ROOFING'Date 34- /Q
PERMIT APPLICATION FOR MIAMI SHORES VILLAGE
/ 3S0 E (01-ST Tax Folio
Job Address
Legal Description
Owner/Lessee / Tenant
Owner's Address /3 r te - O At E (0/ S T . Phone /
(
Contracting CoCl u z Z�r� c ✓PZ 6 em edal CO4f(aQ / Address,3(oO d
a €Ger ,/3 f LI a . 31 00
Qualifier rJ Z /Fade • .7 veL SS# Phone3O a• 6/9?
State # 6 Ccsz9 1/ 5 Municipal # Competency # Ins. Co.
Architect/Engineer
Bonding Company
Mortgagor
Permit Type (circle one): BUILDING ELECTRICAL PLUMBING MECHANICAL
WORK DESCRIPTION - 2 Qr, av e. Cot, I-4
Square Ft. Estimated Cost (value) _ FO
WARNING TO OWNER: YOU MUST RECORD A NOTICE OF COMMENCEMENT AND YOUR FAILURE TO DO SO MAY RESULT IN YOUR
PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY (IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER
OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.)
Application is hereby made to obtain a permit to do work and installation as indicated above, and on the attached addendum (if applicable). I certify that all work
wi ll be performed to meet the standards of all laws regulating construction in this jurisdiction. I understand that separate permits are required for ELECTRICAL
PLUMBING, SIGNS, POOLS, ROOFING and MECHANICAL WORK.
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws regulating
construction and zoning. Furthermore, I authorize the above -named contractor to do the work stated.
o Owner and/or I i ri82 . ; _ o mate
�►
My mmission Expires: �9 ��'A b. ta . ' o�
ll llll ll 11llll
FEES: PERMIT RADON C.C.F.
APPROVED:
Zoning
Mechanical
Building
Vcflo
Historically Designated: Yes No X
Master Permit # 615 7 CO Z / 6 3 � 3
Address
Address
Address
ROOFING PAVING FENCE SIGN
1 +-ue Joo-C.
19
NOTARY
Electrical
BOND
TOTAL DUE �®
Plumbing Structural Engineer
APPENDLY "F "REQUIRED OWNERS NO 1CATION FOR ROOMG CONSIDERATIONS
As it pertains to this Appendix "F ", it is the responsibility oftftc rooting contactor to provide the own
with the required roofing permit, to provide the owner with this appendix and to explain to the owner the
content of this form. The provisions of Chapter 34 of the South Florida Building Code (SFBC) govern
the minimum requirements and standards of the industry for roofing system installations. Additionally,
the following items should be addressed as part of the agreement between the owner and the contractor.
The owner's initial in the adjacent box indicates that the item has been explained.
4,. 0 1. Aesthetics-Workmanship: The workmanship provisions of Chapter 34 are for the purpose of
o' a ing that the roofing system meets the wind resistance and water intrusion performance standards.
Ae • etics (appearance) issues are not a consideration with respect to workmanship provisions. Aeh`tetic
issues such as color or architectural appearance, that are not part of a zoning code, should be addressed as
part of the agreement between the owner and the contractor.
2. Renailing Wood Decks: When replacing roofing, the existing wood roof deck may have to be
n . ed in accordance with the current provisions of Chapter 29 of the SFBC. (Tae deck is usually
concealed prior to removing the existing roof system)
3. Common Roofs: Common roofs are those which have no visible delineation between
boring units (i.e. townhouses, condominiums, etc.). In buildings with common roofs, the roofing
contractor and/or owner should notify the occupants of adjacent units of roofing work to be performed.
4. Exposed ceilings: Exposed, open beam ceilings are where the trade :ide of the roof decking
e viewed from below. The owner may wish to maintain the architectural appearance, therefore,
roofing nail penetrations of the underside of the decking may act be acceptable. The SFBC provides the
option of maintaining this appearance.
5104 APPENDLY "F"
I II 1 , 5. Ponding Water. The current roof system and/or deck of the building may not drain well and
ay 1 - use water to pond (accumulate) in low -lying areas of the roof. Ponding can be an indication of
structural distress and may require the review of a professional structural engineer. Ponding may shorten
the life expectancy and performance of the aew roofing system Ponding conditions may not be evident
until the original roofing system is removed. Ponding conditions should be corrected.
6. Overflow Scuppers (wall outlets): It is required that rainwater flow off so that the roof is not
aded from a build up of water. Perimeter/edge walls or other roof extensions may block this
discharge if overflow scuppers (wall outlets) are not provided. It may be necessary to install overflow
scuppers in accordance with Chapter 23 of the SFBC.
Li ; 7. Ventilation: Most roof structures should have some ability to vent natural airflow through the
Jeri eri of the structural assembly (the building itself). The existing amount of attic ventilation shall act
be reduced. It may be beneficial to consider additional venting which can result in extending the service
life of the roof.
Gin"- 3 / `O/
O r's /Ag is Signature Date Contractor's
Signature Signature
123.01-78 9/96
Appendix "E"
UNIFORM ROOFING PERMIT APPLICATION
PROCESS No.
Contractor's Name:C ese Z acg ,.,c/e2,
C/a / C sea e . es.
Job Address: (S050 /•/& /O 1 S 7L
�/ ROOF CATEGORY
IJ (I,ow Slope Application) ❑ (Nail -On Tile) ❑ (Mortar- Adhesive Set Tile)
❑ (Asphalt/Fiberglass Shingles) ❑ ( Metal Roofs \Wood Shingles & Shakes) ❑ (Other)
ROOF TYPE
❑ New Roof i_5 ‹,e ❑ Recovering ❑ Repair ❑ Maintenance
Flat Roof Area (ft 6 3 6 Sloped Roof Area (ft Total (ft / 3 G Master Permit No.
Exposure category (per ASCE 7 -88): C✓ Building Classification category (per ASCE 7 -88 table 1):
11
Ft.
Ft.
04414, T7
ROOF HEIGHT AND SYSTEM DETAILS
(Draw details as needed)
I t;el Sdrtace taf
C1G� C� AS v a 1 058 a
Deck type: `.2 /% ,' T !/aided
ATTACHMENT
SPACING
L
DETAIL 1 & 2
Fastener Type: 1 //1 R' ` S NAILS
Field: 1 E Perimeter: Co Corner:
r
6 , 4ta xit d t netoa
ROOF PLAN
Page -1
Appendix "E"
UNIFORM ROOFING PERMIT APPLICATION
PROCESS No.
Ridge Ventilation?
MEAN HEICI{r
Deck type:
Underlayment:
Insulation:
Fastener type & spacing:
Cap Sheet:
12"
ROOF SLOPZ
D E T A I L 3
SLOPED SYSTEM DESCRIPTION
Roo[ C overing:
Drip edge:
ATTACHMENTS REQUIRED
1) Fire Directory Listing Page
2) Dade County Product Control
Notice of Acceptance -Cover Sheet
a) Specific System Description
b) Specific System Limitation
c) General Limitations
d) Applicable Detail Drawings
3) Municipal Permit Application
4) Other Component Approvals
(Pmaxl: x X, (Aerodynamic Multiplier): ) - M
(Pmax2: x X (Aerodynamic Multiplier): ) - M
(Pmax3: x (Aerodynamic Multiplier): ) - M
TILE CALCULATIONS
=
Kt: PCA:
= M
= M PCA:
PCA:
tA\A
Page -2
BUILDING CODE COMPLIANCE OFFICE
METRO -DADE FLAGLER BUILDING:
140 WEST FLAGLER STREET, SUITE 1603
�- • MIAMI, FLORIDA 33130 -1563
(305) 375 -2901
FAX (305) 375 -2908
PRODUCT CONTROL NOTICE OF ACCEPTANCE PRODUCT CONTROL DIVISION - (305) (305)375 -2902
FAX (305) 372 -6339
GAF Materials Corporation
1361 Alps Road
Wayne, NJ 07470
Your application for Product Approval of:
GAF Conventional Built-Up Roof Systems for Wood Decks
under Chapter 8 of the Metropolitan Dade County Code governing the use of Alternate Materials and Types of
Construction, and completely described in the plans, specifications and calculations as submitted by:
Dynatech Engineering, Inc., Factory Mutual Research Corporation, and Underwriters Laboratories, Inc.
has been recommended for acceptance by the Building Code Compliance Office to be used in Dade County, Florida
under the specific conditions set forth on pages 2-40 and the standard conditions on page 41.
This approval shall not be valid after the expiration date stated below. The Building Code Compliance Office
reserves the right to secure this product or material at any time from a jobsite or manufacturer's plant for quality
control testing. If this product or material fails to perform in the approved manner, the Building Code Compliance
Office may revoke, modify, or suspend the use of such product or material immediately. The Building Code
Compliance Office reserves the right to revoke this approval, if it is determined by the Building Code Compliance
Office that this product or material fails to meet the requirements of the Building Code Compliance Office that this
product or material fails to meet the requirements of the South Florida Building Code.
The expense of such testing will be incurred by the manufacturer.
Acceptance No.: 97- 0804.21 Revises No.: 95- 1003.03
Expires: 11/04/00
THIS IS THE COVERSHEET, SEE ADDITIONAL PAGES FOR SPECIFIC AND GENERAL
CONDITIONS
BUILDING CODE COMMITTEE i
This application for Product Approval has been reviewed by the Metropolitan Dade County Building Code
Compliance Office and approved by the Building Code Committee to be used in Dade County, Florid under the
conditions set forth above.
Approved: 11/04/97
Internet mail address: postmaster@buildingcodeonline .com
1
et-a.
�--- • -, • •-..• ■•,YG %.vvry 1 1( FLORID/
METRO -DADE FLAGLER BUILDINC
aul Rodriguez
Product Control Supervisor
Charles Danger, P.E.
Director
Building Code Compliance Dept.
Metropolitan Dade County
Homepage: http : / /www.buildingcodeonline.com
Applicant:
GAF Materials Corporation
1361 Alps Road
Wayne, NJ 07470
PRODUCT CONTROL NOTICE OF ACCEPTANCE
ROOFING SYSTEM APPROVAL
Category: Membrane Roofing System
Sub - Category: Built -up Roofing
Type: Conventional
Sub -Type: Fiberglass
System Description
GAF Materials Corporation, a manufacturer of commercial roofing products for more than 100 years,
produces a wide range of roof products for built -up and modified bitumen roofing systems. In addition,
GAF offers two ply modified systems to meet the demands for multi -ply SBS modified specifications.
GAF provides warranted systems over various insulated and non - insulated substrates, copies of which
can be obtained from GAF and can be found in the "GAFGLAS Built -Up Roofing Application and
Specifications" manual published annually.
GAF roof system assemblies have been extensively tested at Factory Mutual Research Corporation and
Underwriters Laboratories and have been tested in compliance with all requirements of the South Florida
Building Code. Specific classifications for assemblies are listed in the current U.L. Roofing Material
Directory and the current Factory Mutual Approval Guide.
GAF Materials Corporation products are distributed through a wide network of roofing wholesale
distributors throughout the South Florida area.
For more information on specific roof system constructions, contact the Technical Service Office, located
in Wayne, New Jersey, at 1- 800 - ROOF -411.
Contact:
William J. Woodring
Director of Technical Services
(973) 628- 4134
Page 2 of 41
Product Control No.: 97- 0804.21
Approval Date: November 4, 1997
Expiration Date: November 4, 2000
ran Zuloaga,
Roofing Product Control Examiner
Insulation Types:
Material
Wood
Material
Wood
Basalt Wool
Perlite
Polyisocyanurate
Composite Board
Wood Fiberboard
High Density Wood Fiberboard
Rockwool
Maximum Design Pressure
Design Pressure
-75psf
Maximum Fire Classification
Classification
Class 'A'
Note: Fire classifications and maximum design pressures do not reference all assemblies over all deck
types. Review system listings for design pressures and the Underwriters Laboratories Roofing
Materials Directory for Fire Classifications.
Page 3 of 41
Roofing Product Control Examiner
Product
GAF Asphalt
Concrete Primer
GAF Mineral Shield®
Granules
GAF WeatherCoat®
Emulsion
GAF Premium
Fibered Aluminum
Roof Coating
GAF Jetblak All
Weather Plastic
Cement
RUBEROID®
Modified Bitumen
Flashing Cement
Jetblack Premium
Flashing Cement
GAFGLAS ® #75
GAFGLAS #80
Ultima Base Sheet
GAFGLAS Ply 6®
GAFGLAS Flex
piyTM 6
GAFGLAS Ply 4®
TRADE NAMES OF PRODUCTS MANUFACTURED OR
LABELED BY APPLICANT
Test
Dimensions Specification
5, 55 gallons ASTM D 41 Asphalt concrete primer used to promote
adhesion of asphalt in built -up roofing.
60 Ib. bags ASTM Q 1863
5 gallons
1, 5 gallons
5 gallons
3 sq. roll
75 Ib. roll
2 Sq. Roll
70 lbs. /roll
5 sq. roll
45 Ib. roll
5 sq. roll
45 Ib. roll
5 sq. roll
ASTM 1227
Page 4 of 41
Product
Description
Granules for surfacing of exposed
asphalt. cold process cement or
emulsion. GAF Mineral Shield®
Granules shall be used for flashing
applications only.
Surface coating for smooth surfaced
roofs.
1, 5 gallons ASTM D 2824 Fibered aluminum coating.
ASTM D 3019 Refined asphalt blended with a mineral
ASTM D 3409 stabilizer and fibers. Permits adhesion
to wet and dry surfaces.
5 gallons ASTM D 4586 Fiber reinforced. polymer modified
Flashing cement
ASTM D 4586 Asphalt flashing, Cement
ASTM D 4601 Asphalt impregnated and coated glass
mat base sheet.
ASTM D4601 Asphalt impregnated and coated,
fiberglass base sheet
ASTM D 2178 Type VI asphalt impregnated glass felt
with asphalt coating.
ASTM D 2178 Type VI asphalt impregnated glass felt
with asphalt coating.
ASTM D 2178 Type IV asphalt impregnated glass felt
with asphalt ow
0o ing Product Contro
Product
GAFGLAS®
Mineral Surfaced
Cap Sheet
GAFGLAS®
STRATA VENT®
Perforated
GAFGLAS® Flashing
GAFGLAS®
STRATA VENT
Nailable
RUBEROID Modified 3 sq. roll
Base Sheet 67 lbs.
GAFTEMP®
Isotherm R
Tapered GAFTEMP®
Isotherm R
GAFTEMP Isotherm
RA
Tapered GAFTEMP
Isotherm RA
GAFTEMP Isotherm
RN
Tapered GAFTEMP
Isotherm RN
GAFTEMP®
Composite
Dimensions
76 Ib. roll
60 Ib. roll
various
69 Ib. roll
various
various
various
various
various
various
various
Test
Specification
ASTM D 3909
ASTM D 4897
D 3672
ASTM D 489
D 3672
Page 5 of 41
Product
Description
Asphalt coated, glass fiber mat cap sheet
surfaced with mineral granules.
Fiber glass base sheet impregnated and
coated on both sides with asphalt.
Surfaced on the bottom side with
mineral granules embedded in asphaltic
coating with factory perforations.
Asphalt coated glass fiber mat flashing
sheet available in three sizes.
Fiber glass base sheet impregnated and
coated on both sides with asphalt.
Surfaced on the bottom side with
mineral granules embedded in asphaltic
coating.
ASTM D4601, Premium glass fiber reinforced SBS-
Type II, UL Type modified base sleet
G2 BUR
PA 110 Polyisocyanurate foam insulation.
PA 110 Tapered Polyisocyanurate foam
insulation
PA 110 Polyisocyanurate foam insulation
PA 110 Tapered Polyisocyanurate foam
insulation
PA 110 Polyisocyanurate foam insulation
PA 110 Tapered Polyisocyanurate foam
insulation
PA 110 Polyisocyanurate foam insulation with
high density fiberboard or Permalite
perlite insul. 'a '—'
Roofing Product Control xam
- 7)
Product
Tapered GAFTEMP® various
Composite
GAFTEMP®
Composite A
i
Tapered GAFTEMP®
Composite A
GAFTEMP®
Composite N -
Tapered GAFTEMP®
Composite N
GAFTEMP®
Fiberboard
GAFTEMP®
Permalite®
GAFTEMP Recover
Board
GAFTEMP®
High Density
Fiberboard
GAFTITE® #12
Standard
Roofing Fastener
GAFTITE® #14
Heavy Duty
Roofing Fastener
GAFTITE ASAP
Test
Dimensions Specification
various
various
various
various
various
various
1/2" thick
various
Product
Description
PA 110 Tapered Polyisocyanurate foam
insulation with high density fiberboard
or Permalite perlite insulation.
PA 1 10 Polyisocyanurate foam insulation with
high density fiberboard or Permalite
perlite insulation.
PA 1 10 Tapered Polyisocyanurate foam
insulation with high density fiberboard
or Permalite perlite insulation.
PA 110 Polyisocyanurate foam insulation with
high density fiberboard or Permalite
perlite insulation.
PA 110 Tapered Polyisocyanurate foam
insulation with high density fiberboard
or Permalite perlite insulation.
PA 110 Fiberboard insulation.
PA 110 Perlite insulation board.
PA 110 Perlite recover board
PA 110 High density wood fiberboard
insulation.
PA 114 Insulation fastener for steel and plywood
decks.
PA 114 Insulation fastener for steel, wood and
concrete decks.
PA 114 Pre- assembled GAFTITE Fasteners and
metal and plastic plates.
Page 6 of 41
oofing Product Contro xam
:7")
Product
GAFTITE® Base
Sheet
Fastener and Plate
Galvalume Plates
NTB Fasteners
Polypropylene Plates 3" and 3 %,"
Ruberoid® 20
Ruberoid® Mop
Granule
RUBEROID MOP
Smooth
RUBEROID® MOP
PLUS
RUBEROID® MOP
I70FR
RUBEROID® MOP
FR
RUBEROID®
TORCH Smooth
RUBEROID®
TORCH Granule
Test
Dimensions Specification
3" and 3 %"
1.5 sq. roll
95 lbs.
1 sq. roll
103 lbs.
1 sq. roll
87 lbs.
1 sq. roll
102 Ibs.
I sq. roll
103 lbs.
1 sq. roll
105 lbs.
1 sq. roll
87 lbs.
I sq. roll
102 lbs.
Product
Description
PA 114 Base sheet fastening assembly.
PA 114 Round gaivalume stress plates.
PA 114 Fastener for use in gypsum, tectum and
lightweight insulating concrete decks.
PA 114 Round polypropylene stress plates.
ASTM D 5147
SBS modified asphalt base sheet and
interply sheet reinforce with a glass fiber
mat.
ASTM D 5147 Non -woven polyester mat coated with
polymer modified asphalt and surfaced
with mineral granules.
ASTM D 5147 Non -woven polyester mat coated with
polymer modified asphalt and smooth
surfaced.
ASTM D 5147 Non -woven polystcr mat coated with
polymer modified asphalt and surfaced
with mineral granules.
ASTM D 5147 Non -Woven polyester mat coated with
fire retardant polymer modified asphalt
and surfaced with mineral granules.
ASTM D 5147 Non -Woven polyester mat coated with
fire retardant polymer modified asphalt
and surfaced with mineral granules.
ASTM D 5147
ASTM D 5147 Heavy duty, polyester reinforced,
asphalt modified bitumen membrane,
granule surface.
Page 7 of 41
Heavy duty, polyester reinforced,
asphalt modified bitumen membrane,
smooth surface.
0o ing Product Control Examiner
Product
RUBEROID MOD
Asphalt L
RUBEROID MOD
Asphalt P
GAFTEMP
Composite A
GAFTEMP Tapered
Composite A
GAFTEMP
Composite N
GAFTEMP Tapered
Composite N
GAFTEMP Tapered
Isotherm R
GAFTEMP Tapered
Isotherm RA
GAFTEMP Tapered
Isotherm RN
GAFTEMP
GAFCANTTM
GAFTEMP
GAFEDGETM
Tapered Edge Strip
GAFTEMP
PERMALITE®
Tapered Roof
Insulation
Shingle- MateTM
Underlayment
Test Product
Dimensions Specification Description
60 Ib. kegs SEBS modified asphalt
60 Ib. kegs SEBS modified asphalt
Various PA 110 Polyisocyanurate /wood fiberboard
composite
Various PA 110 Tapered Polyisocyanurate /wood
fiberboard composite
Various PA 110 Polyisocyanurate /wood fiberboard
composite
Various PA 110 Tapered Polyisocyanurate /wood
fiberboard composite
Various PA 110 Tapered polyisocyanurate foam
Various PA 110 Tapered polyisocyanurate foam
Various Tapered polyisocyanurate foam
Various Cut perlite board
Various Tapered perlite board
Various
GAFTEMP Recover 1/2" thick,
Board Various sizes
4 sq. roll
30 lbs.
PA 110 Tapered perlite board
PA 110 Perlite board
Page 9 of 41
Fiberglass reinforced shingle
underlayment
F
Roofing Product Control Examiner
1
Product
RUBEROID®
TORCH PLUS
RUBEROID®
TORCH FR
RUBEROID® 30
RUBEROID® 30 FR
RUBEROID
ULTRACLAD® SBS
Vent Stacks (metal
and plastic)
GAF Aluminum
Emulsion
RUBEROID® 109. Roll
ULTRACLAD® SBS 101 lbs.
GAF Aluminum Roof 5 gallons
Paint
GAF Built -Up
Roofing Asphalt
RUBEROID MOD 60 Ib. kegs
Asphalt
Test
Dimensions Specification
3 /4 sq. roll
93 lbs.
'/. sq. roll ASTM D 5147
90 lbs.
1 sq. roll
92 lbs.
1 sq. roll
92 lbs.
'sq. roll
101 lbs.
5 gallons
100 Ib. cartons,
bulk
ASTM D 5147
None
ASTM D 5147
ASTM D 5147
ASTM D 5147
ASTM D 5147
ASTM D2824,
Type I
Page 8 of 41
Product
Description
Heavy duty, polyester reinforced,
asphalt modified bitumen membrane,
granule surface
Heavy duty, polyester reinforced, coated
with fire retardant asphalt modified
bitumen membrane, granule surface.
Non woven fiberglass mat coated with
polymer modified asphalt and surfaced
with mineral granules.
Non woven fiberglass mat coated with
fire retardant polymer modified asphalt
and surfaced with mineral granules.
Woven fiberglass mat coated with
Polymer modified asphalt and surfaced
with aluminum, copper or stainless steel
foil.
PA 100(A) One way valve vent used to relieve
ASTM D 1929 built -up pressure within the roof system.
ASTM D 635 GAF Vent Stacks are available in metal
or plastic.
Mineral colloidal bituminous emulsion
with reflective aluminum flakes
Woven fiberglass mat coated with
Polymer modified asphalt surfaced with
aluminum, copper or stainless steel foil.
Non - fibered. aluminum pigmented,
asphalt roof coating
ASTM D312, Interply mopping and surfacing asphalt
Types 1, II, III and
1V
SEBS modified asphalt
Roofing Product Control Examiner
Test Product
Product Dimensions Specification Description
GAFTITE® ASAP 500 per box PA 114 Pre - assembled fastener and metal and
plastic plates
Page 10 of 41
oaga,
Roofing Product Control Examiner
Anchorbond
Fastener
TRADE NAMES OF PRODUCTS MANUFACTURED BY OTHERS
Test Product
Product Dimensions Specification Description
Page 1 1 of 41
Manufacturer
Pvrox various PA 1 10 Polyisocyanurate foam Apache Products Co.
insulation (with current PCA)
ACFoam 1 various PA 110 Polyisocyanurate foam Atlas Energy
insulation Products
(with current PCA)
ACFoam 11 various PA 110 Polyisocyanuratc foam Atlas Energy
insulation Products
(with current PCA)
Hy -Therm Nail -line various PA 110 Polyisocyanurate foam Celotex Corp.
insulation (with current PCA)
Hy -Therm SP various PA 110 Polyisocyanurate foam Celotex Corp.
insulation. (with current PCA)
Hy -Therm AP various PA 110 Polyisocyanurate foam Celotex Corp.
insulation (with current PCA)
Hy -Therm Stable R various PA 110 Polyisocyanurate foam Celotex Corp.
insulation (with current PCA)
Hy -Therm White various PA 110 Polyisocyanurate foam Celotex Corp.
Line
insulation (with current PCA)
PA 114 Insulation fastening Celotex Corp.
assembly (with current PCA)
Dekfast Fasteners PA 114 Insulation fastener for steel Construction
#14 and concrete decks Fasteners Inc.
• (with current PCA)
Dekfast Hex Plate 2 7/8" x PA 114 Galvalume hex stress plate. Construction
3 1/4" Fasteners Inc.
(with current PCA)
u oaga,
Roofing Product Control Examiner
r)
•
Product
Dekfast Lock Plate 3" x 3 1/4"
Dekfast Fasteners
#14
Dekfast Fasteners
#12
ISO 95+ Composite
Asphalt
Asphalt Primer
EPS
High Density Wood various
Fiberboard
Pelite /Urethane
Composite
Perlite Insulation
Polyethylene
Red Rosin
Roofing Nails
Test Product
Dimensions Specification Description
PA 114 Polypropylene locking
plate.
PA 114 Insulation fasteners for Construction
concrete decks Fasteners Inc.
(with current PCA)
PA 114 Insulation fastener
and wood decks.
PA 110 Polyisocyanurate / perlite Firestone
ridged insulation (with current PCA)
ASTM D 312 Type 111 or IV Hot asphlat
bitumin adhesive
ASTM D 41 Asphalt Primer
various PA 1 10 Extruded polystyrene
insulation
PA 110 Wood fiber insulation board
various
various
4 mil min.
various
Minimum #
12
PA 110 Perlite / urethane composite
board insulation
PA 110 Perlite insulation board
Vapor barrier / Air barrier
PA 114
rosin paper for barrier
layer on wood decks
Corrosion resistant annular
ring shank nails
Page 12 of 41
Manufacturer
Construction
Fasteners Inc.
(with current PCA)
for steel Construction
Fasteners Inc.
(with current PCA)
generic
generic
generic
generic
generic
generic
generic
generic
generic
Roofing Product Control Examiner
Test Product
Product Dimensions Specification Description
a
Tin Caps
MB aluminum roof
coating
Dens -Deck
#12 Roofgrip
#14 Roofgrip
Gripdek Fastener
Hexcel Fastener
Hextra
Standard Plastic
Plate
ISO 95+
E'NRG'Y -2
ISORoc
Min. 32 ga. x
various
3" round
various
various
various
Olympic Standard 3" round
PA 121 Aluminum roof coating
PA 110 Gypsum insulation board.
PA 114 Insulation fastener for steel
or wood decks
PA 114 Insulation fastener steel,
wood or concrete decks
PA 114 Insulation fastener
PA 114
PA 114
PA 114
PA 110
Corrosion resistant circular
discs.
Insulation fastener
Insulation fastener and
metal or plastic plate
Polyolefin plastic plate
PA 110 Polyisocyanurate foam
insulation
PA 110 Polyisocyanurate foam
insulation
Polyisocyanurate foam /
tockwool composite
insulation
PA 114 3" round galvalume
AZ55 steel plate
Page 13 of 41
Manufacturer
generic
Grundy Industries
(with current PCA)
Georgia Pacific
(with current PCA)
ITW Buildex
(with current PCA)
ITW Buildex
(with current PCA)
ITW Buildex
(with current PCA)
ITW Buildex
(with current PCA)
ITW Buildex
(with current PCA)
ITW Buildex
(with current PCA)
Firestone
(with current PCA)
NRG Barriers, Inc.
(with current PCA)
NRG Barriers, Inc.
(with current PCA)
Olympic
Manufacturing
Group, Inc.
(with current PCA)
Roofing Product Control Examiner
Test Product
Product Dimensions Specification Description
Olympic Fastener
#14
Olympic
Polypropylene
Olympic Fastener
#12
Olympic Fastener
ASAP
Olympic CR Base
Felt Fastener and
Base Sheet Disc
GlasFast Fastener
Paroc Base Board
Paroc Cap Board
Multi -Max
Multi -Max FA
3.25" round
various
various
various
various
PA 114 Insulation fastener
PA 114 Polypropylene
plastic plate
PA 114 Insulation fastener
PA 114 Pre - assembled Insulation
fastener and plate
PA 114
PA 114
Insulation fastener
assembly for Base Sheet
fastening only
Insulation fastener
assembly with recessed
plastic plate
PA 110 Rockwool insulation
PA 110 Rockwool insulation
PA 11.0 Polyisocyanurate foam
insulation
PA 110 Polyisocyanurate foam
insulation
Page 14 of 41
Manufacturer
Olympic
Manufacturing
Group, Inc.
(with current PCA)
Olympic
Manufacturing
Group, Inc.
(with current PCA)
Olympic
Manufacturing
Group, Inc.
(with current PCA)
Olympic
Manufacturing
Group, Inc.
(with current PCA)
Olympic
Manufacturing
Group, Inc.
(with current PCA)
Owens- Corning
Fiberglas Corp.
(with current PCA)
Partek, Inc.
(with current PCA)
Partek, Inc.
(with current PCA)
Rmax, Inc.
(with current PCA)
Rmax, Inc.
(with current PCA)
Roofing Product Control Examiner
UltraGard
lnsul -Fixx Fastener
Insul -Fixx P
Rawl Fasteners
#12
Rawl Fasteners
# I4
Rawl 2" Plate
Rawl 3" Plate
Rawlite 3" Plate
Super Prep II
Tru -Fast DL
Tru -Fast Plastic
Plate
Test Product
Product Dimensions Specification Description
various
3" round
2" round
3" round
3" round
PA 110 Polyisocyanurate foam
insulation
PA 114 Insulation fastener for steel
and wood decks
PA 114 3" round polyethylene
stress plate
PA 114 Insulation fastener for steel
and wood decks
PA 114 Insulation fastener for use
in steel, wood or concrete
PA 114 2" round galvalume AZ55
membrane plate
PA 114 3" round galvalume AZ55
steel plate
PA 114
3" round galvalume AZ55
steel plate for use with
Rawlite fasteners
PA 121 Roof coating
PA 114 Insulation fastener for steel.
or wood
3.04" round PA 114 3.04" round polyethylene
plastic plate
Page 15 of 41
Manufacturer
Schuller
International Inc.
(with current PCA)
SFS /Stadler
(with current PCA)
SFS /Stadler
(with current PCA)
The Rawlplug
Company Inc.
(with current PCA)
The Rawlplug
Company Inc.
(with current PCA)
The Rawlplug
Company Inc.
(with current PCA)
The Rawlplug
Company Inc.
(with current PCA)
The Rawlplug
Company Inc.
(with current PCA)
Thermo- Materials,
Inc.
(with current PCA)
Tru -Fast
with current PCA)
Tru -Fast
(with current PCA)
oaga,
Roofing Product Control Examiner
Tru -Fast TP
Structodeck
Product Dimensions
Tru -Fast MP -3
Tru -Fast HD
Tru -Fast Ultra
Tru -Fast DP
3.23" round
various
Test
Specification
PA 114
PA 114
PA 114
PA 114
PA 114
PA 110
Product
Descriation
3.23" round galvalume
AZ50 steel plate
Insulation fastener for use
in wood, steel or concrete
decks
Stainless Steel fastener for
use in steel, wood and
concrete decks
Insulation fastener for use
in steel or wood decks
Insulation fastener for use
in steel or wood decks
High density wood fiber
Page 16 of 41
Manufacturer
Tru -Fast
(with current PCA)
Tru -Fast
(with current PCA)
Tru -Fast
(with current PCA)
Tru -Fast
(with current PCA)
Tru -Fast
(with current PCA)
Wood Fiber
Industries
(with current PCA)
Roofing Product Control Examiner
Tcst
Name
Report
Date
agency /Identifier
Factor Mutual Research
Corporation
Current Insulation FMRC 1996 01.01.96
Attachment
Requirements
Factory Mutual Research
Corporation
Wind Uplift - J.I. OT4A I.AM 08.26.92
FMRC 4470 - PA 114
Factory Mutual Research
Corporation
Wind Uplift 1.1. I V8A4.AM 06.28.93
FMRC 4470 - PA 114
Factory Mutual Research
Corporation
Wind Uplift J.I. IRIA6.AM 11.15.91
FMRC 4470 - PA 114
Factory Mutual Research
Corporation
Wind Uplift J.I. 0T2Q4.AM 10.17.91
FMRC 4470 - PA 114
Factory Mutual Research
Corporation
Wind Uplift J.1. 0Q6A6.AM 07.16.91
FMRC 4470 - PA 114
TEST REPORTS
Factory Mutual Research
Corporation
Factory Mutual Research
Corporation
Factor_. Mutual Research
Corp.
Underwriters
Laboratories, Inc.
Dynatech Engineering
Corporation
Dynatech Engineering
Corporation
Wind Uplift
FMRC 4470 - PA 114
Wind Uplift
FMRC 4470 - PA 114
Wind Uplift, FMRC
4470 - PA 114
Wind Uplift
PA 114
J.I.3 X3 A2.A M
J.1. 0Y9Q5.AM
1.I. l B9A8.AM
R1306, 87NK1 1819
#3600.02.95 -1
#4482.02.95 -1
08.02.94
07.29.94
Fire Resistance
Classification
UL 790 - PA 114
Wind Uplift
PA 114
01.01.93
02.02.95
02.02.95
Page 17 of 41
ga,
Roofing Product Control Examiner
Deck Type 1: Wood, Non - insulated New Construction or Reroof
Deck Description: le / " or greater plywood or wood plank decks
System Type A(2): Base sheet mechanically fastened.
All General and System Limitations shall apply.
Base Sheet:
Ply Sheet:
GAFGLAS® #75, GAFGLAS #80 Ultima Base Sheet. GAFGLAS® PLY 4 ®,
GAFGLAS® PLY 6 ®, GAFGLAS FlexPly, GAFGLAS® STRATAVENT®
Nailable, RUBEROID Modified Base Sheet or RUBEROID® 20 applied to the
deck with approved annular ring shank nails and minimum 1 ' / tin caps at a
fastener spacing of 9" o.c. at the lap, 12" o.c. in two rows staggered along the
center line of the sheet in the field.
Two or three plies of GAFGLAS® PLY 4 ®, GAFGLAS FlexPIy 6 or
GAFGLAS® PLY 6® ply sheet adhered in a full mopping of approved asphalt
applied within the EVT range and at a rate of 20 -40 lbs. /sq..
Cap Sheet: (Optional) One ply of GAFGLAS® Mineral Surfaced Cap Sheet adhered in a full
mopping of approved asphalt applied within the EVT range and at a rate of 20 -40
lbs. /sq..
Surfacing: (Required if no cap sheet is used) Install one of the following:
I.GAF WEATHER COAT® Emulsion with an application rate of 3 gal. /sq.; or
GAF Premium Fibered Aluminum Roof Coating with an application rate of 1.5
gal. /sq..
2. Asphalt flood coat at an application rate of 60 lbs. /sq. ± 20 %; plus gravel or
slag with an application rate of 400 lbs. /sq. & 300 lbs. /sq.. respectively.
Maximum Design
Pressure: - 45 psf. (See General Limitation #7)
Maximum Fire
Classification: 'A'. See General Limitation #2.
Maximum Slope: 6 ":12 "; See General Limitation #3.
Specification No.: N - B - - N- B -3 -C, N- B -3 -M, N- B-4 -G, N- B- 4 -G /P6, N- B-4 -M, N- B- 4 -M /P6, N- B-4 -C,
N- B- 4 -C/P6, N- B -5 -C, N- B- 5 -C/PC, N- B -5 -G, N- B- 5 -G /P6, N- B -5 -M, N- B- 5 -M/P6
Page 21 of 41
ga,
Roofing Product Control Examiner
i
Wood Deck System Limitations:
I. Fastener spacing for anchor sheet attachment is based on a Minimum Characteristic Force (F')
of 95 lbf or greater as tested in compliance with Merto-Dade County Protocol PA 105. If F' as
tested is below 95 lbf, a professional engineer may submit a revised fastener spacing utilizing
the withdrawal resistance value taken from Merto-Dade County Protocol PA 105 and
calculations in compliance with Metro -Dade Roofing Application Stanadrd PA 117.
All standard insulation panel sizes are acceptable for mechanical attachment. When panels are
applied in hot asphalt, maximum panel size shall be 4' x 4'.
a. Fastener spacing for insulation attachment is based on a Minimum Characteristic Force (F') of
275 Ibf. as tested in compliance with Merto-Dade County Protocol PA 105 & Roofing
Application Standard PA 117. If the fastener value, as field tested, are below 275 lbf. insulation
attachment shall not be acceptable.
3 A slip sheet is required with PIy 4® Flex PIyT'' 6 and PIy 60 when used as a mechanically fastened
base or anchor sheet.
4. '/ Type X gypsum board is acceptable to be installed directly over the wood deck..
Page 37 of 41
u oaga,
Roofing Product Control Examiner
i
GENERAL LIMITATIONS
1 All asphalt shall comply with ASTM D 312 type III or type IV requirements, and
approved by applicant.
' - Fire ratings are determined by a combination of slope, deck type and assembly. Refer to
current Underwriters Roofing Materials Directory or other fire testing data listed in the
testing file. Fire ratings shall be in strict compliance with Sections 3401.5 and 3401.6 of
the South Florida Building Code.
3 Maximum slope range shall vary for each system; consult current Underwriters
Laboratories Roofing Materials Directory and manufacturer's specifications for
compliance with design criteria for each project.
4 An overlay and/or recovery board insulation panel is required on all applications over
closed cell foam insulations when the base sheet is fully mopped. If no recovery board is
used, install one layer of GAFGLASS STRATAVENT Perforated, laid dry.A base sheet
may be applied using spot mopping with approved asphalt, 12" diameter circles, 24" o.c.;
or strip mopped 8" ribbons in three rows, one at each sidelap and one down the center of
the sheet allowing a continuous area of ventilation. Encircling of the strips is not
acceptable. A 6" break shall be placed every 12' in each ribbon to allow cross ventilation.
Asphalt application of either system shall be at a minimum rate of 12 lbs. /sq. Note:
Spot attached systems shall be limited to a maximum design pressure of -45 psf. Where
STRATAVENT Perforated is used over approved isocyanuratc foam insulation, the
maximum design pressure is limited to —60psf.
5 All work shall be performed by a contractor licensed to do roofing work in Metro -Dade
County. Contractor shall be familiar with the details and specifications published by the
manufacturer, and the requirements of the SFBC.
6 The submission of system specifications and details shall accompany the Section II
Building Code Permit. This information is available in the publications listed in the
'System Description' of this Product Control Approval. The submission of these
documents, as well as the proper application and installation of all materials shall be the
sole responsibility of the contractor.
Page 38 of 41
ran Zuloaga,
Roofing Product Control Examiner
t0 -d TZ171717Z22.01rt
Page 39 of 41
Product Control No: P7 - 0804,21
7 Perimeter and corner areas shall comply with the enhanced uplilR pressure of these areas,
na vntculatcd in compliance with Chapter 23 of the South Florida Building Code. Fastener
densities shall be increase for both insulation and base sheet as needed calculated in compliance
.with Metro -Dade County Rooting Application Standard PA 117. (When this limitation is
specifically referred ■vithin this NOA, Central Limitation #20 will not be applicable.)
8 All attachment and sizing of perimeter Hailers, metal profile, and/or flashing termination
designs shall conform with Mctro -Dade County Roofing Application Standard PA 1 1 1
and the wind load requirements of Chapter 23 of the South Florida Building Code.
9 Flashings shall be installed according to the manufacturers standard details, and may be
applied in cold application adhesive, approved asphalt or may be applied in conjunction
with an approved torch applied modified bitumen membrane. Specific details, approved
.by the manufacturer, shall be submitted with the Section II Permit Application. All details
shall comply with the provision of the South Florida Building Code.
10 .Fastener spacing for base sheet attachment is based on a Minimum Characteristic Force
(F') value as tested in compliance with Metro -Dade County Protocol PA 105. if the fastener
Values as tested arc below those listed in the System Limitations, a professional engineer may
submit a revised fastener spacing utilizing the withdrawal resistance value taken from a Metro -
,Dade County Protocol PA 105 test report and calculations that comply with the wind toad
requirements of Chapter 23 of the South Florida Building Code and Roofing Application Standard
PA 1 1 7.
11 ,Fastener spacing for insulation attaclunent is based on a Minimum Characteristic Force
(F') value of 275 1bf., as tested in compliance with PA 105. if the fastener value, as field tested,
iirc below 275 lbf. insulation attachment shall not be acceptable.
12 Asphalt mappings shall be with applied with approved asphalt and shall be in compliance
with equiviscous temperature (ENT) methods of asphalt determination. Asphalt containers or
bulk tickets shall indicate an EVT, finished blowing temperature (FBI) and flash point, Asphalt
types and temperature ranges shall be in compliance with Subsection 3403.4(a)(3) of the South
Florida Building Code.
13 Insulation may be installed in multiple layers. The first layer shall be attached in
compliance with Product Control Approval guidelines, All other layers shall be adhered
in a full mopping of approved asphalt applied within the EVT range and at a rate of 20 -
lbs. /sq., or mechanically attached using the fastening pattern of the top layer. Refer to
manufacturer's literature and/or the NRCA Roofing and Waterproofing Manual for correct
application procedures of insulation panels in approved asphalt or adhesive, which shall
comply with provision of Roofing Application Standard PA 1 17.
Roo ng Product Control x
3I1101 Wd ts:: Zt 66- ZZ -2ldd
• 1.4 All standard panel sizes are acceptable for mechanical attachment. When applied in
approved asphalt, panel size shall be 4' x 4' maximum.
15 In re- covery/re- roofing applications, prior to the application, all existing roof surfaces used as a
bonding substrate shall be tested in compliance with Metro -Dade County Protocol PA 124 for
uplift resistance. Test pressures shall be calculated in compliance with the wind load
requirements of Chapter 23 of the South Florida Building Code to the design pressure of the roof.
16 In re- roofing applications, moisture content in an existing roof must be in compliance with
Section 3401.10(m), (n) of the South Florida Building Code.
17 Roll good materials shall be stored on end and on a clean, flat and dry surface.
18 If required, any Factory Mutual Approved vapor barrier in conjunction with proprietary or
approved adhesives may be used prior to the application of the insulation layer.
19 Consult current Underwriters Laboratories Directory for the appropriate coating for each
roofing assembly to obtain the required fire rating. The assembly shall be installed in
strict compliance with sections 3401.5 and 3401.6 of the South Florida Building Code for
maximum fire classification.
20 The maximum designed pressure limitation listed shall be applicable to all roof pressure
zones (i.e. field, perimeters, cornets). No rational analysis, nor extrapolation shall be
permitted for enhanced fastening at enhanced pressure zones (i.e. perimeters, extended
corners, and corners). (When this limitation is specifically referred within this NOA,
General Limitation #7 will not be applicable.)
Page 40 of 41
�./
~ u oaga,
Roofing Product Control Examiner
GAF Materials Corporation AC LANCE NO.: 97- 0804.21
1361 Alps Road APPROVED : November 4. 1997
Wayne, NJ 07470 EXPIRES : November 4, 2000
NOTICE OF ACCEPTANCE STANDARD CONDITIONS
Renewal of this Acceptance (approval) shall be considered after a renewal application has been filed and the
original submitted documentation, including test supporting data, engineering documents, are no older than
eight (8) years.
Any and all approved products shall be permanently labeled with the manufacturer's name. city, state, and the
following statement: "Metro -Dade County Product Control Approved", or as specifically stated in the
specific conditions of this Acceptance.
3 Renewals of Acceptance will not be considered if:
a) There has been a change in the South Florida Building Code affecting the evaluation of this product and
the product is not in compliance with the code changes;
b) The product is no longer the same product (identical) as the one originally approved; •
c) If the Acceptance holder has not complied with all the requirements of this acceptance, including the
correct installation of the product;
d) The engineer who originally prepared, signed and sealed the required documentation initially submitted,
is no longer practicing the engineering profession.
4 Any revision or change in the materials, use, and/or manufacture of the product or process shall automatically
be cause for termination of this Acceptance, unless prior written approval has been requested (through the
filing of a revision application with appropriate fee) and granted by this office.
5 Any of the following shall also be grounds for removal of this Acceptance:
a) Unsatisfactory performance of this product or process;
b) Misuse of this Acceptance as an endorsement of any product, for sales, advertising or any other
purposes.
6 The Notice of Acceptance number preceded by the words Metro -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the Notice of Acceptance is
displayed. then it shall be done in its entirety.
7 A copy of chi's Acceptance as well as approved drawings and other documents, where it applies. shall be
provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site
at all times. The copies need not be resealed by the engineer.
8 Failure to comply with any section of this Acceptance 'shall be cause for termination and removal of
Acceptance.
9 This Acceptance contains pages I through 41
END OF THIS ACCEPTANCE
Page 41 of 41
oaga,
Roofing Product Control Examiner
224
ROOF COVERING MATERIALS (TEVT)
ROOFING SYSTEMS {TGFU)— Continued
44. Deck: NC incline: 2 •
Foam: ' Poly -!so" or 'Poly -ISO Special with "Polyloam 251" or "Polyfoam 303 I in. mm.
Base Coat: "GacoSil S- 1000•' applied at 1 gal /sq (10 dry mils(.
Surfacing: "Gaenllex S. 1000• applied at I gal /sq (10 dry mils).
GAF BUILDING MATERIALS CORP. WAYNE NJ 07470 R1306 (N)
ASPHALT FELT SYSTEMS WITH HOT ROOFING ASPHALT
. Type G2 asphalt glass mat base sheet (" "GAFGLAS 75 Base Sheet - ) is a suitable alternate for
Type G 1 asphalt glass fiber ply sheet ( "GAFGLAS Ply 4" or "GAFGLAS PIy 6'") in the Class A. 8 or C
roof systems indicated below.
The roof deck may first.be covered with a Type G2 asphalt glass mat base sheet ' Stra-
tavent (Vent -PIy) perforated " or "GAFGLAS Stratavent (Vent -PIy) for •,actable decks ". Perforated to be
mopped and nailable to be mechanically attached granule side down.
As an option Type G2 asphalt glass mat base sheet ("GAFGLAS S75 Base Sheet " or "GAFGLAS
Stratavent (Vent•Ply) for nailable decks") may be subsiluted for 01 asphalt glass fiber ply sheet
("GAFGLAS Ply 4" or ' Ply 6 ") as the nailed base ply in the fotlowirg systems.
Bottom ply or base sheet may be solid mopped, soot mopped or mechanically fastened.
Unless otherwise indicated. all insulations may be hot mopped or mechanically fastened.
"GAFGLAS Flashing" or ' " may be used for flashing in any of the Class A. 8 or C sys-
tems listed below.
When "perlite" is referenced, this includes "GAFTEMP Perlite" or any other UL Classrlred perlite
insulation.
Crushed stone or slag ate suitable alternates for gravel in any of the Class A. 8 or C systems list-
ed.
Structural cement fiber building units are considered suitable to be included as a deck in the fol-
lowing Class A. 8 or C systems listed over C -15/32 or NC.
The use of gypsum board under any of the following Class A, B or C systems does not adversely
effect the rating. The use of 1/2 in. min gypsum board is an acceptable alternate for insulation over
C.15/32 decks.
The use of polys :yrene insulation board between min 3/4 in perlite board and deck with rosin pa-
per (perlite /rosin paper. /polystyrene /partite) is a suitable alternate for isocyanurate board in the fol.
lowing Class A. 8 or C systems.
Isotherm R may be substituted for any isocyanurate insulation in any of the following Classifica.
tions.
CLASS A. 8 end C. •
Hot roofing asphalt. for use with organic and glass felts or modified bitumen membranes.
Class A
1. Deck: C•15/32 Incline: 3
Insulation (Optional): One or more layers partite. wood fiber. glass fiber, isocyanurate, ure•
thane. perlite /isocyanurate composite. perlite /urethane composite. wood fiber /isocyanurate
composite, phenolic. any thickness.
Ply Sheet: Three or more lavers Tyne G I . "GAFGLAS Ply 4" or "GAFGLAS Ply 6 ". hot
mopped
Surfacing: Gravel.
2. Deck: C• 15/32 Incline: 2
Insulation (Optional): One or more layers perlite. wood fiber. glass fiber. isocyanurate. ure•
thane, perlite :i sncyannrate composite, perlite /urethane composite, wood fiber isocyanurate
composite. phenolic, any thickness.
Ply Sheet: Three or more layers Type G 1 "GAFGLAS Ply 4" or "GAFGLAS Ply 6 ".
Cop Sheet: One laver Type G3 'GAFGLAS Mineral Surfaced Cap Sheet".
3 Deck: NC Incline: 2
insulation (Optional): One or more layers perlite. wood fiber. glass fiber, isocyanurate. ure-
thane. perlite /isocyanurate composite. perlite/urethane Composite. wood tiber!isocyanurale
composite. phenolic. 2 in max.
Ply Sheet: Two or more layers Type G 1 "GAFGLAS Ply 4" or "GAFGLAS Ply 6 ".
Cap Sheet: One layer Type G3 "GAFGLAS Mineral Surfaced Cap Sheet ".
4. Deck: NC Incline: 1:2
Insulation: One or two layers "Isotherm R 4 in. max, hot mopped
PIy Sheet: Any UL Classified gravel surfaced Class A asphalt glass fiber mat system
5. Deck: C.15/32 Incline: I
Slip Sheet (Optional): Red rosin P. „em mated to deck.
Base Sheet: One layer of Type G2 "GAFGLAS :e75 Base Sheet" (may be °ailerl).
Ply Sheet: One or more avers of Type, G 1 "GAFGLAS Ply 4" or GAFGLAS Ply 6 ".
Can Sheet: One laver of .';ne . 3 "GAFGLAS Mineral Surfaced Cap Sheet ".
6. Deck: NC Incline: 3
Base Sheet: One layer of Type G2 "GAFGLAS *75 Base Sheet ".
Ply Sheet: One or more lavers of Type G 1 "GAFGLAS Ply 4" or GAFGI. AS Ply 6 ".
Cap Sheet: One layer of Type G -3 "GAFGLAS Mineral Surlaced•Cap Sheet ".
7. 'Deck: C•15/32' Incline: 2
Insulation: One or more lavers partite, glass fiber, isocyanurate, urethane. perlite/isocyanurate
ccinno ^rile. perlite / urethane composite, phenolic. 10 m. mm off set from plywood founts 6 in I.
Base Sheet: One or mere layers of Type 01, G2 or G3.
Membrane: One Or more layers of " Ruhero.d Torch" (smooth Or granule). "Ruhero d Torch
f lus (granule) • 'luberoid Mop" (smooth or granule) or "Ruberoid Mop Plus" (granule)
Cap Sheet: "GAFGLAS Mineral Surfaced Cap Sheet ", hot mopped.
8. Deck: C•15/32 Incline: 2
Insulation (Optional): One or more lavers perlite, wood fiber, glass fiber. isocyanurate. hire
thane. perliteiisocyanurale composite, perlite / urethane ComooSrle, wood fiber /isocyanurate
composite, phenolic, any thickness
Base Sheet: Two nr more lavers of Type 02 or 03.
Ply Sheet (Optional): One or more layers of Tyne G 1.
Mombrnne: One or more layers of "Ruheroul Torch" (smooth or granule) "Ruhero,l fareh
Plus' (granulel. 'Ouberortl Mop"' l;mnntlh or oranulel or "Ruhermd rap Plus fiJrannlel
LOOK FOR MARK ON PRODUCT
•
ROOF COVERING MATERIALS (TEVT)
ROOFING SYSTEMS (TGFU) — Conlin
Cap Sheet: "GAFGLAS Mineral Surfaced Cap Sheet", hot moaned.
Class 8
1, Deck: 0•15/32
Insulation (Optional): One or more layers
incline: 3 lr 2
v perlite. wood fiber, gta•
thane. perliteisocyanurate composite. perlite /urethane Composite
Composite. phenolic. any thickness.
Ply Sheet: Two Or more layers of Type G) "GAFGLAS PIy 4" or "GA
Cap Sheet: Type G3 "GAFGLAS Mineral Surfaced Cap Sheet' hot n
2. Deck: C 15:32 Incline: 3• t; 2
Insulation (Optional): One or more layers partite. wood fiber, glas
thane. perlile.'socyanurate Composite. perlite /urethane Composite.
composite, phenolic, any thickness.
Bose Sheet: Two or more lavers of Type G I, G2 or G3.
Membrane: One or more layers of "Ruberoid Torch" (smooth or
Plus" (granule). "Ruheroid Mop" (smooth or granule) or "Ruberoid Mr
Cap Sheet: "GAFGLAS Mineral Surfaced Cap Sheet". hot mopped.
Close C
1, Deck: C -15/32 Incline: 1/2
insulation (Optional): One or more layers perlite, wood •fiber, glass
thane, perlite /isocyanurate composite. perlite /urethane composite,
composite, phenolic, any thickness.
Ply Sheet: Three or more lavers of Type G1 "GAFGLAS Ply 4" or "G:
Surfacing: "Special Roofing Bitumen" 20 Ibs /sO.
COAL TAR FELT SYSTEMS WITH HOT ROOFING CO4
- Class A
I. Deck: C -15/32 Incline: 1/2
Insulation (Optional): One or more layers perlite. w. - • • • •
thane. perlite /isocyanurate composite. perlite / uretha
Composite, phenolic, any thickness.
Ply Sheet: Three or more lavers of Type GI "GAP
mopped with coal tar bitumen.
Surfacing: Gravel.
COMBINATION HOT AND COL
I. Deck: NC Class A
Insulation (Optional): One or more layers perlite, woof
Ply Sheet: Three or more layers of Type G 1 "GAFGLA
Surfocing: Grundy Industries "al M8 Aluminum Roof C
2. Dock: NC'
Insulation (Optional): One or more layers partite, wt
thane, perlite/isocyanurate composite, perlite /urethat
composite, phenolic. any Thickness.
Ply Sheet: Three or more layers of Type G 1 "GAFGLA:
Surfacing: "Weather Coat Emulsion" at 3 gal /sq.
3. Deck: NC
Insulation: One or two layers "Isotherm R ", 4 in.. hot r
Ply Sheet: Any UL Classified gravel surfaced Class A t
I. Deleted. Class 8
2. Deck: 0.15.32
Insulation (Optional): One or more layers perbte. we
thane, perlite /isocyanurate composite, perlite /urethat
composite, phenolic, any thickness,
Ply Sheet: Three or more layers of Type 31 "GAF(
mapped.
Surfacing: Grundy Industries "al M8 Aluminum Roof C
3. Deck: NC
Insulation (Optional): One or more layers perlite. we
thane. perhte.isocyanurale composite. perlite /urethat
composite. phenolic, any thickness
Ply Sheet: Three or more layers of Type G I "GAFGLAS Ply 4" or "GAF
Surfacing: ' Wt.rthor Coat Emulsion AF" at 7 1/2 gal /sq.
Class C
1. Dock: C.15/33
Incline: Cali- :e.
Insulation (Optional): Qne or more layers perlite. wood fiber or glass li
Ply Sheet: Three or more layers of Type G 1 "GAFGLAS Ply 4" or "GAF
Surfacing: Grundy Industries ".t1 MB Aluminum Roof Coating" at 1.1
Coat Emulsion" at 3 gal /sq.
2. Deck: C•15/32 Incline: 2
Insulation (Optional): One or more lay partite. wood fiber, glass 1
thane, Oertiie••socyanurate composite. par /urethane composite, w
compnsee. phenolic, any thickness
Ply Sheet: Three or more layers of Tyoe 31 "GAFGLAS Ply 4" or "GAF
Surfacing: Grundy Industries "al MB Alumntum Roof Coating" at I•( /2
3 Deck: C -75']2 Incline: Unlimrtec
Insulation,)Optionall: One or more •avers perlite. wood fiber, glass f
thane, pert:te`i socyanurate composite. 'perlite /urethane composite, w
Composite, pnenul :c, any thickness.
PIy Sheet: Three or more - layers of Type 01 "GAFGLAS Ply 4" or "GAF:
Sur /ncinp: - Weather Coat Emulsion" at 3 gal'sq
SINGLE PLY MEMBRANE ROOFING SYSTEMS
Unless oche rwr se indicated phenn6C insulation may be used in any of the lc
U otherwise indicated any of the lo:lowuhg Srn')Ie Pl Membrane Syste
layers ut Ruberoid Membrane.
LOOK FOR MARK ON PRODUCT
Square Ft. /00
Sign
Date:
PERMIT APPLICATION FOR MIAMI SHORES VILLAGE
Job Address /3.50 N l Tax Folio // 3ao ?3 OOd0
Legal Description w n c
One Lessee / Tenant AJ 6'EQ L CD r ( Master Permit # .34;37;2
Owner's Address
/3S /1/ /0 / Sr Phone - 757- ?D
_ D r y , ., e /o
Contracting Co. f1�'/q�1� ADD /N7 %' %'%` { -° /ad- Address /6 /YEo2 NVE gig 8. 3379
Qualifier R o F SS# Phone 9A 997
State # 6)6 ° 0271 7 Municipal # Competency # Ins.Co.
Architect /Engineer 9".s aN (.L) Address a6e0
Bonding Company Address
Mortgagor Address
Permit Type(circle one) BUILDIN ELECTRICAL PLUMBING MECHANICAL %,�" 'AVING PENCE SIGN
r
WORK DESCRIPTION Fi LAG& - /e/9 -/ZS WeiQ /AJc SCr ®o N or
7 /970/9. / oo
WARNING TO OWNER: YOU MUST RECORD A NOTICE OF COMMENCEMENT AND YOUR FAILURE TO DO
SO MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY (IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR
NOTICE OF COMMENCEMENT).
Application is hereby made to obtain a Permit to do work and installation as indicated above, and
on the attached addendum (if applicable). I certify that all work will be performed to meet the
standards of all laws regulating construction in this jurisdiction. I understand that separate
permits are required for ELECTRICAL, PLUMBING, SIGNS, POOLS, ROOFING and MECHANICAL WORK.
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will
be done plianc; with all applicable laws regulating construction and zoning. Furthermore, I
authori ,= th abov actor to do the work stated.
re of o'!'er .: nd /or Condo President
Notary as to Owner and /or Condo President
My Commission Expires:
** * * * * * * * *
FEES: PERMIT 1 14 0 RADON C.C.P.
APPROVED: Fire
Zoning Buildin
Mechanical Plumbing_
Estimated Cost(value) i-C
S.gnature o
Date:
Not y as to
My Commissio
ntractor or Owner- Builder
OFFICIAL NOTARY SEAL
KATHY MUNCY
NOTARY PUBLIC STATE OF FLORIDA
I
Expires:
NOTARY
CeMetS6i DOWO*Hee 3W _der
* * * ✓ • * *j*
TOTAL DUE / !¢`d
Other
Electrical
Engineering
• 911 Ef1S1 Allan Ilc Blvd.. Sidle 108
(305) 782-1441
1.X.)11N6ARY SURVEY OF: 14111 2, Block 1 of MIAMI SHORES BAY PARK ESTATES, according to the Plat
I hereof as recorded 1.11 Plat Book 55, Page 113, of 1 he Public: Records of Dade Could y, Florida.
ADDRESS: 1350 N.E. 101 Street:, Mthnil, Florida
BASE FLOOD CLEV: Ner.v1! 1 VI /1' ' 25°9f3.6 "" 4
1/
EJ 0.01 NGVI) GARAGE F11.X111 EIEV: 5.95'11;Vii /
0 -1/p 7
NE 104 SI:. (Approx) -- Biscayne Blvd -- 20' ± East of (11, Brass bar III •
at SE corer of bridge over 'Biscayne River Canal. Elev:-12.04'NGVD
FWD NNE: A- E
1:15WF;ST IKAISE mon
11325(1
conc handrail hale
•
VA./0
riC fs PIRE
.t..1.0.11 •
30'
7;c! nA, p.r6
CERTIFY To: -
1 )TRW Title Insurance of
New York, Inc.
2)Town A Country Title
Guaranty A Escrow
31BUYERS: Doti G. Gerloff
and Margaret A. Gerloff,
his wife
4)11ousehold Mortgage__ _
Services, Inc., its
successors
assigns.
and/or
F4'L
RON $ t MARGARET GERLOFF
PHONE 305-757-2800
1350 NE 101 STREET
MIAMI, FLORIDA 33138
1.
ACCURATE LAND SURVEYORS, INC.
12.4'
14. E 1 711
!TO' 'VI .1
i .._....t_s_: - ....... i ..• - •... !.....:- - ..-: ''': , • , .
In I I. I in
. g 9 13' A 1 7 1 .S74i 5.9" L= ,9
1 'I 1\ (
. 4 ;) ,. . j i3 _.......
f»',,:
7-7 r, rr
j I ••. .1 ,
I 1
I I
I i I '
I ; • •. •1•• ,•••• •
I I
1
0•7 21.4n' .01 •
OM !:
r
PAO
• R. 64 8. 66,
I ),
0 L
1
$
sr 2 -
!"
(K I
n 8, / 7 ewe.;
2 Cog
R= 2,/(5.40
A = 32'5S"
ti
5 60Y
7 1) 1 "1
4
•1
• 5 '••• r; ... . .
14 tr
pomp;m0 noncti, rt.
33060
r 7 # ,., • /
SE AL
NOT 1( U Vt f
5( 41. CO olt:PC wIt
ATT (MT 11050(1 t ANT,
•uv(yoPS 11, al
MOVE; ?MI (ADM. •N)*N •11 wt.!. 1401 ...... CHt0 rom owN(.111et• Otriu , 1 ot WAl O. 11••11..Nts •
CERTIFICATE THIS SURVEY IS FOR TITLE AND MORTGAGE PURPOS 0111.Y
1015 •5 TO CE•lirY THAI 1 totv, RtCeNTLY •OPTY(Y(0 OTTICIP,ITT I' Of SCR18,0 114 TN( FOK(GOIrol 11111 •r000ts *IN) II•vf
ST! OK row.° "TOPTON, Fn.( A5 ITIOICATITO ON THIS Int(TCH AND TIT( T SATO apovt comma° •1.1TIvf a''n , :vr If:14 •nt ACCIOTA TE loan
CO•KICT TO TOE Of ST or My Koos...L(0G( P.•) Ott.ltr 1 IT ontliElt fAfl MAT 11115 Stotv(v Mr1.q tot; •.41811/11.4 If r. lllll
51 *110*505 ION LAND clinvt YIN!: 1114DE5 'it., 11101.5. r • C AnorTto ay •I•of 11.0510A aoAno Of I..•eat 1 vnOt. sir? 1 ton,
— — - - -- 21 5
Bedroom . •
37
Den
FA.,c 753' - if 74
BON $ IMAM ORLON
PHONE 3015-7514n
1350tE101
WAN, FLORIDA 3313
7.5 x 16 • 120.0
26 x 41.5 • 1079.0
16.5 x 5 • 82.5
19.5 x 22.5 • 438.75
21.5 x 29.5 • 634.25
7.5 x 15.5 • 116.25
4 x 4 x 50X• 8.0
Dwelling Adj. S.F.2479
Garage 21x24x50%• 252
Total Adj. S.F. • 733T
Bath
7. 5 .
11
18.5
Living Room
36
Harmon Grnrin Associates Inc.
Bath
Dining
7.5
Room
1
Bedroom Bath
Bedroom
kitchen
24 2 -Car
Garage
21
7.5
a
b
a
n
a
81.5
PERMIT APPLICATION FOR MIAMI SHORES VILLAGE
Date i v ' Job Address ign NE /0 di- Tax Folio // 3a O3 0. 5 0 Cog 0
Legal Description n n p a
/ Lessee / Tenant 7Dfl 2 _r /o4-P Master Permit it 3 6 3 7
Owner's Address /36 NE /0/ ty11401 l' 9 SifoRSS 1 33I„31j Phone 7
Address /53 L /4 A & vr`/(.f. F 33/9
Contracting Co. villa E Po f/( /CEpr/fs //io-
Qualifier RirrA 09C4/ Phone 94L 9999
State i # Competency # Ins.Co.
Architect /Engineer Address
Bonding Company
Mortgagor Address
Permit Type(circle one)::cn ELECTRICAL PLUMBING MECHANICAL OOFING PAVING FENCE SIGN
WORK DESCRIPTION 7(e4'!2 0!4e 1100 -f (.2hove CLtM-41It 62.0 674aci/, /7) dad('
/ ,7 C-i has- -�i�/► /� �� l �C� ‘64/11
g
Square Ft. 0 8 Estimated Cost(value) /9 %�•
WARNING TO OWNER: YOU MUST RECORD A NOTICE OF COMMENCEMENT AND YOUR FAILURE TO DO
SO MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY (IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR
NOTICE OF COMMENCEMENT).
Application is hereby made to obtain a permit to do work and installation as indicated above, and
on the attached addendum (if applicable). I certify that all work will be performed to meet the
standards of all laws regulating construction in this jurisdiction. I understand that separate
permits are required for ELECTRICAL, PLUMBING, SIGNS, POOLS, ROOFING and MECHANICAL WORK.
OWNER'S APP DAVIT: I eertify that all the foregoing information is accurate and that all work will
be done omplian•- /th a j applicable laws regulating co � ruction and zoning. Furthermore, I
author he abo =, ame• ractor to do the work stated.
Si re of
Date:
o• er and /or Condo President
No ary as to
My Commission
otRON L A TINME ide
q p : : MY COMMISSION 0 CC 304461
EXPIRES: August 2, 1997
"14:4 •� Bonded Mu Notary Public Undo inters
t
** * * * * * * * *
FEES: PERMIT 040 RADON C.C.F.
APPROVED: Fire
Zoning Buildin
Mechanical Plumbing
Address
S'gnature o
ate:
Notary as racOMMN 1f l(MMME - Bu
My COmml s s g " r �1 80MMISSION # CC 304481
r „L
WIRES: August 2. 1997
'(P ;t1, Bonded Pau Notary PIA* linden/den
4 +- _
* * * * * *
tractor or Owner- Builder
der
NOTARY TOTAL DUE l I f
**
Other
Electrical
Engineering
36
NAILABLE DECKS (WOOD)
516 TAM -GLASS PREMIUM 616 TAM-PLY IV
(Regions 1, 2, & 3)
TAMKO FIBERGLASS
PLY SHEET
ASPHALT
INTERPLY MOPPINGS 440_A TYPE 43
COATED BASE
TAMKO
�h4h .i�
SURFACE
COAT � /
WOOD
DECK
Material Requirements
)( TAMKO TYPE 43 Coated Base Sheet or VERSA -BASE Base Sheet 1 Ply
TAMKO TAM -GIASS PREMIUM or
)( TAM -PLY IV Fiberglass Ply Sheet 3 Plies
Interply Asphalt (Per 100 sq. ft.) Approx. 69 lbs.
Surface Coat (Per 100 sq. ft.) Fibered Aluminum Coating
(2) Emulsion Coating 1 -1/2 to 2 gals.
(3) Asphalt Surface 3 mss.
20 to 25 lbs.
Clinch -type nails '(Per 100 sq. ft.) Approx. 100 Nails
Slope: Positive drainage up to 3 in. per linear ft. For slopes above 1 in. per linear
R, fastening of the roofing felts is required (see Section 9.0).
Deck: The deck should conform to TAMKO general requirements (see Section 4.0).
Asphalt The asphalt should be certified by the manufacturer to meet ASTM D -312,
Type I1 for slopes up to 1/2 in. and Type 111 for slopes up to 1 in. (see
Section 11.0).
TYPE 43 Coated Base Sheet or VERSA -BASE Base Sheet Starting at the low
point of the roof, install 1 ply of TAMKO TYPE 43 Coated Base Sheet or VERSA -
BASE, side lapped 2 in. and end lapped 4 in. Apply at a right angle to the slope of the
roof. Nail the sheet along the lap at intervals of no more than 9 in. Stagger -nail on 18
in. centers along 2 lines located 12 in. from each edge of the base sheet (see Sec-
tion 10.0).
Fiberglass Ply Sheets: Over the base ply, install 3 plies of TAMKO TAM -GLASS
PREMIUM or TAM -PLY IV Fiberglass Ply Sheet in specification asphalt. Starting
from the low point of the roof, apply a 12 in. width, then a 24 in. width, and follow with
full 36 in. widths, shingle fashion, lapping each ply 24-3/4 in. in such a manner so that
at least 3 plies of ply sheet cover the base ply at any point. Approximately 23 lbs.
(t15 %) of specification asphalt per 100 sq. ft. should be used to embed each ply (see
Section 8.0).
Surface Coat Coat the entire roof surface with Fibered Aluminum Roof Coating at a
rate of 1 -1/2 to 2 gals. per 100 sq. ft, or Emulsion Roof Coating at a rate of not less
than 3 gals. per 100 sq. ft., or a surface grade hot asphalt using a minimum of 20 lbs.
and a maximum of 25 lbs. per 100 sq. ft. Maintenance of the surface coating is
required. (See Sections 12.0, 13.0 and 32.0.)
Flashing: The flashing material must be a TAMKO polyester reinforced modified
asphalt flashing material (see Section 31.0).
U.L Class A Requirements:
Combustible deck: minimum 1/2" plywood, tongue - and - groove decks, etc.; maxi-
mum slope 1 -1/2 ".
Insulation: none.
Surfacing: emulsion coating only.
Contact TAMKO for a list of accepted coatings or for further information on other
U.L systems.
(Regions 1, 2, & 3)
See Section 33.0 for TAMKO Systems Guarantee Durations
06 -16 -1994 10749 303-
METRO -DADE
Tamko Asphalt Products, Inc. (BUR)
220 West Fourth Street
P.O. Box 1404
Joplin, MO 64R02
ACCEPTANCE No
EXPIRES: NOV 0 8 1996
APPROVED: NOV 0 8 1993
* *PLEASE NOTE **
METROPOLITAN LADE COUNTY, FLORIDA
METRO -DADE FLAGLER BUILDING
PRODUCT CONTROL NOTICE OF ACCEPTANCE
BUILDINQ CODE COMPLIANCE DEPARTMENT
SUITE 1603
ME O— ADE FLAGLER BUILDING
140 WEST FLAGLER STREET
MIAMI. FLORIDA 33130.1543
(305) 375 -2901
FAX (305) 375.2908
Your application for Product Approval of Tamko Membrane Roofing Products under Cha ;ter 8 of
Metropolitan Dadc County Code governing the use of Alternate Materials and Types of Ccrostruction,
and completely desc:ibed in the plans, specifications and calculations as submitted by Taco Asphalt
Products, Inc., has been recommended for acceptance by the Building Code Compliance C Mee to be
used in Dade Count), Florida under the Specific Conditions set forth ' • ::e t seq.. in the
Standard Conditions detailed on page 3.
'i1 Diamond, P.E.
Product Control Division
SupervisorC '
THIS IS THE COVERSHEET, SEE ADDITIONAL PAGES FOR SPk:CLFIC
AND GENERAL CONDITIONS.
This application for Product Approval has been reviewed by the Metropulitan Dadc Cou 1ty building
Code Compliance Department and approved by the Building Code Committee to be usec in Dade
County, Florida under the conditions set forth above.
Charles Danger, P
Director
Building C:odc Compliant a Department
Metropolitan Dade Count.
P. 02
06 -16 -1994 10;49 305-
'
Manufacturer;
Contact'
Trade Names of Products
Manufactured by Applicant:
Versa -Flash 160TM
Tani Glass Premiumh
Tani -Ply IVTu
Glass-Base
METRO -DADE BUILDING CODE COMPLIANCE
PRODUCT APPROVAL SECTION
Dodie Webster
(417) 624 -6644
Ext. 257
ROOF SYSTEM APPROVAL
Tamko Asphalt Products, Inc. (BUR)
220 West Fourth Street
Joplin, MO 64801
Product Control No.: 93
Type: Roof Membrane Systems (BUR)
Roofing System Type: Asphalt (BUR)
Generic Material: BUR
Acceptance Number 93-0525.3
Approved: NOV 0 8 1 g y J
Expires: NOV 6 8 1996
P. 0 3
A 180 g/m polyester reinforced SBS
modified Bitumen flashing membrane
surfaced with graatules. Applied in hot
asphalt or cold a4hesive. Roll weight:
91lbs.; Dimensions: 33' 4" x 36 ".
A fiberglass reinforced asphalt bast ply
sheet. Applied by hot asphalt. Roll
weight: 53 lbs.; Dimensions: 180' x
36 ".
A fiberglass reinforced asphalt base ply
sheet. Applied b►,' hot asphalt, Roll
weight: 44 lbs.; *Dimensions: 180' x
36 ".
A fih rrglas ein'orced asphalt base p1
Gil Diamond, P.E.
06 -15 -1994 10:50
305-
Trade Names of Products
Manufactured by Applicant:
Vapor- Cluny.'
Type 43 Base Sheet
Base -n -Ply
Tam -CapTM
Awaplan PremiumTM
Awaplan Heat Welding
Acceptance N
Approved: Nov
Expires: Nov
sheet. Applied
mechanically
72 lbs.; Dimensi
A fiberglass re'
sheet bottom
granules_ Appli
mechanically
vent vapor p
decks. Roll wei
Dimensions: 36
An organic felt
sheet. Applied
mechanically f
85 lbs.; Dimensi
A fiberglass rei
Bitumen base s
asphalt. Roll w
Dimensions: 10
A fiberglass rei
surfaced with gr
asphalt. Roll
Dimensions: 36
A 250g/ml po1
Modified Bitum
with granules .
material and ap
cold adhesive.
Dimensions: 3
used as a wa
A 250 g/m pol
modified Bitum
with granules.
material and a
weight: 96 lbs.;
Gii Di ; -.r erld. P.
93 -0525.3
08 1993
8 1996
P. 04
hot asphalt or
ened. Roll weight:
ns: or x 36".
orced asphalt base ply
cc embedded with
by hot asphalt or
ened. Also used to
over insulating
t: 86 lbs.;
x 36 ".
inforced asphalt base
hot asphalt or
erred. Roll weight:
ns: 72' x 36 ".
orced SBS modified
t. Applied by hot
ght: 72 lbs..
'x36 ".
reed asphalt capsheet
ales. Applied by hot
'ght: 81 lbs.;
x 36 ".
CT reinforced SBS
n membrane surfaced
sed as a flashing
lied in hot asphalt or
oll weight: 101 lbs.:
3/8" x 33' 11". Also
y material
ster reinforced SBS
n membrane surfaced
sed as flashing
lied by torch. Roll
Dimensions: 25' 5" x
06 -16 -1994 10:50 305 -
Trade Names of Products
Manufactured by Applicant:
Awaplan 170 A I80 g/m polyester reinforced SBS
modified Bitumen membrane surfaced
with granules. Used as flashing
material and applied in hot asphalt or
cold adhesive. loll weight: 98 Ibs. ;
Dimensions: 33' 11" x 39 3/9".
AwapIan Premium FRT`" A 250 g/m polyester reinforce
modified Bitumen membrane sufaced
with granules. Ueed as flashing
material and applied by hot asphalt and
also used as walkway material. Roll
weight: 101 lbs.; Dimensions: 33' 11"
x 39 3/8 "
Awaplan 170 FRTU Plashing material
Acceptance Numbe': 93 -0525.3
Approved:
Expires:
Roy 0 8 1993
NOV 0 8 19g6
39 3/8 ". Also used as walkway
material.
P.05
06 -16 -1994 10751 305-
, .•,,:
Trade Names of Products
Manufactured by Others:
Company /Applicant
Tamko Asphalt Products,
Inc, (BUR)
METRO -DADE BUILDING CODE COMPLIAN
PRODUCT APPROVAL SECTION
Product Name
FM -90, FM -60, FM-45
SFS/Insulfirot®
Tapcon®, Poofgrip ®,
Gripdek®
#12 Annular Ring Shank
32 ga. (.010 ") x 1 5/8" Tin
Caps
Approved:
Expires:
Product Description
Base ply attachment
Insulation attachment
Insulation attachment
Base ply attachment
ASTM D -312 Asphalt type Bonding and watcrpr
Ill & type II ahesive
Deckfast #14 & !!15 Insulation attachment
Tru -Fast #12 and #14 Insulation attachment
Con -Titc, Concrete Screw Insulation attachment
GaftiteTM Fasteners Insulation attachment
Olympic Base Ply Fasteners Base ply attachment
Glastfastm & Glastfastmt Insulation attachment
Striker
Rawl Drive and Spike6t) Insulation attachment
Zamac® Nailin Perimeter terminator
(See FM listings for approved insulation fasteners with specific insulation panels.)
Ameptance Num • r: 93 -0525.3
Gil Diamond, P.
P. 06
No 0 8 1993
0 8 1995
Manufacturer
ES Products
Fabco /SFS
ITW Buildex
Generic
Generic
Generic
Construction
Fasteners, Inc.
Tru -Fast
Olympic Screw
GAF Corp.
Olympic
Manufacturing Grour
Owens Corning
The Rawlplug
Company, Inc.
The Rawlplug
Company, Inc.
06 -16 -1994 10:51
f•t.,
Trade Names of Products
Manufactured by Others:
Company /Applicant
305- P. 07
Acceptance N
Approved:
Expires:
93 -0525.3
0 8 1993
0 8 1998
Product Name Product Description Manufacturer
Speed -Lok Toggle Insulation attachment The Rawlplug
Company, Inc.
Lok-Solt and Steel Plate 'mutation attachment The Rawlplug
Company. Inc
Berryfast Tapefast Basesheet attachment Berryfast
Olympic Fasteners Insulation attachment Olympic
Manufacturing Grout
Loxsueo Clips w/ Discs Insulation attachment International
Permalite
Perrna- Fastener Insulation attachment International
Permalite
Asbestos Fibered Asphalt Roof coating Monsey Products
Emulsion
Karnak No. 97 AP Roof coating Karnak Chemical
Corporation
Fibered Asphalt Emulsion Roof coating Grundy
Fibered Asphalt Emulsion Roof coating Pure Asphalt
Roof Coating
Fibered Aluminum Roof Roof coating Grundy
Coating
Henry 520 Aluminum Roof coating Henry Co.
Fibered Aluminum Roof coating Grundy
Anchorbond Fasteners Insulation attachment Celotex Corporation
20 F- AF Emulsion Roof coating. Grundy
(See PNI listings for approved insulation fasteners with specific insulation panels.)
Gil Diamond, P E.
06 -16 -1994 10 :51 305- P.08
• r �
Trade Names of Products
Manufactured by Others:
Company /Applicant
Product Name Product Description
Endure - Premium aluminum Roof coating
Weather -Chek Aluminum Roof coating
Pro -Grade Aluminum Roof coating
Asphalt Emusion Fibered Roof coating
Endure Emulsion Mastic Roof coating
Emulsion Roof Roof coating
Coating - Fibered
Premium Long Life Roof coating
Aluminum -AF
(See FM listings for approved insulation fasteners with specific insulation panels.)
Acceptance Number 93.0525.3
Approved: 0 6 1993
Expires: 110 0 8 1996
Gil Diamond, P
Manufacturer
Monsey Products
Money Products
Mousey Products
Monsey Products
Monscy Products
Monsey Products
Monscy Products
MIAMI SHORES VILLAGE
BUILDING AND Z NI G DEPARTMENT
DATE: �lJ��a79T /
"HOLD HARMLESS" LETTER
Gentlemen:
Re: Property located at (address and legal description):
/3 /1/C /0/ S i .
As legal owner of subject property, I request the cancellation of
permit n issued to 7 1 7- 5 Roo F /A)
on S .a1 , for the following reason:
E WAS A 10 T / c ii/d` D -7 2 0 TYE RAFTCfZ.
E9,kAC7n T Wo/Zk RCOoi,2.caJ
I hereby apply s owner - builder, or auth�
LC/(/ / k' p 0 F � JS o�
to apply for such permits as are necessary to construct or complete
the construction on subject property.
I agree to hold /- r4'/,1i J 4 ores V /4-Z/964-_- harmless and relieve
it from any responsibility or liability for any legal action or
damage resulting from the cancellation of the existing permit or
the issuance of a new permit. I furthermore assume responsibility
for the correction, if required, of work performed under the permit
for which I an requesting cancellation.
Very :Z my yours,
�.� .(sign)
O 7 r��2ca�F (print)
STATE OF FLORIDA)
SS:
COUNTY OF DADE)
The undersigned, being the first duly sworn, deposes
and says that he /she is the legal owner of the above
property.
Sworn to and subscribed before me this /6 day of
Notary Public, State of Florida at Large
/99f
4.9,Y Poo KATHIE CARLIS
��� • COMMISSION # 03 8 87
. • EXPIRES JUL 20CC 3, 1997
`' � � Atlantic Bonding Co., Inc.
I nc F�0 Pnn_7 ?? -2 245
TO MIAMI SHORES VILLEDGE May 27, 1994
Subject: Roof repair at 1350 NE 101 St.
Don Gerloff releases J. B. Roofing from the contract to
repair his roof at 1350 NE 101 St. and authorizes Unique
Roofing & Repairs, Inc. to do the job.
Don Ger
di A40%
. B. Roofing
Joshua Bellamy, Owner
BUILDING p MIAMI SHORES VILLAGE, FLORIDA hq
ELECTRICAL p Date
PLUMBING ❑ PERMIT N9 `' +' 5 6
ROOFING Er
❑ ( Work to be performed under this Permit
�"
1eit L66
Owner of
Building
Architect
Contractor
or Builder
Legal
Description
Address of
Building
Lot
,Q /t 6 Gi s
/ 3SO /0E, `0 L.C
D
CONTRACTOR or DER
11 BI �
Contractor's
License No.
, J a L2i .4cA10.9.PJ Ae
11 41 --a 4.• EatV-fleeL
aMe/ - ∎ C te'
/1 3 3 S
2 — 3 o od d �g
Subdi- a f/ �i
vision its 4 `^" i s #014
Sq Ft
Value of of) �I Amount of /. o U
Project $ / OU II Permit $ ,34.00
This permit is granted to the contractor or builder named above to construct the building or to install the equipment or device described in the applica-
tion herefor in strict compliance with all ordinances pertaining thereto and with the understanding that the work will be performed in compliance with any
plans, drawings, statements or specifications That may have been submitted to and approved by the proper municipal authorities. This Permit may be revoked
at any time if the work is not done in compliance with such ordinances or if the plans are changed without authorization. A further condition upon which this
permit is granted is the understanding that the contractor or builder named above assumes the responsibility for a thorough knowledge of the ordinances and
regulations pertaining to the work covered hereby whether shown on the plans or drawings or in the statements or specifjeA ons a c (that he assumes respon-
sibility for work done by his agents, servants or employees.
BY
AUTHORITY
Signed• (INSPECTOR) BY .
In consideration of the issuance to me of this permit I agree to perform the work covered hereunder in compliance with all ordinances and regulations
pertaining thereto and in strict conformity with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village.
In accepting this permit i assume responsibility for all work done by either, myself, my agent, servant or employee.
PERMIT APPLICATION FOR MIAMI SHORES VILLAGE
Date S- /g'' 9// Job Address /350 /y' L' /V/ S/iQtZ /• Tax Folio //- 3 Zos= 01 .3'4, 95
Legal Description Z47 ak / w/o .5h 6Ar /"RieK 1s`1 7<S Pe.5-s /83
Owner / Lessee / Tenant DOM G Clt,L o F .
Owner's Address 1 3 5 - 0 Al • L /0 / S 1
Contracting Co. J ' 13 120D F /til
Qualifier J oS l4u e 261,14171y N(y SS # Phone
State #000DL9Z6 Municipal #IN-167 Competency #CC /7 //6 Ins .Co .B /3C4 / NL S /DI2G -s Ak3
Architect /Engineer Address
Bonding Company Address
Mortgagor Address
Permit Type(circle one): BUILDINGG ELECTRICAL PLUMBING MECHANICAL OOFIN PAVING FENCE SIGN
WORK DESCRIPTION 1 /qQ d �t aoI �' r pot 1 a Sill 004 t.JO I� aio& c -PQC-e'
(Vplace r otl v) 133ozJ. Qe pl a ce u.) \ \ -- t bel la (lea aLLyvi 1 4 u m
Square Ft. • 0'0 SO ,/ ` Estimated Cost(value) 1, DS 0 V
WARNING TO OWNER: YOU MUST RECORD A NOTICE OF COMMENCEMENT AND YOUR FAILURE TO DO
SO MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY (IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR
NOTICE OF COMMENCEMENT).
Application is hereby made to obtain a permit to do work and installation as indicated above, and
on the attached addendum (if appl; cable): I certify that all work will be performed to meet the
standards of all laws regulating construction in this jurisdiction. I understand that separate
permits are required for ELECTRICAL, PLUMBING, SIGNS, POOLS, ROOFING and MECHANICAL WORK.
OWNER'S AFFID
be done i. co
authori th
N•tary as to Owner and
My Commission Expires:
** *
APPROVED:
VIT: I certify that all the foregoing information is accurate and that all work will
pliancy ith all app cable laws regulating construction and zoning. Furthermore, I
abov j / %ontr:' to do the work stated.
Signature of o er a or C
Date:
0 th`
• a r
:n:o President
NANCY DE LA TORRE
1
Peristsiliebt 2, 1997
Bonded Tin Noy Public Undwaitere
* * * * *
FEES: PERMIT ' 3 4 ° 6 RADON C.C.F.
Mechanical
Master Permit #
Phone " /s 7- bb
Address 3 QD t • I 7 - re - ea (V)1 a 41
* * *
( s - 8
$ mature � f Contracto
Date: S /G`1
Notary as to. Cgnt crltalnerreitilider
My Commission
� ', r SCOTT W DAVIS
N ' COMMISSION NUMBER
I ' C C255237
17 , e , "' �� MY COMMISSION EXP.
* OF Fv J J . 25,1997 s*
NOTARY S o ° TOTAL DUE 36`
Fire Other
Zoning Building Electrical
Plumbing Engineering
•
1
Three -Ply Gravel Surface
For use directly over wood, plywood, gypsUrn, structural
wood fiber or other approved nai!able decks.
(Limited to Geographical Area 2 sr owrvn on page 14)
Spec. No. G /A -3 -W -G (L IMfTED SERVICE WA FANTY ONLY)
Incline: Maximum 3 inches per foot.
Celotex Materials per square of roof area
Vaporbar GB'" Base Sheet
Celo -Glass Ply Sheet
Asphaltt
Top Pouring: IAsphait;t
Surfacing: slag
gravel or marble chips
1 p'y
2 plies
approx. 50 lbs.
approx. 60 lbs.
300 its. min.
400 lbs. min.
tOn inclines more than'/ inc, per foot, use Steep Asphalt between
plies and as a top pouring.
MEMBRANE SYSTEM COMPLIANCE
Above specification.. when constructed as recommended, com-
plies with UL Class A to 3 inches der foo' on non- combustible
decks, and combustible decks (including 4 .5/32 inch plywood).
APPLICATION
"General Requirements" and "Roof Deck Reouirernents" are part of
t this specification.
1. Starting at the low point, apply one piy of Vaporbar GB Base Sheet
over the entire surface, lapping each sheet 2 inches minimum over
the underlying sheet. Lap ends 3 inches minimum. Nail along the lap
at maximum 9 inch intervals and stagger -nail down the center of the
sheet in two rows with nails spaced at 18 inch intervals in each row
(approx. 90 nails per square).
2. Starting at the tow point, embed 2 plies of Celo -Glass Ply Sheet in
uniform moppings of hot asphalt (18 -30 lbs. per ply per square). Use
starting strips cut 18 inches wide followed by full width sheets. Lap
each sheet 19 inches over the preceding sheet and embed full width
of sheet in a coating of asphalt (18 -30 lbs. per square) so that felt
does not touch felt. Lap ends 3 inches minimum. Broom In ply
sheets with a'soft broom or squeegee.
3. Extend roofing sheets up face of cart and cut off evenly at wall line. 2).
4. On inclines 1 inch per foot or more, back ^au all plies (see p g 1 2).
5. Over entire surface, apply a uniform top pouring
lbs. per square) into which surfacing material is embedded.
Three -Ply Smooth Surface
For use directly over wood, plywood,
wood fiber or other approved nail
(Limited to Geographical Area 2 shown on
Spec. No. G /A - 3 - W - S (LIMITED SERVICE V /ARRANTY 0
Incline: Maximum 9 inches per foot.
Vaporbar GB'" Base Sheet
Celo -Glass Ply Sheet
Asphaltt
Surfacing coating:
SNO -TOPP Roof Coating or
Fibrated Aluminum Roof Coating
07500 /CEK
BuyLine 1218
psum, structural
le decks.
age 14)
•TOPP'
Roof Coating
Fibrated Aluminum
Roof Coating
Cetotex Materials per square of roof area
1 piy
2 plies
approx. 50 lbs.
approx. 1.2 gals.
approx. 1.8 gals.
tOn inclines more than 1/4 inch per foot, use Steep Asphalt between
plies. • 1 . .,
MEMBRANE SYSTEM COMPLIANCt
Above specification. when constructed as recommended, com-
plies with UL Class A to 1 inch per foot on rion- combustible decks,
aro Class C to 1/2 inch perloot on combustible decks (including
15/32 inch plywood), using Fibrated Aluminum Roof Coating.
APPLICATION
"General Requirements" and "Rot Deck Requirements' are part of
this specification.
1. Starting at the low point. apply one ply of Vaporbar GB Base Sheet
over the entire surface, lapping each sheet 2 inches minimum over
the underlying sheet. Lap ends 3 inches minimum. Nail along the lap
at maximum 9 inch intervals and stagger -nail down the center of the
sheet in two rows with nails spaced at 18 inch intervals in each row
(approx. 90 nails per square).
2. Starting at the low point, embed 2 plies of Celo -Glass Ply Sheet in
uniform moppings of hot asphalt (18-30 lbs. per ply per square). Use
starting strips cut 18 inches wide followed by full width sheets. Lap
each sheet 19 inches over the preceding sheet and embed full width
of sheet in a coating of asphalt (18 -30 lbs. per square) so that felt
does not touch felt. Lap ends 3 inches minimum. Broom in ply
sheets with a soft broom or squeegee.
3. Extend roofing sheets up face of cant and cut off evenly at wall line.
4. On inclines 1 inch per foot or more, backnail all plies (see page 12).
5. After 24 hours apply two roller coats of SNO -TOPP (1.5 -2.0 gat3 .
per square) or Fibrated Aluminum Roof Coating (0.8 -1.5 gal. per
square) directly to the Celo -Glass Ply Sheets.
25
Registered Architect and /or Engineer
Name and address of licensed contractor
Location and legal description of lot to be built on:
Disapproved
(Signed)
MIAMI SHORES VILLAGE
BUILDING INSPECTION DEPARTMENT
APPLICATION FOR BUILDING PERMIT
Application is hereby wade for the approval of the detailed statement of the plans and specifications herewith submitted for the build -
ing or other structure herein described. This application is made in compliance and conformity with the Building Ordinance of Miami
Shores Village, Florida, and all provisions of the Laws of the State of Florida, all ordinances of Miami Shores Village and all rules and
regulations of the Building Division of Miami Shores Village shall be complied with, whether herein specified or not. A copy of approved
plans and specifications must be kept at building during progress of the work.
Date..._ q/
Owner s Name and Address A 4 ...... „. _. No.. .. Street._.I.C�. .....f 0L. r ..._.
Lot Block Subdivision
Street and Number where work is to be done
1350 NZ. 101 44
Date.._
Chairman
Member
Member ...... ...... - --_.�...._
Council Approved Date
NOTE: A charge of $1.00 will be made for
the Planning Board.
A re fee of $1.00 will be charged
materials and /or workmanship.
Leap 4. ?QQ 119 02,
PLANNING BOARD
— 802 , .� .
State work to be done and purpose of building (by floors)
...Recnvve..2.xci.a#,i a ../ryv,�u .- and... in-- ramp...diulrt ..t ...__ /x?.c �eLi ►rlv,p on 2 -15 anti. mop on
note Found 41.aie. 1Y -1 Q.M.1 .... and for no other purpose.
New Building Remodeling Addition Repairs No. of Stories
To be constructed of Kind of foundation Roof Covering
Estimated Total cost of improvements $....7 /QQ..QQ Amount of Permit
Zone cubage required _Plan Cubage
Distance to next nearest building Size of Building Lot
Jfaxirnum live load to be borne by each floor
I hereby submit all the plans and specifications for said building. All notices with reference to the building and its construction may
be sent to 800..1. ....
The undersigned applicant for this building permit does hereby certify that he understands and accepts his obligations as an employer
of labor under the Florida Workmen's Compensation Act, being Section 5966, Compiled General Laws of Florida, Permanent Supplement,
and has complied with the provisions thereof, and will require similar compliance from all contractors or sub - contractors employed ,by him
in the work to be performed under this permit; and will post or cause to be posted for inspection on the site of the work such public notice
or notices as are required by the Act. The undersigned agrees to employ only such subcontractors, on work to be performed under this
pennit, as are licensed by Miami Shores Village.
Re:narks (Signed) X
tZ
STATE OF FLORIDA, 1 an.
COUNTY OF DADE. j ss.
Before me, the undersigned authority, a notary public, duly authorized to administer oaths and take acknowledgments, personally ap-
peared
Notary Public, State of Florida
Building nspector My Commission Expires
.DATE
3 3 1( 9 1
to me well known,
and who, being by me first duly sworn, upon oath deposes and says that he is the.
of the above described construction, that he has carefully read the foregoing application, and that he did sign the same, and that all facts
therein by him s t�e true.
Permit No.__. ` L Date i ) 0 Read, Sworn to and Subscribed before me.
Member
Member
Member w - _ -,. -
Disapproved Date
making corrections or changes to this application after approval has been obtained from
when such re- inspection is made necessary by Improper notice for inspection or faulty
•
Application is hereby mode for the approval of the detailed statement of the plans and specifications herewith submitted for the build -
ing or other structure herein described. This application is made in compliance and conformity with the Building Ordinance of Miami
Shores Village, Florida, and all provisions of the Laws of the State of Florida, all ordinances of Miami Shores Village and all rules and
regulations of the Building Division of Miami Shores Village shall be complied with, whether herein specified or not. A copy of approved
plans and specifications must be kept at building during progress of the work.
2 Squares
Date..._........_..... _ ._ _..QPIII3 . 19.22
Owner's Name and Address Mr. Don Gerloff .., .. „.,_ ._. No.13.50 . Street AN E, 101st Street
Registered Architect and /or >yngincer
..::.. ... .... ........ . < .... ...,:.,,,, -- ._sass.
Name and address of licensed contractor... Lam.. .80Qfing.- &...Tile..Clo...,.... Irate -..- 2a it .W.... -7.1st,...Mi.a..,...Fla.. 33150
Location and legal description of lot to be built on:
Lot Block Subdivision sass_
Street and Number where work is to be done 13,5Q...N-..F',r....1Qa.iat . t2e . -
State work to be done and purpose of building (by floors)..2artial 13.QxOQ '
rear of house, tin cap 1 -30# felt to sheathing, mop 3 -15# felts with hot asphalt and apply
3..... ayer... o- f..- graYel...emhedded...into -.- hat -. a Ala.? t. and for no other purpose.
New Building Remodeling Addition Repairs
REROOFING No. of Stories
To be constructed of Kind of foundation Roof Covering.,S -P.ly Gxavel
Estimated Total cost of improvements $.695.00 Amount of Permit $&12...5Q
Zone cubage required Plan Cubage
Distance to next nearest building Size of Building Lot
Jfaxirnum live load to be borne by each floor
I hereby submit all the plans and specifications for said building. All notices with reference to the building and its construction may
be sent to
The undersigned applicant for this building permit does hereby certify that he understands and accepts his obligations as an employer
of labor under the 'Florida Workmen's Compensation Act, being Section 5966, Compiled General Laws of Florida, Permanent Supplement,
and has complied with the provisions thereof, and will require similar compliance from all contractors or sub - contractors employed by him
in the work to be performed under this permit; and will post or cause to be posted for inspection on the site of the work such public notice
or notices as are required by the Act. The undersigned agrees to employ only such subcontractors, on work to be performed under this
permit, as are licensed by Miami Shores Village.
Remarks (Signed). _ _...._.__..�..
S. E. Gambill, President
Lang Roofing & Tile Co., Inc.
STATE OF FLORIDA,
COUNTY OF DADE. ss.
Before me, the undersigned authority, a notary public, duly authorized to administer oaths and take acknowledgments, personally ap-
peared _..
and who, being by me first duly sworn, upon oath deposes and says that he is the.
of the above described construction, that he has carefully read the foregoing application, and that he did sign the same, and that all facts
therein by him siate a
P
7
ermit No.._.... // ` Date ! 7 Read, Sworn to and Subscribed before me.
Disapproved Date
Notary Public, State of Florida
(Signed)
MIAMI SHORES VILLAGE
BUILDING INSPECTION DEPARTMENT
APPLICATION FOR BUILDING PERMIT
Building nspcctor
y Commission Expires
to me well known,
PLAN NC BOARD DATE
Chairman Member
Member Membcr
Member sass.. _....._..__._ sass_ Member
Council Approved Date Disapproved Date
NOTE: A charge of $1.00 will be made for making corrections or changes to this application after approval has been obtained from
the Planning Board.
A re-inspection fee of 51.00 will be charged when such re- inspection is made necessary by improper notice for inspection or faulty
materials and /or workmanship.
MIAMI SHORES VILLAGE, FLA.
JOB
4 ))
ADDRESS I
INSPECTION n_d 0■ ,r)
TIME READY te ?
REMARKS:
0 wA-/S 7 -t
N9 7880
INSPECTOR DATE
MIAMI SHORES VILLAGE
BUILDING INSPECTION DEPARTMENT
APPLICATION FOR BUILDING PERMIT
Application is hereby made for the approval of the detailed statement of the plans and specifications herewith submitted for the build-
ing or other structure herein described. This application is made in compliance and conformity with the Building Ordinance of Miami
Shores Village, Florida, and all provisions of the Laws of the State of Florida, all ordinances of Miami Shores Village and all rules and
regulations of the Building Division of Miami Shores Village shall be complied with, whether herein specified or not. A copy of approved
plans and specifications must be kept at building during progress of the work.
Date August 1, 19 58
Owner's Name and Address Guy Butt No X350 Street N.E. 1 St.
Registered Architect and /or Engineer
Name and address of licensed contractor Sheet Metal Spec. Co., 573 N.W. 71st St., Miami 50,
Location and legal description of lot to be built on: Fla •
Lot Block Subdivision
Street and Number where work is to be done 1350 .N....._E'--s.:.._...101.9. Street
State work to be done and purpose of building (by floors)
Roofing addj.t_j01- to x'esj,dence
and for no other purpose.
New Building Remodeling Addition X Repairs No. of Stories One
To be constructed of C • B • S • Kind of foundation Roof Covering built up
Estimated Total cost of improvements $ 95,00 Amount of Permit $..__5.
Zone cubage required plan Cubage
Distance to next nearest building Size of Building Lot 3 Sqs .
Maximum live load to be borne by each floor
I hereby submit all the plans and specifications for said building. All notices with reference to the building and its construction may
be sent to
The undersigned applicant for this building permit does hereby certify that he understands and accepts his obligations as an employer
of labor under the Florida Workmen's Compensation Act, being Section 5968, Compiled General Laws of Florida, Permanent Su1plemnent,
and has complied with the provisions thereof, and will require similar compliance from all contractors or sub - contractors employed by him
in the work to be performed under this permit; and will post or cause to be posted for inspection on the site of the work such public notice
or notices as are required by the Act. The undersigned agrees to employ only such subcontractors, on work to be performed under this
permit, as are licensed by Miami Shores Village.
Remarks (Signed) SHEET METAL SPECIALTY COMPANY
STATE OF FLORIDA,
COUNTY OF DADE. ss
Before me, the undersigned authority, a notary public, duly authorized to administer oaths and take acknowledgments, personally ap-
peared
to me well known,
and who, being by me first duly sworn, upon oath deposes and says t t he is the.
of the above described construction, that he has carefully read the regoing application, and that he did sign the same, and that all facts
therein by him stated are true.
7
Permit No
Disapproved
( Signed)
Building In
or
Read, Sworn to and Subscribed before me.
Notary Public, State of Florida
ommission Expires
PLANNING BOARD DATE
Chairman .. Member
Member Member
Member Member
Council Approved Date Disapproved Date
NOTE: A charge of $1.00 will be made for making corrections or changes to this application after approval has been obtained from
the Planning Board.
A re- inspection fee of 51.00 will be charged when such re- inspection is made necessary by improper notice for inspection or faulty
materials and /or workmanship.
BUILDING
ELECTRICAL
PLUMBING ❑
ROOFING
Owner of
Building
Architect
Contractor
or Builder
Legal Lot II BL
Description.
Address of
Building
CONTRACTOR OR BUILDER
MIAMI SHORES VILLAGE, FLORIDA
❑ PERMIT N? 14811
0 Work to be performed under this Permit
Subdi-
vision
Value of
Project $
This permit is granted to the contractor or builder named above to construct the building or to install the equipment or device described in the application
herefor in strict compliance with all ordinances pertaining thereto and with the understanding that the work will be performed in compliance with any plans,
drawings, statements or specifications that may have been submitted to and approved by the proper municipal authorities. This Permit may be revoked at any
time if the work is not done in compliance with such ordinances or if the plans are changed without authorization. A further condition upon which this permit is
granted is the understanding that the contractor or builder named above assumes the responsibility for a thorough knowledge of the ordinances and regulations
pertaining to the work covered hereby whether shown on the plans or drawings or in the statements or specifications and that he assumes responsibility for work
done by his agents, servants or employees.
Signed • ".. BY
DATE 195
Contractor's
License No
Amt. of
Permit $
INSPECTOR
In consideration of the issuance to me of this permit I agree to perform the work covered hereunder in compliance with all ordinances and regulations
pertaining thereto and in strict conformity with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village.
In accepting this permit I assume responsibility for all work done by either, myself, my agent, servant or employee.
BY AUTHORITY