895 NE 95 St (9)PERMIT NO.
STATE OF FLORIDA:
COUNTY OF DAOE:
T riE UNDERSIGNED hereby gibes notice that improvements will be made to certain real property. and in accordance with
Chapter 713. Florida Statutes. the following information is provided in this Notice of Commen ement.
1. Legal description of property and street address:
e
2. Oesciption of improvemerre: ' �� " AP 4 � • 4 774
3. Owner(s) name and address:
Interest in property:
A. Contractor's name and addr
Name and address:
Amount of bond 5
6. Lender's name and address:
- vly Commission Expires: ,
=-'rint Notary's Name
Notary Public ..
NOTICE OF COMMENCEMENT
TAX PCLIO NO.
5. Surety:(Payment bond required by owner from contractor, if any)
7. Persons within the State of Florida designated by
by Section 713.13(1)(a)7.. Florida Statutes.
Name and address:
, .� � _41A ;
Name and address of fee simple titleholder:
8. In addition to himself. Owner designates the following person(s) to receive a copy of the Lienor's Notice as provided in
Section 713.13(11(b), Florida Statutes.
Name and address:
9. expiration date of Notice of Commencement: (the expiration date is 1 year from the date of recording unless a
different date is specified)
Signature of Oc nor
Print Owners Name _
Sworn to and subscibed before me this % day of •1 . 19 96
l rilift'+ • °OFFICIAL SEAL°
se— i Sharn►un MiNeP
t+ �; �; My Commission Expires 117
4, ci•�:mission nit., 327872
y � B oa h•,„.•
•
mn
DADE
t s r:,:, u v hue i• y tho
9.5R393 18 1 1995 SEP 27 1045
whom n =ti . _ or other dor..tments may be se
• r•
as provided
Monier Roof Tile _
1900 Northwest 21st Avenue
Fort Lauderdale, FL 33 I 1 1
Your application for Product Approval of monicutoor Tik £dtir1rLUILA1lliesive Scl Conerc1e "IJcrinutil Flat"
JZo41iW_ • l'i1. under Chapter 8 of the Metropolitan Dade County Code governing the use of Alternate Materials and
"Types of Construction, and completely described in the plans, specifications and calculations as submitted by
1tedland 'Technologies, The Center for Applied Engineering, Inc. and Professional Service Industries, Inc. has
been recommended for acceptance by the Building Code Compliance Department to be used in Dade County,
Florida under the specific and standard conditions set forth herein.
The approval shall be valid for n period of Three years. The Building Code Compliance Departinenl reserves the
right to secure a product or material at any time for a or manufacturer plant for quality control le_�ing. If
product 01 material fail to perform in the approved manner, the Codc Compliance Dcpatintent may revoke, modify
or suspend the use of such product or material immediately. The Building Codc Compliance Department reserves
the right to require testing of this product or material should any amendments to the South Florida Building Codc be
enacted affecting this product or material.
The expense of such testing will be incurred by the Manufacturer.
PPODUCT NO. :
ACCEPTANCE NO.: 11.:1221.08
EXPIRES:
APPROVED:
BUILDING CODE COMPLIANCE IJ i'ADTMENT
SUITE 1003
MEMO-DADE FLAIL :ctl OUILDINU
140 WEST FLAOL!R STREET
MIAMI, FLORIDA 99100.1500
(30) 975.2801
PRO CONTROL NOTICE , OIL ACCEPTANCE rAX p05 376 -2900
•
DEC 2 7 1997
METnOI'OLITA14 DADE COUNTY, FLORIDA
METnO•DADE I'LAGLEI BUILDING.
Itnul Rodriguez
Product Control Division
Supervisor
- PLEASE NOTE -
TI IS TIIE COVERSIIEET. SEE ADDITIONAL PAGES FOR SPECIFIC AND GENERAL
CONDITIONS.
BUILDING CODE COMMITTEE
This application for Product Approval has been reviewed by the Metropolitan Dade County Building Codc
Compliance Department and approved by the Building Code Committee to be used in Dade County, florida.undcr
the conditions set forth above.
DEC 2 1 1994
Charlca ;panger, 1'.E., Direct
Building Compliance Department
Metropolitan Dade County
Applicant:
Monier Roof Tile
1900 Northwest 2I st Avenue
Fort Lauderdale, FL 331 1 1
Ca ts gory: Prepared Roofing
,Sub - Category: Tile
Iyp : Mortar Set/Adhesive Set
Sub -Type: Concrete
PRODUCT' CONTROL NOTICE OF ACCEPTANCE
ROOFING SYSTEM APPROVAL
Sy5fem Description
Monier Itoof Tile is a member of the Rcdland Group, a world wide producer of primary building
products and roof tile. Monier manufacturers concrete roof tile for nail -on, mortar set or adhesive set
applications in plants throughout the United States ranging from Washington State to Florida. All tile is
manufactured from extruded concrete consisting of Portland Cement, plasticizer, iron and m:'allic
oxides, and blended aggregates. This ProdufLCotllroi \pproY_aLrelatesJo IMIQnier's 1 /13eriatula..EL i "_li1S:
prslil4. Rsfst:..to ;tppop.riat.Q1tottucilsaltfilL AppCQYa1 lbuthcLiik.pLlllss..
Monier sells tile systems through local distribution and directly to consumers. All profiles :►ride
matching trim pieces' used for rake hip, ridge hip, and valley terminations. Tile system accessoric!: ouch
as undcrlayn►ent, ventilation systems and flashing systems are also available. These accessori:'..; are
manufactured for all profiles and form a part of this Product Control Approval.
Monier's "Bermuda Flat" roof tilt has been tested in compliance with the South Flo! ida I_ t: i':c;i ►g
Code requirements for concrete, mortar or adhesive set tile applications. The minimum roof slope for
Monier's "Bermuda Flat" mortar or adhesive set tiles shall be 2 ":12 ". See the "Profile Drawing" :action
in this approval for the "Bermuda Flat" profile drawing. The Moni! :r "13errnuda Flat" tilt pro!';: ha::
been tested for both wind characteristics and static uplift performs :t: ; therefore, any consideratio:t for
installation shall be done as a 'Moment (lased System'. Data for attachment calculations is v... in
"fables I through 3 of this approval.
Contact:
Reese 1 Moody
Technical Service Accessories Manager
1900 N \V. 21st Avenue
Ft. Lauderdale, FL, 33311
(800) 432 -2715
Product Control No.: 94 - 1221 08
Approval Date: EEC 27 1 J 94 •
Expiration Date: 7 1‘,P.
Raul ltodrir,ucz
•
A',
• TRADE NAMES OF PRODUCTS MANUFACTURED OR
LABELED BYAPPLICANT
'I'cst Product
Prod (La Dltuens(p? SItccifi aliq,n Description
Bermuda fiat Mat I = 15" PA 112 flat, interlocking, extruded concrete
Tile w = l0' / roof tile equipped with two nails holes.
I'' 'A" thick For mortar set or adhesive set
applications.
Trim Pieces
1 s varies
w = varies
varying thickness
PA 112
2
Raul Rodriguez
Product Control No.: 91- 1221.08
Accessory trim, concrete roof piec. s
for use at hips, rakes, ridges and valley
terminations. Manufactured for each
tile profile.
1'stulttsl
/130 Felt
/143 Coaled I3ase
Sheet
Mineral Surface Cap
Sheet
Rainproof!!
Ice and Water Shield
Mopping Asphalt
Flashing Cement
TRADE NAMES or PRODUCTS MANUrACI URED OTHERS
1?jt)tcrtsionl
N/A
N/A
N/A
Lenzingtcx -7-13 140 59" x 164' roll
Underlayment 22 Ibs /roll
30" x 75' roll
36" x 75' roll
or
60" x 75' roll
36" x 75' roll
N/A
N/A
Test
Spssifteall tts
ASTM D 226
type 11
ASTM D 2626
ASTM D 249
PA 104
PA 104
PA 103
ASTM D 312
type 111 or IV
ASTM D 4586
Product Control No.: 04- 1221.08
Product
Description
Saturated organic felt
to be used as a nailed
anchor sheet.
Saturated and coated
organic base sheet for
single or double ply
underlayment.
Mineral surfaced
asphalt roll roofing
for use as a top ply in
a double ply
underlayment system.
Single ply, nail -on
underlayment.
Single ply, nail -on
underlayment with 2"
self - adhering top
edge.
Self- ndhering
underlayment for use
as a top ply in a two
ply underlayment
system with approved
/130 or 1/43 as the base
layer.
Asphalt for bonding a
mineral surface cap to
a mech. attached base
sheet in a double ply
underlayment systetn.
Cut back, asphalt
based, asbestos free,
(ibe4reinforced,
trowdp grade cement
for repak,and flashing
applications.
[!.1� ntt. tc!urer
generic
ger:rric
ge,teric
Lcn:.ittt
Perfonw' ce, Inc.
PCA 119.1. 7527.05
Protect- O- Wrap, inc.
PCA 1194 - 9714.01
W.R. Grace Co.
PCA 1192 -1 1 16.01
gen is
generic
Test Product
1'cszdnct D_1111 C115.1211,1 tts Spccif►Sgions Pescriptlon Wnmaxcura
Asphalt Primer NIA\ ASTM D 41 Cut back, asphalt generic
,\ based coating used to
I. facilitate bonding of
dissimilar materials. .
Roofing Nails
Tin caps
Tile Nails
Roof Tile Mortar _N
( "TilcTitcT"* ")
Valley Flashing
min. 12 ga. %vith
' / head
min. 32 ga.
min. 1'/ o.d.
max. 2" o.d.
min. 3d x 2'W' or
min. 1Od x 3"
N/A I'A 123 Prepared mortar mix I]crr:nu'r+ Roof
dcsigncd for mortar Company, Inc.
sct roof tilt PCA I/94-0614.01
applications.
Roof Tile Mortar N/A PA 123 Prepared mortar mix Quikrete Cw.structio
( "Quikrctc® Roof dcsigncd for mortar Produc:
"file Mortar I/ 1 140 ") set roof tile PCA 1194- 0 ^01.G 1
applications.
Roof Tile Mortar N/A PA 123 Prepared mortar mix Wit. [ions::: Co.
( "flONSAL® Roof dcsigncd for mortar PCA 1194 -06: :8.03
Tile Mortar Mix ") set roof tilt
applications.
Roof Tile Adhesive N/A PA 110 Adhesive designed Polyfoam rf " ducts,
(Polypro® All 160) for use in roof tilt Inc.
applications. PCAll
min. 26 ga:
aria. 16" width
PA 114
Appcmlix is
PA 114
Appendix E
PA 114
Appendix E
ASTM A 525
Product Control No.: 9.
1221.08
Annular ring shank,
hot dipped, cicctro or
mechanically gale.
roofing nails for use
in undcrlayment
attachment.
Corrosion resistant
circular disc for use in
undcrlayment
attachment
Corrosion resistant,
screw or smooth
shank nails for
additional tile
attachment at cave tile
COMICS.
Galvanized steel
valley flashing
generic
generic
generic
genes is
4
. Raul Rodriguez
Test Product
product Dint cnslaus Sassificnihuu PCSgriptiOn MIMI! farittira
Drip Edge min. 26 ga. IA 111 Galvanized steel drip generic
min. 2" face flange edge
min. 2" deck flange
5
Product Control No.: _211-1221.01._
Test Agutsx
The Center for Applied
Engineering, Inc.
The Center for Applied 94 -060A
Enigneering, Inc.
Test Identiflcr
94 -084
1k
Rcdland Technologies P0631 -01
TEST REPORTS,
Raul Rodriguez
Product Control No.: • 94- 1221.08
Test Nntnc /Rcduul
Static Uplift Testing
PA 101
(Mortar Sct)
Static Uplift Testing
PA 101
(Adhesive Set)
Wind Tunnel Testing
PA 108
(Mortar Set)
1`:1's
May 1: >4
March, 1994
July 1994
Professional Servicc 224 -47099 Physical Properties Sept, 15
Industries, Inc. PA 112
Deck Type: Wood, Non - insulated
Deck Description: New construction 19 / 32 " or greater plywood or wood plank.
SYSTEM D: Mortar or Adhesive Set Application
Slope Range: 2 ":12" to 7 ":12"
Note: System 1) is only acceptable in this slope range.
Underlayrncnl:
Roofing "file:
SYSTEMS
Install choice of approved underlayment system, noted on Page 1 of Dade
County Protocol PA 120, in compliance with Section 3.02 of PA 120. See
System Limitation 116.
Install tile in compliance with PA 120 using one of the approved mortars or
adhesives noted in this approval. Mortar or adhesive shall be applied in
compliance with the mortar manufacturer's Rooting Component Product
Control Approval. The mortar or adhesive attachment shall provide sufficient
attachment resistance expressed as a moment to meet or exceed the required
moment of resistance determined in compliance with PA 115 or PA 127. The
mortar and adhesive attachment data is noted in Table 3, attached.
Comments: \ I. For re -roof applications, 1 ' / „” plywood is an acceptable substrate.
2. For mortar set applications, the first three courses of tile shall be nailed with
not Tess than one nail per tile. As an alternate, the first three courses of tile
shall be applied in mortar over n single layer of minimum 12 gn. wire mesh
with square openings of not less than V," which is mechanically attache(' to the
deck with not Tess than one roofing nail every I ft For roof pitches from
6 ":12" to 7 ":12 ", every third tile of every fifth course, beginning at the eighth
course, shall be nailed with not less than one nail per tile.
Raul Rodriguez
Product Control No.: _91122121_,
SYSTEM LIMITATIONS
Product Control No.: _21- 1221.08
I. The standard minimum roof pitch for Monier "Bermuda flat" mortar set or adhesive set tilt
applications is 2" risc in 12" run (2 ":12 "). The maximum roof pitch for mortar set or adhesive set
the applications is 7" rise in 12 "\run (7 ":12 ").
2. Monicr's "13crntuda Flat" tile profile has not been tested for nail -on applications, therefore,
System A (Counter- I3atten Nail -On Application), System 13 (Direct Deck Nail -On Application) and
System C (l lorizontal Batten Nail -On Application) do not form part of this approval.
3. System installation shall be in compliance with the system specifications outlined in this Product
Control Approval. Mortar set or adhesive set tilt shall be attached using an approved mortar or
tile adhesive noted in this approval, the data of which is noted in Table 3 of this Approval. The
method of attachment utilized shall provide sufficient attachment resistance expressed as a moment
to meet or exceed the required moment of resistance determined in compliance with Dade County
Protocol PA 115 or I'A 127.
4, For mortar set applications, the first three courses of tilt shall be nailed with not less than one nail
per tile. As an alternate, the first three courses of tilt shall be applied in mortar or adhesive over a
single layer of minimum 12 ga. wire nlcsh with square openings of not Icss than ' / which is
mechanically attached to the deck with not Icss than one roofing nail every 1 fi For roof pitches
from 6 ":12" to 7 ":12 ", every third tile of every fifth course, beginning at the eighth course, shall be
nail d with not less than one nail per tile.
5. For mortar set or adhesive set tile applications, a field static uplift test by a Dade County
accredited testing agency, in compliance with Dade County Protocol PA 106, shall be required not
Icss than 30 days after application to confirm tilt adhesion. The results of this testing ::hall be
reported to the Building Official and the installer stating that the application has passed or failed PA
106 testing. If the application fails I'A 106 testing, the report shall state which portion of 1!1% test
was failed; Category I (examination for loose tile) or Category 2 (uplift testing of tile). Subsequent
to testing, the installer may repair not more than 5% of field area tiles and 10% of peri; ...ter area
(i.e. ridge /rake) tile with approved tilt adhesive. The installer 511.111 place an identifiable !narking on
each repaired tile for future reference. Any PA 106 re -test shall not include any marked tile.
6. For mortar or adhesive set tile applications, 30/90 hot mopped underlayment applicatici :s may be
installed perpendicular to the roof pitch prior to June 1, 1995 unless stated otherwise by the material
manufacturer. Thereafter, 30/90 underlayment systems shall be installed parallel to the roof pitch in
compliance with Appendix 'A' of Dade County Protocol PA 120.
7. All tiles shall bear the imprint or identifiable marking of the i : ;. ;nufacturer's name or logo for
identification in the field.
8. The Monier "Bermuda Flat" tilt profile has been tested for both wind characteristics and static
uplift performance, therefore, attachment calculations for installation in compliance with Dadc
County Protocol PA 115 or PA 127 shall be done as a'Momcn' Based System'
Raul Rodriguez
SYSTEM LIMITATIONS
(CONTINUED) ,
9. Applications for roofing permits shall include a completed Section 11 of the Uniform Building
Permit, a copy of Monier Roof Tile's current specifications and details, a copy of this Product
Control Approval and a copy of the Product Control Approval of any Roofing Component used in
the proposed rile application. Reference shall be made to appropriate data for the required (ire
rating.
10. The applicant shall retain the services of a Dade County certified testing laboratory to maintain
quality control in compliance with the South Florida Building Code and related protocols. Samples
taken shall be in compliance with Dade County Protocol PA 112, Appendix 'A'.
11. Any amendments to these provisions shall be in compliance with Sections 203 and 204 of the South
Florida Building Bode.
' Product Control No.: 9't- 1221A8
Raul Rodriguez
Table 4: Attachment Resistance Expressed as a Moment - M (tt -Ibf)
from PA 101 Testing
Tile
Profile
Tile
Application
Attachment
Resistance
Monier Bermuda Flat Flat Tile
Mortar Set
39.00
Adhesive Set
118.90
Tile
Profile
Monier Mission
Barrel Tile
Table 2: Restoring Moments due to Gravity - M (ft -Ibt)
from PA 101 Testing
3 ":12"
5.20
DATA FOR ATFACifPvMENT
CALCULATIONS
4 ":12"
5.12
5 ":12"
5.01
Raul Rodriguez
I roduct Control No.: _2,J- 1221.08
,■
6 ":12"
4.09
7°°:12" or
greater
NIA
Table 1: Aerodynamic Multipliers -1 (ft')
from PA 108 Testing
Tile
Profile
1 (ft')
Batten Application
1 (ft')
Direct Deck Application
Bermuda Fiat Flat Tile
N/A
0.24
Tile
Profile
Monier Mission
Barrel Tile
Table 2: Restoring Moments due to Gravity - M (ft -Ibt)
from PA 101 Testing
3 ":12"
5.20
DATA FOR ATFACifPvMENT
CALCULATIONS
4 ":12"
5.12
5 ":12"
5.01
Raul Rodriguez
I roduct Control No.: _2,J- 1221.08
,■
6 ":12"
4.09
7°°:12" or
greater
NIA
PROFILE DRAWING
BERMUDA FLAT FLAT TILE
11'
Raul Rodriguez
1'roduct Control No.: • 91- 1221.08
6::=1
UUILDINO CODE COMPLIANCE UEPADTMENT
SUITE 1607
METT1O -DAVE FLAOlt.:l BUILDING
140 WEST FLAMED MEET
I`IOTIGFQh ACCEPTANCE: S'I'AM? 1111) CONI)11'1( ?N i. MIAMI, FLOR 33l3o -1500
(906 ) 716.2001
FAX (9^5) 776•2goo
Extensions of Acceptance may be considered ;tiler a new appiicatiott has been filed and the supporting
data, test reports no older than ten (10) years, have been re- evnluatcii.
METIIOf'OLITAN DADE COUNTY, FLOnlon
MEMO-DADE FLAGLER BUILDING.
All reports of testing shalt bear the seal, signature and dale of an engineer registered in t1,: Stale of
Florida.
2. Any revision or change in the materials, use, or manufacture of the product or process shall automatically
be cause for termination, unless prior approval is granted for revisions or change.
3. Any unsatisfactory performance of this product or process or a change in Code provisions shall b.: grounds
for re- evaluation.
This acceptance shall not be used as an endorsement of any product for soles or advertising purposes..
5. The Notice of Acceptance number preceded by the words Dade County, Florida, and followed by the
expiration date may lie displayed in advertising literature. If nny portion of the Notice of Acceptance is
displayed, then it shall be done in its entirely.
6. Product approval drawings, where required for permit applications, shall be provided to the applicant by
the manufacturer or his distributors unless otherwise noted in the No;icc of Acceptance. The prints need
not be re- scaled by an engineer.
7. Failure to comply with the Standard Conditions shall be cause for termi Cation of the Approval.
•fills approval supersedes all previous approvals.
Raul Rodriguez
Product Control Division
Supervisor
Job Address: '
The undersigned certifies that the Mortar or Adhesive Set Tile System
Assembly is in compliance with the plans, specifications, and details
submitted by the architect.
STATE OF FLORIDA - COUNTY OF DADE
Before me this day personally appeared
who, being first duly sworn, deposes and says that all information submitted
herein is true and correct.
win to and subscribed before me this /3 th day of
19
°OFFICIAL SEAL'
My commission e Shannon Mille
om
corm
Job Address:
1. General
2. Documentation
123.01 -158
y ! . 71 /E 9 Li r
Signature
Notary Public
State of Florida
APIPIENDI[X 9 E°
METRO-DADE UNIIIFORM[ BUMMING PERMIT
SECTION 111
MORTAR OR AIlDIHI ESIIWIE SET TALE SYSTEMS
Contractor:
Mortar or Adhesive Set Tile Systems
Page - g
Contractor:
The information provided in this Section is required to confirm
Product Control Approval of the proposed tile system assembly;
confirm compliance with the wind load requirements of Chapter 23
of the South Florida Building Code (SFBC); and confirm compliance
with Sections 3403.5 and 3404 of the South Florida Building Code.
The following documents are required for submission with the
Uniform Building Permit application:
Two (2) copies of the proposed tile system assembly's and
associated roofing component's Product Control
Approval(s).
One (1) copy of the tile system assembly and/or roofing
component(s) manufacturer's published application
instructions and literature.
All documents attached herein, filled out and completed in
full.
3. Project llnformation
Check one of the following:
E ew Construction
( Re -Roof
Note: Mortar or adhesive set tile systems are not acceptable as recover
applications.
Mortar or Adhesive Set Tile Systems
Page - Il
Deck Type (check one of the following):
Roof Pitch (fill in):
" : 12"
Process No.
Process No.
Is the deck solid sheathed? (circle 'yes' or 'no')
yes no
❑ Nominal 'h" Plywood (for re -roof only)
❑ JIominal V," Plywood
Wood Plank J _
❑ Other (fill in)
Note: Mortar or adhesive set tile systems shall not be installed at a pitch
greater than 71/4":12 ". Mortar or adhesive set tile applied at a
pitch greater than 5 ":12" and less than or equal to 7 ":12" shall
have the first thrcc courses of tile nailed with not Icss than one
nail per tile. As an alternate, the first three courses of tile may be
applied in mortar over a single layer of minimum 12 ga. wire
mesh with square openings of not less than 3 / which is
mechanically attached to the sheathing with not less than one nail
per 2 ft
Circle 'yes' or 'no' for each of the following:
Have you attached two copies of the tile system manufacturer's
Product Control for the proposed tile system?
I yes no
Have you attached a copy of the tile system assembly and/or
roofing component(s) manufacturer's published, application
instructions and rature
no
Is the proposed underlayment approved for use with this tile
system assembly'
C yes no
Job Address: Contractor:
Project Information (continued):
If the proposcd undcrlayment is self- adhered, have you complied
with the venting requirements of Section 2913.3 (b), (c) and (d) of
the South Florida Building Code?
yes no
Are all related accessories approved for use with this tile system
assembly?
Are the proposed edge metal attachment fasteners in compliance
with the requirements of the South Florida Building Code (minimum
12 ga. annular ri i S1T k corrossion reisistant nails)?
no
4. The Tile System Assembly:
The following information is required to confirm compliance with
Subsections 3403.5(a) and (c) and Section 3404 of the South Florida
Building Code.
Tile:
Tile Name:
Manufacturer:
Tile Material
❑ ay
Concrete
❑ Other:
Product Control Approval Number:
Mortar or Adhesive:
Check one of the following which apply to the proposed tile
securement for use with the proposed tile system assembly:
Mortar or Adhesive Set Tile Systems
Page - 2
Job Address: /� 9 ` ST. Contractor:
no
friv;str
Ae /4e
91e-/ogoioP
Mortar or Adhesive Set Tile Systems
Page - 7
❑ Mortar: Manufacturer:
Mixing Ratio:
❑ N/A
III' Adhesive: Type:
Manufacturer:
Process No.
Tile Fasteners (for first three courses if roof pitch exceeds 5 ":12"
and is less than or equal to 7":12"1:
Check one of the following which apply to the proposed tile
fasteners (for the first three courses) for use with the proposed tile
system assembly:
Minimum 12 ga. galvanized roofing nail:
Length:
❑ Other: Type:
Length:
Note: All tiles shall be installed in compliance with the provisions set
forth in the tile system assembly manufacturer's Product Control
Approval and the minimum requirements set forth in Subsections
3403.5(c) and 3404.2 of the South Florida Building Code. Tile
fasteners in the first three courses (if applicible) shall be of
sufficient length to penetrate the sheathing a minimum of 1" or
through the sheathing thickness a minimum of 'V, whichever is
less.
Underlayment:
The following information is required to confirm compliance with
Section 3403.5(b) of the South Florida Building Code.
BUILDING INFORMATION #2: Roof Plan with Perimeter and Corner Dimensions
Job Site Identification:
Process No.
Sketch Roof Plan, indicating all dimensions, slopes and any roof top equipment.
Also insert variable labeled "a" which rcprcscnts perimeter and corner dimensions
per Chaptcr 23 of the South Florida Building Code.
(See ASCE 7 -88 Fact Sheet Attached )
Job Address:
Job Address:
Underlayment (continued):
Check all of the following which apply to the proposed underlayment
for use with the proposed tile system assembly:
V ASTM #30 asphalt saturated felt with:
Manufacturer:
❑ ASTM #15 asphalt saturated felt with:
Manufacturer:
L Mineral Surfaced Roll Roofing with:
Manufacturer:
❑ Other:
Type:
Manufacturer:
Underlayment Fasteners (if applicable):
Contractor:
Ride etghG Ea Height: Roof j ean Ileight
/^ feet //® feet feet
BUILDING INFORMATION # 1
Job Site Identification:
❑ 19" overlap
❑ 6" overlap
❑ 4" overlap
❑ 19" overlap
❑ 6" overlap
4" overlap
Check one of the following which apply to the proposed
underlayment attachment:
Minimum 12 ga. electro - galvanized roofing nail with
minimum 32 ga. x PI," tin ca.:/
Length: A " t,
a1
Manufacturer: r/r / "
, _
❑ Other:
Type:
Length:
Manufacturer:
Mortar or Adhcsivc Set Tile Systems
Page - 6
Contractor: Process No.
❑ 19" overlap
❑ 6" overlap 5. Related Accessories:
I" overlap
Mortar or Adhesive Set Tile Systems
Page - 3
O
%/; Process No.
Insert Building Ridge Height, Eave Height and Roof Mean ileight.
Also insert applicable information pertaining to the building below.
( See ASCE 7 - 88 Fact Sheet Attached )
Exposure Category:
Classification Category:
At l lurricancc Occanlinc?: Y N
Basic Wind Specd at
Building Location: 110 mph
Building Condition based on
% of openings:
(See Table 9 of ASCE 7 - 88)
Ground Level
Spacing (per tile system assembly Product Control Approvall:
Field: / " o.c.
Laps: " o.c.
Edge Metal (refer to Section 3408.2 of the South Florida Building
Code):
Type:
Dimensions:
Type:
Manufacturer:
❑ Flashing Cement:
Type:
Manufacturer:
g loo,
Gauge or Thickness:
Finish:
Note: All edge metal shall be nailed on the flange and nailed or clipped
at the face in compliance with the provisions set forth in Dade
County Protocol PA 111, marked Appendix 'U' in the South
Florida Building Code.
Adhesives (check one of the following):
❑ Cold Adhesive:
Job Address:
Adhesives (continued): Additional Notes:
Note: Application of adhesives shall be in compliance with the Roofing
Component Product Control Approval and the minimum
requirements set forth in Subsection 3403.5(e)(4)(cc) of the South
Florida Building Code.
Ventilation System (check one or more of the following):
The following information is required to confirm compliance with
Subsection 3401.4(e) of the South Florida Building Code.
Ridge: TypeP egatirize in=
0 Soffit: Type Size
Note: If underlayment is comprised of a self - adhered membrane, both soffit
and ridge ventilation systems are required, unless a base sheet is
applied as an anchor sheet below the self - adhered underlayment.
Note: The Tile System Assembly shall be installed in strict compliance
with the application instructions enumerated in the Product
Control Approval. A permit shall be issued for application of the
specified Tile System Assembly only. Any change to the specified
Tile System Assembly shall require submission of a revised
SECTION II with a copy of SECTION I, noting the permit
number issued.
Job Address: D r/l/S 93 37
Contractor: Process No.
Mortar or Adhesive Set Tile Systems
Page - 4
Contractor:
Af/Z2r)e
Job Site Identification e 7) r
Mortar or Adhesive Set Tile Systems
Page - 5
e
Process No.
Ridge Venting:
(Uapphcable )
Dcck:
rypt
Thickens,:
Underlayment:
Underlayme - mLS
Fastener:
3 ..
12"
FILL IN APPLICABLE ROOFING COMPONENTS WIIICII MAKE UI'
TILE SYSTEM ASSEMBLY. INSERT ANY ADDITIONAL LEADERS
INDICATING ADDITIONAL ROOFING COMPONENTS NOT SHOWN
ON THIS PAGE. ( Where Roofing Component not used in Tile System
Assembly, fill in with "N /A ". )
Head Lap Dimension:
(minimum 2' unless otherwise specified
in she sole system assembly Product Cntrr
Co o Q/ ol
�ol f/
Mortar)
irlr iA0 X71
Mortar /Adhesive: /��
Tile:
Exishng or Pro
SoR Venting:
Tile Fastener:
Edge Meta
Fastener:
Bird Stop:
( (/applicable )
Edge Metal
or Gutter:
V V
Date Job Address g'S,,
Legal Description
Owner's Address
Contracting
Qualifier
WORK DESCRIPTION
Signat
Date:
/ Lessee / Tenant /r/ e•
Notary as . Co' ,burner an or
My Commission Expires:
PERMIT AIFFILIICATIION FO
SEAL°
er
s 11/2/97
on
0
or Condo President
resident
MIIA `MII SAID ]RIES VIIILILAGIE
1W Tax Folio
7. .,
4
Address /502. Tie/ //®
SS# Z ):1- - 0! Phone %Y 5e°/ X -"X 77
State � ON / Municipal # Competency # Ins .Co .
Architect /Engineer Address
Bonding Company Address
Mortgagor Address
Permit Type(circle one): BUILDING ELECTRICAL PLUMBING MECHANICAL
Master Permit # 380%f
i e . Phone 750
Square Ft. ® , Estimated Cost(value) t
WARNING TO OWNER: YOU MUST RECORD A NOTICE OF COMMENCEMENT AND YOUR FAILURE TO DO
SO MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY (IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR
NOTICE OF COMMENCEMENT).
Application is hereby made to obtain a permit to do work and installation as indicated above, and
on the attached addendum (if applicable). I certify that all work will be performed to meet the
standards of all laws regulating construction in this jurisdiction. I understand that separate
permits are required for ELECTRICAL, PLUMBING, SIGNS, POOLS, ROOFING and MECHANICAL WORK.
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will
be done in compliance with all applicable laws regulating cons••..ction and on Furthermore, I
authorize the abo.= -named contractor to do the work state
gnature of
Date:
. ,•0.
or • er- Builder
L SEAL°
• Dilier
?40
% ,� s 1
;, Y
Notary ds:tpe or Owner - Builder
My Commission Expires:
PAVING FENCE SIGH
/S6 a
FEES: PERMIT ke)_ RADON C.C.F. .- NOTARY TOTAL DUE o7 .�
APPROVED: Fire Other
Zoning Building Electrical
Mechanical Plumbing_ Engineering
Architect
Contractor
or Builder
Legal Lot
Description
RC ❑
0
Owner of (
Building
CONTRACTOR OR BUILDER
AMI SHORES VILLAGE, FL \i`RIDA
DATE 19
PER r AT
1\? 3954 Contractors
License No.
t
Work to be performed under this Permit
i
B1
Subdi-
vision
Address of � ` _, Value of 1 Amount of
Building Project $— 1 Permit $
This permit is granted to the contractor or builder named above to construct the building or to install the equipment or device described in the applica-
tion herefor in strict compliance with all ordinances pertaining thereto and with the understanding that the work will be performed in compliance with any
plans, drawings, statements or specifications that may have been submitted to and approved by the proper municipal authorities. This Permit may be revoked
at any time if the work is not done in compliance with such ordinances or if the plans are changed without authorization. A further condition upon which this
permit is granted is the understanding that the contractor or builder named above assumes the responsibility for a thorough knowledge of the ordinances and
regulations pertaining to the work covered hereby whether shown on the plans or drawings or in the statements or specifications ant}tat he assumes respon-
sibility for work done by his agents, servants or employees. / , , / 2 /r
rl
Signed r p` t` "�_.•' �t INSPECTOR
In consideration of the issuance to me of this permit I agree to perform the work covered hereunder in compliance with 11 ordinances and regulations
pertaining thereto and in strict conformity with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village. In ac•
cepting this permit I assume responsibility for all work done by either, myself, my agent, servant or employee.
BY AUTHORITY
AU OT PRINT
•
L .
."
2 - -
I 0
G
t.
•
E L D
rj • • 1 -
„
4
MIAMI SHORES VILLAGE, FLORIDA
BUILDING
ELECTRICAL
PLUMBING
ROOFING
p PERMIT N? 3954
Owner of
Building
Architect
Contractor -
or Builder
Legal Lot
Description
CONTRACTOR OR BUILDER
Work to be performed under this Permit
B1
Address of , Value of ll Amount of
Building Project $ II Permit $
This permit is granted to the contractor or builder named above to construct the building or to install the equipment or device described in the applica-
tion herefor in strict compliance with all ordinances pertaining thereto and with the understanding that the work will be performed in compliance with any
plans, drawings, statements or specifications that may have been submitted to and approved by the proper municipal authorities. This Permit may be revoked
at any time if the work is not done in compliance with such ordinances or if the plans are changed without authorization. A further condition upon which this
permit is granted is the understanding that the contractor or builder named above assumes the responsibility for a thorough knowledge of the ordinances and
regulations pertaining to the work covered hereby whether shown on the plans or drawings or in the statements or specifications an at he assumes respon-
i
sibility for work done by his agents, servants or employees.
DATE 19
Contractor's J
License No.
Subdi-
vision
M,y
Signed INSPECTOR
In consideration of the issuance to me of this permit I agree to perform the work covered hereunder in compliance with ail ordinances and regulations
pertaining thereto and in strict conformity with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village. In as
cepting this permit I assume responsibility for all work done by either, myself, my agent, servant or employee.
BY AUTHORITY
AD9OT PSINT
/ k": T /
F W.
^ '
L_
CDZ
rj rJ I
! I
•
E F.
THIS LICENSE' MUST BE DISPLAYED IN A CONSPICUOUS PLACE,
A PENALTY IS IMPOSED FOR FAILURE TO KEEP THIS LICENSE EXHIBITED AT YOUR ESTABLISHMENT OR PLACE OF BUSINESS
Village
Date Issued
U
THIS LICENSE EXPIRES ;;�,;; `z }, 19 (.r)
In consideration of the sum of
Paid to Miami Shores Village, Dade County, State of Florida,
��.
is hereby licensed to engage in or operate the business of
Licen e
N? 1166
Dollars ($ )
OQ O
V.2- Er.a.c Gt I OAi el- 0A,lc
MIAMI SHORES VILLAGE, FLORIDA
By
THIS LICENSE NOT TRANSFERABLE WITHOUT THE APPROVAL OF THE VILLAGE MANAGER.
MSV 1954
6