The URL can be used to link to this page

RF-11-20-2575, 9045 Biscayne BlvdMiami Shores Village 10050 NE 2 Ave Miami Shores Fl- 33138 305-795-2204 Location Address Parcel Number 9045 BISCAYNE BLVD, Miami Shores, FL 33138 1132060110051 Contacts SHORE SQUARE PRRPERTIES LLC Owner CAYE WORKS, CORP Applicant SHORE SQUARE PROPERTIES LLC EDGAR MEDINA 696 NE 125 ST, MIAMI, FL 33161 10750 NW 138 ST UNIT 2, HIALEAH GARDENS, FL 33018 Other: 3057798040 info@cayeworks.com CAYE WORKS, CORP Contractor EDGAR MEDINA 10750 NW 138 ST UNIT 2, HIALEAH GARDENS, FL 33018 info@cayeworks.com Description: MANSARD ROOF REPAIR Valuation: $ Inspection Requests 2,000.00 Ins TotalSq Feet: 200.00 Fees Amount Application Fee - Other $50.00 CCF $1.20 DBPR Fee $3.75 DCA Fee $2.50 Education Surcharge $0.40 Roofing Fee $50.00 Technology Fee $6.25 Total: $114.10 Payments Date Paid Amt Paid Total Fees $114.10 Credit Card 11/16/2020 $50.00 Credit Card 01/08/2021 $64.10 Amount Due: $0.00 Building Department Copy In consideration of the issuance to me of this permit, I agree to perform the work covered hereunder in compliance with all ordinances and regulations pertaining thereto and in strict conformity with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village. In accepting this permit I assume responsibility for all work done by either myself, my agent, servants, or employes. I understand that separate permits are required for ELECTRICAL, PLUMBING, MECHANICAL, WINDOWS, DOORS, ROOFING and SWIMMING POOL work. OWNERS AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws regulating construction and zoning. Futhermore, I authorize the above named contra'titor to dp ttge work s ted. /-V Authorized Signature: Owner / Applicant / Contractor Date January 08, 2021 Page 2 of 2 Miami Shores Village 10050 NE 2 Ave Miami Shores FL 33138 305-795-2204 Location Address Parcel Number 9045 BISCAYNE BLVD, Miami Shores, FL 33138 1132060110051 Contacts SHORE SQUARE PORPERTIES LLC Owner CAYE WORKS, CORP Applicant SHORE SQUARE PROPERTIES LLC EDGAR MEDINA 696 NE 125 ST, MIAMI, FL 33161 10750 NW 138 ST UNIT 2, HIALEAH GARDENS, FL 33018 Other: 3057798040 info@cayeworks.com CAYE WORKS, CORP Contractor EDGAR MEDINA 10750 NW 138 ST UNIT 2, HIALEAH GARDENS, FL 33018 info@cayeworks.com ® Inspection Requests: Description: MANSARD ROOF REPAIR Valuation: $ 2,000.00 6 Total Scl Feet: 200.00 h Fees Amount Application Fee - Other $50.00 CCF $1.20 DBPR Fee $3.75 DCA Fee $2.50 Education Surcharge $0.40 Roofing Fee $50.00 Technology Fee $6.25 Tota I : $114.10 Applicant Copy Payments Date Paid Amt Paid Total Fees $114.10 Credit Card 11/16/2020 $50.00 Credit Card 01/08/2021 $64.10 Amount Due: $0.00 For Inspections, Call (305) 762-4949 or Log on at https://bldg.miamishoresvillage.com/cap/. Requests must be received by 3pm for following day inspections. NOTICE: In addition to the requirements of this permit, there may be AND THERE MAY BE ADDITIONAL PERMITS REQUIRED FROM OTHER additional restrictions applicable to this property that maybe found in the GOVERNMENTAL ENTITIES SUCH AS WATER MANAGEMENT DISTRICTS, public records of this county. STATE AGENCIES, OR FEDERAL AGENCIES. January 08, 2021 Page 1 of 2 BUILDING PERMIT APPLICATION F BUILDING 7 ELECTRIC Miami Shores Village Building Department C2 10050 N.E.2nd Avenue, Miami Shores, Florida 33138 Tel: (305) 795-2204 Fax: (305) 756-8972 2020 13 y• l' (A�V_a_ INSPECTION LINE PHONE NUMBER: l3051 76Z-4949 1' FBC 20 Master Permit No.7v—F— 1 -45 Sub Permit No. �z ROOFING ❑F-1 ❑REVISION F� EXTENSION ®RENEWAL ;PLUMBING 7MECHANICAL 'PUBLICWORKS � CHANGE OF ❑ CANCELLATION SHOP CONTRACTOR DRAWINGS JOB ADDRESS: L) City: Miami Shores County: Miami Dade Zip: Folio/Parcel#: 0 Is the Building Historically Designated: Yes N 0 Occupancy Type: Load: Construction Type: Flood Zone: BFE: FFE: OWNER: Name (Fee Simple Titleholder): �Mo& �QLo�11* Ou—c-L�4,17 L-LC-- Phone#: 3,9 to Address, ("� If {�— Wf City: P p Rri LA ti �4 " j State: Tenant/Lessee Name: Phone#: : 3 1311* / & I — Email: CONTRACTOR: Company Name: Phone # -Sly Address: 'o- City State: 1 Zip: Qualifier Name: F-v � C7, /Vi- T ".. l Phone#: L Z 3 State Certification or Registration Certificate of Competency #: DESIGNER: Architect/Engineer: -Phone#: Address: City: State: zip: Value of Work for this Permit: $_ Poor, Square/Linear Footage of Work: 4?60 Type of Work: F-1 Addition 1-1 Alteration 7, New Repair/Replace ❑ Demolition Description of Work: Koa-E Specify color of color thru tile: Submittal Fee $ Permit Fee $ CCF $ CO/CC $ Scanning Fee $ Radon Fee $ DBPR $ Notary $ Tprh Tral nine /Education ree 4 Double Fee .nology Fee $ Structural Reviews Bond $ TOTAL FEE NOW DUE (Revised02/24/2014) Bonding Company's Name (if applicable) Bonding Company's Address City — State Mortgage Lender's Name (if applicable) _ Mortgage Lender's Address City State Zip Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRIC, PLUMBING, SIGNS, POOLS, -cc 13011ERS, HEATERS, TANKS, AIR CON'DITiONERS, ETC... F UR;N A le L �, U 10 L. I ^I r R.� OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws regulating construction and zoning. "WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.'" Notice to Applicant.- As a condition to the issuance of a building permit with an estimated vabie e-Yceeding $2,56n the applicant Must promise in good faith that a copy of the nqWe of commencement and construction lien low brochure will be delivered to the person whose property is subject to attachrn;en Also, a certified copy of the recorded notice of commencement must be posted at the job site for the first inspection which ocW) seven 17) days after the building permit is issued. in the absence of such posted notice, the A I inspection will not be approved a� reinspection fee will be charged. J Signature or AGENT Signature CONTRACTOR The foregoing instrumer# "4a�, acknowledged before me this The foregoing instrument was acknowledged before me this day of 11A V7, 20. by day Of n /L who isfe'—r—so-nally knov4Q to � A who i4ersonally known tom me or who has produced as me or who has produced as identification and who did take an oath, NOTARY PUBLIC: Print: i ANK')RW,0SEri WHEEdR zl "'0 Cemm,;ssion # 05110925 Seat: 21 th,�YUq, N 6t;tr& Not,1 kv% identification and who did take an oath. NOTARY PUBLIC: Sign:_ Print: ND"ary P�n 11 - State of Fi&da Mi 'bimm, &Pes.,ufi 1, 2,02' : �o trnug' Nafi-rm, Air. APPROVED BY Plans Examiner Zoning Structural Review Clerk (Revised02124/2014) f Summary Report Property Information Folio: 11-3206-011-0051 Property Address: 19031 BISCAYNE 13LVD Miami Shores, FL 33138-3221 Owner SHORE SQUARE PROPERTIES LLC Mailing Address 696 NE 125 ST MIAMI, FL 33161 USA PA Primary Zone 6200 COMMERCIAL - ARTERIAL Primary Land Use 1611 COMMUNITY SHOPPING CENTER: RETAIL OUTLET Beds / Baths / Half 1 0 / 0 / 0 Floors 1 Living Units 0 Actual Area 41,619 Sq.Ft Living Area 41,619 Sq.Ft Adjusted Area 38,148 Sq.Ft Lot Size 126,728 Sq.Ft Year Built 11962 Assessment Information Year 2020 2019 2018 Land Value $5,576,032 $5,576,032 $4,739,627 Building Value $567,968 $146,168 $785,353 XF Value $0 $0 $0 Market Value $6,144,000 $5,722,200 $5,524,980 Assessed Value $6,144,000 $5,722,200 $5,524,980 Benefits Information Benefit Type 2020 2019 2018 Note: Not all benefits are applicable to all Taxable Values (i.e. County, School Board, City, Regional). Short Legal Description 6 53 42 ASBURY PARK PB 4-110 BEG 30FTW OF SE CDR LOT 5 RUN W272.08FT N177FT W260.97FT TO E R/W/L BISC BLVD NELY139.58FT Generated On : 11/16/2020 Taxable Value Information 2020 20191 2018 County Exemption Value $0 $0 $0 Taxable Value $6,144,000 $5,722,200 $5,524,980 School Board Exemption Value $0 $0 $0 Taxable Value $6,144,000 $5,722,200 $5,524,980 City Exemption Value $0 $0 $0 Taxable Value $6,144,000 $5,722,200 $5,524,980 Regional Exemption Value $0 $0 $0 Taxable Value $6,144,000 $5,722,200 $5,524,980 Sales Information Previous OR Book - Price Qualification Description Sale Page 27902- Not exposed to open -market; atypical 11/07/2011 $8,000,000 4847 motivation 24432- Sales which are disqualified as a result 11/01/2005 $0 4515 of examination of the deed 23079- Sales which are disqualified as a result 02/01/2005 $0 3255 of examination of the deed 12153- Deeds that include more than one 09/01/1985 $1,850,000 1995 parcel The Office of the Property Appraiser is continually editing and updating the tax roll. This website may not reflect the most current information on record. The Property Appraiser and Miami -Dade County assumes no liability, see full disclaimer and User Agreement at http://www.miamidade.gov/info/disclaimer.asp Version: Florida Department of State Department of State / Division of Corporations / Search Records / Search by Entity Name / Detail by Entity Name Florida Limited Liability Company SHORE SQUARE PROPERTIES, LLC Filing Information Document Number L11000075982 FEI/EIN Number 45-2672348 Date Filed 06/30/2011 Effective Date 06/28/2011 State FL Status ACTIVE Principal Address 696 NE 125TH STREET NORTH MIAMI, FL 33161 Mailing Address 696 NE 125TH STREET NORTH MIAMI, FL 33161 Registered Agent Name & Address Reyes, Daisy 696 NE 125TH STREET NORTH MIAMI, FL 33161 Name Changed: 03/20/2014 Authorized Person(s) Detail Name & Address Title MGR IZHAK, YORAM 696 NE 125TH STREET NORTH MIAMI, FL 33161 Title MGR LIPTON, ALAN 649 OCEAN BLVD GOLDEN BEACH, FL 33160 Annual Reports Report Year Filed Date DIVISION OF CORPORAT:ONS 2018 01/15/2018 2019 02/12/2019 Document Images 011117/2020 --ANNUAL REPORT 02M 2/2019 --ANNUAL REPORT 01/1 5Q0118 -ANNUAL REPORT 01/13/2017 --ANNUAL. REPORT OWI 7/2016 ANNUAL REPORT 03,'31!2015 ANNUAL REPORT 23120/2014 ANNUAL REPORT 04/04i2013 ANNUAL REPORT NOREs lit it FryrE 5• FZO RIDP- PERMIT ADDRESS APPLICATION DATE EXPIRATION DATE: CONTACTS Applicant 9045 BISCAYNE BLVD PARCEL: 1132060110051 Miami Shores, FL 33138 11/09/2020 SQUARE FEET: 200.00 DESCRIPTION: MANSARD ROOF REPAIR 05/08/2021 VALUATION: $2,000.00 NAME COMPANY ADDRESS EDGAR MEDINA CAYE WORKS, CORP 10750 NW 138 ST, UNIT 2 HIALEAH GARDENS. FL 33018 Contractor EDGAR MEDINA CAYE WORKS, CORP 10750 NW 138 ST, UNIT 2 HIALEAH GARDENS, FL 33018 Owner SHORE SQUARE PROPERTIE SHORE SQUARE PORPERTIES LLC 696 NE 125 ST LLC MIAMI, FL 33161 SHORE SQUARE PROPERTIE SHORE SQUARE PORPERTIES LLC 696 125 ST LLC MIAMI, FL 33161 REVIEW ITEM STATUS REVIEWER Building v.1 Requires Re -submit Ismael Naranjo email: bo@msvfl.gov Review item used to allow building to comment during a plan review Correction: General - Ismael Naranjo (11 /18/20) -Not Resolved Comments: 11 /18/2020 Provide roof package with details and specifications for the roof. Please make sure to reflect the work area and provide area calculations. Corrective Action: Provide roof package with details and specifications for the roof. Please make sure to reflect the work area and provide area calculations. Building v.2 Requires Re -submit Ismael Naranjo email: bo@msvfl.gov Review item used to allow building to comment during a plan review Correction: General - Ismael Naranjo (11 /25/20) - Not Resolved Comments: Please comply with previous rejection comments. 11 /18/2020 Provide roof package with details and specifications for the roof. Please make sure to reflect the work area and provide area calculations. Information should be clear and legible as per section 107.2 of the 2017 FBC, Building. 1521.4 Not more than 25 percent of the total roof area or roof section of any existing building or structure shall be repaired, replaced or recovered in any 12-month period unless the entire existing roofing system or roof section is replaced to conform to requirements of this code. If the roof area being repair is greater than 160 sq. Ft. Please provide DERM asbestos section approval. 105.3.1 December 03, 2020 10050 NE 2 Ave Miami Shores FL 33138 Page 1 of 1 n M 1®D�ADE MIAMI-DADE COUNTY � PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 T (786) 315-2590 F (786) 315-2599 NOTICE OF ACCEPTANCE (NOA) www.miamidade.¢ov/economy Polyglass USA Inc. 1111 W. Newport Center Drive Deerfield Beach, FL 33442 SCOPE: This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be used in Miami -Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ). This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section (in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reserve the right to have this product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately rgvoke, ijtodt" or suspend the use of such product or material within their jurisdiction. RER reserves the righl.W*rctoke tW agceptance, • if it is determined by Miami -Dade County Product Control Section that this product or materi6 fails to feet the requirements of the applicable building code. .."• • 0• This product is approved as described herein, and has been designed to comply with the F141'idI %uildinL1;g6V • including the High Velocity Hurricane Zone of the Florida Building Code. ' ...... ... . ..... .. .. .. ...... DESCRIPTION: Polyglass Polystick Underlayments • • . . .. . ...... LABELING: Each unit shall bear a permanent label with the manufacturer's name or logvp, citJ•,� tate and hollowing • • statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein' • 0 • • • • 0 0• .... RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product. TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of NOA. ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done in its entirety. INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official. This NOA renews and revises NOA No.15-0410.04 and consists of pages 1 through 8. The submitted documentation was reviewed by Freddy Semino., NOA No.: 17-0614.22 MLOWMADE COUla Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 1 of 8 ROOFING COMPONENT APPROVAL Category: Roofing Sub -Category: Underlayment Material: SBS , APP Self -Adhering Modified Bitumen PRODUCTS DESCRIPTION: Test Product Product Dimensions Specification Description Polystick IR-Xe 65' x 3'33/8" ASTM D 1970 A fine granular/sand top surface self -adhering, APP Manufacturing Or 65' x 3' polymer modified, fiberglass reinforced, bituminous Location #1 & #2 60 mils thick sheet material for use as an underlayment in sloped roof assemblies. Designed as an ice & rain shield. Polystick Dual Pro 61' x 3'3 3/8" TAS 103 and A rubberized asphalt self -adhering, glass-fiber/polyester Manufacturing 60 mils thick ASTM D 1970 reinforced waterproofing membrane. Designed as a Location #2 metal roofing and roof tile underlayment. Polystick Tile Pro 61' x 3'33/8" TAS 103 and A rubberized asphalt self -adhering, glass :'bE°'tVblyestp; • 0 0 0 Manufacturing 60 mils thick ASTM D 1970 reinforced waterproofing membrane. Designed. �s a metal. • Location #2 roofing and roof tile underlaVMrt • • • ...... Polystick TU Max 65'8" x 3'3-3/8" einforcV • • •; TAS 103 and A rubberized asphalt self-adhoriag, polyester Manufacturing 60 mils thick r ASTM D 1970 waterproofing membrane. Designed as a W roortile .. a .. • Location #1 & #2 underlayment. •••••• ••• ••••• • Polystick TU P 32'10" x 3'33/s" .. .. .. ...... TAS 103 and A rubberized asphalt waterpxraffnj membrane, glass- .' Manufacturing 130 mils thick ASTM D 1970 fiber/polyester reinforced, with a granular -surf-ace • • •.:. Location #2 designed for use as a tile roof urtftlayment. • • • Polystick TU Plus 65' x 3'33/8" TAS 103 and A rubberized asphalt self -adhering, glass-fb*4J olyester (Surface Printing) 80 mils thick ASTM D 1970 reinforced waterproofing membrane. Designed as a metal Manufacturing roofing and roof tile underlayment. Location # 1 & #2 Polystick MTS 6518" x 3133/8" TAS 103 A homogeneous, rubberized asphalt waterproofing Manufacturing 60 mils thick membrane, glass fiber reinforced with polyolefinic film Location #2 on the upper surface for use as an underlayment for metal roofing, roof tile, slate tiles and shingle underlayment. Polystick MTS Plus 658" x 3'33/8" TAS 103 A homogeneous, rubberized asphalt waterproofing Manufacturing 60 mils thick membrane, glass fiber reinforced with polyolefinic film Location #2 on the upper surface for use as an underlayment for metal roofing, roof tile, slate tiles and shingle underlayment. Elastoflex S6 G 32'10" x 3'3 %" TAS 103 and Polyester reinforced, SBS modified bitumen membrane Manufacturing ASTM D 6164 with a sanded back face and a granule top surface. For Location #2 use in roof tile underlayment systems. NOA No.: 17-0614.22 Muvhtior�De couNn Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 2 of 8 MANUFACTURING PLANTS: 1. Hazelton, PA 2. Winter Haven, FL EVIDENCE SUBMITTED Test Agency Test Identifier Test Name/Report Date Trinity I ERD P10870.09.08-R1 TAS 103 12/04/08 P10870.04.09 TAS 103/ASTM D4798 & G155 04/13/09 P33360.06.10 ASTM D1970 07/01/10 P33370.03.11 TAS 103 03/02/11 P33370.04.11 ASTM D 1623 04/26/11 P36900.09.11 TAS 103/ASTM D4798 & G 15 5 09/01/11 P37300.10.11 TAS 110/ASTM D4798 & D1970 10/19/11 P40390.08.12-2 ASTM D 1623 08/07/12 P37590.07.13-1 ASTM D6164 07/02/13 P45270.05.14 TAS 103, TAS 110 & ASTM D1623 05/12/14 P46520.10.14 ASTM D1623 1Q/03/14 P44360.10.14 TAS 103 & TAS I W • : *PY/07/14 ...... P43290.10.14 ASTM D 1970 & TAS 44a •• 10✓17/14 .' PLYG-SC 10130.06.16-3 TAS 103 & TAS I M • ; • • *06%27/16 .... :. PLYG-10130.06.16-1 ASTM D 1970 & TAS" t tQ *' (16/27/16 :.... PRI Asphalt Technologies PUSA-035-02-01 0000 TAS 103 0000 0 06N/06. • • • . PUSA-055-02-02 TAS 103 ". ". . • .12r.10/07 • • : • • 0 PUSA-089-02-01 TAS 103/ASTM D4798 r(V55 07106/090 •. •; • ...... . . Momentum Technologies, Inc. JX20H7A TAS 103/ASTM D4798 & G L 5 0 &01108:0 * 0 0: RX14E8A TAS 103/ASTM D4798 01 S5 .011/09/09: • • • •; DX231)8B TAS 103/ASTM D4798 & G155 0 • • Q2718/10 DX23D8A TAS 103/ASTM D4798 & G155 02/18/10 LABELING: 1. All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or logo, city and state of manufacturing facility and the following statement: "Miami -Dade County Product Control Approved" or the Miami -Dade County Product Control Seal as shown below. BUILDING PERMIT REQUIREMENTS: Application for building permit shall be accompanied by copies of the following: 1. This Notice of Acceptance. 2. Any other documents required by the Building Official or applicable building code in order to properly evaluate the installation of this materials. NOA No.: 17-064.2 aM1AMW0%DECOUNTY 12 Expiration Date:-0612 Approval Date: 07/06/17 Page 3 of 8 INSTALLATION PROCEDURES: Deck Type 1: Wood, non -insulated Deck Description: Min. 19/32" plywood or wood plank System Type E(1): Anchor sheet mechanically fastened to deck, membrane adhered Anchor; Base Sheet: One or more plies of ASTM D 226 Type II or ASTM D 2626. Fastening: Per FBC 1518.2 & 1518.4 Nails and tin caps 12" grid, 6" o.c. at a minimum 4" head lap. (for base sheet only) Membrane: Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS or Polystick MTS Plus, self -adhered. Surfacing: See General Limitations Below. Deck Type 1: Wood, non -insulated Deck Description: Min. 19/32" plywood or wood plank System Type E(2): Anchor sheet mechanically fastened to deck, membrane adhered • Anchor/Base Sheet: One or more plies of ASTM D 226 Type II or ASTM D 2626. . • . ...... Fastening: Per FBC 1518.2 & 1518.4 Nails and tin caps 12" grid, 6" o.c. at a."viruum 4; head lap. (fpje:: • base sheet only) • • • • • • Membrane: sees sees.. Elastoflex S6 G, hot asphalt applied • • • • •. Surfacing: sees . sees. See General Limitations Below. • .. .. .. sees.. sees.. • Deck Type 1: Wood, non -insulated • • • • • • • . Deck Description: Min. 19/32" plywood or wood plank • • • • • • .. . sees s e System Type E(3): Base sheet mechanically fastened to deck, subsequent cap membrane self-adfiered. Anchor/Base Sheet: One or more plies of ASTM D 226 Type II or ASTM D 2626. Fastening: Per FBC 1518.2 & 1518.4 Nails and tin caps 12" grid, 6" o.c. at a minimum 4"head lap. (for base sheet only) Ply Sheet: Polystick MTS Plus, self -adhered with minimum 3" horizontal laps and minimum 6" vertical laps. Membrane: Polystick TU Plus, self -adhered. Surfacing: See General Limitations Below. NOA No.: 17-0614.22 MAMMADE COUNTY Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 4 of 8 INSTALLATION REQUIREMENTS: 1. All nails in the deck shall be carefully checked for protruding heads. Re -fasten any loose deck panels, and sweep the deck thoroughly to re move any dust and debris prior to application. 2. Place the underlayment over metal drip edge in accordance with RAS 111. 3. Place the first course of membrane parallel to the eave, rolling the membrane to obtain maximum contact. Remove the release film as the membrane is applied. All side laps shall be a minimum of 3" and end laps shall be a minimum of 6". Roll the membrane into place after removing the release strip. Vertical strapping of the roof with Polystick is acceptable. Membrane shall be back nailed in accordance with applicable building code. 4. When applying the membrane in the valley, start at the low point and work to the high point, rolling the membrane from the center outward in both directions. 5. For ridge applications, center the membrane and roll from the center outward in both directions. 6. Roll or broom the entire membrane surface so as to have full contact with the surface, giving special attention to lap areas. 7. Flash vent pipes, stacks, chimneys and penetrations in compliance with Roof Assembly current Product Control Notice of Acceptance. 8. All protrusions or drains shall be initially taped with a 6" piece of underlayment. The flashing tape shall be pressed in place and formed around the protrusion to ensure a tight fit. A second layer of.Polysti fk shaK be . . applied over the underlayment. + • :. • . • . ...... . .. .....• GENERAL LIMITATIONS: , • • 0.: .... : • ...... 1. Fire classification is not part of this acceptance. • • • • •.... 2. P31stick Dual Pro Polystick Tile Pro Polystick TU Plus Polystick MTS and P; •• MT§001-us;ma be • • used in asphaltic shingles, wood shakes and shingles, non-structural metal roofing, rc stems andquarry� � � • p g g � g, .Y •. slate roof assemblies. • • .. . ...... Polystick TU P may be used in all the previous assemblies listed except metal roofil1g. , •, • •+ . Polystick IR-Xe may be used in all the previous assemblies listed except metal roofir g'and roof tj? gS 4ems. • • Polystick TU Max may be used in non-structural metal roofing and roof tile systems. **of Elastoflex S6 G may be used in roof tile systems only. 3. Deck requirements shall be in compliance with applicable building code. 4. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS and Polystick MTS Plus shall be applied to a smooth, clean and dry surface. The deck shail be free of irregularities. 5. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS and Polystick MTS Plus shall not be adhered directly over a pre-existing roof membrane as a recover system. 6. Po:ysticic IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS and Polystick MTS Plus shall not be left exposed as a temporary roof for longer than the amount of days listed in the table below after application. Polyglass reserves the right to revise or alter product exposure times; not to exceed the preceeding maximum time limitations. Ex osure Limitations (Days MTS IR-Xe Elastoflex S6 G TU Plus TU P Tile Pro Dual Pro TU Max MTS Plus Winter Haven, FL 180 90 180 180 180 180 180 180 180 Hazeltc^, PA N/A 90 N/A 180 N/A N/A N/A 180 N/A 7. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and NOA No.: 17-0614.22 MAMI•DADE COUNTYM Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 5 of 8 Rule 61 G20-3 of the Florida Administrative Code. 8. In roof tile application, data for the attachment resistance of roof tiles shall be as set forth in the roof tile manufacturer's Notice of Acceptance. Polystick Tile Pro, Polystick TU Max, Polystick TU Plus or Elastoflex S6 G may be used in both adhesive set and mechanically fastened roof tile applications. I clysticl. Dual Pro is limited to mechanically fastened roof tile applications. Polystick NITS and Polystick MTS Plus are limited to mechanically fastened with the limitations outlined in Section. 9. polyst_c.k TU P may be used in mechanically fastened roof tile applications with the exception of mortar set tile applications. 9. When loading roof tiles on roof tile underlayment for (direct -to -deck) tile assemblies, the maximum roof slope shall be as follows: (See Table Below) Tile Polystick Elastoflex Polystick TU Plus, Polystick Polystick System (E3) Profile MTS S6 G TU P, Tile Pro, TU Max MTS Plus MTS Plus with Dual Pro TU Plus Flat Tile Prohibited 4:12 6:12 6:12 5:12 6:12 without battens Profiled Tile• ,without Prohibited battens 4:12 6:12 6:12 4:1,2 '. 6!1.2 10. .' �� • . . The above slope limitations can be exceeded only by using battens in accordance witl V4, pproved 'fife System Notice of Acceptance and applicable Florida Building Code requirements. When battmg"e requited, they shard••••: so*** • be utilized during loading and installation of tiles. . � • •.. � . Care should be taken during the loading procedure to keep foot traffic to a minimum j9j*J To avoid d'rSpplig of00 ' • • • • tile directly on the underlayment. Refer to Polyglass' Tile loading detail below for loarocedure two tiles ":' laid perpendicular to slope followed by a maximum four tile stack parallel to the slopt, fdr I total pf 6 files — fQ all underlayments except Polystick MTS which shall be loaded onto battens. �•� . 0 0 0 .SSoso 0 oso. SOSS NOA No.: 17-0614.22 Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 6 of 8 11. Refer to prepared roofing system Product Control Notice of Acceptance for listed approval of this product with specific prepared roofing products. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS, Polystick MTS Plus or Elastoflex S6 G may be used with any approved roof covering Notice of Acceptance listing Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS, Polystick MTS Plus or Elastoflex S6 G as a component part of an assembly in the Notice of Acceptance. If Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick 7U Pl is, Polystick MTS, Polystick MTS Plus or Elastoflex S6 G are not listed, a request may be made to the Authority Having Jurisdiction (AHJ) or the Miami -Dade County Product Control Section for approval provided that appropriate documentation is provided to detail compatibility of the products, wind uplift resistance, and fire testing results. O , YGLASS GENERAL APPLICATION GUIDELINES FOR POLYSTIC.- *MBMJPS • • •„� PL S CHECI£ WITH LOCAL BUILDING CODES REGARDING LIMITATIONS OF SPFC.WJC APPLICATIONS.;" LOCAL CODES MAY SUPERSEDE POLYGLASS REQUIREMENTS AND REC04M E4DATIONS • • • • • • • 1. Polyglass does accept the direct application of Polystick underlayment membranes td OM decks. Instillers ate";' cautioned to refer to applicable local building codes prior to direct deck installation t4 erasure this is acc eptable.• • * - • Please also refer to applicable Product Data Sheets of the corresponding products.00 • 2. All rolls, with the exception of Polystick TU Plus should be back -nailed in selvage edge senm as per Polyglass 0 • • 0 Back Nailing Guide. Nails shall be, 11 gauge ring shank type, applied with a minimum 1 V metardtic as required in Miami -Dade County or simplex type nail as otherwise allowable in other regions, at a minimum rate of 12" o.c. Polystick TU Plus should be back nailed in designated area marked "nail area, area para clavar" on the face of membrane, with the above stated nails and/or disks. The head lap membrane is to cover the area being back -nailed. (Please refer to applicable local building codes prior to installation.) 3. All seal lap seams (selvage laps) must be rolled with a hand roller to ensure full contact. 4. All fabric over fabric; and granule over granule end laps, shall have a 6" wide, uniform layer of Polyglass Polyplus 55 Premium Modified Flashing Cement, Polyglass Polyplus 50 Premium MB Flashing Cement, XtraFlex 50 Premium Modified Wet/Dry Cement, Polyglass PG500 MB Flashing Cement, applied in between the application of the lap. The use of mastic between the laps does not apply to Polystick MTS. 5. A maximum of 6 tiles per stack are allowed when loading tile on the underlayments. Refer to the Polyglass Tile Loadin,,- Guidelines. See General Limitations #9 and #10. 6. Battens and/or Counter -battens, as required by the tile manufacturers NOA, must be used on all projects for pitch/slopes of 7/12" or greater. It is suggested that on pitch/slopes in excess of 6 '/a"/12", precautions should be taken, such as the use of battens to prevent tile sliding during the loading process. 7. Minimum cure time after membrane installation & before loading of roofing tiles is Forty -Eight (48) Hours. 8. Polystick membranes may not be used in any exposed application such as crickets, exposed valleys, or exposed roof to wall details. 9. Repair of Polystick membranes is to be accomplished by applying Polyglass Polyplus 55 Premium Modified Flashing Cement, Polyglass Polyplus 50 Premium MB Flashing Cement, XtraFlex 50 Premium Modified Wet/Dry Cement, Polyglass PG500 MB Flashing Cement to the area in need of repair, followed by a patch of the Polystick zaterial of like kind should be set and hand rolled in place over the area needing such repair. Patching membrane shall be a minimum of 6 inches in either direction. The repair should be installed in such a way so V_-iat water will run parallel to or over the top of all laps of the patch. NOA No.: MADE COUNTY 1 M ... ��.� Expiration Date:: 09/09/13/2 3/21 Approval Date: 07/06/17 Page 7 of 8 10. All self -adhered membranes must be rolled to ensure full contact with approved substrates. Polyglass requires a minimum of 40 lbs for a weighted roller for the rolling of the field membrane. Hand rollers are acceptable for rolling of patches or small areas of the roof. Brooming may be used where slope prohibits rolling. 11. All approved substrates should be dry, clean and properly prepared, before any application of Polystick membranes commences. An approved substrate technical bulletin can be furnished upon request. It is reoonimcnded to refer to applicable building codes prior to installation to verify acceptable substrates. 12. The Polyglass Miami -Dade Notice of Acceptance (NOA) approval for Polystick membranes can be furnished upon request by our Technical Services Department by calling 1 (800) 894-4563. 13. Questions in regards to the application of Polyglass products should be directed to our Technical Services Department at 1 (800) 894-4563. 14. Polyglass recommends that applicators follow good roofing practices and applicable frocadures a$'oli;hed by...... the National Roofing Contractors Association (NRCA). • • • • • ...... . .. ...... PLEASE CHECK WITH LOCAL BUILDING CODES REGARDING LIMITATIONS OF SPECjjjC APPI JCA f IONS. ; • • • •; LOCAL CODES MAY SUPERSEDE POLYGLASS REQUIREMENTS AND RECO1VWEidDATI4N§* • • • • • • .. .. .. ...... END OF THIS ACCEPTANCE ...... . . . •• . •.•..• • . •• •• . •..• 0000 NOA No.: 17-0614.22 MIAMFDADE COUNTY Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 8 of 8 Miami -Dade D.E.R.M. Air Quality Management Division This is to certify that the required Notification(s) Regarding asbestos have been submitted in Compliance with Applicable regulations. Digitally signed by Florian De Clerc . Date:2020.12.15 MI AM -05'00' ® Florida Department of Department of Regulatory and Economic Resources Environmental Protection Environmental Resources Management 701 NW 1st Court, 2nd Floor Division of Air Resource Management Miami, Florida 33136-3912 NOTICE OF DEMOLITION OR ASBESTOS RENOVATION T: 305-372-6925 Fax: 2-6954 miamidamidade.gov TYPE OF NOTICE (CHECK ONE ONLY) ❑ ORIGINAL ❑ REVISED ❑ CANCELLATION ❑ COURTESY TYPE OF PROJECT (CHECK ONE ONLY) ❑ DEMOLITION ❑ RENOVATION ❑O ROOFING IF DEMOLITION, IS IT AN ORDERED DEMOLITION? ❑ YES ❑ NO IF RENOV ATION: IS IT AN EMERGENCY RENO VATION OPERATION? ❑ YES ❑ NO File # IS ITA PLANNED RENO VATION OPERATION? ❑ YES ❑ NO Process # I. FacilityName SHORE SQUARE PLAZA Address 9055 Biscayne SW city Miami Shores State FL Zip 33138 County Site Consultant Inspecting Site :.. • ; . Building Size 20000 (Square Feet) # of Floors t Building Age in Oars -0 . • • • • • ; • Prior Use: ❑ School/College/University ❑Residence ❑ Small Business Other DOLLWSTOIt'E ; • • • • Present Use: ❑School/College/University ❑Residence ❑Small Business Other ooLGCtS=dkt" • • • • • e • • II. Facility Owner SHORE SQUARE PROPERTIES LLC Phone • • • e • e • Address 696 NE 125 ST • • • • • • City MIAMI State FL Zip33161 •••• • ••••• III. Contractor's Name CAYE WORKS ROOFING •••••• ••• • Phone 30545645101 • • • •••••• Address 10760 NW 138TH ST. UNIT 2 •• •• •• •••••• • City HIALEAH GARDENS State FL Zip 33018 • • • • Is the contractor exempt from licensure under section 469.002(4), F .S.7 ❑ YES • • •• • ❑✓ NO • • •••••• IV. Scheduled Dates: (Notice must be postmarked 10 working da ys before the project start date) • • e • • • • • 0 • • • • • • • • • Asbestos Removal (mm/dd/yy) Start: Finish: Demo/Renovation (mm/dd/yy) Stara o1rot�R, o1n5�21 V. Description of planned demolition or reno vation work to be performed and methods to be employed, including demolition or renovation techniques to be used and description of affected facility components. ROOF - REPAIR IX. Procedures to be Used (Check AIIThatApply): ✓ I Strip and Removal IQ I Glove Bag Bulldozer I ❑ I Wrecking Ball ❑ I Wet Method I ❑ I Dry Method I LJ I Explode I ❑ I Bum Down OTHER: Procedur es for Unexpected RACM: Asbestos W asteTransporter: Name Address 10587 NW 3RD ST City PEMBROKE PINES STOP AND RENOTIFY EL DUQUE SERVICE CORP Phone 305-625-WB1 State FL ZID 33026 Waste Disposal Site: Name WASTE MANAGEMENT Address 9350 NW 89 AVE City MEDLEY State FL Zip 331T8 RACM or ACM: Procedure, including analytical methods, employed to detect the presence of RACM and Category I and 11 nonfriable ACM. Amount of RACM or ACM` square feet surfacing material square feet cementitious material linear feet pipe square feet resilient flooring cubic feet of RACM off facility components 800 square feet asphalt roofing "Identify and describe surfacing material and other materials as applicable. I certify that the above information is correct and that an individual trained in the provisions of this regulation (40 CFR Part 61, Subpart M) will be on - site during the demolition or renovation and evidence that the required training has been accomplished by this person will be available for inspection during normal business hours. I have read and understood the additional information provided on the back of this form. IF ► ru A (Print Name of er/ rator) A" d,c:C�i�► I1- 09 -12 O -4 (Signature of Owner/O tor) (Date) (Contact phone #) RER USE ONLY Postmark/Date Received ID # 16101-iss 10/10 DISTRIBUTION: White-RER Yellow -Applicant Pink -Reserve Gold -Reserve 12/15/2020 k-PPr•tYiittiraCa 9selectk 18 ck to Main Menu Miami -Dade County - pay_success IF fMtAW21 You have successfully completed your payment process. You can print this page or record your Permit, Process and Authorization number. Date 12/1=020 [Time :16 26 Authorization Number 45075 Prooess Number jgi103A235 Permit Number ransactlon Number 15122OA43-BC066124-C98C-4829-BE6B-2EOCED435488 ame EDGAR D MEDINA • • ob Address 1110750 NW 138 ST BAY 2 • • • x Date • • • • • 24goes mount 11107.50 t H— I onrme swelm I PROM l EM I P. m st I Contact us • • • Plante rT ac w I y g Routes 6 Roa4tt4 I Twk Enfor mqM I Wom ApOlotion Sgrvices • • Small your eoimnents, questions and suggestions to ftftgster • • • This page was last edited on: August 2016 • • ••••• ••• • •• •••• https:/Mr85exp.rriamidade.gov/espWeb/RequestController 1/1 ORES SH � t h�F�iEs��yE OR1 PERMIT ADDRESS: APPLICATION DATE EXPIRATION DATE: CONTACTS Applicant Contractor 9045 BISCAYNE BLVD PARCEL: 1132060110051 Miami Shores, FL 33138 11109/2020 SQUARE FEET: 200.00 DESCRIPTION: MANSARD ROOF REPAIR 05/08/2021 VALUATION: $2,000.00 NAME COMPANY ADDRESS EDGAR MEDINA CAYE WORKS, CORP 10750 NW 138 ST, UNIT 2 HIALEAH GARDENS, FL 33018 EDGAR MEDINA CAYE WORKS, CORP 10750 NW 138 ST, UNIT 2 HIALEAH GARDENS, FL 33018 Owner SHORE SQUARE PROPERTIE: SHORE SQUARE PORPERTIES LLC 696 NE 125 S1 • • • • • LLC MIAMI,FILP••• • 60 �• • •••�:• SHORE SQUARE PROPERTIE: SHORE SQUARE PORPERTIES LLC 696 125k•• • • • •• •••••• LLC MIAMI, lJ:Vfl • • • 090*00 REVIEW ITEM STATUS REVIEWER • • • • • • • • • • • •: • • t. Building v.1 Requires Re -submit Ismael Naranjo email: bo@msAo# • • • • • • • • • • Review item used to allow building to comment during a plan review • • • • • • • • • Correction: General -Ismael Naranjo (11 /18/20) - Not Resolved ' • • • • • • • • • • Comments: 11118/2020 • • • • • • • Provide roof package with details and specifications for the roof. Please make sure to reflect the work area and4proNde area salsuYations. : • • • •: Corrective Action: Provide roof package with details and specifications for the roof. Please make sure to reflect the work araa.enrp!rovide area calculations. Building v.2 Requires Re -submit Ismael Naranjo email: bo@msvfl.gov Review item used to allow building to comment during a plan review Correction: General - Ismael Naranjo (11 /25/20) - Not Resolved Comments: Please comply with previous rejection comments. 11 /18/2020 Provide roof package with details and specifications for the roof. Please make sure to reflect the work area and provide area calculations. Information should be clear and legible as per section 107.2 of the 2017 FBC, Building. 1521.4 Not more than 25 percent of the total roof area or roof section of any eAsting building or structure shall be repaired, replaced or recovered in any 12-month period unless the entire e)dsting roofing system or roof section is replaced to conform to requirements of this code. If the roof area being repair is greater than 160 sq. Ft. Please provide DERM asbestos section approval. 105.3.1 December 02, 2020 10050 NE 2 Ave Miami Shores FL 33138 Page 1 of 1 MIMIQADE fro MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 T (786) 315-2590 F (786) 315-2599 NOTICE OF ACCEPTANCE (NOA) www."amidade.gov/economy Venezuelan Roof Tile, LLC 18803 S.W. 28 St. ...... Miramar Florida 33029-2433 ' • • •••••• • •••••• SCOPE: •••••• This NOA is being issued under the applicable rules and regulations governing the use otcomtructian materials. •The • documentation submitted has been reviewed and accepted by Miami -Dade County RER' F:t*ct Cgittrjl $ectiori•teNbe used in Miami Dade County and other areas where allowed by the Authority Having Jues li cilon (AH?J.� "' • • This NOA shall not be valid after the expiration date stated below. The Miami -Dade County ProducXontriol Secrtidil 00 (in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reseft tfie:-ight tq baye this • • • • product or material tested for quality assurance purposes. If this product or material fails to perform in Ilan accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is determined by Miami -Dade County Product Control Section that this product or material fails to meet the requirements of the applicable building code. This product is approved as described herein, and has been designed to comply with the Florida Building Code including the High Velocity Hurricane Zone of the Florida Building Code. DESCRIPTION: ALTUSA Roll Tile Type "S" LABELING: Each unit shall bear a permanent label with the manufacturer's naive or logo, city, state and following statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein. RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product. TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of NOA. ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done in its entirety. INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official. This NOA consists of pages 1 through 5. The submitted documentation was reviewed by Freddy Semino NOA No.: 19-0211.03 Expiration Date: 10/24/24 Approval Date: 10/24/19 Page 1 of 6 ROOFING ASSEMBLY APPROVAL Category: Roofing Sub Category: Roofing Tiles Material: Clay 1. SCOPE • This approves a roofing system using ALTUSA Roll Tile Type "S" manufacturred-1 } Alfareria, Del TurbjA, S.A. (ALTUSA) Barquisimeto, Estado Lara Venezuela., and is distributed by Ventznelan Voof Tile L.LC.aa described in Section 2 of this Notice of Acceptance. For locations where tM *Pfessure requiremeot„s• .js; determined by applicable Building Code does not exceed the design pressure values Utained:6y calculations in' compliance with RAS 127 using the values listed in section 4 herein. The attachn�;! �alculati • • all bj.C4& p g QnS.� �.... as a moment based system. .. .. .. ...... . . .. . ...... 2. PRODUCT DESCRIPTION • • • • Manufactured by Test ' Product ."' • • • Applicant Dimensions Specifications Description • • • • ALTUSA Roll Tile Type L = 18.5" ASTM C1167 High profile clay roof tile. For adhesive set "S" W = 11.5" Type I applications with the nominal interlocking side .50" thick nominal Grade 1 lap. 3.00" high Trim Pieces Length: varies TAS 112 Accessory trim, clay roof pieces for use at hips, Width: varies rakes, ridges and valley terminations varying thickness manufactured for tile profile. 2.1 MANUFACTURING LOCATION 2.1.1. Barquisimeto, Estado Lara Venezuela 2.2 EVIDENCE SUBMITTED Test Agency Test Identifier Test Name/Report Date PRI Construction Materials ODMI-001-02-01 ASTM C1167 01/29/19 Technologies LLC ODMI-002-02-01 TAS 101 01/29/19 ODMI-002-02-01 TAS 101 Addendum Letter 10/09/19 NOA No.: 19-0211.03 Expiration Date: 10/24/24 Approval Date: 10/24/19 Page 2 of 6 3. LIMITATIONS: 3.1 Fire classification is not part of this acceptance. 3.2 For adhesive set applications, a static field uplift test in accordance with TAS 106 may be required, refer to applicable building code. 3.3 Applicant shall retain the services of a Miami -Dade County Certified Laboratory to perform quarterly test in accordance with TAS 112, appendix `A'. Such testing shall be submitted to the Rejulator}:audLconomic Development Department — Product Control Section for review. • • •. 3.4 Minimum underlayment shall be in compliance with the applicable Roofing Appl" ons $t'ahtiaids lisj j4:: • section 4.1 herein. • • • • • • 3.5 30/90 hot mopped underlayment applications may be installed perpendicular t 'th87pof sl4P� utiless stated otherwise by the underlayment material manufacturers published literature. 0 0 "' • • 3.6 This acceptance is for wood deck applications. Minimum deck requirements �Vj D; in camp;iance with" applicable building code. ...... . • 3.7 All products listed herein shall have a quality assurance audit in accordance with th4 Florida Belding 4', dd and Rule 61 G20-3 • • • 4. INSTALLATION 4.1 Clay Type Tile and its components shall be installed in strict compliance with Roofing Application Standard RAS-120 (Mortar Set and Adhesive Set Tile Applications). 4.2 Data For Attachment Calculations. Table 1: Average Weight (W) and Dimensions (I x w ) Tile Profile Weight-W (lbf) Length-1 (ft) Width-w (ft) ALTUSA Roll Tile Type "S" 7.1 1.54 0.95 Table 2: Aerodynamic Multipliers - A (ft3) Tile Profile A (ft3) Batten Application A (ft3) Direct Deck Application ALTUSA Roll Tile Type "S" N/A 0.31 Table 3: Restoring Moments due to Gravity - Mg (ft.-lbf) Tile 2":12" 3":12" 4":12" 5":12" 6":12" 7":12" Profile I or Greater ALTUSA Roll Tile Type "S" Direct Deck Direct Deck Direct Deck Direct Deck Direct Deck Direct Deck 5.42 5.34 5.24 5.11 4.96 4.80 NOA No.: 19-0211.03 MIAMMADE Wo Expiration Date: 10/24/24 ' • Approval Date: 10/24/19 Page 3 of 6 Table 4: Attachment Resistance Expressed as a Moment - Mf (ft.-Ibf) for Single Paddy Adhesive Set Systems Tile Profile Tile Application Minimum Attachment Resistance ALTUSA Roll Tile Type "S" ICP Adhesives and Sealants 37' ICP Adhesives Polyset@ AH-160 . ; • • • : • Two component polyurethane foam• • t.. adhesive. .. ...... ..he • 1 Large Paddy - 34 grams of ICP Adhesives Polyset® AH-160. Install tiles with a 3 inch head lap. .... • • • • • •.: ...... . ... ..... .. .. ...... 5. LABELING .. . • • 5.1 All tiles shall bear the imprint or identifiable marking of the manufacturer's name or'loga as d6fttllbti• below, or following statement: "Miami -Dade County Product Control Appro;vov 98 • • • . •..• ALTUSA MADE IN VENEZUELA (LOCATED ON THE TOP PAN OF TILE NOA No.: 19-0211.03 MIAMI•DADE COuNTY Expiration Date: 10/24/24 • ► Approval Date: 10/24/19 Page 4 of 6 ALTUSA Roll Tile Type "S" NOA No.: 19-0211.03 MIAMI•DADE COUNTY Expiration Date: 10/24/24 • • Approval Date: 10/24/19 Page 5 of 6 n PROFILE DRAWING ...... . .... . .. ..... ...... . ... ..... .. .. .. .. ...... 0 ALTUSA Roll Tile Type "S" 6. BUILDING PERMIT REQUIREMENTS: 6.1 Application for building permit shall be accompanied by copies of the following: 6.1.1 This Notice of Acceptance. 6.1.2 Any other documents required by Building Official or Applicable building code in order to properly evaluate the installation of this system. END OF THIS ACCEPTANCE NOA No.: 19-0211.03 MLA DADE COUNTY Expiration Date: 10/24/24 �Approval Date: 10/24/19 Page 6 of 6 ROOFING COMPONENT APPROVAL Category: Roofing Sub -Category: Underlayment Material: SBS , APP Self -Adhering Modified Bitumen PRODUCTS DESCRIPTION: Test Product* •••••• Product Dimensions Specification Descri'6on' .... • Polystick IR-Xe 65' x 3'33/8" •0000*0 ASTM D 1970 A fine granular/sand top surfass self -adhering, APP . • Manufacturing Or 65' x 3' polymer modified, fiberglass Mvifo,-ced, bituminous :"": Location #1 & #2 60 mils thick sheet material for use as an unUttPayment'in sloped roof:•.• assemblies. Designed as an Ice•& ram shod;'; 00000 Polystick Dual Pro 61' x 3'33/8" TAS 103 and A rubberized asphalt self-ad:ei'lgg;glass-fiber/polyester - Manufacturing 60 mils thick ASTM D 1970 reinforced waterproofing me�mbran'e. DeQitpedas a 0 • •• • Location #2 metal roofing and roof tile uatierlaYment. ...... Polystick Tile Pro 61' x 3'33/8" .000 • • TAS 103 and A rubberized asphalt self -adhering, glass-fii5e;olyester Manufacturing 60 mils thick ASTM D 1970 reinforced waterproofing membrane. Designed as a metal Location #2 roofing and roof tile underlayment. Polystick TU Max 65'8" x 3'3-3/8" TAS 103 and A rubberized asphalt self -adhering, polyester reinforced Manufacturing 60 mils thick ASTM D 1970 waterproofing membrane. Designed as a a roof tile Location #1 & #2 underlayment. Polystick TU P 32'10" x 3'33/8" TAS 103 and A rubberized asphalt waterproofing membrane, glass - Manufacturing 130 mils thick ASTM D 1970 fiber/polyester reinforced, with a granular surface Location #2 designed for use as a tile roof underlayment. Polystick TU Plus 65' x 3'33/8" TAS 103 and A rubberized asphalt self -adhering, glass-fiber/polyester (Surface Printing) 80 mils thick ASTM D 1970 reinforced waterproofing membrane. Designed as a metal Manufacturing roofing and roof tile underlayment. Location #1 & #2 Polystick NITS 65'8" x 3'33/8" TAS 103 A homogeneous, rubberized asphalt waterproofing Manufacturing 60 mils thick membrane, glass fiber reinforced with polyolefinic film Location #2 on the upper surface for use as an underlayment for metal roofing, roof tile, slate tiles and shingle underlayment. Polystick NITS Plus 65'8" x 3'33/8" TAS 103 A homogeneous, rubberized asphalt waterproofing Manufacturing 60 mils thick membrane, glass fiber reinforced with polyolefinic film Location #2 on the upper surface for use as an underlayment for metal roofing, roof tile, slate tiles and shingle underlayment. Elastoflex S6 G 32'10" x 3'3 %" TAS 103 and Polyester reinforced, SBS modified bitumen membrane Manufacturing ASTM D 6164 with a sanded back face and a granule top surface. For Location #2 use in roof tile underlayment systems. NOA No.: 17-0614.22 Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 2 of 8 MANUFACTURING PLANTS: 1. Hazelton, PA 2. Winter Haven, FL EVIDENCE SUBMITTED Test A2ency Test Identifier Test Name/Report Date Trinity ERD P10870.09.08-R1 TAS 103 ;•42jQ4/08 P 10870.04.09 TAS 103/ASTM D4798 8e G k• 04/ 13/09 .... • • P33360.06.10 ASTM D1970„••, �•0,101/10 '. P33370.03.11 TAS 103 ...:.. Q/02/11 P33370.04.11 ASTM D 1623 •••• .. 04, 26/11 ;••••; P36900.09.11 TAS 103/ASTM D4798 &"t55 twol/11 ..... P37300.10.11 TAS 110/ASTM D4798 8! tM • • V29/11 • •: • •' P40390.08.12-2 ASTM D 1623 `` " 0'08/67/12 • • • • • • P37590.07.13-1 ASTM D6164 t/02/13 '. P45270.05.14 TAS 103, TAS 110 & ASTM D1623 •Q�A2/14 P46520.10.14 ASTM D1623 `••` i •,W/03/l4•;•••••: P44360.10.14 TAS 103 & TAS 110 `••1,4/U7/14 P43290.10.14 ASTM D 1970 & TAS 110 10/17/14 PLYG-SC10130.06.16-3 TAS 103 & TAS 110 06/27/16 PLYG-10130.06.16-1 ASTM D1970 & TAS 110 06/27/16 PRI Asphalt Technologies PUSA-035-02-01 TAS 103 09/29/06 PUSA-055-02-02 TAS 103 12/10/07 PUSA-089-02-01 TAS 103/ASTM D4798 & G155 07/06/09 Momentum Technologies, Inc. JX20H7A TAS 103/ASTM D4798 & G155 04/01/08 RX14E8A TAS 103/ASTM D4798 & G155 11/09/09 DX23D8B TAS 103/ASTM D4798 & G155 02/18/10 DX23138A TAS 103/ASTM D4798 & G155 02/18/10 LABELING: 1. All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or logo, city and state of manufacturing facility and the following statement: "Miami -Dade County Product Control Approved" or the Miami -Dade County Product Control Seal as shown below. BUILDING PERMIT REQUIREMENTS: Application for building permit shall be accompanied by copies of the following: 1. This Notice of Acceptance. 2. Any other documents required by the Building Official or applicable building code in order to properly evaluate the installation of this materials. NOA No.: 17-0614.22 Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 3 of 8 INSTALLATION PROCEDURES: Deck Type 1: Wood, non -insulated Deck Description: Min. 19/32" plywood or wood plank System Type E(1): Anchor sheet mechanically fastened to deck, membrane adhered Anchor/Base Sheet: One or more plies of ASTM D 226 Type H or ASTM D 2626. Fastening: Per FBC 1518.2 & 1518.4 Nails and tin caps 12" grid, 6" o.c. at a minimum 4" head lap. (for base sheet only) Membrane: Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS or Polystick MTS %W. j�lf-adlj�ted: • • • Surfacing: See General Limitations Below. ...... . :*Goo: .... . .. ..... Deck Type 1: ...... . ... ..... Wood, non -insulated .. .. .. . ...... Deck Description: Min. 19/32" plywood or wood plank • • • • • • .' System Type E(2): Anchor sheet mechanically fastened to deck, membrane adhered . .. Anchor/Base Sheet: One or more plies of ASTM D 226 Type II or ASTM D 2626. Fastening: Per FBC 1518.2 & 1518.4 Nails and tin caps 12" grid, 6" o.c. at a minimum 4" head lap. (for base sheet only) Membrane: Elastoflex S6 G, hot asphalt applied Surfacing: See General Limitations Below. Deck Type 1: Wood, non -insulated Deck Description: Min. 19/32" plywood or wood plank System Type E(3): Base sheet mechanically fastened to deck, subsequent cap membrane self- adhered. Anchor/Base Sheet: One or more plies of ASTM D 226 Type 11 or ASTM D 2626. Fastening: Per FBC 1518.2 & 1518.4 Nails and tin caps 12" grid, 6" o.c. at a minimum 4"head lap. (for base sheet only) Ply Sheet: Polystick MTS Plus, self -adhered with minimum 3" horizontal laps and minimum 6" vertical laps. Membrane: Polystick TU Plus, self -adhered. Surfacing: See General Limitations Below. NOA No.: 17-0614.22 MahtaowDe COUNn Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 4 of 8 INSTALLATION REQUIREMENTS: 1. All nails in the deck shall be carefully checked for protruding heads. Re -fasten any loose deck panels, and sweep the deck thoroughly to re move any dust and debris prior to application. 2. Place the underlayment over metal drip edge in accordance with RAS 111. 3. Place the first course of membrane parallel to the eave, rolling the membrane to obtain maximum contact. Remove the release film as the membrane is applied. All side laps shall be a minimum of 3" and end laps shall be a minimum of 6". Roll the membrane into place after removing the release strip. Vertical strapping of the roof with Polystick is acceptable. Membrane shall be back nailed in accordance with applicable building code. 4. When applying the membrane in the valley, start at the low point and work to the high point, roving the • • • • • • membrane from the center outward in both directions. • • :...:. 5. For ridge applications, center the membrane and roll from the center outward in botb Awtions. • 6. Roll or broom the entire membrane surface so as to have full contact with the surfVt, gtv�g l�l n s al%ttention • to lap areas. .... . .. ..... 7. Flash vent pipes, stacks chimneys and penetrations in compliance with Roof Asse•W••Y•A••rrent*PrptiuFt Con•%ol.. .. Notice of Acceptance. ...... 8. All protrusions or drains shall be initially taped with a 6" piece of underlayment. The flashing M smell be • • • • : • pressed in place and formed around the protrusion to ensure a tight fit. A second layer of Polysli k-oghall be:,,,, applied over the underlayment. 0000 • ... GENERAL LIMITATIONS: 1. Fire classification is not part of this acceptance. 2. Polystick Dual Pro, Polystick Tile Pro, Polystick TU Plus, Polystick MTS and Polystick MTS Plus may be used in asphaltic shingles, wood shakes and shingles, non-structural metal roofing, roof tile systems and quarry slate roof assemblies. Polystick TU P may be used in all the previous assemblies listed except metal roofing. Polystick IR-Xe may be used in all the previous assemblies listed except metal roofing and roof tile systems. Polystick TU Max may be used in non-structural metal roofing and roof tile systems. Elastoflex S6 G may be used in roof tile systems only. 3. Deck requirements shall be in compliance with applicable building code. 4. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS and Polystick MTS Plus shall be applied to a smooth, clean and dry surface. The deck shall be free of irregularities. 5. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS and Polystick MTS Plus shall not be adhered directly over a pre-existing roof membrane as a recover system. 6. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS and Polystick MTS Plus shall not be left exposed as a temporary roof for longer than the amount of days listed in the table below after application. Polyglass reserves the right to revise or alter product exposure times; not to exceed the preceeding maximum time limitations. Ex osure Limitations (Days) MTS IR-Xe Elastoflex S6 G TU Plus TU P Tile Pro Dual Pro TU Max MTS Plus Winter Haven, FL 180 90 180 180 180 180 180 180 180 Hazelton, PA N/A 90 N/A 180 N/A N/A N/A 180 N/A 7. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and NOA No.: 17-0614.22 MIAMI•DADE COUNTY Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 5 of 8 8. 9. Rule 61 G20-3 of the Florida Administrative Code. In roof tile application, data for the attachment resistance of roof tiles shall be as set forth in the roof tile manufacturer's Notice of Acceptance. Polystick Tile Pro, Polystick TU Max, Polystick TU Plus or Elastoflex S6 G may be used in both adhesive set and mechanically fastened roof tile applications. Polystick Dual Pro is limited to mechanically fastened roof tile applications. Polystick MTS and Polystick MTS Plus are limited to mechanically fastened with the limitations outlined in Section 9. Polystick TU P may be used in mechanically fastened roof tile applications with the exception of mortar set tile applications. :...:. When loading roof tiles on roof tile underlayment for (direct -to -deck) tile assemblies,•t+he laximum roof slope . • shall be as follows: (See Table Below) • • •; • • .... • .. • • • • Tile Polystick Elastoflex Polystick TU Plus Polystick Poly sti�odrr S stein 3 •' : Y Y Y Y Y ) Profile MTS S6 G TU P, Tile Pro, TU Max MTS ilea •(E MCI S� Dlus with. Dual Pro ": ": , T�•l:lus • • Flat Tile Prohibited 4:12 6:12 6:12 5:L2... 6:12 without battens • • .. Profiled Prohibited 4:12 6:12 6:12 4:12 . •. 6!12 Tile without battens . "". • The above slope limitations can be exceeded only by using battens in accordance with the Approved Tile System Notice of Acceptance and applicable Florida Building Code requirements. When battens are required, they shall be utilized during loading and installation of tiles. 10. Care should be taken during the loading procedure to keep foot traffic to a minimum and to avoid dropping of tile directly on the underlayment. Refer to Polyglass' Tile loading detail below for loading procedure — two tiles laid perpendicular to slope followed by a maximum four tile stack parallel to the slope, for a total of 6 tiles — for all underlayments except Polystick MTS which shall be loaded onto battens. POLYSTiCKTU Phs NOA No.: 17-0614.22 Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 6 of 8 00 .. ••• ... .. 11. Refer to prepared roofing system Product Control Notice of Acceptance for listed approval of this product with specific prepared roofing products. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS, Polystick MTS Plus or Elastoflex S6 G may be used with any approved roof covering Notice of Acceptance listing Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS, Polystick MTS Plus or Elastoflex S6 G as a component part of an assembly in the Notice of Acceptance. If Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS, Polystick MTS Plus or Elastoflex S6 G are not listed, a request maybe made to the Authority Having Jurisdiction (AHJ) or the Miami -Dade County Product Control Soctionefor apl: ovaf Providgd.... that appropriate documentation is provided to detail compatibility of the products, wind up4ift ret§Me, and fire% testing results. ...... POLYGLASS GENERAL APPLICATION GUIDELINES FOR POLYSTICKOMEMAA* fFES • • • • PLEASE CHECK WITH LOCAL BUILDING CODES REGARDING LIMITATIONS OF SI'fCfPIC APPLIMATIONS' • • • • • LOCAL CODES MAY SUPERSEDE POLYGLASS REQUIREMENTS AND RECCC%1M-E1 DATIO,NS.� 1. Polyglass does accept the direct application of Polystick underlayment membranes to wool decks. Jystallers • •; cautioned to refer to applicable local building codes prior to direct deck installation to ensure this i* acceptable. Please also refer to applicable Product Data Sheets of the corresponding products. 2. All rolls, with the exception of Polystick TU Plus should be back -nailed in selvage edge seam as per Polyglass Back Nailing Guide. Nails shall be, 11 gauge ring shank type, applied with a minimum 1 %" metal disk as required in Miami -Dade County or simplex type nail as otherwise allowable in other regions, at a minimum rate of 12" o.c. Polystick TU Plus should be back nailed in designated area marked "nail area, area para clavar" on the face of membrane, with the above stated nails and/or disks. The head lap membrane is to cover the area being back -nailed. (Please refer to applicable local building codes prior to installation.) 3. All seal lap seams (selvage laps) must be rolled with a hand roller to ensure full contact. 4. All fabric over fabric; and granule over granule end laps, shall have a 6" wide, uniform layer of Polyglass Polyplus 55 Premium Modified Flashing Cement, Polyglass Polyplus 50 Premium MB Flashing Cement, XtraFlex 50 Premium Modified Wet/Dry Cement, Polyglass PG500 MB Flashing Cement, applied in between the application of the lap. The use of mastic between the laps does not apply to Polystick MTS. 5. A maximum of 6 tiles per stack are allowed when loading tile on the underlayments. Refer to the Polyglass Tile Loading Guidelines. See General Limitations #9 and #10. 6. Battens and/or Counter -battens, as required by the tile manufacturers NOA, must be used on all projects for pitch/slopes of 7/12" or greater. It is suggested that on pitch/slopes in excess of 6 '/4"/12", precautions should be taken, such as the use of battens to prevent tile sliding during the loading process. 7. Minimum cure time after membrane installation & before loading of roofing tiles is Forty -Eight (48) Hours. 8. Polystick membranes may not be used in any exposed application such as crickets, exposed valleys, or exposed roof to wall details. 9. Repair of Polystick membranes is to be accomplished by applying Polyglass Polyplus 55 Premium Modified Flashing Cement, Polyglass Polyplus 50 Premium MB Flashing Cement, XtraFlex 50 Premium Modified Wet/Dry Cement, Polyglass PG500 MB Flashing Cement to the area in need of repair, followed by a patch of the Polystick material of like kind should be set and hand rolled in place over the area needing such repair. Patching membrane shall be a minimum of 6 inches in either direction. The repair should be installed in such a way so that water will run parallel to or over the top of all laps of the patch. NOA No.: 17-0614.22 Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 7 of 8 10. All self -adhered membranes must be rolled to ensure full contact with approved substrates. Polyglass requires a minimum of 401bs for a weighted roller for the rolling of the field membrane. Hand rollers are acceptable for rolling of patches or small areas of the roof. Brooming may be used where slope prohibits rolling. 11. All approved substrates should be dry, clean and properly prepared, before any application of Polystick membranes commences. An approved substrate technical bulletin can be furnished upon request. It is recommended to refer to applicable building codes prior to installation to verify acceptable substrates. 12. The Polyglass Miami -Dade Notice of Acceptance (NOA) approval for Polystick membranes can be furnished upon request by our Technical Services Department by calling 1 (800) 894-4563. 13. Questions in regards to the application of Polyglass products should be directed to Dear Tkec nical'Services Department at 1 (800) 894-4563. • • • ; • • • • • • 14. Polyglass recommends that applicators follow good roofing practices and applicabld'pio'ftures as outlined b:.... the National Roofing Contractors Association (NRCA). "" ' • .... . .. ..... . . ...... . ... ..... PLEASE CHECK WITH LOCAL BUILDING CODES REGARDING LIMITATIONS OF SrECTI*IC APPIfICA7IONSP • • • • • • LOCAL CODES MAY SUPERSEDE POLYGLASS REQUIREMENTS AND REC(MMA&DATIONS. ' • • •• • •••••• END OF THIS ACCEPTANCE • • • • :0009 NOA No.: 17-0614.22 Expiration Date: 09/13/21 Approval Date: 07/06/17 Page 8 of 8