REV-17-2354BUILDING
PERMIT APPLICATION
El BUILDING ❑ ELECTRIC
Miami Shores Village
Building Department
10050 N.E.2nd Avenue, Miami Shores, Florida 33138
Tel: (305) 795-2204 Fax: (305) 756-8972
ON LINE PHONE NUMBER: (305) 762-4949
PLUMBING ❑ MECHANICAL
dROOFING
RECEIVED
oct o_ a ion
�
FBC 201`
.
aster Permit No. 11— Z 3 S
Sub Permit No.VE 11— 2
EVISIO " ❑ EXTENSION ❑ RENEWAL
ElPUBLIC WORKS ❑ CHANGE OF ❑ CANCELLATION SHOP
CONTRACTOR DRAWINGS
JOB ADDRESS: / / 7 S ik.) 6 / OU` r
City: Miami Shores County: Miami Dade Zip: 3 51 k
Folio/Parcel#: / / 2Z3 2. Oz -e (2 2- f/ Is the Building Historically Designated: Yes NO \Z ----
Occupancy
Occupancy Type:$i2 Load: Construction Type: Flood Zone: BFE: FFE:
OWNER: Name (Fee Simple Titleholder): /4610 / 0 L tj. cz yr) oke Phone#:
Address: Id 1,1.- 1•3 C I, 0 St-
City:
YCity: 1
.'
s S" 0 / -e S State: 1 L Zip: 33
Tenant/Lessee Name: Phone#:
Email:
CONTRACTOR:: Company Name: VA -r 4R.( 1' °,�i v�` a Phone#: 30S-- ??J"---14- 57"
Address: IC1{v(7 LD 006 (o
City: 1`-`1 t- 4CYV14 State: rt- Zip: 3�
Qualifier Name: 1(i ,t3vvvt Phone#: 3 a"4 /e-li?
State Certification or Registration #: [' -O L3 2 (p () z I Certificate of Competency #:
DESIGNER: Architect/Engineer: Phone#:
Address: City: State: Zip:
Value of Work for this Permit: $ I s i s-17 ` 0 0 Square/Linear Footage of Work: (// 3 co
Type of Work: ❑ Addition ❑ Alteration �+ ❑�New � Repair/Replace I:1 Demolition
Description of Work: Pt b 0 A 1 L� L"JNA AvN v2�15-S
Specify color of color thru tile:
Submittal Fee $ Permit Fee $ CCF $ CO/CC $
Scanning Fee $ Radon Fee $ DBPR $ Notary $
Technology Fee $ Training/Education Fee $ Double Fee $
Structural Reviews $ Bond $
TOTAL FEE NOW DUE $ CO
(Revised02/24/2014)
Bonding Company's Name (if applicable)
Bonding Company's Address
City
State Zip
Mortgage Lender's Name (if applicable)
Mortgage Lender's Address
City State Zip
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRIC, PLUMBING, SIGNS, POOLS,
FURNACES, BOILERS, HEATERS, TANKS, AIR CONDITIONERS, ETC
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING
YOUR NOTICE OF COMMENCEMENT."
Notice to Applicant: As a condition to the issuance of a building permit with an estimated value exceeding $2500, the applicant must
promise in good faith that a copy of the notice of commencement and construction lien law brochure will be delivered to the person
whose property is subject to attachment. Also, a certified copy of the recorded notice of commencement must be posted at the job site
for the first inspection which occurs seven (7) days after the building permit is issued. In the absence of such posted notice, the
inspection will not be approved and a reinspection fee will be charged.
Signature
OWNER or -AGENT
The foregoing instrument was acknowledged before me this Q
day of 0 ,20 /% ,by
At.la Oi/fCl6 , who is personally known to
me or who has produced as
identification and who did take an oath.
NOTARY PUBLIC:
CONTRACTOR
The foregoing instrument was acknowledged before
me this
day of mm , 20 /"..) , by
who is personally known to
me or who has produced as
identification and who did take an oath.
NOTARY PUBLIC:
EXPIRES June 04, 2021
ea :
SSI
e 782
EXPIRES June 01' 02
******************************s**q**0*j******************************************************************
APPROVED BY
(Revised02/24/2014)
s` 7 Plans Examiner
•/
Structural Review
Zoning
Clerk
ROOF ASSEMBLIES AND ROOFTOP STRUCTURES
Florida Building Code 5th Edition (2014)
High -Velocity Hurricane Zone Uniform Permit Application Form.
Master Permit No. fPc-Z3S3 1Process N. • •
•. • .1
Contractor's Name �--fr e44.A..` fri ..
••••
..•
•
•1
r •
Job Address L V) S � L / U 5 S t •••• .... • t
• . • .
••.. ...•
ROOF CATEGORY. • • • • • ••
.. .... . `
Low Slope 0 Mechanically Fastened Tile •
.iid Mort•riA
ad•hes•ive Set Tiles
O Asphaltic Shingles 0 Metal Panel/Shingles 0 Wood Shingtets/Shaos.:. .1
0 Prescriptive BUR -RAS 150
ROOF TYPE
O New roof 0 Repair 0 Maintenance d Reroofing 0 Recovering
ROOF SYSTEM INFORMATION
Low Slope Roof Area (SF) (e) (.0 Steep Sloped Roof AREA (SSF) 17w Total (SF) 4:57(0
Section A (General Information)
1
1
1
1
1
• • •
•• •
• .• •
• •
••
• 1•
•
1
1
1
1
Section B (Roof Plan) 1
Sketch Roof Plan: Illustrate all levels and sections, roof drains, scuppers, overflow scuppers and overflow drains. Include dimen- 1
sions of sections and levels, dearly identify dimensions of elevated pressure zones and location of parapets. 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
111
1
1
1 11111 1
i111111
(10111111111111111111111111
11§1
FLORIDA BUILDING CODE — BUILDING, 5th EDITION (2014)
15.37
Copyright to, or licensed by, ICC (ALL RIGHTS RESERVED); accessed by Eliezer Palacio on Jun 8, 2015 10:32:12 AM pursuant to License
Agreement. No further reproductions authorized.
INTERNATIONAL CODE COUNCIL'
MIAMI
COUNTY
Pg 11- 2,353 J12fz`�I7-23SY
Miami Shores Village
1nDROVED
BY
DATE
"11( D`, -PT
vd-7
DEPARTMENT OF REGULATORY AND ECONOIVTIC RESOURCES �....,. .
BOARD AND CODE ADMINISTRATION DIVISION
') 11'I IA''::.'E WITH ALL FEDERAL
(4( /7
NOTICE OF ACCEPTANCE (NOA),
Lomanco, Inc.
2101 West Main Street
Jacksonville, AR 72076
SCOPE:
This NOA is being issued un
documentation submitted has been reviewe • an
be used in Miami -Dade County and other areas where allowed by the Authority
�S AYD 111-GUI.ATIONS
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
www.miamidade.Hov/economy
use of construction materials. The
PERA - Product Control Section to
aving Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control
Section (in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reserve the right to
have this product or material tested for quality assurance purposes. If this product or material fails to perform in
the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately
revoke, modify, or suspend the use of such product or material within their jurisdiction. PERA reserves the right
to revoke this acceptance, if it is determined by Miami -Dade County Product Control Section that this product or
material fails to meet the requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: BIB -12, BEB-12, BIB-12TR, BEB-12TR Whirlybirds
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews NOA No.11-0822.05 and consists of pages 1 through 7.
The submitted documentation was reviewed by Gaspar J Rodriguez.
MIAMI-DADE COUNTY
APPROVED
NOA No.: 16-0510.26
Expiration Date: 08/16/21
Approval Date: 06/30/16
Page 1 of 7
ROOFING COMPONENT APPROVAL
Category:
Sub -Category:
Material:
Roofing
Ventilation
Aluminum
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT:
Product
BIB -12 WhirlyBird®
BIB-12TR Whirlybird®
BEB-12 WhirlyBird®
,BEB-12TR Whirlybird®
Turbine Cap
Dimensions
12" wide at base 17-1/8" high
Vanes 0.0175" thick
Elbow 0.0305" thick
Base 0.025" thick
12" wide at base 20-'/2" high
Vanes 0.0175" thick
Elbow 0.0305" thick
Base 0.025" thick
12" wide at base 17-1/8" high
Vanes 0.0175" thick
Elbow 0.0305" thick
Base 0.025" thick
12" wide at base 20-1" high
Vanes 0.0175" thick
Elbow 0.0305" thick
Base 0.025" thick
Test Product
Specification Description
TAS 100(A) Turbine ventilation system, internally
braced, for shingle installation.
TAS 100(A) Turbine ventilation system, internally
braced, for tile intallation.
TAS 100(A)
Turbine ventilation system,
externally braced, for shingle
installation.
TAS 100(A) Turbine ventilation system,
externally braced, for tile intallation.
12" dia. TAS 100(A) Turbine cap to be installed in the
event of a Hurricane Warning.
TRADE NAMES OF PRODUCTS MANUFACTURED BY OTHERS:
Product
Asphalt Roof Cement
Asphalt Primer
Roofing Nails
Dimensions
Test
Specification
ASTM D 4586
ASTM D 41
Minimum #12 x 11/4" TAS 114
Sheet Metal Screws Minimum #10 x '/2" TAS 114
MANUFACTURING LOCATION:
1. Jacksonville, AR
MIAMI•DADE COUNTY
APPROVED
Product
Description
Asbestos -free, asphalt based
roof cement.
Asphalt Primer
Corrosion resistant annular ring
shank nails
Sheet metal screw
Manufacturer
generic
generic
generic
generic
NOA No.: 16-0510.26
Expiration Date: 08/16/21
Approval Date: 06/30/16
Page 2 of 7
EVIDENCE SUBMITTED:
Test Agency
Center for Applied Engineering
Center for Applied Engineering
PRI Construction Materials Technologies
PRI Construction Materials Technologies
MIAMI•DADE COUNTY
APPROVED
Test Identifier Test Name Date
MDC -117 TAS 100(A) 03/95
MTS -257493B TAS 100(A) 12/95
LOM -012-02-02 TAS 100(A) 05/21/07
LOM -020-02-01 TAS 100(A) 07/20/11
NOA No.: 16-0510.26
Expiration Date: 08/16/21
Approval Date: 06/30/16
Page 3 of 7
APPROVED APPLICATIONS
Trade name: BIB -12 WhirlyBird®, BEB-12 WhirlyBird®
System Type A: Mechanical attachment of turbine vent over composition shingles.
Cutout: At chosen location (see Lomanco's instructions for proper placement) and
centered between two roof rafters, cut a 12" diameter hole through shingles
and sheathing boards. Seal around top and sides of hole with approved
roofmg cement.
Installation: Determine roof pitch in compliance with Lomanco's instructions and align
roof pitch number on elbow with indicator line on flashing. Place three short
screws through holes that line up with pre -drilled holes in base.
Place mounting base unit flat on the shingles on its flashing, and coat
underside of base flashing with roofing cement. In its pitch -adjusted
position, carefully slide upper half of flashing up roof beneath shingles
previously rolled back until base is centered over cutout. Rolling back the
shingles where necessary, and rechecking pitch setting for vertical
alignment, secure the base unit to the roof deck with a minimum of fourteen
ring shank roofing nails, equally spaced, approximately 'A" from edge of
base per detail drawing "Base". Nails shall be of sufficient length to
penetrate through roof sheathing a minimum of '/2". Apply roofing cement to
underside of shingles overlapping flashing, and press them down onto the
flashing. Nail down flashing not covered by shingles `/2" to 1" from outer
edge with equally spaced ring shank roofing nails.
Rotate top of elbow to level position by turning counterclockwise. Place
locking clamp across seam and tighten as shown in Lomanco's instructions
with approved sheet metal screw. Seal all seams and nails with approved
roofmg cement.
Position whirlybird on the base. Line up the pre -drilled holes in the brackets
and base and fasten with approved long sheet metal screws.
After installation, verify that whirlybird turns freely. If necessary, minor
adjustment may be made by gently prying lowest point of turbine upward to
remove any wobble.
Net Free Area: Refer to manufacturers published literature
Note: Apply roofing cement to seal all exposed flashing edges and seams.
MIAMI•DADE COUNTY
APPROVED
NOA No.: 16-0510.26
Expiration Date: 08/16/21
Approval Date: 06/30/16
Page 4 of 7
APPROVED APPLICATIONS (CONTINUED)
Trade name: BIB-12TR Whirlybird®, BEB-12TR Whirlybird®
System Type A: Mechanical attachment of turbine vent for tile or slate roofing.
Cutout: At chosen location (see Lomanco's instructions for proper placement) and
centered between two rafters, cut a 12" diameter hole through sheathing
boards.
Installation:
After application of 301b. felt and 901b. roofing material (hot mopped) per
Roofing Application Standards RAS 118,119,120, cut 12" diameter hole in
roofing membranes to match previous hole cut in sheathing.
Rotate top of elbow clockwise and level in both directions. Prime both sides
of base flashing with ASTM D 41 primer, and coat underside of base
flashing with ASTM D 4586 flashing cement. Center base over hole and
secure the base unit to the roof deck with a minimum of fourteen ring shank
roofing nails, equally spaced, approximately 3/4' from edge of base per detail
drawing "Base". Cut a piece of 901b. roofing material a minimum width of
30" x 30" and cut a 12" diameter hole in the center of the roofing material.
Place the piece of roofing material over base and hot mop in place. Seal
inside center hole of cap sheet with approved flashing cement. Place
locking clamp across seam and tighten as shown in Lomanco's instructions
with supplied fastener. Seal all seams with approved roofing cement.
Position Whirlybird® on elbow and attach using three sheet metal screws
provided. Check to see that Whirlybird® turns freely. If necessary, minor
adjustment may be made by gently prying lowest point of turbine upward to
remove any wobble.
Net Free Area: Refer to manufacturers published literature
Note: Apply roofing cement to seal all exposed flashing edges and seams.
MIAMI•DADE COUNTY
APPROVED
NOA No.: 16-0510.26
Expiration Date: 08/16/21
Approval Date: 06/30/16
Page 5 of 7
LIMITATIONS:
1. Refer to applicable building codes for required ventilation.
2. BIB -12, BEB-12 Whirlybird® turbine roof ventilators shall be installed over composition
shingles roofs only.
3. BIB -12, BEB-12, BIB-12TR, BEB-12TR, Whirlybird® turbine roof ventilators shall not be
installed on roof mean heights greater than 33 feet.
DETAIL DRAWINGS
Nod Every 4"-6" 0.C.
Approximately 3/4' From Edge
BASE
MIAMI-DADE COUNTY
APPROVED
80.187
R0.187
0.500
m_125 THRU (3 EQUAL SPACES)
.060
NOA No.: 16-0510.26
Expiration Date: 08/16/21
Approval Date: 06/30/16
Page 6 of 7
DETAIL DRAWINGS (CONT'D)
BIB -12, BIB-12TR
}
BEB-12, BEB-12TR
END OF THIS ACCEPTANCE
MIAMI•DADE COUNTY
APPROVED
NOA No.: 16-0510.26
Expiration Date: 08/16/21
Approval Date: 06/30/16
Page 7 of 7