin-
klers are to be installed with a deflec-
tor to ceiling distance of 1 -3/8 to 4
inches or in the recessed position
using only the Style 20 Recessed
Escutcheon as shown in Figure 2.
NOTES
The "Beam Ceiling Design Criteria"
section starting on Page 4 permits de-
flector to ceiling distances up to 15 -3/4
inches.
So as to help avoid obstructions to
water distribution, a maximum 12 inch
deflector -to- ceiling distance is permit-
ted for NFPA 13D and NFPA 13R appli-
cations where the sprinklers are located
in closets.
• For "Sloped Ceilings" (greater than
2 inch rise up to 8 inch rise for 12
inch run), the sprinklers are to be
installed with a deflector to ceiling
• •
•
•
•
•
•
•
•
• •
•
•
Maximum
Coverage
Area (a)
Ft. x Ft.
(m x m)
Maximum
Spacing
Ft.
(m)
Minimum Flow ib) and
Residual Pressure
For Horizontal Ceiling
(Max. 2 Inch Rise
for 12 Inch Run)
Minimum Flow OS and
Residual Pressure
For Sloped Ceiling
(Greater Than 2 Inch Rise
Up To Max. 4 Inch Rise for 12 Inch Run)
Minimum Flow (b) and
Residual Pressure
For Sloped Ceiling
(Greater Than 4 Inch Rise
Up To Max. 8 Inch Rise for 12 Inch Run)
155 °F /68 °C or
175F/79°C
155 °F /68 °C
175 °F /79 °C
155 °F /68 °C
175FI79°C
12 x 12
(3,7 x 3,7)
12
(3,7)
13 GPM (49,2 LPM)
7.0 psi (0,48 bar)
13 GPM (49,2 LPM)
7.0 psi (0,48 bar)
17 GPM (64,3 LPM)
12.0 psi (0,83 bar)
13 GPM (49,2 LPM)
7.0 psi (0,48 bar)
18 GPM (68,1 LPM)
13.5 psi (0,93 bar)
14 x 14
(4,3 x 4,3)
14
(4,3)
13 GPM (49,2 LPM)
7.0 psi (0,48 bar)
13 GPM (49,2 LPM)
7.0 psi (0,48 bar)
17 GPM (64,3 LPM)
12.0 psi (0,83 bar)
13 GPM (49,2 LPM)
7.0 psi (0,48 bar)
18 GPM (68,1 LPM)
13.5 psi (0,93 bar)
16 x 16
(4,9 x 4,9)
16
(4,9)
13 GPM (49,2 LPM)
7.0 psi (0,48 bar)
13 GPM (49,2 LPM)
7.0 psi (0,48 bar)
17 GPM (64,3 LPM)
12.0 psi (0,83 bar)
13 GPM (49,2 LPM)
7.0 psi (0,48par)
18 GPM %?1'1
• 13.5 psil0,93 bar)
18 x 18
(5,5 x 5,5)
18
(5,5)
17 GPM (64,3 LPM)
12.0 psi (0,83 bar)
17 GPM (64,3 LPM)
12.0 psi (0,83 bar)
17 GPM (64,3 LPM)
12.0 psi (0,83 bar)
17 GPM (64,3 L v1)
12.0 psi (0,83E94
• 3 GIN x87 •IrM)
•22.0 psift,52 bar)
20 x 20
(6,1 x 6,1)
20
(6,1)
20 GPM (75,7 LPM)
16.7 psi (1,15 bar)
20 GPM (75,7 LPM)
16.7 psi (1,15 bar)
20 GPM (75,7 LPM)
16.7 psi (1,15 bar)
21 GPM (79,5•L4'M)
18.4 psi (1,27 bar)
• N/A•
• • • _
• (a) For coverage area dimensions less than or between those indicated, it is necessary to use the minima ed • flow fool I • next
highest coverage area for which hydraulic design criteria are stated. • • • • •
•• •• •• •
(b) Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual piassbrea are calculated
using the nominal K- factor. Refer to Hydraulic Design Criteria Section for details. •
• • • • • • •
TABLE A • • •••• •
NFPA 13D AND NFPA 13R HYDRAULIC DESIGN CRITERIA FOR THE SERIES LW0V2234) . ...
RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS • • • • •
Page 2 of 8
Technical
Data
Approvals:
UL and C -UL Listed. NYC Approved
under MEA 44 -03 -E.
Maximum Working Pressure:
175 psi (12,1 bar)
Discharge Coefficient:
K = 4.9 GPM/psilr (70,6 LPM/barli
Temperature Rating:
155 °F /68 °C or 175 °F /79 °C
Finishes:
White Polyester Coated,
Chrome Plated, or Natural Brass
Physical Characteristics:
Frame Brass
Button Bronze
Sealing Assembly
Beryllium Nickel w/Teflont
Bulb 3 mm dia. Glass
Compression Screw Bronze
Deflector Bronze
Ejection Spring .... Stainless Steel
tDuPont Registered Trademark
Operation
The glass Bulb contains a fluid that
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb allowing the sprinkler to
activate and flow water.
Design
Criteria
The Series LFII (TY2234) Residential
Pendent Sprinklers are UL and C -UL
Listed for installation in accordance
with the following criteria.
NOTE
When conditions exist that are outside
the scope of the provided criteria, refer
to the Residential Sprinkler Design
Guide TFP490 for the manufacturer's
recommendations that may be accept-
able to the local Authority having Juris-
diction.
System Type. Only wet pipe systems
may be utilized.
Hydraulic Design. The minimum re-
quired sprinkler flow rate for systems
designed to NFPA 13D or NFPA 13R
are given in Table A as a function of
temperature rating and the maximum
allowable coverage areas. The sprin-
kler flow rate is the minimum required
discharge from each of the total
number of "design sprinklers" as speci-
fied in NFPA 13D or NFPA 13R.
For systems designed to NFPA 13, the
number of design sprinklers is to be
the four most hydraulically demanding
sprinklers. The minimum required dis-
charge from each of the four sprinklers
is to be the greater of the following:
• The flow rates given in Table A for
NFPA 13D and 13R as a function of
TFP400
temperature rating and the maxi-
mum allowable coverage area.
• A minimum discharge of 0.1 gpm /sq.
ft. over the "design area" comprised
of the four most hydraulically de-
manding sprinklers for the actual
coverage areas being protected by
the four sprinklers.
Obstruction To Water Distribution.
Locations of sprinklers are to be in
accordance with the obstruction rules
of NFPA 13 for residential sprinklers.
Operational Sensitivity.
• For "Horizontal Ceilings" (maximum
2 inch rise for 12 inch run), the sprin-
klers are to be installed with a deflec-
tor to ceiling distance of 1 -3/8 to 4
inches or in the recessed position
using only the Style 20 Recessed
Escutcheon as shown in Figure 2.
NOTES
The "Beam Ceiling Design Criteria"
section starting on Page 4 permits de-
flector to ceiling distances up to 15 -3/4
inches.
So as to help avoid obstructions to
water distribution, a maximum 12 inch
deflector -to- ceiling distance is permit-
ted for NFPA 13D and NFPA 13R appli-
cations where the sprinklers are located
in closets.
• For "Sloped Ceilings" (greater than
2 inch rise up to 8 inch rise for 12
inch run), the sprinklers are to be
installed with a deflector to ceiling
• •
•
•
•
•
•
•
•
• •
•
•
TFP400
Components:
1 - Frame
2 - Button
3 - Sealing Assembly
4 - Bulb
5 - Compression
Screw
6 - Deflector *
* Temperature
rating is
indicated on
Deflector.
7/16° (11,1 mm)
NOMINAL
MAKE -IN
1/2°
NPT
CROSS SECTION PENDENT
ESCUTCHEON
PLATE SEATING
SURFACE
WRENCH
FLATS
FIGURE 1
SERIES LFII (TY2234) RESIDENTIAL
PENDENT AND RECESSED PENDENT SPRINKLERS
2 -7/8° DIA.
(73,0 mm)
•• • • •••
RECE fl T'ENDENY •
•• •
• •••• • • • •
•••• • ••
• • • • •
•• •• •• •
• • •
• •
STYLE 20
RECESSED
€,CPJTCHEON
••••
•
••••
7/16±1/8"
(11,1±3,2 mm)
FACE OF
SPRINKLER
FITTING
MOUNTING
SURFACE
CLOSURE TY2234
2 -7/8° DIA.
(73,0 mm)
2 -1/4" DIA.
(57,2 mm)
1/2 °(12,7 mm)
1/4° (6,4 mm)
MOUNTING
PLATE
1 /8°
(3,2 mm)
1 -3/8° (34,9 mm)
1 -1 /8° (28,6 mm)
FIGURE 2
STYLE 20 RECESSED ESCUTCHEON
FOR USE WITH THE SERIES LFII (TY2234)
RESIDENTIAL PENDENT SPRINKLER
distance of 1 -3/8 to 4 inches or in
the recessed position using only the
Style 20 Recessed Escutcheon as
shown in Figure 2
Sprinkler Spacing. The minimum
spacing between sprinklers is 8 feet
(2,4 m). The maximum spacing be-
tween sprinklers cannot exceed the
length of the coverage area (Ref. Table
A) being hydraulically calculated (e.g.,
maximum 12 feet for a 12 ft. x 12 ft.
coverage area, or 20 feet for a 20 ft. x
20 ft. coverage area).
Page 3 of 8
. • •
• ...•
• •••
• • •
•• •
WRENCH RECESS
(END °A° USED
FOR TY2234)
WRENCH
RECESS
PUSH WRENCH
IN TO ENSURE
ENGAGEMENT
WITH SPRINKLER
WRENCHING AREA
FIGURE 4
W -TYPE 7 RECESSED
SPRINKLER WRENCH
1
•
•
1••••
• •
1••••
•
•
•
•
•
•
•
• •
•
Page 4 of 8
Beam Ceiling
Design Criteria
The Series LFII (TY2234) Residential
Pendent Sprinklers are UL and C -UL
Listed for installation in residential oc-
cupancies with horizontal ceilings (i.e.,
slopes up to a 2 inch rise over a 12 inch
run) with beams when installed in ac-
cordance with the following criteria:
General Information. The basic con-
cept of this protection scheme is to
locate the sprinklers on the underside
of the beams, Ref. Figure 5, (not in the
beam pockets); to identify the main
beams that principally run in one direc-
tion as "primary beams "; and, to iden-
tify the beams that run principally per-
pendicular to the main beams, as may
be present (or in some cases may be
necessary for proper sprinkler protec-
tion), as "secondary beams ".
Primary and Secondary Beam
Types. Solid surface, solid or hollow
core, combustible or non - combustible.
Primary and Secondary Beam Posi-
tioning. Directly attached to the un-
derside of a combustible or non -com-
bustible smooth ceiling at any
elevation.
Primary Beam Cross - Section: Maxi-
mum depth of 14 inches and the maxi-
mum width is unlimited. The cross -sec-
tional shape of the primary beam may
be rectangular to circular.
Secondary Beam Cross - Section.
Maximum depth to be no greater than
the primary beam and the maximum
width is unlimited. The cross - sectional
shape of the secondary beam may be
rectangular to circular.
Primary Beam Spacing. The primary
beams (Fig. 6A) are to be 3 ft. - 4 in. to
6 ft. from the compartment wall to cen-
ter of the nearest beam and from cen-
ter to center between beams.
Secondary Beam Spacing. The sec-
ondary beams principally run perpen-
dicular to the primary beams.
Secondary beams of a depth equal to
the primary beam must be placed so
that the beam pockets created by the
primary beams do not exceed 20 feet
in length (Fig. 6B).
NOTE
When the beam pockets created by
the primary beams exceed 20 feet in
length, the installation will require the
use of secondary beams as described
above. Otherwise, secondary beams
need not be present.
Secondary beams of a cross - sectional
depth greater than one - quarter the
depth of the primary beams are to be
a minimum of 3 ft. - 4 in. from the
compartment wall to center of the
nearest beam and from center to cen-
ter between beams (Fig. 6C).
Secondary beams of a cross - sectional
depth no greater than one - quarter the
depth of the primary beams may be
placed at any compartment wall to
center of the nearest beam distance
and from any center to center distance
between beams (Fig. 6C).
Lintels. Lintels over doorways exiting
the compartment must be present. The
minimum height for the lintels is 8
inches or no less than the depth of the
Primary Beams, whichever is greater.
Sprinkler Types. Series LFII
(TY2234), 155F and 175F, Pendent
and Recessed Pendent Residential
Sprinklers.
Sprinkler Coverage Area and Hy-
draulic Design. The sprinkler cover-
age areas and hydraulic design criteria
as presented in the Table A for "Hori-
zontal Ceilings" are to be applied.
Sprinkler Position. The deflector to
bottom of primary beams for the Series
LFII (TY2234) Pendent Sprinklers or
Series LFII (TY2234) Recessed Pen-
dent Sprinklers is to be 1 -1/4 to 1 -3/4
inches (Fig. 5A). The vertical center-
line of the Series LFII (TY2234) Pen-
dent Sprinklers is to be no greater than
half the primary beam cross - sectional
width plus 2 inches from the centerline
of the primary beam (Fig 5B).
NOTES
Core drilling of beams to allow the in-
stallation of sprinkler drops requires
consulting with a structural engineer.
Where core drilling is not permitted,
the previously stated sprinkler position
criteria for the Series LFII (TY2234)
Pendent Sprinklers allows for the
sprinkler drop to be placed adjacent to
the primary beam.
Beam and Soffit Arrangements. A
soffit is permitted to be placed around
the perimeter of a compartment with
the beam arrangement within the sof-
fited area (Fig.7).
The cross - section of the soffit may be
any size as long as it does not create
an obstruction to water distribution per
the obstruction rules of NFPA 13 for
residential sprinklers.
When soffits are present, the pre-
viously provided 3 ft. - 4 in. to 6 ft.
"compartment wall to adjacent beam"
distance for the primary and secon-
dary beams is to be measured from the
face of the soffit as opposed to the
compartment wall.
TFP400
A
B
E
E
t
.. •
MAXIMUM
ONE -HALF BEAM
WIDTH PLUS
2° (50,8 mm)
• •
• • ••••
• • .
s v 'sr
•
•
TY2234
FIGURE 5
SPRINKLER POSITIONING
UNDER PRIMARY BEAMS
(Refer to the "Beam Ceiling
Design Criteria" section)
NOTE
Although the distance to the beams is
measured from the face of the soffit,
the sprinkler coverage area is to be
measured from the compartment wall.
•
..
• •
•.••
• •
•
•
•
•
•
•
TFP400
Page 5 of 8
ALL FIGURES:
DISTANCES ARE
MEASURED TO
COMPARTMENT
WALL FACES AND
TO CENTERLINES
OF BEAMS
*REFER TO
FIGURE 6B
FOR SPANS
EXCEEDING
20' -0° (6,1 m)
PRIMARY
BEAM
COMPARTMENT
WALLS
SECONDARY
BEAM
PRIMARY *
BEAM
COMPARTMENT
WALLS
A= 3'- 4 °to6-0°(1,0to1,8m)
FOR PRIMARY BEAMS HAV-
ING A 14° (356 mm) MAXIMUM
DEPTH
20'-0° (6,1 m)
MAXI MUM
• _
• • • • •••• •
•• •
FIGURE 6A
PRIMARY BEAM SPANS UP TO 20' -0° (6,1 m)
FIGURE 6B
PRIMARY BEAM SPANS GREATER THAN 20' -0° (6,1 m)
FIGURE 6C
COMBINATIONS OF PRIMARY AND SECONDARY BEAMS
14° (356 mm)
MAXIMUM
FIGURE 6
BEAM ARRANGEMENTS
(Refer to the "Beam Ceiling Design Criteria" section)
•
• •
• • • •
••••
• • • • •
•• •• •• •
A =3'-4° DOM MO •
FOR PRIMARY B MS HAV-
ING A 14° (356 mm) MAXIM& I • • •
• •
DEPTH • • • ••••
B = 20'-0° (6,1 m) R1AXIMUY • • • •
FOR SECONDARY BEAMS • • • •
THAT ARE TO BE EQUAL IN
DEPTH TO PRIMARY BEAMS
AND THAT MUST BE IN PLACE
SO THAT PRIMARY BEAM
POCKETS DO NOT EXCEED
20' -0° (6,1 m)
A.: 3'-4° to 6-0° (1,0 to 1,8 m)
FOR PRIMARY BEAMS HAV-
ING A 14° (356 mm) MAXIMUM
DEPTH
C = 3'-4° (1,0 m) MINIMUM FOR
SECONDARY BEAMS HAVING
DEPTHS GREATER THAN 25%
OF PRIMARY BEAMS
— or—
C = ANY DISTANCE FOR SEC-
ONDARY BEAMS HAVING
DEPTHS UP TO 25% OF
PRIMARY BEAMS
• •••
• • •
•• •
•
•• •
• • •
• ••
•
•
•
•
••
•
• •
• •
•
•
•
•
•
•
Page 6 of 8
SECONDARY
BEAM
PRIMARY
BEAM
FACE OF
SOFFIT
COMPARTMENT
WALLS
FIGURE 7
BEAM AND SOFFIT ARRANGEMENTS
(Refer to the "Beam Ceiling Design Criteria" section)
* USE DISTANCES SHOWN
IN FIGURES 6A, 6B & 6C,
EXCEPT MEASUREMENTS
ARE TAKEN FROM FACES
OF SOFFITS INSTEAD OF
FROM COMPARTMENT
WALL SURFACES
• •
• • •
• • •
•
•• ••
• •
••••
• •
•• ••
• • •
• •
• •
• • •
-•
• • ••
• •
•
• •••
• • •
•• •
•
•• •
• • •
• ••
••••
• • •
•• •
•
•••• •
• •
•••• •
•
Installation
The Series LFII (TY2234) must be in-
stalled in accordance with the follow-
ing instructions:
NOTES
Do not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1/16 inch
(1,6 mm).
A leak tight 1/2 inch NPTsprinkler joint
should be obtained with a torque of 7
to 14 ft.lbs. (9,5 to 19,0 Nm). A maxi-
mum of 21 ft.lbs. (28,5 Nm) of torque
is to be used to install sprinklers.
Higher levels of torque may distort the
sprinkler inlet with consequent leak-
age or impairment of the sprinkler.
Do not attempt to compensate for in-
sufficient adjustment in an Escutcheon
Plate by under- or over - tightening the
Sprinkler. Readjust the position of the
sprinkler fitting to suit.
The Series LFII Pendent Sprinklers
must be installed in accordance with
the following instructions.
Step 1. Pendent sprinklers are to be
installed in the pendent position with
the deflector parallel to the ceiling.
Step 2. With pipe thread sealant ap-
plied to the pipe threads, hand tighten
the sprinkler into the sprinkler fitting.
Step 3. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
6 Sprinkler Wrench (Ref. Figure 3).
With reference to Figure 1, the W -Type
6 Sprinkler Wrench is to be applied to
the wrench flats.
The Series LFII Recessed Pendent
Sprinklers must be installed in ac-
cordance with the following instruc-
tions.
Step A. Recessed pendent sprinklers
are to be installed in the pendent posi-
tion with the deflector parallel to the
ceiling.
Step B. After installing the Style 20
Mounting Plate over the sprinkler
threads and with pipe thread sealant
applied to the pipe threads, hand
tighten the sprinkler into the sprinkler
fitting.
Step C. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
7 Recessed Sprinkler Wrench (Ref.
Figure 4). With reference to Figure 1,
the W -Type 7 Recessed Sprinkler
Wrench is to be applied to the sprinkler
wrench flats.
Step D. After the ceiling has been in-
stalled or the finish coat has been ap-
plied, slide on the Style 20 Closure
over the Series LFII Sprinkler and
push the Closure over the Mounting
Plate until its flange comes in contact
with the ceiling.
• •••
• • •
•• •
Care and
Maintenance
TFP400
•
The Series LFII (TY2234) must be
maintained and serviced in accord-
ance with the following instructions:
•
•
•
NOTES
Absence of an Escutcheon Plate may
delay the sprinkler operation in a fire
situation.
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system
which it controls, permission to shut
down the affected fire protection sys-
tem must be obtained from the proper
authorities and all personnel who may
be affected by this action must be no-
tified.
Sprinklers which are found to be leak-
ing or exhibiting visible signs of corro-
sion must be replaced.
Automatic sprinklers must never be
painted, plated, coated, or otherwise
altered after leaving the factory. Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
•
•
•
• •
•
•
•
•
•
•
•
TFP400 Page 7 of 8
age to the sprinklers - before, during,
and after installation. Sprinklers dam-
aged by dropping, striking, wrench
twist/slippage, or the like, must be re-
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb. (Ref. Installation
Section).
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative to
any questions.
NOTE
The owner must assure that the sprin-
klers are not used for hanging of any
objects and that the sprinklers are only
cleaned by means of gently dusting
with a feather duster; otherwise, non -
operation in the event of a fire or inad-
vertent operation may result.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service in accordance with
local requirements and /or national
codes.
Limited
Warranty
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro-
sion, or which have not been installed,
maintained, modified or repaired in ac-
cordance with applicable Standards of
the National Fire Protection Associa-
tion, and/or the standards of any other
Authorities Having Jurisdiction. Mate-
rials found by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Fire Products' sole
option. Tyco Fire Products neither as-
sumes, nor authorizes any person to
assume for it, any other obligation in
connection with the sale of products or
parts of products. Tyco Fire Products
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, INDIRECT,
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS' LI-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY IS
MADE IN LIEU OF ANY AND ALL,
OTHER WARRANTIES EXPRESS OR
IMPLIED. INCLUDING WARRANTIES
OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PUR-
POSE,.
Ordering
Procedure
When placing an order, indicate the full
product name. Contact your local dis-
tributor for availability..
Sprinkler Assembly:
Series LFII (TY2234), K =4.9, Residen-
tial Pendent Sprinkler with (specify)
temperature rating and (specify) finish,
P/N (specify).
155'F/68°C or
Chrome Plated P g1!2b, -9 -155
155 °F /68 °C • • • • • •
White Polyesyeg! . 51iiO -155
155 °F /68 °C • • •
White • • •
(RAL9010)b •.•..• • P/N 51201 -3-155 •
Natural Brig • • • • IrI! i 5 1- Lt:1 -1 -155 •
175 °F /79 °C or • • • • • • •
Chrome Plat • w •.... • P/N i i 201 -9 -175
175 °F /79 °C • • •
White Polyti9ters •
175 °F /79 °C
White • • •
(RAL9O10) •
175 °F /79 °C • •
Natural Brass..• ..• ..... PJR1 • 54-'01 -1 -175•' •
•• • • ••• • •
*Eastern Hemisphere sales viLy.
Recessed Escutcheon:
Specify: Style 20 Recessed Escutch-
eon with (specify) finish, P/N (specify).
1/2° (15 mm)
Style 20
Chrome Plated P/N 56 -705 -9 -010
1/2° (15 mm)
Style 20
White Color
Coated P/N 56- 705 -4-010
1/2' (15 mm)
Style 20
White
(RAL9010)* P/N 56- 705 -3-010
1/2° (15 mm)
Style 20
Bright Brass
Coated P/N 56 -705 -2 -010
*Eastern Hemisphere sales only.
1 -4-175
•
P/61464. 01- 3-175•
• •
Sprinkler Wrench:
Specify: W -Type 6 Sprinkler Wrench,
P/N 56- 000 -6 -387.
Specify: W -Type 7 Sprinkler Wrench,
P/N 56- 850 -4 -001.
•
•
•
•
•
• •
•
•
•
Page 8 of 8 TFP400
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
• •
• • •
•• •
•
••••
• •
•• ••
.. • • •
•
••••
• •••
• • •
•• •
••• •
• • •
•
•
•
•
•
• • •
•• •
• • •
• ••
• •
• •
•
•
•
• • •
• • •
• •
• • •••• • •
• • •
•• • • ••• • •
• • •
tqcci I Fire &Building
Products
Technical Services: Tel: (800) 381 -9312 / Fax: (800) 791 -5500
Series LFII Residential
Horizontal Sidewall Sprinklers
4.2 K- factor
General
Description
The Series LFII (TY1334) Residential
Horizontal Sidewall Sprinklers are
decorative, fast response, frangible
bulb sprinklers designed for use in
residential occupancies such as
homes, apartments, dormitories, and
hotels. When aesthetics and optimized
flow characteristics are the major con-
sideration, the Series LFII (TY1334)
should be the first choice.
The Series LFII are to be used in wet
pipe residential sprinkler systems for
one- and two- family dwellings and mo-
bile homes per NFPA 13D; wet pipe
residential sprinkler systems for resi-
dential occupancies up to and includ-
ing four stories in height per NFPA
13R; or, wet pipe sprinkler systems for
the residential portions of any occu-
pancy per NFPA 13.
The Series LFII (TY1334) has a 4.2
(60,5) K- factor that provides the re-
quired residential flow rates at reduced
pressures, enabling smaller pipe sizes
and water supply requirements.
The recessed version of the Series
LFII (TY1334) is intended for use in
areas with finished walls. It employs a
two -piece Style 20 Recessed Escutch-
eon. The Recessed Escutcheon pro-
vides 1/4 inch (6,4 mm) of recessed
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the "INSTALLER
WARNING" that provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. Improper handling and in-
stallation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
Page 1 of 8
adjustment or up to 1/2 inch (12,7 mm)
of total adjustment from the flush
mounting surface position. The adjust-
ment provided by the Recessed Es-
cutcheon reduces the accuracy to
which the pipe nipples to the sprinklers
must be cut.
The Series LFII (TY1334) has been
designed with heat sensitivity and
water distribution characteristics
proven to help in the control of residen-
tial fires and to improve the chance for
occupants to escape or be evacuated.
WARNINGS
The Series LFII (TY1334) Residential
Horizontal Sidewall Sprinklers de-
scribed herein must be installed and
maintained in compliance with this
document, as well as with the applica-
ble standards of the National Fire Pro-
tection Association, in addition to the
standards of any other authorities hav-
ing jurisdiction. Failure to do so may
Impair the performance of these de-
vices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.
Sprinkler/Model
Identification
Number
SIN TY1334
APRIL, 2004 TFP41O
.�
.�
•
•
•
....
• •
....
•
•
Page 2 of 8
TFP41O
Components:
1 - Frame
2 - Button Assembly
3 - Sealing Assembly
4 - Bulb
5 - Compression Screw
6 - Deflector
* Temperature rating
is indicated on top
of Deflector.
7/16°
(11,1 mm)
END-OF-
DEFLECTOR
BOSS
ArreeN11111
TOP -OF-
DEFLECTOR
1 -5/8°
(41,3 mm)
2 -1/4°
(57,2 mm)
7/16° (11,1 mm)
H- NOMINAL
MAKE -IN
CENTERLINE
OF WATERWAY
ESCUTCHEON
PLATE SEATING
SURFACE
I
7;1 ! ��
STYLE 20
WRENCH
FLATS
1/2° NPT RECESSED
ESCUTCHEON
• •
• • • ••••
•
•RRc ESSED •••
• •
•• •
•
•• •
•
•• •
• ••••
FIGURE 1
SERIES LFII (TY1334) RESIDENTIAL
HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRMN LE ?S
•• ••
• • •
• ••
••••
• • •
•• •
2 -7/8° DIA.
(73,0 mm)
•
TOP -OF- CLOSURE
DEFLECTOR
a\
7/16°
(11,1 mm)
MOUNTING
PLATE
END -OF-
DEFLECTOR
BOSS
1-3/8" (34,9 mm)
1 -1/8° (28,6 mm)
MOUNTING
SURFACE
7/1611/8°
(11,1 ±3,2 mm)
FACE OF
SPRINKLER
FITTING
1/8°
(3,2 mm)
1/2° (12,7 mm)
1/4° (6,4 mm)
2 -7/8 DIA.
(73,0 mm)
2 -1/4 DIA.
(57,2 mm)
FIGURE 2
STYLE 20 RECESSED ESCUTCHEON
FOR USE WITH THE SERIES LFII (TY1334)
RESIDENTIAL HORIZONTAL SIDEWALL SPRINKLER
•
•••• •
• •
•
WREDICH DECESS •
(END°A° USED
FOR TY1334)
WRENCH
RECESS
PUSH WRENCH
IN TO ENSURE
ENGAGEMENT
WITH SPRINKLER
WRENCHING AREA
FIGURE 4
W -TYPE 7 RECESSED
SPRINKLER WRENCH
•
• •
•
. •
•
•
••••
• •
••
•
•
TFP410 Page 3 of 8
Technical
Data
Approvals:
UL and C -UL Listed. NYC Approved
under MEA 44 -03 -E.
Maximum Working Pressure:
175 psi (12,1 bar)
Discharge Coefficient:
K = 4.2 GPM/psi (60,5 LPM/bar /
Temperature Rating:
155 °F /68 °C or 175 °F /79 °C
Finishes:
White Polyester Coated,
Chrome Plated, or Natural Brass
Physical Characteristics:
Frame Brass
Button Bronze
Sealing Assembly
Beryllium Nickel w/Teflont
Bulb 3 mm dia. Glass
Compression Screw Bronze
Deflector Copper
tDupont Registered Trademark
Operation
The glass Bulb contains a fluid that
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb allowing the sprinkler to
activate and flow water.
Design
Criteria
The Series LFII (TY1334) Residential
Horizontal Sidewall Sprinklers are UL
and C -UL Listed for installation in ac-
cordance with the following criteria.
NOTE
When conditions exist that are outside
the scope of the provided criteria, refer
to the Residential Sprinkler Design
Guide TFP490 for the manufacturer's
recommendations that may be accept-
able to the local Authority Having Ju-
risdiction.
System Type. Only wet pipe systems
may be utilized.
Hydraulic Design. The minimum re-
quired sprinkler flow rate for systems
designed to NFPA 13D or NFPA 13R
are given in Table A, B, C, and D as a
function of temperature rating and the
maximum allowable coverage areas.
The sprinkler flow rate is the minimum
required discharge from each of the
total number of "design sprinklers" as
specified in NFPA 13D or NFPA 13R.
For systems designed to NFPA 13, the
number of design sprinklers is to be
the four most hydraulically demanding
sprinklers. The minimum required dis-
charge from each of the four sprinklers
is to be the greater of the following:
• The flow rates given in Tables A, B,
C, and D for NFPA 13D and 13R as
a function of temperature rating and
the maximum allowable coverage
area.
• A minimum discharge of 0.1 gpm /sq.
ft. over the "design area" comprised
of the four most hydraulically de-
manding sprinklers for the actual
coverage areas being protected by
the four sprinklers.
Obstruction To Water Distribution.
Locations of sprinklers are to be in
accordance with the obstruction rules
of NFPA 13 for residential sprinklers.
Operational Sensitivity. The sprin-
klers are to be installed with an end -of-
deflector -boss to wall distance of 1-
3/8 to 6 inches or in the recessed po-
sition using only the Style 20 Re-
cessed Escutcheon as shown in
Figure 2.
In addition the top-of- deflector -to -ceil-
ing distance is to be within the range
(Ref. Table A, B, C, or D) being hydrau-
lically calculated.
Sprinkler Spacing. The minimum
spacing between sprinklers is 8 feet
(2,4 m). The maximum spacing be-
tween sprinklers cannot exceed the
width of the coverage area (Ref. Table
A) being hydraulically calculated (e.g.,
maximum 12 feet for a 12 ft. x 12 ft.
coverage area, or 16 feet for a 16 ft. x
20 ft. coverage area).
Installation
The Series LFII (TY1334) must be in-
stalled in accordance with the follow-
ing instructions:
NOTES
Do not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1/16 inch
(1,6 mm).
A leak tight 1/2 inch NPT sprinkler joint
should be obtained with a torque of 7
to 14 ft.lbs. (9,5 to 19,0 Nm). A maxi-
mum of 21 ft.lbs. (28,5 Nm) of torque
is to be used to install sprinklers.
Higher levels of torque may distort the
sprinkler inlet with consequent leak-
age or impairment of the sprinkler.
Do not attempt to compensate for in-
sufficient adjustment in an Escutcheon
Plate by under- or over - tightening the
Sprinkler. Readjust the position of the
sprinkler fitting to suit.
The Series LFII Horizontal Sidewall
Sprinklers must be installed in ac-
cordance with the following instruc-
tions.
Step 1. Horizontal sidewall sprinklers
are to be installed in the horizontal
position with their centerline of water-
way perpendicular to the back wall and
parallel to the ceiling. The word "TOP"
on the Deflector is to facG>;c» ards the
ceiling wit the front et %9L the De-
flector pailleI•to.he ceiling �•
•
Step 2. Wii,11, pipe thread stattnt ap-
plied to th igag threads, h qrpd tighter
the sprinkler jr2t2 the sprin kre; fitting. •
Step 3. T?gagg the spCinitlin fhto thg • •,
sprinkler fjttio�qq onlylhe W -Type •
6 Sprinkler 7ivrer ch (Ref. figure 3).
With refergficefo Figure 1,'the1N- Typ8 •
6 SprinkletAN h is to be•applied to ••
the wrencin flas.. ••••
The Serie$ LFrI ecessdtrflbrizont4
Sidewall Sprinklers mget be installed
in accordance with the•foflowing in-
structions.
Step A. Recessed horizontal sidewall
sprinklers are to be installed in the
horizontal position with their centerline
of waterway perpendicular to the back
wall and parallel to the ceiling. The
word "TOP" on the Deflector is to face
towards the ceiling.
Step B. After installing the Style 20
Mounting Plate over the sprinkler
threads and with pipe thread sealant
applied to the pipe threads, hand
tighten the sprinkler into the sprinkler
fitting.
Step C. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
7 Recessed Sprinkler Wrench (Ref.
Figure 4). With reference to Figure 1,
the W -Type 7 Recessed Sprinkler
Wrench is to be applied to the sprinkler
wrench flats.
Step C. After the wall has been in-
stalled or the finish coat has been ap-
plied, slide on the Style 20 Closure
over the Series LFII Sprinkler and
push the Closure over the Mounting
Plate until its flange comes in contact
with the wall.
(Continued on Page 8)
•
•
•
•
•
•
Page 4 of 8
TFP410
ELEVATION
••••
Maximum
Coverage
Area (a)
Width x Length 04
Ft. x Ft.
(m x m)
12 x 12
(3,7 x 3,7)
14 x 14
(4,3 x 4,3)
16 x 16
(4,9 x 4,9)
16 x 18
(4,9 x 5,5)
16 x 20
(4,9 x 6,1)
Maximum
Spacing
Ft.
(m)
12
(3,7)
14
(4,3)
16
(
16
(4,9)
16
(4,9)
• ••••
• • •
Minimum Flow (c) and Residual Pressure• • •
• •• •
• • •
Top-Of-Deflector- To- Ceiling:
4 to 6 Inches (100 to 150 mm)
155 °F /68 °C
12 GPM (45,4 LPM)
8.2 psi (0,57 bar)
14 GPM (53,0 LPM)
11.1 psi (0,77 bar)
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
19 GPM (71,9 LPM)
20.5 psi (1,41 bar)
23 GPM (87,1 LPM)
30.0 psi (2,07 bar)
175FF79°C
12 GPM (45,4 LPM)
8.2 psi (0,57 bar)
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
19 GPM (71,9 LPM)
20.5 psi (1,41 bar)
23 GPM (87,1 LPM)
30.0 psi (2,07 bar)
Top- Of- Deilqcarr To- Ceiling:.
6 to 12 Inchea.QQ0 to 150m) •
• • • • •
• •
155 °F /68 °C • •
••
13 GPM (49,2 LP14).
9.6 psi (0,66 bai3
17 GPM (64,3 LPVI)
16.4 psi (1,13be) _
18 GPM (68,1 LPM)
18.4 psi (1,27 bar)
21 GPM (79,5 LPM)
25.0 psi (1,72 bar)
26 GPM (98,4 LPM)
38.3 psi (2,64 bar)
• • ••
• • 175° 9p
▪ • •• •
..1$ GPM (49,2.LPM)
• 9.6 psi (Q 66.bar)
.18 GPM t6,8.1.I.PM)
• X8.4 psi (1,27 bar)
18 GPM f68 + 1•LIV)
18.4 psi (1,27 bar)
21 GPM (79,5 LPM)
25.0 psi (1,72 bar)
26 GPM (98,4 LPM)
38.3 psi (2,64 bar)
(a) For coverage area dimensions less than or between those indicated, it is necessary to use the minimum required flow for the next
highest coverage area for which hydraulic design criteria are stated.
(b) Width (backwall where sprinkler is located) x Length (horizontal throw of sprinkler).
(c) Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using
the nominal K- factor. Refer to Hydraulic Design Criteria Section for details.
(d) Sidewall sprinklers, where installed under a ceiling with a slope greater than 0 inch rise for a 12 inch run to a slope up to 2 inch
rise for 12 inch run, must be located per one of the following:
• Locate the sprinklers at the high point of the slope and positioned to discharge down the slope.
• Locate the sprinklers along the slope and positioned to discharge across the slope.
TABLE A
NFPA 13D AND NFPA 13R HYDRAULIC DESIGN CRITERIA
FOR THE SERIES LFII (TY1334)
RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS
FOR HORIZONTAL CEILING (Maximum 2 Inch Rise for 12 Inch Run)
•
•
a
•
Maximum
Coverage
Area 41
Width x Length (b)
FL x Ft.
(m x m)
Maximum
Spacing
Ft.
(m)
• • ••••
• • •
Minimum Flow lc) and Residual Pressure • • • • • • •
• •
(I) Two sprinkler design with the sprinklers at the high point of the sidplB tiposItloneo •
to discharge down the slope. •
•••• • • •
•••••• • ••••
••••
•
Top -Of- Deflector- To- Ceiling:
4 to 6 Inches (100 to 150 mm)
Top-0f- Defle.Rort To- Ceilit4 • •
6 to 12 Incluroliftto 300 mm) • _
• •
155 °F /68 °C
175 °F /79 °C
155 °F /68 °C •
•,
• •
• • • 175 °F /H 1
• • •••
12 x 12
(3,7 x 3,7)
12
(3,7)
1
12 GPM (45,4 LPM)
8.2 psi (0,57 bar)
I
12 GPM (45,4 LPM)
82 psi (0,57 bar)
I
13 GPM (49,2 LPM)
9.6 psi (0,66 bar)
I
13 GPM '49,2 L°PM)
9.6 psi (0,66 bar)
14 x 14
(4,3 x 4,3)
14
(4,3)
I
14 GPM (53,0 LPM)
11.1 psi (0,77 bar)
I
14 GPM (53,0 LPM)
11.1 psi (0,77 bar)
I
17 GPM (64.3 LPM)
16.4 psi (1,13 bar)
1
17 GPM (64.3 LPM)
16.4 psi (1,13 bar)
16 x 16
(4,9 x 4,9)
16
(4,9)
1
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
1
` 16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
I
18 GPM (68,1 LPM)
18.4 psi (1,27 bar)
1
18 GPM (68,1 LPM)
18.4 psi (1,27 bar)
16 x 18
(4,9 x 5,5)
16
(4,9)
I
19 GPM (71,9 LPM)
20.5 psi (1,41 bar)
I
19 GPM (71,9 LPM)
20.5 psi (1,41 bar)
I
21 GPM (79,5 LPM)
25.0 psi (1,72 bar)
I
21 GPM (79,5 LPM)
25.0 psi (1,72 bar)
16 x 20
(4,9 x 6,1)
16
(4,9)
1
24 GPM (90,8 LPM)
32.7 psi (2,25 bar)
I
24 GPM (90,8 LPM)
32.7 psi (2,25 bar)
I
26 GPM (98,4 LPM)
38.3 psi (2,64 bar)
1
26 GPM (98,4 LPM)
38.3 psi (2,64 bar)
TFP410
Page 5 of 8
12"
8" MAXIMUM
ELEVATION
•
(a) For coverage area dimensions Tess than or between those indicated, it is necessary to use the minimum required flow for the next
highest coverage area for which hydraulic design criteria are stated.
(b) Width (badman where sprinkler is located) x Length (horizontal throw of sprinkler).
(c) Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using
the nominal K- factor. Refer to Hydraulic Design Criteria Section for details..
TABLE B
NFPA 13D AND NFPA 13R HYDRAULIC DESIGN CRITERIA
FOR THE SERIES LFII (TY1334)
RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS
FOR SPRINKLERS AT THE HIGH POINT OF THE SLOPE AND DISCHARGING DOWN THE SLOPE
(Greater Than 2 Inch Rise for 12 Inch Run Up To 8 Inch Rise for 12 Inch Run)
•
•
•
•
•
1 ••••
• •
1•• ••
•�
•
•
Page 6 of 8
TFP410
ELEVATION
12"
4" MAXIMUM
•.••
• •
Maximum
Coverage
Area (e)
Width x Length (b)
(m x m)
Maximum
Spacing
Ft.
(m)
• • ••••
• • •
Minimum Flow (c) and Residual Pressure " • .' : •:
(II) Two sprinkler design with the sprinklers located along the slope ana'posiaoned to • '
discharge across the slope. •
(III) Three sprinkler design when there are more than two sprinklers )a II t6thpartme d• .
with the sprinklers located along the slope,and positioned to disctfa?Vacross t$ie slope.
••••
•
• • • •
Top -Of- Deflector- To- Ceiling:
4 to 6 Inches (100 to 150 mm)
. • • •
Top-Of- Deflector- fo- Ceiling:
6 to 12 Inchee (t40 300 mm) •
155 °F /68 °C
175 °F /79 °C
155 °F /68 °C • ..
• •
• ; 175 °F /i9 V ,
• • •
12 x 12
(3,7 x 3,7)
12
(3,7)
II
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
II
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
II
18 GPM (68,1 LPM)
18.4 psi (1,27 bar)
II
18 GPM r6 %,1 L1
18.4 psi (1,27 bar)
14 x 14
(4,3 x 4,3)
14
(4,3)
II
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
I1
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
II
18 GPM (68,1 LPM)
18.4 psi (1,27 bar)
11
18 GPM (68,1 LPM)
18.4 psi (1,27 bar)
16 x 16
(4,9 x 4,9)
16
(4,9)
11
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
II
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
i ll
18 GPM (68,1 LPM)
18.4 psi (1,27 bar)
II
18 GPM (68,1 LPM)
18.4 psi (1,27 bar)
16 x 18
(4,9 x 5,5)
16
(4,9)
II
22 GPM (83,3 LPM)
27.4 psi (1,89 bar)
II
22 GPM (83,3 LPM)
27.4 psi (1,89 bar)
11
22 GPM (83,3 LPM)
27.4 psi (1,89 bar)
II
22 GPM (83,3 LPM)
27.4 psi (1,89 bar)
16 x 20
(4,9 x 6,1)
16
(4,9)
III
23 GPM (87,1 LPM)
30.0 psi (2,07 bar)
III
23 GPM (87,1 LPM)
30.0 psi (2,07 bar)
III
26 GPM (98,4 LPM)
38.3 psi (2,64 bar)
III
26 GPM (98,4 LPM)
38.3 psi (2,64 bar)
(a) For coverage area dimensions Tess than or between those indicated, it is necessary to use the minimum required flow for the next
highest coverage area for which hydraulic design criteria are stated.
(b) Width (backwall where sprinkler is located) x Length (horizontal throw of sprinkler).
(c) Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using
the nominal K- factor. Refer to Hydraulic Design Criteria Section for details..
TABLE C
NFPA 13D AND NFPA 13R HYDRAULIC DESIGN CRITERIA
FOR THE SERIES LFII (TY1334)
RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL S/DEWALL SPRINKLERS
FOR SPRINKLERS LOCATED ALONG A SLOPE AND DISCHARGING ACROSS THE SLOPE
(Greater Than 2 Inch Rise for 12 Inch Run Up To 4 Inch Rise for 12 Inch Run)
Page 6 of 8
TFP410
TFP410
Page 7 of 8
•
•
•.••
• •
••••
•
•
•
•.
12"
8" MAXIMUM
••.•
- .
ELEVATION
Maximum
Coverage
Area (a)
Width x Length (bl
FLxFt.
(m x m)
Maximum
Spacing
Ft.
(m)
• • ••••
• • • •
Minimum Flow (c) and Residual Pressure • • • • • • •
(III) Three sprinkler design when there are more than two sprinklers 11113 tDfhpartment• lhd •
with the sprinklers located along the slope,and posifloned to dlsdtfftgOicross the slope.
•••• • • •
• • • • •
•••• • • •
••••
Top -Of- Deflector- To- Ceiling: • • • •
4 to 6 Inches (100 to 150 mm) • • •
155 °F /68 °C
• •
17J°F / °0 •
• • •
12 x 12
(3,7 x 3,7)
12
(3,7)
Ill
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
I11
16 GPM (60,6 LPM) •' •
14.5 psi (1,00 bar)
14 x 14
(4,3 x 4,3)
14
(4,3)
III
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
III
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
16 x 16
(4,9 x 4,9)
16
(4,9)
III
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
Ill
16 GPM (60,6 LPM)
14.5 psi (1,00 bar)
16x18
(4,9 x 5,5)
16
(4,9)
N/A
N/A
16 x 20
(4,9 x 6,1)
16
(4,9)
N/A
N/A
(a) For coverage area dimensions less than or between those indicated, it is necessary to use the minimum required flow for the next
highest coverage area for which hydraulic design criteria are stated.
(b) Width (backwall where sprinkler is located) x Length (horizontal throw of sprinkler).
(c) Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using
the nominal K- factor. Refer to Hydraulic Design Criteria Section for details..
TABLE D
NFPA 13D AND NFPA 13R HYDRAULIC DESIGN CRITERIA
FOR THE SERIES LFII (TY1334)
RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS
FOR SPRINKLERS LOCATED ALONG A SLOPE AND DISCHARGING ACROSS THE SLOPE
(Greater Than 4 Inch Rise for 12 Inch Run Up To 8 Inch Rise for 12 Inch Run)
TFP410
Page 7 of 8
•
•
•.••
• •
••••
•
•
•
•.
Page 8 of 8 TFP410
Care and
Maintenance
The Series LFII (TY1334) must be
maintained and serviced in accord-
ance with the following instructions:
NOTES
Absence of an Escutcheon Plate may
delay the sprinkler operation in a fire
situation.
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system
which it controls, permission to shut
down the affected fire protection sys-
tem must be obtained from the proper
authorities and all personnel who may
be affected by this action must be no-
tified.
Sprinklers which are found to be leak-
ing or exhibiting visible signs of corro-
sion must be replaced.
Automatic sprinklers must never be
painted, plated, coated, or otherwise
altered after leaving the factory. Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
age to the sprinklers - before, during,
and after installation. Sprinklers dam-
aged by dropping, striking, wrench
twist/slippage, or the like, must be re-
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb. (Ref. Installation
Section).
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative
to any questions.
NOTE
The owner must assure that the sprin-
klers are not used for hanging of any
objects and that the sprinklers are only
cleaned by means of gently dusting
with a feather duster; otherwise, non -
operation in the event of a fire or inad-
vertent operation may result.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service in accordance with
local requirements and /or national
codes.
Limited
Warranty
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro-
sion, or which have not been installed,
maintained, modified or repaired in ac-
cordance with applicable Standards of
the National Fire Protection Associa-
tion, and/or the standards of any other
Authorities Having Jurisdiction. Mate-
rials found by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Fire Products' sole
option. Tyco Fire Products neither as-
sumes, nor authorizes any person to
assume for it, any other obligation in
connection with the sale of products or
parts of products. Tyco Fire Products
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, INDIRECT,
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS' LI-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY IS
MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES EXPRESS OR
IMPLIED, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FIT-
.NESS FOR A PARTICULAR PUR-
POSE,
Ordering
Procedure
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
When placing an order, indicate the full
product name. Contact your local dis-
tributor for availability..
Sprinkler Assembly:
Series LFII (TY1334), K =4.2, Residen-
tial Horizontal Sidewall Sprinkler with
(specify) temperature rating and
(specify) finish, P/N (specify).
155 °F /68 °C or
Chrome Plated P/N 51- 211 -9 -155
155'F/68°C
White Polyester P/45-1 1 -4 -155
155 °F /68 °C • •
White • • ••••
(RAL9010) • P415j V -3 -155
155F/68°C • • •
Natural Bradt• • • • PR051 -2I1 -1 -155
175'F/79°C of • • •
Chrome Plated P/N 51- 211 -9 -175.
175 °F /79 °C • • • • • • • • •
White Polyester. . • 1/N'5442 ?1-4 -175
175'FT79°C
White ""
(RAL9010) a ..• • 4.51 -221 -3 -175•
175'F/79°C
Natural Brass... . • P/N 5�- 211 -1 -175
• ..••
*Eastern Hemisphere sales "qp y..'
• • •
Recessed Escutcheon :•�
Specify: Style 20 Recessed Escutch-
eon with (specify) finish, P/N (specify).
1/2° (15 mm)
Style 20
Chrome Plated P/N 56 -705 -9 -010
1/2° (15 mm)
Style 20
White Color
Coated P/N 56 -705 -4 -010
1/2° (15 mm)
Style 20
White
(RAL9010)' P/N 56- 705 -3-010
1/2° (15 mm)
Style 20
Bright Brass
Coated P/N 56 -705 -2 -010
*Eastern Hemisphere sales only.
Sprinkler Wrench:
Specify: W -Type 6 Sprinkler Wrench,
P/N 56- 000 -6 -387.
Specify: W -Type 7 Sprinkler Wrench,
P/N 56- 850 -4 -001.
•
•
•
•
• •
•�
•
•
tLICIJI Fire &Building
Products
Technical Services: Tel: (800) 381 -9312 / Fax: (800) 791 -5500
Aft
EEIVTRAL
Customer Service/Sales:
Tel: (215) 362 -0700 / (800) 523 -6512
Fax: (215) 362 -5385
Series TY SA, and 8 0 Kw
Upright, Pendent, and Recessed Pendent Sprinklers
Standard Response, Standard Coverage
General
Description
The Series TY-B, 2.8, 5.6, and 8.0
K- factor, Upright and Pendent Sprin-
klers described in this data sheet are
standard response - standard cover-
age, decorative 5 mm glass bulb type
spray sprinklers designed for use in
light, ordinary, or extra hazard, com-
mercial occupancies such as banks,
hotels, shopping malls, factories, refin-
eries, chemical plants, etc.
The recessed version of the Series
TY-B Pendent Sprinkler, where appli-
cable, is intended for use in areas with
a finished ceiling. It uses a two -piece
Style 10 (1/2 inch NPT) or Style40 (3/4
Inch NPT) Recessed Escutcheon. The
Recessed Escutcheon provides 1/2
inch (12,7 mrn) of recessed adjust-
ment or up to 3/4 inch (19,1 mm) of
total adjustment from the flush pen-
dent position. The adjustment provided
by the Recessed Escutcheon reduces
the accuracy to which the fixed pipe
drops to the sprinklers must be cut.
Corrosion resistant coatings, where
applicable, are utilized to extend the
life of copper ahoy sprinklers beyond
that which would otherwise be ob-
tained when exposed to corrosive at-
mospheres. Although corrosion resis-
tant coated sprinklers have passed the
standard corrosion tests of the appli-
cable approval agencies, the testing is
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the "INSTALLER
WARNING" that provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. Improper handing and in-
stallation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
Page 1 of 8
not representative of all possible cor-
rosive atmospheres. Conseajuentiy, rt
is recommended that the end user be
consulted with respect to the suitability
of these _coatingss for any given corro-
sive The effects of ambi-
ent temperature, concentration of
cherntoals, and gas/chemical velocity,
should be considered, as a minimum,
along with the corrosive nature of the
chemical to which the sprinklers will be
exposed.
An intermediate level version of the
Series TY-B Pendent Sprinkler can be
obtained: by utilizing the Series TY-B
Pendent Sprinkler in combination with
the Model S2 Shield.
WARNINGS
The Series TY-B Sprinklers described
herein must be installed and main-
tained in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association, in addition to the
standards of any other authorities hav-
ing/urisdiction. Failure to do so may
impair the performance of these de-
vices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions,
Model/Sprinlder
Ident ficatiion
numbers
TY1151 -
TY1251 -
TY3151-
TY3251 -
TY4151 -
TY4251 -
T1(4851
TY4951 -
Upright 2.BK,112 "NPT
Pendent 2.8K, ti2 "NPT
Upright . 5-6K,1 /2°NPT
Pendent 5.6 1/2 "1
Upright 8.tiK, 3/4 "NPT
Pendent 8.0K, 3/4 "NPT
Upright 8 OK,1/2"NPT
Pendent 8.0K,1/2 "NPT
JULY, 2004
TFP151
Page 2 of 8
'
• •
T Pf Si
1 - Frame
2 - Button
ESCUTCHEON 7/16' 01,1 mm)
PLATE SEATING ° •• NOMINAL SSU*
SURFACE t�MT MAKE -IN DEFLECTOR
2-1/4'
(57,2 mm)
3 - Sealing 4 - Bulb
Assembly 5 -Compression
Screw
SSP
DEFLECTOR
PENDENT UPRIGHT
6 - Deflector * Temperature rating is indicated on deflec ooror adjacent to
7 - Bushing orifice Seat on frame. • • • • • • • •••
* thread connections' pr1S® 7/1 can be'provided str‘ •
special request. 0 000• • 0 • • •
0000 • ••
CROSS
SECTION • •
FIGURE STANDARD RESPONSE SERIES ma UPRIGHT ' 151) AND PENDENT (TY12W'SPRIM (I
8 K FACTOR, 1.12 INCH NPT
• • •
6
5
4
2
3
1
7
••
• •
..••
•
•••
•••
•
SOO
ESCUTCHEON 7/16' (11,1 mm)
PLATE SEATING ** NOMINAL
SURFACE NPT 1N
1
2 -3/16°
(55,6 mm) 1
1 -1/2°
(38,1 mm)
SSP DEFLECTOR
PENDENT
1 - Frame 3 - Sealing
2 - Button Assembly
4-Bulb
5 - Compression
Screw
STYLE 10
RECESSED
ESCUTCHEON
WRENCH
FLATS
2 -7/8° (73,0 tarn) DIA. — 4 1
RECESSED PENDENT
6 - Deflector
SSU
DEFLECTOR
• •
•• •
••••
• •••
• • •
•• •
•
•••
•
CROSS SECTION
* Temperature rating is indicated on deflector or adjacent to
orifice seat on frame.
* thread connections per ISO 7/1 can be provided on
special request.
FIGURE 2
STANDARD RESPONSE SERIES TY-B UPRIGHT (TY3151) AND PENDENT (TY3251) SPRINKLERS
5.6 K- FACTOR, 112 INCH NPT
1••
r
•
t••
•
1••
•
r•
•
•
•
••
•
TFP151
ESCUTCHEON
PLATE SEATING
SURFACE
2- 5/16°
(58,7
mm)
1 -9/16°
(3 mm)
SSP DEFLECTOR
1/2° (12,7 mm)
3/4° ** NOMINAL
MIT
MAKE-IN
STYLE 40
RECESSED
ESCUTCHEON
WRENCH
RATS
2 -7/8° (7$,0 mm) [?IA
PENDENT RECESSED PENDENT
FIGURE
SSU
DEFLECTOR
3/4°
UPRIGHT
1/2
(12,7 mm)
NOMINAL
MAKE -IN
2 -1/4°
(57,2 mm)
••••
• • CROSS SECTION •.
• • • •
•. • • •
• • •
1 - Frame 3 4 - Bulb 6 - Deflector * Temperature rating is incUeat'c5n detect8Por atijacent't8
2 - Button Assembly 5 - Compression 7 Ejection orifice seat on frame, • : • •
Screw Spring **Pipe thread connectionsitto 7/1 cm b pivided opt
special request. . • . • • • • • • •
•
•••
••••
STANDARD RESPONSE SERIES T Y -Q UPRIGh T (TY4151) AND PENDENT (TW2�bi) SPRINkCLERd
11.0 K- FACTOR, 314 INCH NPT
• .•
•
.••
•
Page 3ofS
•
1 - Frame
2 - Button
ESCUTCHEON 7/16° (1'1,1 mm)
PLATESEAT G NOMINAL SSU
SURFACE I /T MAKE -IN DEFLECTOR
2 -1/4°
(57,2 mm)
1-9/16°
(39,7 min)
3 - Sealing 4-Bub
Assembly 5 - Compression
Salem
WRENCH
FLATS
SSP
DEFLECTOR
PENDENT UPRIGHT
6- Deflector
• - .
•• •
23/16°
(55,6 mm)
CROSS
SECTION
*
• •
• • •
•• •
FIGURE 4
STANDARD RESPONSE SERIES TY 0 UPRIGHT (7Y4851) AND .PENDENT (TY4951) SPRINKLERS
8,e KKFACTOR, 1,V INCH NNPT
* Temperature rating is indicated on deflector or adjacent to
orifice seat-on frame.
**Pipe thread connections per ISO 7/1 can be provided on
special request
•••
•••
•
•••
•
• •
•
••
..•
•
••
.•.
•
•••
•
Page 4 of 8
TABLE A
LABORATORY LISTINGS AND APPROVALS
ISM Si
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL).
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL).
3. Approved by Factory Mutual Research Corporation (FM).
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k103).
5. Approved by the City of New York under MEA 354 -01 -E.
6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31-53-428-4444/Fax 31- 53- 428 - 3377).
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/05).
8. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C -UL Listed, the
sprinklers are UL and C-UL Listed as. Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead Coated
Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as Corrosion Resistant Sprinklers.
• Installed with Style 10 (1/2° NPT) or Style 40 (3/4° NPT) 3/4° Total Adjustment Recessed Escutcheon, as applicable.
..� 50 °F /66 °C Maximum Ceiling Temperature.
Frame and deflector only. Listings and approvals apply to color (Special Order).
N/A: Not Available
SPRINKLER FINISH (See Note 8)
K
TYPE
TEMP.
BULB
LIQUID
NATURAL CHROME
BRASS PLATED
WHiI E*`*
° . YESTER
LEAD
COATED
WAX
COATED
WAX OVER
LEAD COATED
1i
NPT
135 °F /57°C
Orange
1, 2, 3
N/A
PENDENT
w and
155
Red
175°F/79°C
Yellow
UPRIGHT
200F/93°C
Green
(TY1151)
286F/141°C
Bkte
360F/182°C
Mauve
1, 2
5.6
P
PENDENT
(TY3251)
and
UPRIGHT
(N3151)
135°F/57 °C
Orange
1,2,3,4,5,6,7
1,2,3,5
1,2,3,5 4 ..:,2,3,5
•
• .. • • 1 •
•
155 ° F/68°C
Red
175 °F /79 °C
Yellow
200 °F /93 °C
Green
D avar.3'", 5 • Z'*. 3*31 ,
286°F/141
286°F/141°C
Blue
•
•
• N/A • •
_
360F/182°C
Mauve
RECESSED
PENDENT
(Ty�1)*
Figure 4
135 °F /57°C
Orange
1, 2, 3, 4, 5
1,
2, 4, 5
. • • •
•••••• •
• • • N/A ••
• • • • •
• • •
• •
•••• ••• •
•
•• • • • . •
• •
• • ••• '
• ■
155 ° F /68°C .
Red
175°F/79°C
Yellow
200 °F /93°0
G r e en
3/4°
NPT
PENDENT
(TY4251)
and
UPRIGHT
(TY4151)
135 °F /57 °C
Orange
1, 2, 3, 4, 5, 6, 7
1,2,5
• • • •
' .. • • •
•
1,2,3,5 •..•
• • • • • •
•.• ••••
•
:1,2,5
155 F /68°C
Red
175 °F /79 °C
Yellow
200 °F /93°C
Green
286°F/141°C
Blue
1",2", 3 ", 5"
1", 2", 5"
360°F /182 °C
Mauve
WA
RECESSED
PENDENT
(TY4251)*
Figure 5
135 °F /57°C
Orange
N/A
155 °F /68 °C
Red
1, 2, 4, 5
175 °F179 °C
Yellow
3,
200°F/93°C
Green
8.0
1/2°
NPT
PENDENT
(TY4951)
and
UPRIGHT
(TY41)
135 °F /57°C
Orange
N/A
•
155°F/68 °C
Red
175 °F /79 °C
Yellow
1, 2, 3, 5
200 °F /93°C
Green
286°F/141°C
Blue
360 °F /182 °C
Mauve
Page 4 of 8
TABLE A
LABORATORY LISTINGS AND APPROVALS
ISM Si
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL).
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL).
3. Approved by Factory Mutual Research Corporation (FM).
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k103).
5. Approved by the City of New York under MEA 354 -01 -E.
6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31-53-428-4444/Fax 31- 53- 428 - 3377).
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/05).
8. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C -UL Listed, the
sprinklers are UL and C-UL Listed as. Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead Coated
Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as Corrosion Resistant Sprinklers.
• Installed with Style 10 (1/2° NPT) or Style 40 (3/4° NPT) 3/4° Total Adjustment Recessed Escutcheon, as applicable.
..� 50 °F /66 °C Maximum Ceiling Temperature.
Frame and deflector only. Listings and approvals apply to color (Special Order).
N/A: Not Available
Page 4 of 8
TABLE A
LABORATORY LISTINGS AND APPROVALS
TFP151
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL).
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL).
3. Approved by Factory Mutual Research Corporation (FM).
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/03).
5. Approved by the City of New York under MEA 354 -01 -E.
6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31- 53- 428- 4444/Fax 31 -53 -428- 3377).
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/05).
8. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C -UL Listed, the
sprinklers are UL and C -UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead Coated
Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as Corrosion Resistant Sprinklers.
* Installed with Style 10 (1/2° NPT) or Style 40 (3/4° NPT) 3/4° Total Adjustment Recessed Escutcheon, as applicable.
** 150 °F /66 °C Maximum Ceiling Temperature.
* ** Frame and deflector only. Listings and approvals apply to color (Special Order).
N /A: Not Available
•
• •
••••
• •
• •••
••
•
•
•
•
SPRINKLER FINISH (See Note 8)
K
TYPE
TEMP.
BULB
NATURAL
CHROME
WHITE***
LEAD
WAX
WAX OVER
LIQUID
BRASS
PLATED
POLYESTER
COATED
COATED
LEAD COATED
135 °F /57 °C
Orange
PENDENT
155 °F /68 °C
Red
2.8
1 )
1,2,3
WA
175 °F /79 °C
Yellow
1/2°
and
NPT
UPRIGHT
200 °F /93 °C
Green
(TY1151)
286 °F /141 °C
Blue
360 °F /182 °C
Mauve
1, 2
135 °F /57 °C
Orange
PENDENT
155 °F /68 °C
Red
(TY3251)
1,2,3,4,5,6,7
1,2,3,5
1,2,3,5
1,2,3,5
175 °F /79 °C
Yellow
and
UPRIGHT
200 °F /93 °C
Green
• •
• •••• •
5.6
(TY3151)
286 °F /141 °C
Blue
1 ** 2"! 3**`5 ** 11;v 2 **, 5 **
1/2"
360 °F /182 °C
-
Mauve
• N/A " _ '
NPT
135 °F /57 °C
Orange
•••• • • •
RECESSED
155 °F /68 °C
Red
•••• • • • •
PENDENT
(TY3251)*
1, 2, 3, 4, 5
1, 2, 4, 5
".• • • "• •
•• •• •• •
175"F/79°C
Yellow
200 °F /93 °C
Green
Figure 4
PENDENT
135 °F /57 °C
Orange
• ' •
' •
••••
• •
• • • • •
155 °F /68 °C
Red
(TY4251)
1, 2, 5
1.8,
• 10 2.5 i
175 °F /79 °C
Yellow
and
1, 2, 3, 4, 5, 6, 7
' ' •
•• •
8.0
UPRIGHT
200 °F /93 °C
Green
3/4°
(TY4151)
286 °F /141 °C
Blue
1 * *,2 * *, 3 * *, 5 **
I 1 *" 2 ** 5 **
NPT
360 °F/182 °C
Mauve
N/A
135 °F /57 °C
Orange
RECESSED
155 °F /68 °C
Red
PENDENT
1, 2, 3, 4, 5
N/A
175 °F /79 °C
Yellow
(TY4251)•
Figure 5
200 °F /93 °C
Green
135 °F /57 °C
Orange
8.0
4D.98
155 °F /68 °C
Red
1/2"
and
175 °F /79 °C
Yellow
1, 2, 3, 5
N/A
NPT
UPRIGHT
(TY4851)
200 °F /93 °C
Green
286 °F /141 °C
Blue
360 °F /182 °C
Mauve
Page 4 of 8
TABLE A
LABORATORY LISTINGS AND APPROVALS
TFP151
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL).
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL).
3. Approved by Factory Mutual Research Corporation (FM).
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/03).
5. Approved by the City of New York under MEA 354 -01 -E.
6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31- 53- 428- 4444/Fax 31 -53 -428- 3377).
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/05).
8. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C -UL Listed, the
sprinklers are UL and C -UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead Coated
Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as Corrosion Resistant Sprinklers.
* Installed with Style 10 (1/2° NPT) or Style 40 (3/4° NPT) 3/4° Total Adjustment Recessed Escutcheon, as applicable.
** 150 °F /66 °C Maximum Ceiling Temperature.
* ** Frame and deflector only. Listings and approvals apply to color (Special Order).
N /A: Not Available
•
• •
••••
• •
• •••
••
•
•
•
•
TFP151
2-7/8° DIA.
(73,0 mm)
5/811/4°
(15,9±6,4 mm)
FACE OF
SPRINKLER
FITTING
MOUNTING
SURFACE
CLOSURE
SERIES
TY-B
2 -1/4° DIA.
(57,2 mm)
3/4° (19,1 mm)
1/4" (6,4 mm)
MOUNTING
PLATE
1/8"
(3,2 mm)
1
1-1/4" (31,8 mm)
3/4° (19,1 mm)
FIGURE 5
SERIES TY-B RECESSED PENDENT SPRINKLER ASSEMBLY
WITH TWO -PIECE 3/4 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON
5.6 K- FACTOR, 1/2 INCH NPT
5/8±1/4"
(15,9±6,4 mm)
FACE OF
SPRINKLER
FITTING
MOUNTING
SURFACE
CLOSURE
2 -7/8° DIA.
(73,0 mm)
2-1/4" DIA.
(57,2 mm)
SERIES
TY-B
3/4" (19,1 mm)
1/4" (6,4 mm)
MOUNTING
PLATE
1/8"
(3,2 mm)
1 -5/16° (33,3 mm)
13/16° (20,6 mm)
FIGURE 6
SERIES TY-B RECESSED PENDENT SPRINKLER ASSEMBLY
WITH TWO -PIECE 3/4 INCH TOTAL ADJUSTMENT
STYLE 40 RECESSED ESCUTCHEON
8.0 K- FACTOR, 3/4 INCH NPT
Page 5 of 8
WRENCH RECESS
(END °B° USED FOR
3/4° NPT MODELS)
WRENCH RECESS
(END °A° USED FOR
1/2° NPT MODELS)
FIGURE 7
W -TYPE 6 SPRINKLER
WRENCH
• WRENCH • ••• •
• • RECESS
•• •
•
PUSI- 'WRENCH• • •
INTO ENSURE •
ENGAGEMENt
WITH SPRINK6ER : •
WRENCHING AREA •
FIGURE 8
W -TYPE 7 RECESSED
SPRINKLER WRENCH
•
•
i
•
•
•
•
••••
• •
••••
•
•
•
Page 6 of 8 TfP1S1
Tecihnical
Data
Approvals
UL and C -UL Listed.
FM, LPCB, VdS, and NYC Approved.
(Refer to Table A for complete approval
information including corrosion resis-
tant status.)
Maximum Working Pressure
175 psi (12,1 bar)
Discharge Coefficient
K = 2.8 GPM /psl (40,3 LPM/bar
K = 5.6 GPM/psi (80,6 LPM/bar
K = 8.0 GPM/psilr (115,2 LPM/barlI
Temperature Ratings
Refer to Table A
Finishes
Sprinkler: Reessed Escutcheon: White
Coated, Chrome Plated, or Brass
Plated
Physical Characteristics
Frame Bronze
Button Brass/Copper
Sealing Assembly
Beryllium Nickel w/Teflont
Bulb Glass
Compression Screw Bronze
Deflector Copper
Bushing (K =2.8) Bronze
Operation
The glass Bulb contains a fluid which
expands when exposed to heat. When
the rated temperature is reached,,the
fluid expands sufficiently to shatter the
glass Bulb, allowing the sprinkler to
activate and water to flow.
Design
Criteria
The Series TY-B Pendent and Upright
Sprinklers are intended for fire protec-
tion systems designed in accordance
with the standard Installation rules rec-
ognized by the applicable Listing or
Approval agency (e.g., UL Listing is
based on the requirements of NFPA
13, and FM Approval is based on the
requirements of FM's Loss Prevention
Data Sheets). Only the Style 10 or 40
Recessed Escutcheon, as applicable,
is to be used for recessed pendent
installations.
Installation
The Series TY-B Sprinklers must be
installed in accordance with the follow-
ing instructions:
NOTES
Dv not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1/16 inch
(1,6 mm) for the 135°F/57°C to 3/32
inch (2,4 mm) for the 360
temperature ratings.
A leak tight 1/2 inch NPT sprinklerjoint
should be obtained with a torque of 7
to 14 ftlbs. (9,5 to 19,0 Nm). A maxi=
mum of 21 ft. lbs. (28,5 Nm) of torque
may be used. to inStali sprinklers .with
1/2 NPT connections. A leak tight 3/4
inch NPT sprinkler joint should be ob-
tained with a torque of 10 to 20 ft lbs.
(13,4 to 26,8 Nm). A maximum of 30
ft.lbs. (40,7 Nm) of torque is to be used
to install sprinklers with 3/4 NPT con -
nectionst Higher levels of torque may
distort the sprinkler inlet and cause
leakage or impairment of the sprinkler.
Do not attempt to make -up for insuffi-
cient adjustment in the escutcheon
plate by under- or over - tightening the
sprinkler. Readjust the position of the
sprinkler fitting to suit
The Series TY -B Pendent and Up-
right Sprinklers must be installed in
accordance with the following instruc-
tions.
Step 1. Pendent sprinklers are to be
installed in the pendent position, and
upright sprinklers are to be installed in
the upright position.
Step 2: With pipe thread sealant ap-
plied to the pipe threads, hand tighten
the sprinkler into the sprinkler fitting.
Step 3. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
6 Sprinkler Wrench. (Ref. Figure 7),
except that an 8 or 10 inch adjustable
Crescent wrench is to be used for wax
coated sprinklers. With reference to
Figures '1 2, 3, and 4 `the W -Type 7
Sprinkler Wrench or the adjustable
Crescent wrench, as applicable is to
be applied to the wrench flats.
When installing wax coated sprinklers
with the adjustable Crescent wrench,
additional care needs to be exercised
to prevent darnage to the Waal coating
on the sprinkler wrench flats or frame
arms and, consequently, exposure of
bare metal to the corrosive environ-
ment. The Jaws of the wrench should
be opened sufficiently wide to pass
over the wrench flats without damag-
ing the wax coating. Before wrench
tightening the sprinkler, the jaws of the
wrench are to be adjusted to Just con-
tact the sprinkler wrench flats. After
wrench tightening the sprinkler, loosen
the wrench jaws before removing the
wrench.
After installation, the sprinkler wrench
flats and frame arms must be in-
spected and the wax coating re-
touched (repaired) whenever the coat-
ing has been damaged and bare metal
is exposed. The wax coating on the
wrench flats can be retouched by gen-
tly applying a heated 1/8 inch diameter
steel rod to the areas of wax that have
been damaged, to smooth it back over
areas when; bare rnbyal jg bxpose,c1 • . • •
• • • •
•• •
NOTa ••. • •
Only rrfot,,Nifrg of the Araxt oating 8p' • •
plied Z ?MS wrench flats and frame •
arms is permitted, and the retoudrldd '
is to be.partarmed 6nP,,efthe tirq@ QC.
the in1 igl.spripkler inatg y4tion. • •
T tie stestrod shoulc768 heated only to • •
the p t •at dhich it cartbegin to melt •
the w4x, ifncCapprop�g(•precautrQriu,
need LO be taken, when handling Me
heated roe' fin ordeP't8'prevene ih4 •:
installel fromf' being Obr484 • •
If attempts to retouch the wax coating
with . complete coverage are unsuc-
cessful, additional wax can be ordered
in the form of a wax stick (the end of
which is color coded). Only the correct
color coded wax is to be used, and
retouching of wrench flats and frame
arms Is only permitted at the time of
initial sprinkler installation. With the
steel rod heated as previously de-
scribed, touch the rod to the area re-
quiring additional wax with the rod an-
gled downward, and then touch the
wax stick to the rod approximately
one -half inch away from the area re-
quiring retouching. The wax will melt
and run down onto the sprinkler.
The Series TY -B Recessed Pendent
Sprinklers must be installed in ac-
cordance with the following instruc-
tions.
Step A. After installing the Style 10 or
40 Mounting Plate, as applicable, over
the sprinkler threads and with pipe
thread sealant applied to the pipe
threads, hand tighten the sprinkler into
the sprinkler fitting.
Step B. Tighten the sprinkler into the
sprinkler fitting: using only the W -Type
7 Recessed Sprinkler Wrench (Ref.
Figure 8). With reference to Figure 3 or
4, the W TYpe 7 Recessed Sprinkler
Wrench is to be applied to the sprinkler
wrench flats.
Step C. After the ceiling has been in-
TFP151 Page7of8
stalled or the finish coat has been ap-
plied, slide on the Style 10 or 40 Clo-
sure over the Series TY-B Sprinkler
and push the Closure over the Mount-
ing Plate until its flange comes in con-
tact with the ceiling.
Care and
Maintenance
The Series TY-B Sprinklers must be
maintained and serviced in accord-
ance with the following Instructions:
NOTES
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system that
it controls, permission to shut down the
affected fire protection system must be
obtained from the proper authorities
and all personnel who may be affected
by this action must be notified.
Absence of an escutcheon, which is
used to cover a clearance hole, may
delay the time to sprinkler operation in
a fire situation.
Sprinklers that are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers must never be
painted, plated, coated or otherwise
altered after leaving the factory. Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
age to the sprinklers - before, during,
and after installation. Sprinklers dam-
aged by dropping, striking, wrench
twist/slippage, or the like, must be re-
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb. (Ref. Installation
Section).
Frequent visual inspections are rec-
ommended to be initially performed for
corrosion resistant coated sprinklers,
after the installation has been com-
pleted, to verify the integrity of the cor-
rosion resistant coating. Thereafter,
annual inspections per NFPA 25
should suffice; however, instead of in-
specting from the floor level, a random
sampling of close -up visual inspec-
tions should be made, so as to better
determine the exact sprinkler condi-
tion and the long term integrity of the
corrosion resistant coating, as it may
be affected by the corrosive conditions
present.
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service in accordance with
local requirements and /or national
codes.
Limited
Warranty
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have bum 6ubject
to misuse,impjdper instaflat!dn, corro
sion, or which hate not Dee ir�stalled,
maintainedtrnodified or rap1red in ac•
cordance W, titbs'tpplicable Standards of
the Nationg) Prote¢yon 44ssociaa
tion, and/or Oil standards of any other
Authorities Juri$dict/dn. Mate-
rials found 611"/Co Fire reltrejs to be •
defective shah •be either repaired or
replaced, .et•T . Fire Products' sole ••
option. Tyro F1 re;Productsmither as,; •
sumes, ngr autorizes spy person to
assume for ittaMy other obligation i3
connectionfn7ith t ?e salQ,df arnucts oY
parts of products. Tyco Fite Products
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, INDIRECT,
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS' LI-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY IS
MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES EXPRESS OR
IMPLIED INCLUDING WARRANTIES
OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PUR-
POSE,
•
•
•
•••
•
•
• •
•
•
530
2.8K UPRIGHT (1 /2 °NPT)
TY1151
531
2.8K PENDENT (1 /2 °NPT)
TY1251
570
5.6K UPRIGHT (1 /2 "NPT)
TY3151
571
5.6K PENDENT (1 /2 "NPT)
TY3251
590
8.0K UPRIGHT (3 /4 "NPT)
TY4151
591
8.0K PENDENT (3 /4 "NPT)
TY4251
560
8.0K UPRIGHT (1 /2 "NPT)
TY4851
561
8.0K PENDENT (1 /2 "NPT)
TY4951
Page 8 of 8
Ordering
Procedure
P/N 57 - XXX - X - XXX
When placing an order, indicate the full
product name. Refer to the Price List
for complete listing of Part Numbers.
Contact your local distributor for avail-
ability.
Sprinkler Assemblies with NPT
Thread Connections:
Specify: (Specify Model /SIN), Stand-
ard Response, (specify K- factor),
(specify temperature rating), Series
TY-B (specify Pendent or Upright)
Sprinkler with (specify type of finish or
coating), P/N (specify from Table B).
MODEUSIN
4
3
9
7
6
8
SPRINKLER
NATURAL BRASS
WHITE POLYESTER
WHITE (RAL9010)*
CHROME PLATED
LEAD COATED
WAX COATED
286°F/141°C MAX.
WAX OVER LEAD
286°F/141°C MAX.
TABLE B
PART NUMBER SELECTION
SERIES TY-B PENDENT AND UPRIGHT SPRINKLERS
Recessed Escutcheon:
Specify: Style (specify) Recessed Es-
cutcheon with (specify finish), P/N
(specify).
1/2" (15 mm)
Style 10
Chrome Plated
1/2° (15 mm)
Style 10
White Color
Coated
1/2° (15 mm)
Style 10
White RAL9010*
1/2° (15 mm)
Style 10
Brass Plated
3/4° (20 mm)
Style 40
Chrome Plated
3/4° (20 mm)
Style 40
White Color
Coated
3/4° (20 mm)
Style 40
White RAL9010*
3/4° (20 mm)
Style 40
Brass Plated
P/N 56- 701 -9-010
P/N 56-701 -4 -010
P/N 56- 701 -3-010
P/N 56- 701 -2 -010
P/N 56 -700 -9-010
P/N 56- 700 -4 -010
P/N 56- 700 -3-010
P/N 56- 700 -2 -010
* Eastem Hemisphere sales only.
Sprinkler Wrench:
Specify: W -Type 6 Sprinkler Wrench,
P/N 56- 000 -6 -387.
Specify: W -Type 7 Sprinkler Wrench,
P/N 56- 850 -4 -001.
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
135
155
175
200
286
360
TEMPERATURE
RATING
135 °F /57 °C
155 °F /68 °C
175 °F /79 °C
200 °F /93 °C
286 °F /141 °C
360 °F /182°C
• •
• • •
•• •
•
• •
TFP151
••••
• •••
• • •
•• •
•
Easteg g saless nly.
• • • • •
•••• • ••
••••
• • • • •
•
•• ••
•
• •
• • • •
• • ••••
• •
• • •••• •
Wax Sticks: • •
(for retouching wren& Va:maged
wax coating)
Specify: (Specify color) color coded
Wax Stick for retouching (specify tem-
perature rating) temperature rated Se-
ries TY-B Sprinklers, P/N (specify).
•• •
•
•
Black for 135 °F P/N 56 -065 -1 -135
Red for 155 °F P/N 56 -065 -1 -155
Yellow for 175 °F P/N 56- 065 -1 -175
Blue for 200 °F and
286 °F P/N 56 -065 -1 -286
NOTES
Each wax stick is suitable for retouch-
ing up to twenty-five sprinklers.
The wax used for 286 °F sprinklers is
the same as for 200°F sprinklers, and,
therefore, the 286 °F sprinkler is limited
to the same maximum ceiling tempera-
ture as the 200 °F sprinkler (i.e.,
150 °F).
•
•
•
•
•
• •
•
•
tqco/ fire &Building
Products
Technical Services: Tel: (800) 381 -9312 / Fax: (800) 791 -5500
[ANTRAL
Customer Service/Sales:
Tel: (215) 362 -0700 / (800) 523 -6512
Fax: (215) 362 -5385
Series TY -B — Z8, 5.6, and 8.0 K- factor
Upright, Pendent, and Recessed Pendent Sprinklers
Standard Response, Standard Coverage
General
Description
The Series TY-B, 2.8, 5.6, and 8.0
K- factor, Upright and Pendent Sprin-
klers described in this data sheet are
standard response - standard cover-
age, decorative 5 mm glass bulb type
spray sprinklers designed for use in
light, ordinary, or extra hazard, com-
mercial occupancies such as banks,
hotels, shopping malls, factories, refin-
eries, chemical plants, etc.
The recessed version of the Series
TY-B Pendent Sprinkler, where appli-
cable, is intended for use in areas with
a finished ceiling. it uses a two -piece
Style 10 (1/2 inch NPT) or Style 40 (3/4
inch NPT) Recessed Escutcheon. The
Recessed Escutcheon provides 1/2
inch (12,7 mm) of recessed adjust-
ment or up to 3/4 inch (19,1 mm) of
total adjustment from the flush pen-
dent position. The adjustment provided
by the Recessed Escutcheon reduces
the accuracy to which the fixed pipe
drops to the sprinklers must be cut.
Corrosion resistant coatings, where
applicable, are utilized to extend the
life of copper alloy sprinklers beyond
that which would otherwise be ob-
tained when exposed to corrosive at-
mospheres. Although corrosion resis-
tant coated sprinklers have passed the
standard corrosion tests of the appli-
cable approval agencies, the testing is
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the "INSTALLER
WARNING" that provides cautions
with respect to handling and instal-
lation of sprinkler systems andcoin-
ponents. Improper handling and in-
stallation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
Page 1 of 8
not representative of all possible cor-
rosive atmospheres. Consequently, it
is recommended that the end user be
consulted with respect to the suitability
of these coatings for any given corro-
sive environment. The effects of ambi-
ent temperature, concentration of
chemicals, and gas /chemical velocity,
should be considered, as a minimum,
along with the corrosive nature of the
chemical to which the sprinklers will be
exposed.
An intermediate level version of the
Series TY-B Pendent Sprinkler can be
obtained by utilizing the Series TY-B
Pendent Sprinkler in combination with
the Model S2 Shield.
WARNINGS
The Series TY-B Sprinklers described
herein must be installed and main-
tained In compliance with this docu-
ment as well as with the applicable
standards of the National Fire Protec-
tion Association, in addition to the
standards of any other authorities hav-
ing jurisdiction. Failure to do so may
impair the performance of these de-
vices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.
Model /Sprinkler
identification
Numbers
TYt151 -
TY1251 -
TY3151 -
TY3251 -
TY4151 -
TY4251 -
TY4851 -
TY4951 -
Upright . 2.8K,112"NPT
Pendent 2.8K,1/2"NPT
Upright 5.8K,1 /2 "NPT
Pendent 5.6K,1/2 "NPT
Upright 8.OK, 3/4 "NPT
Pendent 8.0K, 3/4 "NPT
Upright 8.OK, 1/2"NPT
Pendent 8.0K,1/2 "NPT
JULY, 2004
TFP151
Page 2 of 8
TFP151
ESCUTCHEON 7/16° (11,1 mm)
PLATE SEATING ° •• NOMINAL SSU
SURFACE NP T MAKE -IN DEFLECTOR
2 -1/4°
(57,2 mm)
1 -9/16°
(39,7 mm)
WRENCH
FLATS
SSP
DEFLECTOR
PENDENT UPRIGHT
1 - Frame 3 - Sealing 4 - Bulb 6 - Deflector
2 - Button Assembly 5 - Compression 7 - Busting
Screw
CROSS
SECTION
* Temperature rating is indicated on deflector or adjacent to
orifice seat on frame. • . • .
** Pipe thread connections per i.SO 7/•1 can be'3jc» jli on
special request. • • •
spe q •• • • •••
• • •
FIGURE 1 •• •
STANDARD RESPONSE SERIES TY-B UPRIGHT (TY1151) AND PENDENT (TY12$175PRINKLERS•
2.8 K -FACTOR, 1/2 INCH NPT • • • • •• • • • • •••• • • •. •
••••
ESCUTCHEON 7/16° (11,1 mm)
PLATE SEATING ** NOMINAL
SURFACE N MAKE -IN
2 -3/16°
(55,6 mm) 1
1 -1/2°
(38,1 mm)
STYLE 10
RECESSED
ESCUTCHEON
WRENCH
FLATS
SSP DEFLECTOR 2 -7/8° (73,0 mm) DIA. 1/2° NPT **
PENDENT RECESSED PENDENT UPRIGHT
1 - Frame 3 - Sealing 4 - Bulb
2 - Button Assembly 5 - Compression
Screw
6 - Deflector
SSU
DEFLECTOR
••
• • •
• •
7/16°
(11,1 mm)
NOMINAL
MAKE -IN
2 -3/16°
(55,6 mm)
• • •
•• •
•
CROSS SECTION
FIGURE 2
STANDARD RESPONSE SERIES TY-B UPRIGHT (TY3151) AND PENDENT (1Y3251) SPRINKLERS
5.6 K -FACTOR, 1/2 INCH NPT
* Temperature rating is indicated on deflector or adjacent to
orifice seat on frame.
** Pipe thread connections per ISO 7/1 can be provided on
special request.
•
•
•
• •
• •
•••••
• •
•0
•
•
TFP151
Page 3 of 8
ESCUTCHEON
PLATE SEATING
SURFACE
2 -5/16°
(58,7 mm) 1
1 -9/16°
(39,7 mm)
1/2° (12,7 mm)
3/4° ** NOMINAL
NPT MAKE -IN
STYLE 40
RECESSED
ESCUTCHEON
WRENCH
FLATS
SSU
DEFLECTOR
2 -7/8° (73,0 mm) DIA. —.-1 3/4° NPT
SSP DEFLECTOR
PENDENT RECESSED PENDENT UPRIGHT
1 - Frame 3 - Sealing 4 - Bulb 6 - Deflector
2 - Button Assembly 5 - Compression 7 - Ejection
Screw Spring
1/2°
(12,7 mm)
NOMINAL
MAKE -IN
t
2 -1/4°
(57,2 mm)
CROSS SECTION
* Temperature rating is indicated on deflector quatcent to
orifice seat on frame. • • • • ** Pipe thread connections pef'IW'7 /= can be ism on
special request.
• • •
.• •
FIGURE 3 • RSt
STANDARD RESPONSE SERIES TY-B UPRIGHT (TY4151) AND PENDENT (TY425I j N RINK L. •
8.0 K- FACTOR, 3/4 INCH NPT •
410 0. • •
•
•
•
•
•
ESCUTCHEON 7/16" (11,1 mm)
PLATE SEATING ° ** NOMINAL SSU
SURFACE NPT MAKE -IN DEFLECTOR
2-1/4'
(57,2 mm) 1
1 -9/16°
(39,7 mm)
1 - Frame 3- Sealing 4 - Bulb
2 - Button Assembly 5 - Compression
Screw
WRENCH
FLATS
2 -3/1 s°
(55,6 mm)
'
Olt
—= 7
SSP
DEFLECTOR
PENDENT UPRIGHT
6 - Deflector
CROSS
SECTION
•. .•
• • •
• •
.. •
•
4100. •
41 •
•
• •0• •
• ••
•• •
* Temperature rating is indicated on deflector or adjacent to
orifice seat on frame.
** Pipe thread connections per ISO 7/1 can be provided on
special request.
FIGURE 4
STANDARD RESPONSE SERIES TY-B UPRIGHT (TY4851) AND PENDENT (TY4951) SPRINKLERS
8.0 K- FACTOR, 112 INCH NPT
•
•• •
••
•
•
•
•41..
• •
•
•
Page 4 of 8
TFP151
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL).
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL).
3. Approved by Factory Mutual Research Corporation (FM).
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/03).
5. Approved by the City of New York under MEA 354 -01 -E.
6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31- 53- 428- 4444/Fax 31- 53- 428 - 3377).
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/05).
8. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C -UL Listed, the
sprinklers are UL and C-UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead Coated
Sprinklers are noted to be FM Approved, the sprinlers are FM Approved as Corrosion Resistant Sprinklers.
* Installed with Style 10 (1/2° NPT) or Style 40(3/4° NPT) 3/4° Total Adjustment Recessed Escutcheon, as applicable.
'* 150 °F /66 °C Maximum Ceiling Temperature.
""* Frame and deflector only. Listings and approvals apply to color (Special Order).
N/A: Not Available
TABLE A
LABORATORY LISTINGS AND APPROVALS
••••
•
•
•• ••
•
••••
•
•••
• •
•••
••••
••
•
••••
•
•
•
SPRINKLER•FINISH (See Note 8)
K
TYPE
TEMP.
BULB
UOUID
NATURAL
BRASS
CHROME •
PLATED
WHITE""
POLYESTER
LEAD I
COATED
WAX
COATED I
WAX OVER
LEAD COATED
135 °F /57 °C
Orange
PENDENT
155 °F /68 °C
Red
2.8
(TY1251)
1, 2, 3
N/A
175'F179°C
Yellow
1/2"
and
NPT
UPRIGHT
200
Green
(iY1151)
286°F/141 °C
Blue
360°F/182 °C
Mauve
1, 2
135 °F /57°C
Orange
PENDENT
(TY3251)
155 °F /68 °C
Red
1,2,3,4,5,6,7
1,2,3,5
1,2,3,5
1,2,3,5
175 °F179 °C
Yellow
and
UPRIGHT
200 °F /93 °C
Green
5.6
(TY3151)
286 °F /141 °C
Blue
1 * *,2 * *, 3**, 5 **
1", 2 ", 3* *, 5**
1/2" T
360°F /182 °C
Mauve
• _ wa •
135 °F /57 °C
Orange
• • • • • • • • •
•
RECESSED
155 °F /68 °C
Red
• • • ` • •
PENDENT
1,2,3,4,5
1,2,4,5
•••N4' • •
175 °F /79 °C
(TY3251
• Yellow • • • • • • • •
•
Figure 4
200 °F /93 °C
Green
• ... • • • • .. • _. •
135'F/57°C
Orange
• •
•••• • •
• • •
PENDENT
(TY4251)
155°F/68°C
Red
1,2,5
•• ••
•$,08.5
•• • ••
.1, 2,5
175 °F /79 °C
Yellow
and
1,2,3,4,5,6,7
• • •
•••. • .
•
8.0
UPRIGHT
200 °F /93 °C
Green
•
•. • • • • • •
NPT
(TY4151)
286 °F /141 °C
Blue
1 "", 3v, 5"
2'
• •1'$,Q2i*, 5'" •"
360°F/182°C
Mauve
N/A • • •
135 °F /57°C
Orange
RECESSED
155 °F /68 °C
Red
PENDENT
1, 2, 3, 4, 5
WA
175 °F /79 °C
Yellow
(Y4251)•
Figure 5
200 °F /93 °C
Green
135°F/57°C
Orange
PENDENT
155 °F /68 °C
Red
8.0
(TY4951)
175 °F /79 °C
Yellow
1/2'
and
1,2,3,5
N/A
NPT
UPRIGHT
(TY1)
200 °F /93 °C
Green
286°F/141 °C
Blue
360 °F /182 °C
Mauve
Page 4 of 8
TFP151
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL).
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL).
3. Approved by Factory Mutual Research Corporation (FM).
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/03).
5. Approved by the City of New York under MEA 354 -01 -E.
6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31- 53- 428- 4444/Fax 31- 53- 428 - 3377).
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/05).
8. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C -UL Listed, the
sprinklers are UL and C-UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead Coated
Sprinklers are noted to be FM Approved, the sprinlers are FM Approved as Corrosion Resistant Sprinklers.
* Installed with Style 10 (1/2° NPT) or Style 40(3/4° NPT) 3/4° Total Adjustment Recessed Escutcheon, as applicable.
'* 150 °F /66 °C Maximum Ceiling Temperature.
""* Frame and deflector only. Listings and approvals apply to color (Special Order).
N/A: Not Available
TABLE A
LABORATORY LISTINGS AND APPROVALS
••••
•
•
•• ••
•
••••
•
•••
• •
•••
••••
••
•
••••
•
•
•
TFP151
5/811/4°
(15,91-6,4 mm)
FACE OF
SPRINKLER
FITTING
MOUNTING
SURFACE
CLOSURE
2-7/8' DIA.
(73,0 mm)
2-1/4' DIA.
(57,2 mm)
SERIES
TY-B
3/4° (19,1 mm)
1/4° (6,4 mm)
MOUNTING
PLATE
1 -1/4° (31,8 mm)
3/4° (19,1 mm)
FIGURE 5
SERIES TY-B RECESSED PENDENT SPRINKLER ASSEMBLY
WITH TWO -PIECE 3/4 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON
5.6 K- FACTOR, 1/2 INCH NPT
1
5/8 ±1/4°
(15,9±6,4 mm)
FACE OF
SPRINKLER
FITTING
MOUNTING
SURFACE
CLOSURE SERIES
TY-B
2 -7/8° DIA.
(73,0 mm)
2 -1/4° DIA.
(57,2 mm)
3/4° (19,1 mm)
1/4° (6,4 mm)
MOUNTING
PLATE
1/8°
(3,2 mm)
t
1 -5/16° (33,3 mm)
13/16° (20,6 mm)
FIGURE 6
SERIES TY-B RECESSED PENDENT SPRINKLER ASSEMBLY
WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT
STYLE 40 RECESSED ESCUTCHEON
8.0 K- FACTOR, 3/4 INCH NPT
Page 5 of 8
WRENCH RECESS
(END °B° USED FOR
8/4° NPT MODELS)
WRENCH RECESS
(END °A° USED FOR
1/2° NPT MODELS)
FIGURE 7
W -TYPE 6 SPRINKLER
WRENCH
WRENCH
RECESS
••. •
•••
• •
•
•
•• •
• • •
• •••• ^'' • ••
'ANN WRENCH.
..% .•
ENGAGEMENT
WI to SPRINKLER'
'WRENCHING AREA • •
• • ••••
• •• . FIiURE B. •••
W-TYPE 7 REC{ SEP
SPRINKLER WRENCH
•
•
•
•
•
•
•
•
•
•
•
••••
• •
••
•�
•
Page 6 of 8
Technical
Data
Approvals
UL and C -UL Listed.
FM, LPCB, VdS, and NYC Approved.
(Refer to Table A for complete approval
information including corrosion resis-
tant status.)
Maximum Working Pressure
175 psi (12,1 bar)
Discharge Coefficient
K = 2.8 GPM/ps1 (40,3 LPM/bar
K = 5.6 GPM /psi / (80,6 LPM/bar
K = 8.0 GPM/psi (115,2 LPM/bar
Temperature Ratings
Refer to Table A
Finishes
Sprinkler: Reessed Escutcheon: White
Coated, Chrome Plated, or Brass
Plated
Physical Characteristics
Frame Bronze
Button Brass /Copper
Sealing Assembly
Beryllium Nickel w/Teflont
Bulb Glass
Compression Screw Bronze
Deflector Copper
Bushing (K =2.8) Bronze
Operation
The glass Bulb contains a fluid which
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb, allowing the sprinkler to
activate and water to flow.
Design
Criteria
The Series TY B Pendent and Upright
Sprinklers are Intended for fire protec-
tion systems designed in accordance
with the standard installation rules rec-
ognized by the applicable Listing or
Approval agency (e.g., UL Listing is
based on the requirements of NFPA
13, and FM Approval is based on the
requirements of FM's Loss Prevention
Data Sheets). Only the Style 10 or 40
Recessed Escutcheon, as applicable,
is to be used for recessed pendent
installations.
Installation
The Series TY B Sprinklers must be
installed in accordance with the follow-
ing Instructions:
NOTES
Do not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be.present. The diameterof the
air bubble is approximately 1/16 inch
(1,6 mm) for the 135 °F /57°C to 3/32
inch (2,4 mm) for the 360 °F /182 °C
temperature ratings.
A leak tight 1/2 inch NPT sprinkler joint
should be obtained with a torque of 7
to 14 ft.lbs. (9,5 to 19,0 Nm). A maxi-
mum of 21 ft. lbs. (28,5 Nm) of torque
may be used to Install sprinklers with
1/2 NPT connections. A leak tight 3/4
inch NPT sprinkler joint should be ob-
tained with a torque of 10 to 20 ft.lbs.
(13,4 to 26,8 Nm). A maximum of 30
ft.lbs. (40,7Nm) of torque is to be used
to Install sprinklers with 3/4 NPT con-
nections. Higher levels of torque may
distort the sprinkler inlet and cause
leakage or impairment of the sprinkler.
Do not attempt to make -up for insuffi-
cient adjustment in the escutcheon
plate by under- or over - tightening the
sprinkler. Readjust the position of the
sprinkler fitting to suit
The Series TY -B Pendent and Up-
right Sprinklers must be installed in
accordance with the following instruc-
tions.
Step 1. Pendent sprinklers are to be
installed in the pendent position, and
upright sprinklers are to be installed in
the upright position.
Step 2. With pipe thread sealant ap-
plied to the pipe threads, hand tighten
the sprinkler into the sprinkler fitting.
Step 3. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
6 Sprinkler Wrench (Ref. Figure 7),
except that an 8 or 10 inch adjustable
Crescent wrench is to be used for wax
coated sprinklers. With reference to
Figures 1, 2, 3, and 4 the W -Type 7
Sprinkler Wrench or the adjustable
Crescent wrench, as applicable Is to
be applied to the wrench flats.
When installing wax . coated sprinklers
with the adjustable Crescent wrench,
additional care needs to be exercised
to prevent damage to the Wax coating
on the sprinkler wrench flats or frame
arms and, consequently, exposure of
bare metal to the corrosive environ-
ment. The jaws of the wrench should
be opened sufficiently wide to pass
over the wrench flats without damag-
TFP1 51
ing the wax coating. Before wrench
tightening the sprinkler, the jaws of the
wrench are to be adjusted to just con-
tact the sprinkler wrench flats. After
wrench tightening the sprinkler, loosen
the wrench jaws before removing the
wrench.
After installation, the sprinkler wrench
flats and frame arms must be in-
spected and the wax coating re-
touched (repaired) whenever the coat-
ing has been damaged and bare metal
is exposed. The wax coating on the
wrench flats can be retouched by gen-
tly applying a heated 1/8 inch diameter
steel rod to the areas of wax that have
been damaged, to smooth It back over
areas where bare metal is exposed.
NOTES
Only retouching of the wax coating ap-
plied to the wrench t14 FYI fram
arms is riergftt4d, and Cie „ etouching • •
is to be 12e/formed only atdhe time of •
the inmarsprtn Ter instafletiorf.
• The steel rpd, ould bq Lieated only;o • • •
the pointat which it can begin to milt •
the wax, grid 3pproprI to 1Pecautiorie ; • • •
need to b1f tM4n, whin trilling th ®• • •
heated rod, •in order te•prewent t ae
installer kerrnbteing burned •
if attem to retouch � coating • • • •
with corjrplele coverage ere unsuc- .
cessful, aeldi oma/ wax sandal ordergd • • •
in the form of a wax s'ip '(tlte end of
which is color coded). Only the correct
color coded wax Ls to be used, and
retouching of wrench flats and frame
arms is only permitted at the time of
initial sprinkler installation. With the
steel rod heated as previously de-
scribed, touch the rod to the area re-
quiring additional wax with the rod an-
gled downward, and then touch the
wax stick to the rod approximately
one -half Inch away from the area re-
quiring retouching. The wax will melt
and run down onto the sprinkler.
The Series TY -B Recessed Pendent
Sprinklers must be installed in ac-
cordance with the following instruc-
tions.
Step A. After installing the Style 10 or
40 Mounting Plate, as applicable, over
the sprinkler threads and with pipe
thread sealant applied to the pipe
threads, hand tighten the sprinkler into
the sprinkler fitting.
Step B. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
7 Recessed Sprinkler Wrench (Ref.
Figure 8). With reference to Figure 3 or
4, the W -Type 7 Recessed Sprinkler
Wrench is to be applied to the sprinkler
wrench flats.
Step C. After the ceiling has been in-
TFP151
stalled or the finish coat has been ap-
plied, slide on the Style 10 or 40 Clo-
sure over the Series TY B Sprinkler
and push the Closure over the Mount-
ing Plate until its flange comes in con-
tact with the ceiling.
Care and
Maintenance
The Series TY B Sprinklers must be
maintained and serviced in accord-
ance with the following instructions:
NOTES
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system that
it controls, permission to shut down the
affected fire protection system must be
obtained from the proper authorities
and all personnel who maybe affected
by this action must be notified.
Absence of an escutcheon, which is
used to cover a clearance hole, may
delay the time to sprinkler operation in
a fire situation.
Sprinklers that are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers must never be
painted, plated, coated or otherwise
altered after leaving the factory. Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
corrosive products of combustion, but
have not operated, should be replaced
If they cannot be completely cleaned
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
age to the sprinklers - before, during,
and after installation. Sprinklers dam-
aged by dropping, striking, wrench
twist/slippage, or the like, must be re-
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb. (Ref. Installation
Section).
Frequent visual inspections are rec-
ommended to be initially performed for
corrosion resistant coated sprinklers,
after the installation has been com-
pleted, to verify the integrity of the cor-
rosion resistant coating. Thereafter,
annual inspections per NFPA 25
should suffice; however, instead of in-
specting from the floor level, a random
sampling of close -up visual.inspec-
tions should be made, so as to better
determine the exact sprinkler condi-
tion and the long term integrity of the
corrosion resistant coating, as it may
be affected by the corrosive conditions
present.
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service in accordance with
local requirements and/or national
codes.
Limited
Warranty
Page 7of8
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship I when paid for and properly
installed and maintained under normal
use and Service. This warranty will ex-
pire ten c10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, Improper installation, corro-
sion, or which have not been Installed,
maintained, modified oareli tied in ac-
cordance witiskpplicabla'Sfandards OP • •; •
the Nationb? Fire PrototiAssocia- •
don, and , etandardew other...:.
Authorities.ldvimg Jurisdiction. Matg- •
vials foundJiy. Vco Fire to be• • • • •
defective•gligll be either•rspeired $r •
replaced, of Tyco Fire Products' sole'; • •.
option. Tf& Fif@ Prodyetb:llither as• • • •
sumes, Mir ENthorizes any person b • • . •
assume porst •any other obligation in •
connection withahe salea products pL •, ! •
parts of produpts. Tyco f re • Producls
shall not•gg tegponsible for sprinkles
design errors eintaurate br •
incomplete Informatioi upplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, INDIRECT,
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS' LI-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY IS
MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES EXPRESS OR
JMPLI D. INCLUDING WARRANTIES
OF MERCHANTABILITY AND FIT -
NFS4 F(R A PARTI(I!l AR PUR-
POSE
530
2.8K UPRIGHT (1 /21NPT)
TY1151
531
2.8K PENDENT (1 /2 1NPT)
TY1251
570
5.6K UPRIGHT (1/2NPT)
TY3151
571
5.6K PENDENT (1/2°NPT)
TY3251
590
8.0K UPRIGHT (3/4 °NPT)
TY4151
591
8.0K PENDENT (3 /4 °NPT)
TY4251
560
8.0K UPRIGHT (1/2NPT)
TY4851
561
8.0K PENDENT (1/21•PT)
TY4951
Page 8 of 8
Ordering
Procedure
P/N 57 XXX- X -tXXX
When placing an order, indicate the full
product name. Refer to the Price List
for complete listing of Part Numbers.
Contact your local distributor for avail-
ability.
Sprinkler Assemblies with NPT
Thread Connections:
Specify: (Specify Model/SIN), Stand-
ard Response, (specify K- factor),
(specify temperature rating), Series
TV-B (specify Pendent or Upright)
Sprinkler with (specify type of finish or
coating), P/N (specify from Table B).
. MODEIJSIN
1
4
3
9
7
6
8
SPRINKLER
NATURAL BRASS
WHITE POLYESTER
WHITE (RAL9O10)'
CHROME PLATED
LEAD COATED
WAX COATED
286°F/141 °C MAX.
WAX OVER LEAD
286°F /141 °C MAX.
TABLE B
PART NUMBER SELECTION
SERIES TY-B PENDENT AND UPRIGHT SPRINKLERS
Recessed Escutcheon:
Specify: Style (specify) Recessed Es-
cutcheon with (specify finish), P/N
(specify).
1/2° (15 mm)
Style 10
Chrome Plated
1/2' (15 mm)
Style 10
white Color
Coated
1/2° (15 mm)
Style 10
White RAL9010'
1/2° (15 mm)
Style 10
Brass Plated
3/4" (20 mm)
Style 40
Chrome Plated
3/4° (20 mm)
Style 40
White Color
Coated
3/4° (20 mm)
Style 40
Whte RAL9010'
3/4° (20 mm)
Style 40
Brass Plated
P/N 56-701-9-010
P/N 56 -701-4-010
P/N 56- 701 -3-010
P/N 56- 701 -2 -010
P/N 56-700-9-010
P/N 56-700-4-010
P/N 56- 700 -3-010
P/N 56- 700 -2 -010
• Eastem Hemisphere sales only.
Sprinkler Wrench:
Specify: W -Type 6 Sprinkler Wrench,
P/N 56- 000 - 6-387.
Specify: W -Type 7 Sprinkler Wrench,
P/N 56 -850 -4 -001.
135
155
175
200
286
360
TEMPERATURE
RATING
135 °F /57 °C
155 °F /68 °C
175 °F /79 °C
200 °F /93°C
286 °F /141 °C
360 °F /182 °C
• •
• • ••••
• • •
•
Eastatti HeTispherrbal4s Qnly.
•
••••
• •
••
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
•• •
•• •
• • •
• ••
••••
• • •
•• •• •• •
TFP1S1
• •
•
Wax Sti4tt: •:
(for retouching wrench. damaged • • • •
wax coating • • ••••
• •
Specify: ( Specfy coin lol r code •
Wax Stick for retouching 4specify tem-
perature rating) temperature rated Se-
ries TY B Sprinklers, P/N (specify).
• •
•
Black for 135 °F P/N 56-065-1-135
Red for 155 °F P/N 56 -065.1 -155
Yellow for 175 °F P/N 56 -065-1 -175
Blue for 200 °F and
286°F P/N 56 -065 -1 -286
NOTES
Each wax stick is suitable for retouch-
ing up to twenty -five sprinklers.
The wax used for 286 °F sprinklers is
the same as for 200°F sprinklers, and,
therefore, the 286°F sprinkler is limited
to the same maximum ceiling tempera-
ture as the 200 °F sprinkler (i.e.,
150 °F).
••
•
•
•
•
• •
tqcci I & Building
Products
Technical Services: Tel: (800) 381 -9312 / Fax: (800) 791 -5500
CENTRAL
Customer Service/Sales:
Tel: (215) 362 -0700 / (800) 523 -6512
Fax: (215) 362 -5385
Series EC -11 & EC-14 — 11.2 and 14.0 K- factor
Extended Coverage (Light and Ordinary Hazard)
Upright, Pendent, and Rec. Pendent Sprinklers
General
Description
The Series EC -11 and EC -14 Ex-
tended Coverage Upright and Pendent
Sprinklers are decorative glass bulb
sprinklers designed for use in light or
ordinary hazard occupancies. They
are intended for use in automatic
sprinkler systems designed in accord-
ance with standard installation rules
(e.g., NFPA 13) for a maximum cover-
age area of 400 ft (37,2 m as com-
pared to the maximum coverage area
of 130 ft (12,1 m for standard cover-
age sprinklers used in ordinary haz-
ard occupancies or 225 ft (20,6 m
for standard coverage sprinklers used
in light hazard occupancies.
The Series EC -11 and EC -14 Sprin-
klers feature a UL and C -UL Listing
that permits their use with unob-
structed or non - combustible ob-
structed ceiling construction as de-
fined and permitted by NFPA 13, as
well as a specific application listing for
use under concrete tees.
The Series EC -11 and EC -14 Ex-
tended Coverage Sprinklers have
been fire tested to compare their per-
formance to that of standard coverage
spray sprinklers. These tests have
shown that the protection provided is
equal to or more effective than stand-
ard coverage spray sprinklers.
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the "INSTALLER
WARNING" that provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. Improper handling and in-
stallation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
Page 1 of 8
Corrosion resistant coatings, where
applicable, are utilized to extend the
life of copper alloy sprinklers beyond
that which would otherwise be ob-
tained when exposed to corrosive at-
mospheres. Although corrosion resis-
tant coated sprinklers have passed the
standard corrosion tests of the appli-
cable approval agencies, the testing is
not representative of all possible cor-
rosive atmospheres. Consequently, it
is recommended that the end user be
consulted with respect to the suitability
of these corrosion resistant coatings
for any given corrosive environment.
The effects of ambient temperature,
concentration of chemicals, and
gas /chemical velocity, should be con-
sidered, as a minimum, along with the
corrosive nature of the chemical to
which the sprinklers will be exposed.
WARNINGS
The Series EC -11 and EC -14 Ex-
tended Coverage Sprinklers described
herein must be installed and main-
tained in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association, in addition to the
standards of any other authorities hav-
ing jurisdiction. Failure to do so may
impair the integrity of these devices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
relative to any questions.
• •
• • •...
Model /Sprinkler
Identification
Number
TY5137 - Upright, 11.2K
TY5237 - Pendent, 112K
TY6137 - Upright, 14.0K
TY6237 - Pendent,14.0K
TY5137 is a redesignation for C5137,
G1894, and S2510.
TY5237 is a redesignation for C5237,
G1893, and S2511.
TY6137 is a redesignation for C6137,
G1896, and S2610.
TY6237 is a redesignation for C6237,
G1895, and S2611.
APRIL, 2004 TFP22O
HAZARD
TYPE
TEMP.
UO D
BRASS ASS NATURAL
PLATED
••
PO`'YEST + F
••
• pikTED s
• • •
135 °F /57 °C
Orange
•
UGHT
UPRIGHT
K =11.2 (TY5137)
155 °F /68 °C
Red
2 ' l'Y'�
••••
• • •
•
175F/79°C
Yellow
• • •
I
PENDENT
K =11.2 (TY5237)
1, 2, 4 • • •
•
1, 4
,
°C
Refer to Table B for
K =14.0 (TY6237)
200 °F /93
Green
• •
•
286 °F /141 °C
Blue
UL and C -UL
Sensitivity Rating
135 °F /57 °C
Orange
and
REC. PENDENT
1, 2, 3, 4
°F °C
Refer to Table C for
K =11.2 (TY5237)
155 /68
Red
N/A
175'F/79°C
Yellow
FM
K =14.0 (TY6237)
Sensitivity Rating
With Style 30
1, 2, 4
Escutcheon
200°F/93°C
Green
286 °F /141 °C
Blue
UPRIGHT
135*F/57°C
Orange
K =11.2 (TY5137)
1, 2, 3,
4
155 F/68 C
Red
ORDINARY
K =14.0 (TY6137)
1, 2, 3, 4
175 °F /79 °C
Yellow
and
Refer to Table B for
PENDENT
2O0FI93°C
Green
1 2 4
UL and C-UL
K =11.2 (TY5237)
286 °F /141 °C
Blue
Sensitivity Rating
K =14.0 (TY6237)
and
REC. PENDENT
135 °F /57 °C
Orange
Refer to Table C for
FM
K=11.2 (TY5237)
K =14.0 (TY6237)
155 °F /68°C
Red
1, 2, 4
N/A
175 °F /79 °C
Yellow
Sensitivity Rating
With Style 40
Escutcheon
200 °F /93 °C
Green
Page 2 of 8
1 - Frame
2 - Button
3 - Sealing Assembly
4 - Bulb
5 - Compression Screw
6 - Deflector'
° Temperature rating is
indicated on deflector
" Pipe thread
connections per ISO
7/1 can be provided
on special request.
WRENCH
FLAT
1/2" (12,7 mm) J
NOMINAL MAKE -IN
UPRIGHT
3/4" **
NPT
2- 7/16"
(61,9 mm)
UPRIGHT &
PENDENT
FIGURE 1
SERIES EC -11 AND EC -14 EXTENDED COVERAGE SPRINKLE* • • •
11.2 K FACTOR (TY5137) UPRIGHT AND (TY5237) PENDENT • • •
14.0 K- FACTOR (TY6137) UPRIGHT AND (TY6237) PENDENT
PENDENT
ESCUTCHEON PLATE
SEATING SURFACE
•
CROSS
SECTION
TFP22O
••••
• •
••••
•
• ••• •
• • • •
•• •
•
SPRINKLERONISFl pee Nrtte I) •
•
NOTES:
1.Usted by Underwriters Laboratories, Inc. (UL).
2.Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL).
3. Approved by Factory Mutual Research Corporation (FM).
4. Approved by the City of New York under MEA 177 -03 -E.
5. Where Polyester Coated or Lead Coated Sprinklers are noted to be UL and C -UL Listed, the sprinklers are UL and C -UL Listed as
Corrosion Resistant Sprinklers.
'Frame and Deflector only. Listings and approvals apply to color (Special Order).
" Pendent Only.
N/A: Not Available
TABLE A, LABORATORY LISTINGS AND APPROVALS
•
• •
•
•
•
•
•
•
TFP22O Page 3 of 8
AREA STYLE
14x14 Up. or Pend.
14 x 14 Style 30 Recessed
14 x 14 Style 40 Recessed
16 x 16 Up. or Pend.
16 x 16 Style 30 Recessed
16 x 16 Style 40 Recessed
QR: Quick Response
SR: Standard Response
N/A: Not Applicable
Does not apply to Upright K =14.0
UGHT HAZARD ORDINARY HAZARD
135 °F 155 °F 175 °F 200 °F 286 °F 135 °F 155 °F 175 °F 200 °F 286 °F
- - - - - N
SR SR SR SR SR
SR SR SR SR N/A
SR SR SR SR N/A
QR* QR* QR* QR* QR* + SR SR SR SR SR
QR' OR* QR* QR' QR* SR SR SR SR N/A
N/A N/A N/A N/A N/A SR SR SR SR NIA
18 x 18 Up. or Pend. QR* OR* QR* QR* QR* SR SR SR SR SR
18 x 18 Style 30 Recessed QR* QR* QR* QR* QR* SR SR SR SR N/A
18 x 18 Style 40 Recessed N/A N/A N/A N/A N/A SR SR SR SR N/A
20 x 20 Up. or Pend. QR* QR* QR* SR* SR* SR SR • SR • S • SR •.SR
20 x 20 Style 30 Recessed QR* SR* OR* SR* SR* SR SR •
•st� • • SR . "NA
20 x 20 Style 40 Recessed N/A N/A N/A N/A N/A SR SR • • $6 • • SR • • • • i1A 4
•
• 4
4
• • • • •
•••• • •• .
...• .
TABLE B • • • • • • • 4
SENSITIVITY RATING FOR UL. AND C -UL LISTING OF SERIES EC -11 OR EC- 1.1.$9RSNKLERS •
(SEE TABLE D FOR PERMITTED K- FACTOR/AREA COMBINATIONS) : ••••
•
••••
•
AREA STYLE
14 x 14 Up. or Pend.
14 x 14 Style 30 Recessed
14 x 14 Style 40 Recessed
16 x 16 Up. or Pend.
16 x 16 Style 30 Recessed
16 x 16 Style 40 Recessed
QR: Quick Response
SR: Standard Response
N/A: Not Applicable
* Pendent Only
•• • • ••• •
UGHT HAZARD ORDINARY HAZARD' • •'
135 °F 155 °F 175 °F 200 °F 286 °F 135 °F 155 °F 175 °F 200 °F 286 °F
— - - - - t/ SR SR SR
— NI/ A N/A N/A N/A N/A
— N/A N/A N/A N/A NIA
QR* QR* N/A N/A N/A SR SR SR SR SR
QR QR N/A N/A N/A N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
18 x 18 Up. or Pend. QR* QR* N/A N/A N/A SR SR SR SR SR
18 x 18 Style 30 Recessed QR QR N/A N/A N/A N/A N/A N/A N/A N/A
18 x 18 Style 40 Recessed N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
20 x 20 Up, or Pend. QR* QR* N/A N/A N/A SR SR SR SR SR
20 x 20 Style 30 Recessed QR QR N/A N/A N/A N/A N/A N/A N/A N/A
20 x 20 Style 40 Recessed N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
TABLE C
SENSITIVITY RATING FOR FM APPROVAL OF SERIES EC -11 OR EC -14 SPRINKLERS
(SEE FM LOSS PREVENTION DATA SHEET 2 -8N FOR PERMITTED K- FACTOR/AREA COMBINATIONS)
•
•
••
•
.•
•
•
• •••
• •
••••
• •
•
Page 4 of 8
Technical
Data
Approvals
UL and C - Listed. FM. Approved.
(Refer to Table A. for complete approval
information including corrosion resis-
tant status. The approvals apply to the
service conditions indicated in the De-
sign Criteria- section.)
Maximum Working Pressure
175 psi (12,1 bar)
Pipe Thread Connection
3/4 Inch NPT
Discharge Coefficients
K = 11.2 GPM/psili2
(161,3 LPM/bar
K =14.0 GPM/psit /2
(201,6 LPM/barlI
Temperature Ratings
135 ° F /57°C to 286
Finish
Sprinkler: Refer to Table A
Recessed Escutcheon: White Coated,
Chrome Plated, and Brass Plated
Physical Characteristics
Frame Bronze
Button Bronze
Sealing Assembly
Beryllium Nickel w/Teflon
Bulb Glass (3 mm dia.)
Compression Screw
Deflector Bronze
Brass
Patents
U.S.A. Patent Numbers 5,366,022;
5,579,846; 5,584,344; 5,609,211;
5,862,994; and 5,865,256 are appli-
cable to the Series EC -11 and EC14
Sprinklers. Other patents are pending
with regard to other design features.
Operation
The glass bulb contains a :fluid• which
expands when exposed to heat When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass bulb, which then allows the sprin-
kler to activate and flow water.
Design
Criteria
The Series EC -11 and EC -14 Ex-
tended Coverage Sprinklers must only
be installed in accordance with the ap-
pitat \e \A- Zat ¶U� VAttg oc F M
Approval requirements as indicated
below. Only the Style 30 or 40 Re-
cessed Escutcheon is to be used for
recessed installation, as applicable
(Ref: Table A; B,' and C)..
UL arid: C-UL Listing
Requirements
1; The Series fC�11 anal EC-14 Spein-
.ktersy be used for the coverage
areas shown In Table D, based on
maintaining the minimum:specified
ftgw rate as -a function -of coverage
area Tand bazar f 9roup:for aw.ot the.
sprinklers. in the design;area.
2. With respect t4 heat se ,sJtiriity, .the
Series EC-11 and EC 14Sprinklers
are permitted toilet:m.0d with unob-
structed or .non - combustible ob-
structed ceiling construction as de-
fined and permitted by NFPA 13. For
example:
Unobstructed, combustible or non-
combustible, ceiling construction
with as deflector to ceiling/roof deck
distance of 1 to 12 inches (28 to 300
mm).
Obstructed, noncombustible, ceiling
construction with a deflector location
below structural members of 1 to 6
inches (25 to 150 mm) and a:maxi
murk' deflector to ceilingtroof deck
distance of 22 inches (550 mm).
3. The minimum allowable'spacing be-
tween the Series FC:-11 and EC-14
Sprinklers, to prevent cold solder-
ing, is 8 feet (2,4 m) forupright sprin-
klers and 9 feet (2,7 m) for pendent
sprinklers.
4. The Series EC -11 and EC-14 Sprin-
klers are to be installed in accord -
ance with all other requirements of
NFPA 13 for extended coverage W-
right and pendent sprinklers.
UL and C-UL Specific Application
Listing Regirireit ants For
installation: Under Concrete Tees
The Series; ECM and EC44 Ex-
tended Coverage Upright Sprinklers
(TN5137 & TY6137) have , a tit, and
C-i1L Specifo Application Listing for
use, under concrete tees when in-
stalled as follows:
1. The sterns of the concrete tee con -
svu Lion must spaced at less than
c et.(2,3: m); on. comer but more.
than 3' feet (M9 m) on center. The
depth of the Ooncrete teesmurst not
exceed '30 inches: (762 m)..The
maxiinuin, permitted : concr m ete tee
• enger .3 •.1ea,'t:(9,8 err); fip■ever,
Where :the :concrete tee. :length ex-
tiaids32%eei0,8 m), tocticotobus
tible baffles, equal in height to the
depth of the tees, can be installed so
that the space between the tees
TFP22O
does not exceed 32 feet (9,8 m) in
length.
2. The sprinkler. deflectors are to be
located in a horizontal plane at or
above 1 inch (26,4 mm) below the
bottom of the concrete tee stems.
3. When the sprinkler deflectors are
located , higher than a horizontal
plane 1 inch (251,4 mm) beneath the
bottorn of the concrete tee stems,
the. ..Obstruction t0 sprinkler dis-
.Charge criteria requirements of
NFPA 13 for extended coverage up-
right sprinklers applies.
FM :Approval
Requirements ...
The .Series . ECG11 • c: AC -14 FiS:.. •
.tende•ouezage Sprinklers are to be •
installed%) aceordans8 viZth;the apppli - .
:cable:FFatttztCAuttiaa Criss Preven8611''
Data Skset#erlimited use in buildiljgg. •;
of specific ref constrestior ► and forthe •
protectibp afArtain ititt ordinary..
hazard iggq-kiptage . non -fly ..•
mable or:oorrrhustibleolrqq ).occup8n- ...
cies. ki?drrrtation provided h the FM' •
Loss Prpe .Data Sh ets relate to, • .
but are i o t l to, h y d r vUO d e s ? . ' .
ceWng rtlgpe. and • obslz�tions, mini
mum afl�.maZimum alloy le sp$L - • •
ing, and deflector -to eej(jng distance.
instaflation
The Series EC -11 and EC-14 Sprin-
klers must be. installed in accordance
with the following instructions:
NOTES
Do not install any bulb type sprinkler if
the bulbar creaked ofthere is a loss of
liquid from the bulb. With the sprinkler
held horizontally a small air bubble
shouldhepresent The diameterof the
air bubble is approximately. 1/16 inch
(1,6. mnei) for the:135. °F/57 °C to 3/32
inch (2,4 tam 1 for the 286°F/141°C
temperature ratings.
A leak tight 3/4inch NPT sprinklerjoint
should be tobtairied, with a torque of 10
m 20 fl. bs. (13,4 to 26,8 Nm). A maxi -
mum' of 30 ft lbs.:(40.7 Nm) of torque
is to be used to -Install sprinklers.
Higher levels of tOrgfie may distort the
sprinkler". inlet with. consequent leak-
age or impairment of the sprinkler.
Do not attempt to compensate for in-
sufl3cient adjustrnent in an Escutcheon
Plate by under- or over- tightening the
Sprinkler: Readjust. the position of the
sprinklerftting.to suit.
Step A t .The sprinldec must be Installed
with the deflector parallel to the mount-
ing surface. Pendent sprinklers must
be installed in the pendent position,
TFP22Q
_
1/2±1/8"
(12,7±3,2 mm)
FACE OF
SPRINKLER
FITTING
f \
MOUNTING
SURFACE
CLOSURE
2-7/8" DIA.
(73,0 mm)
2-1/4° DIA.
(57,2 mm)
1/2° (12,7 min)
1/4° (6,4 mrn)
MOUNTING
PLATE
1/8°
(3,2 mm)
1-3/8" (34,9 mm)
1- 1/8°'(28,6 mm)
ROME
SERIES EC-11 AND €f. --14 Rgogsagg PENDENT SPRINKLER ASSEMBLY
WITH TWO -PIECE 1/21NCH-TOTAL ADJUSTMENT
STYLE 30 RECESSED ESCUTCHEON
5/8±1/4"
(15,9±6,4 mm)
FACE OF
SPRINKLER
FITTING
I _ 2-7/8° DIA.
(73,0 mm)
2 -1/4° DIA.
(57,2 mm)
f
MOUNTING
SURFACE
CLOSURE
MOUNTING
PLATE
3/4° (19,1 mm)
1/4" (6,4 mm)
1/8°
( mm)
1 -3/8° (34,9 mm)
7/8° (22,2 mm)
FIGURE 3
SERIES EC-11 AND EC-I4 RECESSED PENDENT SPRINKLER ASSEMBLY
WITH TWO-PIECE .314:INCH TOTAL ADJUSTMENT
STYLE 40 RECESSED ESCUTCHEON
Pogo 5eiS
°FITTING SIDE°
TOWARDS SPRINKLER
FITTING
F/GURE.4
. W -TYPE &SPRINKLER
WRENCH
WRENCH
RECESS
(END °A")
and upright sprinklers must be in-
stalled in the upright position.
Step 2. After installing the Style 30 or
40 mounting plate (or other escutch-
eon, as applicable) over the sprinkler
pipe threads and with pipe thread
sealant applied to the pipe threads,
hand tighten the sprinkler into the
sprinkler fitting.
Step 3. Wrench tighten upright or pen-
dent sprinklers using only the W -Type
3 (End A) Sprinkler Wrench. Wrench
tighten the recessed pendent sprin-
klers using only the W -Type 22 Sprin-
kler Wrench. The wrench recess of the
applicable sprinkler wrench (Ref. Fig-
ure 4 and 5) is to be applied to the
sprinkler wrench flats (Ref. Figure 1).
•
•
••
•
••
•
•
• •
••
•
•
••
•
•
Page 6 of 8
DESCRIPTION AREA
TY5137 (K=11.2) UPRIGHT
TY5237 (K=11.2) PENDENT
TY6137 (K=14.0) UPRIGHT
TY6237 (K =14.0) PENDENT
1 ft. = 0.3048 m
1 ft = 0.093 m
1 gpm = 3.785 Ipm
1 psi = 0.06895 bar
1 gp = 40.74 mm/min
14x 14
16 x 16
18 x 18
20x20
14x 14
16x16
18x 18
20 x 20
14 x 14
16x16
18 x 18
20 x 20
14 x 14
16x16
18x18
20 x 20
LIGHT HAZARD
0.10 GPM/Fr
GPM PSI
30 7.2
33 8.7
40 12.8
30 7.2
33 8.7
40 12.8
N/A N/A
N/A N/A
N/A N/A
N/A N/A
37 7.0
37 7.0
40 8.2
GROUP
ORDINARY HAZARD
015 GPM/FT
GPM
30
39
49
60
30 7.2
39 121
49 19.1 ••••••
60 20.7 ••••
39
49
60
39
49
60
PSI GPM PSI
7.2
12.1
19.1
28.7
• •
•• ••
7.8
12.3 • •
18.4 • •
7.8
12.3
18.4
• •
• • •
•. •
•
• • •
•• •
FLOW CRITERIA FOR UL AND C-.IIL LISTING OF SERIES EC 14 AND EC-14 SPRINKLERS
GROUP II
ORDINARY HAZARD
0.20 GPM/FT
39 12.1
51••••20.7
65,•••33.7
80. • • .57.0
• • •
•• •
39 • 12.1
51 20.7
Be e • 433.7
8b • 57.0
••••
• • •
•• •
51 • 13.3
65••••21.6
8t1.
• ••.
• • •
•• •--
51 13.3
65 21.6
80 32.7
••
• •
•
• •
•
• •
•
•
•
•
•
•
Care and
Maintenance
The Series EC -11 and EC -14 Sprin-
klers must be maintained and serviced
in accordance with the following in-
structions:
NOTE
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system • that
it controls, permissionto shut down the
affected fire protection systems must
be obtained from the proper authori-
ties and all personnel who may be
affected by this action must be notified.
Sprinklers that are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers . rnust never be
painted, plated, coated, or otherwise
altered after leaving the factory. Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
age to the sprinklers - before. during,
and after installation. Sprinklers dam -
aged by dropping, striking, wrench
twistielippage, or the like, must be re-
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb. (Ref. Installation
Section):
Frequent visual inspections are rec-
ornrnended to be initially performed for
corrosion resistant coated sprinklers,
after the installation. has been com-
pleted, to verify the integrity of the cor-
rosion resistant coating. Thereafter,
annual. 'inspections per NFPA 25
should suffice; however, instead of in-
specting from the floor level a.random
sampling: of close -up visual inspec-
tions should. be made, so as to better
determine the exact sprinkler condi-
ti0.n and the.Iong term integrity of the
corrosion. resistant coating, as it may
be affected by the corrosive conditions
present.
The owner Is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
TFP22O
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition tp. the standards of any other
authorities having . jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative
to any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service.
•••
•
• •
•••
•
•••
•
••
• •
•••
••••
•
••
••••
•
••••
•
TFP220
Limes
Warranty
Products manufactured_ by Tyco Fire
Products are -warranted: seta/ 'to :the
original Buyer for ten'.(1O) year
against defects in material and work
manship when, paid :for, and properly
installed and Maintained bridal frontal .
use and service. This Warranty Wilt ex
pire ten (10) years from date of ship-
ment by Tyco Fire Products; No..war-
ranty Is given for products or
components manufactured by compa-
nies not affiliated by ownership. with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro
sion or which have not been:installed,
maintained; modified or repaired In,
cordance with applicable Standards.of
the National Fire ProterAiort Associa.-
don, and/or the standard& Of Any other
Authorities Having Jurisdiction. Mate-
rials found by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Five Products' sole
option. Tyco Fire Produots-neither as-
sumps, nor authorizes any person to
assume for it, any other obligation in
connection with the sale of productsor
parts of products. Tyco Fire Products
shall not be responsible 'for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE; IN CON-
TRACT; TORT, STRICT LIAEILITY QR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, 'INDIRECT, .
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO -EVENT
SHALL TYCO FIRE PRODUCTS' LI-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY IS
WOE IN. LIEU OF ANYY 4 NDD ALL
OTHER WA RRA NTIES EXPRESS OR
BIEWILINALLNillialtialiaringfi
OF M4REsAN. ?m IT Y AND FIT-
NESS FORA PART ICULAR P -
POSE
WhariPlaqing arlder nd' the full
'product= Vie: P ise:: 000111 the
Spru ter ldentitication Water (SIN),
quartttty, and temperature rating. Refer
to the Price List for complete listing of
Part Nlmbers,
Contact your local distributor for avail -
ability.
SprInlOvrissoinblies with NPT
Thread Connection -
tor ((specify temperat i e rat ,
(specIty :Pendent:or Upright) Extended
Coverage Sprinkl (specify fy fin-
ish), P/N (specify -
fro Table
applicable).
Recessed .Escutcheon:
Specify: Style- (specify. 30 or 40). Re-
cessed Esautcheon with (specify fin -
ish), P/N ( specify).
Style 3d Recessed Escutcheon
Chrome P lated PSN 16-705 -8-071
white Color Coated PSN56- 705 -4011
white (RAL8010)• PSN $6-705 -3 -011
Brass Plated PSN 56- 1'05 -2 -011
Style 40 Recessed Escutcheon
Chrome prated PSN 56-700-9-010
White Color Coated PSN 56- 700-4 -010
White (RAL901o)• PSN 56- 700 -3-010
Brass Plated PSN 56- 700.2 -010
•Fastem .Hemisphere sates only.
Spunkier Wrench:
Specify: W -Type 3 Sprinkler Wrench,
• P/N 56 -895 -1 -001
Specify:. W -Type 22 Recessed Sprin-
kler Wrench, P/N 56- 665 -7-001
Palge z of
. - ESC
AAA = 893 (for TV5237
iC11 Pendent)
AAA =894 (for TY5137
K112 Upright)
AAA = 895 (for TY6237
K14.0 Pep/38M
AMC= 88116 jfor TY6137 •
• • Kt4A Updight) •:
.. •
B =1 Vo Natural Bras)
B = a White 1I4:4001 O))*
.13 = 4'(fonfhjte PayeStr)
B =r((olttad Cc d •.
B =9•(folthrome l 1dtedj
•
CCt =135:(for 136
CCU =1.55f(for 155 °C)
CCC :175 (for 176 rMC)
CCC = 200 (for 200V/93
..
..
. .
•
..
•
..
•
*Eastern Hemisphere sales only.
TABLE E
PART NUMBERS FOR
EC-11 AND EC-14 SPRINKLERS
•
•
•
•
1•••
•
•
I..
•
•
•
...
•
...
•
Page 8 of 8
•
• •
.. ..
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
... •
• • •
. . •
Tf P220
. . • •
• •
• • ••••
• • ▪ • •
. . • . •
• •
.. •
• •
•••• .. • • •
• •
•••• • • .
• •
• .. •
•
• • ••••
• • ▪ •••• ▪ • •
•
• •
.. •
• ••• • •
• • •
two Fire & Building
Products
Technical Services: Tel: (800) 381 -9312 / Fax: (800) 791 -5500
CENTRAL
Customer Service/Sales:
Tel: (215) 362 -0700 / (800) 523 -6512
Fax: (215) 362 -5385
Series TY -B --- 5.6 K- factor
Horizontal and Vertical Sidewall Sprinkar
Standard Response, Standard Coverage
General
Description
The Series TY-B, 5.6 K- factor, Horizon-
tal and Vertical Sidewall Sprinklers de-
scribed in this data sheet are standard
response - standard coverage, deco-
rative 5 mm glass bulb type spray
sprinklers designed for use in light and
ordinary hazard, commercial occupan-
cies such as banks, hotels, shopping
malls, etc. They are designed for instal-
lation along a wall or the side of a beam
and just beneath a smooth ceiling.
Sidewall sprinklers are commonly
used instead of pendent or upright
sprinklers due to aesthetics or building
construction considerations, where
piping across the ceiling is not desir-
able.
The recessed version of the Series
TY-B Horizontal Sidewall Sprinkler is
intended for use in areas with a fin-
ished wall. It uses a two -piece Style 10
Recessed Escutcheon. The Recessed
Escutcheon provides 1/2 inch (12,7
mm) of recessed adjustment or up to
3/4 inch (19,1 mm) of total adjustment
from the flush sidewall position. The
adjustment provided by the Recessed
Escutcheon reduces the accuracy to
which the fixed pipe nipples to the
sprinklers must be cut.
Corrosion resistant coatings, where
applicable, are utilized to extend the
life of copper alloy sprinklers beyond
that which would otherwise be ob-
tained when exposed to corrosive at-
mospheres. Although corrosion resis-
tant coated sprinklers have passed the
standard corrosion tests of the appli-
cable approval agencies, the testing is
not representative of all possible cor-
rosive atmospheres. Consequently, it
is recommended that the end user be
consulted with respect to the suitability
of these coatings for any given corro-
sive environment. The effects of ambi-
ent temperature, concentration of
chemicals, and gas /chemical velocity,
should be considered, as a minimum,
Page 1 of 6
along with the corrosive nature of the
chemical to which the sprinklers will be
exposed.
WARNINGS
The Series TY-B Sprinklers described
herein must be installed and main-
tained in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association, in addition to the
standards of any other authorities hav-
ing jurisdiction. Failure to do so may
impair the integrity of these devices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
relative to any questions.
Model /Sprinkler
Identification
Numbers
TY3351 - Horizontal
TY3451 - Vertical
Technical
Data
Approvals
UL and C -UL Listed.
FM, LPCB, and NYC Approved.
(Refer to Table A for complete approval
information including corrosion resis-
tant status)
Maximum Working Pressure
175 psi (12,1 bar)
Discharge Coefficient
K = 5.6 GPM/psi (80,6 LPM/barl /
Temperature Ratings
Refer to Table A
JANUARY, 2003
•
•••••
•
••••
• •
• • •
•• •
•
Finishes
Sprinkler: Refer to Table A
Recessed Escutcheon: White Coated,
Chrome Plated, and Brass Plated
Physical Characteristics
Frame Bronze
Button Brass /Copper
Sealing Assembly
Beryllium Nickel w/Teflont
Bulb Glass
Compression Screw Bronze
HSW Deflector Bronze
VSW Deflector Copper
Patents
U.S.A. Patent Number 5,810,263 and
UK Patent Number 2,347,624 may be
applicable to the Series TY-B Horizon-
tal Sidewall Sprinkler.
TFP161
•:
••
•
•
•
•
•
Page 2 of 6
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL) for use in Light and Ordinary Hazard Occupancies at a 4 to 12 inch (100 to 300 mm)
top of deflector to ceiling distance.
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL) for use in Ught and Ordinary Hazard Occupancies at a 4 to 12
inch (100 to 300 mm) top of deflector to ceiling distance.
3. Approved by Factory Mutual Research Corporation (FM) for use in Ught Hazard Occupancies at a 4 to 12 inch (100 to 300 mm)
top of deflector to ceiling distance.
4. Approved by the Loss Prevention Certification Board (LPCB) at a 4 to 6 inch (100 to 150 mm) deflector to ceiling distance.
5. Listed by Underwriters Laboratories, Inc. (UL) for use In Light and Ordinary Hazard Occupancies.
6. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL:) for use in Ught and Ordinary Hazard Occupancies.
7. Approved by Factory Mutual Research Corporation (FM) for use in Ught Hazard Occupancies.
8. Approved by the Loss Prevention Certification Board (LPCB).
9. Approved by the City of New York under MEA 354 -01 -E.
10. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C -UL Listed,
the sprinklers are UL and C -UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead
Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as Corrosion Resistant Sprinklers.
* Instaled with Style 10 (1 /2° NPT) 3/4" Total Adjustment Recessed Escutcheon.
** 150 °F /66 °C Maximum Ceiling Temperature.
* ** Frame and deflector only. Listings and approvals apply to all colors (Special Order).
Operation
The glass Bulb contains a fluid which
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb, allowing the sprinkler to
activate and water to flow.
TABLE A
LABORATORY LISTINGS AND APPROVALS
Design
Criteria
The Series TY B Horizontal and Verti-
cal Sidewall Sprinklers are intended
for fire protection systems designed in
accordance with the standard installa-
tion rules recognized by the applicable
Listing or Approval agency (e.g., UL
Listing is based on the requirements of
NFPA 13, and FM Approval is based
on the requirements of FM's Loss Pre-
vention Data Sheets). Only the Style
10 Recessed Escutcheon is to be used
for recessed horizontal installations.
TFP161
SPRINKLER FINISH (See Note 10)
K
TYPE
TEMP.
BULB
LIQUID
NATURAL
BRASS
CHROME
PLATED
WHITE***
POLYESTER
LEAD
COATED
WAX
COATED
WAX OVER
LEAD COATED
5.6
1/2°
NPT
HORIZ.
SIDEWALL
(TY3351)
135 °F /57°C
Orange
1,2,3,4,9
1,2,3,9
1,2,3,9
1,2,3,9
••••
I 1"" = 9'tt,'3ff 9**
155 °F /68 °C
Red
175 °F /79 °C
Yellow
200 °F /93 °C
Green
286 °F /141 °C
Blue
1** ' 2; *, 3* r 9 **
•
•
360 °F /182 °C
Mauve
1, 2, 4, 9
• • • N/A • • ' •
RECESSED
HORIZ.
SIDEWALL
(TY3351p
Figure 3
135 °F /57°C
Orange
1, 2, 3, 4, 9
--
•
•
• • • •
• • • •
WA • • • •
" '
• • • •
• • • • • •
- -
155 °F /68 °C
Red
175F/79°C
Yellow
200 °F /93 °C
Green
5.6
1/2"
NPT
VERTICAL
SIDEWALL
(TY3451)
Installed
Pendent
or
UPNght
135 °F /57 °C
Orange
5, 6, 7, 8, 9
5, 6, 7, 9
• • • • •
•
5 7, 2 •
• • •
• • •
- _ • -
•5 Q
• • • • • •
155°F/68°C
Red
175 °F /79 °C
Yellow
200 °F /93 °C
Green
286 °F /141 °C
-
Blue
5**, 6 * *, 7 * *, 9**
5 * *, 6 * *, 7* *, 9 **
360 °F /182 °C
Mauve
5, 6, 8, 9
N/A
Page 2 of 6
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL) for use in Light and Ordinary Hazard Occupancies at a 4 to 12 inch (100 to 300 mm)
top of deflector to ceiling distance.
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL) for use in Ught and Ordinary Hazard Occupancies at a 4 to 12
inch (100 to 300 mm) top of deflector to ceiling distance.
3. Approved by Factory Mutual Research Corporation (FM) for use in Ught Hazard Occupancies at a 4 to 12 inch (100 to 300 mm)
top of deflector to ceiling distance.
4. Approved by the Loss Prevention Certification Board (LPCB) at a 4 to 6 inch (100 to 150 mm) deflector to ceiling distance.
5. Listed by Underwriters Laboratories, Inc. (UL) for use In Light and Ordinary Hazard Occupancies.
6. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL:) for use in Ught and Ordinary Hazard Occupancies.
7. Approved by Factory Mutual Research Corporation (FM) for use in Ught Hazard Occupancies.
8. Approved by the Loss Prevention Certification Board (LPCB).
9. Approved by the City of New York under MEA 354 -01 -E.
10. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C -UL Listed,
the sprinklers are UL and C -UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead
Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as Corrosion Resistant Sprinklers.
* Instaled with Style 10 (1 /2° NPT) 3/4" Total Adjustment Recessed Escutcheon.
** 150 °F /66 °C Maximum Ceiling Temperature.
* ** Frame and deflector only. Listings and approvals apply to all colors (Special Order).
Operation
The glass Bulb contains a fluid which
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb, allowing the sprinkler to
activate and water to flow.
TABLE A
LABORATORY LISTINGS AND APPROVALS
Design
Criteria
The Series TY B Horizontal and Verti-
cal Sidewall Sprinklers are intended
for fire protection systems designed in
accordance with the standard installa-
tion rules recognized by the applicable
Listing or Approval agency (e.g., UL
Listing is based on the requirements of
NFPA 13, and FM Approval is based
on the requirements of FM's Loss Pre-
vention Data Sheets). Only the Style
10 Recessed Escutcheon is to be used
for recessed horizontal installations.
TFP161
TFP161 Paige 3 of 6
Installation
The Series TY-B Sprinklers must be
installed in accordance with the follow-
ing instructions:
NOTES
Do not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1/16 inch
(1,6 mm) for the 135 °F /57°C to 3/32
inch (2,4 mm) for the 360 °F /182 °C
temperature ratings.
A leak tight 1/2 inch NPT sprinkler joint
should be obtained with a torque of 7
to 14 ft.lbs. (9,5 to 19,0 Nm). A maxi-
mum of 21 ft. lbs. (28.5 Nm) of torque
may be used to install sprinklers with
1/2 NPT connections. Higher levels of
torque may distort the sprinkler inlet
and cause leakage or impairment of
the sprinkler.
Do not attempt to make -up for insuffi-
cient adjustment in the escutcheon
plate by under- or over - tightening the
sprinkler. Readjust the position of the
sprinkler fitting to suit.
The Series TY -B Horizontal and Ver-
tical Sidewall Sprinklers must be in-
stalled in accordance with the follow-
ing instructions.
Step 1. Horizontal sidewall sprinklers
are to be installed in the horizontal
position with their centerline of water-
way perpendicular to the back wall and
parallel to the ceiling. The word "TOP"
on the Deflector is to face towards the
ceiling.
Vertical sidewall sprinklers are to be
installed in the pendent or upright po-
sition with the arrow on the Deflector
pointing away from the wall.
Step 2. With pipe thread sealant ap-
plied to the pipe threads, hand tighten
the sprinkler into the sprinkler fitting.
Step 3. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
6 Sprinkler Wrench (Ref. Figure 4),
except that an 8 or 10 inch adjustable
Crescent wrench is to be used for wax
coated sprinklers. With reference to
Figure 1 or 2, the W -Type 6 Sprinkler
Wrench or the Crescent wrench, as
applicable, is to be applied to the
wrench flats.
When installing wax coated sprinklers
with the adjustable Crescent wrench,
additional care needs to be exercised
to prevent damage to the wax coating
on the sprinkler wrench flats or frame
arms and, consequently, exposure of
bare metal to the corrosive environ-
ment. The jaws of the wrench should
1 - Frame
2 - Button
3 - Sealing
Assembly
4 - Bulb
5 - Compression
Screw
6 - Deflector
1- 13/16"
(46,0 mm)
2 -7/8 DIA.
(73,0 mm)
9/16°
CENTERLINE
OF SPRINKLER
WATERWAY
(14,3 mm)
'1
�s !Rii11 %Ill ill911��
7/16' • ••••
(11,1 mm) • .,, •
NOMINAL • • •
MAKE -IN • •
• •
1-1/2° • •• • •
(38,1 mm)
STYLE 10 —
RECESSED
ESCUTCHEON
WRENCH
FLATS •
• •
••
2-3/16'
(55,6 mm)
.I
P R I
3 1
1/2 " ** •••• •
• NPT ••••
•
• •••
• • •
• • •
•
•• •
• •
•
• ••
••••
• • •
•• •
•
• •• •
• •
• •• •
• •••
• • •
•• •
ESCUTCHEON
--- PLATE SEATING
SURFACE
* Temperature rating is indicated on deflector or adjacent to orifice seat on frame.
**Pipe thread connections per ISO 7/1 can be provided on special request.
FIGURE 1
5.6 K- FACTOR STANDARD RESPONSE
SERIES TY-B HORIZONTAL SIDEWALL (TY3351) SPRINKLERS
be opened sufficiently wide to pass
over the wrench flats without damag-
ing the wax coating. Before wrench
tightening the sprinkler, the jaws of the
wrench are to be adjusted to just con-
tact the sprinkler wrench flats. After
wrench tightening the sprinkler, loosen
the wrench jaws before removing the
wrench.
After installation, the sprinkler wrench
flats and frame arms must be in-
spected and the wax coating re-
touched (repaired) whenever the coat-
ing has been damaged and bare metal
is exposed. The wax coating on the
wrench flats can be retouched by gen-
tly applying a heated 1/8 inch diameter
steel rod to the areas of wax that have
been damaged, to smooth it back over
areas where bare metal is exposed.
NOTES
Only retouching of the wax coating ap-
plied to the wrench flats and frame
arms is permitted, and the retouching
is to be performed only at the time of
the initial sprinkler installation.
The steel rod should be heated only to
the point at which it can begin to melt
the wax, and appropriate precautions
need to be taken, when handling the
•
•
•
•
Page 4 of 6
heated rod, in order to prevent the
installer from being bumed.
If attempts to retouch the wax coating
with complete coverage are unsuc-
cessful, additional wax can be ordered
in the form of a wax stick (the end of
which is color coded). Only the correct
color coded wax is to be used, and
retouching of wrench flats and frame
arms is only permitted at the time of
initial sprinkler installation. With the
steel rod heated as previously de-
scribed, touch the rod to the area re-
quiring additional wax with the rod an-
gled downward, and then touch the
wax stick to the rod approximately
one -half inch away from the area re-
quiring retouching. The wax will melt
and run down onto the sprinkler.
The Series TY -B Recessed Horizon-
tal Sidewall Sprinklers must be in-
stalled in accordance with the follow-
ing instructions.
Step A. Recessed horizontal sidewall
sprinklers are to be installed in the
horizontal position with their centerline
of waterway perpendicular to the back
wall and parallel to the ceiling. The
word "TOP" on the Deflector is to face
towards the ceiling.
Step B. After installing the Style 10
Mounting Plate over the sprinkler
threads, hand tighten the sprinkler into
the sprinkler fitting.
Step C. Tighten the sprinkler into the
sprinkler fitting using only the W -Type
7 Recessed Sprinkler Wrench (Ref.
Figure 5). With reference to Figure 1,
the W -Type 7 Recessed Sprinkler
Wrench is to be applied to the sprinkler
wrench flats.
Step D. After the ceiling has been in-
stalled or the finish coat has been ap-
plied, slide on the Style 10 Closure
over the Series TY-B Sprinkler and
push the Closure over the Mounting
Plate until its flange comes in contact
with the ceiling.
ESCUTCHEON
PLATE SEATING
SURFACE
1 /2° ••
NPT
(55,6 mm) 1
1-1/2°
(38,1 mm)
SHOWN
PENDENT
Care and
Maintenance
7/16°
(11,1 mm)
NOMINAL
MAKE -IN
WRENCH
FLATS
The Series TY-B Sprinklers must be
maintained and serviced in accord-
ance with the following instructions:
NOTES
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system that
it controls, permission to shut down the
affected fire protection system must be
obtained from the proper authorities
and all personnel who may be affected
by this action must be notified.
Absence of an escutcheon, which is
used to cover a clearance hole, may
delay the time to sprinkler operation in
a fire situation.
Sprinklers that are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers must never be be
painted, plated, coated or otherwise
altered after leaving the factory. Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
ARROW MUST
POINT AWAY
FROM AND BE
PERPENDICULAR
TO THE BACK
WALL SURFACE
v41 . T .
•'E -3/16°
.•• •
• •••
•
'7 •
•••• •
• •
TFP161
SHOWN • • • CROSS
UPRIGHT • SEQ•ION
-w • ••••
• • •
1 - Frame 3 - Sealing 4 - Bulb • • • - Deflecto • • •
2 - Button Assembly 5 - Compression 7- Ejection Spring •
Screw
* Temperature rating is indicated on deflector or adjacent to orifice seat on frame.
'"'''Pipe thread connections per ISO 7/1 can be provided on special request.
FIGURE 2
5.6 K- FACTOR STANDARD RESPONSE
SERIES TY-B VERTICAL SIDEWALL (TY3451) SPRINKLERS
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
age to the sprinklers - before, during,
and after installation. Sprinklers dam-
aged by dropping, striking, wrench
twist/slippage, or the like, must be re-
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb. (Ref. Installation
Section).
Frequent visual inspections are rec-
ommended to be initially performed for
corrosion resistant coated sprinklers,
after the installation has been com-
pleted, to verify the integrity of the cor-
rosion resistant coating. Thereafter,
annual inspections per NFPA 25
should suffice; however, instead of in-
specting from the floor level, a random
sampling of close -up visual inspec-
tions should be made, so as to better
determine the exact sprinkler condi-
tion and the long term integrity of the
corrosion resistant coating, as it may
be affected by the corrosive conditions
present.
• •
• •
•
•
••
•
• •
•
•
•
•
•
TFP161
SERIES
TY-B
MOUNTING
PLATE
MOUNTING
SURFACE
CLOSURE
1 -1/4° (31,8 mm)
3/4° (19,1 mm)
5/8-11/4°
(15,9±6,4 mm)
FACE OF
SPRINKLER
FITTING
v
1/8'
(3,2 mm)
3/4° (19,1 mm)
1/4° (6,4 mm)
2 -7/8° DIA.
(73,0 mm)
2 -1/4° DIA.
(57,2 mm)
FIGURE 3
SERIES TY-B RECESSED HORIZONTAL SIDEWALL SPRINKLER
WITH TWO -PIECE 3/4 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service.
Limited
Warranty
Products manufactured by Tyco Fire
Products are . warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro-
sion, or which have not been installed,
maintained, modified or repaired in ac-
cordance with applicable Standards of
the National Fire Protection Associa-
tion, and/or the standards of any other
Authorities Having Jurisdiction. Mate-
rials found by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Fire Products' sole
option. Tyco Fire Products neither as-
sumes, nor authorizes any person to
Page 5of6
WRENCH RECESS
(END °A° USED FOR
1/2° NPT MODELS)
FIGURE 4
W-TYPE 6 SPRINKLER JIII NCH
• •
• • •...
• • •
•• •
RECESS* • •
•
•
••
•••
•
•• ••
• • •
•• •
•
•
•
•
•
•
• •
: o . 46H WRENCH
- IN
ENGAGEMERT •
WITH SPRINKLER
WRENCHING AREA
FIGURE 5
W-TYPE 7 RECESSED
SPRINKLER WRENCH
assume for it, any other obligation in
connection with the sale of products or
parts of products. Tyco Fire Products
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE-
ORY, FOR INCIDENTAL, INDIRECT,
SPECIAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS' LI-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY IS
MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES EXPRESS OR
JMPLIED. INCLUDING WARRANTIES
OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PUR-
POSE.
•
•
•
•
Page 6 of 6
Ordering
Procedure
P/N 57 - XXX - X - XXX
578
575
HORIZONTAL SIDEWALL
VERTICAL SIDEWALL
MODEVSIN
TY3351
TY3451
When placing an order, indicate the full
product name. Refer to the Price List
for complete listing of Part Numbers.
Contact your local distributor for avail-
ability.
Sprinkler Assemblies with NPT
Thread Connections:
Specify: (Specify Model /SIN), Stand-
ard Response, (specify K- factor),
(specify temperature rating), Series
TY-B (specify Horizontal Sidewall or
Vertical Sidewall) Sprinkler with (spec-
ify type of finish or coating), P/N (spec-
ify from Table B).
Recessed Escutcheon:
Specify: Style (specify) Recessed Es-
cutcheon with (specify finish), P/N
(specify).
1/2° (15 mm)
Style 10
Chrome Plated P/N 56- 701 -9-010
1 /2° (15 mm)
Style 10
White Color
Coated P/N 58- 701 -4-010
1/2° (15 mm)
Style 10
Brass Plated P/N 58 -701 -2.010
1
4
9
7
6
8
SPRINKLER
NATURAL BRASS
WHITE POLYESTER
CHROME PLATED
LEAD COATED
WAX COATED
286 °F /141 °C MAX.
WAX OVER LEAD
286 °F1141 °C MAX.
Sprinkler Wrench:
Specify: W -Type 6 Sprinkler Wrench,
P/N 56- 000 -6 -387.
Specify: W -Type 7 Sprinkler Wrench,
P/N 56- 850 -4 -001.
Wax Sticks:
(for retouching wrench damaged
wax coating)
Specify: (Specify color) color coded
Wax Stick for retouching (specify tem-
perature rating) temperature rated Se-
ries TY-B Sprinklers, P/N (specify).
Black for 135 °F P/N 56-085-1-135
Red for 155 °F ..... P/N 56 -065 -1 -155
Yellow for 175 °F P/N 56-065 -1 -175
Blue for 200 °F and
286 °F P/N 56 -065 4-288
NOTES
Each wax stick is suitable for retouch-
ing up to twenty-five sprinklers.
The wax used for 286 °F sprinklers is
the same as for 200 °F sprinklers, and,
therefore, the 286 °F sprinkler is limited
to the same maximum ceiling tempera-
ture as the 200 °F sprinkler (i.e.,
150 °F).
135
155
el75
• •
200
••••
TEMPERATURE
RATING
135 °F /57 °C
155F/68°C
• 175°09:0. •
•
• 200 °F /91°C: •
•• ••
1 289;
• @86 °F/141 °O
•
• •360 °F /1 321C •
•
•
•
• •
•• ••
• • •
• •
• •
TABLEB ••.• •
PART NUMBER SELECTION
SERIES TY-B HORIZONTAL AND VERTICAL SIDEWALL SPRINKLERS
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
TFP161
••• •
• • •
•• •
•
••••
• •
••••
• •••
• • •
•• •