515 NE 95 St (6)MIAMI SHORES VILLAGE
BUILDING INSPECTION DEPARTMENT
APPLICATION FOR BUILDING PERMIT
Application is hereby made for the approval of the detailed statement of the plans and specifications herewith submitted for the build-
ing or other structure herein described. This application is made in compliance and conformity with the Building Ordinance of Miami
Shores Village, Florida, and all provisions of the Laws of the State of Florida, all ordinances of Miami Shores Village and all rules and
regulations of the Building Division of Miami Shores Village shall be complied with, whether herein specified or not. A copy of approved
plans and specifications must be kept at building during progress of the work.
Owner's Name and Address . A., Blake
Registered Architect and /or Engineer
Name and address of licensed contractor._ Z..._._G_..__.Pe.e_le.,_.__2011 N. W. 98th Street, Miami
Location and legal description of lot to be built on
Lot Block Subdivision
Street and Number where work is to be done 515___ E. 95th._._Jtzeet
State work to be done and purpose of building (by floors)
Roofing repair work on existing building and roof.
and for no other purpose.
New puilding Remodeling Addition Repairs X No. of Stories
To, be constructed of Kind of foundation Roof Covering
Estimated Total cost of improvements $__385...00 Amount of Permit $
Zone cubage required Plan Cubage
Distance to next nearest building Size of Building Lot
Maximum live load to be borne by each floor
I hereby submit all the plans and specifications for said building. All notices with reference to the building and its construction may
be sent to
The undersigned applicant for this building permit does hereby certify that he understands and accepts his obligations as an employer
of labor under the Florida Workmen's Compensation Act, being Section 5966, Compiled General Laws of Florida, Permanent Supplement,
and has complied with the provisions thereof, and will require similar compliance from all contractors or sub- contractors employed by him
in the work to be performed under this permit; and will post or cause to be posted for inspection on the site of the work such public notice
or notices as are required by the Act. The undersigned agrees to employ only such sub tr tors, on ^. k to be performed under this
permit, as are licensed by Miami Shores Village.
Remarks (Signed)
STATE OF FLORIDA,
COUNTY OF DADE. ss.
Before me, the undersigned authority, a notary public, duly authorized to administer oaths and take acknowledgments, personally ap-
peared
to me well known,
and who, being by me first duly sworn, upon oath deposes and says that he is the.
of the above described construction, that he has carefully read the foregoing application, and that he did sign the same, and that all facts
therein by him stated are true.
Permit No f__h e t Date
Disapproved
(Signed)
to- -c'2"
Date
Date.__Oat 8
No 5i5
3
mead, Sworn to and Subscribed before me.
Notary Public, State of Florida
19 6 5
Street N. E. 95th St.
Building InspectoY v My Commission Expires
PLANNING BOARD DATE
Chairman Member
Member Member
Member Member
Council Approved Date Disapproved Date
NOTE: A charge of $1.00 will be made for making corrections or changes to this application after approval has been obtained from
the Planning Board.
A re- inspection fee of 51.00 will be charged when such re- inspection is made necessary by improper notice for inspection or faulty
materials and /or workmanship.
BUILDING
ELECTRICAL
PLUMBING
ROOFING
Owner of
Building
Architect
Contractor
or Builder
Legal Lot
o PERMIT x° 6889
0
CONTRACTOR OR BUILDER
Description
MIAMI SHORES VILLAGE, FLORIDA
DATE I —
Work to be performed under this Permit
Bl
Contractor's
License No.
Subdi-
vision
Address of t - Value of `- _ . II Amount of
Building , t Project $— 11 Permit $ ` ��
This permit is granted to the contractor or builder named above to construct the building or to install the equipment or device described in the applica-
tion herefor in strict compliance with all ordinances pertaining thereto and with the understanding that the work will be performed in compliance with any
plans, drawings, statements or specifications that may have been submitted to and approved by the proper municipal authorities. This Permit may be revoked
at any time if the work is not done in compliance with such ordinances or if the plans are changed without authorization. A further condition upon which this
permit is granted is the understanding that the contractor or builder named above assumes the responsibility for a thorough knowledge of the ordinances and
regulations pertaining to the work covered hereby whether shown on the plans or drawings or in the statements or specifications and that he assumes respon-
sibility for work done by his agents, servants or employees.
Signed. '`, a 'r \ INSPECTOR
In consideration of the issuance to me of this permit I agree to perform the work covered hereunder in compliance with all ordinances and regulations
pertaining thereto and in strict conformity with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village. In as
cepting this permit I assume responsibility for all work done by either, myself, my agent, servant or employee.
BY AUTHORITY
ABBOT
BUILDING ❑
ELECTRICAL ❑
PLUMBING ❑
ROOFING
Owner of
Building •--
Architect
Contractor
or Builder c.,I ' -e-21e ! s%
Legal Lo.t
Description 1
Address of ,..
Building '--
CONTRACTOR or BUILDER
MIAMI SHORES VILLAGE, FLORIDA 1/
PERMIT x? 9826
Work to be performed under this Permit
•
B1
Date
BY AUTHORITY
19'
Contractor's
License No ' t'
Subdi-
vision
Sq Ft.
Value of I Amount of
Project $ II Permit $
This permit is granted to the contractor or builder named above to construct the building or to install the equipment or device described in the applica-
tion herefor in strict compliance with all ordinances pertaining thereto and with the understanding that the work will be performed in compliance with any
plans, drawings, statements or specifications that may have been submitted to and approved by the proper municipal authorities. This Permit may be revoked
at any time if the work is not done in compliance with such ordinances or if the plans are changed without authorization. A further condition upon which this
permit is granted is the understanding that the contractor or builder named above assumes the responsibility for a thorough knowledge of the ordinances and
regulations pertaining to the work covered hereby whether shown on the plans or drawings or in the statements or specifications and that he assumes respon-
sibility for work done by his agents, servants or employees. .4
. Signed: G(1 /r 4..> I. i 'f II ( INSPECTOR) BY
In consideration of the issuance to me of this pe it I agree to perform the work covered hereunder in compliance with all ordinances and regulations
pertaining thereto and in strict conformity with the pl s, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village.
In accepting this permit I assume responsibility for al work done by either myself, my agent, servant or employee.
MIAMI SHORES VILLAGE
BUILDING INSPECTION DEPARTMENT
APPLICATION FOR BUILDING PERMIT
Application is hereby made for the approval of the detailed statement of the plans and specifications herewith submitted for the build-
ing or other structure herein described This application is made in compliance and conformity with the Building Ordinance of Miami
Shores Village, Florida, and all provisions of the Laws of the State of Florida, all ordinances of Miami Shores Village and all rules and
regulations of the Building Division of Miami Shores Village shall be complied with, whether herein specified or not. A copy of approved
plans and specifications must be kept at building during progress of the work.
7 r19
Date r � 1/ NE
No S . /_�_ ... Street. /!'
Owner's Name and Address_ -. __ _ -._ _. FIEL //_
R e g i s t e r e d Architect and /or Engineer _ . .. .
Name and address of licensed contractor_ C. ille2 UTN _- koof(1vG-- .CO.
Location and legal description of lot to be built on:
Lot__ Block . Subdivision. /_..._._.. Cj
Street and Number where work is to be done .2 / J NE Sr'
State work to be done and purpose of building (by floors). New Zoo f 011! 4001 77 0/t/ a LS 1
STATE OF FLORIDA,
COUNTY OF DADE. j ss
peared - -- -
Chairman - -
Member
Member .
Council Approved
Date ___/ 3
N�- - 1 Nw _ II
- -- and for no other purpose.
New Building .. Remodeling__ ____. ___. Addition 1 __ . Repairs No. of Stories ._i
To be constructed of Kind of foundation___ Roof Covering__ dd lift—
Estimated Total cost of improvements $ 6a, G 0 Amount of Permit $ .". tJ O
Zone cubage required plan Cubage_ _.-
Distance to next nearest building._. __.. Size of Building Lot
Maximum live Load to be borne by each floor___
I hereby submit all the plans and specifications foi said building. All notices with reference to the building and its construction may
be sent to._ _
The undersigned applicant for this building permit doc hereby certify that he understands and accepts his obligations as an employer
of labor under the Florida Workmen s Compensation Act. being Sec:ion 5966, Compiled General Laws of Florida, Pennanent Supplement,
and has complied with the provisions thereof, and will require similar compliance from all contractors or sub- contractors employed by him
in the work to be performed under this permit; and will post or cause to be posted for inspection on the site of the work such public notice
or notices as are required by the Act. The undersigned agrees to employ only such ubcontractors worjvtt )e performe
permit, as are licensed by Miami Shores Village.
Remarks _ __ _ _ _... (Signed)
Before me, :s:; undersigned authority, a notary public, duly authorized to administer oaths and take acknowledgments, personally ap-
to me well known,
and who, being by me first duly sworn, upon oath deposes and says that he is the
of the above described construction, that he has carefully read the foregoing application, and that he did sign the same, and that all facts
therein by him stated are tr ue.
�j
Permit No D 4� /
Disapproved _ ! ate _
( Signed)
Read, Sworn to and Subscribed before me.
Notary Public, State of Florida
Build Inspector My Commission Expires_
PLANNING BOARD._ __ . DATE
Member
Member
Member ..._ .._
_Date Disapproved
Date
NOTE: A charge of $L00 will be made for making corrections or changes to this application after approval has been obtained from
the Planning Board.
A re- inspection fee of 51.00 will be charged when such re- inspection is made necessary by improper notice for inspection or faulty
materials and /or workmanship.
MIAMI SHORES VILLAGE
BUILDING INSPECTION DEPARTMENT
APPLICATION FOR BUILDING PERMIT
Application is hereby made for the approyal of the detailed statement of the plans and specifications herewith submitted for the build-
ing or other structure herein described This application is made in compliance and conformity with the Building Ordinance of Miami
Shores Village, Florida, and all provisions of the Laws of the State of Florida, all ordinances of Miami Shores Village and all rules and
regulations of the Building Division of Miami Shores Village shall be complied with, whether herein specified or not. A copy of approved
plans and specifications must be kept at building during progress of the work.
74
Mr. W.A. Fields
Owner's Name and Address No 515 Street 5 t•
Registered Architect and/or Engineer
Name and address of licensed contractor W.R. Ro bbin s & Sob
Location and legal description of lot to be built on:
Lot__ Block
515 NE 95 Street,
Street and Number where work is to be done
State work to be done and purpose of building (by floors) Remove o
nommummx4xxxxx La
Fee it5.00
Estimated Total cost of improvements $ Amount of Permit $
Zone cubage required _Plan Cubage_
Distance to next nearest building__ Size of Building Lot
Maximum live load to be borne by each floor_
STATE OF FLORIDA,
COUNTY OF DADE. j
Chairman
Member
Member ..__
Council Approved
SS.
Disapproved Date_
( Signed)
PLANNING BOARDL
NOTE: A charge of $1.00 will be made for
the Planning Board.
A re-inspection fee of 51.00 will be charged
materials and/or workmanship.
Roofing Co. NW
Subdivision
Miami
S.
roof, apply 1/30
.C.Barrel tile.
Building Inspector My Commission Expires ..
...........
Notary Public, State of Florida
DATE
Member
Member
Member
__Date Disapproved
pc ( 1_273
lliami
19
tincap nailed, 1/90
3f sq. Cost $585.00
and for no other purpose.
New Building Remodeling Addition Repairs No. of Stories
To be constructed of Kind of foundation Roof Covering
I hereby submit all the plans and specifications for said building. All notices with reference to the building and its construction may
to____!
W R Robbins & Son Roofing Co.-1491 NW 20 St. Miami
be sent _ _
The undersigned applicant for this building permit docs hereby certify that he understands and accepts his obligations as an employer
of labor under the Florida Workmen's Compensation Act, being Section 5966, Compiled General Laws of Florida, Permanent Supplement,
and has complied with the provisions thereof, and will require similar compliance from all contractors or sub-contractors employed by him
in the work to be performed under this permit; and will post or cause to be posted for inspection on the site of the work such public notice
or notices as are required by the Act. The undersigned agrees to employ only such subcontrac or on • k to be •erformed under this
permit, as are licensed by Miami Shores Village.
Remarks (Signed)
Before me, the undersigned authority, a notary public, duly authorized to administer oaths and take acknowledgments, personally ap-
peared .
........ .......
and who, being by me first duly sworn, upon oath deposes and says that he is the
of the above described construction, that he has carefully read the foregoing application, and that he did sign the same, and that all facts
therein by him stated e true.
Permit No Date 9 - 7 Read, Sworn to and Subscribed before me.
to me well known,
Date
making corrections or changes to this application after approval has hen obtained from
lien such re-inspection -4s made necessary by improper notice for insp. tion or faulty
1.
Date 543/0,' Job Address siO AE 9 E
10050 N.E. 2nd
WORK DESCRIPTION: RE - 404f
Square Ft. g00
PEtVII APPLICATION FOR MIAMI SHORES VILLAGE
Si ture of owner and/ortondo President Date
as to 0 et a o Cent 'resident
My Commissionfiz m ires"Y, A ' ' a»
pr
Zoning
Mechanical
FEES: PERMIT �_ ` RADON
APPROVED:
Building
Plumbing
Avenue • Miami Shores, Florida 33138.305- 795 -2204
Legal Description c_ f ' � � (�
Lessee/Tenet )Q-t/lV� l CSC 1SIA Vl9._ H (44 My!)
Owner's Address 5/0 M MI5 57P Pho 3O ' 7 ��g�
Contracting Co. J)a && £O 71 6 ', C' Address 7O 1 `t4 .6f, 112.S/tare S
Qualifier Uat el L1 SS# Phone , 0S, 7v 90 i�
State # l -IhJ1.1�57) !D Municipal # Competency # Ins. Co.
IF THERE IS NO PERMIT PACKAGE ACCESSIBLE ON THE JOB SITE FOR INSPECTORS TO VERIFY,
THERE WILL BE NO INSPECTION. RE- INSPECTION FEE IS $50.00 AND MUST BE PAID IN ADVANCE
BEFORE CALLING FOR ANOTHER INSPECTION.
Permit Type (circle one): BUILDING ELECTRICAL PLUMBING MECHANICAL ROOFING
Tax Folio
Historically Designated: Yes No
Master Permit # 6P- �Oa • q / % (/
Estimated Cost (value) 4e62
WARNING TO OWNER: YOU MUST RECORD A NOTICE OF COMMENCEMENT AND YOUR FAILURE TO DO SO MAY RESULT IN
YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY (IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH
YOUR LENDER OR ANY ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.)
Application is hereby made to obtain a permit to do work and installation as indicated above, and on the attached addendum (if applicable). I certify that
all work will be performed to meet the standards of all laws regulating construction in this jurisdiction. I understand that separate permits are required
for all disciplines.
OWNERS AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws
regulating construction and zoning. Furthermore, I authorize the above named contractor to do the work stated.
•
Signature of Contractor or Owner Builder Date
Date Notary as to Contractor or Owner Builder Date
My Commission Expires
C.C.F 1 ' NOTARY S � 0 0 BOND 3 0 0
11 Electrical
TOTAL DUE . 6 6 s v
Structural Engineer
SECTION 1524
HIGH VELOCITY HURRICANE ZONES REQUIRED OWNERS NOTIFICATION FOR ROOFING
CONSIDERATIONS
1524.1 As it pertains to this section, it is the responsibility of the roofing contractor to provide the owner with
the required roofing permit, and to explain to the owner the content of this section.. The provisions of Chapter
15 of the Florida Building Code, Building govern the minimum requirements and standards of the industry for
roofing system installations. Additionally, the following items should be addressed as part of the agreement
between the owner and the contractor. The owner's initial in the adjacent box indicates that the item has been
explained.
M 1. Aesthetics - Workmanship: The workmanship provisions of Chapter 15 (High Velocity Hurricane
i 2_
ne) are for the purpose of providing that the roofing system meets the wind resistance and water intrusion
performance standards. Aesthetics (appearance) issues are not a consideration with respect to workmanship
provisions. Aesthetic issues such as color or architectural appearance, that are not part of a zoning code, should
be addressed as part of the agreement between the owner and the contractor.
2. Renailiug Wood Decks: When replacing roofing, the existing wood roof deck may have to be
nailed in accordance with the current provisions of Chapter 16 (High Velocity Hurricane Zones) of the Florida
Building Code. (The roof deck is usually concealed prior to removing the existing roof system).
3. Common Roofs: Common roofs are those which have no visible delineation between neighboring
i.e. townhouses, condominiums, etc.). In buildings with common roofs, the roofing contractor and/or
owner should notify the occupants of adjacent units of roofing work to be performed.
� 4. Exposed Ceilings: Exposed, open beam ceilings are where the underside of the roof decking can be
wed from below. The owner may wish to maintain the architectural appearance, therefore, roofing nail
penetrations of the underside of the decking may not be acceptable. The Florida Building Code provides the
option of maintaining this appearance.
5. Ponding Water: The current roof system and/or deck of the building may not drain well and may
c use water to pond (accumulate) in low -lying areas of the roof. Ponding can be an indication of structural
distress and may require the review of a professional structural engineer. Ponding may shorten the life
expectancy and performance of the new roofing system. Ponding conditions may not be evident until the
original roofing system is removed. Ponding conditions should be corrected.
6. Overflow scuppers (wall outlets): It is required that rainwater flow off so that the roof is not
rloaded from a build up of water. Perimeter /edge walls or other roof extensions may block this discharge if
overflow scuppers (wall outlets) are not provided. It may be necessary to install overflow scuppers in
accordance with the Florida Building Code, Plumbing.
7. Ventilation: Most roof structures should have some ability to vent natural airflow through the
...terior of the structural assembly (the building itself). The existing amount of attic ventilation shall not be
reduced. It may be beneficial to consider additional venting which can result in extending the service life of the
roof.
.._.....
►*.4..t ? 5 / 1 / 02_
ner's /Agent's Signature Date
Contractor's Signature
Mt E
_ -- MZA II -D,tDR COUNTY, FLORIDA
-- --- --- , —_
METRO-DADE FLAGLER E UILDING
1lUILDINO CODE COMPLIANCE OFFICE
METRO -DADS FLACLER JUILDINO
140 WEST FLACLER STREET. SUITE 1603
tolAtot. FLORIDA •31J0 -156:
(305) 375.290, FAX 0051 37,5.2603
CONTRACTOR LICFNSIN1: SECTION
( FAX (3( 3) 1
CONTRACTOR ENEORCF:MEN''SECTION
(30i) 373.2966 FAX (305)375.290S
Your application for Product Approval of: PRODUCT CONTROL DIVISION
GAF Rttbervid /1 /or /ifie(f Bitumen Roof Systems fur Steel Deck ow) 373 -2902 FAX 00 ;1 37:.6535
under Chapter 8 of the Code of Miami -Dade County s.;uverlting the use of A lternate 1. • . •• of
Construction, and completely described herein, has been recommended for acceptance 1 by s 'I'vpes e
County Building Code Compliance Office ( t3CC the i�linli D;,d 0) antler the, conditions specified d herein.
This approval shall not be valid after the expiration date stated below. BCCO to BCCO reserves
the requirements reserves
the tight to s��cl.Ire this product or material ttt anytime front a jobsile or manufacturer's plant tor' quality ..
l f this product or (material tails to perform in the approved manner, BCCO may revoke c ontrol tc s di f y
the use of such product or material immediate) - . 11nolty, or s.lspen,I
determined BCCO that this product or material fails tJno revok this approval, ►' 'it is
Code. '1 of the South Florida Building
- rhe expense ofsuch testing viii be incurred by the nnanuf`acturer.
Acceptance No. :00- 0331.09
2
PRODUCT CONTROL NOTICE
OF ACCEPTANCE
G.A.F. tvlateriaals Corporation 1361 Alps Roar!
Wayne NJ 07470
Expires: I I /06/2003
Raul ftodrtv(ECz
A
THIS IS `T� CpurRSIIE't;T, SLC? I)1)1�"t_d�V. Chi3.�1'Product Contra! Division
- - ._._..._. -_.�. ,�[.. PAGES FOR SPECIFIC AND GENE RAL COt\'D1TI 5FTS
BUILDING CODE & PRODUCT REVi[;w CONINII.1'TEE
This application for Product Approval has been reviewed by the DCCO c
and Product Review Committee to be used in Dade County, Florida under the c ondition . th, I3ui a b Code
� sit forth h i above.
Approved: 07/06/2000
+71O15751::2579 HBC =t;F'Fl..`r
I 01 48
999 F0 1
I'IN'Y' 21 C;2 1 • t
•r;1nCISeO !. Quitttanm. R.A.
Director .
Miami -Dade County'
Building Code Complian e Office
5 ? 5.
GAF NIATERIALS CORPORATION
Cate or
§ALL-Ctiks
M axin ur t Dey Pressure
ewe
Fire C as itic� atio,,:
TRADE' NAMES OF PRODUCTS MANUFACTURE° OR LABELED BY APPLICANT:
Product
GAF Asphalt
Concrete Primer
GAF Mineral Sliield® 60 !b. bags
Granules
GAF WeatherCoat®
Emulsion
GAF Premium
Fibered Aluminum
Roof Coating
GAF letblak All
Weather Plastic
Cement
RUBERO1D®
Modified Bitumen
Adhesive
R U [3 EROID,Modified
Flashing Cement
GAF Aluminum
Emulsion
GAF Aluminum Roof
Paint
Dimensio
5 , 55 gallons
1 , 5 gallons
1, 5 gallons
5 gallons
5 gallons
5 gallons
5 gallons
ROOFING SYSTEM APPROVAL
Roofing
SDS /APP, Modified Bitumen
Steel
-60 psf
See General Limitation #1
Test
S nccification
AS1'M D 41
ASTM D 1863
5 gallons ASTM 1227
ASTM D 2824
ASTM D 3019
ASTM D 3409
ASTM 03019
'l'ype III
ASTM D 4586
Type!
2 0148
9P.9 PC12
Product
ucs cr tioit
MAY 21 '132 13:
Acceptance. No.: 0 .t133'.Uu
Approval Date: July" G,it1UtJ
Expiration Date: Nov 0 200
Asphalt concrete primer used to promote
adhesion of asphalt in built -up rooting.
Granules for surfacing of exposed asphalt,
cold process cement or emulsion. GAF
Mineral Shield® Granules shall be used
for flashing applications only.
Surface coating for smooth surfaced roofs.
Fibered aluminum coating.
Refined asphalt blended with a mineral
stabif021' and ribvt•S. Pcrntita adhesion to
wc:t and dr. surfaces.
Fiber reinforced, polymer modified
adhesive;
Fiber reinforced, polymer modified
flashing cement.
Mineral colloidial bituminous emulsion
with reflective aluminum flakes
ASTM 02324, Non fibercd. aluminum pigmented, asphalt
T ype 1 roof coating
Frank Zulaaga,RRC_
Pro t---1i
Fes -Core
Fesco Foam
UltraGard Gold
HO Insu1 -Fixx
Fastener
Instil -Fixx P
Rawl Drive
Rawl Fasteners
ti12
Rawl Fasteners
#14
Rawl .3" Plate
Rawl Spike
Rawlite
Rawlite 3" Plate
+305751857'3 AEC SUPPLY
CAF MATERIALS CORPOR,.tei'ION
3" round
3„ round
Dinrcn tars Test
Dim rut tti
rcrcrttion
various
various
various
3" round
PA 114
PA 114
PA 114
PA 110
Product
Descripti
Polyisocyarrtrratc foam /
fcscoboard insulation
PA 110 P olyisocyanurate foam /
fescoboard insulation
A 110 P olyisocyanurate fuu:u
insulation
PA 114 Insulation fastener tnr
stress plate
PA 114
PA 114
PA 114
PA 114
11 of 48
3" round plastic stress plate
insulation fastener and steel
and plastic stress plate for
concrete deck
insulation fastener for steel
and wood decks
Insulation fastener for use
in steel, wood or concrete
3" round galvalume AZ55
steel plate
Insulation fastener and steel
and plastic stress plate for
concrete deck
3" round galvalume; AZ$5
steel plate for use with
Rawlite fasteners
989 P0t3
Acceptance No.; 00-0331 09
Schuller
international Inc.
Schuller
International Inc.
Schuller
International Inc.
ICI
SFS /Stadler
The Rawlplug
Company loc.
The Rawlplug
Company inc.
The Rawlplug
Company Inc,
The Rawlplug
Company Inc.
The Rawlplug
Company Inc.
The Rawlplu
Company Inc.
Frank Zutoaga R— RC
Roofing Product Control Examiner
1'1H`i' 21 '02 13:25
CAF MATERIALS CORPORATION
EVIDENCE Sun lTI ED:
Test Astencv
Factory Mutual Research
Corporation
Factory Mutual Research
Corporation
Factory Mutual Research
Corporation
Factory Mutual Research Wind Uplift
Corporation FMRC 4470 - PA 114
Factory Mutual Research
Factory Mutual Research Wind Uplift, FMRC
Corp. • 4470 - PA 114
Factory Mutual Research Wind Uplift. FMRC
Corp. 4470 - PA 114
Trinity Engineering
Underwriters
Laboratories, Inc.
Dynatech Engineering
Corporation
Dynatech Engineering
Corporation
+385751A579 (=IBC 'E;I IPPL`i'
Test 1ilentitier
Current Insulation
Attachment
Requirements
Win Uplift
FMRC 4470 -PA 114
Wind Uplift
FMRC 4470 - PA 114
Wind Uplift
I .. .. ..,. ...
Wind Uplift PA 114
Fire Resistance
Classification
UL 790 - PA 114
Wind Uplift
PA 114
Wind Uplift
PA 114
12 of'48
Description
FMRC 1996
J.I. OT4A LAN'
J.I. I V8A4.AN1
J.(. 3X3A2.AM
J.I. 0Y9Q5.AM
J.I. I139A8.AM
J.I. 3D4Q2.AM
4483.04 97 -1
R1306.87NK11819
#3600.02.95.1
#4482.02.95 -1
9_t9 P114 MAY 21
Acceptance No.: 9.(1 4..31,11
Vats
01.01.96
08.26.92
06.28.93
08.02.94
07.29,94
09.0.4.97
04.30.97
06.06.97
01.01,93
02,02.95
02.02.95
Frank Zuloaga. RRC
Rooting Product Control E
'IT 13:35
tNIeinbranc Type.
1)ccl: Type 21:
Approved Typc(s):
13ase sheet:
Ply Sheet:
tNlentbrane:
Sut'facing:
Maximum Design
Pressure:
'vlaxintum Fire
Classification:
&laxintttm Sfope•
Specification No.:
+7
C.\F I \IA't'ERI.ALS CORPORATION , \Cctptolice No.: 00. 11331.09
APP
Steel, Insulated New Constru,:tion ;tnd Re-Root
Dccl: Descriptimt: IS g, , steel
System Type D(2): Base: sheet and insulation simultaneously attached.
All General and System Limitations shall apply.
One ur more layer. of any of the following insulations.
9 P05
ACFoatn -1, E'NRG'Y 2. GAFTE,MPt Isotherm R. L'NRG \' 2 I'ltts. G,- \I'TENI1>
Isotherm RA, GAFT1:vlP Isotherm RN, G;\I '1'EN-1I' Composite, GAFTI:NI1'
Composite A, GAFfEN1P Composite N loosely laid with lirml■ butted joint;.
IVlinintu,n thickness, 1.3 "GAFTEN••1P High Density 1 GA
Fiberboard, minimum thickness 1""
GAFGLAS #75 Base Sheet, GAFGLAS #30 Ultima Base Sheet,
STRATAVEN1'® Nailablc, or RUBE ROIDO 20 be sheet applied to the deck
with 2" side laps with GAFT1TE #12 or #14 Screws and 3" Plates in 4 rows 12"
on center. One row is in the 2" side lap. The other rows are equally spaced
approximately 9" oc in the field of the sheet.
(Optional, required when used with RUI3ERQIt) 20) Onc, tv.o, or three plies
GAFGLAS PLY 4 , or GAFGLASIL PLY 64i' Ply or GA FGLAS FlexPI∎ '" 6
sheet adhered in a full mopping of approved asphalt applied within the EV1' ranee
and at a rate 01 20-40 Ibs. /sq..
One ply of Ruberoid® Torch Smooth, Rl.tberoidh' Torch Granule, Ruberoid
Torch Plus Granule or Ruberoidl) Torch FR torch applied according to
manufacturer's application instructions.
Optional) Install one of the follow tog:
I. Gravel or slag applied at 400 lb. /s.!. and 300 b. /sq. respectively in a Ilood
coat of approved asphalt at 60 lb./sq..
2. GAF Premium Fibcred Aluminum Roof Coating, at 1.3 gal. /sq. or GAI'
\WeatherCoatV Emulsion at 3 gal. /sq. (Torch Smooth applications only)
-60 psf (See General Limitation #7)
See General Limitation
See General Limitation 41.
I- I - I -TS, I- I - I -TSC, I.1- I -TSG, t- I.I -TG I- 1- I- 'i'GG, I- I - I -TG P. I- I- 1 -TGPG.
1- I- l- TGPFR, I- I- 2 - - 1G, 1 -1 -2 -TGG. I- I 2- TGP,I- I -2 -TG PG, I- 1- 2 -IGPF 2, I.2-
1 -TG, 1 -2 -I -TGG, 1.2.1 -TG P. 1.2- ITGPG, 1- 2- I- TG1'I'; ,. �
-
1- 3.1 -TGP, 1-3-1-TG PG, 1.3.1 TGPFR,
a l ot•43
L t:• _ alas, ltd
MAY 21 ' •12 13:26
+311157 . S' IF'FL)
CAE MATERIALS CORPORATION
4701'48
PEPS
MAY 21 '02 13:2
Acceptance No : 00.033 t.w.
GENERAL LItMiTATIONS:
i Fire classification is not part or this acceptance. reler to a current Approved Rooting Materials
Directory for lire ratings of this product.
2 insulation may be applied in multiple layers. The first layer shall be attached in compliance with
Product Control Approval guidelines. All outer layers shall be adhered in a full Ittoppine o ;'
approved asphalt applied within the EVT range and at a rate of 20 - 40 lbs. /sq.. or n►ech:
attached using the fastening pattern of the top layer.
3 All standard panel sizes are acceptable for mechanical attachment. When applied in approved
asphalt, panel size shall be 4' x 4' maximum.
4 An overlay and /or recovery board insulation panel is required on all applications over closed cc(I
loam insulations when the base sheet is fully mopped. 1t`' Iio recovery board is used the base sheet
may be applied using spot mopping with approved asphalt, 12" diameter circles, 24" o.c.: or strip
mopped 8" ribbons in three rows. one at each sidelap and one do■vn the center of the sheet
allowing a Continuous area of ventilation. Encircling of the strips is not acceptable. A G" break
shall be placed every 12' in each ribbon to allow cross ventilation. Asphalt application of either
system shall be at a rninitriutn rate of 12 lbs. /sq. Note: Spot attached systems shall be limited
to :t n1Ixirnurn design pressure of - pal.
5 f spacing for insulation attachment is based on a Minimum Characteristic Force (F') value
of 275 Ibf, as tested in compliance with TAS 105. 1f the fastener value, as tield tested, is below
275 lbt., insulation attachment shall not be acceptable.
6 Fastener spacing for mechanical attachment of anchor /base sheet or membrane attachment is based
on a minimum fastener resistance value in conjunction with the maximum design value listed
within the specific system. Should the fastener resistance be Tess than that required. as determined
by the Building Official, a revised fastener spacing. prepared. signed and sealed by a Florida
Registered Engineer or Architect may be submitted, Said revised fastener spacing utilize the
withdrawal resistance value taken from Miami -Dade Protocol TAS 105 and calculations in
compliance with Miami -Dade Rooting Application Standard RAS 1 17.
7 Perimeter and corner areas shall comply with the enhanced uplift pressure of areas, as
calculated in compliance with Chapter 23 ache South Florida Building Code. Fastener densities
shall be increase for both insulation and base sheet as needed calculated in compliance with
Miami - Dade Roofing Application Standard TAS 117, (When this limitation is specifically
ref'er'red within this NOA, General Limitation #9 will not be applicable,)
8 A11 attachment and sizing of perimeter Hailers, metal profile, and /or flashing termination designs
shall conform with Miami -Dade County Roofing Application Standard TAS 1 1 1 and the ■■ ind load
requirentents of Chapter 23 of the South Florida Building Code.
9 The maximum designed pressure limitation listed shall be applicable to all roof pressure zones (i.e.
field, perimeters, corners). No rational analysis, nor extrapolation shall be permitted for enhanced
fastening at enhanced pressure zones (i.e. perimeters, extended corners. and corners). (\Viten this
limitation is specifically referred within this NOA, General Limitation #7 will not be
applicable.)
L 75 _ 57
+. �_�_�;._�1�_ ter_+ HEr_
UF'PLY
CAF NIATERiALS CORPORATION
Accepi;in No.. m031.6
I TICS OF ACCEJ NCf
—..� , sTA v u�izr, CONDITIONS
Rene■al of this Acceptance (approval) shall be considered after a renewal application has been
filed and the original submitted documentation, including test su ortin
(,1
documents. are no older than eight (8) 1 P S data. engineering
( t Ye:'s.
Any and all approved products shall be permanent/y labeled with the manufacturer's name, e, C'It),
state, and the 1t)ltovrilg statement: "Miami -Dade County Product Control Approved". or as
specifically stated in the specific conditions of this Acceptance.
3 Renewals of Acceptance will not be considered if:
n) Them: has beet, a change in the South Florida Building Code . c
product and the product is not in compliance with the code cute ,� the evaluation of this
b) The product is no longer the same product (identieat) as the one originally approved: c) tt'the Acceptance holder has not complied with ail tic requirements of this acce tance
including.; the correct installation of the product; p
d) The engineer who originally re -►
P p, red, signed and sealed the required documentation initially
submitted. is no longer practicing; the engineering profession.
4 Any revision or change in the materials, use, and /or manufacture of the product or process shall automatically be cause for termination of this Acceptance, unless prior written approval has been
i
requested (through the filing of a revision application with appropriate lee) and granted by y this
3 Airy. of Elie following shall also be grounds for removal of this Acee t; rice•
a) Unsatisfactory performance of this product or process; p
b) IViisuse of this Acceptance as an endorsement orally product, for sales, advertising
odder purposes.
5 or ally
6 The Notice of'Acceptance number preceded by the words Miami -Dade County. Florida ,
;ollowcd by the expiration date may be displayed in advertising literature, Iran and
Notice of Acceptance is displayed, then, it shall be done in its entirety. y portion oldie
7 A copy of this Acceptance as well as approved
shall be provided to the user by the mmanufacturer r or its distributors andtshalltbe ay.ul able for
it applies, at the job site at all titres. The copies need not be resealed by the engineer.
w
Failure to comply with any section of this Acceptance shall be cause fur termination and removal
of Acceptance,
9 This Acceptance contains pages l through 43.
END OF THIS ACCEPTANCE
48 ot'48
9R3
Prank Zulaaga. RRC
Roofing Product Control EN: unifier •
MW 2.1 '02 1::27
+:_ 1 , 'y51c5', 9 AEC SUF'FL
ROOF COVERING MATERIALS (TEVT)
Roofing Systems (TGFU Con
Surfacing: Gravel, 400 lbs /sq, loose laid or applied in a flood coat of hot
roofing asphalt.
2. Deck: NC Incline: 1/2
as Sheet (Optional): One or more layers Type GI, G2 or G3.
Membrane: One or more layers "Ruberoid Torch" (;smooth or granule),
"Ruberoid Torch Plus" (granule), "Ruberoid Mep" (smooth or granule)
or "Ruberoid Mop Plus" (granule).
Coating: Karnak No. 97, 1-1/2 - 3 gal /sq.
3 Deck: NC Incline: 1/4
Insulation (Optional); One or more layers perlite, wood fiber, ;lass
fiber, any thickness.
Base Sheet (Optional): One or more layers 1)pe G1, 62 or O.
Membrane: One or more .avers of " Ruberoid Tcrch" (smooth or
granule), "Ruberoid Torch Plus" (granule), "Ruberoid Mop" (granule) or
" Ruberoid Mop Plus" (granule).
Coating: Karnak No. 97, 1-1/2 3 gal /sq.
4. Deck: C -15/32 Incline: 1/2
Inautation: One or more layers perlite, glass fiber, isocyanurate, ure-
thane, perlite /isocyanurate composite, periite; urethane composite, phe-
nolic, 1-1/2 in. min thickness (offset from plywood joints 6 in,).
Base Sheet: One or more layers of Type G2 or G3.
Ply Sheet (Optional): One or more layers of Type GI,
Membrane: One or more layers of "Ruberoid Torch" (smooth or
granule), "Ruberoid Torch Plus" (granule), 'Ruberoid Mop" (smooth or
granule) or "Ruberoid Mup Plus" (granule).
Surfacing: Karnak No. 97, 1 -1 /2 • 3 gal /sq.
3. Deck: NC Incline: 1/2
Base Sheet (Optional): One or more layers of Type GI, G2 or 03.
Membrane: One or more layers of "Ruberoid 'Torch" (smooth or
granule), "Ruberoid Torch Plus" (granule).
Surfacing (Optional): Karnak "No, 97" or "169" at 1 -3 gal /sq or
Grundy Ind. "20 F Emulsion" at 3 gal /sq.
6. Deck: C -15/32 Incline: 1/2
Insulation: One or more layers perlite, glass fiber, 3/4 in, min, isocy'a-
nur te, urethane, perlite /isocyanurate composite, perlite /urethane cotn-
c.site, phenolic, 1-1/2 in min,
Base Sheet (Optional): One or more layers of Type GI, C2 or C3.
Membrane: One or more layers of "Ruberoid Torch" (smooth or
eranu(er, "Ruberoid Torch Plus" (granule), "Ruberoid Mop" (smooth or
granule) or "Ruberoid Mop Plus" (granule),
Surfacing: Gravel.
Deck: C -15/32 incline: 1/2
Insulation (Optional): One or more layers perlite, wood fiber; glass
nber, isocyanurate, urethane, perlite /isocyanurate composite, perlite/
urethane composite, wood fiber/ isocyanurate composite, phenolic
Base Sheet Two or more layers of Type G2 or G3.
Ply Sheet (Optional): One or more layers of Type G1.
Membrane: One or more layers of "Ruberoid Torch" (smooth or
granule), "Ruberoid Torch Plus" (granule), "Ruberoid Mop" (smooth or
granule) or "Ruberoid Mup Plus" (granule).
Surfacing: Karnak No. 97, 1.1/2 - 3 gal /sq or gravel,
4 Deck: NC Incline: 1/2
Insulation: One or more layers perlite, glass fiber, 3/4 in min, isocya-
nurate, urethane, perlite / isocyanurate. composite, perlite/ urethane com-
posite, phenolic, 1.1i2 in, min.
Base Sheet (Optional): One or more layers of Type GI, G2 or G3.
Membrane: One or more layers of Ruberoid Torch" (smooth or
granule), "Ruberoid Torch Plus" (granule), "Ruberoid Mop" (smooth or
granule) or "Ruberoid Mop Plus" (granule),
Surfacing: "AL MB Aluminum Roof Coating" at 1-2 gat/sq.
9. Deck: C -15/32 Incline: 1/2
Insulation (Optional): One or more layers perhte, glass fiber, 3/4 in,
min, isocyanurate, urethane, perlite /isocyanurate composite, periite/
urethane composite,. phenolic, 1.1 /2 in, min.
Base Sheet: One or more layers of 'Type C2 "GAFGLAS 075 Base Sheet",
hot mopped or mechanically fastened in place.
Pty Sheet: One or more layers of Type CI "GAFGLAS Ply 4 ", hot
mopped in place.
Membrane: 'Ruberoid Mop FR" (granule).
Surfacing (Optional): GAF Fibered Aluminum Coating at 1-1/2 gal /se
-t_ or CAF Weather Coat Emuleinn et 1 eel_
989 FOB
20U2 ROOFING MATERIALS AND SYSTEMS DIRECTORY
ROOF COVERING MATERIALS (TEVT) 9
Roofing Systems (TGFU) Contintri'.i
Insulation (Optional): One or more layers periite, glass fiber, 3/4 i
nun, isocyanurate, urethane, perlite/isocyanurate anposite, perhte
urethane composite, phenolic, 1-1/2 in. min.
Base Sheet: One or more layers of Type G2 "GAFCLA S 075 Base Sheer
hot mopped or mechanically fastened in place.
Ply Sheet: One or more layers of Type C1 "GAFGLAS Ply 4 ", c
"GAFGLAS Ply 6" hot mopped in place.
Membrane: "Ruberoid Torch 170FR" (granule).
Surfacing ( Optiunal): GAF Fibered Aluminum Coating at 1-1/2 gal's
or GAF Weather Coat Emulsion at 3 gal; sq
II, Deck: C-15/32. incline: 1/2
insulation: Isocyanurate, 2 in, min., wood fiber, per ite or glass ftbe:
any thin :kness, hot mopped or mechanically fastened m place )oint
offset 6 in.
Base Sheet: One or More layers of Type G2 "GAFGL.A'; 075 Base Sheet"
hot mopped or mechanically fastened in place.
Ply Sheet (Optional): One or more lavers of Type GI "GAFGLAS Ply 4'
ur "Ply 6" hot mopped in place.
Membrane: ''Ruberoid Torch 170FR" (granule),
Surfacing (Optional): GAF Fibered Aluminum Coame; at 1-1/2 gal; sc.
or GAF Weather Coat Emulsion at 3 gal /sq,
12. Deck: C -15/32 Incline: 1/2
Insulation (Optional): Isocyanurate, perlite or glass fiber, any thick -
neee, hot mopped or mechanically fastened in place. J: ints offset 6 in
Base Sheet: One of more layers of Tvpe G2 "GAFGLAS 075 Base Sheet' ,
ho; mopped or mechanically fastened in place.
Ply Sheet: One or more layers of Type GI "GAFGLAS Ply 4" or "Ply 6",
hot mopped in place.
Membrane: "Ruberoid Torch 170FR" (granule).
Surfacing ( Optional): GAF Fibered Aluminum C'oatin), at 1.1/2 gal /so
or OAF Weather Coat Emulsion at 3 gal /sq.
13. Deck: NC Incline: I; 2
insulation (Optional): l5ocyanurate, wood fiber board, perlite, glass
fiber, anv thickness, hot mopped or mechanically fastened1 w place. Joints
offset. 6 tn.
Base Sheet: One or more layers of Type C2 "GAFGLAS !75 Base Sheet",
hot mopped in place.
Ply Sheet (Optional): One or more layers of Type Cl "GAFGLAS Ply 4"
or "Ply 6" hot mopped in place.
Membrane: "Ruberoid Torch 170FIt" (granule).
Surfacing (Optional): "GAP Fibered Aluminum Cotaing" at 1.1/2
gal / /sq or GAP Weather Coat Emulsion at 3 gal /sq.
c .... 2
eck: NC Incline: I / 2
nsulation (Optional): isocyanurate, wood fiber board, perlite, glass
fiber, any thickness, hot mopped or mechanically iastenec: in place. Joints
offset 6 in,
Base Sheet: One or more layers of "GAFGLAS 075 Btse Sheet ", hot
mopped in place.
Ply Sheet (Optional): One or more layers of "GAF CL,Afi Ply 4" or - Ply
5" hot mopped in place.
Membrane: "Ruberoid Torch 170FR" (granule).
Surfacing (Oprionel): CAF Weather Coat Emulsion app'ied at 3 gal / =•rl
or GAF Fibered Aluminum Coating at 1.1/2 gal /sq.
15. Deck: C-15/32 Incline: I / 2
Insulation (Optional): Perlite, fiber glass, isocyanurate, urethane,
perlite/isocyanurate composite or phenolic.
Base Sheet One or more layers Type C2 or G3 base she t, hot mopped
plpoi mechanically fastened.
Ply Sheet (Optional): One or more layers Type GL het mopped in
ace.
Membrane: "Ruberoid Mup FR" or "Ruberoid Mop 170 FR" (granule).
16. Deck: C -15/32 Incline: 1/2
Insulation (Optional): perlite, fiber glass, isocyanurate, urethane,
periite /isocvanurate composite or phenolic, offset 6 in. from joints.
Base Sheet: One 01 more layers of Type G -2 or G -3 base sheet, hot
mopped or mechanically fastened,
Ply place. Sheet (OpHonat): One or more layers of Type G -1, hot mopped in
Membrane: One layer of . "Ruberoid Torch" or " Ruberoid Mop"
(smooth),
Membrane: One layer of "Ru eroic! Torch 170FR" or " 1 ubermid Man
i''1H't 21 '132 1.
Contractor's Name:
❑ (Low Slope Application)
FT a
FT
FLORIDA BUILDING CODE — BUILDING
DETAIL 1&2
SECTION 1525
HIGH VELOCITY HURRICANE ZONES
UNIFORM PERMIT APPLICATION
Job Address: 5/0 /(.tc 05
ROOF CATEGORY
❑ (Nail -On Tile)
❑ (Asphalt/Fiberglass Shingles) • • ❑ (Metal Roofs/Wood Shingles & Shakes)
ROOF TYPE
❑ New Roof ':` cRe- roofing ❑ Recovering
Flat Roof Area (ft 2■5 b Sloped Roof Area (ft Total (ft Master Permit
Exposure category (per ASCE 7 -98): Building Classification category (per ASCE 7 -98):
ROOF HEIGHT AND SYSTEM DETAILS (Draw details as needed)
N � e ;, P Sam ff\--
DECK TYPE: 5Tg .
FASTENER TYPE:
ATTACHMENT
SPACING
FIELD: PERIMETER: CO
S
otO
RNER:
r
l
r
❑ Repair ❑ Maintenance
r
❑ (Mortar -Set Tile)'
❑ (Other)
r
ROC( RAN
J
FIGURE 152:
15.3 -r
Miami Shores Village
10050 NE 2nd Avenue
Phone: 305 - 795 -2204
Signed:
Building Permit
Permit Number: BP2002 -990
Printed: 5/24/2002 Page 1 of 1
Applicant: JENNIFER O'DONNEL
Owner: O'DONNEL JENNIFER
JOB ADDRESS: 510 NE 95 ST
Contractor DALEY ROOFING INC Contractor's Address: 78 NE 106 ST
Local Phone: (305)754 - 9892
Parcel # 1132060140830 Legal Description: 6 53 42 MIAMI SHORES SEC 2 PB 10 -37 LOTS 10 & 11 BLK 55 LOT SIZE
Fees: Description Amount
FEE2002 -2994 Building Permit Application Fee $60.00
FEE2002 -2995 CCF $1.80
7cF2002 - 2996 Notary Fee $5.00
FEE20t. 2 -2997 Buildier's Bond $300.00
Total Fees: $366.80
Total Fees: $366.80
Total Receipts: $0.00
Permit Status: Approved Permit Expiration: 11/20/2002 Construction Value: $2,450.00
Work: RE ROOF FLAT SECTION
If there is no permit package accessible on the job -site for inspectors to verify, there will be no inspections. Re- inspection
fee is $50.00, which must be paid in advance before calling for another inspection.
This Permit is granted to the contractor or builder named above to construct the building or to install the equipment or device described in the application herefor in strict compliance with all
ordinances pertaining thereto and with the understanding that the work will be performed in compliance with any plans, drawings, statements or specifications that may have been submitted to
and approved by the proper municipal authorities. This Permit may be revoked at any time if the work is not done in compliance with such ordinances or if the plans are changed without
authorization. A further condition upon which this permit is granted is the understanding that the contractor or builder named above assumes the responsibility for a thorough knowledge of the
ordinances and regulations pertaining to the work covered hereby whether shown on the plans or drawings or in the statements or specifications and that he assumes responsibility for work done
by his agents, servants or employees.
ECTOR) BY:
In consideration of the issuance to me of this permit, I agree to perform the work covered hereunder in compliance with all ordinances and regulations pertaining thereto and in strict conformity
with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village. In accepting this permit I assume responisibility for all work done by either
myself, my agent, servants or employes.
\
<�J
(Contractor or Builder) BY:
� n'�:e3alimortat:l <i 6rcnAm'r -emit aF'4e;! i:e
It
t,
Look for blur background on the front of this check, and the hnageSafe® logo on back. If not present, do not rash.
T
DALEY ROOFING, INC.
78 N.E. 106TH STREET
MIAMI SHORES, FL 33138
DATE 6 1035
305 754 - 63-4/630 FL
PAY � jJ ZLG2� �?, G CU
ORDER OF t 4 . /// �I�W-.i iti( / i $ (�
Bank ofAmerica . .
r
ACH Fla 063100277
FOR , •
�ct
11'00395611' 1:06300004 7I: 001.5962129503y
-- 7Ot+ & S
L - -. n.gr. u .m.mt n a gou ru,a.2=m, — ,u,..a u,a . �� _ a .0 a�. u:a.. r u ,,a� ,_, aatoctu
3956
13.4aWel
NP