RF-17-3016Miami Shores Village
10050 N.E. 2nd Avenue NW
Miami Shores, FL 33138-0000
Phone: (305)795-2204
Project Address
Permit NO. R F-12-17- 3 016
Permit Type: Roof
Work Classification: Flat
Permit Status: APPROVED
Issue Date: 1/5/2018
Expiration: 07/04/2018
Parcel Number
Applicant
107 NW 93 Street
Miami Shores, FL
1131010330890
Block: Lot:
GLADYS TRIAS
Owner Information
Address
Phone
Cell
GLADYS TRIAS
107 NW 93 ST
MIAMI SHORES FL 33150-2234
Contractor(s)
Phone
ALL AMERICAN ROOFING INC (954)772-7663
Cell Phone
Valuation:
Total Sq Feet:
$ 12,986.00
1958
Type of Work: Re Roof
Additional Info: REMOVE AND INSTALL A NEW FLAT ROOF
Classification: Residential
Scanning: 3
Fees Due
Bond Type - Contractors Bond
CCF
DBPR Fee
DCA Fee
Education Surcharge
Permit Fee - New Roof
Scanning Fee
Technology Fee
Total:
Amount
$500.00
$7.80
$4.13
$2.75
$2.60
$275.00
$9.00
$10.40
$811.68
Pay Date
Invoice #
12/28/2017
01/05/2018
Bond #: 3603
Pay Type
RF-12-17-66005
Check #: 31714 $ 50.00 $ 761.68
Check #: 31740 $ 761.68 $ 0.00
Amt Paid Amt Due
Available Inspections:
Inspection Type:
Tin Cap
Final Roof
Roof in Progress
Renailing Affidavit
Review Roof
In consideration of the issuance to me of this permit, I agree to perform the work covered hereunder in compliance with all ordinances and regulations
pertaining thereto and in strict conformity with the plans, drawings, statements or specifications submitted to the proper authorities of Miami Shores Village. In
accepting this permit I assume responsibility for all work done by either myself, my agent, servants, or employes. I understand that separate permits are
required for ELECTRICAL, PLUMBING, MEC ICAL, WINDOWS, DOORS, ROOFING and SWIMMING POOL work.
OWNERS AFFIDAVIT: I certify,thatl the
construction and zoning. Futhermtire, I aut'i
o--going information is accurate and that all work will be done in compliance with all applicable laws regulating
ze the above -named contractor to do the work stated.
January 05, 2018
Date
Authorized Sign ture: 0 er" /
Applicant / Contractor / Agent
Building department Copy
January 05, 2018
iami hores illage
Building Department
10050 N.E.2nd Avenue
Miami Shores, Florida 33138
Tel: (305) 795.2204
Fax: (305) 756.8972
I8
RE: Permit # e t Z' l`�-1 � DATE: 1 / oil
INSPECTION AFFIDAVIT
1 job t^- n(k6AVIA)C licensed as a (n Contracto / Engineer/Architect,
(Print name and circle License
se Type) " �\ FS 468 Building Inspector
License #: CC.-C— b S�� 7 b
On or about I C 1/ I / Z ,
I (Date & time)
, I did personally inspect the roof deck nailing
work at I b7 iJ t et 04,14,1
(Complete Job Site Address)
Based upon that examination I have determined the installation was done according to the Hurricane Mitigation Retrofit
Manual (Based .n 53.844 F.S)
Sign
State of Florida
County of Dade:
The undersigned, being the first duly sworn, deposes and says that he/she is the contractor for the above property
mentioned.
Sworn to and subscribed before me this ! day of ('( ,. a l d
Notary Public, Sate of Florida at Large
A._ 1
*General, Building, Residential, or Roofing Contractors or any individual certified under' 468 F.S. to make s
permit # and address # clearly shown marked on the deck for each inspection
•••.o�10'�� MONALISA GIPSON
tPar n�e,�
•`� : Notary Public - State of Florida
* In
'? Commission # FF 964211
�•',o� oa°•• My Comm. Expires Mar 27, 2020
' """" Bonded hrou �h� . f i j, �h8'
roof with
oendcerl n„ /7l1 noninIF,,1 /OMO
BUILDING
PERMIT APPLICATION
Miami Shores Village
Building Department
10050 N.E.2nd Avenue, Miami Shores, Florida 33138
Tel: (305) 795-2204 Fax: (305) 756-8972
INSPECTION LINE PHONE NUMBER: (305) 762-4949
RECEIVED I
DEC 2,017
BY:
FBC 20i� Jt"
Master Permit No.'fq 17 -30 J (3
Sub Permit No.
EI BUILDING El ELECTRIC R-RtgSFING REVISION ❑ EXTENSION p RENEWAL
PLUMBING ❑ MECHANICAL PUBLIC WORKS ❑ CHANGE OF CANCELLATION ❑ SHOP
CONTRACTOR DRAWINGS
JOB ADDRESS: 10-7 NW ¶3 ST
City: FL Miami Shores County: Miami Dade Zip: 331S-0
Folio/Parcel#: 11-110) ' 033"o$G O Is the Building Historically Designated: Yes NO
Occupancy Type: Load: Construction Type: Flood Zone: BFE: FFE:
OWNER: Name (Fee Simple Titleholder): Cr I cAAlj' AA r 1 ctrN Phone#:
Address: 107 NW G S i
City: Ali iCAm; Ske1v.51 State: FL. Zip: 331S0
Tenant/Lessee Name: Phone#:
Email:
CONTRACTOR: Company Name: Ar 1I l4r"1e�'icc" g inPhone#: CtS�-1.772- 44,S
Address: 4Nei (. � �vS h 'QA d T s4 - z i - �1 `�'7 Zc k
City: Oc*Und 'Pc..r'k State: Ft- Zip: 3330
Qualifier Name: 'as,epI1 %NG nni`...9 Phone#:
State Certification or Registration #: GCGOSSr 7 C) Certificate of Competency #:
DESIGNER: Architect/Engineer: Phone#:
Address: City: State: �+ Zip:
Value of Work for this Permit: $ �o�t c1 • 00 Square/Linear Footage of Work: 1 CI S8
Type of Work: El Addition ❑ Alteration r❑ New Repair/Replaces El Demolition
ion
Description of Work: ► np�/C, C"a �LnSLi( k nr_...,) r(c—) Qoo1)
Specify colorcofcolor thru tile: ��}}
Submittal Fee $ -�0 Pl 1 i Permit Fee $ 'al S CCF $ -1 . 8o Co/CC $
Scanning Fee $ -1 Radon Fee $ 2 . 7 S DBPR $ I ^ I_3 Notary $ N,
Technology Fee $ I 0 AO Training/Education Fee $ 2 - 60 Double Fee $
Structural Reviews $ Bond $ 5OD\
TOTAL FEE NOW DUE $ 2.431 . is
(Revised02/24/2014)
Bonding Company's Name (if applicable)
Bonding Company's Address
City State Zip
Mortgage Lender's Name (if applicable)
Mortgage Lender's Address
City State Zip
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRIC, PLUMBING, SIGNS, POOLS,
FURNACES, BOILERS, HEATERS, TANKS, AIR CONDITIONERS, ETC
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING
YOUR NOTICE OF COMMENCEMENT."
Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subject to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site
for the first inspection which occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the
inspection will not be approved and a reinspection fee will be charged.
Signature
The foregoing i
ay of
me or who has produced
OWNER or AGENT
strument was acknowledged before me this
identification and who did take an oath.
NOTARY PUBLI MONALISA GIPSON
Notary Public - State of Florida
• Commission # FF 964211
Sign: set
:,r ��.. My Comm. Expires Mar 27, 2020
�.� no-O u:
Print:
Seal:
********************************
APPROVED BY
Signature
The f
I
S
CONTRACTOR%
i trument w,( acknowl
y of )- C—
,who s
as k►a¢ or why has produced
identification
NOTARY PUBL
Sign:
Print:
Seal:
diFed before me this
, 20 _ f�/, by
personally know yi to
as
d wIj did take an oath.
.ems s
I
a� P MONALISA GIPSON
o:P a
a* :_ Notary Public - State of Florida
:s '•' Commission # FF 964211
_II11 set
%FOFF��p ` My Comm. Expires Mar 27, 2020' '
" B^^ded through National Notary A-sfl.
a w
***************************************************************
Plans Examiner
Zoning
(Revised02/24/2014)
Structural Review
Clerk
hfi
iamiu hores °J illage
Building Department
10050 N.E.2nd Avenue
Miami Shores, Florida 33138
Tel: (305) 795.2204
Fax: (305) 756.8972
OWNERS'S AFFIDAVIT OF EXEMPTION
ROOF TO WALL CONNECTION HURRICANE MITIGATION RETROFIT FOR EXISTING SITE -
BUILT SINGLE FAMILY RESIDENTIAL STRUCTURES
PERSUANT TO SECTION 553.844 F.S.
To: Miami Shores Village Building Department
10050 NE 2nd Ave
Miami Shores, Fl 33138
Re: Owner's Name: 6- 1"�%� S M
Property Address: 107 NcZ' ST
Date:
Roofing Permit Number:
Dear Building Official:
I 6- I1,,A•1 rn T rkS?, certify that I am not required to retrofit the roof to wall connections of my
building because:
The just valuation for the structure for purpose of ad valorem taxation is less than $300,000.00, Please attach proof of ad
valorem taxation.
gll.
he building was constructed in compliance with the provisions of the Florida Building Code (FBC) or with the provisions
of 1994 edition of the South Florida Building Code (1994 SFBC)
State of Florida
County of Dade
G1cLdL/3
Rdnk me
""'MONALISA GIPSON
``tPRr P'UB'''.
;r `� Notary Public -State of Florida
Commission # FF 964211
My Comm. Expires Mar 27, 2020
? �" Bonded through National Notary Assn.
The undersigned, being the first duly sworn, deposes and says that he/she is the owner for the above property mentioned.
Sworn to and subscribed before me this t,) day of t) ec / f 7
Notary Public, Sate of Florida at Large
o When the just valuation of the structure for purpose of ad rem taxation is equal to or more than $300,000.00, and the building was not constructed with FBC nor a 1994
SFBC. Then you must provide a building application from a General Contractor for the Roof to Wall connection Hurricane Mitigation.
Revised on 5/21/2009
Miami
hores " illage
Building Department
10050 N.E.2nd Avenue
Miami Shores, Florida 33138
Tel: (305) 795.2204
Fax: (305) 756.8972
AFFIDAVIT OF COMPLIANCE WITH ROOF TO WALL CONNECTION HURRICANE MITIGATION
RETROFIT FOR EXISTING SITE -BUILT SINGLE FAMILY RESIDENTIAL STRUCTURES PURSUANT
TO SECTION 553.844 F.S.
To: Miami Shores Village Building Department
10050 NE 2nd Ave
Miami Shores, Fl 33138
Re: Owner's Name: G(c 'S M �;g
Property Address: t b7 MA) Ct sr
Roofing Permit Number:
Date:
Dear Building Official:
I G I cy'S 1n Tr=4c, certify that I have improved the roof to wall connections of the referenced
property as required by the Manual of Hurricane Mitigation Retrofits for Existing Site -Built Single Family Residential
Structures as adopted by the Florida Building Commission by Rule 9B-3,047 F.A.C.
State of Florida
County of Dade
MONALISA GIPSON
Notary Public - State of Florida
Commission # FF 964211
, My Comm. Expires Mar 27, 2020
�O O' Bonded through National Notary Assn.
Print Ne
Dir),7
The undersigned, being thes `ro sep s-s .ns says a he/she is the owner for the above property mentioned.
Sworn to and subscribed before me this
Notary Public, Sate of Florida at Large
(SEAL)
Revised on 5/21/2009
day of L 20
FINAL COMPLIANCE
9/25/2017
r►
Property Search Application - Miami -Dade County
PEDRO , AB
I�IAMI� i AI
When buying real estate property, you should not assume that property taxes will remain the same. Whenever there is a change in ownership, the assessed value of the property may reset to full
IMPORTANT market value, which could result in higher property taxes. Please use our Tax Estimator to approximate your new property taxes.
MESSAGE
The Property Appraiser does not send tax bills and does not set or collect taxes. Please visit the Tax Collector's website directly for additional information.
Address Owner Name Folio
SEARCH:
107 nw 93 st
PROPERTY INFORMATION
Folio: 11-3101-033-0890
Sub -Division:
MIAMI SHORES SEC 6
Property Address
107 NW 93 ST
Miami Shores, FL 33150-2234
Owner
GLADYS M TRIAS
Mailing Address
107 NW 93 ST
MIAMI SHORES, FL 33150-2234
PA Primary Zone
0800 SGL FAMILY - 1701-1900 SO
Primary Land Use
0101 RESIDENTIAL - SINGLE FAMILY : 1 UNIT
Beds / Baths / Half
Floors
Living Units
Actual Area
Living Area
Adjusted Area
Lot Size
Year Built
2/2/0
2
1,420 Sq.Ft
13,092.12 Sq.Ft
1950
Suite
Map View w Layers
http://www.miamidade.gov/propertysearch/#/
1/3
9/25/2017
Property Search Application - Miami -Dade County
Featured Online Tools
Comparable Sales
Non -Ad Valorem Assessments
Property Record Cards
Property Taxes
Report Homestead Fraud
Tax Estimator
Value Adjustment Board
ASSESSMENT INFORMATION
Year
Land Value
Building Value
Extra Feature Value
Market Value
Assessed Value
TAXABLE VALUE INFORMATION
2016 Aerial Photography Soft
Glossary
PA Additional Online Tools
Property Search Help
Report Discrepancies
Tax Comparison
TRIM Notice
2017 2016 2015
$288,379 $288,379 $212,601
$98,832 $98,832 $98,832
$5,554 $5,637 $4,576
$392,765 $392,848 $316,009
$112,441 $110,129 $109,364
2017 2016 2015
COUNTY
Exemption Value $50,000 $50,000 $50,000
Taxable Value $62,441 $60,129 $59,364
SCHOOL BOARD
Exemption Value $25,000 $25,000 $25,000
Taxable Value $87,441 $85,129 $84,364
CITY
Exemption Value $50,000 $50,000 $50,000
Taxable Value $62,441 $60,129 $59,364
REGIONAL
Exemption Value $50,000 $50,000 $50,000
http://www.miamidade.gov/propertysearch/#/ 2/3
9/25/2017 Property Search Application - Miami -Dade County
Taxable Value
BENEFITS INFORMATION
$62,441 $60,129 $59,364
Benefit Type 2017 2016 2015
Save Our Homes Cap Assessment Reduction $280,324 $282,719 $206,645
Homestead Exemption $25,000 $25,000 $25,000
Second Homestead Exemption $25,000 $25,000 $25,000
Note: Not all benefits are applicable to all Taxable Values (i.e. County, School Board, City, Regional).
FULL LEGAL DESCRIPTION
MIAMI SHORES SEC 6 PB 10-39
LOTS 23 8 24 BLK 133
LOT SIZE 106.440 X 123
OR 20584-2880 05 2002 4
SALES INFORMATION
Previous Sale Price OR Book -Page Qualification Description
05/01/2002 $0 20584-2880 Sales which are disqualified as a result of examination of the deed
06/01/1990 $79,000 14590-3016 Sales which are qualified
02/01/1981 $73,500 11029-1749 Sales which are qualified
06/01/1977 $30,000 09740-0818 Sales which are disqualified as a result of examination of the deed
06/01/1977 $1 09719-1288 Sales which are disqualified as a result of examination of the deed
For more information about the Department of Revenue's Sales Qualification Codes.
2017 2016 2015
LAND INFORMATION
Land Use
GENERAL
BUILDING INFORMATION
Building Number
1
EXTRA FEATURES
Description
Chain -link Fence 4-5 ft high
ADDITIONAL INFORMATION
Muni Zone PA Zone Unit Type Units Calc Value
R-14.25, R-15 0800 - SGL FAMILY - 1701-1900 SQ Front Ft. 106.44 $288,379
Sub Area Year Built Actual Sq.Ft. Living Sq.Ft. Adj Sq.Ft. Calc Value
1 1950 1,420 $98,832
Year Built
1981
The information listed below is not derived from the Property Appraiser's Office records. It is provided for convenience and is derived from other govemment agencies.
Units Calc Value
829 $5,554
http://www.miamidade.gov/propertysearch/#/ 3/3
ROOF ASSEMBLIES AND ROOFTOP STRUCTURES
Florida Building Code 5th Edition (2014)
High -Velocity Hurricane Zone Uniform Permit Application Form.
Section A (General Information)
DEC 28 2017
mit No. Process No.
Contractor's NameALL AMERICAN ROOFING
Address 107 NW 93 ST MAIMI FL 33150
Job
ROOF CATEGORY
Low Slope 0 Mechanically Fastened Tile
❑ Asphaltic
Shingles
0 New Roof
0 Metal Panel/Shingles
0 Prescriptive BUR-RAS 150
ROOF TYPE
Reroofing 0 Recovering
Low Slope Roof Area (SF)
ROOF SYSTEM
INFORMATION
Steep Sloped Roof Area (SF)
0 Mortar/Adhesive Set Tile
❑ Wood Shingles/Shakes •
• • •
•• •
••••.•
0 Repair
•• .
• • •
• ••
•
•••• •• •
• • • • •
••.. • ••
❑ 1Nainle•nance• . • •
• •
•• •• .. •
•
••
•
•
• •
..••.
• •
•.••.
• • • •
• • • •
•.••••
•T..otal•(SF) •
•
•
rJ s•
•
Section B (Roof Plan)
Sketch Roof Plan: Illustrate all levels and sections, roof drains, scuppers, overflow scuppers and overflow drains.
Include dimensions of sections and levels, clearly identify dimensions of elevated pressure zones and location of
parapets.
.•
•
_
74(..__
__.--07-1....
'
711-301
b
DATE
3UBJECT TO COMPLIANCE WI I H ALL EDE AL
3TAJE AND COUNTY RULES AND REGULATIONS
31
A_
!
1.-i-
PROVED
7C`.I`�G DEPT
75L DO DEPT
,i
15.32
FLORIDA BUILDING CODE 5th Edition (2014) — BUILDING
ROOF ASSEMBLIES AND ROOFTOP STRUCTURES
Florida Building Code 5th Edition (2014)
High -Velocity Hurricane Zone Uniform Permit Application Form.
Section C (Low Slope Application) Surfacing: N/A
Fill in specific roof assembly components
and identify manufacturer
(If a component is not used, identify as "NA")
System Manufacturer: GAF
Product Approval No.:14-1030.02
Design Wind Pressures, From RAS 128 or Calculations:
Pmax1:11)'Y Pmax2: 71 7 Pmax3:
Max. Design Pressure, from the specific Product
Approval system: -45
Deck: WOOD
Type:
n
Gauge/Thickness: 5 8
Slope:1 /8"/12"
Anchor/Base Sheet & No. of Ply(s): #75 BASE
Anchor/Base Sheet Fastener/Bonding Material:
1 1/4" RING SHANK NAILS & TINCAPS
Insulation Base Layer: N/A
Base Insulation Size and Thickness: N/A
Base Insulation Fastener/Bonding Material:
N/A
Top Insulation Layer: N/A
Top Insulation Size and Thickness: N/A
Top Insulation Fastener/Bonding Material:
N/A
Base Sheet(s) & No. of Ply(s): SEE ANCHOR
Base Sheet Fastener/Bonding Material:
SEE ANCHOR
Ply Sheet(s) & No. of Ply(s): RUBBEROID MOP SMOOTH
Ply Sheet Fastener/Bonding Material:
HOT ASPHALT
Top Ply: RUBBEROID MOP FR
Top Ply Fastener/Bonding Material:
HOT ASPHALT
Fastener Spacing for Anchor/Base Sheet Attachment:
Field: " oc @ Lap, # Rows 2 @ 12 " oc
Perimeter: 6 " oc @ Lap, # Rows 4 @ 6 " oc
Corner: 6 " oc @ Lap, # Rows 4 @ 6 " oc
Number of Fasteners Per Insulation Board:
•
•
Field Perimeter • • • Corner
—urn— • •• • • • •
Illustrate Components Notes] and Details as
Applicable: ••
Woodblocking, Gutter, Edge Teii. at'on, Stridl3ipg,•FJashing,
Continuous Cleat, Cant Strip, Base dashing, CountOr-
Flashing, Coping, Etc. • • • •
• • .
Indicate: Mean Roof Height, Parapet i-]eight, Ht lght of Base
Flashing, Component Material,Nigt$NaI Thickness, Fastener
Type, Fastener Spacing or Subfnit • • • • • •
..
..
...
•
I ..
•
Assembly notes:
447: sc
Ay 14
flu dere
sff
Ww61
• ' •
• •• •
•• ••• • .•.I
Parapet Cap
♦
FT.
notes:
v FT.
•
T
Parapet
Height
ll
Mean
Roof
Height
•
•
•
•
•
FLORIDA BUILDING CODE 5th Edition (2014) — BUILDING
15.33
SECTION 1524
HIGH VELOCITY HURRICANE ZONES — REQUIRED OWNERS NOTIFICATION FOR ROOFING
CONSIDERATIONS
1524.1 Scope. As it pertains to the section, it is the responsibility of roofing contractor to provide the owner with
the required roofing permit, and to explain to the owner the content of the section. The provisions of Section R4402
govern the minimum requirements and standards of the industry for roofing system installations. Additionally, the
following items should be addressed as part of the agreement between the owner ant the contractor. The owner's
initial in the designated space indicates that the item has been explained.
• •
• • • •
•• • •• •
2. 1 Renalling wood decks: When replacing roofing, the existing wood•reof.deck raa/ bade to
be renailed in accordance with the current provisions of Section R4403. (The reofcleok is usually.
concealed prior to removing the existing roof system). • • • • ..
•• •
•••• • ••
•
.•
.. . •
4. Exposed Ceiling: Exposed, open beam ceilings are where the ugciejiiig of the roof decking
can be viewed from below. The owner may wish to maintain the architectural appear4nce; tfleref'oje,
roofing nail penetration of the underside of the decking may not be acceptable. This.provideg tire option or,
maintaining the appearance.
•• • ••• •
••
••
6. 7'— Overflow scuppers (wall outlets): It is required that rainwater flows off so that the roof is
not overloaded from a buildup of water, Perimeter/edge wall or other roof extension may block this
discharge if overflow scuppers (wall outlets) are not provided. It may be necessary to install overflow
scuppers in accordance with the requirements of Sections R4402,,R4403 a • R4413.
OwnAgent's Si re Date
Property Address
Revised on 7/9/2009 LD;07/01/2015;
Date
Permit Number
•
•
06 - Roofing Systems Page 11 of 47
Insulation (Optional): — One or more layers perlite or wood fiber or glass fiber or polyisocyanurate or perlite/polyisocyanurate
composite or wood fiber/polyisocyanurate composite, any thickness, mechanically fastened or adhered with any UL Classified insulation
adhesive.
Base Sheet: — One ply Type G2 "GAFGLAS® #75 Base Sheet" or "Tri-Ply® #75 Base Sheet" or "GAFGLAS® #80 Ultima"^ Base Sheet"
or "GAFGLAS® Stratavent® Nailable Venting Base Sheet", fully adhered with hot roofing asphalt.
Ply Sheet (Optional): — Two or more plies Type G1 "GAFGLAS® Ply 4" or "Tri-Ply® Ply 4" or "GAFGLAS® Flex Ply 6" or "Tri-Ply® Ultra -
Flexible Ply 6", fully adhered with hot roofing asphalt.
Membrane (Optional): — "RUBEROID® Mop Granule" or "Intec Flex PRF" or "Tri-Ply® SBS Granule" or "RUBEROID® 30 Granule" or
"RUBEROID® 30 Granule FR" or "RUBEROID® Mop Smooth" or "RUBEROID® Mop Smooth 1.5" or "RUBEROID® Mop Plus Smooth" or
"RUBEROID® Mop Granule FR" fully adhered with hot roofing asphalt or "RUBEROID® HW Granule FR" or "RUBEROID® HW Plus Granule"
or "RUBEROID® HW Plus Granule FR" or "RUBEROID® HW Granule" or "RUBEROID® HW Smooth", torch applied.
Surfacing: — Roofing gravel, applied at 400-lbs./100-ft.2 embedded into a flood coat of hot roofing asphalt or No. 10 White Aggregate,
applied at a rate of 200-lbs./100-ft.2 embedded into "United Coatings'" FireShield MB Roof Coating" applied at a rate of 2-1/2 to
3-gal./100-ft.2.
Coating: — "TOPCOAT® EnergyCote'm Elastomeric Coating", applied at a rate of 1/2 to 1-gal./100-ft.2.
13. Deck: NC
•
Incline: 1/2
Membrane: — One or more plies "RUBEROID® Torch Smooth" or "Tri-Ply® APP Smooth" torch applied.
Surfacing: — Minimum 1/2-in. thick exterior grade ceramic plaza deck walking tile, adhered in thin -set and grouted per the
manufacturer's installation instructions.
Class B - Ballasted
•
1. Deck: C-15/32 Incline: 1/2 • • •
• • •
Insulation (Optional): — Minimum 2-in. thick polyisocyanurate mechanically fastened with the butt joints inlhe Asulatio: Staggered a • •
minimum of 6-in. from plywood deck joints. • • • •
Base Sheet: — One ply Type G2 "GAFGLAS® #75 Base Sheet" or "Tri-Ply® #75 Base Sheet" or "GAFGLAygZ BQilltima"" Base Sheet"
or "GAFGLAS® Stratavent® Nailable Venting Base Sheet" or "GAFGLAS® Stratavent® Perforated Venting Base Sheet" or "GAFt LAS® •
Flex Ply 6" or "Tri-Ply® Ultra -Flexible Ply 6", mechanically fastened or fully adhered with hot roofing asphalj • • • •• • • • • •
Ply Sheet: — Two or more plies Type G1 "GAFGLAS® Ply 4" or "Tri-Ply® Ply 4" or "GAFGLAS® Flex Ply 6" cw iri-Ply® Ultra-FleVele Ply
6", fully adhered with hot roofing asphalt. • •
Membrane (Optional): — "RUBEROID® Mop Granule" or "Intec Flex PRF" or "Tri-Ply® SBS Granule" or "RUBEROID® 304'rSryuTe; or • • • • •
"RUBEROID® 30 Granule FR" or "RUBEROID® Mop Smooth" or "RUBEROID® Mop Smooth 1.5" or "RUBERRiD®'Mop Plus Stnbobh" or • • • • • •
"RUBEROID® Mop Granule FR" fully adhered with hot roofing asphalt or "RUBEROID® HW Granule" or "RU9ERP l HW Plus Granule" or •
"RUBEROID® HW Granule FR" or "RUBEROID® HW Plus Granule FR" or "RUBEROID® HW Smooth", torchIppl&d.: ••
•
Surfacing: — Roofing gravel, applied at a rate of 400-lbs./100-ft.2 embedded into a flood coat of hot roofgng asp•halt or N•.•LO•Vllyte
Aggregate, applied at a rate of 200-lbs./100-ft.2 embedded into "TOPCOAT® Fireshield MB", applied at a mate of 2.1/2 to 1-gal./100-ft.2. • •
Coating: — "United Coatings"' FireShield MB Roof Coating" applied at a rate of 1/2 to 1-gal./100-ft.2. •• • • • • • • •
• •
••
Class A - Fully Adhered
1. Deleted.
2. Deleted.
3. Deleted.
4. Deleted.
5. Deleted.
6. Deleted.
7. Deleted.
8. Deleted.
9. Deck: C-15/32
Incline: 1/2
Barrier Board (Optional): — One or more layers minimum 1/4-in. thick Georgia-Pacific Gypsum LLC "DensDeck® Roofboard" or
"DensDeck® Prime Roofboard" or "DensDeck® DuraGuardr" Roofboard" or minimum 1/4-in. thick United States Gypsum Co.
"SECUROCK® Roof Board" (Type FRX-G) or "SECUROCK® Glass -Mat Roof Board" (Type SGMRX).
Insulation (Optional): — One or more layers perlite or glass fiber or 3/4-in. minimum or polyisocyanurate or urethane or
perlite/polyisocyanurate composite or perlite/urethane composite or phenolic, 1-1/2 in. minimum.
Base Sheet: — One or more plies Type G2 "GAFGLAS® #75 Base Sheet" or "Tri-Ply® #75 Base Sheet" or "GAFGLAS® #80 Ultima"'
Base Sheet" or "GAFGLAS® Stratavent® Nailable Venting Base Sheet" or "GAFGLAS® Stratavent® Perforated Venting Base Sheet"
mechanically fastened or fully adhered with hot roofing asphalt.
Ply Sheet: — One or more plies Type G1 "GAFGLAS® Ply 4" or "Tri-Ply® Ply 4" or "GAFGLAS® Flex Ply 6" or "Tri-Ply® Ultra -Flexible Ply
6" fully adhered with hot roofing asphalt.
Membrane: — "RUBEROID® Mop Granule FR" or "RUBEROID® Mop Plus Granule FR" or "RUBEROID® EnergyCap"' Mop Plus Granule
FR" fully adhered with hot roofing asphalt.
Coating (Optional): — "GAF Fibered Aluminum Coating" applied at a rate of 1-1/2 gal./100-ft.2.
10. Deck: C-15/32 d
Incline: 1/2
Barrier Board (Option : — One or more layers minimum 1/4-in. thick Georgia-Pacific Gypsum LLC "DensDeck® Roofboard" or
"DensDeck® P oofboard" or "DensDeck® DuraGuard"^ Roofboard" or minimum 1/4-in. thick United States Gypsum Co.
"SECUROCK® Roof Board" (Type FRX-G) or "SECUROCK® Glass -Mat Roof Board" (Type SGMRX).
Insulation (Optional): — Perlite or fiber glass or polyisocyanurate or urethane or perlite/polyisocyanurate composite.
Base Sheet: — One or more layers Type G2 "GAFGLAS® #75 Base Sheet" or "Tri-Ply® #75 Base Sheet" or "GAFGLAS® #80 Ultima""
Base Sheet" or "GAFGLAS® Stratavent® Nailab e Venting Base Sheet" or'"GAFGLAS® Stratavent® Perforated Venting Base Sheet" or
Type G3 "GAFGLAS® Mineral Surfaced Cap Sheet" or "Tri-Ply® BUR Granule Cap Sheet" mechanically fastened or fully adhered with hot
roofing asphalt.
\V
http://database.ul.com/cgi-bin/XYV/template/LISEXT/ 1 FRAME/showpage.html?name=... 11/30/2017
Page 12 of 47
j06 - Roofing Systems
Ply Sheet (Optional): wag. or more plies Type G1 "GG FGLA ® Ply. 4" or "Tri-Ply® Ply 4" or "GAFGLAS® Flex Ply 6" or "Tri-Ply® Ultra -
Flexible Ply 6" fully adhered with hot roofing asphalt.
Membrane: — "RUBEROID Mo Gr " or "RUBEROID® Mop Plus Granule FR" or "RUBEROID® EnergyCapT" Mop Plus Granule
FR" fully adhere wi hot roofing asphalt.
11. Deck: C-15/32
Incline: 1/2
Barrier Board (Optional): — One or more layers minimum 1/4-in. thick Georgia-Pacific Gypsum LLC "DensDeck® Roofboard" or
"DensDeck® Prime Roofboard" or "DensDeck® DuraGuard"" Roofboard" or minimum 1/4-in. thick United States Gypsum Co.
"SECUROCK® Roof Board" (Type FRX-G) or "SECUROCK® Glass -Mat Roof Board" (Type SGMRX).
Insulation (Optional): — Perlite or fiber glass or polyisocyanurate or urethane or perlite/polyisocyanurate composite, butt joints offset
a minimum of 6-in. from plywood deck joints.
Base Sheet: — One or more plies Type G2 "GAFGLAS® #75 Base Sheet" or "Tri-Ply® #75 Base Sheet" or "GAFGLAS® #80 Ultima""
Base Sheet" or "GAFGLAS® Stratavent® Nailable Venting Base Sheet" or "GAFGLAS® Stratavent® Perforated Venting Base Sheet" or
Type G3 "GAFGLAS® Mineral Surfaced Cap Sheet" or "Tri-Ply® BUR Granule Cap Sheet", mechanically fastened or fully adhered with hot
roofing asphalt.
Ply Sheet (Optional): — One or more plies Type G1 "GAFGLAS® Ply 4" or "Tri-Ply® Ply 4" or "GAFGLAS® Flex Ply 6" or "Tri-Ply® Ultra -
Flexible Ply 6" fully adhered with hot roofing asphalt.
Membrane: — One ply "RUBEROID® Torch Smooth" or "Tri-Ply® APP Smooth", torch applied or "RUBEROID® Mop Smooth" or
"RUBEROID® Mop Smooth 1.5" or "RUBEROID® Mop Plus Smooth" fully adhered with hot roofing asphalt.
Membrane: — "RUBEROID® Mop Granule FR" or "RUBEROID® Mop Plus Granule FR" or "RUBEROID® EnergyCapT" Mop Plus Granule
FR" fully adhered with hot roofing asphalt.
12. Deck: NC Incline: 1
• •
•
Barrier Board (Optional): — One or more layers minimum 1/4-in. thick Georgia-Pacific Gypsum LLC "DencDec 1)•Roofbo8rd" or • • • • • •
"DensDeck® Prime Roofboard" or "DensDeck® DuraGuardT" Roofboard" or minimum 1/4-in. thick United States Gypsum Cp.• • •
"SECUROCK® Roof Board" (Type FRX-G) or "SECUROCK® Glass -Mat Roof Board" (Type SGMRX). ••.... • •• • • •
Insulation (Optional): — Perlite or fiber glass or wood fiber or polyisocyanurate or urethane or perlite/poyi oeyanurate composite. • • • • • •
•Base Sheet: — One or more layers Type G2 "GAFGLAS® #75 Base Sheet" or "Tri-Ply® #75 Base Sheet" or CQFttAS® #80 UltimaT" • •
Base Sheet" or "GAFGLAS® Stratavent® Nailable Venting Base Sheet" or "GAFGLAS® Stratavent® Perforatetl•\iting Bass$heer or
Type G3 "GAFGLAS® Mineral Surfaced Cap Sheet" or "Tri-Ply® BUR Granule Cap Sheet" mechanically fastened pk?tGlly adh� reIl with hot • •
roofing asphalt.
Ply Sheet (Optional): — One or more plies Type G1 "GAFGLAS® Ply 4" or "Tri-Ply® Ply 4" or "GAFGLAS4 ¶Vx P4 6" or : i•.ly® Ultra- •• : • • •
Flexible Ply 6" fully adhered with hot roofing asphalt. • • • • • • •
Membrane: — "RUBEROID® Mop Granule FR" or "RUBEROID® Mop Plus Granule FR" or "RUBEROID® Enur�yGap:," Mop Plus Granule • • • •: •
FR" mechanically fastened or fully adhered with hot roofing asphalt. • • • • •
• • • •
13. Deck: NC Incline: 1/2 • •
• • • • •
• •
• • • •
Barrier Board (Optional): — One or more layers minimum 1/4-in. thick Georgia-Pacific Gypsum LLC "DensDeck® Roofboardll or.
"DensDeck® Prime Roofboard" or "DensDeck® DuraGuardT" Roofboard" or minimum 1/4-in. thick United States Gypsum Co. • •
"SECUROCK® Roof Board" (Type FRX-G) or "SECUROCK® Glass -Mat Roof Board" (Type SGMRX).
Insulation (Optional): — Perlite or fiber glass or wood fiber or polyisocyanurate or urethane or perlite/polyisocyanurate composite.
Base Sheet (Optional): — One or more plies Type G2 "GAFGLAS® #75 Base Sheet" or "Tri-Ply® #75 Base Sheet" or "GAFGLAS® #80
UltimaT" Base Sheet" or "GAFGLAS® Stratavent® Nailable Venting Base Sheet" or "GAFGLAS® Stratavent® Perforated Venting Base
Sheet" or Type G3 "GAFGLAS® Mineral Surfaced Cap Sheet" or "Tri-Ply® BUR Granule Cap Sheet", mechanically fastened or fully
adhered with hot roofing asphalt.
Ply Sheet (Optional): — One or more plies Type G1 "GAFGLAS® Ply 4" or "Tri-Ply® Ply 4" or "GAFGLAS® Flex Ply 6" or "Tri-Ply® Ultra -
Flexible Ply 6" fully adhered with hot roofing asphalt.
Membrane: — One ply "RUBEROID® Torch Smooth" " or "Tri-Ply® APP Smooth", torch applied or "RUBEROID® Mop Smooth" or
"RUBEROID® Mop Smooth 1.5" or "RUBEROID® Mop Plus Smooth" fully adhered with hot roofing asphalt.
Membrane: — One ply "RUBEROID® Mop Granule FR" or "RUBEROID® Mop Plus Granule FR" or "RUBEROID® EnergyCapT" Mop Plus
Granule FR" fully adhered with hot roofing asphalt.
14. Deleted.
15. Deck: C-15/32
Incline: 1/2
Barrier Board (Optional): — One or more layers minimum 1/4-in. thick Georgia-Pacific Gypsum LLC "DensDeck® Roofboard" or
"DensDeck® Prime Roofboard" or "DensDeck® DuraGuardT" Roofboard" or minimum 1/4-in. thick United States Gypsum Co.
"SECUROCK® Roof Board" (Type FRX-G) or "SECUROCK® Glass -Mat Roof Board" (Type SGMRX).
Insulation (Optional): — Polyisocyanurate or wood fiber or perlite or glass fiber any thickness, mechanically fastened.
Base Sheet: — One or more plies Type G2 "GAFGLAS® #75 Base Sheet " or "Tri-Ply® #75 Base Sheet" or "GAFGLAS® #80 UltimaT"
Base Sheet" or "GAFGLAS® Stratavent® Nailable Venting Base Sheet" or "GAFGLAS® Stratavent® Perforated Venting Base Sheet",
mechanically. fastened or fully adhered with hot roofing asphalt.
Membrane: — One or more plies "Ruberoid® 30 Granule" or "RUBEROID® 30 Granule FR" or "RUBEROID® EnergyCapT" 30 Granule FR"
fully adhered with hot roofing asphalt.-
16. Deck: C-15/32 Incline: 1/2
Barrier Board (Optional): — One or more layers minimum 1/4-in. thick Georgia-Pacific Gypsum LLC "DensDeck® Roofboard" or
"DensDeck® Prime Roofboard" or "DensDeck® DuraGuardT" Roofboard" or minimum 1/4-in. thick United States Gypsum Co.
"SECUROCK® Roof Board" (Type FRX-G) or "SECUROCK® Glass -Mat Roof Board" (Type SGMRX).
Insulation (Optional): — Polyisocyanurate or wood fiber or perlite or or glass fiber, any thickness, mechanically fastened.
Base Sheet: — One or more plies Type G2 "GAFGLAS® #75 Base Sheet" or "Tri-Ply® #75 Base Sheet" or "GAFGLAS® #80 Ultima"'
Base Sheet" or "GAFGLAS® Stratavent® Nailable Venting Base Sheet" or "GAFGLAS® Stratavent® Perforated Venting Base Sheet",
mechanically fastened or fully adhered with hot roofing asphalt.
Ply Sheet: — One or more plies "RUBEROID® 20 Smooth" or "RUBEROID® Mop Smooth" or "RUBEROID® Mop Smooth 1.5" or
"RUBEROID® Mop Plus Smooth" fully adhered with hot roofing asphalt.
Membrane: — One or more plies "Ruberoid® 30 Granule" or "RUBEROID® 30 Granule FR" or "RUBEROID® EnergyCapT" 30 Granule FR"
fully adhered with hot roofing asphalt.
17. Deleted.
http://database.ul.com/cgi-bin/XYV/template/LISEXT/ 1 FRAME/showpage.html?name=... 11 /30/2017
Membrane Type:
Deck Type 1:
Deck Description:
System Type E(1):
SBS/SBS Cold Applied
Wood, Non -insulated
19/32" or greater plywood or wood plank decks
Base sheet mechanically fastened to roof deck.
All General and System Limitations shall apply.
Fire Barrier:
(optional)
Base sheet:
Fastening
Options:
MIAMI-DADE COUNTY
APPROVED
FireOutTM Fire Barrier Coating, VersaShield® Fire -Resistant Roof Deck Protection
or Securock® Gypsum -Fiber Roof Board.
GAFGLAS® #80 Ultima T" Base Sheet, GAFGLAS® Stratavent® EliminatorT"
Nailable Venting Base Sheet, Ruberoid® 20, Ruberoid® SBS Heat -Weld' Smooth
or Ruberoid® SBS Heat-WeldTM 25 base sheet mechanically fastened to deck as
described below:
•
GAFGLAS® Ply 4, GAFGLAS® FlexPlyT" 6, GAFGLAS® #75 B'aseSllet orgy •
of above base sheets attached to deck with approved annular ringslabnk nails:aritj,. •
tin caps at a fa.siener slicing of 9" o.c. at the lap staggered and ih•tt*D'1'ows 12" •
O.C._ln the field. •••• ;•• •
• • • • •
(Maximum Design Pressure —45 psf. See General Limitation # •'' • • •
. ••••• ••• .
GAFGLAS® Ply 4, GAFGLAS® FlexPlyTM 6, GAFGLAS® #75 B5se•3heet or any • •
of above base sheets attached to deck with Drill -Tee" #12 Faster er; Mill-TecT" •
#14 Fastener or Drill-TecT" XHD Fastener and Drill-TecT" 3" Steel Plate, Drill-..:.
TecT" AccuTrac® Flat Plate or Drill-TecT" AccuTrac® Recessed?.late Oastall:d 12".
o.c. in 3 rows. One row is in the 2" side lap. The other rows are equally space&.:
approximately l2" o.c. in the field of the sheet.
(Maximum Design Pressure —45 psf. See General Limitation #7)
GAFGLAS® FlexPlyT" 6, GAFGLAS® #75 Base Sheet or any of above base sheets
attached to deck with approved annular ring shank nails and tin caps at a fastener
spacing of 9" o.c. at the 4" lap staggered and in two rows 9" o.c. in the field.
(Maximum Design Pressure —52.5 psf. See General Limitation #7)
GAFGLAS® #80 Ultima' Base Sheet, Ruberoid® 20, Ruberoid® Mop Smooth,
base sheet attached to deck with approved annular ring shank nails and tin caps at
a fastener spacing of 9" o.c. at the 4" lap staggered and in two rows 9" o.c. in the
field.
(Maximum Design Pressure —60 psf See General Limitation #7)
GAFGLAS® #75 Base Sheet or any of above base sheets attached to deck with
Drill -Teel" #12 Fastener, Drill-TecT" #14 Fastener or Drill-TecT" XHD Fastener
and Drill-TecT" 3" Steel Plate, Drill-TecT" AccuTrac® Flat Plate or Drill-TecT"
AccuTrac® Recessed Plate installed 12" o.c. in 4 rows. One row is in the 2" side
lap. The other rows are equally spaced approximately 9" o.c. in the field of the
sheet.
(Maximum Design Pressure —60 psf. See General Limitation #7)
Any of above base sheets attached to deck approved annular ring shank nails and
3" inverted Drill-TecT" insulation plates at a fastener spacing of 9" o.c. at the 4"
lap staggered in two rows 9" in the field.
(Maximum Design Pressure —60 psf. See General Limitation #7)
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 26 of 30
Fastening GAFGLAS® #75 Base Sheet or any of above base sheets attached to deck with
Options: Drill-TecTM #12 Fastener, Drill-TecTM #14 Fastener or Drill-TecTM XHD Fastener
(Continued) and Drill -Tee" 3" Steel Plate, Dri11-TecTM AccuTrac® Flat Plate or Drill-TecTM
AccuTrac® Recessed Plate installed 8" o.c. in 4 rows. One row is in the 2" side
lap. The other rows are equally spaced approximately 9" o.c. in the field of the
sheet.
(Maximum Design Pressure —75 psf. See General Limitation #7)
Ply Sheet: (Optional) One more plies GA�FGi..E .S®4 GAFGLAS® FlexPlyTM 6,
GAFGLAS® #80 Ultima Base Sheet, Ruberoid® Mop Smooth or Ruberoid® 20
sheet adhered in a full mopping of approved asphalt applied wit in the EVT range
and at a rate of 20-401hs.Lq`
Membrane: One or more plies of Ruberoid® Mop Smooth, Ruberoid® Mop 170 FR, Ruberoid®
Mop Granule, RoofMatchTM SBS Modified Granular, Ruberoid® Mop Plus
Granule, Ruberoid®20, Ruberoid®30, Ruberoid®EnergyCap- 30.FR $BS •
Membrane, Ruberoid® 30 FR or Ruberoid® Mop FR in adhered ina.fulZmootYng
of proved a halter , nl,_ed within the EVT range and at a rate df•1Q-440 lbs./rick ..'
Or •
One or more plies of Ruberoid® Mop Smooth, Ruberoid® Mop OW* 114 • .
RoofMatchT" SBS Modified Granular, Ruberoid® Mop 170 FR, R}tgIQid® Ivfo�•'�
Plus Granule, Ruberoid®20, Ruberoid® 30, Ruberoid®EnergyCap'34,FR SBS. . • • •
Membrane, Ruberoid® 30 FR or Ruberoid® Mop FR adhered in,TM 102 SRS
Membrane Adhesive at an application rate of 1-2 gal./sq. • •
Surfacing: Alp Optional on granular surfaced membranes; required for smooth anembinwes.
"Chosen components must be applied according to manufacturer's application
instructions. All coatings must be listed within a current NOA.
1. Gravel or slag applied at 400 lbs./sq. and 300 lbs./sq. respectively in a flood coat
of Approved asphalt at 60 lbs./sq.
2. GAFGLAS® Mineral Surfaced Cap Sheet, Tri-Ply® Mineral Surfaced Cap Sheet
or GAFGLAS®EnergyCapTM BUR Mineral Surfaced Cap Sheet adhered in a full
mopping of approved asphalt applied within the EVT range and at a rate of 20-40
lbs./sq.
3. Topcoat® Membrane, Topcoat® MB Plus (to be used as a primer with Topcoat®
Membrane) or Topcoat® Surface Seal SB applied at 1 to1.5 gal./sq.
Maximum Design
Pressure: See Fastening Options
MIAMI•DADE COUNTY
APPROVED
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 27 of 30
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
BOARD AND CODE ADMINISTRATION DIVISION
NOTICE OF ACCEPTANCE (NOA)
GAF
1 Campus Drive
Parsippany, NJ 07054
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction
materials. The documentation submitted has been reviewed and accepted by Miami -Dade County RER -
Product Control Section to be used in Miami Dade County and other areas where allowed by the
Authority Having Jurisdiction (AHJ). • .
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
Miami, Florida 33175-2474
T (786)315-2590 F (786) 315-2599
www. miamidade. eov/economy
This NOA shall not be valid after the expiration date stated below. The Miami -Dade CeunUy Produet •
Control Section (In Miami Dade County) and/or the AHJ (in areas other than Miami DV:gCQunty) i ••• •. .•
reserve the right to have this product or material tested for quality assurance purposes. elf tliihproduct of • •
material fails to perform in the accepted manner, the manufacturer will incur the expense•of such tesfing, • •
and the AHJ may immediately revoke, modify, or suspend the use of such product or matctiel within •..'
•
their jurisdiction. RER reserves the right to revoke this acceptance, if it is determinedy;ltMi tmi-Dade..• '
County Product Control Section that this product or material fails to meet the requirements of the • • • •
applicable building code. •• •• ••
• .
This product is approved as described herein, and has been designed to comply with le FFd ida BttiIlding
Code including the High Velocity Hurricane Zone of the Florida Building Code. "•• •
DESCRIPTION: GAF Ruberoid® Modified Bitumen Roof System for Wood Decks.
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state
and following statement: "Miami -Dade County Product Control Approved", unless otherwise noted
herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has
been no change in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or
change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an
endorsement of any product, for sales, advertising or any other purposes shall automatically terminate
this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of
NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and
followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is
displayed, then it shall be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Official.
This NOA renews and revises NOA No. 14-0611.01 and consists of pages 1 through 30.
The submitted documentation was reviewed by Jorge L. Acebo.
MIAMI•DADE COUNTY
APPROVED
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 1 of 30
Product
Matrix' 102 SBS Membrane
Adhesive
GAFGLAS® #75
Base Sheet
GAFGLAS® #80 Ultima' Base
Sheet
GAFGLAS® FlexPly' 6
GAFGLAS® Ply 4
GAFGLAS® Mineral Surfaced
Cap Sheet
GAFGLAS® EnergyCapt
BUR Mineral Surface Cap
Sheet
GAFGLAS® Stratavent®
Eliminator' Perforated
Venting Base Sheet
GAFGLAS® Stratavent®
Eliminator' Perforated
Nailable Venting Base Sheet
Ruberoid® SBS
Heat-WeldTM Smooth
Ruberoid® SBS
Heat-WeldTM Granule
RoofMatch'
SBS Modified Granular
Ruberoid® SBS
Heat-Weldtm 170 FR
MIAMI-DADE COUNTY
APPROVED
ROOFING SYSTEM APPROVAL
Category:
Sub -Category:
Material:
Deck Type:
Maximum Design Pressure:
Roofing
Modified Bitumen
APP/SBS
Wood
-75 psf.
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT:
TABLE 1
Test
Specification
ASTM D3019
Dimensions
5 gallons
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
107 sq. ft.
(9.9 m2)
39.37"
(1 meter) Wide
ASTM D4601
ASTM D4601
ASTM D2178
ASTM D2178
ASTM D3909
ASTM D3909
ASTM D4897
ASTM D4897
ASTM D6164
ASTM D6164
ASTM D6164
ASTM D6164
Product • •
..... .
Description
Fiber reinforced rubb•
v•i, ild told-appfl®l
adhesive for modified bltjimen roof •
systems. • . •,
Type II asphalt impregnated and coated
glass mat base sheet' • • • • •
0 •. •
Type II asphalt imps egtiat d and coated,
fiberglass base shee$. '• ••
Type VI asphalt imprggriated ghtss felt
with asphalt coating. •' • •
•
Type IV asphalt impregnated glass felt
with asphalt coating.
Asphalt coated, glass fiber mat cap sheet
surfaced with mineral granules.
Asphalt coated, glass fiber mat cap sheet
surfaced with mineral granules with
factory applied EnergyCoteTM
Fiberglass base sheet coated on both sides
with asphalt. Surfaced on the bottom side
with mineral granules embedded in
asphaltic coating with factory perforations.
A nailable, fiberglass base sheet coated on
both sides with asphalt. Surfaced on the
bottom side with mineral granules
embedded in asphaltic coating.
Non -woven polyester mat coated with
polymer -modified asphalt and smooth
surfaced.
Non -woven polyester mat coated with
polymer -modified asphalt and surfaced
with mineral granules.
Non -woven polyester mat coated with
SBS polymer -modified asphalt and
surfaced with colored mineral granules.
Non -woven polyester mat coated with fire
retardant polymer -modified asphalt and
surfaced with mineral granules.
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 2 of 30
......
•
......
•
•
....•,
•
•
.••..
• •
••••.
•.,,,.
.•
•.....
• •
•.....
• •
Product
Ruberoid® SBS
Heat-WeldTM Plus
Ruberoid® SBS
Heat -Weld`" Plus FR
Ruberoid®EnergyCap`" SBS
Heat-WeldT`" Plus FR
Ruberoid® SBS
Heat-WeldT"' 25
Ruberoid® Mop Granule
Ruberoid® Mop Smooth
Ruberoid® Mop Plus
Ruberoid® Mop 170FR
Ruberoid® Mop FR
Ruberoid® Torch Smooth
Ruberoid® Torch Granule
Ruberoid®EnergyCap`" Torch
Granule FR
Ruberoid® EnergyCap- Torch
Granule Plus FR
RoofMatchT'
APP Modified Granular
Ruberoid® Torch FR
MIAMI-DADE COUNTY
APPROVED
Dimensions
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
39.37"
(1 meter) Wide
107 sq. ft.
(9.9 m2)
1 meter
(39.37") Wide
Test
Specification
ASTM D6164
ASTM D6164
ASTM D6164
ASTM D6163
ASTM D6164
ASTM D6164
ASTM D6164
ASTM D6164
ASTM D6164
ASTM D6222
ASTM D6222
ASTM D6222
ASTM D6222
ASTM D6222
ASTM D6222
Product
Description
Non -woven polyester mat coated with
polymer -modified asphalt and surfaced
with mineral granules.
Non -woven polyester mat coated with fire
retardant polymer -modified asphalt and
surfaced with mineral granules.
Non -woven polyester mat coated with fire
retardant polymer -modified asphalt and
surfaced with mineral:ranules and ith:.
factory applied EnergyCote.. • •
Non -woven polyester trMa•Lwvated v 1tl? • • •
polymer -modified asphaySi?d smooth.
surfaced. ••• •
Non -woven polyeste>: v jpated with •
polymer -modified asphal,t4hd surf dad.
with mineral granuldt• • • • •
Non -woven polyester mat eoated.with•
polymer -modified asphal and srsooth' •
•
surfaced.
• •••
Non -woven polyester mat coated with•
polymer -modified asphalt and surfaced
with mineral granules.
Non -woven polyester mat coated with fire
retardant polymer modified asphalt and
surfaced with mineral granules.
Non -woven polyester mat coated with fire
retardant polymer -modified asphalt and
surfaced with mineral granules.
Non -woven polyester mat coated with
APP modified asphalt and smooth
surfaced.
Non -woven polyester mat coated with
APP modified asphalt and
surfaced with mineral granules
APP modified cap membrane with a torch
grade bottom surface and a mineral
granular top surface coated with factory
applied EnergyCoteT"
APP modified cap membrane with a torch
grade bottom surface and a mineral
granular top surface coated with factory
applied EnergyCoteTM.
Non -woven polyester mat coated with
APP polymer -modified asphalt and
surfaced with colored mineral granules.
Non -woven polyester mat, coated with fire
retardant asphalt modified bitumen
membrane with granule surface.
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 3 of 30
......
•, .•....
• •
......
•
•....
•
••••.
•
000000
•
•••...
•
•..•..
•
Product
Ruberoid® 20
Ruberoid® 30
Ruberoid® 30 FR
Ruberoid® EnergyCap`" 30 FR
SBS Membrane
Ruberoid® Dual FR
Topcoat® Elastomeric Roofing
Membrane
Topcoat® MB Plus
Topcoat®
Surface Seal SB
FireOut'" Fire Barrier Coating
VersaShield®
Fire -Resistant Roof Deck
Protection
MIAMI-DADE COUNTY
APPROVED
Dimensions
1 meter
(39.37") Wide
1 meter
(39.37") Wide
1 meter
(39.37") Wide
1 meter
(39.37") Wide
39.37" (1 meter)
Wide
1, 5 or 55 gallons
5 or 55 gallons
5 gallons
5, 55 gallons
42" x 100' rolls
Test
Specification
ASTM D6163
ASTM D6163
ASTM D6163
ASTM D6163
ASTM D6162
ASTM D6083
Proprietary
ASTM D6083
Proprietary
ASTM D226
Product
Description
SBS modified asphalt base sheet reinforce
with a glass fiber mat.
Non -woven fiberglass mat coated with
polymer modified asphalt and surfaced
with mineral granules.
Non -woven fiberglass mat coated with fire
retardant, polymer -modified asphalt and
surfaced with mineral granules.
Non -woven fiberglass Inat.00ated vCitl3 ere
retardant, polymer-mod?fled asphaltand
surfaced with mineral ra$dlt;s anSwit,1L •
factory applied Energy• •
Non -woven polyester old fberglaSpat.
coated with file retardantqpplymer- • •
modified asphalt and'3urfaced wit • •.
mineral granules. : • •; • •
An acrylic, water based a tstomeric .
membrane system deAined to ptbtect••
various types of roofing surface •. •
Water based, low VOC primer used tU•
block asphalt bleed -through.
Solvent based sprayable thermoplastic
rubber sealant designed to protect and
restore aged roof surfaces and to increase
a roofs reflectivity.
Low VOC, water -based fire barrier
coating.
Non -Asphaltic, fire resistant fiberglass -
based underlayment.
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 4 of 30
•.....
•
•
000000
••••••
• •
•••••
• •
•••••
••••••
•
•
•
000000
• •
••••••.
•
APPROVED INSULATIONS:
Product Name
EnergyGuardTM Polyiso Insulation
EnergyGuardTM RA Polyiso Insulation
EnergyGuard"'' RN Polyiso Insulation
EnergyGuard'M Perlite Recover Board
EnergyGuard' Perlite Roof Insulation
EnergyGuardTM RA Composite Polyiso
Insulation
Structodek® High Density Fiber Board
Securock® Gypsum -Fiber Roof Board
APPROVED FASTENERS:
Fastener
Number
Product
Name
1. Drill-TecTM #12 Fastener
2. Drill-TecTM #14 Fastener
3. Drill-TecTM XHD Fastener
4. Drill-TecTM AccuTrac® Flat
Plate
5. Drill-TecTM ASAP 3S
6. Drill-TecTM AccuTrac®
Recessed Plate
7. Drill-TecTM 3" Steel Plate
8. Drill-TecTM 3" Standard
Steel Plate
MIAMI-DADE COUNTY
APPROVED
Table 2
Product Description
Polyisocyanurate foam insulation
Polyisocyanurate foam insulation
Polyisocyanurate foam insulation
Perlite recover board
Perlite roof board
Polyisocyanurate/wood fiberboard
or perlite composite
High density wood fiber
Gypsum board
TABLE 3
Product
Description Dimensions
Carbon steel fastener used Various
in steel or wood decks.
Carbon steel fastener used Various
in steel, wood or concrete
decks.
Carbon steel extra heavy Various
duty fastener used in steel
decks.
AZ -SS aluminized steel 3" x 3"
plate for use with Drill-
TecTM #12 Fastener, Drill-
Tec'M #14 Fastener and
Drill-TecTM #15 Fastener.
Drill-TecTM #12 fastener Various
with Drill-TecTM 3"
Standard Steel Plate.
Galvalume Steel plate for 3" x 3"
use with Drill-TecTM
fasteners.
Round galvalume steel 3"
stress plate for use with
Drill-JecTM fasteners.
Round galvalume plated 3"
steel stress plate with
reinforced ribs for use with
Drill-TecTM fasteners.
Manufacturer
(With Current NOA)
GAF
GAF
GAF
• GAF
• •
•.....
••44F
•....
•
• •
.••...
•• .
• • .
• •.
Blue liberBoard,
..
United Statts GypsuliaJL i .
.•••...
•
•
•
• . ......
•
Manufacturer .
(With Current NOA)
GAF
GAF
GAF
GAF
GAF
GAF
GAF
GAF
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 5 of 30
EVIDENCE SUBMITTED:
Test Agency
Factory Mutual Research Corp.
Underwriters Laboratories
Trinity Engineering
IRT-ARCON Inc.
Trinity I ERD
MIAMI-DADE COUNTY
APPROVED
Test Identifier
3001276
1B9A8.AM
3D4Q2.AM
OD1A8.AM
R1306
4483.04 97-1
02-005
02-014
01-039
G30250.02.10-2
G30250.02.10-3-R2
G31360.03.10
G33470.01.11
G34140.04.11-2
G34140.04.11-4-R2
G34140.04.11-5-R3
G40620.07.12-2
G40630.01.14-1
G40630.01.14-2A
G40630.01.14-2A-1-R1
G40630.01.14-2B-R1
G40630.01.14-2C
G40630.03.14
G43190.03.14-1
G43190.03.14-2
G43190.05.14-R1
G43190.11.13-1
G43610.01.14
G46160.02.15-2D
G46160.03.15
G46160.09.14-2A
G46160.09.14-3A
G46160.09.14-3B
G46160.09.14-3C
G46160.12.14-3E
G6850.08.08
G6850.08.08-R1
G6850.10.08
G6850.11.08
SC6870.08.14-R1
Description Date
FMRC 4470 01/28/99
FMRC 4470 09/04/97
FMRC 4470 04/30/97
FMRC 4470 04/01/98
UL 790 07/22/13
TAS 114 • Q6/06/91 • •„•
•. • .
•• •
TAS 114 •••;03/01/02 ••••
TAS 114 '"• 13t1/08/02 .
TAS 114 •'�•••.'U3/01/
•• • .
ASTM D6222 ":••31/11/1Q. •,
ASTM D3909 • • •' 06/03/16. •. •
ASTM D6164 ' 03/31/10 •
ASTM D6164 • • •01/13:11.;.
ASTM D6163 ••. • :04/25711
ASTM D4601 6/4/2n
ASTM D4897 6/4/2015 •
ASTM D6222 07/17/12
ASTM D6163 01/06/14
ASTM D5147 01/07/14
ASTM D6164 04/10/14
ASTM D6164 01/16/15
ASTM D6164 01/07/14
ASTM D5147 03/06/14
ASTM D5147 03/06/14
ASTM D5147 03/06/14
ASTM D5147 05/20/14
ASTM D6222 11/15/13
ASTM D5147 01/22/14
ASTM D6163 02/03/15
ASTM D6163 03/11/15
ASTM D5147 09/09/14
ASTM D6164 09/09/14
ASTM D6164 09/09/14
ASTM D5147 09/09/14
ASTM D6164 12/29/14
ASTM D6163 08/01/08
ASTM D6164 04/14/11
ASTM D6222 10/06/08
ASTM D6222 02/17/09
ASTM D3909 09/04/14
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 6 of 30
EVIDENCE SUBMITTED: (CONTINUED)
Test Agency
PRI Construction Technologies LLC.
Momentum Technologies, Inc.
MIAMI-DADE COUNTY
APPROVED
Test Identifier Description
GAF-084-02-01 ASTM D6083
GAF-122-02-01 TAS 139
GAF-245-02-01 ASTM D6083
GAF-276-02-01Rev ASTM E2178
ASTM D6083
GAF-306-02-01 ASTM E96
GAF-314-02-01 ASTM D2178
GAF-315-02-01 ASTM D2178
GAF-369-02-01 ASTM C1289
GAF-464-02-01 ASTM C1289
GAF-499-02-01 ASTM D6083
GAF-500-02-01 ASTM D6083
AX04C9A ASTM D6162
• •
• • •
•• •
Date
07/08/05
05/07/06
06/10/10
01/04/11
•
07/07/ 11
08/23/l r• •:.
'..•0$/23/1f
••..l /22/1'�•. S.
• • •:40Z/06/ 14 .
•' • • •Q3/12/14
"•03/1244'.• •
•• ••• 06/o5/OO;. .
• • •
••
•
•
�....•
•.. •
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 7 of 30
...•...
.
•
•
• •
•••...
• •
•••..
• •
•••••
••..••
•
.•••:.
• •
...•••
• •
WOOD DECK SYSTEM LIMITATIONS:
1 A slip sheet is required with GAFGLAS® Ply 4 and GAFGLAS® FlexPlyTM 6 when used as a
mechanically fastened base or anchor sheet.
2. Minimum 'A" DensDeck® Roof Board or '/z" Type X gypsum board is acceptable to be installed
directly over the wood deck.
GENERAL LIMITATIONS:
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials
Directory for fire ratings of this product.
2. Insulation may be installed in multiple layers. The first layer shall be attached in compliance with
Product Control Approval guidelines. All other layers shall be adhered in a full mowingi)f :.
approved asphalt applied within the EVT range and at a rate of 20-40 lbs./sq., or mechanically • ......
•
attached using the fastening pattern of the top layer ...... • • • •
•• ..
3. All standard panel sizes are acceptable for mechanical attachment. When applied in appidved` •"• •
asphalt, panel size shall be 4' x 4' maximum. •. • :• • . • •
: • • • •
4. An overlay and/or recovery board insulation panel is required on all applications obeLGlossed cell ••
foam insulations when the base sheet is fully mopped. If no recovery board is usediihe false sheer. •. •
••:.. •
shall be applied using spot mopping with approved asphalt, 12" diameter circles, ?.4''4:c.; or strip • •••...
mopped 8" ribbons in three rows, one at each side lap and one down the center ofThe sheet allowing ••
a continuous area of ventilation. Encircling of the strips is not acceptable. A 6" breakVall ba ..... ......
placed every 12' in each ribbon to allow cross ventilation. Asphalt application of either systertl shhall. : •• • •. •
•
be at a minimum rate of 12 lbs./sq. Note: Spot attached systems shall be limited to a maximum;
design pressure of -45 psf.
5. Fastener spacing for insulation attachment is based on a Minimum Characteristic Force (F') value of
275 lbf., as tested in compliance with Testing Application Standard TAS 105. If the fastener value,
as field-tested, are below 275 lbf. insulation attachment shall not be acceptable.
6. Fastener spacing for mechanical attachment of anchor/base sheet or membrane attachment is based
on a minimum fastener resistance value in conjunction with the maximum design value listed within
a specific system. Should the fastener resistance be less than that required, as determined by the
Building Official, a revised fastener spacing, prepared, signed and sealed by a Florida Registered
Engineer, Architect, or Registered Roof Consultant may be submitted. Said revised fastener spacing
shall utilize the withdrawal resistance value taken from Testing Application Standards TAS 105 and
calculations in compliance with Roofing Application Standard RAS 117.
7. Perimeter and corner areas shall comply with the enhanced uplift pressure requirements of these
areas. Fastener densities shall be increased for both insulation and base sheet as calculated in
compliance with Roofing Application Standard RAS 117. Calculations prepared, signed and sealed
by a Florida registered Professional Engineer, Registered Architect, or Registered Roof Consultant
(When this limitation is specifically referred within this NOA, General Limitation #9 will not
be applicable.)
8. All attachment and sizing of perimeter nailers, metal profile, and/or flashing termination designs
shall conform to Roofing Application Standard RAS 111 and applicable wind load requirements.
9. The maximum designed pressure limitation listed shall be applicable to all roof pressure zones (i.e.
field, perimeters, and corners). Neither rational analysis, nor extrapolation shall be permitted for
enhanced fastening at enhanced pressure zones (i.e. perimeters, extended corners and corners).
(When this limitation is specifically referred within this NOA, General Limitation #7 will not
be applicable.)
10. All products listed herein shall have a quality assurance audit in accordance with the Florida
Building Code and Rule 61G20-3 of the Florida Administrative Code.
END OF THIS ACCEPTANCE
MIAMI-DADE COUNTY
APPROVED
NOA No.: 14-1030.02
Expiration Date: 11/06/18
Approval Date: 11/05/15
Page 30 of 30
DBA:
Business Name: A
Owner Name: MANNING, JOSEPH
Business Location: 94 W PROSPECT RD
FT LAUDERDALE
Business Phone: 954-772-7663
Rooms
Seats
ECEPT ----
115 S. Andrews Ave., Rm. A-100, Ft. Lauderdale, FL 33301-1885 — 954-831-4000
VALID OCTOBER 1,2017 THROUGH SEPTEMBER 30, 2018
AMERICAN RCIOFING 1NC ReceiPt #:a8F-IINEV; SHEET ML"1-7Y rou
Business Type: (ROOFING CONTRA': 1.0
Business Opened:01/.7/1990
State/Countyleert/Reg:cCco 55570
Exemption Code:
Employees
10
Machines
Professionals
For Vending Business Only
Number of a e : Vending Type:
Tax Amount
Transfer Fee
NSF Fee
Penalty
.
Prior Years —
Collection Cost
Tothl Paid
27 . 00
0.00
0.00
2.70
0.00
0.00
29.70
THIS RECEIPT MUST BE POSTED CONSPICUOUSLY IN YOUR PLACE OF BUSINESS
THIS BECOMES A TAX RECEIPT
WHEN VALIDATED
Mailing Address:
MANNING, JOSEPH
944 W PROSPECT RD
OAKLAND PK, FL 3 330 9
This tax is levied for the privilege of doing business within Broward County and is
non -regulatory in nature. You must meet all County and/or Municipality planning
and zoning requirements. This Business Tax Receipt must be transferred when
the , business is sold.; business name has changed or you have moved the
business location_This receipt does not indicate that the business is legal or that
it is in compliance with State or local laws and regulations.
...-2017 2018
Receipt #03A-17-00000164
Paid 10/06/2017 29.70
T
1