262 NE 96 St (10)Issue Date: 10/20/2006
Owner's Name: PERRY ALEXANDER
Permit Type: Roof
Work Classification: Roof - Repair
Job Address: 262 96 Street NE
Miami Shores Village, FL
Contractor(s)
ARMORED METAL WORKS INC
Phone Primary Contractor
Yes
Additional Information
Type of Work: Re -Roof
Classification: Residential
Additional Info:
In consideration of the issuance to me of this permit, I agree to perform the work
covered hereunder in compliance with all ordinances and regulations pertaining
thereto and in strict conformity with the plans, drawings, statements or specifications
submitted to the proper authorities of Miami Shores Village. In accepting this permit I
assume responsibility for all work done by either myself, my agent, servants, or
employes. I understand that separate permits are required for ELECTRICAL,
PLUMBING, MECHANICAL, WINDOWS, DOORS, ROOFING and SWIMMING
POOL work.
OWNERS AFFIDAVIT: I certify that all the foregoing information is accurate and that
all work will be done in compliance with all applicable laws regulating construction
and zoning. Futhermore, I authorize the above -named contractor to do the work
stated.
Fees Due Amount
CCF $6.00
Education Surcharge $2.00
Permit Fee - Repairs $125.00
Scanning Fee $9.00
Technology Fee $3.13
Total: $145.13
Building Department File Copy
Applicant Signature
Miami Shores Village
10050 N.E. 2nd Avenue
Miami Shores, FL 33138 -0000
Phone: (305)795 -2204 Fax: (305)756 -8972
Permit
Expires: 04/18/2007
Invoice Number
R F -10 -06 -26482
Total:
Parcel #:
Block:
Section:
Permit Status: APPROVED
Permit Number: RF -10 -06 -2555
Amt Due
$145.13
Phone:
1132060133870
Lot:
PB:
Total Square Feet: 921
Total Valuation: $ 9,380.00
Re ' uired Ins • ections
Roof in Progress
Final Roof
Amt Paid
o'c'Y
1
NOTICE: In addition to the requirements of this permit, there may be
additional restrictions applicable to this property that may be found in the
public records of this county.
AND THERE MAY BE ADDITIONAL PERMITS REQUIRED FROM OTHER
GOVERNMENTAL ENTITIES SUCH AS WATER MANAGEMENT
DISTRICTS, STATE AGENCIES, OR FEDERAL AGENCIES.
Inspection Number' NSP- 31772
Permit Number: RF- 110 -06 -2555
Inspection Date: 11/07/2006
Inspector: Grande, Claudio
Owner: ALEXANDER, PERRY
Job Address: 262 96 Street NE
Project: <NONE>
Miami Shores Village, FL
Contractor: ARMORED METAL WORKS INC
Building Department Comments
Monday, November 6, 2006
Inspection Worksheet
Miami Shores Village
10050 N.E. 2nd Avenue Miami Shores, FL
Phone: (305)795 -2204 Fax: (305)756 -8972
Block:
Gid 0 8 200
Phone Number
Lot:
Permit Type: Roof
Inspection Type: Final
Work Classification: Roof - Repair
Parcel Number 1132060133870
Page 2 of 2
L
Passed
l �
�
Inspector Comments
Failed
Correction
Needed
Re- Inspection
Fee
($75)
No Additional Inspections can be scheduled
re- inspection fee is paid.
until
Inspection Number' NSP- 31772
Permit Number: RF- 110 -06 -2555
Inspection Date: 11/07/2006
Inspector: Grande, Claudio
Owner: ALEXANDER, PERRY
Job Address: 262 96 Street NE
Project: <NONE>
Miami Shores Village, FL
Contractor: ARMORED METAL WORKS INC
Building Department Comments
Monday, November 6, 2006
Inspection Worksheet
Miami Shores Village
10050 N.E. 2nd Avenue Miami Shores, FL
Phone: (305)795 -2204 Fax: (305)756 -8972
Block:
Gid 0 8 200
Phone Number
Lot:
Permit Type: Roof
Inspection Type: Final
Work Classification: Roof - Repair
Parcel Number 1132060133870
Page 2 of 2
NOT READY FOR FINAL.
SEAL ALL NAIL HEADS ON METAL BAR.
PICK UP ALL EXCESS MATERIALS.
11/02/06 CG.
Passed
Inspector Comments
()CO
Failed ,&7/1 1
Correction
Needed
Re- Inspection
Fee
($75)
No Additional Inspections can be scheduled
re- inspection fee is paid.
until
Inspection Date: 11/02/2006
Inspector: Grande, Claudio
Owner: ALEXANDER, PERRY
Job Address: 262 96 Street NE
Miami Shores Village, FL
Project: <NONE>
Contractor: ARMORED METAL WORKS INC
Building Department Comments
Thursday, November 2, 2006
Inspection Worksheet
Miami Shores Village
10050 N.E. 2nd Avenue Miami Shores, FL
Phone: (305)795 -2204 Fax: (305)756 -8972
NOV 0 6 2
Block:
Permit Type: Roof
Inspection Type: Final Roof
Work Classification: Roof - Repair
Phone Number
Parcel Number 1132060133870
Lot:
Page 1 of 2
Inspection Date: 1012006
Inspector: Grande, Claudio
Owner: ALEXANDER, PERRY
Job Address: 262 96 Street NE
Project: <NONE>
Miami Shores Village, FL
Contractor: ARMORED METAL WORKS INC
Building Department Comments
Monday, October 30, 2006
Inspection Worksheet
Miami Shores Village
10050 N.E. 2nd Avenue Miami Shores, FL
Phone: (305)795 -2204 Fax: (305)756 -8972
Inspection Number: INSP -31141
Permit Number: RF -10 -06 -2555
BY 0 2 2ica
Block:
Permit Type: Roof
Inspection Type: Roof in Progress
Work Classification: Roof - Repair
Phone Number
Parcel Number 1132060133870
Lot:
Page 1 of 2
Passed
Inspector Comments
Failed
Correction
Needed
Re- Inspection
Fee
($75)
No Additional Inspections can be scheduled
re- inspection fee is paid.
until
Inspection Date: 1012006
Inspector: Grande, Claudio
Owner: ALEXANDER, PERRY
Job Address: 262 96 Street NE
Project: <NONE>
Miami Shores Village, FL
Contractor: ARMORED METAL WORKS INC
Building Department Comments
Monday, October 30, 2006
Inspection Worksheet
Miami Shores Village
10050 N.E. 2nd Avenue Miami Shores, FL
Phone: (305)795 -2204 Fax: (305)756 -8972
Inspection Number: INSP -31141
Permit Number: RF -10 -06 -2555
BY 0 2 2ica
Block:
Permit Type: Roof
Inspection Type: Roof in Progress
Work Classification: Roof - Repair
Phone Number
Parcel Number 1132060133870
Lot:
Page 1 of 2
NOTICE OF COMMENCEMENT
A RECORDED COPY MUST BE POSTED ON THE JOB SITE AT TIME OF FIRST INSPECTION� n
PERMIT NO. __...__ -..-- -- .---- _- ._ - -_. _TAX FOLIO NO. �7 _C1
'a L - - 3
STATE OF FLORIDA:
COUNTY OF MIAMI -DADE
THE UNDERSIGNED hereby fives ratite that improvements will be made to certain real
property, and in accordance with chapter 713, Florida Statutes, the following information
is provided in this Notice of Commencement.
1. Legal description of property and street/address: N\ \Ce rtil l 5l\ i, reS S •ec 1 AIM$) P j b - 10
Lai 3 4-1_04s L( 4- 5 1i 1k a 1 0-c Ur >6 1 L-0.( Q.169
t c Lt. a� oiR� 5 ( )u 9 0(0 .003 L
2. Description of improvement: f•p - COO - C(rt+
3. Owners) name and address: Rc.cc'l kP'ckv1JCr 13E_ gc Z'annr SkoreS' `3313
Ir:erest in property:
Name and address of fee simple titleholder 131 P
4. Contractor's name and ddress: v\r\41c P. r c ' �' M $ \f Qt \at - — Fe(
c V - .,0y).J A\Q Co
5. Surety: (Payment bondirequired by owner frm contractor, if any)
Name and address: N
Amount of bond $
6. Lender's name and address: 1 l (N-
7. Persons within the state of Florida designated by Owner upon whom notices or other documents may be served as
provided by Section 713.13(1)(a)7.. Florida Statutes,
Name and address:
8. In addition to himself, Owners designates the following person(s) to receive a copy of the Lienor's Notice as provided
in Section 713.130;(b). Fiona Statute✓.
Name and address:
9. Expiration date of this Notice of Commencement: the expiration date is 1 year from the date of recording unless a
differ - i date is
Sig a f +caner
Sworn to and subscribed before me this 10 day of OC c-- , 20 Off.
-'.. Pr;r-I Ow' er's Name
Notary Public
:girt Notary's Name
My commission expires:
1:7. -4^ PAGE 4 lVO
A
'.TATE OF FLORIDA, COUNTY OF DADE
,ERTIF that this 1s a t,et: pC f the
, r.r d 12 tt"rf office on Z (11 day of
d Co( ty Courts
D.C.
1
C:f= N 2006R1117301
OR Bk 25014 Ps 0998; (1Ps)
RECORDED 10 /18/2006 11:23:50
HARVEY RUVINr CLERK OF COURT
MIAh1I --DADE COUNTY? FLORIDA
LAST PAGE
P r e p a r e , by \\\ (. c\1 1 ` kCk.A1 1—
ddress: tt Q O 3 pt r
'3'1°151
iD1251 Miami Shores Village
C)1) Building Department
10050 N.E.2nd Avenue, Miami Shores, Florida 33138
Tel: (305) 795.220 Fax: (305) 756.8972
BUILDING
9010 OG
PERMIT APPLICATION
FBC 2004
FOLIO / PARCEL #
Value of Work For this Permit $ q 38 to
Type of Work: ❑Addition ['Alteration
Bond $
Structural Review. $
Owner's Name (Fee Simple Titleholder) ee rr1 Alex° nde t�
Owner's Address a , a, Ng q 6 S-4i- ee - E"
City m'i r n't 5 \- ore S State FL r-. riq
Is Building Historically Designated YES NO V
Notary $ Training/Education Fee $
Scanning $ q Radon $ DPBR $
Code Enforcement $ Double Fee $
Permit No. -F
Master Permit No.
Permit Type (circle): Building Electrical Plumbing Mechanical
Phone #
Zip 33 1 3
Tenant/Lessee Name Phone #
Job Address (where the work is being done) a6 ca NE q, S4 -reel'
State Certificate or Registration No. Certificate of Competency No.
City Miami Shores Village County Miami -Dade Zip 3 3 3 $
Square / Linear Footage Of Work: q a
Total Fee Now Due $ ) 4 S. i S
oCT 1.1 °NM
BY: °--- - - - - --
Contractor's Company Name A r ('fl® re( Mp+a .1 L)nr I S ;Int Phone # ( 104- 7 a5-14100
Contractor's Address 1 1 4 l l- 1 S 1\ V e. r take +i r o .0 e
City Tar kScr1 V i Ile. State F Lo ri a s Zip 3 a a 1 Ga
305 -$1a. -6863
Qualifier Name \-ce >1 r1 p 4 P. 'b o r ap ( Phone #
Architect/Engineer's Name (if applicable) J\i/p, Phone #
['New Repair/Replace ❑ Demolition •
Describe Work: Tear (> 1 1S'i't -fla.+ roo- and_ replaces 94fr-1-r1
Submittal Fee $ Permit Fee $ `Z . 63 " CCF $ CO /CC
Technology Fee $ `
Zoning $
See Reverse side -
Bonding Company's Name (if applicable)
Bonding Company's Address
City State Zip
Mortgage Lender's Name (if applicable)
Mortgage Lender's Address
City State Zip
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING, SIGNS,
WELLS, POOLS, FURNACES, BOILERS, HEATERS, TANKS and AIR CONDITIONERS, ETC
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR
PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING,
CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF
COMMENCEMENT."
Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subject to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site
for the first inspection which occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the
inspection will not be approved and a reinspection fee will be charged.
Signature
Owner or Agent
The foregoing instrument was acknowledged before me this
day of ,20
who is personally known to me or who has produced
As identification and who did take an oath.
NOTARY PUBLIC:
Sign:
Print:
My Commission Expires:
****************************************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
APPLICATION APPROVED BY:
(Revised 02/08/06)
Signature
Contractor
The foregoing instrument was acknowledged before me this
day of , 20 _ , by
who is personally known to me or who has produced
as identification and who did t an oath.
NOTARY PUBLIC:
Sign:
Print:
My Commission Expires:
/0
*** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
Plans Examiner
Engineer
Zoning
i
BUILDING
PERM I T APPLICATION
FBC 2001
$Value of Work For this Permit * c', RO
Total Fee Now Due $
(Continued on opposite side)
Miami Shores V i l l. •. e
Building Department
10050 N.E.2nd Avenue; Miami Shores, Florida 33138
Tel: (305) 795.2204 Fax: (305) 756.8972
PermitType(cirde): Building Electrical Plumbing Mechanical Roofing
Owner's Name (Fee 9 mpl e Titl eholder) P.Q Cf\ At tyscockr Fhone # 305 S ?) a-CA' & 3
Owner's Address aco NP v((. t s+
City M ■c% ovCi SV a res State CL Zip 33 13 g
Tenant/Lessee Nane Phone #_
Job Address (where the work is being done) a(i •V., (9 SI -
City Miami ShoresVillarte County Miami -Dade Zip 3313
I s Building Historically Designated YES NO 1 7 -
Contractor's Company Name AC K1 C g€ b (t5 , \ ✓I c
Contractor'sAddreas 1 11 - 1 Sil�Qc�c1<� IF(
City c ackrks on V I le. Stele t.
Qualifier Ks✓V.t.“4 t-- P • NA rctef\
Fe
Permit No.
Master Permit No.
Architect /Engineer's Name (if applicable) !.)I Phone#
Phone# Ct0Lk- -N5 -Hi 91
Zip
Square Footage Of Work: L S(A
Type of Work: ❑Addition ❑Alteration [New Repel r/Repl ace ❑ Demolition ff
Descri be Wor k: 'Teo r P. X I ,v-1 n tRt Fin ri f and 1 `,P p (.a ( l i) ,r 1
AP LE) A 6 n(1 ror f,n Sy S`�-Q (�
9 -
Submittal Fee$ Permit Fee$ CCF $
Notary $ Training/Education Fee$ Technology Fee$
Scanning $ Radon $ Bond $
Code Enforcement $ Structural Plan RevieN. $
Bondi ng Company's Name (if applicable) @,i j p
Bondi ng Company's Address
City State Zip
M ortgage Lender's Name (if applicable) )1 (\-
Mortgage Lender' s Address
City State Zip
Application is hereby made to obtain a permit to do the work and installations as irxicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all Taws regulating
construdi on in this j uri slot on. I understand that a separate permit mist be secured for ELECTRICAL WORK, PLUMBING, SIGNS,
WELLS, POOLS, FURNACES, BOI LERS, HEATERS, TANKS and Al R CONDITIONERS, ETC
OWNER'SAFFI DAVIT: I certify that all the foregoing information isaocurateand that all work will bedonein compliance with all
applicable Taws regulating construction and ZC4i ng.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT I N YOUR
PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. I F YOU INTEND TO OBTAIN FINANCING,
CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF
COM M ENCEM ENT."
Notice to Applicant: As a concition to the issuance of a bii Icing permt with an esti rreted value exceeding $2500, the applicant rrust
promse i n good faith that a copy o f the notice o f oormrenoeine t and construction lien law brochure w i I I be delivered to the person
who property is subject to attachm art. Also, a certified copy of the recorded notice of corrrrEnoarurt mist be posted at the job site
for the first inspection which occurs seven (7) days after the hiking perrrit is issued. In the absence of such posted notice; the
i nspecti on wi I I not be approved and a rei nspedi on feewi II be charged.
Si gnature
cL
thc 10/14/03
pit
Sgnatrre f is �n►� =!I
Owner a Agent Contractor
The forego ng instrument was acknowledged before me this 10 The faregoi ng instrument was acknowledged before me this) 0
day of 0 Mu( 2006, by Pe cry 1kt' a v .e.r , day of 6'Tnb-tr , 20a by j .einn d t P. NorG
who is personally known to me or who has produced who is personally known to me or who has produced
iuuittow
As identifica l on and who d4 it
` asideitification and who did talcg1ififq
• ''�ssloti ' 41 .. /19TARY ' • : C �� G MAR / 7
NOTA : BLI C:
- a�GP 26 � 6 �• � . .P? ' ,∎ ION � �
g �. --- ..4.._ , fl = ' gn �0 °�� )
we.* :*'E p� nr J � : ' - c,�'
: a: c Pn - ' W a c �l� �tll T JUe — ��a ;
� ' -
Y p 1/ oc b `� � 9 �:�'� �n s�;` °:• o M Commis!' / a� o #
: DD39(w7 :
M Commission S9 On tX reS / U i 9 . . / Q q y (C�fftttetti Competency Holder) �ii,, L JC SiA�::
‘ 0�
o , m� ma0�`
State Certi fi cate or Registration Na Certificate of Competency No.
APPLICATION APPROVED BY: Plans Exam ner
Engi neer
Zoning
Oct 06 06 09:42a
1524.1 As it pertains to this section, it is the responsibility of the roofing contactor to provide the owner with the
required roofing permi and to explain to the owner the content of this section.. The provisions of Chapter 15 of
the Florida Building Code, Building govern the minimum requirements and standards of the industry for roofing
system installations. Additionally, the following items should be addressed as part of the agreement between the
own - and the contractor. The owners initial in the adjacent box indicates that the item has been explained.
1. Aesthetics -Wor
are for the purpose of pro 4114;
performance standards. A=��y
provisions. Aesthetic issues ?t
be addressed as part of the :
:ir Z Renadang Wo
in a • rdance with the
Code. (The roof deck is
3. Common Roofs. Co 1? ofs ose which have no visible delineation between neighboring
units (i.e. townhouses, condominiums, etc.). In buildings with common roofs, the roofing contactor and/or owner
sh . d notify the occupants of adjacent units of roofing work to be performed_
4. Exposed Ceilings: Exposed. wen beam ceifings are whee the underside of the roof decking can be
viewed from below. The owner may wish to maintain the arcntectu al appearance, therefore, roofing nail
penetrations of the underside of the decking may not be acceptable. The Florida Building Code provides the
opti • n of maintaining this appearances
r ,..,. 1 r` 7."" 1 --1
� J 1
Oct i1 ?006
5. Ponding Water. The current roof system and/or deck of the building may not drain well and may
cause water to pond (accumulate) in low -lying areas of the roof. Ponding can be an Indication of structural
distress and may require the review of a professional structural engineer. Pondrng may shorten .the. life
expectancy and performance of the new roofing system. Ponding conditions may not be e+Sdeaf unta the original
TO g system is removed. Ponding conditions should be corrected. • ••••
. •••• �
6. Overflow scuppers (wall outlets): It is required that rainwater flow off so' titer the roof iS not
ov - • aded from a build up of water. Perimeter/edge walls or other roof extensions may gittk•ttnis dr iyle if
overflow scuppers (well outlets) are not provided. It may be necessary to Install overflow scuppers in accordance
e Florida Building Code, Plumbing
• •
•• ••
7. Ventilation: Most roof structures should have some ability 10 vent natural ai:rfow.tly the interior of
the ructural assembly (the building itself). The existing amount of attic ventilation shall not be r Ittnay be
beneficial to consider additional venting which can result in extending the service life of the rpot' . • ••••
•
Owner' '1 en s Signature
t' S+.
Property Address
M
Rev: 1/20/2005, Computer Services. building Department
Col (0 / o,c)
Date Contractors Signature
Permit Number
772 - 225 -5779 p.4
ck)- 2050
SECTt•N9 "
F(URR1CANE ' ONES REQUIRED OWNERS NOTIFICATION FOR ROOFING
CONSIDERATIONS
The workmanship provisions of Chapter 15 (High Velocity Hurricane Zone)
system meets the wind resistance and water intrusion
ues are not a consideraf:on with respect to workmanship
appearance, that are not part of a zoning code, should
e owner and the contactor.
groofing the existing wood roof deck may have to be renailed
r 16 (High Velocity Hurricane Zones) of the Florida Building
moving the existing roof system).
•
.. •
.•..
• •
•• •
Roof System
Required Sections of the
Permit Application Form
Attachments Required
Sea List Below
Low Slope Application
A, B, C
1,2.3,4.5.6,7
Prescriptive BUR RAS 150
1 A, B.0
4.5,6.7
Asphaltic Shingles
A, B, D
1,2,4.5,6,7
Concrete or Clay Tile
A, 8, D, E
1,2,3,4,5,6,7
Metal Roofs
A, B, D
1,2.3,4,5,6,7
Wood Shingles and Shakes
A, B, D
1 ,2,4,5,6,7
Other
As Applicable
1,2,3,4,5,6,7 I
High Velocity Hurricane Zone Uniform Roofing Permit Application Form
MIAMI -DADE COUNTY BUILDING DEPARTMENT ELECTRONIC APPLICATION I
INSTRUCTION PAGE
COMPLETE THE NECESSARY SECTIONS OF THE UNIFORM ROOFING PERMIT
APPLICATION FORM AND ATTACH THE REQUIRED DOCUMENTS AS NOTED BELOW.
ATTACHMENTS REQUIRED
1. Fire Directory Listing Page
2. From the Miami -Dade County Notice of Acceptance
NOA Cover Sheet
NOA Specific System Description
NOA Specific System Limitations
NOA General Limitations
I- Applicable Detail Drawings
3. Design Calculations per Chapter 16, or if applicable, RAS 127 or RAS 128
4. Other Component Notice of Acceptances
5. Municipal Permit Application
6. Owners Notification for Roofing Considerations (Appendix " F" Form) Re- roofing or
Repairs Only
7. Any Required Roof Testing /Calculation Documentation
Any other additional data reasonably required by the Building Official
to determine the integrity of the roofing system.
Page 1
• • •
• • •
• •
.. .. •
....
.... •
• • • •
• . • • ... •
• • •
..
•
• •
• •
• • . • • •
• •
• • .... •
• • •
.. •
... •
•
. •
.. •
rate ► of
file: / /C:\ Documents% 20and %20Settings \jshycko\Desktop \Jaime\ bldg \roof ng_permiting\in... 5 /13/2003
• •
•
•
•
1
High Velocity Hurricane Zone Uniform Roofing Permit Application Form 11
MIAMI -DADE COUNTY BUILDING DEPARTMENT ELECTRONIC APPLICATION
Master Permit No.
Contractor's Name:
r fi13o 'i'CI�I
Low Slope
L Asphaltic Shingles
I Prescriptive BUR -RAS 150
Lo v slope roof area (ft!
q ' a 1
Section A (General Information)
Process No.
I Mechanically Fastened Tile
Li Metal Panel /Shingles
Other:
.ep Sloped area (ft')
Page 2
Job Address:
:)-
Roof Category
Roof Type
New Roof Re- Roofing L1] Recovering ! j Repair I,' Maintenance
Are there Gas Vent Stacks located on the roof? j _! Yes )4 No If yes, what type? I Natural
Roof System Information
L_i Mortar /Adhesive Set Tile
Wood Shingles /Shakes
Total (ft.') q - - 1
I przx
Section B (Roof Plan)
(Sketch Roof Plan: Illustrate all levels and sections, roof drains. scuppers, overflow scuppers and overflow drains. Include dimensions II
f of sections and ieveis. cieariy identify dimensions of elevated pressure zones and location of parapets.
0..11LOALIL.9]
(Perimeter Width (a'): Corner Size (a' x a'):
• •
•�... •y � ... • • •.• • • .
1 }__ __, •
••••
s U.5.,4 1 %..) 1. 1
•
•
http : / /www.miamidade.gov/building/ roofing_ _permiting /permit_app_section_ a.HTML 6/29/2006
•
•
•
• •
•
• •
• •
High Velocity Hurricane Zone Uniform Roofing Permit Application Form
MIAMI COUNTY BUILDING DEPARTMENT ELECTRONIC APPLICATION
Illustrate Components Noted and Details as Applicable:
Woodblocking, Gutter, Edge Terminations /Stripping /Flashing, Continuous Cleat, Cant Strip. Base
Flashing,Counterflashing, Coping, Etc.
Indicate: Mean Roof Height, Parapet Height, Height of Base Flashing, Component Material, Material
Thickness, Fastener Type, Fastener Spacing
Or: Submit Manufacturers Details that Comply with RAS -111 and Chapter 16.
• I
Page 3a
axb, ?et all H erght.
il art Roe.e i lt- . 15 Ft
• • •
• • • •
.. • .... •
•
....
....
• •
.. • • •
• • •
•
• •
•
• •
-H-
. •
•
• •
•
• • ••••
• • .... • •
• • •
.. • •••• •
• • •
.. •
7411 -1 Silverlake Terrace
Jacksonville, FL 32216
March 30, 2006
To Whom It May Concern:
the metal roof professional
rm etal L F orks, Inc.
State Certified Contractor Lic. # CCC1325763
metalroofpro.com
Ph: 904 - 725 -4197 Fax:904- 725.4139 ken @metalroofpro.com
This is how we propose to provide enhanced fastening of the base sheet in the perimeter area of the
flat roof.
We propose to nail 4 inch on center in each direction within 4 feet of edges of roof.
Respectfully,
Ken Durden,
Owner
• • .
• • •
•
•• • •••. •
• • •
••. •
•
• • •
•••• • • • •
•••• •
• •
•• •• •
• • •
• •
•
• •
•
• •
• • ••••
• •
• •• • •
•
• • •
•• • •• • •
• • •
Oct 16 06 03:52p
•'Jct. lb. Mc 1:1bY1 PULYULASJ U6A - ilat1elcn, FP,
•
MIA M 1DADE
BUILDING CODE COMPLIANCE OFFICE (BCCO)
PRODUCT CONTROL DIVISION
NOTICE OF ACCEPTANCE (NOA)
Polyglass USA, Inc.
150 Lyon Drive
Fernley, NV 89408
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction
materials. The documentation submitted has been reviewed by the BCCO and accepted by the Building
Code and Product Review Committee to be used in Miami Dade County and other areas where allowed
by the Authority Having Jurisdiction (A.H,1).
This NOA shall not be valid after the expiration date stated below. The BCCO (In Miami Dade
County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this product
or material tested for quality assurance purposes. if this product or material fails to perform in the
accepted manner, the manufacturer will incur the expense of such testing and the AHJ may
immediately revoke, modify, or suspend the use of such product or material within their jurisdiction.
BCCO reserves the right to revoke this acceptance, if it is determined by BCCO that this product or
material fails to meet the requirements of the applicable building cods.
This product is approved as described herein, and has been designed to comply with the Florida
Building Code, including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Polyglass Modified Bitumen Roofing 5�st Over Wood Decks
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state
and following statement: "Miami -Dade County Product Control Approved ", unless otherwise noted
herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has
been no change in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or
change in the materials, use, and/or reannfacture of the product or process. Misuse of this NOA as an
endorsement of any product, for sales, advertising or any other purposes shall automatically terminate
this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal
of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and
followed by the expiration date may be displayed in advertising literature.. If any portion of the NOA is
displayed, then it shall be done iQ its entirety,
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Official.
• • • • • • • • • • • •
This NOA revises NOA # 03-09;5_05 a icl ;onsis.s if hics:J through 44.
The submitted documenta way r v ewed br Jere t. Aceebo_
• • •
• • • • •
• • • • • •
•• • • • ••
• • • •
•• • ••
••• •
• •
• •
• • •
• •• •
• • •
• •
•••
• •
• •
• •
• •
• •
• •
• • • •
•• • •
•
•
•
•
•
•
• •
• ••
•
772 -225 -5779 p.6
No. yd!? .
OCT 1 6 7006
BY:Ykt
MI/MI -DADE COUNTY, FLORIDA
��O -DADE FLAGLER BUILDING
Fr.AGLER STREET, SUITE: 1603
MIAMI, FLORIDA 33130 -1563
(305)t3 5-2901 FAX (305) 375 -2906
• / NOA No.: 06- 0410.06
Expiration Date: 09/13/11
Approval Date: 09/14/06
Page 1 of 44
Oct 16 06 03:52p
. Uct. :b. [UUb 1:Ib■J141
ROOFING ASSEMBLY APPROVAL
Category.
Sub - Category
Deck Tvpe:
Maximum Design Pressure
Fire Classification:
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT:
TABLE 1
Product
?olyflex
Polyflex G
PolyOex G FR
Polybond
Polybond G
E1astoi1ex S6
Elastofex S6 G
Elastoflex S6 G FR
Elastashield TS4
Fl9stoshicld TS4 FR
l'UlYl2lAJJ U5? - hazletcn, uA
Dimensions
32' 10" x 3' 3 -3/8"
Roofing
SBS /APP Modified Bitumen
Wood
-82.5 psf
See General Lin=itatio t #1
• •
Test
Specification
32' 10" x 3' 3 -3/8" ASTM D 6222 Torch applied, polyester reinforced, APP modified
bitumen membrane with a burn off polyethylene
back face and a granule top surface_
32' I0" x 3' 3 -3/8" ASTM D 6222 Torch applied, polyester reinforced, APP modified
bitumen membrane with a buffo off polyethylene
back face and a granule top surface and `ue retardant
chemistry.
32' 10" x 3' 3 -3/8" ASTM D 6222 'Torch applied, polyester reinforced, APP modified
bitumen menobrano with a burn off polyethylene
back face and a smooth or sanded top surface.
Torch applied, polyester reinforced, APP modified
bitumen membrane with a burn off polyethylene
back face and a granule top surface.
Torch, hot asphalt or cold adhesive applied, polyesoer
reinforced, SBS modified bitumen membrane with a
burn off polyethylene or sanded back fact and a
polyethylene or sanded top surface.
Torch, hot asphalt or cold adhesive applied, polyester
reinforced, SBS modified bitumen membrane with a
burn ofl'palyethylere or sanded back face and a
granule top surface.
Torch, hot asphalt or cold adhesive applied, polyester
reinforced, SBS modified bitumen membrane. with a
burn off polyethylene or sanded n
ded back face d a
granule top surface and fire retardant chemistry.
32' 10" x 3' 3 -318" ASTM D 6164 Torch, hot asphalt or cold adhesive applied, polyester
reinforced, SBS modified bitumen membrane with a burn off polyethylene or =tied back face and a
granule top surface.
32' 10" x 3' 3 -3/8" ASTM D 6154 Torch, hot asphalt or cold adhesive applied, polyester
- • • ° • • ° • raufalved, SBS modified bitumen membrane with
• • • • • • • gregffpolycthylene or sanded back face and a
• • ° • • ° . gjan surface and fire retardant chemistry.
32' 10" x 3' 3 -3/8" ASTM D 6222
32' 10 "x3' 3 -3/8' ASTM D6164
32' 10" x 3' 3 -3/8" ASTM D 6164
32' 10" x 3' 3 -3/8" ASTM D 6164
ASTM D 6222 Torch applied, polyester reinforced, APP modified
bitumen membrane with a burn off polyethylene
back fact and a smooth or sanded top surface.
• • • • • • •
• • • • • • • • -
• • • • • • • • •
•• • • • •• • • • •
• • • • •• • •
•- • •• • •
• • • • • ••• •
• • • • •
• ••• • •
• • • • • • •
• •• • • • •• •
• • • • ••• •
772 -225 -5779
No. 'nib -. J
Product
Description
NOA No.: 06- 0410,06
Expiration Date: 09/13/11
Approval Date: 09/14/06
Page 2of4l
p.7
Oct 16 06 03:53p
'Oct. 1'6, 2006 1 :16 l'ULYGLAS'S L' A — Hazleton, VA
Product
Elastoflex V
Elastoflex VG
Elastoflex VG FR
Xnaflex
XtreEcx G
Xtraflcx G FR
E]astoflex SA P FR
Elastoflex SA V FR
Base
Elastoflex SA V FR 32' 6" x 3' 3 -318'
(Elastoflex SA V ) 32' 6" x 3' 3 } le"
Elastc f ex SA V G
Elastoflea SA V G
FR
Elastoflex SA P
Eiastobase
Polyiex SA
Polyflex SAP G FR
Dimensions
32' 10" x 3' 3 -319" ASTM D 6163
32' 10" x 3' 3 -318" ASTM D 6163
32' 10"x3'3 -318" ASTMD6I63
32' 10" x 3' 6"
32'
32' ler x 3' 6"
32' 6" x 3' 3 -308"
32' 6" x 3' 3 -318"
32' 6" x 3' 3 -318"
32' 6"x 3' 3 -318"
32' 6" x 3' 3-3/8"
65' 2" x 3' 3-3/8"
Test
Specification
ASTM D 6222
ASTM D 6222
ASTM D 6222
ASTM D 6164
ASTM D 6/63
ASTM D 6163
ASTM D 6163
ASTM D6163
ASTM D 6163
ASTM D 6164
ASTM D 4601
32' 6 "x3'3)1" • ASTMD6222
• •
. • v .' : :: :.3nd'agranule top surface.
32' 6" x 3' Stir" .. :A.= J tP24 Self pdh red, polyester reinforced, APP modified
bitumen membrane with a self-adhering back face
and a granule top surface.
• • • ... • ...
• • • • • • 0 • • •
• • • • • • 0 • • •
• • • • 0 .. 0 • • • •
• • • • . • • • • •
•. • .. 0 • •
.. • • • • 0 •.. •
• • • • 0 • •
• • • •.0 • •
• • 0 • • 0 • • •
• .. .. • 0 • •. •
... • • • ... •
772 -225 -5779
No. 9 /5
Product
Deseription
Torch, hot asphalt or cold adhesive applied,
fiberglass reinforced, SBS modified bitumen
membrane with a burn off polyethylene or sanded
beck face and a sanded top surface.
Torch, hot asphalt or cold adhesive applied,
fiberglass reinforced, SBS modified bitumen
membrane with a burn off polyethylene or sanded
back face and a granule top surface.
Torch, hot asphalt or cold adhesive applied,
fiberglass reinforced, SBS modified bitumett
membrane with a burn off polyethylene or sanded
back Lace and a granule top surface and fire retardant
chemistry.
Torch applied, polyester reinforced, TPO modified
bitumen n'tembrane with a burn off polyethylene
back face and a smooth top surface. •
Torch applied, polyester reinforced, TPO modified
bitumen membrane with a burn off polyethylene
back face and a granule top surface.
Torch applied, polyester reinforced, TPO modified
bitumen membrane with a burn off polyethylene
back face and a grannie top surface and fire retaztlant
chemistry.
Self-adhered, polyester reinforced, SBS modified
bitwnen membrane with a self - adhering back face
and a granule top surface.
Self- adhered, fiberglass reinforced, SBS mcdi6ed
bitumen membrane with a self - adhering back face
and a smooth top surface.
Self- adhered, fiberglass reinforced, SBS modified
bitumen membrane with a self adhering back face
and a granule top surface.
Self-adhered, fiberglass reinforced, SBS modified
bitumen membrane with a self - adhering back face
and a smooth top surface.
Self- adhered, fiberglass reinforced, SBS modified
bitumen membrane with a self - adhering back face
and a granule top surface.
Self - adhered, fiberglass reinforced, SBS modified
bitumen membrane with a self-adhering back face
and a granule top surface.
Self - adhered, fiberglass reirtfort:ed, SBS modified
bitumen membrane with a self - adhering back face
and a granule top surface.
SBS modified asphalt coated fiberglass reinforced
base sheet
Self - adhered, polyester reinforced, APP modified
ilea n membrane with a self- adhering back face
NOA No.: 064410.06
Expira don. Date: 09113 (11
Approval Date: 09114(06
Page 3 of 44
p.8
H 4
Oct 16 06 03:53p
Uct. lb. 1Ui }b 1:Ib M
APPROVED INSULATIONS:
Product Name
Polythcrm Al
Polytherm Composite
PYROX, White Line
ACFoam 11
High Density Wood Fiberboard
Perlite/Urethane Composite
Perlite Insulation
Type X Gypsum
Dens Deck
E RGY -2
Fesco Board
Multi -Max & FA
h 'ULYLiLf S USA - Hd7. I e ton, i'A
TABLE 2
Product Description
Polyisocyanurate foam insulation
Polyisocyanurate/perlite composite
insulation.
Polyisocyanurate foam insulation
Polyisocyanurate foam insulation
Wood fiber insulation board
Perlite 1 urethane composite board
insulation
Perlite insulation board
Fire resistant rated gypsum.
Water resistant gypsum board
Polyisocyanurate foam insulation.
Rigid perlite roof insulation hoard-
Polyisocyanurate roof insulation
• • 100 • • • • • • •
•
• o •
• •o • • • • ••• •
• • 000 • • • • • • •
• • • •o•
• • • • • • •
• • • • • • •
• • • • • • • 0
• • • • • •
•• • •• •
••• • • • • •
• • • • 0
• • • •••
•
• •• •• • •
••• • • • •
• •
• • •
• • •
• • • •
• • ••
• •
• • •
• •
• •
• • •
•• ••
772 -225 -5779 p.9
lo. 9dh Y.
Manufacturer
(With Current NOA)
Polyglass USA, lac.
Polyglass USA, Inc.
Apache Products Co.
Atlas Energy Products
Genetic
Generic
Generic
Generic
G -P Gypsum Corp.
Johns Manville
Johns Manville
RMax, Lic.
NOA No.: 06- D410.06
Expiration Date: 09/13.'11
Approval Date: 09/14/06
Page 4 of 44
Oct 16 06 03:54p
'Oct. 16. 2C)6 1:17FM
APPROVED FASTENERS:
Fastener Product
Number ber Name
Dekfast Fasteners #12,
#14 & #I5
2. Dekfast Hex Plate
3. Dekfast Lock Plate
4. #12 8t. #14 Roofgrip
5. Metal Plate
6. Plastic Plate
7. Insul -Fixx HD Fastener
B. Insu1 -Fixx S
9. Insul -Fixx P
10. Tru -Fast HD
11. Tru -Fast Plates
12_ Tru -Fast Plates
EVIDENCE S11I16MITT D:
Test A>;encv/Identiher
Factory Mutual Research Corp.
Exterior Research & Design, LLC
Underwriters Laboratories, Inc
POLY(iLA5 USA — Haz I eton, PA
•
• • 000 • •
• • • • • •
• • • • • •
•• • • • ••
• • • •
.• • ••
• • • • • • •
• • • •
• • •••
•• •• • •
• • • • • •
TABLE 3
Product
Description
Insulation fastener for
wood, steel and concrete
decks
Galvalune hex stress plate.
Polypropylene locking
plate.
Insulation and membrane
fastener
Galvalume AZ50 stress
plate
Polyethylene stress plate
Insulation fastener for steel
and wood decks
Galvalume AZ55 stress
plate
Polyethylene stress plate
Insulation fastener for steel
and wood pecks
Galvalucae AZ55 steel plate
Polyethylene plastic plate
Name
J.L 3001334
F.]. 3000857
I.I. 3004091
#11757.12.00 -1
411757.04.01 -1
# 1 1751.05.03
41 1758.08.03
00NK20869
•
••
• . • •
• •• • • ••• •
•
•• ••• •• 0 • • ••
• • • • • • • • •
• • •
• • •
• • • •
• • • ••
• •
• •
•
•
• •
•• •
• •
772 - 225 -5779
No. 9b15
Manufacturer
Dimensions With Current NOA)
2 / x
3 '4 "
3" x 3 `/4"
Various
3" square
3.2" round
Various
3" round
3" round
3" round
3" round
Construction Fasteners
Inc.
Construction Fasteners
Inc.
Construction Fasteners
Inc.
ITW Buildex
ITw Buildex
ITw Buildex
SFS Stadler, Inc
SFS Stadler, Inc.
SFS Stadler, Inc.
The Tru -Fast Corp
The Tru -Fast Corp.
The Tru -Fast Corp.
Report Date
FMRC 4470 02.15.00
01.12.00
01.12.00
12.07.00
04.25.01
05.30.03
08.11.03
UL 790 06.08.00
NOA No.: 06- 0410.06
Expiradon Date: D9113/11
Approval Date: D9/14/06
Page S of 44
p.10
.
Oct 16 06 03:54p
Deck Type 1:
Deck Description:
System Type E(1):
Fastening 1:
Fastening 42:
Wood, Non - Insulated
j0� ;
, or greater plywood or wood plank.
Base sheet is mechanicaily attached to roof deck.
All General and System Limitations apply.
Base Sheet: One ply of ASTM .D 2626 roofing felt fastened to the deck as described below:
sheet using 11 ga. annular ring shark and 1 -5/8" diarnetersin -eaps
spaced 4" o.c. in a m and 4" • • a y spa staggered rows in
the center -
-r eels -45 psf, See General Limitation #9)
Attach base sheet using Simplex Mega Cap -Nails spaced 6" o.c. in a min. 2" lap
and 9" o.c. in two equally spaced staggered rows in the center of the sheet.
(fleets --45 psf, See General Limitation #9)
Ply Shcct: (Optional) One ply of Elastoflex SA -V self-adhered.
MetnPrane: One ply of Polyllex SA P FR, Polyflex SA P. Flastoflex SA P, F:Iastolle. SA -P FR
or Elastoflex SA -V FR self - adhered.
Surfacing: (Optional) Install one of the following to obtain required fire classification.
1. Gravel or slag at 400 ibs /sq or 300 lbs /sq, respectively, in a flood coat of
approved asphalt at 60 ]bs /sq.
2. Karnak 97 Fihrated .. luminum Asphalt Roof Coating or Asbestos Free
.Aluminum Roof Coating at I ! : galisq.
3. Kokem Products Sunguard Acrylic Roof Coating at ] gal/sq.
4. Monsey Endure Aluminum Roof Coating, Weather Check or Pro -Grade
Aluminum Roof Coating at 1V-1 gal/sq.
5. Grundy al MB Aluminum Roof Coating at 1 -2 gal/sq.
6. Fields F350 Heat Shield Aluminum Coating or F630 Pleat Shield Fibered
Aluminum Coating at 1' /z gal/sq.
Maximum Design
Pressure: See fastening options above.
• • .. • • • • • • • •
•
• 0 •
• • o • • • • • • • •
• 0•• • • • • •
•• ••• •• 0 • • ••
• • • oo• • • ••
• • • • • • • • • •
• • • • • • 0 • • •
•• • • • •• 0 • • • •
• • • • • • • • ••
.• • •• • • •
• • • • • • • • • • • •
• • • • • • • •
• • • • • • • • •
• • • • • • • • • •
• • • • • • • • • • • •
0 •• • • 0 0 •• • •
772 -225 -5779 p.11
\ OA No.: 06- 0410.06
Expiration Date: 09/1311 1
Approval Date: 09/14;06
Page 37 of 44
Oct 16 06 03:54p
Uct.'1b. 2U06 1 : 34'N NOLYi! A USA - Haz I etcr, VA
Deck Type 1: Wood, Non - Insulated
Deck Description: 19 /3Z" or greater plywood or wood plank.
System Type E(2): Rase sheet is mechanically attached to roof deck.
All General and System Limitations apply.
Base Sbect: Two plies of ASTM D 2626 roofing felt fastened to the deck as described below:
Fa stening:
Ply Sheet:
Membrane:
Surfacing:
772 -225 -5779 p.12
No. 911/5 9
Attach base sheet using 11 ga. annular ring shAn1- atd 1 -5/8" diameter tin caps
spaced 9" o.e. in a min. 2" lap and 9" o.c. in two equally spaced staggered rows in
the center of the sheet.
(Optional) One ply of Elastoflex SA -V self- adhered.
One ply of Polyflex SA P FR, Polyflex SAP, Elastoflex SA P, Elastoflex SA -P FR
or Elastoflex SA -V FR self- adhered,
{Optional) Install one of the following to obtain required fire classification.
1. Gravel or slag at 400 lbs/sq or 300 lbs/sq, respectively, in a flood coat of
approved asphalt at 60 lbs /sq.
2. Karnak 97 Fibrated Aluminum Asphalt Roof Coating or Asbestos Free
Aluminum Roof Coating at 1% gal/sq.
3. Kokem Products Sunguard Acrylic Roof Coating at 1 gal/sq.
4. Monsey Endure Aluminum Roof Coating, Weather Check or Pro -Grade
Aluminum Roof Coating at 1!: gal/sq.
S. Grundy al N,iB Aluminum Roof Coating at 1 -2 gal/sq.
6. Fields F350 Heat Shield Aluminum Coating orF630 Heat Shield Fibered
Aluminum Coating at I''A gal/sq.
Maximum Design
Pressure: -45 psf (See General Limitation #9)
•• ••• • • • • • ••
• • • • o • • • •
• • •
• • • •
•
•• ••• •• • • • •
• • • • o• • •••
• • • • • • • • • •
• • • • ' • • • • • •
•• • • • •o 0 • • • •
• • • • • • • • • •
•• • •• 0 • •
••• • • • • ••• • •
• • • • • • • •
• • • ••• • • •
• • • • • • • • • •
• • • • • • • • • •
0 •• • • • 0 •• • •
Nan No.: 06- 0410.06
Expiration Date; 09/1.3/11
Approval Date: 09/14/06
Page 38 of 44