Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
RF-19-1652
Miami Shores Village 10050 NE 2 Ave Miami Shores FL 33138 305-795-2204 Issue Date: 07/23/2019 Location Address Parcel Number 160 NW 95TH ST, Miami Shores, FL 33150 1131010330630 Contacts Permit NO.: RF-07-19-1652 Permit Type: Roof Work Classification: Tile/Flat Permit Status: Approved Expiration: 01/14/2020 MATILDE & JOSEPH MONDY Owner T&S ROOFING SYSTEMS INC. Contractor 160 NW 95 ST, MIAMI SHORES, FL 331501712 LOUIS TOLEDO 1461 NW 23 ST, MIAMI, FL 33142 Business: 3052652654 Other:3057727954 .� Inspection Requests: Description: RE -ROOF TILE AND FLAT Valuation: $ 25,500.00 Inspec ion Re TotalSq Feet: 3,000.00 Fees Amount Application Fee - Other $50.00 CCF $15.60 DBPR Fee $4.50 DCA Fee $3.00 Education Surcharge $5.20 Roofing Fee $250.00 Scanning Fee $12.00 Technology Fee $7.50 Total: $347.80 Building Department Copy Payments Date Paid Amt Paid Total Fees $347.80 Check # 36591 07/23/2019 $347.80 Amount Due: $0.00 In consideration of the issuance to me of this permit, I agree to perform the work covered hereunder in compliance with all ordinances and regulations pertaining thereto and in strict conformity with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village. In accepting this permit I assume responsibility for all work done by either myself, my agent, servants, or employes. I understand that separate permits are required for ELECTRICAL, PLUMBING, MECHANICAL, WINDOWS, DOORS, ROOFING and SWIMMING POOL work. OWNERS AFFIDAVI : I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws regulating con uctio an zoning. Futhermore, I authorize the above named contractor to do the work stated. Authorized ignature: t ner / Applicant / Contractor / Agent Date July 23, 2019 Page 2 of 2 0. ��► ���� BUILDING PERMIT APPLICATION Miami Shores Village RECEIVED Building Department JUL 18 20N. 10050 N.E.2nd Avenue, Miami Shores, Florida 33138 ]BY: Tel: (305) 795-2204 Fax: (305) 756-8972 INSPECTION LINE PHONE NUMBER: (305) 762-4949 FBc Zrro 1 �I- Master Permit NOIL V� \� Sub Permit No. ❑BUILDING ❑ ELECTRIC ❑ ROOFING ❑ REVISION ❑ EXTENSION ❑RENEWAL ❑PLUMBING [:]MECHANICAL [:]PUBLICWORKS [—]CHANGE OF ❑ CANCELLATION ❑ SHOP CONTRACTOR DRAWINGS JOB ADDRESS: Citv: Miami Shores Countv: Miami Dade Zia: Folio/Parcel#: - V Occupancy Type: Load: _ OWNER: Name F e Simple Titleholder): Address: 1�� NW . V Is the Building Historically Designated: Yes NO Construction Type: Flood Zone: BFE: FFE: n e#: City: " l 7 1 State: t C Zip: Tenant/Lessee Name: _Phone#: Email: `—�--V 17D O� s" 2 ► CONTRACTOR: Company Name: Phone#: - "� `70�-W V Address: City: Qualifier Name: � W 2 j Si State: I t� Zip: Phone#: State Certification or Registration #: Certificate of Competency #: DESIGNER: Architect/Engineer: Phone#: Address: r('I City: State: Zip: Value of Work for this Permit: $ [�" Square/Linear Footage of Work: Go V Type of Work: ❑ Addition� ❑ Alteration New ❑ Repair/Replace ❑ Demolition {( Description of Work: !� K i :+ Specify color of color thru tile: Submittal Fee $ Permit Fee $ Scanning Fee $ Radon Fee $ Technology Fee $ Training/Education Fee $ Structural Reviews $ _ I (Revised02/24/2014) CCF $ DBPR $ CO/CC $ Notary $ Double Fee $ _ Bond $ TOTAL FEE NOW DUE $ Bonding Company's Name (if applicable) i *Bonding Company's Address City State Mortgage Lender's Name (if applicable) Mortgage Lender's Address City State Zip Zip Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRIC, PLUMBING, SIGNS, POOLS, FURNACES, BOILERS, HEATERS, TANKS, AIR CONDITIONERS, ETC..... OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws regulating construction and zoning. "WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT." Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person whose property is subject to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site for the first inspection which occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the inspection will not be approved and a reinspection fee will be charged. Signature Signature OWNER or AGENT CONTRACTOR The foregoing instrument was acknowledged before me this The foregVng instrument was acknowledged before me this S 1day of Iv t 20 I J by day of U 20 by r1044y , who is personally known to DUI 5 who is personally known to me or who has produced �C as me or who has produced as identification and who did take an oath. NOTARY PUBLIC: identification and who did take an oath. NOTARY -PUBLIC: Sign: {�)�14U /i"jLlf l)' " j ign: Print: Yl.��'� ( G(?riZk I QZ rint: DAYEL F_L Seal: eal: `/r �11 NotaryP_b'c-S zteof Al DANIELGONZALEZ \'. Commi55ionGG '4 141YCOMMIS5lON#GG250277 c, My Comm Expire Nov 2020 sM a EXPIRES: August 19, 2022 •���f oP. APPROVED BY -,—'� l(I (q Plans Examiner Zoning Ck),?/i�'/" Structural Review Clerk (Revised02/24/2014) 7/8/2019 Property Search Application - Miami -Dade County OFFICE OF cTHE PROPERTY APPRAISER Summary Report Property Information Folio: 11-3101-033-0630 Property Address: 160 NW 95 ST Miami Shores, FL 33150-1712 Owner JOSEPH MONDY &W MATILDE Mailing Address 160 NW 95 ST MIAMI, FL 33150-1712 PA Primary Zone 0800 SGL FAMILY - 1701-1900 SQ Primary Land Use 0101 RESIDENTIAL -SINGLE FAMILY: 1 UNIT Beds / Baths / Half 3/2/0 Floors 1 Living Units 1 Actual Area 2,765 Sq.Ft Living Area 2,045 Sq.Ft Adjusted Area 2,448 Sq.Ft Lot Size 12,500 Sq.Ft Year Built Multiple (See Building Info.) Assessment Information Year 2019 2018 2017 Land Value _$288;000 $275,000 $275,000 Building Value $187,354 $187,695 $174,497 XF Value - $-2;867 $2,886 $2,905 Market Value $479,221 $465,581 $452,402 Assessed Value $149,163 $146,382 $143,372 Benefits Information Benefit Type 2019 2018 2017 Save Our Homes Cap Assessment Reduction $330,058 $319,199 $309,030 Homestead Exemption $25,000 $25,000 $25,000 Second Homestead Exemption $25,000 $25,000 $25,000 Civilian Disability Exemption $500 $500 $500 Note: Not all benefits are applicable to all Taxable Values (i.e. County, School Board, City, Regional). Short Legal Description MIAMI SHORES SEC 6 PB 10-39 LOT 7 & 8 BLK 132 LOT SIZE 100.000 X 125 OR 12843-100 0386 1 Generated On : 7/8/2019 Taxable Value Information 2019 2018 2017 County Exemption Value $50,500 $50,500 $50,500 Taxable Value $98,663 $95,882 $92,872 School Board Exemption Value $25,500 $25,500 $25,500 Taxable Value $123,663 $120,882 $117,872 City Exemption Value $50,500 $50,500 $50,500 Taxable Value 1 $98,663 $95,882 $92,872 Regional Exemption Value $50,500 $50,500 $50,500 Taxable Value 1 $98,663 $95,882 $92,872 Sales Information Previous Sale Price OR Book -Page Qualification Description 03/01/1986 $80,000 12843-0100 Sales which are qualified 04/01/1976 $48,500 00000-00000 Sales which are qualified The Office of the Property Appraiser is continually editing and updating the tax roll. This website may not reflect the most current information on record. The Property Appraiser and Miami -Dade County assumes no liability, see full disclaimer and User Agreement at http://www.miamidade.gov/info/disclaimer.asp Version n A�i—w� �! CERTIFICATE ®F LIABILITY INSURANCE DATE (MMIODIYYYY) F07/22/2019 THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMAffON ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT. If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder In lieu of such endorsement(s). PRODUCER CONTACT Amanda Nogues NAME: Eastern Insurance Group, Inc. PHCN NE. E (305) 595-3323 AIc No): (305) 595-7135 9570 SW 107Avenue ADDRESS: amanda@easteminsurance.net Suite 104 INSURER(S) AFFORDING COVERAGE NAIC S Miami FL 33176 INSURERA: Gemini Insurance Company 10833 INSURED INSURER B : Bridgefield Casualty Insurance Company 10335 T & S Roofing Systems, Inc. INSURER C : 1461 NW 23rd Street INSURER D : INSURER E : Miami FL 33142 INSURER F : COVERAGES CERTIFICATE NUMBER: Master is-2U REVISION NUMBER: THIS IS TO CFRTIFY THATTHE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECTTO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. LTR TYPE OF INSURANCE S POLICYNUMBER M EXP MMLIDD LIMITS A X COMMERCIAL GENERAL LIABILITY CLAIMS -MADE FX OCCUR VGGP004314 07/20/2019 07/20/2020 EACH OCCURRENCE $ 1,000,000 DAMAGE TO RMTE137— PREMISE3 Ea occurrence $ 5'000 MEDEXP Anyone on $ Excluded PERSONAL& ADV INJURY $ 1,000,000 GEN'LAGGREGATELIMITAPPLIESPER: POLICY � JEST LOG OTHER: GENERAL AGGREGATE $ 2,000,000 PRODUCTS-COMPIOPAGO $ 2,000,000 $ AUTOMOBILE LIABILITY ANYAUTO OWNEDONLY AUTOS SCHEDULED AUTOS HIRED NON -OWNED AUTOS ONLY AUTOS ONLY COMBINED SINGLE LIMIT Ea accident $ BODILY INJURY (Per person) $ BODILY INJURY (Per accident) $ PROPERTYDAMAGE Peracddenl $ $ UMBRELLALIAB EXCESS LIAR OCCUR CLAIMS -MADE EACH OCCURRENCE S ' AGGREGATE $ DED RETENTION $ $ B WORKERS COMPENSATION AND EMPLOYERS' LIABILITY YIN ANY PROPRIETORlPARTNERIEXECUTIVE OFFICER/MEMBER EXCLUDED? (Mandatory In NH) !ryes, describe under DESCRIPTION OF ORATIONS below NIA 196-44967 01/01/2019 01/01/2020 PER OTH- %� STATUTE ER E.L. EACH ACCIDENT $ i,000,000 E.L. DISEASE- EA EMPLOYEE S 1,000,000 E.L. DISEASE - POLICY LIMIT $ 1,000.000 DESCRIPTION OF OPERATIONS I LOCATIONS I VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space Is required) Roofing Contractor ' UK MIAMISH Miami Shores Village 10050 NE 2nd Avenue Miami Shores, FL 33138 SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. AUTHORIZED REPRESENTATIVE ©1988-2015 ACORD CORPORATION. All rights reserved. ACORD 25 (2016/03) The ACORD name and logo are registered marks of ACORD Section AB MIAMI•DADE Miami -Dade County HVHZ Electronic Roof Permit Form "Delivering Excellence Every Day" Section A (General Information) Master Permit No: Process No: Contractor's Name: FT700FING Job Address: 160 NW 95 ST Roof Category ❑✓ Low Slope ❑ Mechanically Fastened Tile ❑ Asphaltic Shingles ❑ Metal Panel/Shingles ❑ Sprayed Polyurethane Foam ❑ Other: . . .... ...... ...... .. ...... .... . ..... 00000 H M15rtar/Adht,i� Set Tfle• •; • 0 0 0 : 0 : 0 go LI Weod StjggIeg4Shakes •• • • •• • . •• • • 0000 Roof Type ❑ New Roof ❑ Re -Roofing ✓❑ Recovering ❑ Repair ❑ Maintenance Are there Gas Vent Stacks located on the roof? ❑ Yes ❑ No If yes, what type? ❑ Natural ❑ LPGX Roof System Information Low slope roof area ft') VOO Steep Sloped area (U) 2600 Total (ft.2) 3000 Section B (Roof Plan) Sketch Roof Plan: Illustrate all levels and sections, roof drains, scuppers, overflow scuppers and overflow drains. Include iimensions of sections and levels, clearly identify dimensions of elevated pressure zones and location of parapets. 3erimeter Width (a'): E::� Corner Size (a' x a'):E__::� ,2 '3 FA L�G I RECE _ Tiie Roof Sy ` �T ,4 "Delivering Excellence Every Day" Miami -Dade County HVHZ Electronic Roof Permit Form Section D Tile Roof System Roof System Manufacturer: EAGLE ROOFING .... • • • • Notice of Acceptance Number (NOA): 18-0509.18 • • � • • • Minimum Design Wind Pressures, If Applicable (from RAS 127 or Calculations): • • • • • • 39.7P 2:68.1P 3: Maximum Design Wind Pressures, (From the NOA Specific system): 31.3 psf ...... Fill in the specific roof assembly components. If a component is not required, insert not applicatfle (Wal in the IW74ox. . . Deck Type: --5/8" Plywood— • Roof Slope: "/12" Roof Mean Height: 15 ft. Method of Tile Attachment: --Adhesive, 2 Small Paddy Polyfoam Polypro-El Method of Tile Attachment per NOA: Drip Edge Size & Gauge: --3" face 26 ga.-- 3 Drip Edge Material Type: --Galvinized Metal -- Optional Insulation: Optional Nailable Substrate: Optional Nailable Substrate Attachment: Basesheet Type: P.30-AST.M.- TYPE II Fastener Type for Basesheet Attachment: 1 1/4 RS NAILS 6" OC AND 12" FIELD Tile Underlayment (Cap Sheet) Type: ILE SEAL Tile Underlayment Attachment Method: SELF ADHERED Drip Edge Fastener Type: 1 1/4 RS NAILS Tile Profile: LOW PROFILE CONCRETE TILE Hook Strip/Cleat gauge or weight: -- Select Hook Strip -- Section E ht AMl-DIADE "Delivering Excellence Every Day" Miami -Dade County HVHZ Electronic Roof Permit Form Section E (Tile Calculations) Method 1 "Moment Based Tile Calculations Per RAS 127V • • • • • ...... For Moment based tile systems, use Method 1. Compare the values for Mr with the values from MTV itieivlf values are greater than or equal to the Mr values, for each area of the roof, then the tile attachment method is acceptable. :.. • •: •••• • ..... P 1: 39.1 x .278. - = 10.86 - Mg: 7.71 = Mr1: 3 15.__.... �'�_ NO,A.IbIf '..'.' ...... P 2 68.�_-.... x X.278 = 18.93. - Mg: 7.71 = Mr2: N0*A f •. ....:. P 3: 100.7 x X .278 = 7.99 - Mg: 7.71 = Mr3: 0.28 < 31.3 ._ N �f . • :.. • • Method 3 "Uplift Based Tile Calculations Per RAS 127" For Uplift based tile systems use Method 3. Compare the values for F' with the values for Fr. If the F' values are greater than or equal to the Fr values, for each area of the roof, then the the attachment method is acceptable. P1:x1:®=�xw:O=®-W:®=® xCos 0:171=Fr1:®:5 NOAF' P2: x1: = xw:O=®-W:®= xCos 6:r7 =Fr2: 5 NOAF' P3: x1:®=®xw:®=®-W:®=� xCos 6:®=Fr3:®:5 NOAF' Where to Obtain Information to complete tile calculations Description Symbol Where to Find Design Pressure P1 or P2 or P3 Table 1 RAS 127, or by an engineer analysis prepared, signed and sealed by a professional engineer based on ASCE 7. Mean Roof Height H Job Site Roof Slope A Job Site Aerodynamic Multiplier x Product Approval (NOA) Restoring Moment due to Gravity Mg Product Approval (NOA) Attachment Resistance Mf Product Approval (NOA) Required Moment Resistance Mr Calculated Minimum Attachment Resistance F' Product Approval (NOA) Required Uplift Resistance Fr Calculated Average Tile Weight W Product Approval (NOA) Tile Dimensions I =length w = width Product Approval (NOA) 41 SECTION 1524 HIGH VELOCITY HURRICANE ZONES — REQUIRED OWNERS NOTIFICATION FOR ROQFING CONSIDERATIONS • • • • .... • • 1524.1 Scope. As it pertains to the section, it is the responsibility of roofing contracimr govide the owner witeh** •. the required roofing permit, and to explain to the owner the content of the section. Tho 1wavisions of Section R44'b'�� • govern the minimum requirements and standards of the industry for roofing system installations. Additionally, tht1; • • following items should be addressed as part of the agreement between the owner afflU&tbntractdT'TAa ownets"' initial in the designated space indicates that the item has been explained. " ' """ ...... 2. Q < Renailing wood decks: When replacing roofing, the existing wood roof deFk may have �o • be renailed in accordance with the current provisions of Section R4403. (The roof deck is aMolly concealed prior to removing the existing roof system). 4. Exposed Ceiling: Exposed, open beam ceilings are where the underside of the roof decking can be viewed from below. The owner may wish to maintain the architectural appearance; therefore, roofing nail penetration of the underside of the decking may not be acceptable. This provides the option of maintaining the appearance. 6. !;j]4 -Overflow scuppers (wall outlets): It is required that rainwater flows off so that the roof is not overloaded from a buildup of water. Perimeter/edge wall or other roof extension may block this discharge if overflow scuppers (wall outlets) are not provided. It may be necessary to install overflow scuppers in accordance with the requirements of Sections R4402, R4403 and R4413. Own r/Agent's Signature Date 160 NW Property Address �=— Revised on 7/9/2009 LD;07/01/2015; Contract Signature Date Permit Number Miami Shores Village Building Department 10050 N.E.2nd Avenue Miami Shores, Florida 33138 Tel: (305) 795.2204 F.W 1305) 75U972 OWNERS'S AFFIDAVIT OF EXEMPTIO::: •0� ROOF TO WALL CONNECTION HURRICANE MITIGATION RETROFIT FOWEXI'STINro• Off• ' ..... BUILT SINGLE FAMILY RESIDENTIAL STRUCTURES":": .... ... ...... PERSUANT TO SECTION 553.844 F.S. •. . . . . ...... •.•••• To: Miami Shores Village Building Department 135te:" •'' • • 10050 NE 211d Ave Miami Shores, FI 33138 Re. Owner's Name. Property Address: Roofing Permit Number: Dear Bu'Iding Offif i I: I certify that I am not required to retrofit the roof to wall connections of my building because: o The just valuation for the structure for purpose of ad valorem taxation is less than $300,000.00. Please attach proof of ad valorem taxation. o The building was constructed in compliance with the provisions of the Florida Building Code (FBC) or with the provisions of 1994 edition of the South Florida Building Code (1994 SFBC) Signature Print Name State of Florida County of Dade The undersigned, being the first duly sworn, deposes and says that he/she is the owner for the above property mentioned. Sworn to and subscribed before me this S day of � 0 1 Notary Public, Sate of Florida at Large �•""' DANIEL GONZALEZ 'p /y •r' W COMMISSION 8 GG-250277 ;r �P EXMES: August 19, 2022 rzV Bonded Thru Notary Public Underwriters When the just valuation of the structure for purpose of ad valorem taxation is equal to or more than $300,000.00, and the building was not constructed with FBC nor a 1994 SFBC. Then you must provide a building application from a General Contractor for the Roof to Wall connection Hurricane Mitigation. Revised on 5/21/2009 MIAMFDADE MIAMI-DADE COUNTY PRODUCT CONTROL SECTION 11805 SW 26 Street, Room 208 DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) Miami, Florida 33175-2474 BOARD AND CODE ADMINISTRATION DIVISION T (786) 315-2590. f TM4 315-2599 NOTICE OF ACCEPTANCE (NOA) mo e " ` (N ) ��vtr�m�amida�lg,_ ov�economy � • Eagle Roofing Products LLC "'"' '` 9009" 1575 East C.R. 470 Sumterville, FL 33585 •••.•• • •.•... .... . ..... •••••• •f . ••••• SCOPE: 00 This NOA is being issued under the applicable rules and regulations governing the use of Astruc'tion rrUa4ll6. The* documentation submitted has been reviewed and accepted by Miami -Dade County RER-ProduorControi Section to 13, •+• used in Miami -Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).' .:„• ` This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section (in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reserve the right to have this product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is determined by Miami -Dade County Product Control Section that this product or material fails to meet the requirements of the applicable building code. This product is approved as described herein, and has been designed to comply with the Florida Building Code including the High Velocity Hurricane Zone of the Florida Building Code. DESCRIPTION: Low Profile Concrete Tile LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein. RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product. TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of NOA. ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done in its entirety. INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official. This NOA revises NOA No. 17-0822.13and consists of pages 1 through 9. The submitted documentation was reviewed by Freddy Semino, NOA No. 18-0509.18 MIA L A L,Uui TY Expiration Date: 10/05/21 Approval Date: 06/14/18 Page 1 of 9 x ROOFING ASSEMBLY APPROVAL Category: Roofing Sub Category: Roofing Tiles Material: Concrete 1. SCOPE: This approves a new roofing system using "Low Profile Concrete Tile" as manufactured by Eagle Roofing Products LLC in Sumterville, FL and described in Section 2 of this Notice of Acceptance. For use in locations where the pressure requirements, as determined by applicable Building Code, do•iset exceed the design pressure values obtained by calculations in compliance with RAS 12: usAg the v'hhic% listed 2d'; • section 4 herein. The attachment calculations shall be done as a moment based system.' ..... .. ...... 2. PRODUCT DESCRIPTION: .... 0 - Manufactured by Test .... . ..... jrAd.%ct • Applicant Dimensions Specifications Deceriplion ',.'.' ...... Low Profile Lenght = 17" TAS 112 Flat profile concred7JU>ile equipped with two '. Concrete Tile Width = 12 '/4" Type 3a nail holes. For adhesive set, directdeck or Thickness ='/2" Class III battened nail -on applicAi4is. • • • • • • Low Profile Lenght = 17" TAS 112 Flat profile concrete roof tile equipped with two Concrete Tile Width = 12 `/4" Type 3a nail holes. For adhesive set, direct deck or Thickness = ``/2" Class III battened nail -on applications. Low Profile Lenght = 17" TAS 112 Flat profile concrete roof tile with slate finish Concrete Tile Width = 12 `/4" Type 3a equipped with two nail holes. For adhesive set, Thickness ='/z" Class III direct deck or battened nail -on applications. Low Profile Lenght = 17" TAS 112 Flat profile concrete roof tile with shake finish Concrete Tile Width = 12 `/4" Type 3a equipped with two nail holes. For adhesive set, Thickness = ``/2" Class III direct deck or battened nail -on applications. Low Profile Lenght = 17" TAS 112 Flat profile concrete roof tile brushed finish Concrete Tile Width = 12'/4" Type 3a equipped with two nail holes. For adhesive set, Thickness ='/2" Class III direct deck or battened nail -on applications. Trim Pieces Lenght = varies TAS 112 Accessory trim, concrete roof pieces for use at Width = varies hips, rakes and ridges. Manufactured for each varying thickness tile profile. NOA No. 18-0509.18 Expiration Date: 10/05/21 Approval Date: 06/14/18 Page 2 of 9 2.1 EVIDENCE SUBMITTED: Test Agency Test Identifier PRI Asphalt Technologies ERPF-001-02-01 Redland Technologies 7161-03 Appendix III Redland Technologies 7161-03 Appendix III Redland Technologies 7161-03 Appendix II Redland Technologies P0402 Redland Technologies Redland Technologies The Center for Applied Engineering, Inc. The Center for Applied Engineering, Inc. The Center for Applied Engineering, Inc. The Center for Applied Engineering, Inc. The Center for Applied Engineering, Inc. The Center for Applied Engineering, Inc. The Center for Applied Engineering, Inc. Celotex Corporation Testing Service Celotex Corporation Testing Service Walker Engineering, Inc. Walker Engineering, Inc. ATL of South Florida ATL of South Florida PRI Construction Materials Technologies Letter Dated Aug. 1, 1994 P09647-01 94-084 25-7094-(2, 5, & 8) 25-7183-(5 thru 6) 25-7214-(1, 5, & 8) 25-7487-2 25-7496-(1 & 4) 25-7804-6 520109-1 520111-4 520191-1 Calculations Calculations RT1214.01-15 RT0706.01-17 DAPF-001-02-13 Test Name/Report Date TAS 112 Aug. 2006 Static Uplift Testing Dec. 1991 TAS 102 Static Uplift Testing Dec. 1991 TAS 102(A) Wind Tunnel Testing ..Pec. 1991 TAS 108 (Nail -On). '....' ....•. Withdrawal Resistance Testing of screw vs. ...... "'Sept. 1993 '. smooth shank nails ; .. ...... • • • • • • Wind Tunnel Testing, • • • • • ; • �Q��. 1994 • TAS 108 (Nail -On) "" • • ; • • ...... Wind Tunnel Testing..'..' . .. . ..... '..Aub. 199¢..... TAS 108 (Mortar Sett • • . Static Uplift Testing: • • : • •Ray 1993 * • • TAS 101 (Mortar Setj .. • . • • ; • • • • ; Static Uplift Testing * O t. 1994 TAS 102 Static Uplift Testing Feb. 1995 TAS 102 Static Uplift Testing March, 1995 TAS 102 Static Uplift Testing Dec. 1995 TAS 102 Static Uplift Testing Dec. 1995 TAS 102 Static Uplift Testing Sep. 1996 TAS 102 Static Uplift Testing Dec. 1998 TAS 101 Static Uplift Testing March 1999 TAS 101 Aerodynamic Multiplier Sep. 2006 Restoring Moments Due to Gravity Sep. 2006 TAS-112 12/17/15 TAS-112 09/25/17 TAS 101 (Adhesive) 11/30/17 NOA No. 18-0509.18 Expiration Date: 10/05/21 Approval Date: 06/14/18 Page 3 of 9 3 LIMITATIONS: 3.1 Fire classification is not part of this acceptance. 3.2 For mortar or adhesive set tile applications, a static field uplift test in accordance with TAS 106 shall be required, refer to applicable Building Code. 3.3 Applicant shall retain the services of a Miami -Dade County Certified Laboratory to perform quarterly test in accordance with TAS 112, appendix `A'. Such testing shall be submitted to the Miami -Dade County Product Control Section for review. 3.4 Minimum underlayment shall be in compliance with the applicable Roofing Applications Standards listed section 4.1 herein. 3.5 30/90 hot mopped underlayment applications may be installed perpendicular to the roof slope unl *s` * 1&ted 000009 otherwise by the underlayment material manufacturers published literature. • .. . ... 3.6 This acceptance is for wood deck applications. Minimum deck requirements shall LriiieG4mpliance %jh .... • applicable Building Code. ...... 3.7 All products listed herein shall have a quality assurance audit in accordance with tha W&la Buildiaig:Gode • .... . Rule 61 G20-3 of the Florida Administrative Code. ..... • ...... .. . ..... . . . .. .. .. . ...... . 4 INSTALLATION: • . • • • • • . . . ...... 4.1 Eagle Roofing Products LLC Low Profile Flat Concrete Roof Tiles and its components sll ll be ijMfl2t1 in strjct • compliance with Roofing Application Standard RAS 118, RAS 119 and RAS 120. •.. • . .. : • • • 4.2 Data For Attachment Calculations • • • • Table 1: Average Weight (W) and Dimensions (I x w ) Tile Profile Weight-W (lbf) 1 Length -I (ft) Width-w (ft) 1 Low Profile Flat Tile 11.4 1.42 1.03 Table 2: Aerodynamic Multipliers -1\ (ft3) Tile Profile /\ (ft3) Batten Application A (ft3) Direct Deck Application Low Profile Flat Tile 0.301 0.278 Table 3: Restoring Moments due to Gravity - M9 (ft-lbf) Tile Profile 3":12" 4":12" 5":12" 6":12" Greater than 7":12" Low Profile Flat Tile Battens Direct Deck Battens Direct Deck Battens Direct Deck Battens Direct Deck Battens Direct Deck 7.48 7.71 7.37 7.59 7.22 7.44 7.05 7.27 6.86 7.07 Table 4: Attachment Resistance Expressed as a Moment - Mr (ft-lbf) for Nail -On Systems Tile Fastener Type Direct Deck Direct Deck Battens Profile (min 15/32" plywood) (min. 19/32" plywood) 2-10d Ring Shank Nails 30.9 38.1 17.2 NOA No. 18-0509.18 Expiration Date: 10/05/21 Approval Date: 06/14/18 Page 4 of 9 i Low Profile Flat Tile 1-10d Smooth or Screw Shank Nail 7.3 9.8 4.9 Low Profile Flat Tile 2-10d Smooth or Screw Shank Nails 14.0 18.8 7.4 1 #8 Screw 30.8 30.8 18.2 2 #8 Screw 51.7 51.7 24.4 1-10d Smooth or Screw Shank Nail Field Clip) 24.3 24.3 24.2 1-10d Smooth or Screw Shank Nail Eave Clip) 19.0 19.0 22.1 2-10d Smooth or Screw Shank Nails Field Clip) 35.5 35.5 • . ...34.8 'Y...' .Y. 2-10d Smooth or Screw Shank Nails Eave Clip), 31.9 31.9 •t.�•0 •••� V.2 •Y• Y.. 2-10d Ring Shank Nails' 50.3 65.5 • ••••;6.3 1. Installation with a 4" the headlap and fasteners are located a min. of 2'/2"from Wad.of tile... . ..: Table 5: Attachment Resistance Expressed as a Moment Mi(ft-I'A •••••• • for Two Patty Adhesive Set Systems '..' .. Tile Profile Tile Application Attachment Resistance Low Profile Flat Tile Adhesive' 1 See manufactures component approval for installation requirements. 2 The Dow Chemical Company TileBond Average weight per patty 13.9 grams. 31.3 3 ICP Adhesives Polyset® AH-160 Average weight per patty 8 grams. 31.3 4 DAP Foam Touch N Seal StormBond ® 2 Roof Tile Adhesive. Average weight per paddy 8 grams. 109 Table 6: Attachment Resistance Expressed as a Moment - Mf (ft-lbf) for Single Patty Adhesive Set Systems Tile Profile Tile Application Attachment Resistance Low Profile Flat Tile ICP Adhesives Polyset® AH-160 118.9 ICP Adhesives Polyset® AH-160 40.4 5 Large paddy placement of 45 grams of Po) ProT"" 6 Medium paddy placement of 24 grams of Pol ProT"" NOA No. 18-0509.18 Expiration Date: 10/05/21 Approval Date: 06/14/18 Page 5 of 9 Table 7: Attachment Resistance Expressed as a Moment - Mf(ft-lbf) for Mortar Set Systems Tile Profile Tile Application Attachment Resistance Low Profile Flat Tile Mortar Set 43.9 7 Tile-Tite Roof Tile Mortar. 5. LABELING : All tiles shall bear the imprint or identifiable marking of the manufacturer's name or logo (Se i P ;tail Below), or following statement: "Miami -Dade County Product Control Approved".. • ' • • • • • • • • • • • ...... .. ...... SoVes E " 0 00 a 00 00 EAGL:••:•: •••• ••s::• ® • • i•••i• •••••• :0*80: •• • • F00. • LORIDA ' • • (LOCATED ON UNDERSIDE OF TILE) D� At EAGLE FL (LOCATED ON FRONTSIDE OF TILE) Low PROFILE CONCRETE ROOF TILE LABEL, SUNITERVILLE PLANT 6. BUILDING PERMIT REQUIREMENTS: 6.1 Application for building permit shall be accompanied by copies of the following: 6.1.1 This Notice of Acceptance. 6.1.2 Any other documents required by AHJ or applicable Building Code in order to properly evaluate the installation of this system. QMIAMMDAD, CO' NTY NOA No. 18-0509.18 rml Expiration Date: 0 09.18 Approval Date: 06/14/18 Page 6 of 9 PROFILE DRAWING LOW PROFILE ROOF TILE 0 4 LOW PROFILE ROOF TILE CMIAMI-�DADE COUNTY • • NOA No. 18-0509.18 Expiration Date: 10/05/21 Approval Date: 06/14/18 Page 7 of 9 f LOW PROFILE ROOF TILE LOW PROFILE ROOF TILE NOA No. 18-0509.18 MIAMI-DAD, COUNTY�Vgidmuslyj Expiration Date: 10/05/21 Approval Date: 06/14/18 Page 8 of 9 4 • • LOW PROFILE ROOF TILE END OF THIS ACCEPTANCE rk •••• •••••• • • • • • • • • • • • • • • • NOA No. 18-0509.18 M ff-'1AD; COUNTY Expiration Date: 10/05/21 Approval Date: 06/14/18 Page 9 of 9 MIAMI-DADE COUNTY MIAMI PRODUCT CONTROL SECTION Milia Wa 11.805 SW 26 Street, Room 208 DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) Miami, Florida 33175-2474 BOARD AND CODE ADMIMSTRATION DIVISION T (786)315-2590 F (786) 315-2599 NOTICE OF ACCEPTANCE (NOA) www.miamidade.sov/economy ICP Adhesives and Sealants, Inc. 12505 NW 44" Street Coral Springs, FL. 33065 SCOPE: This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The documentation submitted has been reviewed and accepted by Miami -Dade County RER -Product Control Section to be used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ)....... . ........... This NOA shall not be valid after the expiration date stated below. The Miami -Dade Couiitj.Prdduct Cp;troj Section • (In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve tkeright to have Mic prodrw.. ; • or material tested for quality assurance purposes. If this product or material fails to perform•in•t6accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediate) revoke Otl or the use P g Y Y �.m �.�', g4$ of such product or material within their jurisdiction. RER reserves the right to revok8 *this acceptance, if it •is; • • • determined by Miami -Dade County Product Control Section that this product or material faiis:to rLeet the-fooi.uremelifte • • .. .. .. . ...... of the applicable building code. • * • • • • This product is approved as described herein, and has been designed to comply with the •Florida Building Code..:. ..... . including the High Velocity Hurricane Zone of the Florida Building Code. ; ... ; 0 • • • DESCRIPTION: ICP Adhesives Polyset® AH-160 LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein. RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product. TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of NOA. ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done in its entirety. INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official. This NOA renews NOA 16-0315.01 and consists of pages I through 11. The submitted documentation was reviewed by Alex Tigera. •ram ,r/ � NOA No.: 17-0322.03 Expiration Date: 05/10/22 Approval Date: 04/27/17 Page 1 of 11 ROOFING COMPONENT APPROVAL: Category: Roofing Sub Category: Roof tile adhesive Materials: Polyurethane SCOPE: This approves ICP Adhesives Polyset® AH-160 as manufactured by ICP Adhesives and Sealants, Inc. as described in this Notice of Acceptance. For the locations where the design pressure requirements, as determined by applicable building code, do not exceed the design pressure values obtained by calculations in compliance with Roofing Application Standard RAS 127. For use with approved flat, low, and high profile roof tile systems using ICP Adhesives Polyset' AH-160. PRODUCTS MANUFACTURED BY APPLICANT: Product Dimensions Test Specifications ICP Adhesives Polyset®AH-160 ICP Adhesives Foam Dispenser RTF1000 ICP Adhesives ProPack® 30 & 100 N/A TAS 101 . . .... ...... ProduefBesdliptioh• • • ...... .. ...... Two component polyurothane foamadhesii8 wwwww. .... . ..... N/A Dispensing ..... Equipmegt. •.• .. . • • • ..... • • • • • • • • • • • •wwwww • N/A Dispensing Equipment • • • • • • ...... w • • • wwwwww PRODUCTS MANUFACTURED BY OTHERS: Any Miami -Dade County Product Control Accepted Roof Tile Assembly having a current NOA which list attachment resistance values with the use of ICP Adhesives Polyset' AH-160 roof tile adhesive. MANUFACTURING LOCATION: 1. Tomball, TX. PHYSICAL PROPERTIES: Property Test Results Density ASTM D 1622 1.6 lbs./ft.' Compressive Strength ASTM D 1621 18 PSI Parallel to rise 12 PSI Perpendicular to rise Tensile Strength ASTM D 1623 28 PSI Parallel to rise Water Absorption . ASTM D 2127 0.08 Lbs./Ft Moisture Vapor Transmission ASTM E 96 3.1 Perm / Inch Dimensional Stability ASTM D 2126 +0.07% Volume Change @ -400 F., 2 weeks +6.0% Volume Change @1580F., 100% Humidity, 2 weeks Closed Cell Content ASTM D 2856 86% Note: The physical properties listed above are presented as typical average values as determined by accepted ASTM test methods and are subject to normal manufacturing variation. MIAMFpADECOUN7Y NOA No.: 17-0322.03 Expiration Date: 05/10/22 Approval Date: 04/27/17 Page 2 of 11 EVIDENCE SUBMITTED: Test Ageney Test Identifier Test Name/Report Date Center for Applied Engineering #94-060 TAS 101 04/08/94 257818-IPA TAS 101 12/16/96 25-7438-3 SSTD 11-93 10/25/95 25-7438-4 25-7438-7 SSTD 11-93 11/02/95 25-7492 SSTD 11-93 12/12/95 Miles Laboratories NB-589-631 ASTM D 1623 02/01/94 Polymers Division Ramtech Laboratories, Inc. 9637-92 ASTM E 108 e •••• (TWO 93 ..,... Southwest Research Institute 01-6743-011 ASTM E 108 " • • ; • • 11 / 1 &94 .... • 01-6739-062b[l] ASTM E84 ""'• Ol/lb/95 ;•,��; .••. Trinity Engineering 7050.02.96-1 TAS 114 0400 611141960000 P36700.04.12 ASTM D 1623 ..'.. • (?4,;tZ?2 P39740.02.12 TAS 101 • • • • • • 02/24/12 • •. •.. , • TAS 123 ` 0 0 0006:6 • • • • • • Celotex Corp. Testing Services 528454-2-1 TAS 101 • • • to/;S 8 • 528454-9-1 0000 528454-10-1 520109-1 TAS 10I 12/28/98 520109-2 520109-3 520109-6 520109-7 520191-1 TAS 101 03/02/99 520109-2-1 LmTATIONS: 1. Fire classification is not part of this acceptance. Refer to the Prepared Roof Tile Assembly for fire rating. 2. ICP Adhesives Polyset' AH-160 shall solely be used with flat, low, & high tile profiles. 3. Minimum underlayment shall be in compliance with the Roofing Application Standard RAS 120. 4. Roof Tile manufactures acquiring acceptance for the use of ICP Adhesives Polyset® AH-160 roof the adhesive with their the assemblies shall test in accordance with TAS 101. 5. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and Rule 61 G20-3 of the Florida Administrative Code. NOA No.: 17-0322.03 Expiration Date: 05/10/22 Approval Date: 04/27/17 Page 3 of 11 INSTALLATION: 1. ICP Adhesives Polyset' AH-160 maybe used with any roof tile assembly having a current NOA that lists attachment resistance values with the use of ICP Adhesives Polyset® AH-160. 2. ICP Adhesives PolysetO AH-160 shall be applied in compliance with the Component Application section and the corresponding Placement Details noted herein. The roof tile assembly's adhesive attachment with the use of ICP Adhesives Polyset` AH-160 shall provide sufficient attachment resistance to meet or exceed the resistance value determined in compliance with Miami -Dade County Roofing Application Standards RAS 127.. The adhesive attachment data is noted in the roof tile assembly NOA. 3. ICP Adhesives Polyset' AH-160 and its components shall be installed in accordance with Roofing Application Standard RAS 120, and ICP Adhesives and Sealants, Inc.'s Operating Instruction and Maintenance Booklet: 4. Installation must be by a Factory Trained 'Qualified Applicator' approved and licensed by ICP Adhesives and Sealants, Inc. ICP Adhesives and Sealants, Inc. shall supply a list of approved applicators to the aut]0111� having • • • • • jurisdiction. • 5. Calibration of the ICP Adhesives Foam Dispenser RTF1000 dispensing equipment is regaled before app4cation►...:. of any adhesive. The mix ratio between the "A" component and the "B" component shafl'tV fnaintainecd between 4 goo. 1.0-1.15 (A): 1.0 (B). • .... . ..... 6. ICP Adhesives Polyset AH-160 shall be applied with ICP Adhesives Foam DispensenRTFti1000 o JLP. • . •; • • • Adhesives ProPack' 30 & 100 dispensing equipment only. • • • • .. . 7. ICP Adhesives Polyset' AH-160 shall not be exposed permanently to sunlight. ; • • • • • 8. Tiles must be adhered in freshly applied adhesive. Tile must be set within 1 to 2 minutCs a jt% ICP AcMMesLVes .. ...... Polyset' AH-160 has been dispensed. .. . . � � • .... 9. ICP Adhesives Polyset AH-160 placement and minimum patty weight shall be in accordance with the 'Placement Details' herein. Each generic tile profile requires the specific placement noted herein. MIAMI-DAne COUNTY NOA No.: 17-0322.03 Expiration Date:032203 Approval Date: 04/27/17 Page 4 of 11 Table 1: Adhesive Placement For Each Generic Tile Profile Tile Profile Placement Detail Minimum Paddy Contact Minimum Paddy Gram Area Weight Eave Course - Flat, Low, High All Eave Course 17-23 sq. inches 45-65 Profiles Flat, Low, High Profiles 41 17-23 sq. inches 45-65 Flat Profile #2 10-12 sq. inches 30 Low Profile #2 12-14 sq. inches 30 High Profile #2 17-19 sq. inches 30 Flat, Low, High Profiles 43 Two Paddys: 8-9 sq. inches at .12 graA-A.par padd3s.. head of tile 9-11 sq. inches at • overlap •••••• • • • • • .. •• ••• Two -Piece Barrel (Cap Tile) Two Piece 2 Beads (1 each longitudinal .... 17 grams ver bead:" edge) 20-25 sq. inches each bead • • • • • • •••• •• ••• Two Piece Barrel (Pan Tile) Two Piece 65-70 sq. inches •; •34 grams under pan . . . . ...... LABELING: • All approved products listed herein shall be labeled and shall bear the imprint or identifiable marking of the manufacturer's name or logo and following statement: "Miami -Dade County Product Control Approved" or the Miami - Dade County Product Control Seal as shown below. I IMM3AOE COUNTY BUILDING PERMIT REQUIREMENTS: As required by the Building Official or applicable building code in order to properly evaluate the installation of this system. NOA No.: 17-0322.03 MIAMI-DADE COUNTY Expiration Date: 05/10/22 Approval Date: 04/27/17 Page 5 of 11 0 ADHESIVE PLACEMENT DETAIL # I Nail ti rouplr. plastk camont Paddy tsancathT+€aa t. r.quirudl., .•h,.-, loin Optimal Nail lhroughptasiic mmeni }when requlred� 41 �� � [`•�"•..ti _ r � 1p�+#�ty dg+nrgth Tiirl r ., � rn.wlai: ''•� - -tip �„_ '• ` '•v,/� . Battesss opRlalnal t` • ^,� - .' ,�='• 1 i^Y`. •� •���-•._".` r.�3':.f �a� .ram -` '"�' �Oir« �' Sin• �.- ya�"� •,,4, ti �`�r+''va5''��,-1::..-: biYO CiCd11f11 Fascia NO IluogRr Flo* e.rp+trr �whenrequired} '` �.,�-_:�addlrl$�hr+ehTllirl ,, = ' — >_ U+Id>Rrt•y+in•+tt ';�``•.i "ti, y,-f - fry-.�� `' •''•-, r j ;1 �=-'•' s� �r Fn IF EavCausse `ti r iliClr7 Weephafe t01ri -•... ��in• ,,-•�=' �¢'�Q�` +'� Eamctlosuec brlpadq• MIAMI•DADE COUNTY �jaj"O'vl Flat/Low Profile Tile 1. Starting at the cave course, apply a minimum 2" (50.8 mm) x 10" (254 mm) x 1" (25.4 mm) foam paddy onto the underlayment positioned as shown, under the strengthening rib closest to the Overlock of the tile being set. 2. Continue in same manner. Insure approximately 17 (109.7 cm2) — 23 (148.4 cm) square inch adhesive contact with the underside of the tile.... • • • •••• •••••• •••••• •• •••••• • Medium Profile / Double Ilari the • • � • • - •• •• •• • •••••• I . Starting at the cave coq" apply a minimum 2" • • (50.8 mm) x 10" (254 r4m)*x I" (25,A mrn) foam....:. paddy onto the underlaymeni: ositione� as shown - under the pan portion of gv� ti� closes ;to -tie • • • • overlock of the tile being set. 0969 2. Continue in same manner. Insure approximately 17 (109.7 cm) — 23 (148.4 cm2) square inch adhesive contact with the underside of the tile. High Profile / Single Pan Tile l . Starting at the cave course, apply a minimum 2" (50.8 mm) x 10" (254 mm) x 1" (25.4 mm) foam paddy onto the underlayment positioned as shown under the pan portion of the tile closest to the overlock of the tile being set. 2. Continue in same manner. Insure approximately 17 (109.7 cm') — 23 (148.4 cm') square inch adhesive contact with the underside of the tile. NOA No.: 17-0322.03 Expiration Date: 05/10/22 Approval Date: 04/27/17 Page 6 of 11 ADHESIVE PLACEMENT DETAIL # 2 043thmuyhpraol&40maet PtWyI-S.nM7hTile) t'!•tfln rQlrUllCdi� ,r'"`•-.4 uedatLymaaa 8netansapb3onar .r�V ''�" � '� :� Eawtourio ,� `�-``,•.. fir r .�� r�sda Nail throwah Rustic ctmen4 ;when regniredl -Paddy jaantmhlift) und.rF.y»+ane r _ # ``-,. 2 in. ate. �� � • l _ fir"-w�, . � �..• Battens orylional C_FAV*0A$i rV Flat/Low Profile Tile Starting at the eave course, apply a minimum 2" (50.8 mm) x 10" (254 mm) x 1" (25.4 mm) foam paddy onto the underlayment positioned as shown under the strengthening rib of the tile closest to the overlook of the tile being set. Insure approximately 17 (109.7 cm'-) — 23 (148.4 cm2) square inch adhesive contact with the underside of the tile. 2. At the second course, apply a minimum 2"(50.8mm) x 7" (177.8 mm) x 1" (25.4 mm),foam paddy onto the underlayment positioned a§; 4iji under tl ; strengthening rib closest tqthgayerlock of jhe tile being set. 0 0 * 0 • • 0 0 0 • • .... . ..... 3. Continue in same manner. farm approxim;ftjy IV • • • • (64.5 cm2) - 12 (77.4 cm2) SQuM inch adifestve • • • •; • contact with the underside M18 file. . . . . ...... Medium Profile / Double Pan Tile •.;., • Starting at the eave course, apply a minimum 2" (50.8 mm) x 10" (254 mm) x 1" (25.4 mm) foam paddy onto the underlayment positioned as shown under the pan portion of the tile closest to the overlock of the tile being set. Insure approximately 17 (109.7 cm2) — 23 (148.4 cm2) square inch adhesive contact with the underside of the tile. 2. At the second course, apply a minimum 2" (50.8mm) x 7" (177.8 mm) x 1" (25.4 mm) foam paddy onto the underlayment positioned as shown under the pan portion of the tile closest to the overlock of the tile being set. 3. Continue in same manner. Insure approximately 12" (77.4 cm2) - 14 (90.3 cm2) square inch adhesive contact with the underside of the tile. (Instructions continued on next page) NOA No.: 17-0322.03 Expiration Date: 05/10/22 Approval Date: 04/27/17 Page 7 of 11 ADHESIVE PLACEMENT DETAIL # 2 (CONTINUED) hallthfougllpEsSlktagiant- � Y Rid�tl$vt�lhTilr) jwhaaroquItad) 'r Eave Cawsr -- / fascia 4• � 1Y••phd• 1 o ram. • 2 �n. MIAMI-DADE COUNTY ,...s , - High Profile / Single Pan Tile Starting at the eave course, apply a minimum 2" (50.8 mm) x 10" (254 mm) x 1" (25.4 mm) foam paddy onto the underlayment positioned as shown under the pan portion of the tile closest to the overlock of the tile being set. Insure approximately 17 (109.7 cm2) — 23 (148.4 cm2) square inch adhesive contact with the underside of the tile. ••tt• 2. At the second course, applsf a minimum 2e ( 0.8mm)e 0 a x 7" (177.8 mm) x l" (25.4nrm)%foam paddypnto the • underlayment positioned attft)Wn under the'pan • • • • • • portion of the tile closest MM blverlock oithe tile :....: being set- • • • • • • .... . ..... ...... .. . ..... 3. Continue in same manner. j;ft ,"appro!t r%dly 17"6.0 0 • (109.7 cm') - 19 (122.6 cm2 ,sgware inch adhesive contact with the undersideof the Zile. . . 0 0 90:0 • • • • • • NOA No.: 17-0322.03 Expiration Date: 05/10/22 Approval Date: 04/27/17 Page 8 of 11 i ADHES1vE PLACEMENT DETAIL # 3 rail through plastic cement Par (between Ines) (when requlredF Battensoptlonal ° ° paddy (under tile) ai op oofaM. jf 4 x 41n. ` Si le id undcrtl single paddy' , on undedayment 2 x 41n. s O dP L IT 101n. c`yy- Fascia -Eavee(osure l:fat/Low Profile Tile Nail throughplast)coement Single paddy undertile (when required) Paddy !between idles) Battens Paddy (under tlle) optional T SkH iepaddy _ on top oftile� %� x4(n. 2x41n. single paddy on un flayinel{t a a`. a in 21n EawClosure Eave Course Easda Medlum ProflieTile 1. On the cave course only, apply a minimum 2" (50.8 mm) x 10" (254 mm) x 1" (25.4 rum) foam paddy onto the underlayment positioned as shown, under the strengthening rib for flat tile or under the pan portion of the tile for low or high profile tile closest to the Overlock of the tile being set. Leave approximately 4" (101.6 mm) up from the cave edge free of foam to prevent the expanded adhesive from blocking the weep holes. Insure approximately 17-23 inz (109.7-148.4 Vd) of adhesive contact with the underside`gf 4v*tile ...... ...... .. ...... 2. Apply a 4" (101.6 mm)-x 4i'1401.6 mmj x 1" (2-%4... mm) foam paddy onto ttfe'MderlayiU at;ist beldw the second course line positioned foam paddy •: •. under the strengthening ri for flat t>!l�:e �nnder tHe* pan portion of the tile, glp %t to the underlock for . • the second course tile to be'ingtalled. Insure ....,. approximately 8-9 in- (i 1.648.1 cm;J off' adhesive contact with the underside -of the tile,- ° • • ° • ° (Instructions continued on nett page) NOA No.: 17-0322.03 Expiration Date: 05/10/22 Approval Date: 04/27/17 Page 9 of 11 y ADHESIVE PLACEMENT DETAIL # 3 (CONTINUED) Nan through plastic ceSingle paddy under tile (when required) Paddy (between Was) Battenoptimal �r� Paddy (undertiiei �onai <<�� Y sing]epaddy onundeer4iytnen 4x4in. Swe 2x4in.,x� paddy on top of the -" Eave Course — .�. Faada Weephoie 10 in. .12 in. Eave dosure Drip edge HighProf [#Tlle M)AMt•DADIE COUNTY ��� ....! 3. Also apply a 2" (50.8 run) x 4" (101.6 mm) x 3/a" (19 mm) paddy on top of the eave course tile surface as shown, on top of the strengthening rib for flat tile or on top of the pan portion of the tile, closest to the underlock of the first course of tile. Install second course of tile. Insure approximately 9 (58.1 cnO) - 11 (71 cm2) square inch adhesive contact with the underside of the the at the overlap and 7 (45.2 cm2) - 9 (58.1 cm2) square inch adhesive contact with the underside.&*ffit.tile at the head of the tile. Coatinitein same'manner. •• ! r•r.•• •••! • lop • • .•••!• NOA No.: 17-0322.03 Expiration Date: 05/10/22 Approval Date: 04/27/17 Page 10 of 11 ADHESIVE PLACEMENT DETAIL Two PIECE BARREL 1) Place enough adhesive toachieve 65to70sq.in. Steep pitch applications In contact with the pan tile. (when required) 2) Turn covers upside down. Place adhesive In to 1 In. from outside edge of cover tile. Then instals the tile. Ensure 20 to 25 sq. in. contact area. a Underlayment�� o e Ito 0 Eave closure (motar shown) Fascia Remove top portion of the eave course cover t(te.A6ut to second course of pan tiles. Ensure eave end of pan and cover tiles are flush at eave line. Two Piece Barrel - High Profile Tile MIAMI•DADE R)"I TY ...s t . Two Piece Barrel (Cap and Pan) Tile 1. Starting at the cave course, apply a minimum 2" (50.8 mm) x 10" (254 mm) x 1" (25.4 mm) foam paddy onto the underlayment positioned as shown under two adjacent pan tiles. Support cave tiles from rocking until adhesive has a chance to cure. .... 2. Continue in same mapnerpringing jjvp pan ...... courses up toward th8 ridgy Insure.. .' approximately 65 (41A4vcm2) — 70 (4N i6 cm2� �. square inch adhesiveco;mA with the undersid;.... ; of the pan tile. • • • • • .... . ..... 3. Turn covers upside d0� 0kposing .e 6dersia;00a of the tile. Apply a mjrlipa4r4i 1" (25.%m* m) x 10' : • (254 mm) bead of ad4esite jiirec4 on the inner...;. edge of each side of the cover the or-Wd' . . approximately 3/4" (f4 elm; to 1"e(25.4 mm) : • 0 •: from the outside edge of the tile, inwutd, free of foam to allow for expansion. 4. Turn cover tile over after foam is applied and place onto pan the course. Insure a minimum of 20 (129 cm2) - 25 (161.3 cm2) square inch contact area on each side of the cover tile to the pan tile. Continue in same manner. Trim away any cured exposed foam adhesive. Pointing of longitudinal edges of the cover tiles are considered optional. 5. When additional nailing is required, 2" (50.8 mrn) x 4" (101.6 mm) nailers or the tie wire system using galvanized, stainless steel, or copper wire and compatible nails may be used. END OF THIS ACCEPTANCE NOA No.: 17-0322.03 Expiration Date: 05/10/22 Approval Date: 04/27/17 Page 11 of 11 MIAMEDiADE DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) BOARD AND CODE ADMINISTRATION DIVISION NOTICE OF ACCEPTANCE (NOA Boral Roofing LLC. 7575 Irvine Center Drive, Suite 100 Irvine, CA 92618 MIAMI-DADE COUNTY PRODUCT CONTROL SECTION 11805 SW 26 Street, Room 208 Miami, Florida 33175-2474 T (786) 315-2590 F (786) 315-2599 www.tniamidade.2ov/economy SCOPE: This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ). This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section (In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have ttis product or material tested for quality assurance purposes. If this product or material fails td Ko in cc tad • P q tY PmP P D� .a pP manner, the manufacturer will incur the expense of such testing and the AHJ may immedia WVorevoke, modl£; or ....:. suspend the use of such product or material within their jurisdiction. RER reserves the right tamwoke this acceptanoeJ� if it is determined by Miami -Dade County Product Control Section that this product or mat;titLf foils to Cqe,.e4�e • requirements of the applicable building code. 0000 • • • • • This product is approved as described herein, and has been designed to comply with the Flo> a1 1;uilding6Cuao including the High Velocity Hurricane Zone of the Florida Building Code. : : 0 : : 0 0 0 • 00000 . DESCRIPTION: BORAL TileSeal •• • . •• LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state antl ftAlowing statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein. RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product. TERAIINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of NOA. ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done in its entirety. INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official. This new NOA consists of pages 1 through 4. The submitted documentation was reviewed by Alex Tigera. NOA No.: 18-0502.03 Expiration Date: 08/02/23 Approval Date: 08/02/18 Page 1 of 4 ROOFING COMPONENT APPROVAL Category: Roofing Sub -Category: Underlayment Material: SBS PRODUCTS DESCRIPTION: Product Dimensions BORAL TileSeal 36" x 36' rolls 36" x 72' rolls Boral Citadel Plus 36" x 72' rolls MANUFACTURIGN LOCATION: 1. Brentwood, NH. 2. Houston, TX. EVIDENCE SUBMITTED: Test Agency PRI Construction Materials Technologies, LLC. Trinity ERD Test Product Specification Description TAS 103 SBS self -adhering asphalt sheet material with a ASTM D1970 white glass re -enforced polyester surfacing fabric; for use as an underlayment in sloped roof assemblies. ASTM D 1970 Test Identifier OCF-3 56-02-04 OCF-356-02-02 OCF-356-02-01 OCF424-02-04 OCF-424-02-01 OCF-424-02-03 BRLRF-SC 16810.11.17 SBS self -adhering asphalt sheet material with a poly film -facer; for use as a mid -ply jui4erlayment in sloped roof assemblies.. • * 0 0 0 • • • • • • • . . ...... .. ****% .... ...... .... % . ..... .. . ..... .. .. .. . ...... Test Name/Report : • • •:Date • • • • • • ASTMD1623•••• 47/25/1&••••� TAS 103 • • 401 /24/18 ASTM D1970 07/26/18 ASTM D1623 07/25/18 ASTM D1970 07/25/18 TAS 103 07/25/18 ASTM D 1876 11/28/17 NOA No.: 18-0502.03 Expiration Date: 08/02/23 Approval Date: 08/02/18 Page 2 of 4 APPROVED ASSEMBLIES: Deck Type 1: Wood, non -insulated Deck Description: 15/32" or greater plywood or wood plank System E(1): Anchor sheet mechanically fastened deck, membrane adhered. Base Sheet: One or more plies of ASTM D226 Type H or ASTM D2626 with a minimum 4" head lap and a 6" end lap mechanically fastened to deck with approved nails and tin caps 6" o.c. at the laps and two staggered rows 12" o.c. the field of the roll. Ply Sheet Apply one layer of Boral Citadel Plus over Base sheet as per current approval. (Optional): Membrane: One or more plies of BORAL TileSeal Underlayment with a minimum 3" head lap and minimum 6" end lap. Place the first course of membrane parallel to the eave, rolling the membrane to obtain maximum contact. Remove the release membrane as the me,}Ul cane is applied. Vertical strapping of the roof with BORAL TileSeal Underlayment is Ur.QPt'able. AIL... end laps and laps without black selvage area shall be sealed under ialrusiq*ig an SB6 modified • mastic. •••••• •• •••••• Note: When used in Tile roof systems BORAL TileSeal Underlayml M *shall be:b�-nailed to • • • • deck with approved annular ring shank nails and tin caps at a maxio.c. gt t}Le side • •; • • • laps. No nails or tin caps shall be exposed. • .. .. .. . ...... Surfacing: Approved for Adhered Roof Tile using TILE BOND or AH-160, Aechantcally jjt�;jd Roof • • • • Tile, Metal Roofing, Wood Shake & Shingles, and Asphaltic Shingle 49(WnblieS. ; • • • • ; NOA No.: 18-0502.03 Expiration Date: 08/02/23 Approval Date: 08/02/18 Page 3 of 4 LIMITATIONS: 1. Fire classification is not part of this acceptance. 2. This acceptance is for prepared roofing applications. Minimum deck requirements shall be in compliance with applicable building code. BORAL TileSeal underlayment shall be installed in strict compliance with applicable Building Code. 3. BORAL TileSeal underlayment shall be applied to a smooth, clean and dry surface with deck free of irregularities. 4. BORAL TileSeal underlayment shall not be applied over an existing roof membrane as a recover, but may be applied over a roofing Base/Anchor sheet underlayment. 5. BORAL TileSeal underlayment shall not be left exposed as a temporary roof for longer than 180 days of application. 6. The standard maximum roof pitch for BORAL TileSeal underlayment shall be 6:12 when tiles are loaded directly to the BORAL TileSeal underlayment; loading boards or battens are required on roof pitches greater than 6:12". 7. Refer to Prepared Roofing system Product Control Notice of Acceptance for listed approval of this product with specific prepared roofing products. 8. Tiles shall be stored on battens on roof pitches greater than 6:12". ' . . .... ...... 9. BORAL TileSeal underlayment may be used with any approved roof covering Notice of'Acc;tanc(! TiSLint BORAL TileSeal underlayment as a component part of an assembly in the Notice of Acceeance. If BOIL TileSeal underlayment is not listed, a request may be made to the Authority Having Jurli j �;� o*n (A p o%the ; • • • • Miami -Dade County Product Control Department for approval provided that appropriafh,,4(agJinentaZ?WV ..... provided to detail compatibility of the products, wind uplift resistance, and fire testing Iasi U0 Y. ..:..' 10. All nails in the deck shall be carefully checked for protruding heads. Re -fasten any loose deLking pa*Ae1s.' Sweep the deck thoroughly to remove any dust and debris prior to application. 99 •. . . ....... 11. When applying the membrane in the valley, start at the low point and work to the high point,.rolling:fl8Wmbraiae from the center outward in both directions. For ridge applications, center the membrane end roll from t)!a center:"": • outward in both directions. • • • • 12. Roll or broom the entire membrane surface so as to have 100% contact with the surface, giving special attention to overlap areas. 13. Flash vent pipes, stacks, chimneys and penetrations in compliance with Roof Assembly current Product Control Notice of Acceptance and applicable Building Code. 14. All protrusions or drains shall be initially taped with a 6" piece of underlayment. This target piece shall be pressed in place and formed around the protrusion to ensure a tight fit. A second layer of BORAL TileSeal underlayment shall be applied over the underlayment, and sealed using an SBS modified mastic. 15. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and Rule 61 G20-3 of the Florida Administrative Code. 16. All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or logo, city and state of manufacturing facility, and the following statement: "Miami -Dade County Product Control Approved" or the Miami -Dade County Product Control Seal as shown below END OF THIS ACCEPTANCE NOA No.: 18-0502.03 Expiration Date: 08/02/23 Approval Date: 08/02/18 Page 4 of 4 Miami -Dade County HVHZ Electronic Roof Permit Form Section C Page (Low Slope BUR Roof Systems) Fill in the specific roof assembly components. If a component is not required, insert not applicable (n1a) in the text box. Roof System Manufacturer.] POLYGLASS USA Base Sheet(s)] Product Approval (NOA): 1E Tj��k I NOA System Type] [Wind Q;fflft Pressures, - Fibm'RAS,128'rorSealed Cdkulafidns. (PI) Field: 42 psf (P2) Perimeters: psf ELA,S,TOB I ASE Base Sheet Fastener/ Bonding Material: . . ... . ... ... ..... 11/4RS NAILS. - Ply Sheet(s): psf ELAS.T0FL.EX.SA V�_7777 Maximum Design Pressure From NOA:152.5 psf Ply Sheet Fastener Bonding Wa-t-er-ii-1-� (P2) Perimeter (a') Size: ft. r(P3) Corner Size: (X) a' SELF ADHERED 7 - L Roof Slope: Roof Mean Height: ft. I Top Ply Sheet. IParapet S: E]No [:]Yes jParapet wall Height: 5/8" Plywood Deck- LWIC Manufacturer:[7 - - - - Compressive Psi Support Spacing:ft. 01C Strength: - Existing Roof (For Recovers Only): ire arner. Vapor Barrier] Anchor Sheet] Anchor Sheet Fastener / BondingMaterial: 7777 Insulation Base Layer Size & Thickness: Insulation Base Layer Fastener/ Bonding Material: Insulation Top Layer Size & Thickness. Insulation Top Layer Fastener / Bonding Material: ------ - ---- POLYFLE.X.-SA _PFR...__ Top Ply Sheet -Fastener/ Bo&Wrig.114teriaI5. ... SE16ra - ADI-WRED Optiojijl.�rfacing; some Fastener Spacing krf!se Sheet Attachment: 0 0 0 Lap Spacing see 0 0 000000 _8 EEin. o/c lilRow • :::F lin. o/c m (P2) Perimeter: ❑6 in. o/c [ERow(s) [E in. o/c F6 ]in. o/c. F4 ] Row(s) F6 I in. o/c Wood Nailer Type and Size: Wood Nailer Fastener Type and Spacing: g. 7 . .. .... Edge Metal 3" Face 26 Gauge - SELECT EDGE METAL HOOK STRIP SIZE I Edge Metal Attachment: I Number of Fasteners per Insulation Board: r_11 Field: 1--.- . ......... ! Parapet Coping Metal Attachment: I Reset Form Print Far MIAM. bl-D-A—OE) N R Ba's-a- 57-,hee4 Min. mu'Qade County -IEW-,HJZ Plectromic Boor Permit Form lglus'[(raft COMP, -0, nsfltz. NOted and Defaft as Applicable: =:�� . DFIP- Nwetau ..000 0 . •0 00 • 0..0 'Drip Metal: 0000 PX3 GALV 26 GA Surlkdng: Top Ply: JPOLYFLEXSA P FR F ELASTOFLEX SA V Base Sheet: JELASTOBASE Dock Type: 5/8 CDX PLYWOOD I ' �11l�MFtlE j� NIIAMI-DADE COUNTY mowi3liliJ>11 PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND .ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 T (786) 315-2590 F (786) 315-2599 NOTICE OF ACCEPTANCE (NOA) www.miamidade.2ov/economy Polyglass USA, Inc. 150 Lyon Drive Fernley, NV 89408 SCOPE: This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ). This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section (In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to ha vc�s product or material tested for quality assurance purposes. If this product or material fails to:perJ%m in the 2teepted • • • • • • manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, iht) . or • • .. ... .. ...... suspend the use of such product or material within their jurisdiction. RER reserves the rigl}ttr� y oke this �cceptan ce, • if it is determined by Miami -Dade County Product Control Section that this product or mate.;;1 fails to feet the • • • • • • requirements of the applicable building code. ' ....' :see** 66669 This product is approved as described herein, and has been designed to comply with the Florida $uilding.Gode ..:.. • including the High Velocity Hurricane Zone of the Florida Building Code. • • • • • • • • • • • • . . . . ...... DESCRIPTION: Polyglass Self -Adhered Roof System over Wood Decks • • • • • • . . . ...... LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state Ltlefalfowing statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein. RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product. TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of NOA. ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done in its entirety. INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official. This NOA revises NOA# 17-1016.01 and consists of pages 1 through 38. The submitted documentation was reviewed by Alex Tigera. NOA No.: 19-0311.04 Expiration Date: 10/11/22 Approval Date: 03/21/19 Page 1 of 38 ROOFING ASSEMBLY APPROVAL Category: Roofing Sub -Category: Modified Bitumen Materials SBS/APP/TPO Deck Type: Wood Maximum Design Pressure -112.5 psf TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT: TABLE 1 Test Product Dimensions Specification Polyanchor 250' x 48" ASTM D 4601, Type H Polyglass G2 Base 108' x 36" ASTM D 4601, Type H Elastoshield HT 65' 8" x 3' 3-3/8" ASTM D 6162 XtraFlex SBS HT 65' 8" x 3' 3-3/8" ASTM D 6162 Base 650 Elastobase 65' 2" x 3' 3-3/8" ASTM D 6163, Type I Elastoflex SA V 66' 8" x 3' 33/8" ASTM D 6163, Type I Elastoflex SA V FR 66' 8" x 3' 3-3/8" ASTM D 6163, Type I Elastoflex SA V 66' 8" x 3' 33/8" ASTM D 6163, PLUS Type I Elastoflex SA V 66' 8" x 3' 3-3/8" ASTM D 6163, PLUS FR Type I XtraFlex SBS Base 66' 8" x 3' 3 3/s" ASTM D 6163, SA Type I XtraFlex SBS Glass 65' 8" x 3' 3-3/8" ASTM D 6163, Base Type I Elastobase P 65' 8" x 3' 3-3/8" ASTM D 6164, Type I Elastoflex SA P 32' 10" x 3' 3-3/8" ASTM D 6164, Type I Product Description A polymer woven, high performance, synthetic base sheet. Asphalt -coated fiberglass reinforced baSe,s*et .... • 9.0 . 000 ... .. ...... SBS modified asphalt coat.e �1•.Jberglass/polyester reinforced base sheet. 0000 • • • • • • SBS modified asphalt coatetl'Plberglassfpolyester • • • • • reinforced base sheet. """ " ' • • • • • . . .. .. .. . ...... SBS modified asphalt coatedfibarglass reinforced • • base sheet. ...... Self -adhered, fiberglass rehlVcgd, SB modified bitumen membrane with a self -adhering b:gt face and a smooth top surface. Self -adhered, fire -rated, fiberglass reinforced, SBS modified bitumen membrane with a self -adhering back face and a smooth top surface. Self -adhered, fiberglass reinforced, SBS modified bitumen membrane with a self -adhering back face and a smooth top surface. Self -adhered, fire -rated, fiberglass reinforced, SBS modified bitumen membrane with a self -adhering back face and a smooth top surface. Self -adhered, fiberglass reinforced, SBS modified bitumen membrane with a self -adhering back face and a smooth top surface. SBS modified asphalt coated fiberglass reinforced base sheet. SBS modified asphalt coated polyester reinforced base sheet. Self -adhered, fiberglass reinforced, SBS modified bitumen membrane with a self -adhering back face and a granule top surface. NOA No.: 19-0311.04 Expiration Date: 10/11/22 Approval Date: 03/21/19 Page 2 of 38 Elastoflex SA P FR 32' 10" x 3' 3-3/8" ASTM D 6164, Self -adhered, fire -rated, polyester reinforced, SBS Type I modified bitumen membrane with a self -adhering back face and a granule top surface. Polyfresko G SBS SA 32' 10" x 3' 33/8" ASTM D 6164, Self -adhered, fiberglass reinforced, SBS modified Type I bitumen membrane with a self -adhering back face and a granule top surface. Polyfresko G SBS SA 32' 10" x 3' 33/8" ASTM D 6164, Self -adhered, fire -rated, fiberglass reinforced, SBS FR Type I modified bitumen membrane with a self -adhering back face and a granule top surface. Polyreflect 32' 10" x 3' 33/8" ASTM D 6164, Self -adhered, polymer, SBS modified bitumen Type I membrane with a self -adhering back face and a smooth top surface. XtraFlex SBS G SA 32' 10" x 3' 3-3/8" ASTM D 6164, Self -adhered, fire -rated, polyester reinforced, SBS Type I modified bitumen membrane with a self -adhering back face and a granule top surface. ."". . . Polybond 32' 10" x 3' 3-3/8" ASTM D 6222 ... ...... Torch applied, polyester relax rdid, APJ..modified • bitumen membrane with a band vff polyethy14he bao6 .. % face and a smooth or sandetrWSurface. • Polyflex 32' 10" x 3' 3-3/8" ASTM D 6222 ...... Torch applied, polyester rd%§Q&pt'd, A+trltlttified • +� bitumen membrane with a bmx off polyethylene back ; .. • face and a smooth or sander} top surface.•• ....�. XtraFlex APP S 32' 10" x 3' 3-3/8" ASTM D 6222 Torch applied, polyester rQ,jnfdrejd, AP.P modified • �� bitumen membrane with a burn pff pol3jtfl jlbhe ba4 face and a smooth or sanded tiop eurfaca. .. V • • • . PolyKool 32' 10" x 3' 33/8" ASTM D 6222, Self -adhered, polyester reinforced, APP modified Type I bitumen membrane with a self -adhering back face and a white film laminate on the top surface. XtraFlex Kool APP S 32' 10" x 3' 33/8" ASTM D 6222, Self -adhered, polyester reinforced, APP modified SA Type I bitumen membrane with a self -adhering back face and a white film laminate on the top surface. Polyflex SA P 32' 10" x 3' 33/8" ASTM D 6222, Self -adhered, polyester reinforced; APP modified Type I bitumen membrane with a self -adhering back face and a granule top surface. Polyflex SA P FR 32' 10" x 3' 33/8" ASTM D 6222, Self -adhered, fire -rated, polyester reinforced, APP Type I modified bitumen membrane with a self -adhering back face and a granule top surface. Polyfresko G APP SA 32' 10" x 3' 3 3/a" ASTM D 6222, Self -adhered, polyester reinforced, APP modified Type I bitumen membrane with a self -adhering back face and a granule top surface. Polyfresko G APP SA 32' 10" x 3' 33/8" ASTM D 6222, Self -adhered, fire -rated, polyester reinforced, APP FR Type I modified bitumen membrane with a self -adhering back face and a granule top surface XtraFlex APP G SA 32' 10" x 3' 33/s" ASTM D 6222, Self -adhered, fire -rated, polyester reinforced, APP Type I modified bitumen membrane with a self -adhering back face and a granule top surface. NOA No.: 19-0311.04 Expiration Date: 10/11/22 Approval Date: 03/21/19 Page 3 of 38 Polyglass APP Base 65' 8" x 3' 33/8,, ASTM D 6509, APP modified asphalt coated fiberglass reinforced Type I base sheet. PG 100 1, 33 5, 50, 55 gal, ASTM D41 A penetrating solution of solvent and a blend of tube or 17 oz. spray selected asphalts used to promote adhesion. can PG 350 1, 3, 5, 50, 55 gal. or ASTM D3019 A fibered rubberized adhesive designed for use with tube Type III modified bitumen membranes. PG 400 1, 3, 5, 50, 55 gal. or ASTM D4586 A thick, fibered, rubberized flashing cement for use in tube ASTM D3409 dry or damp conditions. PG 425 1, 3, 5, 50, 55 gal. or ASTM D4586 A thick, fibered, rubberized flashing cement for use in tube ASTM D3409 dry or damp conditions. PG 450 1, 3, 5, 50, 55 gal. or ASTM D4586 A thick, fibered, rubberized flashing cement. tube PG 500 1, 3, 5, 50, 55 gal. or ASTM D4586 A thick, fibered, rubberized flashing cement for use tube with modified bitumen membranes. •. • Y POLYPLUS 35 1, 3, 5, 50, 55 gal. or ASTM D3019 Y • •••••• •••••• A fibered rubberized adhehAO� • dsigned far uge with • tube Type IlI • modified bitumen membranes•• •.: •.•.:. POLYPLUS 45 1, 3, 5, 50, 55 gal. or ASTM D4586 A thick, fibered, rubberize Djj"liing cement. �....� tube • •••••• .... . ..... POLYPLUS 50 1, 3, 5, 50, 55 gal. or ASTM D4586 A thick, fibered, rubberized:1114ing cegeiatofpr use• • •. • tube with modified bitumen membranes. . XtraFlex 10 1, 3, 5, 50, 55 gal, ASTM D41 A penetrating solution of solvent and a•blend of •...;. tube or 17 oz. spray .s•..• selected asphalts used to aorggt; adhesion. can .• • • • • . . . XtraFlex 35 1, 3, 5, 50, 55 gal. or ASTM D3019 A fibered rubberized adhesive designed for use with tube Type III modified bitumen membranes. XtraFlex 50 Premium 1, 3, 5, 50, 55 gal. or ASTM D4586 A thick, fibered, rubberized flashing cement for use Modified Wet/Dry tube with modified bitumen membranes. Cement WB-3000 5 gallon pail Proprietary A low-VOC, water -based acrylic primer to enhance adhesion of self -adhered membranes. NOA No.: 19-0311.04 MIAMI•DADE COUNTY Expiration Date: 10/11/22 �Fgamenqu Approval Date: 03/21/19 Page 4 of 38 APPROVED INSULATIONS: TABLE 2 Product Name Product Description Manufacturer (With Current NOA) Polytherm-H Polyisocyanurate foam insulation Polyglass USA, Inc. Polytherm Polyisocyanurate foam insulation Polyglass USA, Inc. Polytherm G Polyisocyanurate foam insulation Polyglass USA, Inc. XtraFlex Polyiso Polyisocyanurate foam insulation Polyglass USA, Inc. XtraFlex Polyiso G Polyisocyanurate foam insulation Polyglass USA, Inc. ACFoam-H Polyisocyanurate foam insulation Atlas R(;6fing Corp • • • • • ACFoam-III Polyisocyanurate foam insulation • • • Atlas Ro ?ir?g �orp . Structodek High Density Fiberboard Roof Wood fiber insulation board ...... ..... Bite 0idge Fiberboard, I$c,• • • ; Insulation • • • • ' DensDeck, DensDeck Prime Gypsum insulation board Geo'r*a-Pacific Gypsum Lr(; • • ... .. .. ..... H-Shield Polyisocyanurate foam insulation . • ikLer Par 4-, LLC ... • • H-Shield CG Polyisocyanurate/perlite composite insulation •Ni nter P;nels.LLC ...,; • ENRGY-3 Polyisocyanurate foam insulation JphDs Manville Corp. ; • •; Fesco Board Expanded mineral fiber Johns MartyilJ��orp. Multi -Max FA-3 Polyisocyanurate foam insulation Rmax Operating, LLC. SECUROCK Gypsum -Fiber Roof Board Fiber reinforced coverboard United States Gypsum Corporation NOA No.: 19-0311.04 Expiration Date: 10/11/22 Approval Date: 03/21/19 Page 5 of 38 APPROVED FASTENERS: TABLE 3 Fastener Product Product Manufacturer Number Name Description Dimensions (With Current NOA) 1. Dekfast DF-#12-PH3 Insulation fastener for wood, SFS Group USA, Inc. steel and concrete decks 2. Dekfast DF-#14-PH3 Insulation fastener for wood, Various SFS Group USA, Inc. steel and concrete decks 3. Dekfast DF-#15-PH3 Insulation fastener for wood, Various SFS Group USA, Inc. steel and concrete decks • • • • . . 4. Dekfast PLT-H-2-7/8 Galvalume hex stress plate. 2 7/8" x . . .... .... • . •'' SFS Gr8ilp JAA, Inc. 4. 3 '/4" ...:.. .• •..... 5. #14 Roofgrip Insulation and membrane Various Inc • • • • • • OMG �... ... fastener • • • • • . "" 6. Flat Bottom Metal Plate A2-SS aluminized steel plate 3" square •.'..' OW* -s,'Ir1'6. ...... 7. Trufast #14 HD Fastener Insulation fastener for steel and : •' M1enloh, Brinck & Co. ' • wood decks U.13i?k6. • • • • • • 8. Trufast 3" Metal Insulation Round Galvalume AZ50 steel 3.23 round • 00 • • Al;enloh4Br� mn & Ca. Plate plate 3" round U.S ,O ft. 9. Polygrip Fasteners #12 Insulation fastener for wood, Various Polyglass USA, Inc steel and concrete decks 10. Polygrip Fastener #14 Insulation fastener for wood, Various Polyglass USA, Inc. steel and concrete decks 11. Polygrip Fastener #15 Insulation fastener for wood, Various Polyglass USA, Inc. steel and concrete decks 12. Polygrip Hex Plates Galvalume hex stress plate. 2 7/8" x Polyglass USA, Inc 3 '/4" 13. OMG 3 in. Ribbed Galvalume stress plate. 3" round OMG, Inc. Galvalume Plate (Flat) 14. OMG 3" Galvalume Steel Galvalume stress plate. 3" round OMG, Inc. Plate 15. Dekfast PLT-R-3 Galvalume stress plate. 3" round SFS Group USA, Inc. 16. Millennium One -Step A two component, low rise, Adco Products, Inc. dba Foamable Adhesive polyurethane foam adhesive Royal Adhesives & Sealants 17. Millennium One Step Green A two component, low rise, Adco Products, Inc. dba Foamable Insulation polyurethane foam adhesive Royal Adhesives & Adhesive Sealants 18. Millennium PG-1 Pump A two component, low rise, Adco Products, Inc. dba Grade Adhesive polyurethane foam adhesive Royal Adhesives & Sealants NOA No.: 19-0311.04 MIAMI•DADECOUNTY Expiration Date: 10/11/22 Approval Date: 03/21/19 Page 6 of 38 APPROVED SURFACING: TABLE 4 Chosen components must be applied according to manufacturer's application instructions. Number Product Product Application Specification Manufacturer Name Description Rate 1. Gravel To be installed in a flood coat 400 lbs/sq N/A Generic of approved asphalt at 60 lbs/sq 2. Slag To be installed in a flood coat 300 lbs/sq N/A Generic of approved asphalt at 601bs/sq 3. KM Acryl 15 A premium white or tinted 1-1'/z gal/sq ASTM D6083 Polyglass USA, elastomeric acrylic based roof • • .. • 41nc. ...... coating (water -based). A • polyester fabric may be used ...... .. ...... for reinforcement with this • • • • • • ' • 4. KM Acryl 15 QS coating. A premium white or tinted 1-1'/s gal/sq • • • • .... ASTMeR6883 . ..... Vyglass USA- • • quick setting, elastomeric • • • • • • • Inc. *fee:* acrylic based roof coating ;":': 96 (water -based). A polyester 000000 .0000 fabric may be used for • • • • • • reinforcement with this coating. 5. KM Acryl 25 A premium white or tinted 1-1'h gal/sq ASTM D6083 Polyglass USA, elastomeric acrylic based roof Inc. coating (water -based). A polyester fabric may be used for reinforcement with this coating. 6. KM Acryl 25 QS A premium white or tinted 1-1'h gal/sq ASTM D6083 Polyglass USA, quick setting, elastomeric Inc. acrylic based roof coating (water -based). A polyester fabric may be used for reinforcement with this coating. 7. KM -PS #220 A single component, solvent, 1.25 gal/sq ASTM D6694 Polyglass USA, white or tinted, silicone Inc. coating. 8. KM -PS #250 A premium grade high solids, 1.25 gal/sq ASTM D6694 Polyglass USA, white or tinted, single Inc. component, moisture cure, fluid applied silicone coating NOA No.: 19-0311.04 Expiration Date: 10/11/22 Approval Date: 03/21/19 Page 7 of 38 APPROVED SURFACING: TABLE 4 Chosen components must be applied according to manufacturer's application instructions. Number Product Product Application Specification Manufacturer Name Description Rate 9. PG 300 An asphalt cutback fibered roof 11/z-2 gal/sq ASTM D4479 Polyglass USA, coating. May be applied by Inc. brush or spray equipment to rejuvenate aged BUR 10. PG 600 Non-fibered aluminum roof 1/z-1 gaUsq ASTM D2824 Polyglass USA, coating. Type I .... Inc. . . .... ...... 11. PG 650 Fibered aluminum roof coating. 11/2-2 gaUsq AST1Q;�24 Polygdss U5,�,,,; • TZ041 Inc. . 12. PG 700 A premium white or tinted 1-11/2 gaUsq ASTNIW083 Polyglass UTAO • elastomeric acrylic based roof • • mac. coating (water -based). A • • • • ' polyester fabric may be used . . . . ...... for reinforcement with this • • • • coating. • • •' ' 13. PG 700 QS A premium white or tinted 14 %z gaUsq ASTM D6083 Polyglass USA, quick setting, elastomeric Inc. acrylic based roof coating (water -based). A polyester fabric may be used for reinforcement with this coating. 14. PG 800 An asphalt based, non-fibered 3 gaUsq in two ASTM D 1227 Polyglass USA, clay emulsion coats Inc. 15. PolyBrite 70 A premium white or tinted 1-1'/2 gaUsq ASTM D6083 Polyglass USA, elastomeric acrylic based roof Inc. coating (water -based). A polyester fabric may be used for reinforcement with this coating. 16. PolyBrite 70 QS A premium white or tinted 1-11/2 gal/sq ASTM D6083 Polyglass USA, quick setting, elastomeric Inc. acrylic based roof coating (water -based). A polyester fabric may be used for reinforcement with this coating. 17. PolyBrite 90 A premium grade high solids, 1.25 gal/sq ASTM D6694 Polyglass USA, white or tinted, single Inc. component, moisture cure, fluid applied silicone coating NOA No.: 19-0311.04 411 Mu► Wgua s COuN7Y Expiration Date: 10/11/22 Approval Date: 03/21/19 Page 8 of 38 4 r 1 1 APPROVED SURFACING: TABLE 4 Chosen components must be applied according to manufacturer's application instructions. Number Product Product Application Specification Manufacturer Name Description Rate 18. PolyBrite 95 A single component, white or 1.25 gaUsq ASTM D6694 Polyglass USA, tinted, solvent, moisture cure Inc. silicone coating. 19. POLYPLUS 60 Non-fibered aluminum roof '/2-1 gaUsq ASTM D2824 Polyglass USA, coating. Type I Inc. . . .... ...... 20. POLYPLUS 65 Fibered aluminum roof coating. 1'/� 2 gaUsq ASTMD2S24 Ydlygtass USA,'. 10000, ti �:.... Inc. •••••• 21. XtraFlex 60 Aluminum Non-fibered aluminum roof '/2-1 gal/sq ASTMO152824 Polyglass U3A; •' . Roof Coating coating. TNe I: .. .. . ".'lnc. * 0 0 .. . ..... . 22. XtraFlex 65 Aluminum Fibered aluminum roof coating. 1%-2 gaUsq ASTUJJZ824 Polyglass USA, . Roof Coating Fibered Tape If- : :Inc. • • .... 23. XtraFlex 70 Premium A premium white or tinted 1-1'/ gal/sq AST14 D&083 ... Polyglass U�4- • •: Acrylic FR Roof elastomeric acrylic based roof O . ; . Ac. Coating coating (water -based). A polyester fabric may be used for reinforcement with this coating. 24. XtraFlex 80 Emulsion An asphalt based, non-Fibered 3 gaUsq in two ASTM D 1227 Polyglass USA, Roof Coating clay emulsion coats Inc. 25. XtraFlex 30 An asphalt cutback fibered roof 1%-2 gal/sq ASTM D4479 Polyglass USA, Bituminous Roof coating. May be applied by Inc. Coating Fibered brush or spray equipment to rejuvenate aged BUR 26. XtraFlex SRC 8000 A single component, white or 1.25 gal/sq ASTM D6694 Polyglass USA, tinted, solvent, moisture cure Inc. silicone coating. 27. XtraFlex SRC 9600 A premium grade high solids, 1.25 gal/sq ASTM D6694 Polyglass USA, white or tinted, single Inc. component, moisture cure, fluid applied silicone coating NOA No.: 19-0311.04 Mwrn•oEweeountnr Expiration Date: 10/11/22 Approval Date: 03/21/19 Page 9 of 38 f EVIDENCE SUBMITTED: Test Agency Test Name/Report Report No. Date Factory Mutual Research 4470 2W7A7.AM 08.04.94 Corporation 4450 2D5A9.AM 06.22.99 4470 3000857 01.12.00 4470 3004091 01.12.00 4470 3001334 02.15.00 4470 3014692 08.05.03 4450 3014751 08.27.03 4450 3019317 �Q§.�0.04 4470 3024311 0.11.07.06 4470 3012321 '..' .907.2P.07 4470 3036182 •••••• 01.81.09 4470 RR202591 • • • ` • • 11Y.22.15 Trinity ERD TAS 114 11752.09.99-1 02.08.00 TAS 114 11751.05.03 :: • :: • • A19,16.03 TAS 117(B)-ASTM D903 020841.06.04...... 06.02.04 TAS 114 02762.03.05 : • 03.30.05 TAS 114 02764.09.05 ; • 09.09.05 TAS 114 P1739.01.07 :0J'n07 TAS 114 P1734.07.06-R1 a2ITO TAS 117(B)-ASTM D6862 C8500SC.11.07 11.30.07 TAS 114 & FM 4470 P7860SC.11.07 11.30.07 TAS 114(D) — ASTM D1876 P10070.10.08 10.09.08 TAS 114 (H) P13760.09.09 09.10.09 FM 4470 & TAS 114 P33970.03.11 03.15.11 ASTM D6163 / ASTM D 4601 P33960.03.11 03.15.11 ASTM D6163 P37590.03.13-2-R1 02.05.13 ASTM D6164 P37590.03.13-3A 03.06.13 TAS 114 P1738.02.07-R2 04.29.13 TAS 1-14 & TAS 117 (B) 11757.04.01-1-R1 04.30.13 ASTM D6509 P37590.03.13-1-R1 06.26.13 ASTM D6222 P37590.03.13-5-R1 07.01.13 ASTM D6164 P37590.07.13-1 07.02.13 TAS 114 & FM 4474 P41630.08.13 08.06.13 ASTM D4601 / TAS 117 P45940.09.13 09.04.13 ASTM D6222 P37590.09.13 09.12.13 ASTM D4601 / TAS 117 P45970.05.14 05.12.14 ASTM D6162 SC5170.05.15 05.08.15 ASTM D6162 SC5170.12.15-1 12.29.15 TAS 114 & FM 4474 PLYG-SC8905.05.16-1 05.17.16 TAS 114 & TAS 117 (B) 11757.12.00-1-R2 04.05.17 PRI Construction Materials ASTM D6222 PUSA-061-02-02 01.28.08 Technologies ASTM D6163 PUSA-064-02-02 02.27.08 ASTM D6222 PUSA-062-02-02 12.04.08 ASTM D6694 PUSA-134-02-01 05.16.14 NOA No.: 19-0311.04 QML•I)ADE C NTNTY Expiration Date: 10/11/22 04 Approval Date: 03/21/19 Page 10 of 38 EVIDJENCE SUBMITTED: Test A2ency MILMIAMI-OADE COUNTY APPROVED' Test Name/Report ASTM D6694 TAS 117(B) FM 4470 & TAS 114 Report No. Date PUSA-135-02-01 05.16.14 PUSA-202-02-01 05.08.17 PUSA-202-02-02 05.23.17 . . •••• ••f••• • • • •••••• •• •f•f•• • •••• • • • • •••••• •• • ••••• • • • • f • • • • • • • •• •••••• • • • • • • • • go NOA No.: 19-0311.04 Expiration Date: 10/11/22 Approval Date: 03/21/19 Page 11 of 38 Membrane Type: SBS/APP Deck Type 1: Wood, Non -Insulated Deck Description: "/32" or greater plywood or wood plank, fastened at 24" spans with 8d common nails at 4" o.c. or #8 wood screws at 6" o.c. System Type E(4): Base sheet is mechanically attached to roof deck. Membranes subsequently adhered. All General and System Limitations apply. Base Sheet: One p y of Elastobaset Elastobase P, Elastoshield HT, XtraFlex SBS Glass Base or XtraFlex SBS HT Base 650 fastened to the deck as described below: .... Fastening: Attach base sheet using 11 ga. annular ring shank nails and 1-5/8" diameter tin npS,sp�ced 8" •a o.c. in a 4" lap and 8" o.c. in three equally spaced staggered rows id V14Ldhter of the %fleet. Ply Sheet: One or more plies of Elastoflex SA V Elastoflex SA V FR, Elastofl,q*&' j .•V PLVe,, C;astofle% ... • SA V PLUS FR or XtraFlex SBS Base SA self -adhered. ' .. ...... .. . ... • r 090004 • s 909400 Membrane: One ply of Elastoflex SA P, Elastoflex SA P FR, Polyflex SA P, P&D=M P FR • Polyfresko •, G APP SA, Polyfresko G APP SA FR, Polyfresko G SBS SA, Polyf?esko 6 SBS,UJ1Z, """ PolyKool, Polyreflect, XtraFlex APP G SA, XtraFlex Kool APP S SA or*XtraFlex SBS G SA:.. • • self -adhered. • • . • • • . . Surfacing: Install one of the approved surfacing products listed in Table 4 to obtain desired coating or (Optional) required fire classification. Maximum Design Pressure: -52.5 psf; (See General Limitation #7) N MIAMI•DADE COUNTY OA No.: 19-0311.04 Expiration Date: 10/11/22 Approval Date: 03/21/19 Page 33 of 38 3/26/2019 ROOFING SYSTEMS I UL Product iQ Insulation::— Polyisocya nu rate (2-in. thick minimum), Glass fiber (15/16-in. thick minimum), perlite/polyisocya n u rate composite, peiit-;_/urethane composite (2-in. thick minimum). Base Sheet: — One or more layers "Duflex", "XtraFlex APP S" or "Polyflex" (heat fused or mechanically fastened), "Elastobase", "XtraFlex SBS Glass Base", "ElastoFlex T, "XtraFlex SBS Glass Interply" or Type G2 base sheet (hot mopped or mechanically fastened). Ply Sheet (Optional): — One or more layers "Duflex", "XtraFlex APP S" or "Polyflex" (heat fused), "Elastobase", "XtraFlex SBS Glass Base", "ElastoFlex W, "XtraFlex SBS Glass Interply", "ElastoFlex V-C" or Type G2 base sheet (hot mopped or mechanically fastened). Membrane: — "Polyflex G FR", "XtraFlex APP G HP", heat fused. 45. Deck: C-15/32 Incline: 1/2 Barrier Board: — Minimum 1/2 in. thick gypsum board or minimum 1/4 in. thick Georgia-Pacific Gypsum LLC "DensDeck® Roofboard" or "DensDeck Prime@ Roofboard" or "DensDeck DuraGuardl Roofboard" or minmum 1/4-in. thickUnited States Gypsum Co. "SECUROCKTM Roof Board Type FRX-G" are used directly over the combustible roof deck with all buttjoints staggered a minimum of 6-in. from plywood roof deck joints. Base Sheet (Optional): — Type G2 Base sheet, mechanically fastened. Ply Sheet: — "ElastoFlex SA V FR Base", (self -adhered). .... Membrane: — "PolyKool SA R" or "Polyreflect", (self -adhered). • • �.... ...... .. . ••• . • •• •.•.•••61 46. Deck: NC Incline:l/2 •...• ...... .r....Insulation (Optional): — PolYisocYanurate, Glass fiber, perlite/p fYisocYanurate composite, perlite/uretlwe comPosite� an thickness. ' ' """ .... . ..... Base Sheet: — One or more layers "Duflex", "XtraFlex APP S" or "Polyflex", heat fused or mechanically'f MDed; or dr?q,86moreWI? "Elastobase", "Elastobase Vented Base", "XtraFlex SBS Glass Base", "ElastoFlex W, "XtraFlex SBS Glass inte'rply" or Type G' , hot moppe e or mechanically fastened. ' �. Ply Sheet (Optional): — One or,more layers "Duflex", "XtraFlex APP S" or "Polyflex", heat fused; or ore orjr ore pljA'4attobas@", "Elastobase Vented Base", "XtraFlex SBS Glass Base", "ElastoFlex W, "XtraFlex SBS Glass Interply', "Elastoife4l-C" or Type G2, ho!•'��� mopped or mechanically fastened. •... • • Membrane: — "Polyflex G FR" or "XtraFlex APP G HP", heat fused. 47. Deck: C-15/32 Incline: 1/2 Insulation: — Polyisocyan u rate (2-in. thick minimum), Glass fiber (15/16-in. thick minimum), perlite/po lyisocyan u rate composite, perlite/urethane composite (2-in. thick minimum). Barrier Board: — Minimum 1/4 in. thick Georgia-Pacific Gypsum LLC "DensDeck® Roofboard" or "DensDeck Prime® Roofboard" or "DensDeck DuraGuardl Roofboard", United States Gypsum Co. "SECUROCK® Glass -Mat Roof Board" (Type SGMRX), National Gypsum "DEXcell Glass Mat Roof Board" or "DEXcell FV Glass Mat Roof Board" mechanically fastened with all butt joints staggered a minimum of 6-in. from the plywood roof deck joints. Base Sheet: — "ElastoFlex S6", "XtraFlex SBS POLY Base", "ElastoFlex P-C" (heat fused or mechanically fastened). Ply Sheet: — "ElastoFlex SF, "XtraFlex SBS POLY Base", "ElastoFlex P-C" (heat fused or mechanically fastened). Membrane: — "ElastoFlex S6 G FR", "ElastoFlex S6 G-C FR" or "Polyfresko G SBS. FR", (heat fused). 48. Deck: NC Incline: 1 Insulation (Optional): — Polyisocya nu rate, perlite, wood fiber or polyisocyanurate/perlite board, any thickness. Base Sheet: — "Elastobase", "XtraFlex SBS Glass Base" (poly/sand), mechanically fastened or "Polyflex SA Base", "ElastoFlex SA V Plus FR", "ElastoFlex SA V FR" or "ElastoFlex SA V FR Base Vent" (self -adhered) Ply Sheet (Optional): — "Elastobase", "XtraFlex SBS Glass Base" (poly/sa nd), heat fused or mechanically fastened, or "ElastoFlex SA V Plus FR", "ElastoFlex SA V FR" or "ElastoFlex SA V FR Base Vent", (self -adhered). Membrane: — "Polyflex SA P FR", "Polyfresko G SA P FR", "ElastoFlex SA P FR", "Polyfresko G SBS SA P FR", "ElastoFlex SA V FR HT, (self -adhered) or "Polyflex G FR", "XtraFlex APP G HP", "XtraFlex APP G FR", "Polyfresko G FR", "Duflex G FR", "XtraFlex APP Dual", "ElastoFlex S6 G FR", "Polyfresko G SBS FR", "ElastoFlex VG FR", "XtraFlex SBS POLY G", "XtraFlex SBS POLY G 7, "XtraFlex SBS Glass G", "XtraFlex SBS Glass G7 or "Elastoshield TS G FR", heat fused. 49. Deck: C-32 Incline: 2 Insulation (Optional): — Polyisocya nu rate, perlite, wood fiber or polyisocyanurate/perlite board, any thickness. Base Sheet: — "Elastobase" or "Elastobase Vented Base", mechanically fastened; or "ElastoFlex SA V FR", self -adhered. Ply Sheet (Optional): — "ElastoFlex SA V Plus FR", "ElastoFlex SA V FR" or "ElastoFlex SA V FR Base Vent", self -adhered. Membrane: — " PolYdlex SA P FR", "Polyfresko G SA P FR", "ElastoFlex SA P FR" or "Polyfresko G SBS SA P FR", self -adhered; or "Duflex G FR", "XtraFlex APP Dual", "Polyflex G FR", "XtraFlex APP G HP", "XtraFlex APP G FR", "ElastoFlex S6 G FR", "Polyfresko G SBS FR", https://iq.ulprospector.com/en/profile?e=149003