RF-19-2765Miami Shores Village
10050 NE 2 Ave
Miami Shores FL 33138
305-795-2204
Issue Date: 01/13/2020
Location Address Parcel Number
1411 NE 102ND ST, Miami Shores, FL 33138 1132050240200
Contacts
Permit No.: RF-1 1 -19-2765
Permit Type: Roof
Work Classification: Tile
Permit Status: Approved
Expiration: 07/13/2020
ROGERIO AND MIGDALIA CARRILLO Owner DM ROOFING COPMANY INC Contractor
1411 NW 102 ST, MIAMI SHORES, FL 331382621 DENIS MARTINEZ
Other: 3057547185 1951 NW 141, OPALOCKA, FL 33051
Business: 3056847587 DMROOFINGCO@GMAIL.COM
Mobile: 7862673066
Description: TILE RE ROOF Valuation: $ 30,200Inspection Requests:
305-762-4949
Total Sq Feet: 3,266.00
Fees
Amount
Application Fee - Other
$50.00
CCF
$18.60
DBPR Fee
$4.88
DCA Fee
$3.25
Education Surcharge
$6.20
Roofing Fee
$275.00
Scanning Fee
$9.00
Technology Fee
$8.13
Tota I :
$375.06
Payments
Date Paid Amt Paid
Total Fees
$375.06
Check # 3803
11/19/2019 $50.00
Check # 3885
01/13/2020 $325.06
Amount Due:
$0.00
Building Department Copy
In consideration of the issuance to me of this permit, I agree to perform the work covered hereunder in compliance with all ordinances and regulations
pertaining thereto and in strict conformity with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores
Village. In accepting this permit I assume responsibility for all work done by either myself, my agent, servants, or employes. I understand that separate
permits are required for ELECTRICAL, PLUMBING, MECHANICAL, WINDOWS, DOORS, ROOFING and SWIMMING POOL work.
OWNERS AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws
regulating construction and zoning. Futhermore, I authorize the above named contractor do the work stated.
1 n
Authorized Signature: Owner / Applicant / Contractor / A6ent Date
January 13, 2020 Page 2 of 2
Miami Shores Village FZ'F,-C
Building Department
10050 N.E.2nd Avenue, Miami Shores, Florida 33138
Tel: (305) 795-2204 Fax: (305) 756-8972
INSPECTION LINE PHONE NUMBER: (305) 762-4949
BUILDING
PERMIT APPLICATION
❑BUILDING ❑ ELECTRIC I< ROOFING
\NOV19�19
BY:
FBC 20
Master Permit No. I I — C, ► l7 J
Sub Permit No.
❑ REVISION ❑ EXTENSION ❑RENEWAL
❑PLUMBING ❑ MECHANICAL [:]PUBLICWORKS [:]CHANGE OF ❑ CANCELLATION ❑ SHOP
CONTRACTOR DRAWINGS
JOB ADDRESS: `A\\
City: `Miamii Shores /� I� County: Miami Dade Zip: L 8165
1 `' Folio/Parcel#: J 2 !i • UZ - VZw_Is the Building Historically Designated: Yes NO
Occupancy Type: Load: Construction Type: Flood Zone: BF((E::FFE:
OWNER: Name (Fee Simple Titleholder): ,� Phone#: " 1,,�� L\t6$ __!1 61
AddressAL4\ � �. loz�' 4
City: In%c \ 5mre-s T State: k)Ic (` Zip:
Tenant/Lessee Name: Phone#:
Email:
CONTRACTOR: Company Name: Mn YcUNl
Address: y
City: �~ r(a State: Zip:
Qualifier Name: __ `-� Phone#: �,��'".e
State Certification or Registration #: 11�"t1 Certificate of Competency #:
DESIGNER: Architect/Engineer:
Address:
City:
Phone#:
Zip:
Value of Work for this Permit: $ 30. %7 .(Do Square/Linear Footage of Work:1,�C�
Type of Work: ❑ Addition ❑ Alteration
�ltera�QY�tion❑ New ❑ Repair/Replace �1 ❑ Demolition
Description of Work: ���� �` le - E.
Specify color of color thru tile:
Submittal Fee $ �d Q 1 Permit Fee $
Scanning Fee $
Radon Fee $
Technology Fee $ Training/Education Fee $
Structural Reviews $
CCF $,
DBPR $
CO/CC $
Notary $
Double Femme !$
Bond $
TOTAL FEE NOW DUE $ ' Uk�'
(Revised02/24/2014) �� /,
Bonding Company's Name (if applicable)
Bonding Company's Address
City
State
Mortgage Lender's Name (if applicable)
Mortgage Lender's Address
City
State
Zip
►9
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRIC, PLUMBING, SIGNS, POOLS,
FURNACES, BOILERS, HEATERS, TANKS, AIR CONDITIONERS, ETC.....
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING
YOUR NOTICE OF COMMENCEMENT."
Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subject to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site
for the first inspection which occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the
inspection will not be approved and a reinspection fee will be charged.
1
/OWIJE? or 4GE1JT
The foregoing instrument was acknowledged before
me this
— ;-14— day of 20 , by
who is ersonal y < n to
me or who has produced as
identification and who did take an oath.
NOTARY PUBLIC:
ALVAREZ
Print:
CONTRACTOR
The foregoing instrument was acknowledged before me this
Z4+"day of fbC'jo20 J by
1 � n �ii b , who is ersonally know to
me or who has produced as
identification and who did take an oath.
NOTARY PUBLIC:
Sign:_
Print:
Commission # GG 15801
Seal: 9F off; My Commission Expires Seal:
July 26, 202C
I �
APPROVED BY r Plans Examiner
Structural Review
ISAAMANDA FERNANRE�
State of Florida -Notary Publi
_+ •; Commission 0 QO 218888
My Commission Expires
May 18, 2022
Zoning
Clerk
(Revised02/24/2014)
PH: 305-684-7587
EMAIL: DMROOF INGCO@GMAIL.COM
WEBSITE: WWW.DMROOFINGCO.COM
REROOF & REPAIRS
RESIDENTIAL & COMMERCIAL
PROPOSAL SUBMITTED TO:
E%
ROOFING CO.
LICENSED & INSURED CCC1331191
PROPOSAL
TILE
SHINGLE
FLAT ROOF
METAL ROOF
ROOF MAINTENANCE
DATE: OCTOBER 29,2019
NAME/S:
Ro erio & Mi dalia Carrillo l
JOB NAME:
Carrillo Residence
STREET:
1411 N.E. 102nd Street
PHONE:
CITY:
Miami Shores
ALT PHONE:
STATE:
FLORIDA
zIP:
733138
EMAIL:
DM hoofing Company Inc. will furnish all materials and perform all labor necessary including hauling
all roofing debris to complete the following;
TILE REROOF - PEEL AND STICK:
1. All labor and materials to remove the existing roof down to the sheathing boards.
2. Replacement of any rotten or decayed lumber is as follows, first 1001in./sq ft. included, after that cost is
$3.50 per lin /sq ft.
3. Re -nail deck with 8d ring shank nails.
4. Over the entire roof apply 1430 ASTM felt, tin capped according to code.
S. Install all new 3x3 eave drip around the perimeter of the house, new lead flashings for the plumbing pipes,
and new 16" wide galvanize valley metal in all valleys.
6. To install all new J vents and AP vents as needed.
7. Apply a Polystick T/U peel & stick over entire roof according to code.
8. To install all new ridge metal for tile and metal bird stop.
9. Over the entire roof apply a new tile, set in a paddy of foam, and cement all ridges.
10. Premises are to be left in a clean condition free from all roofing trash and debris.
11. Upon completion and final payment this roof will carry a 10 year guarantee on all workmanship.
12. All permits including uplift and engineering reports included in contract price.
13. All work to be done according to the Florida Building Code.
NOTE: PAYMENTS CANNOT BE WITHHELD AS A RESULT OF ADDITIONAL WORK THAT IS REQUESTED BY HOMEOWNER AFTER JOB COMPLETION.
All of the above work is to be completed for the sum of. Thirty-two thousand two hundred dollars $32,200.00
Payment Terms: 50% Down 30% Upon Dry -in 20% Upon Completion 2 n
NOTICE TO OWNER
This offer price is only valid 30 days and is void
thereafter at Contractor's discretion.
Customer shall pay for the services and (including repair and
maintenance) furnished by Contractor in accordance with the charges
on the Contract Agreement, as adjusted by Contractor hereunder,
upon completion. Interest will be charged on all accounts not paid
when due at a rate of two percent per month, which is 24% annually.
In the event that Customer fails to pay Contractor all amounts which
become due under the Service Agreement or fails to perform its
obligations hereunder, and Contractor refers such matter to an
attorney or collection agency, Customer agrees to pay, in addition to
the amounts due, any and all costs incurred by Contractor as a result
of such action, including reasonable attornev's fees.
CONTRACT ACCEPTANCE I,,..164
L, .,16
By signing below, owner agrees to our payment
terms and accepts our Terms & Conditions.
ACCEPTED B
PRINT NAME:
DATE SIGNED:
DM ROOFING COMPANY INC. AUTHORIZED SIGNATURE:
Summary Report
Property Information
Folio:
11-3205-024-0200
1411 NE 102 ST
Property Address:
Miami Shores FL 33138-2621
ROGERIO G CARRILLO &W
Owner
MIGDALIA L
1411 NE 102 ST
Mailing Address
MIAMI SHORES, FL 33138-2621
PA Primary Zone
1300 SGL FAMILY - 2801-3000 SQ
0101 RESIDENTIAL -SINGLE
Primary Land Use
FAMILY: 1 UNIT
Beds / Baths / Half
4/3/0
Floors
2
Living Units
1
Actual Area
3,022 Sq.Ft
Living Area
2,361 Sq.Ft
Adjusted Area
2,569 Sq.Ft
Lot Size
9,605 Sq.Ft
Year Built
1954
Assessment Information
Year
2019
2018
2017
Land Value
$652,864
$528,6221
$528,622
Building Value
$269,745
$269,745j
$269,745
XF Value
$28,682
$28,947
$29,224
Market Value
$951,291
$827,314't
$827,591
Assessed Value
$355,794
$349,160
$341,979
Benefits Information
Benefit Type 2019 2018 2017
Save Our Homes Assessment $595,497 $47$154'$485,612
Cap Reduction
Homestead Exemption $25,000 $25,000 $25,000
Second Homestead Exemption $25,000 $25,000, $25,000
Note: Not all benefits are applicable to all Taxable Values (i.e. County, School
Board, City, Regional).
Short Legal Description
APP! A11v' I
Taxable Value Information
Generated On : 11/1/2019
20191 20181, 20171
County
-
Exemption Value�
---
$50,000
50,00
�$299,0160
$50000
Taxable Value
$305,794
$291,979
School Board
�.
__
Exemption Value $25,000 $25,000 $25,000
Taxable Value $330,794 $324,160 $316,979
City
Exemption Value $50,000 $50,000 $50,000
Taxable Value
$305,794� $299,160
vv $291,979�
Regional
Exemption Value $50,000 $50,000 $50,000
Taxable Value $305,794 $299,160! $291,979
Sales Information
Previous Sale Price I OR Book -Page Qualification Description
12/01/1994 $317,500i 16620-2733 Sales which are qualified
07/01/1981 $225,000 11157-0713 Other disqualified
5 53 42 PB 56-86
MIAMI SHORES BAY PK ESTS AMD
LOT 24 BLK 1
LOT SIZE 85.000 X 113
OR 16620-2733 1294 1
The Office of the Property Appraiser is continually editing and updating the tax roll. This website may not reflect the most current information on record. The Property Appraiser
and Miami -Dade County assumes no liability, see full disclaimer and User Agreement at http://www,miamidade.gov/info/discialmer.asp
Version:
Miami Shores Village
Building Department
10050 N.E.2nd Avenue
Miami Shores, Florida 33138
Tel: (305) 795.2204
Fax: (305) 756.8972
OWNERS'S AFFIDAVIT OF EXEMPTION
ROOF TO WALL CONNECTION HURRICANE MITIGATION RETROFIT FOR EXISTING SITE -
BUILT SINGLE FAMILY RESIDENTIAL STRUCTURES
PERSUANT TO SECTION 553.844 F.S.
To: Miami Shores Village Building Department Date: t0—'c4A-1a
10050 NE 2nd Ave
Miami Shores, FI 33138
Re: Owner's Name:
Property Addres
Roofing Permit Number:
Dear Building Official:
I Nb.Y ( certify that I am not required to retrofit the roof to wall connections of my
IJ
building because:
—41,the just valuation for the structure for purpose of ad valorem taxation is less than $300,000,00. Please attach proof of ad
valorem taxation.
o The building was constructed in compliance with the provisions of the Florida Building Code (FBC) or with the provisions
of 1994 edition of the South Florida Building Code (1994 SFBC)
c�e..Y �o cc�r r Ella
Print Name
State of Florida
County of Dade
The undersigned, being the first duly sworn, deposes and says that he/she is the owner for the above property mentioned.
,1 n ✓'y
Sworn to and subscribed before me this � day of _ w�
� _ A CCCTTC ��ARG7
Notary Public, Sate of Florida at Large
State
�pP�V P`Bl �i I_IJJL 1 I L /"'.�v
of Florida -Notary Public
Commission # GG 15801
;yf f.o°;� My Commission Expires
July 2_ 2020
When the just valuation of the structure for purpose of ad valorem taxation is equal to or more than $300,000.00, and the building was not constructed with FBC nor a 1994
SFBC. Then you must provide a building application from a General Contractor for the Roof to Wall connection Hurricane Mitigation.
Revised on 5/21/2009
P , '%
dek ,
ENG NEERING
4225 SW 71 Ave, Miami. FI 33155
Tel: 786-398-9179 Fax: 786-800-2627
a1 roofinspectionC)o gmail.com
LAB CERTIFICATION #16-0510.15
SITE SPECIFIC INFORMATION
UPLIFT TEST — TAS #106
03/12/2020
Roofing Contractor DM ROOFING Permit # RF-11-192765
Job Address 1411 NE 102 ST MIAMI SHORES, FL 33138
Owner's Name ROGERIO G CARRILLO &W MIGDALIA L
Type of Tile BARCELONA 900
Approximate Roof Height 12 feet Roof Pitch 4/12
Approximate Square Footage of Roof 33 ft2
Date Tested 03/11/2020 Number of Tests 55
Contact Name DENIS
Date Installed
Type of Access to Roof LADDER
Required Testing Force 35 Lbs
Testing Equipment F.G.E.100
Phone # 786-267-3066
LOCATION
# OF TEST
PASS
# OF TEST
FAIL
Corner
5 Tests
5 Pass
Test
Fail
Perimeter
9 Tests
9 Pass
Test
Fail
Field
33 Tests
33 Pass
Test
Fail
Ridge
8 Tests
8 Pass
Test
Fail
TOTAL
55 Tests
55 Pass
0 Test
0 Fail
IN ACCORDANCE WITH THE CRITERIA OF PROTOCOL PA 106, THIS ROOF ASSEMBLY HAS PASSED THE STATIC UPLIFT QUALITY CONTROL TEST. THIS TAS 106 TEST HAS BEEN PERFORMED IN FULL ACCORDANCE TO THE
REQUIREMENTS OF DADE COUNTRY, WITH NO DEVIATIONS. THIS REPORT IS NOT GUARANTEED IN CASE OF CASE OF NATURAL OISASTERS THIS REPORT IT IS NOT VALID FOR INSURANCE CLAIMS.
Job Address 1411 NE 102 ST MIAMI SHORES, FL 33138
Permit Number RF-14-192765
Roof Drawing
49 9 7 6
23 33 s0
31 53 51
24
27 55 32 34 1 47
10 B 1 Z8 35
52
26 46 14
30 36 54 39 42
11 48
12 38 40 43
37 45
41 44
3 13
I%
oekw
INGIBIERING
4225 SW 71 Ave, Miami. FI 33155
Tel: 786-398-9179 Fax: 786-800-2627
a1 roofinspection(o).gmail.com
LAB CERTIFICATION #16-0510.15
SITE SPECIFIC INFORMATION
UPLIFT TEST — TAS #106
03/12/2020
Roofing Contractor DM ROOFING
Job Address 1411 NE 102 ST MIAMI SHORES, FL 33138
Owner's Name ROGERIO G CARRILLO &W MIGDALIA L
Type of Tile BARCELONA 900
Approximate Roof Height 12 feet Roof Pitch 4/12
Approximate Square Footage of Roof 33 ft2
Date Tested 03/11/2020
Contact Name DENIS
Number of Tests 55
Permit # RF-11-192765
Date Installed
Type of Access to Roof LADDER
Required Testing Force 35 Lbs
Testing Equipment F.G.E.100
Phone # 786-267-3066
LOCATION
# OF TEST
PASS
# OF TEST
FAIL
Corner
5 Tests
5 Pass
Test
Fail
Perimeter
9 Tests
9 Pass
Test
Fail
Field
33 Tests
33 Pass
Test
Fail
Ridge
8 Tests
8 Pass
Test
Fail
TOTAL
55 Tests
55 Pass
0 Test
0 Fail
IN ACCORDANCE WITH THE CRITERIA OF PROTOCOL PA 106, THIS ROOF ASSEMBLY HAS PASSED THE STATIC UPLIFT QUALITY CONTROL TEST. THIS TAS 106 TEST HAS BEEN PERFORMED IN FULL ACCORDANCE TO THE
REQUIREMENTS OF DADE COUNTRY, WITH NO DEVIATIONS. THIS REPORT IS NOT GUARANTEED IN CASE OF CASE OF NATURAL DISASTERS. THIS REPORT IT IS NOT VALID FOR INSURANCE CLAIMS.
N
�� � :i'i:� � JF • f�i
'te.N11'ENANg tL_EYVA•,��'
Job Address 1411 NE 102 ST MIAMI SHORES, FL 33138
Permit Number RF-v1-192765
Roof Drawing
a)
C-
ROOF ASSEMBLIES AND ROOFTOP STRUCTURES
1
Florida Building Code 5th Edition (2014) - LJ�4A
�V9
locity Hurricane Zone Uniform Permit Application Form. 1
.�' Section A (General Information)
Master tl . Process No. 1
I 1
Contractor's Name 1
Job Address �n] ik& _x
$L"
*� • • • 1
ROOF CATEGORY • • : • •.:. • I
❑ Low Slope ❑ Mechanically Fastened Tile MortaWAiheeive Set 7iley • •
••..�•
❑ Asphaltic Shingles ❑ Metal Panel/Shingles ❑ WoodATng1as/Shakes• •: • • •
❑ Prescriptive BUR-RAS 150
ROOF TYPE • • •
❑ New roof ❑ Repair ❑ Maintenance Reroofing • • : •tit Reco verinq • • • O •
ROOF SYSTEM INFORMATION • • • • • •
Low Slope Roof Area (SF) Steep Sloped Roof AREA (SSFA2.Uo Total (SF)Anato• • • •
1
Section B (Roof Plan) 1
Sketch Roof Plan: Illustrate all levels and sections, roof drains, scuppers, overflow scuppers and overflow drains. Include dimen-
sions of sections and levels, clearly identify dimensions of elevated pressure zones and location of parapets. 1
1
IN
�Nmin■OEM
■■
■■■■►\�INN
■■■■�\■■
■■
■■PIP,
■In■■
■■■■„■■■■V.�■■■■
■
//w■N��
i■■■■��■■■■■
INN
■■Ing
■�
■■I�■■■■■
��■�■■■■■■
I���■■■
■■■
■
■ice
�L�1
■����
0/till�■I/■
■■■�®
�.■■■■�■
■■
■
FLORIDA BUILDING CODE — BUILDING, 5th EDITION (2014) 15.37
Copyright to, or licensed by, ICC (ALL RIGHTS RESERVED); accessed by Eliezer Palacio on Jun 8, 2015 10:32:12 AM pursuant to License
Agreement. No further reproductions authorized.
1
1
1
1
1
1
1
1
i
El eaglevieww
LENGTH DIAGRAM
Total Line Lengths:
Ridges = 31 ft
Hips = 169 ft
Valleys = 13 ft
Rakes = 0 ft
Eaves = 285 ft
Premium Report
10/29/2019
Flashing = 7 ft
Step flashing = 44 ft
Parapets = 0 ft
...
.
......
...
. ..
.....
E
S
w
Note: This diagram contains segment lengths (rounded to the nearest whole number) over 5.0 Feet. In some cases, segment labels
have been removed for readability. Plus signs preface some numbers to avoid confusion when rotated (e.g. +6 and +9).
i£ 2008-2019 Eagle View Technologies, Inc. and Pictometry Intema0onal Corp. —All Rights Reserved — Protected by European Patent Application No. 10162199.3 — Covered by one or incre of U.S. Patent Nos. 8,078,436; 8,145,578; 8,170,840;
8,209,152; 8,515,125, 8,825,454; 9,135,737; 8,67U 061, 9,514,5v8, 8.P18,770; 8,542,80^; 4,244,589; 9,329,749; 9,599,466. Omer Patents Pen *ng.
PAGE 4
eag leviewT�
AREA DIAGRAM
Total Area = 3,266 sq ft, with 9 facets.
Premium Report
10/29/2019
...
.
......
...
. ..
.....
..
....
......
E
S
W
Note: This diagram shows the square feet of each roof facet (rounded to the nearest Foot). The total area in square feet, at the top
of this page, is based on the non -rounded values of each roof facet (rounded to the nearest square foot after being totaled).
C 2008-2019 Ld^,le View Techn, ales, Inc. and Plctometry 'nternational Corp. —Ali Rights Reserved — Protected by European Patent Application No. 10162199.3 — Covered by one or more of U.S. Patent Nos, 8,073,436; 8,145,578; 8,170,840;
8,209,152; 8,515,125; 8,825,454; 9,135,737; 8,670,961; 9,514,563; 8,816,770; 8,542,880; 9,244,589; 9,329,749; 9,599,466. Other Patents Pend''.ng.
PAGE 6
I
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
i
1
1
1
1
1
1
1
1
1
1
1
ROOF ASSEMBLIES AND ROOFTOP STRUCTURES
SECTION 1525
HIGH -VELOCITY HURRICANE ZONES UNIFORM PERMIT APPLICATION
Florida Building Code 5th Edition (2014)
High -Velocity Hurricane Zone Uniform Permit Application Form
INSTRUCTION PAGE
COMPLETE THE NECESSARY SECTIONS OF THE UNIFORM ROOFING PERMIT
APPLICATION FORM AND ATTACH THE REQUIRED DOCUMENTS AS NOTED BELOWi e e e
Roof System
Required Sections of the
Permit Application Form
Attachmentsdiequiled
See List Below '
Low Slope Application
A,B,C
1,2,3,4,5,6a�:..
Prescriptive BUR-RAS 150
A,B,C
4,5,6,r • • •
ASphai'
A,B,D
1,2,4,5 6 7
o 0 n rete or Clay ile
Metal Roofs
A,B,D,E
1,2,3,4,5,0ee
A,B,D
1,2,3,4,!'.a8,%0:
Wood Shingles and Shakes
A,B,D
1,2,4,5,P,7
Other
As Applicable
1,2,3,4,5,8,! •
ATTACHMENTS REQUIRED:
1.
Fire Directory Listing Page
2.
From Product Approval:
Front Page
Specific System Description
Specific System Limitations
General Limitations
Applicable Detail Drawings
3.
Design Calculations per Chapter 16, or if applicable, RAS 127 or RAS 128
4.
Other Component of Product Approval
5.
Municipal Permit Application
6.
Owners Notification for Roofing Considerations (Reroofing Only)
7.
Any Required Roof Testing/Calculation Documentation
ease..
e
. eeeae
e
aaeaa
ea
eaaaa
0
ease
a.a...
a
a'
e
aeeeea
e a
. a s e s .
00
aaae
15.36 FLORIDA BUILDING CODE — BUILDING, 5th EDITION (2014)
t I ! I 1 1 Copyright to, or licensed by, ICC (ALL RIGHTS RESERVED); accessed by Eliezer Palacio on Jun 8, 2015 10:32:12 AM pursuant to License
Agreement. No further reproductions authorized.
ROOF ASSEMBLIES AND ROOFTOP STRUCTURES
Florida Building Code 5th Edition (2014)
High -Velocity Hurricane Zone Uniform Permit Application Form
Section D (Steep Sloped Roof System)
Roof System Manufacturer:
Notice of Acceptance Numb
Minimum Design Wind Pressur s If A plicable (From RAS,1Z7 or Calculations):
P1: P1: P1: _�.,�
Deck Type:
Type Underlayment: O.5 1 �•" • �j`••�
R f Slope: 11 lug II
12 ....... _..
Insulation: •• •• �••••
Fire Barrier:
.. .
Ridge V nt'la ' ? Fastener Type & Spacing: C (�� 1 I•.�ji/�/
Adhesive Type:
1
Type Cap Sheet: 1?o1AGvxZ:-:TRj:1U<7)1
1
1
1
Mean Roof Height: Roof Covering: ,y�D`�N� �f'`n — , 1
�—�-b �► 1
Type &Size Drip
Edge:la?_)V
FLORIDA BUILDING CODE -- BUILDING, 5th EDITION (2014) 15.39
1 1 Copyright to, or licensed by, ICC (All. RIGHTS RESERVED); accessed by Eliezer Palacio on Jun 8, 2015 10:32:12 AM pursuant to License
Agreement. No further reproductions authorized.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
I
1
1
1
1
1
1
1
1
1
1
1
1
I
1
1
1
1
1
1
1
1
1
1
ROOF ASSEMBLIES AND ROOFTOP STRUCTURES
Florida Building Code 5th Edition (2014)
High -Velocity Hurricane Zone Uniform Permit Application Form.
Section E (Tile Calculations)
For Moment based tile systems, choose either Method 1 or 2. Compare the values for M, with the values from Mr. If the Mf values
are greater than or equal to the M, values, for each area of the roof, then the tile attachment method is acceptable.
t �MNethod 1 "Moment Based Tile Calculations Per RAS 127" 22
(P1 x k i�.d = � . - Mg: M„, �, - Product Approval M,
(P2Qx% _ - Mg: = M� I Product Approval Mf �*�
(P3.1 x� , _ _) - Mg: V - Mr31631 Product Approval M,
.••
Method 2 "Simplified Tile Calculations Per Table Below" • • • • • • • v
Required Moment of Resistance (M,) From Table Below Product Approval M, •
M, required Moment Resistance` • •
•
Mean Roof Height
Roof Slope
15'
20'
25'
30'
2:12
34.4
36.5
38.2
39.7
3:12
32.2
34.4
36.0
37.4
39.8
4:12
30.4
32.2
33.8
35.1
SZ.3
5:12
28.4
30.1
31.6
32.8
w3 .9
6:12
26.4
28.0
29.4
30.5
32.4
k 7:12
24.4
25.9
27.1
28.2
30.0
`Must be used in conjunction with a list of moment based tile systems endorsed by the Broward County Board of Rules and
Appeals.
For Uplift based tile systems use Method 3. Compared the values for F with the values for Fr. If the F values are greater than or
equal to the Fr values, for each area of the roof, then the tile attachment method is acceptable.
Method 3 "Uplift Based Tile Calculations Per RAS 127"
(P1: x L _ = _ x w: = _) - W: _ x cos O _ = F,, _ Product Approval F'
(P2:_ x L - = _ x w: = -) - W: x cos 0 - = F,� _ Product Approval F'
(P3:_ x L - = _ x w: = _) - W: x cos O _ = F„ _ Product Approval F
Where to Obtain Information
Description
Symbol
Where to find
Design Pressure
P1 or P2 or P3
RAS 127 Table 1 or by an engineering analysis pre-
pared by PE based on ASCE 7
Mean Roof Height
H
Job Site
Roof Slope
8
Job Site
Aerodynamic Multiplier
Product Approval
Restoring Moment due to Gravity
Ms
Product Approval
Attachment Resistance
Mf
Product Approval
Required Moment Resistance
Ma
Calculated
Minimum Attachment Resistance
F
Product Approval
Required Uplift Resistance
F,
Calculated
Average Tile Weight
W
Product Approval
Tile Dimensions
L = length W = width
Product Approval
All calculations must be submitted to the building official at the time of permit application.
15.40 FLORIDA BUILDING CODE - BUILDING, 5th EDITION (2014)
t t ' I I Copyright to, or licensed by, ICC (ALL RIGHTS RESERVED); accessed by Eliezer Palacio on Jun 8, 2015 10:32:12 AM pursuant to License
Agreement. No further reproductions authorized.
OR
5N'c,
FGOR
SECTION 1524
HIGH VELOCITY HURRICANE ZONES — REQUIRED OWNERS NOTIFICATION FOR ROOFING
CONSIDERATIONS
1524.1 Scope. As it pertains to the section, it is the responsibility of roofing contractor to provide the owner with
the required roofing permit, and to explain to the owner the content of the section. The provisions of Section R4402
govern the minimum requirements and standards of the industry for roofing system installations. AddUionav, the
following items should be addressed as part of the agreement between the owner ant the cogtractor.:tVdlAner's ......
initial in the designated space indicates that the item has been explained. •
00*0;: • :.....
2. Renailing wood decks: When replacing roofing, the existing wgatl•it deck MaV40ye to
be renailed in accordance with the current provisions of Section R4403. (The ro6fddck is us6ally •• ••••• ••••�
.
concealed prior to removing the existing roof system). .0:0a ..
.. .. ...0 ••••••
4. Exposed Ceiling: Exposed, open beam ceilings are where the underside of the:Mf decking • • •• •.
can be viewed from below. The owner may wish to maintain the architectural aDpoaraZce; therefore+ �••••
roofing nail penetration of the underside of the decking may not be acceptable. This provides t4vmtion of
maintaining the appearance.
6. Overflow scuppers (wall outlets): It is required that rainwater flows off so that the roof is
t overloaded from a buildup of water. Perimeter/edge wall or other roof extension may block this
discharge if overflow scuppers (wall outlets) are not provided. It may be necessary to install overflow
scuppers in accordance with the requirements of Sections R4402, R4403 and R4413.
nfs Signature Date Contractor Signature Date
1 q)1 Az • Lu4
c sk- CMS
Property Address Permit Number
Revised on 7/9/2009 LD;07/01/2015;
MIAMI DARE
MIAM[-D.4DE COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
11805 SW 26 Street, Room 208
BOARD AND CODE ADMINISTRATION DIVISION
Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA)
www.miamidade.Qov/economy
Boral Roofing, LLC
7575 Irvine Center Drive, Suite 100
Irvine, CA 92618
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of coxstrLIOtion materta s. The • • • • • •
documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Controj ��jtpn to be •,
used in Miami -Dade County and other areas where allowed by the Authority Having Jurisdic'ttdtitAHJ). '
•••••• •
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County.'t'btl Wt Coit"l.$ection'
(in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reserve the rioght to have this • •: 0 •.
product or material tested for quality assurance purposes. If this product or material fails to peO 'il; in the aje�pted •
manner, the manufacturer will incur the expense of such testing and the AHJ may immediatelX j:�gke, modify, or . •
suspend the use of such product or material within their jurisdiction. RER reserves the right:o rt4ke this acceptance,...:.
if it is determined by Miami -Dade County Product Control Section that this product or material fails to meet t e •
requirements of the applicable building code. • • • • •
This product is approved as described herein, and has been designed to comply with the Florida Building MUM
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Barcelona 900 Concrete Roof Tile
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revises NOA No. 16-0711.01 and consists of pages 1 through 7.
The submitted documentation was reviewed by Freddy Semino 19
NOA No.: 18-0509.15
Expiration Date: 04/26/22
Approval Date: 06/28/18
Page 1 of 8
ROOFING ASSEMBLY APPROVAL
Category: Rooting
Sub -Category: Roofing Tiles
Material: Concrete
1. SCOPE
This approves a roofing system using Barcelona 900 Concrete Roof Tile, as manufactured Boral Roofing LLC
in Lake Wales, FL and described this Notice of Acceptance. For locations where the pressure requirements, as
determined by applicable Building Code, do not exceed the design pressure values obtained by calculations in
compliance with RAS 127 using the values listed in the installation section herein. The attachment calculations
shall be done as a moment based system. •
••••••
2. PRODUCT DESCRIPTION
• • •
...... . ......
Manufactured by
Test
Proijuct • 000000
Applicant Dimensions
Specifications
...
Des.�riptfon • • • • • •
Barcelona 900 Length = 17"
TAS 112
00000
High profile, interloekirg! Qne-p4c�,•'S;shapo&, • • •
Width = 13"
Type — la
high-pressure extrudM dblicrete rcto"Me • •' •, •
'/2" thick
equipped with three i-aiMUes. For ddrect deck ••
. . . . .
or battened nail -on, niechjm.cally *sta-.....
ed, • •
mortar set or adhesi\;44et *plica4ions• ; • • • •;
•
Trim Pieces Length: varies
TAS-112
Accessory trim, boosted Barcelona, concrete
Width: varies
roof pieces for use at hips, rakes, ridges and
varying thickness
valley terminations manufactured for each tile
profile.
2.1 PRODUCTS MANUFACTURED BY OTHERS
Product Name
ICP Adhesives Polysc0" AH-160
TILE BONDTM Roof Tile Adhesive
DAP Foam Touch N Seal
StormBond"8' 2 Roof Tile Adhesive
Product Description
Two component polyurethane
foam adhesive.
Single component polyurethane
foam roof tile adhesive.
Two component polyurethane
foam adhesive.
2.2 MANUFACTURING LOCATION
2.2.1. Lake Wales, FL
Manufacturer
(With Current NOA)
ICP Adhesives and Sealants, Inc.
The Dow Chemical Company
DAP Foam Inc.
NOA No.: 18-0509.15
Expiration Date: 04/26/22
Approval Date: 06/28/18
Page 2 of 8
2.3 SUBMITTED EVIDENCE:
Test Agency
Test Identifier
Test Name/Report
Date
Redland Technologies
7161-03
Static Uplift Testing
Dec. 1991
Appendix III
TAS 102 & TAS 102(A)
Redland Technologies
7161-03
Wind Tunnel Testing
Dec. 1991
Appendix II
TAS 108(Nail-On)
Redland Technologies
P0402
Withdrawal Resistance
• Sep.t. 1993
Testing of screw v$. smooth
• • • • • •
shank nails '
'
Redland Technologies
Letter Dated Aug. 1,
Wind Tunnel 're';f tA'
' Aug. 1994
1994
TAS 108 (NaitUn�:*
�� �••••�
Redland Technologies
P0631-01
Wind Tunnel TestifR��
J u1y 1994 • • • • •
TAS 108(Mortaf$tf�
�••� •••••�
Professional Service Industries, Inc.
IC-1320-94
.. ..
Physical Propj�s..
.... ......
Feb. 1995 .'
TAS 112: ' :
....:.
The Center for Applied Engineering, Inc.
25-7688-3
TAS 101. (Adhesive hey
June 1996 :....:
25-7688-10
TAS 101 (Mortar Set)
•J}j;•1996
The Center for Applied Engineering, Inc.
25-7688-5
Static Uplift Testing
June 1996
TAS 102
(3" Headlap, Nails, Direct
Deck, New Construction)
The Center for Applied Engineering, Inc.
25-7688-4
Static Uplift Testing
June 1996
TAS 102
(4" Headlap, Nails, Clips)
Celotex Corporation
520111-3
Static Uplift Testing
Dec. 1998
Testing Services
520191-2-1
TAS 101
March 1999
Walker Engineering, Inc.
Calculations
Aerodynamic Multiplier
09/01/16
Walker Engineering, Inc.
Evaluation
Restoring Moments Due to
09/01/16
Calculations
Gravity
American Test Lab of South Florida
RT0617.03-16
TAS 112
06/29/16
PRI Construction Materials Technologies
COPO-002-02-10
Static Uplift Testing
10/12/2016
TAS 101 (Adhesive Set)
PRI Construction Materials Technologies
COPO-002-02-02
Static Uplift Testing
10/12/2016
TAS 101 (Adhesive Set)
PRI Construction Materials Technologies
COPO-002-02-01
Static Uplift Testing
10/12/2016
TAS 101 (Adhesive Set)
NOA No.: 18-0509.15
MIAMI•DADECOUNTY Expiration Date: 04/26/22
Approval Date: 06/28/18
Page 3 of 8
3. LIMITATIONS:
3.1 Fire classification is not part of this acceptance.
3.2 For mortar or adhesive set tile applications, a static field uplift test in accordance with TAS 106 may
require, refer to applicable building code.
3.3 Applicant shall retain the services of a Miami -Dade County Certified Laboratory to perform quarterly test in
accordance with TAS 112, appendix `A'. Such testing shall be submitted to the Department of Regulatory
and Economic Development — Product Control Section for review.
3.4 Minimum underlayment shall be in compliance with the applicable Roofing Applications Standards listed
section 4.1 herein.
3.5 30/90 hot mopped underlayment applications may be installed perpendicular to the roof slope unless stated
otherwise by the underlayment material manufacturers published literature.
3.6 This acceptance is for wood deck applications. Minimum deck requirements shall be i ,,complianeQNith • • • • • •
applicable building code. •
* 0 0 V O . ......
......
4. INSTALLATION 000000
• • •
...... . .. ....
. ..
4.1 Barcelona 900 Concrete Roof Tile and its components shall be installed in strict. eompliance wrthegoofing••• •
Application Standard RAS 118, RAS 119, and RAS 120. ;";•; '
4.2 Data For Attachment Calculations : • • •: • • • • • : •
Table 1: Average Weight (W) and Dimensions (I x w )
Tile Profile
Weight-W (Ibf)
Length -I (ft)
Width-w (ft)
Barcelona 900
11.5
1.417
1.08
Table 2: Aerodynamic Multipliers - It (ft3)
Tile Profile
A (ft3)
Batten Application
j\ (ft3)
Direct Deck Application
Barcelona 900
0.286
0.301
Table 3: Restoring Moments due to Gravity - M9 (ft-lbf)
Tile
Profile
2":12"
311:12"
4":12"
5":12"
6":12"
7":12" or
greater
Barcelona
900
Battens
Direct
Deck
Battens
Direct
Deck
Battens
Direct
Deck
Battens
Direct
Deck
Battens
Direct
Deck
Battens
Direct
Deck
6.19
7.07
6.19
7.00
6.19
6.90
6.06
6.76
5.92
6.60
5.76
6.42
NOA No.: 18-0509.15
Expiration Date: 04/26/22
Approval Date: 06/28/18
Page 4 of 8
Table 4: Attachment Resistance Expressed as a Moment - Mf (ft-lbf)
for Mechanically Attached Systems
Tile
Fastener Type
Direct Deck
Direct Deck
Battens
Profile
(min 15/32"
(min. 19/32"
plywood)
plywood)
•
Barcelona 900
2-10d Ring Shank Nails
28.6
V.2.•.
19.4 ••
1-10d Smooth or Screw Shank
5.1
6.16
:...2.8
Nail
••���•
•�
2-10d Smooth or Screw Shank
6.9
9.z..
1.3 ;•
Nails
'....'
:""' ..
1 #8 Screw
20.7
20.7•..
. 0148.1 ..
2 #8 Screw
43.2
43.2• •
00429.8 • •
1-10d Smooth or Screw Shank
23.1
21.1:0:
19.0
Nail Field Clip):•••0•
1-10d Smoothor Screw Shank
29.3
2�,.�• ;
44.0 ;•
Cl
;•.
2-10d Smooth or Screw Shank
27.6
27.6
38.6
Nails Field Clip)
2-10d Smooth or Screw Shank
38.1
38.1
41.8
Nails Eave Clip)
Table 5: Attachment Resistance Expressed as a Moment - Mf (ft-lbf)
for Mechanically Attached Systems
Tile
Fastener Type
Direct Deck
Direct Deck
Battens
Profile
(min 15132"
(min. 19/32"
plywood)
plywood)
Barcelona 900
2-10d Ring Shank Nails'
33.1
48.1
45.2
1 Installation with a 4" the headlap and fasteners are located a min. of 2'/2" from head of tile.
NOA No.: 18-0509.15
Expiration Date: 04/26/22
Approval Date: 06/28/18
Page 5 of 8
Table 6: Attachment Resistance Expressed as a Moment Mf (ft-Ibf)
for Two Paddy Adhesive' Set Systems
Tile
Tile Application
Minimum Attachment
Profile
Resistance
Barcelona 900
Tile BondTMOne Component Roof Tile Adhesive
29.32
ICP Adhesives Polyset® AH-160 two -component foam
29.33
DAP Foam Touch N Seal StormBond®2 Roof Tile Adhesive
664
1 See manufactures component approval for installation requirements.
2 TILE BONDTm Roof Tile Adhesive; Average weight per paddy 10.7 grams.
. ..
3 ICP Adhesives and Sealants, Inc.'s ICP Adhesives Polyset AH-160; Average weight per paddy I:gram.
4 DAP Foam Touch N Seal StormBond® Roof Tile Adhesive Two -Component; Average wei
••�•
add .$ rams. ..
.... .
. ......
Table 7: Attachment Resistance Expressed as a Moment - Mf
•IP••;•••
for Single Paddy Adhesive Set Systems
00
...... .
Tile
Tile Application
6nimum Aitacbment
Profile
. .
• • Resisianig
• .
Barcelona 900
ICP Adhesives Polyset® AH-160 two -component foam
66.5• • •
ICP Adhesives Polyset® AH-160 two -component foam
38.76
DAP Foam Touch N Seal Storm Bond® 2
63 7
DAP Foam Touch N Seal StormBondV 2
828
5 Large paddy placement
of 63 grams
6 Medium paddy
placement of 24 grams
7 Medium paddy
placement of 30 grams
8 Large paddy placement
of 60 grams
Table 8: Attachment Resistance Expressed as a Moment - Mf (ft-Ibf)
for Mortar Set Systems
Tile
Profile
Tile
Application
Attachment
Resistance
Barcelona 900
Mortar Set9
24.5
9 Seespecific mortar manufacturers Notice of Acceptance
NOA No.: 18-0509.15
1111FMIAMMADE Expiration Date: 04/26/22
.. ' ,.S -
Approval Date: 06/28/18
Page 6 of 8
...
.
.
...
5. LABELING
5.1 All tiles shall bear the imprint or identifiable marking of the manufacturer's name or logo as detailed
below, or following statement: "Miami -Dade County Product Control Approved".
LABEL FOR BARCELONA 900 TILE LAKE WALES FLU PLANT 2 * • • • * •
......
LOCATED UNDERNEATH TILE 9.6 • •
...... . ......
6. BUILDING PERMIT REQUIREMENTS •"•"•
. . ......
6.1 Application for building permit shall be accompanied by copies of the following 0 0 0 0 0 .
6.1.1 This Notice of Acceptance. .. .. .• •
... ......
6.1.2 Any other documents required by the Building Official or applicable bui &&rode in order to . •
properly evaluate the installation of this system. : • : • . ......
. . ......
.. . . .. . .
. .
NOA No.: 18-0509.15
Expiration Date: 04/26/22
Approval Date: 06/28/18
Page 7 of 8
PROFILE DRAWING
NAIL HOLES
UNDERLOCK
LOCK
131,
BARCELONA 900 CONCRETE ROOF TILE
END OF THIS ACCEPTANCE
......
•
. .
. .
......
NOA No.: 18-0509.15
Expiration Date: 04/26/22
Approval Date: 06/28/18
Page 8 of 8
MTAMI= MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) Miami. Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T (786)315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.¢ov/economy
ICP Adhesives and Sealants, Inc.
12505 NW 44"' Street
Coral Springs, FL. 33065
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER -Product Control Fection to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdictit)n (f VJ). • • • • • • • • • • •
•• • • • •'
This NOA shall not be valid after the expiration date stated below. The Miami -Dade CountyAoduct C&1?o1'8ectiog**,:.
(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the•rig6 ro have this produc• • •
or material tested for quality assurance purposes. If this product or material fails to perform irtif1v%ceptelmjtMer, the* •
manufacturer will incur the expense of such testing and the AHJ may immediately revoke, mddi", or suspend the use •: • • •
of such product or material within their jurisdiction. RER reserves the right to revoke %*S*1ccept:nre,%f it is""'
•• •• •••• ••••••
determined by Miami -Dade County Product Control Section that this product or material fails to meet the requirements •
. . .
of the applicable building code.:00•
. . ......
This product is approved as described herein, and has been designed to comply with t* Fjeyda Building Codg • • • •
including the High Velocity Hurricane Zone of the Florida Building Code. " ' •. •
.. .
DESCRIPTION: ICP Adhesives Polyset® AH-160
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for
sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews NOA 16-0315.01 and consists of pages 1 through 11.
The submitted documentation was reviewed by Alex Tigera.
NOA No.: 17-0322.03
Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 1 of 11
ROOFING COMPONENT APPROVAL:
Category: Roofing
Sub Category: Roof tile adhesive
Materials: Polyurethane
SCOPE:
This approves ICP Adhesives Polysete AH-160 as manufactured by ICP Adhesives and Sealants, Inc, as described
in this Notice of Acceptance. For the locations where the design pressure requirements, as determined by applicable
building code, do not exceed the design pressure values obtained by calculations in compliance with Roofing
Application Standard RAS 127. For use with approved flat, low, and high profile roof tile systems using ICP
Adhesives Polyset' AH-160.
......
PRODUCTS MANUFACTURED BY APPLICANT:
of ••••••
•
Product Dimensions Test Product'l5tiMptioi? • • • • • •
Specifications 000000
; ....
ICP Adhesives N/A TAS 101 Two component polywsweane foam adhesive....
Polyset'AH-160 • • • • • • • • • • • • • •
ICP Adhesives Foam N/A Dispensing Equipment • • • • • • • • • • •: •
Dispenser RTF1000 •
. . . . ......
ICP Adhesives ProPack* N/A Dispensing Equipmenj • • • ; • • • •
30 & 100 •
PRODUCTS MANUFACTURED BY OTHERS:
Any Miami -Dade County Product Control Accepted Roof Tile Assembly having a current NOA which list attachment
resistance values with the use of ICP Adhesives Polyset' AH-160 roof tile adhesive.
MANUFACTURING LOCATION:
1. Tomball, TX.
PHYSICAL PROPERTIES:
Property
Density
Compressive Strength
Tensile Strength
Water Absorption
Moisture Vapor Transmission
Dimensional Stability
Closed Cell Content
Test
Results
ASTM D 1622
1.6 lbs./ft.'
ASTM D 1621
18 PSI Parallel to rise
12 PSI Perpendicular to rise
ASTM D 1623
28 PSI Parallel to rise
ASTM D 2127
0.08 Lbs./Ft2
ASTM E 96
3.1 Perm / Inch
ASTM D 2126
+0.07% Volume Change @ -40' F
+6.0% Volume Change @158°F.,
weeks
ASTM D 2856
86%
2 weeks
100% Humidity, 2
Note: The physical properties listed above are presented as typical average values as determined by
accepted ASTM test methods and are subject to normal manufacturing variation.
NOA No.: 17-0322.03
MIAMI•DADE COUNTY Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 2 of 11
EVIDENCE SUBMITTED:
Test Agency
Center for Applied Engineering
Miles Laboratories
Polymers Division
Ramtech Laboratories, Inc.
Southwest Research Institute
Trinity Engineering
Celotex Corp. Testing Services
LIMITATIONS:
Test Identifier
#94-060
257818-1PA
25-7438-3
25-7438-4
25-7438-7
25-7492
NB-589-631
9637-92
01-6743-011
01-6739-062b[ 1 ]
7050.02.96-1
P36700.04.12
P39740.02.12
528454-2-1
528454-9-1
528454-10-1
520109-1
520109-2
520109-3
520109-6
520109-7
520191-1
520109-2-1
Test Name/Report
TAS 101
TAS 101
SSTD 11-93
SSTD 11-93
SSTD 11-93
ASTM D 1623
ASTM E 108
'..'
ASTM E 108
•••�••
ASTM E 84
.•••••
TAS 114
•�:••:
ASTM D 1623
•
TAS 101
TAS 123
TAS 101
TAS 101
TAS 101
Date
04/08/94
12/ 16/96
10/25/95
11/02/95
12/12/95
02/01 /94
......
0Z0/93
11/16/94
.
03:14 §9.
04/ 18/11
02�21/12
......
10/23 W
12/28/98
03/02/99
I. Fire classification is not part of this acceptance. Refer to the Prepared Roof Tile Assembly for fire rating.
2. 1CP Adhesives Polyset' AH-160 shall solely be used with flat, low, & high tile profiles.
3. Minimum underlayment shall be in compliance with the Roofing Application Standard RAS 120.
4. Roof Tile manufactures acquiring acceptance for the use of ICP Adhesives Polyset' AH-160 roof tile adhesive
with their tile assemblies shall test in accordance with TAS 101.
5. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and
Rule 61 G20-3 of the Florida Administrative Code.
NOA No.: 17-0322.03
Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 3 of 11
INSTALLATION:
1. ICP Adhesives Polyset' AH-160 may be used with any roof tile assembly having a current NOA that lists
attachment resistance values with the use of ICP Adhesives PolyscCAH-160.
2. ICP Adhesives Polyset' AH-160 shall be applied in compliance with the Component Application section and the
corresponding Placement Details noted herein. The roof tile assembly's adhesive attachment with the use of ICP
Adhesives Polyset' AH-160 shall provide sufficient attachment resistance to meet or exceed the resistance value
determined in compliance with Miami -Dade County Roofing Application Standards RAS 127. The adhesive
attachment data is noted in the roof tile assembly NOA.
3. ICP Adhesives Polyset" AH-160 and its components shall be installed in accordance with Roofing Application
Standard RAS 120, and ICP Adhesives and Sealants, Inc.'s Operating Instruction and Maintenance Booklet.
4. Installation must be by a Factory Trained 'Qualified Applicator' approved and licensed by ICP Adhes3��3nd
Sealants, Inc. ICP Adhesives and Sealants, Inc. shall supply a list of approved applicatorso•tlif authority having "`":`
jurisdiction. ...... •.....
5. Calibration of the ICP Adhesives Foam Dispenser RTF 1000 dispensing equipment is regdited before apl3lication ; •;
of any adhesive. The mix ratio between the "A" component and the "B" component shaU'l3e•?aintai4wd between • •
1.0-1.15 (A): 1.0 (B). "`• ""`
...... . .. .....
6. ICP Adhesives Polyset' AH-160 shall be applied with ICP Adhesives Foam Dispenser RTN40 or rC40606 0000:6
Adhesives ProPack' 30 & 100 dispensing equipment only. • • • • • • •
. . . . ......
7. ICP Adhesives Polyset' AH-160 shall not be exposed permanently to sunlight. ; • • • • • •
8. Tiles must be adhered in freshly applied adhesive. Tile must be set within 1 to 2 minutes after tCP A0hgs'iv;s •
Polyset' AH-160 has been dispensed. 0000
9. ICP Adhesives Polyset' AH-.160 placement and minimum patty weight shall be in accordance with the
'Placement Details' herein. Each generic tile profile requires the specific placement noted herein.
NOA No.: 17-0322.03
Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 4 of 11
Table 1: Adhesive Placement For Each Generic Tile Profile
Minimum Paddy Contact
Minimum Paddy Gram
Tile Profile
Placement Detail
Area
Weight
Eave Course - Flat, Low, High
All Eave Course
17-23 sq. inches
45-65
Profiles
Flat, Low, High Profiles
#1
17-23 sq. inches
45-65
Flat Profile
#2
10-12 sq. inches
30
Low Profile
#2
12-14 sq. inches
30
High Profile
#2
17-19 sq. inches
30
Flat, Low, High Profiles
#3
Two Paddys: 8-9 sq. inches at
2 grarn9poi:paddyeee
head of tile 9-11 sq. inches at*,,.**:
overlap
•
••••••
Two -Piece Barrel (Cap Tile)
Two Piece
2 Beads (1 each longitudinal
7 grams peer bead �..
edge) 20-25 sq. inches each •
e • •
• • • • • •
bead
• • • • •
•
.
.•.. . .. ...
Two Piece Barrel (Pan Tile)
Two Piece
65-70 sq. inches
grams upderpan•••
a
eer34
•.
•
• . •.••••
• • • • •
LABELING: " •
All approved products listed herein shall be labeled and shall bear the imprint or identifiable marking of the
manufacturer's name or logo and following statement: "Miami -Dade County Product Control Approved" or the Miami -
Dade County Product Control Seal as shown below.
BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or applicable building code in order to properly evaluate the installation of this
system.
NOA No.: 17-0322.03
Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 5 of 11
ADHESIVE PLACEMENT DETAIL # 1
lWltlu•u,Itmastic c""Wi. � Paddyrti•nsaiNTSO
{r1►r =lrad/.
(iNtladaymeas � °
•4 ` }t
+ti 1•irt
iasta a apliond .� ° },,.i
ID
r
EMwClhsura '`.�"f
Nell thrDw1h plastic mne"d
Iwhen reQrirem
I
I -,Ns apt, Mal
ItIle
zrn.
.,N, -` diva dasrrn
EaRecaursa •—Resd•
KA gkw*ugfi plwstit
("en forltd^"d) or
Idl t8ero1•th 1eF
a.
Unt6a'tyyntwtt oi`
2
�
:1n. wlda
aptl•n9t `�
Ea►» caum
ti
Pasch
k
Weephok
'tWc!•srre
is [Fall 1,,.
Drip •d"
. • 10 •
APPROVED
Flat/Low Profile Tile
1. Starting at the cave course, apply a minimum 2"
(50.8 mm) x 10" (254 mm) x 1" (25.4 mm) foam
paddy onto the underlayment positioned as shown,
under the strengthening rib closest to the overlock
of the tile being set.
2. Continue in same manner. Insure approximately 17
(109.7 cm2) — 23 (148.4 cmZ) square inch adhesive
contact with the underside of the tile.
.••••.
••••••• • ••••••
••••••
041414100
Medium Profile / Double Patl•'fiile • •••••
•••••• • •• •••• •• •
1. Starting at the cave course apply a mfnftl!M% 2" • •• •; •
(50.8 mm) x 10" (254 - is F. (25.4 mi �) foam000000
paddy onto the underlaymegpositicpW*"shown •
under the pan portion of Wti=e closest W the ; • • • •;
overlock of the tile being set. ••:•••
2. Continue in same manner. Insure approximately 17
(109.7 cm2) — 23 (148.4 cm2) square inch adhesive
contact with the underside of the tile.
High Profile / Single Pan Tile
1. Starting at the cave course, apply a minimum 2"
(50.8 mm) x 10" (254 mm) x 1" (25.4 mm) foam
paddy onto the underlayment positioned as shown
under the pan portion of the the closest to the
overlock of the tile being set.
2. Continue in same manner. Insure approximately 17
(l 09.7 cm2) — 23 (148.4 cm') square inch adhesive
contact with the underside of the tile.
NOA No.: 17-0322.03
Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 6 of 11
ADHESIVE PLACEMENT DETAIL # 2
wn tbr6unh ptaala c+ma vndldy RM"" T"
Owhw MQU"d')t
�letlaaisyrnofit �\�/' „
s4 71 x
each iapli.n.I /"��
5awtaursr �°�-�`
u
.tom ✓
ate. sip,. N�-
Flat/Low Profile Tile
Starting at the cave course, apply a minimum 2" (50.8
mm) x 10" (254 mm) x 1" (25.4 mm) foam paddy
onto the underlayment positioned as shown under the
strengthening rib of the tile closest to the overlock of
the tile being set. Insure approximately 17 (109.7 cm 2)
— 23 (148.4 cm') square inch adhesive contact with the
underside of the tile.
2. At the second course, apply a minimum Y (50!8mm)
x 7" (177.8 mm) x 1 " (25.4 rpm) Rjpm paddy onto the
• . • • ; •
underlayment positioned as sllMvn Under ihe...
' •
strengthening rib closest to tiles W'Aock of the tile
being set. • •
•
.... .
.....
3. Continue in same manner. Ins}lr"glaproxitiatel}, 10"
.....
(64.5 cm2) - 12(77.4 cm2) squaS`e rich ad1v*vo •
• • • • • •
contact with the underside of the•tile.
•
. . . .
......
Medium Profile / Double Pan Tire . • •
Starting at the cave course, apply a minimum 2" (50.8
mm) x 1.0" (254 mm) x 1" (25.4 mm) foam paddy
onto the underlayment positioned as shown under the
pan portion of the tile closest to the overlock of the
tile being set. Insure approximately 17 (109.7 cm2) —
23 (148.4 cm2) square inch adhesive contact with the
underside of the tile.
2. At the second course, apply a minimum 2" (50.8mm)
x 7" (177.8 mm) x 1" (25.4 mm) foam paddy onto the
underlayment positioned as shown under the pan
portion of the tile closest to the overlock of the tile
being set.
3. Continue in same manner. Insure approximately 12"
(77.4 cm2) - 14 (90.3 cm2) square inch adhesive
contact with the underside of the tile.
(Instructions continued on next page)
NOA No.: 17-0322.03
Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 7 of 11
ADHESIVE PLACEMENT DETAIL # 2 (CONTINUED)
kaA dhreughv u * earment--,
f"em rida`rl�rrd1? f P.ddy tS.raaMA Till
Undwiar'ywrwrrt . ""-.
NZ f.
smarts optimal
r �
�.
10fin.
1, s�
41n. Ortpad"
APPROVED
High Profile / Single Pan Tile
Starting at the eave course, apply a minimum 2" (50.8
mm) x 10" (254 mm) x 1" (25.4 mm) foam paddy
onto the underlayment positioned as shown under the
pan portion of the tile closest to the overlock of the
tile being set. Insure approximately 17 (109.7 cm') —
23 (148.4 CM2) square inch adhesive contact with the
underside of the tile.
At the second course, applya minimum 4P(50.8mm) • • •; •
x 7" (177.8 mm) x 1" (25.4 mrn) Roam p;00X:4ito the
underlayment positioned as'Sht it Linde? the pan :***a:
portion of the tile closest to'tWoverlock of the tile : :a***:
being set. • • • • • •
•aa• . •aaa•
Continue in same manner. ."..;pprJj1i:;ly l 7" :::::a
(109.7 cm2) - 19 (122.6 cm244;yua6e inch adhesive •
contact with the underside & the t►le. • • • • • •
NOA No.: 17-0322.03
Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 8 of 11
ADHESIVE PLACEMENT DETAIL # 3
Nall through plastic cernent. Paddy (between tiles)
!when requiredi
Battens optional
Paddyiundertle!
single paddy
an top of tfle
axdin.
�` singglepad
under Ulp
shrgle paddy
on mderlayment. *t2X 411
10 in..ti
+"Z in
EaveClosure
HattLow Profile Tile
Nag through plastic cement Single paddy under tille.
twhen required!
Paddy (between tilesi
Battens Paddy fonder tile}
optional
Single WdY
an top of tie `
4x41n. �+ 2x4in.
S[rwlepaddyon
unddertayment
10 in. 2 in.
y Ear"Closure
Eave Course Fascia
Medium Profile Tile
On the eave course only, apply a minimum 2" (50.8
mm) x 10" (254 mm) x 1" (25.4 mm) foam paddy
onto the underlayment positioned as shown, under
the strengthening rib for flat tile or under the pan
portion of the tile for low or high profile tile closest
to the overlock of the tile being set. Leave
approximately 4" (101.6 min) up from the eave
edge free of foam to prevent the expanded adhesive
from blocking the weep holes. Insure
approximately 17-23 in2 (109.7-148.4 cm2� of
adhesive contact with the underside Qf riv-Sle ......
•••••• • ••••••
Apply a 4" (101.6 mm) Y. 4.:(.1� 1.6 mm)•x 1 " (25.4 •
mm) foam paddy onto toe andjrlayni;ej-4 j4�t below •
the second course line poSitfdhed foam paddy • •: • • •
under the strengthening flhfdr flat tile, erilrider V • •
. ......
pan portion of the tile, ctoses. .tto the uriaerlock for •
the second course the too�be rns3alled..Insure ••�•;
approximately 8-9 in' (5.1.6-5j .1 cm�•d1•ddhesivq,
contact with the undersih oT tle tile.. .. • •:
(Instructions continued on next page)
NOA No.: 17-0322.03
Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 9 of 11
ADHESIVE PLACEMENT DETAIL # 3 (CONTINUED)
Nail through plutic c
Single paddy under tile
twhen requ ired)
Paddylbetweentiles I
Battens "
optional
Paddy (under tile)
�Singlepaddy
on unfixrtayanen
.mow
f'4 x 4 in.
t
Single 2 x 4 in.
ddddyy on
pofnle
Eaw Course
asda
Y
weq*ole
Coln.
Erie downs
�2in.
Dripedge
High ProffleTll4a
3. Also apply a 2" (50.8 mm) x 4" (10 1.6 mm) x 1/4"
(19 mm) paddy on top of the eave course tile
surface as shown, on top of the strengthening rib
for flat tile or on top of the pan portion of the tile,
closest to the underlock of the first course of tile.
Install second course of tile. Insure approximately
9 (58.1 cm') - 11 (71cm') square inch adhesive
contact with the underside of the tile at the overlap
and 7 (45.2 cm) - 9 (58.1 cm'-) square inch
adhesive contact with the underside of:beAs at
the head of the tile. Contipue 6n same manner.
• • •
••••••
• • •
NOA No.: 17-0322.03
Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 10 of 11
ADHESIVE PLACEMENT DETAIL
TWO PIECE BARREL
t) Place enough adhesive to achieve 65 to 70 sq in. Steep pitch applications
in contact with the pan tile. (when required)
2) Turn covers upside down. Place adhesive in
to t in.from outside edge of cover tile.
Then install the tile. Ensure 20 to
25 4. In. contact area.
IUnderlayment
Eave closure
(motar shown)
Fascia
Remove top portion of the eave course cover tile. Abut to second course of
pan tiles. Ensure eave end of pan and cover tiles are flush at eave line.
Two Piece Barrel - High Profile Tile
Two Piece Barrel (Cap and Pan) Tile
1. Starting at the eave course, apply a minimum 2"
(50.8 min) x 10" (254 mm) x 1" (25.4 min) foam
paddy onto the underlayment positioned as
shown under two adjacent pan tiles. Support cave
tiles from rocking until adhesive has a chance to
cure.
Continue in same manner bringing t$vapla
courses up toward the rM ee I insure • ****:a
approximately 65 (419.40 inn)* 70 ( 5i !Ei em2) • • •„•
square inch adhesive co"4q. yith the uiulerside e
of the pan tile. ....
.•.•••
.... . .....
Turn covers upside dowYr exh;sing tre jftid;rpide• •' • •
of the tile. Apply a mini"Um? 1 " (25.4•ftttil) x 10" • • • *0
(254 mm) bead of adheZ'bl!"Cectly on tAe inner •.
edge of each side of the coverlile. Learn: • • • •• • •
approximately 3/4" (19 ;n tQ 1 " (2� .4 gym) ; • • • •
from the outside edge of the tile, invJ'arQ, tc of
foam to allow for expansion.
4. Turn cover tile over after foam is applied and
place onto pan tile course. Insure a minimum of
20 (129 cm'-) - 25 (161.3 cm2) square inch
contact area on each side of the cover tile to the
pan tile. Continue in same manner. Trim away
any cured exposed foam adhesive. Pointing of
longitudinal edges of the cover tiles are
considered optional.
5. When additional nailing is required, 2" (50.8
min) x 4" (101.6 min) nailers or the tie wire
system using galvanized, stainless steel, or
copper wire and compatible nails may be used.
END OF THIS ACCEPTANCE
NOA No.: 17-0322.03
Expiration Date: 05/10/22
Approval Date: 04/27/17
Page 11 of 11
MIAMNDIADE
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
11905 SW 26 Street, Room 208
BOARD AND CODE ADMINISTRATION DIVISION
Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA)
www.miamidade.aov/economy
Polyglass USA Inc.
1111 W. Newport Center Drive
Deerfield Beach, FL 33442
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control ►V,; 1JiD1a to be
used in Miami -Dade County and other areas where allowed by the Authority Having Jurisdiction OjiJ).
""'
• • • . .
.....•
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County P'1Utmttf Control Section
•
•
(in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reserve the fithi to have this
• • • •
product or material tested for quality assurance purposes. If this product or material fails to pe-r `or � to the ieeepttd
• •
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately,;("(&, modifypr
..:..'
suspend the use of such product or material within their jurisdiction. RER reserves the right to r%Qre this aceQp[ance,
• • • • • •
if it is determined by Miami -Dade County Product Control Section that this product or material•feils4 o meet the
• •
requirements of the applicable building code.
:0
This product is approved as described herein, and has been designed to comply with the Floria Building Code
• • • •
•
including the High Velocity Hurricane Zone of the Florida Building Code. •
DESCRIPTION: Polyglass Polystick Underlayments
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed
by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then
it shall be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews and revises NOA No.15-0410.04 and consists of pages I through 8.
The submitted documentation was reviewed by Freddy Semino. 0
NOA No.: 17-0614.22
Expiration Date: 09/13/21
Approval Date: 07/06/17
Page 1 of 8
ROOFING COMPONENT APPROVAL
Category: Roofing
Sub -Category: Underlayment
Material: SBS , APP Self -Adhering Modified Bitumen
PRODUCTS DESCRIPTION:
Product
Polystick IR-Xe
Mam facluring
Location # 1 & 42
Polystick Dual Pro
Manufacturing
Location #2
Polystick Tile Pro
Manufacturing
Location #2
Polystick TU Max
Manufacturing
Location #1 & #2
Polystick TU P
Manufacturing
Location #2
Polystick TU Plus
(Surface Printing)
Manufacturing
Location #1 & #2
Polystick MTS
Manufacturing
Location #2
Polystick NITS Plus
Manufacturing
Location #2
Elastoflex S6 G
Manufacturing
Location #2
Test Product
Dimensions
Specification Description
65' x 3'3-1/8"
ASTM D 1970 A fine granular/sand top surface self -adhering, APP
Or 65' x 3'
polymer modified, fiberglass reinforced, bituminous
60 mils thick
sheet material for use as an underlayment i4sloped roof
sees..
assemblies. Designed as an ice.& rain shield. • • • • • •
•
6 P x 3'3 '/s"
*see .
TAS 103 and A rubberized asphalt self-adhe�pg,glass-fi112. ll;lyester....:.
60 mils thick
ASTM D 1970 reinforced waterproofing memliiwt. Des ignedas a •
sees..
metal roofing and roof tile and enlarice nt. •
;
e • e
sees . sees.
61' x 3'3-1/8"
TAS 103 and A rubberized asphalt self-adhering.glass-fiber/pWl ester..:..'
60 mils thick
ASTM D 1970 reinforced waterproofing memhran¢.besigri64m,a meta+•••;•
roofing and roof tile underlayment.:•: •.
65'8" x 3'3-3/8"
TAS 103 and A rubberized asphalt self -adhering, polyeste* reinforced • •
60 unils thick
ASTM D 1970 waterproofing membrane. Des►gntd as a a rpof ti% • e • •
underlayment. 0000
32' l0" x 3'3'/8"
TAS 103 and A rubberized asphalt waterproofing membrane, glass-
130 mils thick
ASTM D 1970 fiber/polyester reinforced, with a granular surface
designed for use as a tile roof underlayment.
65' x 3'3'/8"
TAS 103 and A rubberized asphalt self -adhering, glass-fiber/polyester
80 mils thick
ASTM D 1970 reinforced waterproofing membrane. Designed as a metal
roofing and roof tile underlayment.
65'8" x 3'3'/s"
TAS 103 A homogeneous, rubberized asphalt waterproofing
60 mils thick
membrane, glass fiber reinforced with polyolefinic film
on the upper surface for use as an underlayment for metal
roofing, roof tile, slate tiles and shingle underlayment.
65'8" x 3'3-1/8"
TAS 103 A homogeneous, rubberized asphalt waterproofing
60 mils thick
membrane, glass fiber reinforced with polyolefinic film
on the upper surface for use as an underlayment for metal
roofing, roof tile, slate tiles and shingle underlayment.
32'10" x 3'3 %"
TAS 103 and Polyester reinforced, SBS modified bitumen membrane
ASTM D 6164 with a sanded back face and a granule top surface. For
use in roof tile underlayment systems.
NOA No.: 17-0614.22
Expiration Date: 09/13/21
Approval Date: 07/06/17
Page 2 of 8
MANUFACTURING PLANTS:
1. Hazelton, PA
2. Winter Haven, FL
EVIDENCE SUBMITTED
Test AEency
Test Identifier
Test Name/Report
Date
Trinity ERD
P10870.09.08-R1
TAS 103
12/04/08
P10870.04.09
TAS 103/ASTM D4798 & G155
04/13/09
P33360.06.10
ASTM D1970
07/01/10
P33370.03.11
TAS 103
03/02/11
P33370.04.11
ASTM D 1623
04/26/11
P36900.09.11
TAS 103/ASTM D4798 & G155
0 09/41/11
P37300.10.11
TAS 110/ASTM D4798 & D1970•
• 10/19/11
P40390.08.12-2
ASTM D 1623 . • .
: p$/.( 12
P37590.07.13-1
ASTM D6164 "':"
007/02/13
P45270.05.14
TAS 103, TAS 110 & ASTM061tll
0571�/14
P46520.10.14
ASTM D1623 •,,,,•
:2e1 ?-,14
P44360.10.14
TAS 103 & TAS 110......
.10/"7/14
P43290.10.14
ASTM D 1970 & TAS 1400 9 e *
� 4/o]•7/ 14
PLYG-SC10130.06.16-3
TAS 103 & TAS 110:••:•:
06/27/16
PLYG-10130.06.16-1
ASTM D1970 & TAS 1?0 @
:a6/2%16
.
PRI Asphalt Technologies
PUSA-035-02-01
TAS 103 �••� 0
:09,t%06
PUSA-055-02-02
TAS 103
12nU/07
PUSA-089-02-01
TAS 103/ASTM D4798 & G155
07/06/09
Momentum Technologies, Inc.
JX20H7A
TAS 103/ASTM D4798 & G155
04/01/08
RX14E8A
TAS 103/ASTM D4798 & G155
11/09/09
DX23D8B
TAS 103/ASTM D4798 & G155
02/18/10
DX23D8A
TAS 103/ASTM D4798 & G155
02/18/10
LABELING:
1. All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or logo, city
and state of manufacturing facility and the following statement: "Miami -Dade County Product Control Approved"
or the Miami -Dade County Product Control Seal as shown below.
BUILDING PERMIT REQUIREMENTS:
Application for building pen -nit shall be accompanied by copies of the following:
1. This Notice of Acceptance.
2. Any other documents required by the Building Official or applicable building code in order to properly evaluate the
installation of this materials.
NOA No.: 17-0614.22
Expiration Date: 09/13/21
Approval Date: 07/06/17
Page 3 of 8
INSTALLATION PROCEDURES:
Deck Type 1:
Wood, non -insulated
Deck Description:
Min. 19/32" plywood or wood plank
System Type E(1):
Anchor sheet mechanically fastened to deck, membrane adhered
Anchor/Base Sheet:
One or more plies of ASTM D 226 Type II or ASTM D 2626.
Fastening:
Per FBC 1518.2 & 1518.4 Nails and tin caps 12" grid, 6" o.c. at a minimum 4"
head lap. (for
base sheet only)
Membrane:
Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick
TU P, Polystick TU Plus, Polystick NITS or Polystick MTS Plus, self -adhered.
Surfacing:
See General Limitations Below.
......
Deck Type 1:
Wood, non -insulated '•
•
......
.
......
Deck Description:
Min. 19/32" plywood or wood plank 000090
• •;
""
System Type E(2):
Anchor sheet mechanically fastened to deck, membrane adhered . •
• • • •
....
.
.....
Anchor/Base Sheet:
One or more plies of ASTM D 226 Type II or ASTM D 2626. • • • • • •
• •
• •' • •
Fastening:
Per FBC 1518.2 & 1518.4 Nails and tin caps 12" �� 1grid, 6 o.c. at a 11!'l1Yl•tlm 4"
head la •(for• •
P• .'
base sheet only) . . '
.
. .
'
......
Membrane:
Elastoflex S6 G, hot asphalt applied .'.
..0%
Surfacing:
See General Limitations Below. so•
' • •
Deck Type 1: Wood, non -insulated
Deck Description: Min. 19/32" plywood or wood plank
System Type E(3): Base sheet mechanically fastened to deck, subsequent cap membrane self- adhered.
Anchor/Base Sheet: One or more plies of ASTM D 226 Type II or ASTM D 2626.
Fastening: Per FBC 1518.2 & 1518.4 Nails and tin caps 12" grid, 6" o.c. at a minimum 4"head lap. (for
base sheet only)
Ply Sheet: Polystick NITS Plus, self -adhered with minimum 3" horizontal laps and minimum 6"
vertical laps.
Membrane: Polystick TU Plus, self -adhered.
Surfacing: See General Limitations Below.
NOA No.: 17-061.4.22
Expiration Date: 09/13/21
Approval Date: 07/06/17
Page 4 of 8
INSTALLATION REQUIREMENTS:
1. All nails in the deck shall be carefully checked for protruding heads. Re -fasten any loose deck panels, and
sweep the deck thoroughly to re move any dust and debris prior to application.
2. Place the underlayment over metal drip edge in accordance with RAS 1 11.
3. Place the first course of membrane parallel to the eave, rolling the membrane to obtain maximum contact.
Remove the release film as the membrane is applied. All side laps shall be a minimum of Y and end laps shall
be a minimum of 6". Roll the membrane into place after removing the release strip. Vertical strapping of the
roof with Polystick is acceptable. Membrane shall be back nailed in accordance with applicable building code.
4. When applying the membrane in the valley, start at the low point and work to the high point, rolling the
membrane from the center outward in both directions.
5. For ridge applications, center the membrane and roll from the center outward in both directions.
6. Roll or broom the entire membrane surface so as to have frill contact with the surface, giving specu%ait4tion
to lap areas. : • • 000000
. . 7. Flash vent pipes, stacks, chimneys and penetrations in compliance with Roof Assembl}i current Pralin`•Control...:.
Notice of Acceptance. ...:..
8. All protrusions or drains shall be initially taped with a 6" piece of underlayment. The ffl wg tapQ ehatl.be •
pressed in place and formed around the protrusion to ensure a tight fit. A second laye.r oel;olystick shall. be
..... ••�•••
. .....
applied over the underlayment. • .
.. .. .... ......
...... .
GENERAL LIMITATIONS: . .
•
. . ......
......
1. Fire classification is not part of this acceptance. • : .. : 06906
:
2. Polystick Dual Pro, Polystick Tile Pro, Polystick TU Plus, Polystick MTS and Polystick MTS Pius inay be
used in asphaltic shingles, wood shakes and shingles, non-structural metal roofing, roof tile systems and quarry
slate roof assemblies.
Polystick TU P may be used in all the previous assemblies listed except metal roofing.
Polystick IR-Xe may be used in all the previous assemblies listed except metal roofing and roof tile systems.
Polystick TU Max may be used in non-structural metal roofing and roof tile systems.
Elastoflex S6 G may be used in roof tile systems only.
3. Deck requirements shall be in compliance with applicable building code.
4. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU
Plus, Polystick MTS and Polystick MTS Plus shall be applied to a smooth, clean and dry surface. The deck
shall be free of irregularities.
5. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU
Plus, Polystick MTS and Polystick MTS Plus shall not be adhered directly over a pre-existing roof membrane
as a recover system.
6. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU
Plus, Polystick MTS and Polystick MTS Plus shall not be left exposed as a temporary roof for longer than the
amount of days listed in the table below after application. Polyglass reserves the right to revise or alter product
exposure times; not to exceed the preceeding maximum time limitations.
Ex osure Limitations (Days)
MTS
IR-Xe
Elastoflex
S6 G
TU
Plus
TU P
Tile Pro
Dual Pro
TU Max
MTS Plus
Winter Haven, FL
180
90
180
180
180
180
180
180
180
Hazelton, PA
N/A
90
N/A
180
N/A
N/A
N/A
180
N/A
7. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and
NOA No.: 17-0614.22
Expiration Date: 09/13/21
Approval Date: 07/06/17
Page 5 of 8
Rule 61 G20-3 of the Florida Administrative Code.
8. In roof tile application, data for the attachment resistance of roof tiles shall be as set forth in the roof tile
manufacturer's Notice of Acceptance.
Polystick Tile Pro, Polystick TU Max, Polystick TU Plus or Elastoflex S6 G may be used in both adhesive
set and mechanically fastened roof tile applications.
Polystick Dual Pro is limited to mechanically fastened roof tile applications.
Polystick NITS and Polystick MTS Plus are limited to mechanically fastened with the limitations outlined in
Section 9.
Polystick TU P may be used in mechanically fastened roof tile applications with the exception of mortar set tile
applications.
9. When loading roof tiles on roof tile underlayment for (direct -to -deck) tile assemblies, the maximum roof slope
shall be as follows: (See Table Below) I
Tile
Polystick
Elastoflex
Polystick TU Plus,
Polystick
Polystick
SyUQw:(.E3)
Profile
MTS
S6 G
TU P, Tile Pro,
TU Max
MTS Plus. •
MTS Plus with •
Dual Pro
To Pigs
Flat Tile
Prohibited
4:12
6:12
6:12
5:1 2 • • • *0
6: t 2
without battens
Profiled
Prohibited
4:12
6:12
6:12
4:12
6: j2
Tile
without battens
� • � �
•
•
10.
. .... ......
The above slope limitations can be exceeded only by using battens in accordance with ;he V1;roved Tile System
000000
Notice of Acceptance and applicable Florida Building Code requirements. When battgps arF requi jltl'tltey shall
be utilized during loading and installation of tiles.
Care should be taken during the loading procedure to keep foot traffic to a minimum and to avoid dropliing of
tile directly on the underlayment. Refer to Polyglass' Tile loading detail below for loading procedure — two tiles
laid perpendicular to slope followed by a maximum four tile stack parallel to the slope, for a total of 6 tiles — for
all underlayments except Polystick MTS which shall be loaded onto battens.
7V _
UMAII.K IU HUS
NOA No.: 17-0614.22
Expiration Date: 09/13/21
Approval Date: 07/06/17
Page 6 of 8
11. Refer to prepared roofing system Product Control Notice of Acceptance for listed approval of this product with
specific prepared roofing products. Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU
Max, Polystick TU P, Polystick TU Plus, Polystick MTS, Polystick MTS Plus or Elastoflex S6 G may be
used with any approved roof covering Notice of Acceptance listing Polystick 1R-Xe, Polystick Dual Pro,
Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick MTS, Polystick MTS
Plus or Elastoflex S6 G as a component part of an assembly in the Notice of Acceptance.
If Polystick IR-Xe, Polystick Dual Pro, Polystick Tile Pro, Polystick TU Max, Polystick TU P, Polystick
TU Plus, Polystick MTS, Polystick MTS Plus or Elastoflex S6 G are not listed, a request may be made to the
Authority Having Jurisdiction (AHJ) or the Miami -Dade County Product Control Section for approval provided
that appropriate documentation is provided to detail compatibility of the products, wind uplift resistance, and fire
testing results.
••••••
POLYGLASS GENERAL APPLICATION GUIDELINES FOR POLYSTICU, 1 JV.MBR'ANES
PLEASE CHECK WITH LOCAL BUILDING CODES REGARDING LIMITATIONS OF SPEMWAPPLICATIONS. ....
•
LOCAL CODES MAY SUPERSEDE POLYGLASS REQUIREMENTS AND RECOMNI I)AT104S. 0 0
• • ••••••
1. Polyglass does accept the direct application of Polystick underlayment membranes to w4w4le tiecks..InskAlers ara • 9 • •
cautioned to refer to applicable local building codes prior to direct deck installation tout stele this is TLeeptable.• •• •; •
Please also refer to applicable Product Data Sheets of the corresponding products. '
. . . • ......
2. All rolls, with the exception of Polystick TU Plus should be back -nailed in selvage edge seam as p&*Polyglass .
Back Nailing Guide. Nails shall be, 11 gauge ring shank type, applied with a minimurn•1•%"emetaledisk-es :0
000
required in Miami -Dade County or simplex type nail as otherwise allowable in other regions, at a 1 46Gm rate
of 12" o.c. Polystick TU Plus should be back nailed in designated area marked "nail area, area para clavar" on
the face of membrane, with the above stated nails and/or disks. The head lap membrane is to cover the area being
back -nailed. (Please refer to applicable local building codes prior to installation.)
3. All seal lap seams (selvage laps) must be rolled with a hand roller to ensure full contact.
4. All fabric over fabric; and granule over granule end laps, shall have a 6" wide, uniform layer of Polyglass
Polyplus 55 Premium Modified Flashing Cement, Polyglass Polyplus 50 Premium MB Flashing Cement,
XtraFlex 50 Premium Modified Wet/Dry Cement, Polyglass PG500 MB Flashing Cement, applied in between
the application of the lap. The use of mastic between the laps does not apply to Polystick MTS.
5. A maximum of 6 tiles per stack are allowed when loading tile on the underlayments. Refer to the Polyglass Tile
Loading Guidelines. See General Limitations #9 and #10.
6. Battens and/or Counter -battens, as required by the tile manufacturers NOA, must be used on all projects for
pitch/slopes of TV12" or greater. it is suggested that on pitch/slopes in excess of 6 '/4"/12", precautions should be
taken, such as the use of battens to prevent tile sliding during the loading process.
7. Minimum cure time after membrane installation & before loading of roofing tiles is Forty -Eight (48) Hours.
8. Polystick membranes may not be used in any exposed application such as crickets, exposed valleys, or exposed
roof to wall details.
9. Repair of Polystick membranes is to be accomplished by applying Polyglass Polyplus 55 Premium Modified
Flashing Cement, Polyglass Polyplus 50 Premium MB Flashing Cement, XtraFlex 50 Premiu n Modified
Wet/Dry Cement, Polyglass PG500 MB Flashing Cement to the area in need of repair, followed by a patch of the
Polystick material of like kind should be set and hand rolled in place over the area needing such repair. Patching
membrane shall be a minimum of 6 inches in either direction. The repair should be installed in such a way so
that water will run parallel to or over the top of all laps of the patch.
NOA No.: 17-0614.22
Expiration Date: 09/13/21
Approval Date: 07/06/17
Page 7 of 8
10. All self -adhered membranes must be rolled to ensure full contact with approved substrates. Polyglass requires a
minimum of 40 lbs for a weighted roller for the rolling of the field membrane. Hand rollers are acceptable for
rolling of patches or small areas of the roof. Brooming may be used where slope prohibits rolling.
11. All approved substrates should be dry, clean and properly prepared, before any application of Polystick
membranes commences. An approved substrate technical bulletin can be furnished upon request. It is
recommended to refer to applicable building codes prior to installation to verify acceptable substrates.
12. The Polyglass Miami -Dade Notice of Acceptance (NOA) approval for Polystick membranes can be furnished
upon request by our Technical Services Department by calling 1 (800) 894-4563.
13. Questions in regards to the application of Polyglass products should be directed to our Technical Services
Department at 1 (800) 894-4563.
14. Polyglass recommends that applicators follow good roofing practices and applicable procedures asSoutlined by
the National Roofing Contractors Association (NRCA). . . :""`
• • •
•• • • •
PLEASE CHECK WITH LOCAL BUILDING CODES REGARDING LIMITATIONS OF SPOVIRV PPLICATIONS.
LOCAL CODES MAY SUPERSEDE POLYGLASS REQUIREMENTS AND RECOMIJgWATIONS. .
••••••
•
•
9
: ••••:
•••• •
•••••
END OF THIS ACCEPTANCE ":": : •"•
.. .. ••••
...••.
......
. . . .
•
•. • . ••
.. •
6000
00
••••••
• •
NOA No.: 17-0614.22
Expiration Date: 09/13/21
Approval Date: 07/06/17
Page 8 of 8