RF-07-36Issue Date: 1/12/2007
Owner's Name: SAILESH MEHTA
Permit Type: Roof
Work Classification: Roof - New
Job Address: 10480 5 Avenue NE
Additional Information
Miami Shores Village, FL 33138-
Miami Shores Village
10050 N.E. 2nd Avenue
Miami Shores, FL 33138 -0000
Phone: (305)795 -2204 Fax: (305)756 -8972
Permit
Expires: 07/11/2007
Contractor(s)
DALEY ROOFING INC
Phone
(305)754 -9892
Primary Contractor
Yes
Type of Work: New Roof
Classification: Residential
Additional Info:
In consideration of the issuance to me of this permit, I agree to perform the work
covered hereunder in compliance with all ordinances and regulations pertaining
thereto and in strict conformity with the plans, drawings, statements or specifications
submitted to the proper authorities of Miami Shores Village. In accepting this permit I
assume responsibility for all work done by either myself, my agent, servants, or
employes. I understand that separate permits are required for ELECTRICAL,
PLUMBING, MECHANICAL, WINDOWS, DOORS, ROOFING and SWIMMING
POOL work.
OWNERS AFFIDAVIT: I certify that all the foregoing information is accurate and that
all work will be done in compliance with all applicable laws regulating construction
and zoning. Futhermore, I authorize the above -named contractor to do the work
stated.
Building Department File Copy
Applicant Signature
Parcel #:
Block:
Section:
Permit Status: APPROVED
Permit Number: RF- 1 -07 -36
Phone: (305)491 -5729
1122310150010
Lot:
PB:
Total Square Feet: 1670
Total Valuation: $ 10,500.00
Re . uired Ins ' ections
Tin Cap
Hot Mop
Tile In Progress
Up Lift Report
Final Roof
Fees Due
CCF
Education Surcharge
Permit Fee - New Roof
Scanning Fee
Technology Fee
Total:
Amount
$6.60
$2.20
$275.00
$12.00
$6.87
$302.67
Invoice Number
RF - 1 - 07 - 27215
Total:
Amt Due
$302.67
SD
IJAN l 7P4H
Amt Paid
NOTICE: In addition to the requirements of this permit, there may be
additional restrictions applicable to this property that may be found in the
public records of this county.
AND THERE MAY BE ADDITIONAL PERMITS REQUIRED FROM OTHER
GOVERNMENTAL ENTITIES SUCH AS WATER MANAGEMENT
DISTRICTS, STATE AGENCIES, OR FEDERAL AGENCIES.
Date
Wednesday, January 17, 2007
01/17/2007 Check
Receipt
Miami Shores Village
10050 N.E. 2nd Avenue Miami Shores, FL 33138 -0000
Phone: (305)795 -2204 Fax: (305)756 -8972
Permit Number: RF- 1 -07 -36
Invoice Number: RF -1 -07 -27215
Applicant: SAILESH MEHTA
Company Name:
Owner Address:
10480 NE 5 AVE
MIAMI SHORES, FL 33138
Job Address:
10480 5 Avenue NE
Miami Shores Village, FL 33138-
Payment Type Check Number
6650
Amount
$302.67
Change
$0.00
Total Payment: $302.67
Page 1 of 1
Miami Shores Village
Building Department
10050 N.E.2nd Avenue, Miami Shores, Florida 33138
Tel: (305) 7952204 Fax: (305) 756.8972
BUILDING 0 1 110 ( 0 7 Permit NO. g-F0-7-36
PERMIT APPLICATION Master Permit No.
FBC 2001
Permit Type (circle): Building Electrical Plumbing Mechanical
Owner's Name (Fee Simple Titleholder) Ali„ .SAC �/� Phone # / 7 Z
Owner's Address it) Aro
City,/ / Jim / /eS State / Zip .c3
Tenant/Lessee Name Phone #
Job Address (where the work is being done) /0 5 //1,47
City Miami Shores Village County Miami -Dade Zip
NO
Is Building Historically Designated YES
Contractor's Company Name N7 haC,
Contractor's Address
cit A4 lam f
Qualifier Datel Ztzlett
State
Zip < gnfZea
c i 7
JAN 0 9 2007 ti Li
B Y:
Phone # • c 763/ 4'ef 9
State Certificate or Registration No. £k /iO Certificate of Competency No.
Architect/Engineer's Name (if applicable) Phone #
$ Value of Work For this Permit
Type of Work: DAdditiion ['Alteration Tew
`` Repair/Replace ❑ Demolition
Describe Work: /44 , ` 7/ / — 1-
** **** * * * * **** * * ** * * * ** * * * * *F , * *, *, * *** * * * *** ** * * *,r*** * ** **
Submittal Fee $ Permit Fee $ � ` CCF $ C9 GO CO /CC
Notary $ Training/Education Fee $ 2 ' 20 Technology Fee $ 87-
Scanning $ - Radon $ Zoning Bond $
Code Enforcement $ Structural Plan Review. $
Total Fee Now Due $ `
(Continued on opposite side)
JAN. 17p41
- ( A( ‘/;2
Square Footage Of Work : 2 - X/
Bonding Company's Name (if applicable)
Bonding Company's Address
City State Zip
Mortgage Lender's Name (if applicable)
Mortgage Lender's Address
City State Zip
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING, SIGNS,
WELLS, POOLS, FURNACES, BOILERS, HEATERS, TANKS and AIR CONDITIONERS, ETC
OWNER'S Ali DAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR
PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING,
CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF
COMMENCEMENT."
Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subjec to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site
for the first inspection w ich occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the
inspection will not be approv F. nd a reinspection fee will be charged
i_ _Signature
Signature , „
Contractor
The foregoing instrument was ac ledged before me this r The foregoing instrument was acknowledged before me this
dayof + a�f, 20 e27 ,by day of ,20� ,by
who is personally known to me oar who has produced who is personally known to me or who has produced
My Commission Expires:
As identification and who did take an oath.
NO
Sign= nt
Print: f r ' "ommtsaton OD245382
M . 4u
NOTARY PUBLI
Sign:
Print:
My Co; u ssion Expires:
tification and who did take an oath.
********************** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** * * * * * * * * * *# * * * ** ***** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
APPLICATION APPROVED BY:
chc 05/13/03
PIans Examiner
Engineer
Zoning
N
2. Retreats! Wood Decks: When rep
in accordance with the current provi skrns of
Code. (The roof deck is usually concealed prior to
3. Common Roofs: Common roofs
units (i.e. townhouses, condorniniums, etc.). in
ould notify the occupants of adjacent units of
4. Exposed Ceilings: Exposed. open
from below. The owner may w to maintain the
penetrations of the underside of the decking m
option of maintaining this appearance.
Property Address
Rev:112012006,Computer &M OM Building Department
/ 1 / 01
Date
Permit Number
1
Contractor's Signature
JA
BY : __
TIE
092001
SECTION 1524
HIGH VELOCITY HURRICANE ZONES REQUIRED OWNERS NOTIFICATION FOR ROOFING
CONSIDERATIONS
1524.1 As it pertains to this sermon, it is the responsibility of the roofing contractor to provide the owner with the
rid roofing perrnit, and to explain to the owner the content of this section.. The provisions of Chapter 15 of
the Florda Barring Code, re govern the minimum requirements and standards of the industry for roofing
system installations. Additionally, the thllewing item should be addressed as part of the agreement between the
owner and the contractor. The owner's irdial in the adjacent box indicates that the item has been explained.
. Aesthetics - Workmanship: The worionanshIp proviskms of Chapter 15 (High Velocity Hurricane Zone)
are for the purpose of providing that the roofing system meets the wind resistance and water intrusion
performance standards. Aesthetics (appearance) issues are not a consideration with respect to workmanship
provisions. Aesthetic issues such as color or arc bitectuual appearance, that are not part of a zoning code, should
addressed as part of the agresrrerrt between the owner and the contractor.
wood roof deck may have to be renatled
Hurricane Zones) of the Florida Building
roof system).
delineation between neighboring
the roofing contractor and/or owner
the underside of the goof • •. can be
ecturat appearances •Vierffore, • • • nail
le. Th Florida Buinpg.ode irides the
•
•
•
•
•
•
• •
� . Ponding Water The current roof syst- = or d -; of tt s bulk ng mays ;drain vuelt ;arid may •
ww� water to
pond (aaomulate) in low- tying areas of the roof. Ponding can be apy in ration et shucteral
distress and may require the review of a professional structurat engineer. Pondh g •rjnay shorter The life
expectancy and performance of the new roofing system. Ponding conditions may not b@ • p 4cI %nt until the original
roofing system M ste removed. Fording condtions should be ccorrected. • • • • • ••••
•
• . , Overflow scuppers (waft outlets): It is required that rainwater flow off pr tat the •r if is not
ove oaded from a build up of water. Perirneterlledge watts or other roof extensions may block the cfschrge if
overflow scuppers (wail outlets) are not provided. It may be necessary to install overflow scuppers in aax&danc e
the Florida Buiidmg Code, Pkunbing.
7. Ventilation: Most roof shut:trues should have some ability to vent natural airflow through the interior of
the assembly (the building limit). The existing amount of atticverblaton shall not be reduced. It may be
bene N , consider add F i • Y venting wit can result in exlendmg the service life of the roof.
•
•
•
•
i
✓ Low Slope
✓ Asphaltic Shingles
✓ Prescriptive BUR -RAS 150
/ Roof Type
'< New Roof r Re- Roofing r Recovering r Repair r Maintenance
Are there Gas Vent Status loot on the roof? r Yes Xtio
Low slope roof area (tt. Steep Sloped area (0. 70
Roof System Information
fi
A lA• fir Alkifi ohlAn"..,,rn"rtrcta ri livo /..1n. hrt„
Page 2
High Vets Hurricane Zone Uniform Roofing Perm* Ammon Form
IMAIDDADE COMITY B1Jt;.DlNG DEPARTMENT ELECTRONIC APPLICATION
ftetkon A (General information)
Master Permit No. Process No.
I eita D 3 ken-
Coiihras Maisie: Job Address:
1 ' bate./ /e00(fi /NC. 1 /0 '/e) A.6
Roof Category
✓ Mechartiatly Fastened Tile 74ortarlAdhealve Set Tile
✓ Metal Panel/Shingles r Wood Shingles/Shakes
✓ Other:'
Ifyes,whattype? E Natural r LPGX
. ...
.a/ �► •
•
Total 0000
•• • •
Section B (Roof Plan) •
Skatdt Roof Ram Mate aft levels and scions, roof drains, scuppers, overflow scuppers aid overitow dnIdivinictude dimentions
of sections and levels. (( dearly Mang? dsnet of elevated Plasm zones and men ofparepets • • ... • • 0 0 0 0 •
Perimdert (a j= t conersize(a' x ary: � — - - • • •
• 00
• • •
• •
• •
• •
•• •
Page „'of 1
••••
•
0
• •
000
•.• •
• .
•
• •
• •
1/9/7(107
•
•
•
• •
Rood Slope: �3 "112"
Roof Mean Height g.:1 ' e
Ridge Ventilation: I 13 f 13
Method of Tile Attachment
Pool s
Alternate Tile Attachment Method:
Clip Spacing for Metal Roof Panels
Field: � Perimeters: � Comers: I!
Perirruater Width: I�-
Section D (Steep Sloped Roof System)
Page 4
Aftemate Deck Type:
High Velocity Hurricane Zone Uniform Roofing Permit Application Form
MIAMI -DADE COUNTY BUILDING DEPARTMENT ELECTRONIC APPLICATION
Roof System suer: I ig L l/ A
Notice of Acceptance Number: I O(O 09040, !/
Minimum I1eSign Wind Pry, If Ap dkadele (from RAS 127 or Calculations):
P 1: I P 2: 11 O• PP JOO. t
Sloped System Description
Deck Type: 1 Plywood A
Cap Sheet TypetAdhesive hype: •
6969
underlayment type: ••••
I •
•
Banter Board: •
1 nIFire t4 ....__ . •
•
•••• •••• •
•
Optional Mailable Substrate)! .... •
••••
•
• ..
•• •
1. "fi cap 2 nog
• •
1
Roof Covering: ▪ • •
1 fh -Tu5fi 'S°` +-b C.i 49-1 1 11 , 6
Roof Covering Attachment Method:
1 =R Ly (--v. m rysro ti -S 1 VL
Drip Edge size & Cauge:13' face 26 ga.
Drip Edge Materiel Type: IGalvinized Metal J
Drip Edge Fastener Type:
Hook Strip/Cleat ga. or weight I WA A
.... •
•
R1..•iirtAA 1I017(111l
.•
• •
High Velocity Hurricane Zone Uniform Roofing Permit Application Form
MIAMI -DADE COUNTY BUILDING DEPARTMENT ELECTRONIC APPLICATION
Section E (Tile Calculations)
For Moment based tile systems, chose either Method 1 or 2. Compare the values
for Mr with the values from Mf. If the Mf values are greater than or equal to the
Mr values, for each aea of the roof, then the tile attachment method is
acceptable.
Method 1 "Moment Based Tile Calculations Per RAS 127"
P 1: 41. t x A 11.43-Mg: 5,9 = Mr1: 5. 53 NOA Mf:
P 2: /00,b x A . (, Mg: 6, = Mrl: NOA Mf: /
P3: 100.1, xA 0 2H. / , -Mg: 9 = Mr1: /'.7i.S NOA Mf:
ethod 2 "Simplified Tile Calculation Per Table Below" : • •.
Mr Required Moment Resistance*
Mean Roof Height
in Feet
Roof Slope
2:12
3:12
4:12
5:12
6:12
7:12
Page 5
} http: // w«ry Irt da e.govbu tai g�rooling era air
*This Table must be used in conjunction with a list of moment based tile
systems endorsed by the Broward county Board of Rules and Appeals.
•
•
Required Moment of Resistance (Mr) From the Table Below: . ,349 NOAUt7,.
• •
•• • •
• • •
• •
• •
•
.•
•• •
Page 1 of 1
• •
•
•
••••
• •
••••
• ••
• • •
•
•
••••
• •
•••• • •
••• • • •
• •
ill* CAW
.•
•
• •
• •
• •
•
•
MI A MID
BUILDING CODE COMPLIANCE OFFICE (BCCO)
PRODUCT CONTROL DIVISION
NOTICE OF ACCEPTANCE (NOA)
Clay Forever, LLC
6645 NW 77 Avenue
Miami, FL 33166
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials.
The documentation submitted has been reviewed by Miami -Dade County Product Control Division and accepted
by the Board of Rules and Appeals (BORA) to be used in Miami Dade County and other areas where allowed by
the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control
Division (In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to
have this product or material tested for quality assurance purposes. If this product or material fails to perform in
the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately
revoke, modify, or suspend the use of such product or material within their jurisdiction. BORA reserves the right
to revoke this acceptance, if it is determined by Miami -Dade County Product Control Division that this product or
material fails to meet the requirements of the applicable building code. ••••
• This product is approved as described herein, and has been designed to comply with the Florida Building brie' •
and the High Velocity Hurricane Zone of the Florida Building Code. •
DESCRIPTION: Altusa "S" Clay Roof Tile •
.... •••• • • •• LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, c3tf, Date and• • • •
following statement: "Miami -Dade County Product Control Approved ", unless otherwise not he ein. :
RENEWAL of this NOA shall be considered after a renewal application has been filed and theie has been lip . •
change in the applicable building code negatively affecting the performance of this product.' •••• •
TERMINATION of this NOA will occur after the expiration date or if there has been a retsioti or chat:ring be
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of alb,,
product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply►'
with any section of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by
the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall
be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors
and shall be available for inspection at the job site at the request of the Building Official.
This revises NOA #05- 0901.06 and consists of pages 1 through 7.
The submitted documentation was reviewed by Alex Tigera.
e
MIAMI-DADE COUNTY, FLORIDA
METRO -DADE FLAOLER BUILDING
140 WEST FLAGLER STREET, SUITE 1603
MIAMI, FLORIDA 33130-1563
(305) 375 -2901 FAX (305) 375 -2908
NOA No.: 06- 0706.09
Explratlon Date: 12/16/07
Approval Date: 10/19/06
Page 1 of 7
•
•
•'
•
• •
•
•
ROOFING ASSEMBLY APPROVAL
Category: Roofing
Sub - Category: Roofing Tiles
Material: Clay
1. SCOPE
This renews roofing system using Altusa One Piece S' Clay Roof Tiles, as manufactured by
Alfareria Del Turbio, S.A. (ALTUSA) in Venezuela and described in Section 2 of this Notice of
Acceptance. For locations where the pressure requirements, as determined by applicable Building
Code does not exceed the design pressure values obtained by calculations in compliance with RAS
127 using the values listed in section 4 herein. The attachment calculations shall be done as a
moment based system.
2. PRODUCT DESCRIPTION
Manufactured bv
A 1.2 iicant Dimensions
Altusa One Piece `S' L =18 V" TAS 112
Tile W = 10.5"
'h" thick nominal
3.25" high
Trim Pieces Length: varies
Width: varies
varying thickness
Clip L = 6"
D = 0.125"
Clip L&h =2"
W = vz"
0.05" thick
2.1 SUBMITTED EVIDENCE:
Test Aeencv
The Center for Applied
Engineering, Inc.
The Center for Applied
Engineering, Inc.
The Center for Applied
Engineering, Inc.
The Center for Applied
Engineering, Inc.
Celotex Corporation Testing
PRI Asphalt Technology, Inc.
Test Product
,5nedflcations Descriptioi
•••••
TAS 112 Accessory trim, clay roof pi for use at • • • •
hips, rakes, ridges and valley termination$.••_•
Manufactured for each tile wale.
TAS 114 Tile clip
TAS 114 L Shaped file clip
Test Identifier
94-083
94-084
25- 7200 -1
Project No. 307025
Test #MDC -78
MTS 520649
CLF- 003 -02 -01
High profile clay roof tile. For direct deck or
batten nail -on, mortar set or adhesive set
applications with minimal headlap of 2-1/2"
Test Name/Renort
Static Uplift Testing
TAS 101 (Adhesive Set)
Static Uplift Testing
TAS 101 (Mortar Set)
Static Uplift Testing
TAS 102
(Quick -Drive Screws,
Battens)
Wind Driven Rain
TAS 100
TAS 102(A)
TAS 102
••••
• •
• •
•• ••
• • •
• •
April 1994
May 1994
Feb. 1995
Oct. 1994
• •
••••
• ••
• I •
••••
•
• •
••
• •
• • •
•• • ••• •
Date • •
••
May 2000
October 2001
NOA No.: 06-0706.09
Expiration Date: 12/16/07
Approval Date: 10/19/06
Page 2 of 7
•
•
Test Atencv
Redland Technologies
Redland Technologies
Redland Technologies
Redland Technologies
Redland Technologies
Walker Engineering, Inc.
Walker Engineering, Inc.
Walker Engineering, Inc.
Walker Engineering, Inc.
Walker Engineering, Inc.
3. LIMITATIONS
Test Identifier
7161 -03; Appendix III
7161-03
Appendix II
Letter Dated Aug. 1,
1994
P0631 -01
PO402
Calculations
Evaluation Calculations
Evaluation Calculations
Evaluation Calculations
Evaluation Calculations
Test Name/Reuort
TAS 102
Wind Tunnel Testing
TAS 108 (Nail-On)
Wind Tunnel Testing
TAS 108 (Nail -On)
Wind Tunnel Testing
TAS 108 (Mortar Set)
Withdrawal Resistance
Testing of screw vs. smooth
shank nails
Aerodynamic Multiplier
25 -7183
25 -7094
25 -7496
25 -7584
25- 7804b -8
25- 7804 -4 & 5
25- 7848 -6
att
Dec. 1991
Dec. 1991
Aug. 1994
July 1994
Sept. 1993
March 1999
March 1995
February 1996
April 1996
December 1996
• •
• • •
•. •
•
••..
• •
.. • •
• •
•
3.1 Fire classification is not part of this acceptance. •••• .•••
3.2 For mortar or adhesive set tile applications, a static field uplift test shalt be. pierfomned ,ip• •
accordance with RAS 106. ' • •
3.3 Applicant shall retain the services of a Miami -Dade County Certified Laboratory to pe=farn.'
quarterly test in accordance with TAS 112, appendix `A'. Such testing shell t 'submitted to
the Building Code Compliance Office for review. • • • • • .
3.4 Minimum underlayment shall be in compliance with the applicable RoliSng' ®pplicat1aRs
Standards listed section 4.1 herein. • •
3.5 30/90 hot mopped underlayment applications may be installed perpendicular to the roof slope!'
unless stated otherwise by the underlayment material manufacturers published literature.
3.6 This acceptance is for wood deck applications. Minimum deck requirements shall be in
compliance with applicable building code.
3.7 May be installed on slopes 7:12 and greater.
4. INSTALLATION
4.1 'Altusa One Piece S' Clay Roof Tile and its components shall be installed in strict
compliance with Roofing Application Standard RAS 118, RAS 119, and RAS 120.
4.2 Data For Attachment Calculations
NOA No.: 06- 0706.09
Expiration Date: 12/16(07
Approval Date: 10/19/06
Page 3 of 7
•
•
• •
•
•
• •
.
•
•
•
•
•
Table 1: Average Weight (W) and Dimensions (I x w )
- Tile Profile
Weight -W (Ibf)
L cn9th-1(R)
Width -vi (ft)
Altusa 'S' Tile
6.9
1.52
0.875
Tile
Profile
Table 2: Aerodynamic Multipliers - (ft)
(ft)
Batten Application
(ft)
Direct Deck Application
Altusa 'S' Tile
0253
0274
The
Profile
Table 3: Restoring Moments due to Gravity - (ft Ibf
6 °:12°
3 °:12°
or less
4 °:12°
5 °:12
7 °:12° or
greater
Musa 'S' Tile
Battens
4.47
Direct
Deck
Battens
Direct
Deck
5.35 4.40
5.27
Battens
4.31
5.16 T 4.20
Direct
Deck
5.03
Battens
4.08
Direct
Deck
4.89
Tile
Profile
Table 4: Attachment Resistance Expressed as a Moment - Mf (ft-ibf)
for Nail -On Systems
Direct Deck
(Min 15/32"
plywood)
Fastener Type
Altusa 'S' Tile 2 -10d Ring Shank Nails
1 -10d Smooth or Screw
Shank Nail
28.6
5.1
Direct Deck Battens
(Min. 19/32"
plywood) • •
• •
• , •
412
6.8
•
•
••,••• 19.4;•••
••.'8•• 2.8 •
••••
Altusa ''SD
Tile'
Altura
Tile
2 -10d Smooth or Screw
Shank Nails
1 .#8 Screw
2 .#8 Screws
1 -1 Od Smooth or Screw
Shank Nail (Field Ciip)
1 -10d Smooth or Screw
Shank Nail (Eave Clip)
2 -10d Smooth or Screw
Shank Nails (Field Clip)
2 -10d Smooth or Screw
Shank Nails (Eave Clip)
1 Screw '
head of tile)
6.9
28.7
582
23.1
29.3
27.6
38.1
1 Screw with Altusa Clip (See cll details)
with clip (at the 187.1
352
1 Screw with clip (at the
water course of tile)
1. Screw must be installed In the inside nail hole located nearest to the hump of the tile.
• 92
• 1,•• 7.3
••■i•.•
• •4
28.7 " • •
582g 26.8 •
• • 19.0 • •••.
• . ••••
23.1
29.3
•• • 24.0••
•
27.6
38.6
38.1
187.1
352
41.8
N/A
N/A
NOA No.: 0640706.09
Expiration Date: 12/16/07
Approval Date: 10/19/06
Page 4 of 7
•
•
•
•
•
•
•
•
•
•
. •
•
• •
. .
••■••
•
•
n
Profile
Altusa `S' Tile
Table 5: Attachment Resistance Expressed as a Moment M (ft -Ibf)
for Two Patty Adhesive Set Systems
Tile Application Minimum Attachment
Resistance
Adhesive
29.33
2 See manufactures component approval for Installation requirements.
3 Flexible Products Company TileBond Average weight per patty 10.7 grams.
Polyfoam Product, Inc. Average weight per patty 8 grams.
Tile
Profile
Table 5A: Attachment Resistance Expressed as a Moment - Mf (ft -Ibf)
for Single Patty Adhesive Set Systems
Tile Application Minimum Attachment
Resistance
Altusa `S' file
Polyfoam PolyProm'
Polyfoam PolyProm'
68.5`
38.7'
4 Large paddy placement of 63 grams of PoiyProTM.
5 Medium paddy placement of 24 grams of PolyProw.
Table 5B: Attachment Resistance Expressed as a Moment - M (ft -Ibf)
for Mortar Set Systems
Tile
Profile
Altusa `S' Tile
Tile
Application
Mortar Set'
Attachment
Resistance
...
2450
•
•
5.
•• • •
LABELING
All tiles shall bear the imprint or identifiable marking of the manufacturer's pr. p or logo, o!
following statement "Miami -Dade County Product Control Approved ". • . T . • • • , • • •
IDENTIFICATION MARK FOR ALTUSA `S' CLAY ROOF TILE
LOCATED UNDERNEATH TILE
. . .
•
•
•
• ..
• • •
....
* * *
ALTUSA MADE IN VENEZUELA *•
6. BUILDING PERMIT REQUIREMENTS
6.1 Application for building permit shall be accompanied by copies of the following:
6.1.1 This Notice of Acceptance.
6.1.2 Any other documents required by the Building Official or applicable building
code in order to properly evaluate the installation of this system.
NOA No.: 06
Expiration Date: 12/16/07
Approval Date: 10/19/06
Page 5 ef7
•
.•
• •
• •
• •
'SPANISH S•
TILE BY AL
(R)
CLIP DETAIIs
CUP WITH ONE (1) SCREW
ATTACHED TO DECK
PROFILE DRAWINGS
ALTUSA 'S' CLAY ROOF TILE
2.112 OVERLAP
(COVERS PIN HOLE)
CUP
• •
• • •
•• •
•
SCREW IN THE INSIDE t` ;.. 6
•
NEAREST TO THE Hi 6P 71E m••••. • •
•••• ••••
DECD • 0.
••••
• •
••••
• •
•
• •.
• • •
••••
•
• • ••••
•
•
• • ••••
• • •
•• • ••• •
NOA No.: 06-0706.09
Expiration Date: 12/16/07
Approval Date: 10/19/06
Page 6 of 7
•
•
• •
• •
SCREW (HOLDS
CUP ONTO DECIQ
'SPANISH S°
TILE BY ALTUSA
(TIM)
CLIP PLACEMENT DETAIL
CLIP DETAILS (CON'T)
2 UY OVERLAP
(COVERS PIN
HOLE)
DECK
END OF THIS ACCEPTANCE
SCREW IN THE INSIDE NAIL HOLE
NEAREST TO THE HUMP OF THE TILE
DECK
11/4 : 3u4 314
••• ••••
• •
••••
• 2 lir SCREW •
• • • • •
•• ••••
•••• •
• •
• ••••
• •
• • •
•• •
••
••••
• •
VAN
• AL U• •
•••• •
•
•••• •
• • • •
NOA No.: 064706.09
Expiration Date: 12/16107
Approval Date: 10/19/06
Page 7 of 7
•
•
• •
• •
• •
••
•
• •
MIAMFDADE
BUILDING CODE COMPLIANCE OFFICE (BCCO)
PRODUCT CONTROL DIVISION '
NOTICE OF ACCEPTANCE (NOA)
Polyfoam Products, Inc.
11715 Boudreaux Road
Tomball, TX 77375
MIAMI -DADE COUNTY, FLORIDA
METRO -DADE FLAGLER BUILDING
140 WEST FLAGLER STREET, SUITE 1603
MIAMI, FLORIDA 33130 -1563
(305) 375 -2901 FAX (305) 375 -2908
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials.
The documentation submitted has been reviewed by the BCCO and accepted by the Building Code and Product
Review Committee to be used in Miami Dade County and other areas where allowed by the Authority Having
Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The BCCO (In Miami Dade County) and/or the
AHJ (in areas other than Miami Dade County) reserve the right to have this product or material tested for quality
assurance purposes. If this product or material fails to perform in the accepted manner, the manufacturer will incur
the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use of such product or
material within their jurisdiction. BCCO reserves the right to revoke this acceptance, if it is determined by BCCO
that this product or material fails to meet the requirements of the applicable building code.
••••
This product is approved as described herein, and has been designed to comply with the Hi h V p city H:tarrieane
Zone of the Florida Buildin g Code.
• V. • • •
•
DESCRIPTION: Polypro® AH160 •
•
•
•••• ••••
RENEWAL of this NOA shall be considered after a renewal application has been filed ancJ theelias betimes
change in the applicable building code negatively affecting the performance of this product. • : . • •
•• •. ••••
TERMINATION of this NOA will occur after the expiration date or if there has been a re$l'st4d Or change ta the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any' • •
product, for sales, advertising or any other purposes shall automatically terminate this NOPa Fa!tuee to comply
with any section of this NOA shall be cause for termination and removal of NOA.
..
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by
the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall
be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors
and shall be available for inspection at the job site at the request of the Building Official.
This NOA renews NOA No.01- 0521.02 and consists of pages 1 through 7
The submitted documentation was reviewed by JRrge L. Acebo.
NOA No.: 06- 0201.02
Expiration Date: OS/10 /11
Approval Date: 04/13/06
Page 1 of 7
• •
• •
• •
•
•
•
• •
ROOFING ASSEMBLY APPROVAL:
Category: Roofing
Sub Category: Roof tile adhesive
Materials: Polyurethane
SCOPE:
This approves Polypro® AH160 as manufactured by Polyfoam Products, Inc. as described in Section 2
of this Notice of Acceptance. For the locations where the design pressure requirements, as determined by
applicable building code, does not exceed the design pressure values obtained by calculations in
compliance with Roofing Application Standard RAS 127, for use with approved flat, low, and high
profile roof tiles system using Polypro® AH 160. Where the attachment calculations are done as a
moment based system for single patty placement, and as an uplift based system for double patty systems
PRODUCTS MANUFACTURED BY APPLICANT:
Product
Polypro® AH160
Foampro RTF1000 N/A
ProPack® 30 & 100 N/A
PHYSICAL PROPERTIES:
Property
Density
Compressive Strength
Tensile Strength
Water Absorption
Moisture Vapor Transmission
Dimensional Stability
Closed Cell Content
Dimensions Test
Specifications
N/A TAS 101
Test
ASTM D 1622
ASTM D 1621
ASTM D 1623
ASTM D 2127
ASTM E 96
ASTM D 2126
ASTM D 2856
Product Description
Two component polyurethane foam
adhesive
Dispensing Equipment
Dispensing Equipment
PRODUCTS MANUFACTURED BY OTHERS: • •
. •
Results .
• • •
.. •
....
• • •
.. • • •
Any Miami Dade County Product Control Accepted Roof Tile Assembly having a currens NQA which
list moment resistance values with the use of Polypro AH160 roof tile adhesive.
• ..
• • •
....
.. ..
1.6 lbs./ft.
18 PSI Parallel to rise
12 PSI Perpendicular to rise
28 PSI Parallel to rise
0.08 Lbs.IFt
3.1 Perm / Inch
+0.07% Volume Change @ -40 F., 2 weeks
+6.0% Volume Change @158 100%
Humidity, 2 weeks
86%
Note: The physical properties listed above are presented as typical average values as determined
by accepted ASTM test methods and are subject to normal manufacturing variation.
•
....
• •
....
... •
..
NOA No.: 06-0201.02
Expiration Date: 05/10/11
Approval Date: 04 /13/06
Page 2 of 7
EVIDENCE SUBMITTED:
Test Agency Test Identifier Test Name/Report Date
Center for Applied Engineering #94 -060 TAS 101 04/08/94
257818 -IPA TAS 101 12/16/96
25- 7438 -3 SSTD 11 -93 10/25/95
25-7438-4
25- 7438 -7 SSTD 11 -93 11/02/95
25-7492 SSTD 11 -93 12/12/95
Miles Laboratories NB- 589 -631 ASTM D 1623 02/01/94
Polymers Division
Ramtech Laboratories, Inc. 9637 -92 ASTM E 108 04/30/93
Southwest Research Institute 01- 6743 -011 ASTM E 108 11/16/94
01- 6739- 062b[1] ASTM E 84 01/16/95
Trinity Engineering 7050.02.96 -1 TAS 114 03/14/96
Celotex Corp. Testing Services 528454-2 -1 TAS 101 10/23/98
528454 -9 -1
528454-10 -1
520109 -1 TAS 101 12/28/98 • • • •.
520109 -2 • •••• • • 520109 -3 • • • • • •
•
•
520109 -6 •
520109 -7 •
520191 -1 TAS 101 °•••0•34102199.••••• •••� ••••
520109 -2 -1 • • •
• • . . •
•• .• ••••
LIMITATIONS:
• • .
• •••• •
• 1. Fire classification is not part of this acceptance. Refer to the Prepared Roof Tile Aint ty for VD: .6 .
rating. • •
2. Polypro® AH 160 shall solely be used with flat, low, & high tile profiles.
3. Minimum underlayment shall be in compliance with the Roofing Application Standard RAS 120.
4. Roof Tile manufactures acquiring acceptance for the use of Polypro® AH160 roof tile adhesive with
their tile assemblies shall test in accordance with TAS 101.
5. Roof Tile manufactures acquiring acceptance for the use of HANDI STICK roof tile adhesive with
their tile assemblies shall test in accordance with TAS 101 with section 10.4 as modified herein.
/
tg
\2
MS
•
NOA No.: 06-0201.02
Expiration Date: 05 /10/11
Approval Date: 04 /13/06
Page 3 of 7
•
• •
• •
• •
Table 1: Adhesive Placement For Each Generic Tile Profiles . • • •
Tile Profile
Placement
Detail
Single Paddy
Weight Min.
(grams)
Two Paddr•Weight
per paddy Min. •
(gt'an"
Flat, Low, High Profiles
#1
35
NrA
High Profile (2 Piece
Barrel)
#1
17 /side on cap and
34 /pan
N/A
Flat, Low, High Profiles
#2
24
N/A
Flat, Low, High Profiles
#3
8
INSTALLATION:
1. Polypro® AH160 may be used with any roof tile assembly having a current NOA that lists uplift
resistance values with the use of Polypro® AH160.
2. Polypro® AH 160 shall be applied in compliance with the Component Application section and the
corresponding Placement Details noted herein. The roof tile assembly's adhesive attachment with
the use of Polypro® A11160 shall provide sufficient attachment resistance, expressed as an uplift
based system, to meet or exceed the uplift resistance determined in compliance with Miami -Dade
County Roofing Application Standards RAS 127. The adhesive attachment data is noted in the roof
tile assembly NOA
3. Polypro® AH160 roof tile adhesive and its components shall be installed in accordance with
Roofing Application Standard RAS 120, and Polyfoam Products, Inc. Polypro® AH160 Operating
Instruction and Maintenance Booklet.
4. Installation must be by a Factory Trained 'Qualified Applicator' approved and licensed by Polyfoam
Products, Inc. Polyfoam Products Inc. shall supply a list of approved applicators to the authority
having jurisdiction.
5. Calibration of the Foampro® dispensing equipment is required before application of any adhesive.
The mix ratio between the "A" component and the "B" component shall be maintained between 1.0-
1.15 (A): 1.0 (B). The dispense timer shall be set to deliver 0.0175 to 0.15 pounds per tile as
determined at calibration. No other settings shall be approved.
6.
Polypm® AH160 shall be applied with Foampro RTF1000 or ProPack® 30 & 100 dispensing
equipment only.
7. Polypro® AH160 shall not be exposed permanently to sunlight. ••••
•
S. Tiles must be adhered in freshly applied adhesive. Tile must be set within 2 to 3 min after • • • • •
n
Polypro® A11160 has been dispensed
9. Polypro® A11160 placement and minimum patty weight shall be in accordance wilt ?lacement •
Details' herein. Each generic tile profile requires the specific placement noted hereip • •
••••
• •
.. •
• •••
LABELING:
All Polypro® AH 160 containers shall comply with the Standard Conditions listed herein.
BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or applicable building code in order to properly evaluate the
installation of this system.
•• • • •
•
.
NOA No.: 06- 0201.02
Expiration Date: 05/10/11
Approval Date: 04 /13/06
Page 4 of 7
.•
ADHESIVE PLACEMENT DETAIL 1
SINGLE PATTY
1)Plensenougbadheshe touiire17 e
squaw lochs is what panlge � a
Tam eons upsidedown. n.P adhesive 112tn.
� .
edgeofco wtie. � ,
Then IBM the tit
' �/
NOA No.: O6-0201.02
Expiration Date: 05/10/11
Approval Date: 04/13/06
Page 5 of 7
•
•
•
• •
• •
•
•
ADHESIVE PLACEMENT DETAIL 2
SINGLE PA'T'TY
•
•
•
• •
•
• e
• •••• � � •••• • •
•• •flfl• •....
• •
• • • flee ••
•• •• ••••
0
• ..
'
•
• 0
• • •••• • •
• • •
.. • • • • • 0
.•
NOA No.: 06- 0201.02
Expiration Date: 05/10/11
Approval Date: 04/13/06
Page 6 of 7
ADHESIVE PLACEMENT DETAIL 3
DOUBLE PATTY
END OF THIS ACCEPTANCE
0000..
•
:000:0
•
•
• • •
•••• 0000 • •
.... ....
0000.. • • .. • •
• • •• •
.. .. ow 0000..
•
• •• •
• •
. me .
• 0000 • •
• •• 0000..
.. • ... • • •
NOA No.: 06- 0201.02
Expiration Date: 05/10/11
Approval Date: 04 /13/06
Page 7 of 7
MIAM DE
BUILDING CODE COMPLIANCE OFFICEi(Btdt •
PRODUCT CONTROL DIVISION • • •
• ••
e.
Ilit JAN 1 1 2001 ki
B /kV
beiltg issug4 under the applicable rules and regulations governing the use of construction
materials. The documentation submitted has been reviewed by Miami -Dade County Product Control
Division and accepted by the Board of Rules and Appeals (BORA) to be used in Miami Dade County
and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product
Control Division (In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County)
reserve the right to have this product or material tested for quality assurance purposes. If this product or
material fails to perform in the accepted manner, the manufacturer will incur the expense of such testing
and the AHJ may immediately revoke, modify, or suspend the use of such product or material within
their jurisdiction. BORA reserves the right to revoke this acceptance, if it is determined by Miami -Dade
County Product Control Division that this product or material fails to meet the requirements of the
applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building
Code, including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Polystick P, Basik, IR/IRX, TU, TU Plus and MU Underlayments
• • •.• •
• • • • • • •
• • • • • •
• • • • • • •
• • • • • • •
• • •• • • •
•• • • • •• ••• ••
•
• •
•
• •
• •
.. .
• •
• •
• •
•• • •••
•
• • • . • •
• • • ••
• • •••
• • • • •
• • • •
• • •
• • •
• • •••
MIAMI -DADE COUNTY, FLORIDA
• • IaTRO -DADE FLAGLER BUILDING
• CIO3WESI FLAGLER STREET, SUITE 1603
MIAMI, FLORIDA 33130 -1563
• • (305) 375 -2901 FAX (305) 375 -2908
• •
• •
• •
••• ••
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state
and following statement: "Miami -Dade County Product Control Approved ", unless otherwise noted
herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has
been no change in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or
change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an
endorsement of any product, for sales, advertising or any other purposes shall automatically terminate
this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of
NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and
followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is
displayed, then it shall be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Official.
This NOA revises NOA No. 06- 0424.03 and consists of pages 1 through 6.
The submitted documentation was reviewed by Jorge L. Acebo.
NOA No 06- 0505.01
Expiration Date: 09/13/11
Approval Date: 11/30/06
Page 1 of 6
• • ••• • • •••
•• •• • • • • •• • •
• • • • • • • • • • • • • •
• • • ••• • •
• • • • • • •
• • ••• • • • •••
ROOFING COMPONENT APPROVAL • • • • • •
• • .. •• •• • • • •
• • • • • • • • • •
Cateeorv: Roofing. • •• • •• • ••• ••• • •
Sub- Cateeorv: Underlayment
Material: SBS , APP Self- Adhering Modified Bitumen
PRODUCTS DESCRIPTION:
•
•• • • • •• ••• ••
• • • • •
• •
•
•• • • • • • • ••
Test Product
Product Dimensions Sneciflcation Description
Polystick P Roll: ASTM D 1970 A polyethylene top surface, self- adhering,
underlayment 75' x 3' SBS polymer modified bituminous sheet
40 mils thick material for use as an underlayment in
sloped roof assemblies. Designed as an
ice & ram shield.
Polystick Basik Roll: ASTM D 1970 A homogeneous, rubberized asphalt
underlayment 65'8" x 3'3 waterproofing membrane, glass fiber
60 mils thick reinforced with polyolefinic filin on the
upper surface for use an underlayment for
metal roofing.
Polystick IR/IRX Roll: TAS 103 and A fine granular /sand top surface self -
underlayment 65'8" x 3'3 ASTM D 1970 adhering, APP polymer modified,
80 mils thick fiberglass reinforced, bituminous sheet
material for use as an underlayment in
sloped roof assemblies. Designed as an
ice & rain shield and as a flat roof file
underlayment.
Polystick TU Roll: TAS 103 and A heavy granuled surface self adhering,
underlayment 32'10" x 3'3 ASTM D 1970 APP polymer modified, fiberglass or
100 mils thick polyester reinforced, bituminous sheet
material for use as an ' underlayment in
sloped roof assemblies. Designed as a a
roof tile underlayment.
Polystick TU Plus Roll: TAS 103 and A non - wicking fabric surfaced, self -
underlayment 65'8" x 3'3)/ ASTM D 1970 adhering, APP polymer modified,
(Facer of Membrane 80 mils thick fiberglass reinforced with a high strength
Labeled in Orange polyester fabric, bituminous sheet material
or Black Ink) for use an an underlayment in sloped roof
assemblies. Designed as a metal roofmg
and roof tile underlayment.
Polystick MU Roll: TAS 103 and A non - wicking fabric surfaced, self -
underlayment 65'8" x 3'3- ASTM D 1970 adhering, APP polymer modified,
80 mils thick fiberglass reinforced, bituminous sheet
material for use an an underlayment in
sloped roof assemblies. Designed as a
metal roofing and roof tile underlayment.
NOA No 06-0505.01
Expiration Date: 09 /13/11
Approval Date: 11/30/06
Page 2 of 6
• • ... .
.. .. • • •
• • • • • •
• • • • • •
• • • • • •
• • ••• • •
EVIDENCE SUBMITTED:
Test Asencv Test Identifier •
Exterior Research & Design, LLC #1 ;7;6.1)1301-1 .
#11756.08.01 -1
#0220208.05
PRI Asphalt Technologies P101 1 S 1
PUSA- 045- 12:01:
PUSA18 -5201 •
PUSA - 035 -02-01
PUSA -033 -02 -01
INSTALLATION PROCEDURES:
Deck Type 1:
Base Sheet:
Fastening:
Membrane:
Surfacing:
• • •..
• • • • •
• • • •
• • •
• • •
• • •. •
• Test Name - enort
• ::.
• ?QS >'03
ASTM D 1970
TAS 103
•• ••• ••
tWM p 4977
• ASTM 114977
1 • AStvf b 2523
TAS 103
ASTM D 1970
Date
04/27/01
08/14/01
08/29/05
04/08/02
01/31/02
07/14/03
09/29/06
01/12/06
Wood, non - insulated, new construction
One or more plies of ASTM D 226 Type II or ASTM D 2626 or Polyprotector UDL or
Polyprotector UDL AS.
Nails and tin caps 12" grid, 6" o.c. at laps. (for base sheet only)
Polystick membranes self-adhered.
None
1. All nails in the deck shall be carefully checked for protruding heads. Re- fasten any loose decking
panels, and sweep the deck thoroughly to remove any dust and debris prior to application.
2. Place the underlayment over metal drip edge in accordance with RAS 111.
3. Place the first course of membrane parallel to the eave, rolling the membrane to obtain maximum
contact. Remove the release film as the membrane is applied. . All side laps shall be a minimum
of 3 -W' and end laps shall be a minimum of 6." Roll the membrane into place after removing the
release strip. Vertical strapping of the roof with Polystick is acceptable. Membrane shall be back
nailed in accordance with applicable building code.
4. When applying the membrane in the valley, start at the low point and work to the high point,
rolling the membrane from the center outward in both directions.
5. For ridge applications, center the membrane and roll from the center outward in both directions.
6. Roll or broom the entire membrane surface so as to have full contact with the surface, giving
special attention to lap areas. Polystick TU and TU Plus shall not be left exposed as a temporary
roof for longer than 180 days after application. Polyglass reserves the right to revise or alter
product exposure times; not to exceed the preceeding maximum time limitations.
7. Flash vent pipes, stacks, chimneys and penetrations in compliance with Roof Assembly current
Product Control Notice of Acceptance.
8. All protrusions or drains shall be initially taped with a 6" piece of underlayment. The flashing
tape shall be pressed in place and formed around the protrusion to ensure a tight fit. A second
layer of Polystick shall be applied over the underlayment.
NOA No 06. 0505.01
Expiration Date: 09/13/11
Approval Date: 11/30/06
Page 3 of 6
Tile Profile
Polystick IR/IRX
Polystick MU
Polystick TU, TU Plus
Flat Tile
5:12
No limitation
No limitation
Profiled Tile
Prohibited
5:12
No limitation
•
.• •
• •
•
•
•
•.. • •
•
• • •
• .•.
• • • •
. •• • • •
• • ..
• • •
• • •
• •
• •
• •••
• • • •••
• • • •. •. • • •
GENERAL LI TrArrIONS: : ' • • • • • • • •
• • • • • • • • •
• 1. Fire classification is not part of this acceptance. • • • • •
2. Polystick P, Basik and IR/IRX may be used in asphaltic shingles, wood shakes and shingles, non-
structural metal roofing, and quarrya tate o f assenbl PMyst ck P and Basil( shall not be used
as roof file underlayment. • • •
•
3. Deck requirements shall be in comptibnd vrth kppllcab48 btiliitng code.
4. Polystick membranes shall be applied to a smooth, clean and dry surface. The deck shall be free of
irregularities.
5. Polystick membranes shall not be adhered directly over a pre - existing roof membrane as a recover
system.
6. Polystick P and Basik shall not be left exposed as a temporary roof for longer than 30 days after
application. Polystick IR/IRX, or MU shall not be left exposed as a temporary roof for longer than
90 days after application. Polystick TU and TU Plus shall not be left exposed as a temporary roof
for longer than 180 days after application. Polyglass reserves the right to revise or alter product
exposure times; not to exceed the preceeding maximum time limitations.
7. All products listed herein shall have a quality assurance audit in accordance with the Florida
Building Code and Rule 9B-72 of the Florida Administrative Code.
8. In roof rile application, data for the attachment resistance of roof tiles shall be as set forth in the
roof rile manufacturer's Notice. Polystick TU, TU Plus and MU may be used in both adhesive set
and mechanically fastened roof tile applications. Polystick IR/IRX is limited to mechanically
fastened roof tile applications. The maximum roof slope for use as roof file underlayment for
(direct -to -deck) tile assemblies shall be as described below:
The above slope limitations can be exceeded only by using battens and counter battens in accordance
with the Approved Tile System Notice of Acceptance and applicable Florida Building Code
requirements.
9. Care should be taken during the loading procedure to keep foot traffic to a minimum and to avoid
dropping of tile directly on the underlayment. Refer to Polyglass Tile loading detail for loading
procedure.
6
Roofing Tiles
(6 Max. Per Stack
12
NOA No 06-0505.01
Expiration Date: 09/13/11
Approval Date: 11/30/06
Page 4of6
• • ••• • • • •••
•• •• • • • •• •• •
• • • • • • • • • •
• • • ••• • • •
• • • • • • • •
• • ••• • • • • •••
GENERAL LINIITATTIONS: (CONTINUED)
10. Refer to prepared roofing system Cpntl'1,1 N'c$ice oi:ACceptAnce for listed approval of this
product with specific prepared robtl ig 1roducts: Pobistick IR/IRX, TU, TU Plus & MU
may be used with any approved roof covering Nottce of Acceptance listing Polystick P, Basik,
IR/IRX, TU, TU Plus & MU as a component part of an assembly in the Notice of Acceptance. If
Polystick P, Basik, IR/IRX, TU, TU.PIlis&lVW itit.lisiOd, a ietluest may be made to the
Authority Having Jurisdiction (AHJ)'or tU Mai - lie rountt Product Control Department for
approval provided that appropriate docunieritafien i; piWiided to detail compatibility of the
products, wind uplift resistance, and fire testing results.
LABELING:
All membranes shall bear the imprint or identifiable marking of the manufacturer's name or logo, the
Miami -Dade County logo or the following statement: "Miami -Dade County Product Control Approved".
BUILDING PERMIT REQUIREMENTS:
Application for building permit shall be accompanied by copies of the following:
1. This Notice of Acceptance.
2. Any other documents required by the Building Official or applicable building code in order to properly
evaluate the installation of this materials.
POLYGLASS GENERAL APPLICATION GUIDELINES FOR POLYSTICK MEMBRANES:
1. Polyglass does accept the direct application of Polystick underlayment membranes to wood decks.
Installers are cautioned to refer to applicable local building codes prior to direct deck installation
to ensure this is acceptable. Please also refer to applicable Product Data Sheets of the
corresponding products.
2. All rolls, with the exception of Polystick TU Plus and Polystick MU should be back - nailed in
selvage edge seam as per Polyglass Back Nailing Guide. Nails shall be, 11 gauge ring shank type,
applied with a minimum 1" metal disk as required in Dade County or simplex type nail as
otherwise allowable in other regions, at a minimum rate of 12" o.c. Polystick TU Plus and
Polystick MU should be back nailed in designated area marked "nail area, area pare clever" on the
face of membrane, with the above stated nails and/or disks. The head lap membrane is to cover the
area being back - nailed. (Please refer to applicable local building codes prior to installation.)
3. All seal lap seams (selvage laps) must be rolled with a hand roller to ensure full contact.
4. All fabric over fabric; and granule over granule end laps, shall have a 6" wide, uniform layer of
Polyglass 2000 MB Plus trowel grade or other approved premium SBS modified trowel grade
mastic, applied in between the application of the lap. The use of mastic between the laps does not
apply to Polystick Basik.
5. A maximum of 6 tiles per stack are allowed when loading tile on the underlayments. Refer to the
Polyglass Tile Loading Guidelines.
6. Battens and/or Counter - battens, as required by the tile manufacturers NOA's, must be used on all
projects for pitch /slopes of 7"/12" or greater. It is suggested that on pitch/slopes in excess of 6
1/4"/12 ", precautions should be taken, such as the use of battens to prevent tile sliding during the
loading process.
NOA No 06- 0505.01
Expiration Date: 09 /13/11
Approval Date: 11/30/06
Page 5 of 6
• • ••• • • • •••
•• • . • • • •. •• •
• • • • • • • • • • •
• • • • • •• • • • • •
• • • • • • • • • •
• • ••• • • • • • •..
7. Minimum cure time after membrane. ins allation & before loading cf roofing tiles is Forty-Eight
(48) Hours. • • • • • • • • • • • • • • • • • •
• • • • • .
8. Polystick TU Plus, Polystick MU may to be ttstcl ie'dhy exposed application such as crickets,
exposed valleys, or exposed roof to wall details.
9. Repair of Polystick membranes is t468 atcdimffuh4/ byaglyalt Polyglass MB 2000 Plus Trowel
Grade Mastic or an approved premiumbSt •trrowei grade mastic to the area in need of
repair, followed by a patch of the Polystiek tnateriaJ41l a kin$ should be set and hand rolled in
place over the area needing such repair. Patching membrane shall be a minimum of 6 inches in
either direction. The repair should be installed in such a way so that water will run parallel to or
over the top of all laps of the patch.
10. All self - adhered membranes must be rolled to ensure full contact with approved substrates.
Polyglass requires a minimum of 40 lbs for a weighted roller for the rolling of the field membrane.
Hand rollers are acceptable for rolling of patches or small areas of the roof.
11. All approved substrates should be dry, clean and properly prepared, before any application of
Polystick membranes commences. An approved substrate technical bulletin can be furnished upon
request. It is recommended to refer to applicable building codes prior to installation to verify
acceptable substrates.
12. The Polyglass Miami Dade Notice of Acceptance (NOA) approval for Polystick membranes and
PolyProtector UDL can be furnished upon request by our Technical Services Department by
calling 1 (800) 894 -4563.
13. Polyglass offers a 10 year Limited Material Warranty on all properly installed Polystick self -
adhered underlayments. Warranty must be requested and registered by Polyglass to be in force.
14. Questions in regards to the application of Polyglass products should be directed to our Technical
Services Department at 1(800) 894 -4563.
15. Polyglass recommends that applicators follow good roofing practices and applicable procedures as
outlined by the National Roofing Contractors Association (NRCA).
PLEASE CHECK WITH LOCAL BUILDING CODES REGARDING LIMITATIONS OF
SPECIFIC APPLICATIONS. LOCAL CODES MAY SUPERSEDE POLYGLASS
REQUIREMENTS AND RECOMMENDATIONS.
END OF THIS ACCEPTANCE
NOA No 06- 0505.01
Expiration Date: 09 /13/11
Approval Date: 11/30/06
Page 6 of 6